From: Pete Zaitcev Date: Thu, 5 Jan 2006 08:26:30 +0000 (-0800) Subject: [PATCH] USB: ub 05 Bulk reset X-Git-Tag: v3.12-rc1~38995 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2c2e4a2e07f4c16486dd2ac859eb9c558b1c9935;p=kernel%2Fkernel-generic.git [PATCH] USB: ub 05 Bulk reset For crying out loud, they have devices which do not like port resets. So, do what usb-storage does and try both bulk and port resets. We start with a port reset (which usb-storage does at the end of transport), then do a Bulk reset, then a port reset again. This seems to work for me. The code is getting dirtier and dirtier here, but I swear that I'll do something about it (see those two new XXX). Honest. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/block/ub.c b/drivers/block/ub.c index c3600cb..f04d864 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -14,7 +14,6 @@ * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries * -- verify the 13 conditions and do bulk resets * -- kill last_pipe and simply do two-state clearing on both pipes - * -- verify protocol (bulk) from USB descriptors (maybe...) * -- highmem * -- move top_sense and work_bcs into separate allocations (if they survive) * for cache purists and esoteric architectures. @@ -420,11 +419,13 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int stalled_pipe); static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); -static void ub_reset_enter(struct ub_dev *sc); +static void ub_reset_enter(struct ub_dev *sc, int try); static void ub_reset_task(void *arg); static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, struct ub_capacity *ret); +static int ub_sync_reset(struct ub_dev *sc); +static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe); static int ub_probe_lun(struct ub_dev *sc, int lnum); /* @@ -983,7 +984,7 @@ static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, if (atomic_read(&sc->poison)) return -ENXIO; - ub_reset_enter(sc); + ub_reset_enter(sc, urq->current_try); if (urq->current_try >= 3) return -EIO; @@ -1019,8 +1020,6 @@ static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, * No exceptions. * * Host is assumed locked. - * - * XXX We only support Bulk for the moment. */ static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { @@ -1703,16 +1702,18 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) /* * Reset management + * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing. + * XXX Make usb_sync_reset asynchronous. */ -static void ub_reset_enter(struct ub_dev *sc) +static void ub_reset_enter(struct ub_dev *sc, int try) { if (sc->reset) { /* This happens often on multi-LUN devices. */ return; } - sc->reset = 1; + sc->reset = try + 1; #if 0 /* Not needed because the disconnect waits for us. */ unsigned long flags; @@ -1750,6 +1751,11 @@ static void ub_reset_task(void *arg) if (atomic_read(&sc->poison)) { printk(KERN_NOTICE "%s: Not resetting disconnected device\n", sc->name); /* P3 This floods. Remove soon. XXX */ + } else if ((sc->reset & 1) == 0) { + ub_sync_reset(sc); + msleep(700); /* usb-storage sleeps 6s (!) */ + ub_probe_clear_stall(sc, sc->recv_bulk_pipe); + ub_probe_clear_stall(sc, sc->send_bulk_pipe); } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) { printk(KERN_NOTICE "%s: Not resetting multi-interface device\n", sc->name); /* P3 This floods. Remove soon. XXX */ @@ -2141,6 +2147,52 @@ static void ub_probe_timeout(unsigned long arg) } /* + * Reset with a Bulk reset. + */ +static int ub_sync_reset(struct ub_dev *sc) +{ + int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber; + struct usb_ctrlrequest *cr; + struct completion compl; + struct timer_list timer; + int rc; + + init_completion(&compl); + + cr = &sc->work_cr; + cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE; + cr->bRequest = US_BULK_RESET_REQUEST; + cr->wValue = cpu_to_le16(0); + cr->wIndex = cpu_to_le16(ifnum); + cr->wLength = cpu_to_le16(0); + + usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe, + (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl); + sc->work_urb.actual_length = 0; + sc->work_urb.error_count = 0; + sc->work_urb.status = 0; + + if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) { + printk(KERN_WARNING + "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc); + return rc; + } + + init_timer(&timer); + timer.function = ub_probe_timeout; + timer.data = (unsigned long) &compl; + timer.expires = jiffies + UB_CTRL_TIMEOUT; + add_timer(&timer); + + wait_for_completion(&compl); + + del_timer_sync(&timer); + usb_kill_urb(&sc->work_urb); + + return sc->work_urb.status; +} + +/* * Get number of LUNs by the way of Bulk GetMaxLUN command. */ static int ub_sync_getmaxlun(struct ub_dev *sc)