From: Simon Glass Date: Mon, 6 Jul 2015 22:47:53 +0000 (-0600) Subject: dm: usb: Add driver-model support to ehci-pci X-Git-Tag: v2015.10-rc1~85 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2b53b078d786a3e0485dd9a85949d49501137a23;p=platform%2Fkernel%2Fu-boot.git dm: usb: Add driver-model support to ehci-pci Support driver model in this driver. This uses the normal USB driver search mechanism. Any EHCI controllers will be set up as they are found during usb_init(). Signed-off-by: Simon Glass Reviewed-by: Marek Vasut --- diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 3d333bd..0cb9fcc 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -6,12 +6,45 @@ */ #include +#include #include #include #include #include "ehci.h" +/* Information about a USB port */ +struct ehci_pci_priv { + struct ehci_ctrl ehci; +}; + +static void ehci_pci_common_init(pci_dev_t pdev, struct ehci_hccr **ret_hccr, + struct ehci_hcor **ret_hcor) +{ + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + uint32_t cmd; + + hccr = (struct ehci_hccr *)pci_map_bar(pdev, + PCI_BASE_ADDRESS_0, PCI_REGION_MEM); + hcor = (struct ehci_hcor *)((uint32_t) hccr + + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", + (uint32_t)hccr, (uint32_t)hcor, + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + *ret_hccr = hccr; + *ret_hcor = hcor; + + /* enable busmaster */ + pci_read_config_dword(pdev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER; + pci_write_config_dword(pdev, PCI_COMMAND, cmd); +} + +#ifndef CONFIG_DM_USB + #ifdef CONFIG_PCI_EHCI_DEVICE static struct pci_device_id ehci_pci_ids[] = { /* Please add supported PCI EHCI controller ids here */ @@ -20,7 +53,6 @@ static struct pci_device_id ehci_pci_ids[] = { {0x12D8, 0x400F}, /* Pericom */ {0, 0} }; -#else #endif /* @@ -31,9 +63,6 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor) { pci_dev_t pdev; - uint32_t cmd; - struct ehci_hccr *hccr; - struct ehci_hcor *hcor; #ifdef CONFIG_PCI_EHCI_DEVICE pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE); @@ -44,23 +73,8 @@ int ehci_hcd_init(int index, enum usb_init_type init, printf("EHCI host controller not found\n"); return -1; } + ehci_pci_common_init(pdev, ret_hccr, ret_hcor); - hccr = (struct ehci_hccr *)pci_map_bar(pdev, - PCI_BASE_ADDRESS_0, PCI_REGION_MEM); - hcor = (struct ehci_hcor *)((uint32_t) hccr + - HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - - debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", - (uint32_t)hccr, (uint32_t)hcor, - (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - - *ret_hccr = hccr; - *ret_hcor = hcor; - - /* enable busmaster */ - pci_read_config_dword(pdev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER; - pci_write_config_dword(pdev, PCI_COMMAND, cmd); return 0; } @@ -72,3 +86,46 @@ int ehci_hcd_stop(int index) { return 0; } +#endif /* nCONFIG_DM_USB */ + +#ifdef CONFIG_DM_USB +static int ehci_pci_probe(struct udevice *dev) +{ + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + + ehci_pci_common_init(pci_get_bdf(dev), &hccr, &hcor); + + return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); +} + +static int ehci_pci_remove(struct udevice *dev) +{ + int ret; + + ret = ehci_deregister(dev); + if (ret) + return ret; + + return 0; +} + +U_BOOT_DRIVER(ehci_pci) = { + .name = "ehci_pci", + .id = UCLASS_USB, + .probe = ehci_pci_probe, + .remove = ehci_pci_remove, + .ops = &ehci_usb_ops, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct ehci_pci_priv), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; + +static struct pci_device_id ehci_pci_supported[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0) }, + {}, +}; + +U_BOOT_PCI_DEVICE(ehci_pci, ehci_pci_supported); + +#endif /* CONFIG_DM_USB */