From: Adam Ford Date: Thu, 5 Oct 2023 00:04:01 +0000 (-0500) Subject: ARM: dts: am3517-evm: Fix LED3/4 pinmux X-Git-Tag: v6.6.17~3332 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2b3583c0bc15e527ae91981f9e57e10a1ce0a4f2;p=platform%2Fkernel%2Flinux-rpi.git ARM: dts: am3517-evm: Fix LED3/4 pinmux [ Upstream commit 2ab6b437c65233f06bdd2988fd5913baeca5f159 ] The pinmux for LED3 and LED4 are incorrectly attached to the omap3_pmx_core when they should be connected to the omap3_pmx_wkup pin mux. This was likely masked by the fact that the bootloader used to do all the pinmuxing. Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton") Signed-off-by: Adam Ford Message-ID: <20231005000402.50879-1-aford173@gmail.com> Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- diff --git a/arch/arm/boot/dts/ti/omap/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts index af9df15..866f68c 100644 --- a/arch/arm/boot/dts/ti/omap/am3517-evm.dts +++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts @@ -271,13 +271,6 @@ >; }; - leds_pins: leds-pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ - OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ - >; - }; - mmc1_pins: mmc1-pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ @@ -355,3 +348,12 @@ >; }; }; + +&omap3_pmx_wkup { + leds_pins: leds-pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ + OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ + >; + }; +};