From: Samu Onkalo Date: Fri, 22 Oct 2010 11:57:23 +0000 (-0400) Subject: hwmon: lis3: pm_runtime support X-Git-Tag: v2.6.37-rc1~118^2~11 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2a346996626ecbb4269c239e9ff7372a182907e9;p=platform%2Fkernel%2Flinux-exynos.git hwmon: lis3: pm_runtime support Add pm_runtime support to lis3 core driver. Add pm_runtime support to lis3 i2c driver. spi and hp_accel drivers are not yet supported. Old always on functionality remains for those. For sysfs there is 5 second delay before turning off the chip to avoid long ramp up delay. Signed-off-by: Samu Onkalo Acked-by: Jonathan Cameron Acked-by: Eric Piel Signed-off-by: Guenter Roeck --- diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 25f385010953..383a84938a98 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include "lis3lv02d.h" @@ -43,6 +44,9 @@ #define MDPS_POLL_INTERVAL 50 #define MDPS_POLL_MIN 0 #define MDPS_POLL_MAX 2000 + +#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */ + /* * The sensor can also generate interrupts (DRDY) but it's pretty pointless * because they are generated even if the data do not change. So it's better @@ -296,6 +300,18 @@ static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev) mutex_unlock(&lis3_dev.mutex); } +static void lis3lv02d_joystick_open(struct input_polled_dev *pidev) +{ + if (lis3_dev.pm_dev) + pm_runtime_get_sync(lis3_dev.pm_dev); +} + +static void lis3lv02d_joystick_close(struct input_polled_dev *pidev) +{ + if (lis3_dev.pm_dev) + pm_runtime_put(lis3_dev.pm_dev); +} + static irqreturn_t lis302dl_interrupt(int irq, void *dummy) { if (!test_bit(0, &lis3_dev.misc_opened)) @@ -390,6 +406,9 @@ static int lis3lv02d_misc_open(struct inode *inode, struct file *file) if (test_and_set_bit(0, &lis3_dev.misc_opened)) return -EBUSY; /* already open */ + if (lis3_dev.pm_dev) + pm_runtime_get_sync(lis3_dev.pm_dev); + atomic_set(&lis3_dev.count, 0); return 0; } @@ -398,6 +417,8 @@ static int lis3lv02d_misc_release(struct inode *inode, struct file *file) { fasync_helper(-1, file, 0, &lis3_dev.async_queue); clear_bit(0, &lis3_dev.misc_opened); /* release the device */ + if (lis3_dev.pm_dev) + pm_runtime_put(lis3_dev.pm_dev); return 0; } @@ -494,6 +515,8 @@ int lis3lv02d_joystick_enable(void) return -ENOMEM; lis3_dev.idev->poll = lis3lv02d_joystick_poll; + lis3_dev.idev->open = lis3lv02d_joystick_open; + lis3_dev.idev->close = lis3lv02d_joystick_close; lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL; lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN; lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX; @@ -546,12 +569,30 @@ void lis3lv02d_joystick_disable(void) EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable); /* Sysfs stuff */ +static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3) +{ + /* + * SYSFS functions are fast visitors so put-call + * immediately after the get-call. However, keep + * chip running for a while and schedule delayed + * suspend. This way periodic sysfs calls doesn't + * suffer from relatively long power up time. + */ + + if (lis3->pm_dev) { + pm_runtime_get_sync(lis3->pm_dev); + pm_runtime_put_noidle(lis3->pm_dev); + pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY); + } +} + static ssize_t lis3lv02d_selftest_show(struct device *dev, struct device_attribute *attr, char *buf) { int result; s16 values[3]; + lis3lv02d_sysfs_poweron(&lis3_dev); result = lis3lv02d_selftest(&lis3_dev, values); return sprintf(buf, "%s %d %d %d\n", result == 0 ? "OK" : "FAIL", values[0], values[1], values[2]); @@ -562,6 +603,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev, { int x, y, z; + lis3lv02d_sysfs_poweron(&lis3_dev); mutex_lock(&lis3_dev.mutex); lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); mutex_unlock(&lis3_dev.mutex); @@ -571,6 +613,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev, static ssize_t lis3lv02d_rate_show(struct device *dev, struct device_attribute *attr, char *buf) { + lis3lv02d_sysfs_poweron(&lis3_dev); return sprintf(buf, "%d\n", lis3lv02d_get_odr()); } @@ -583,6 +626,7 @@ static ssize_t lis3lv02d_rate_set(struct device *dev, if (strict_strtoul(buf, 0, &rate)) return -EINVAL; + lis3lv02d_sysfs_poweron(&lis3_dev); if (lis3lv02d_set_odr(rate)) return -EINVAL; @@ -619,6 +663,17 @@ int lis3lv02d_remove_fs(struct lis3lv02d *lis3) { sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); platform_device_unregister(lis3->pdev); + if (lis3->pm_dev) { + /* Barrier after the sysfs remove */ + pm_runtime_barrier(lis3->pm_dev); + + /* SYSFS may have left chip running. Turn off if necessary */ + if (!pm_runtime_suspended(lis3->pm_dev)) + lis3lv02d_poweroff(&lis3_dev); + + pm_runtime_disable(lis3->pm_dev); + pm_runtime_set_suspended(lis3->pm_dev); + } return 0; } EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); @@ -728,6 +783,11 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) lis3lv02d_add_fs(dev); lis3lv02d_poweron(dev); + if (dev->pm_dev) { + pm_runtime_set_active(dev->pm_dev); + pm_runtime_enable(dev->pm_dev); + } + if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index eb5db584eb0e..633cf1debc52 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -232,6 +232,7 @@ union axis_conversion { struct lis3lv02d { void *bus_priv; /* used by the bus layer only */ + struct device *pm_dev; /* for pm_runtime purposes */ int (*init) (struct lis3lv02d *lis3); int (*write) (struct lis3lv02d *lis3, int reg, u8 val); int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret); diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c index c6f3f3411276..d52095603e03 100644 --- a/drivers/hwmon/lis3lv02d_i2c.c +++ b/drivers/hwmon/lis3lv02d_i2c.c @@ -29,6 +29,7 @@ #include #include #include +#include #include "lis3lv02d.h" #define DRV_NAME "lis3lv02d_i2c" @@ -94,6 +95,7 @@ static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, lis3_dev.write = lis3_i2c_write; lis3_dev.irq = client->irq; lis3_dev.ac = lis3lv02d_axis_map; + lis3_dev.pm_dev = &client->dev; i2c_set_clientdata(client, &lis3_dev); ret = lis3lv02d_init_device(&lis3_dev); @@ -103,21 +105,20 @@ fail: static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) { - struct lis3lv02d *lis3 = i2c_get_clientdata(client); struct lis3lv02d_platform_data *pdata = client->dev.platform_data; if (pdata && pdata->release_resources) pdata->release_resources(); lis3lv02d_joystick_disable(); - lis3lv02d_poweroff(lis3); return lis3lv02d_remove_fs(&lis3_dev); } #ifdef CONFIG_PM -static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) +static int lis3lv02d_i2c_suspend(struct device *dev) { + struct i2c_client *client = container_of(dev, struct i2c_client, dev); struct lis3lv02d *lis3 = i2c_get_clientdata(client); if (!lis3->pdata || !lis3->pdata->wakeup_flags) @@ -125,18 +126,21 @@ static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) return 0; } -static int lis3lv02d_i2c_resume(struct i2c_client *client) +static int lis3lv02d_i2c_resume(struct device *dev) { + struct i2c_client *client = container_of(dev, struct i2c_client, dev); struct lis3lv02d *lis3 = i2c_get_clientdata(client); - if (!lis3->pdata || !lis3->pdata->wakeup_flags) + /* + * pm_runtime documentation says that devices should always + * be powered on at resume. Pm_runtime turns them off after system + * wide resume is complete. + */ + if (!lis3->pdata || !lis3->pdata->wakeup_flags || + pm_runtime_suspended(dev)) lis3lv02d_poweron(lis3); - return 0; -} -static void lis3lv02d_i2c_shutdown(struct i2c_client *client) -{ - lis3lv02d_i2c_suspend(client, PMSG_SUSPEND); + return 0; } #else #define lis3lv02d_i2c_suspend NULL @@ -144,6 +148,24 @@ static void lis3lv02d_i2c_shutdown(struct i2c_client *client) #define lis3lv02d_i2c_shutdown NULL #endif +static int lis3_i2c_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3_i2c_runtime_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + lis3lv02d_poweron(lis3); + return 0; +} + static const struct i2c_device_id lis3lv02d_id[] = { {"lis3lv02d", 0 }, {} @@ -151,14 +173,20 @@ static const struct i2c_device_id lis3lv02d_id[] = { MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); +static const struct dev_pm_ops lis3_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend, + lis3lv02d_i2c_resume) + SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend, + lis3_i2c_runtime_resume, + NULL) +}; + static struct i2c_driver lis3lv02d_i2c_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, + .pm = &lis3_pm_ops, }, - .suspend = lis3lv02d_i2c_suspend, - .shutdown = lis3lv02d_i2c_shutdown, - .resume = lis3lv02d_i2c_resume, .probe = lis3lv02d_i2c_probe, .remove = __devexit_p(lis3lv02d_i2c_remove), .id_table = lis3lv02d_id,