From: Seung-Woo Kim <sw0312.kim@samsung.com>
Date: Fri, 19 Oct 2018 01:46:53 +0000 (+0900)
Subject: ARM: dts: bcm2710-rpi-3-b-plus: Enable dt nodes for audio, i2c1, spi0
X-Git-Tag: submit/tizen/20220208.074352~269
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2ae4017e8ccb710c8e979bef92f02831ad5d09c8;p=platform%2Fkernel%2Flinux-rpi.git

ARM: dts: bcm2710-rpi-3-b-plus: Enable dt nodes for audio, i2c1, spi0

In Tizen dt-overlay is not used, so some device nodes should be
enabled to use. Enable dt nodes for audio, i2c1 and spi0 like
rpi3 b model.

Change-Id: I07504d1ece3c0aeb797ddfc372c956226d316814
Reference: 7fbb122e5232 ("ARM: dts: bcm2710-rpi-3-b: enable spi0 device node")
Reference: 34a29d8d477a ("ARM64: dts: bcm2710-rpi-3-b: enable i2c1")
Reference: 2ad26af6908c ("ARM: dts: bcm2710-rpi-3-b : Change audio node status as "okay"")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
---

diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
index 8f9f750..e319046 100644
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
@@ -121,6 +121,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
 	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+	status = "okay";
 
 	spidev0: spidev@0{
 		compatible = "spidev";
@@ -147,6 +148,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <100000>;
+	status = "okay";
 };
 
 &i2c2 {
@@ -212,6 +214,7 @@
 &audio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&audio_pins>;
+	status = "okay";
 };
 
 &eth_phy {