From: Scott Feldman <sfeldma@gmail.com>
Date: Mon, 1 Jun 2015 18:39:06 +0000 (-0700)
Subject: rocker: remove support for legacy VLAN ndo ops
X-Git-Tag: v4.14-rc1~5205^2~158^2
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2aa2ed0864b3cf96479a401c449dd4a3eea15ce8;p=platform%2Fkernel%2Flinux-rpi.git

rocker: remove support for legacy VLAN ndo ops

Remove support for legacy ndo ops
.ndo_vlan_rx_add_vid/.ndo_vlan_rx_kill_vid.  Rocker will use
bridge_setlink/dellink exclusively for VLAN add/del operations.

The legacy ops are needed if using 8021q driver module to setup VLANs on
the port.  But an alternative exists in using bridge_setlink/delink to
setup VLANs, which doesn't depend on 8021q module.  So rocker will switch
to the newer setlink/dellink ops.  VLANs can added/delete from the port,
regardless if port is bridged or not, using the bridge commands:

	bridge vlan [add|del] vid VID dev DEV self

(Yes, I agree it's confusing to use the "bridge" command to set a VLAN on a
non-bridged port).

Using setlink/dellink over legacy ops let's us handle the stacked driver
case automatically.  It's built-in.  setlink also pass additional flags
(PVID, egress untagged) that aren't available with the legacy ops.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/rocker/rocker.c b/drivers/net/ethernet/rocker/rocker.c
index 357f55d..819289e 100644
--- a/drivers/net/ethernet/rocker/rocker.c
+++ b/drivers/net/ethernet/rocker/rocker.c
@@ -4164,35 +4164,6 @@ static int rocker_port_set_mac_address(struct net_device *dev, void *p)
 	return 0;
 }
 
-static int rocker_port_vlan_rx_add_vid(struct net_device *dev,
-				       __be16 proto, u16 vid)
-{
-	struct rocker_port *rocker_port = netdev_priv(dev);
-	int err;
-
-	err = rocker_port_vlan(rocker_port, SWITCHDEV_TRANS_NONE, 0, vid);
-	if (err)
-		return err;
-
-	return rocker_port_router_mac(rocker_port, SWITCHDEV_TRANS_NONE,
-				      0, htons(vid));
-}
-
-static int rocker_port_vlan_rx_kill_vid(struct net_device *dev,
-					__be16 proto, u16 vid)
-{
-	struct rocker_port *rocker_port = netdev_priv(dev);
-	int err;
-
-	err = rocker_port_router_mac(rocker_port, SWITCHDEV_TRANS_NONE,
-				     ROCKER_OP_FLAG_REMOVE, htons(vid));
-	if (err)
-		return err;
-
-	return rocker_port_vlan(rocker_port, SWITCHDEV_TRANS_NONE,
-				ROCKER_OP_FLAG_REMOVE, vid);
-}
-
 static int rocker_port_get_phys_port_name(struct net_device *dev,
 					  char *buf, size_t len)
 {
@@ -4213,8 +4184,6 @@ static const struct net_device_ops rocker_port_netdev_ops = {
 	.ndo_stop			= rocker_port_stop,
 	.ndo_start_xmit			= rocker_port_xmit,
 	.ndo_set_mac_address		= rocker_port_set_mac_address,
-	.ndo_vlan_rx_add_vid		= rocker_port_vlan_rx_add_vid,
-	.ndo_vlan_rx_kill_vid		= rocker_port_vlan_rx_kill_vid,
 	.ndo_bridge_getlink		= switchdev_port_bridge_getlink,
 	.ndo_bridge_setlink		= switchdev_port_bridge_setlink,
 	.ndo_bridge_dellink		= switchdev_port_bridge_dellink,
@@ -4883,8 +4852,7 @@ static int rocker_probe_port(struct rocker *rocker, unsigned int port_number)
 		       NAPI_POLL_WEIGHT);
 	rocker_carrier_init(rocker_port);
 
-	dev->features |= NETIF_F_NETNS_LOCAL |
-			 NETIF_F_HW_VLAN_CTAG_FILTER;
+	dev->features |= NETIF_F_NETNS_LOCAL;
 
 	err = register_netdev(dev);
 	if (err) {