From: Roger Quadros <rogerq@kernel.org>
Date: Thu, 30 Mar 2023 08:49:53 +0000 (+0300)
Subject: arm64: dts: ti: k3-am625: Enable Type-C port for USB0
X-Git-Tag: v6.6.7~2515^2~14^2~120
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2c213d19515caf880e6c8266fbeda4145894c10e;p=platform%2Fkernel%2Flinux-starfive.git

arm64: dts: ti: k3-am625: Enable Type-C port for USB0

USB0 is a Type-C port with dual data role and power sink.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230330084954.49763-3-rogerq@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 2a1adda..729f95e 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -161,7 +161,7 @@
 				   "UART1_FET_BUF_EN", "WL_LT_EN",
 				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
 				   "CSI_GPIO2", "PRU_3V3_EN",
-				   "HDMI_INTn", "TEST_GPIO2",
+				   "HDMI_INTn", "PD_I2C_IRQ",
 				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "TSINT#", "IO_EXP_TEST_LED";
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index a61e864..4345b9f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -241,6 +241,30 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+
+	typec_pd0: tps6598x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &main_i2c1 {
@@ -320,7 +344,16 @@
 };
 
 &usb0 {
-	dr_mode = "peripheral";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-role-switch;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+		    remote-endpoint = <&usb_con_hs>;
+	       };
+	};
 };
 
 &usb1 {