From: Tao Ren Date: Mon, 21 Oct 2019 19:48:17 +0000 (-0700) Subject: ARM: dts: aspeed: Common dtsi for Facebook AST2500 Network BMCs X-Git-Tag: v5.15~4703^2~7^2~12 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2b7ca63ccdec8795e6d308a60469b85b6abde96e;p=platform%2Fkernel%2Flinux-starfive.git ARM: dts: aspeed: Common dtsi for Facebook AST2500 Network BMCs This common descirption is included by all Facebook AST2500 Network BMC platforms to minimize duplicated device entries across Facebook Network BMC device trees. Signed-off-by: Tao Ren Signed-off-by: Joel Stanley --- diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi new file mode 100644 index 0000000..7a395ba --- /dev/null +++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2019 Facebook Inc. + +#include "aspeed-g5.dtsi" + +/ { + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&wdt2 { + status = "disabled"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&fmc { + status = "okay"; + + fmc_flash0: flash@0 { + status = "okay"; + m25p,fast-read; + label = "spi0.0"; + +#include "facebook-bmc-flash-layout.dtsi" + }; + + fmc_flash1: flash@1 { + status = "okay"; + m25p,fast-read; + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; + }; +}; + +&mac1 { + status = "okay"; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&rtc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&sdmmc { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_default>; +};