From: Christian Marangi Date: Mon, 24 Jul 2023 03:25:28 +0000 (+0200) Subject: net: dsa: qca8k: enable use_single_write for qca8xxx X-Git-Tag: v6.6.7~2294^2~15 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2c39dd025da489cf87d26469d9f5ff19715324a0;p=platform%2Fkernel%2Flinux-starfive.git net: dsa: qca8k: enable use_single_write for qca8xxx The qca8xxx switch supports 2 way to write reg values, a slow way using mdio and a fast way by sending specially crafted mgmt packet to read/write reg. The fast way can support up to 32 bytes of data as eth packet are used to send/receive. This correctly works for almost the entire regmap of the switch but with the use of some kernel selftests for dsa drivers it was found a funny and interesting hw defect/limitation. For some specific reg, bulk write won't work and will result in writing only part of the requested regs resulting in half data written. This was especially hard to track and discover due to the total strangeness of the problem and also by the specific regs where this occurs. This occurs in the specific regs of the ATU table, where multiple entry needs to be written to compose the entire entry. It was discovered that with a bulk write of 12 bytes on QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2 were written, but QCA8K_REG_ATU_DATA1 was always zero. Tcpdump was used to make sure the specially crafted packet was correct and this was confirmed. The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1 resulted in an entry somehow possible as the first bytes of the mac address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in QCA8K_REG_ATU_DATA2. Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and QCA8K_REG_ATU_FUNC correctly written. A speculation on the problem might be that there are some kind of indirection internally when accessing these regs and they can't be accessed all together, due to the fact that it's really a table mapped somewhere in the switch SRAM. Even more funny is the fact that every other reg was tested with all kind of combination and they are not affected by this problem. Read operation was also tested and always worked so it's not affected by this problem. The problem is not present if we limit writing a single reg at times. To handle this hardware defect, enable use_single_write so that bulk api can correctly split the write in multiple different operation effectively reverting to a non-bulk write. Cc: Mark Brown Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Christian Marangi Cc: stable@vger.kernel.org Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index 09b8064..efe9380 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -576,8 +576,11 @@ static struct regmap_config qca8k_regmap_config = { .rd_table = &qca8k_readable_table, .disable_locking = true, /* Locking is handled by qca8k read/write */ .cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */ - .max_raw_read = 32, /* mgmt eth can read/write up to 8 registers at time */ - .max_raw_write = 32, + .max_raw_read = 32, /* mgmt eth can read up to 8 registers at time */ + /* ATU regs suffer from a bug where some data are not correctly + * written. Disable bulk write to correctly write ATU entry. + */ + .use_single_write = true, }; static int