From: Todd Fujinaka Date: Wed, 29 Apr 2015 22:23:28 +0000 (-0700) Subject: igb: Fix i354 88E1112 PHY on RCC boards using AutoMediaDetect X-Git-Tag: v5.15~15163^2~340^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2ba6c0797c8b5a9f945345ef2b9193bd47e5f18e;p=platform%2Fkernel%2Flinux-starfive.git igb: Fix i354 88E1112 PHY on RCC boards using AutoMediaDetect e1000_check_for_link_media_swap() checks PHY page 0 for copper and PHY page 1 for "other" (fiber) link. The switch back from page 1 to page 0 happened too soon, before e1000_check_for_link_82575() is executed, and link on fiber (other) was never detected. Check for link while still on the proper PHY page. Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index b0182dd..d192569 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -139,10 +139,6 @@ static s32 igb_check_for_link_media_swap(struct e1000_hw *hw) if (ret_val) return ret_val; - /* reset page to 0 */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); - if (ret_val) - return ret_val; if (data & E1000_M88E1112_STATUS_LINK) port = E1000_MEDIA_PORT_OTHER; @@ -151,8 +147,20 @@ static s32 igb_check_for_link_media_swap(struct e1000_hw *hw) if (port && (hw->dev_spec._82575.media_port != port)) { hw->dev_spec._82575.media_port = port; hw->dev_spec._82575.media_changed = true; + } + + if (port == E1000_MEDIA_PORT_COPPER) { + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + igb_check_for_link_82575(hw); } else { - ret_val = igb_check_for_link_82575(hw); + igb_check_for_link_82575(hw); + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; } return 0;