From: Fan Ning <fanning4@hisilicon.com>
Date: Tue, 6 Jun 2017 08:53:31 +0000 (+0800)
Subject: TODO: arm64: dts: hi3660: add usb nodes for hikey960
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2855471ba7f77c47646d4df2cbc5a57ebdd1c1b7;p=platform%2Fkernel%2Flinux-exynos.git

TODO: arm64: dts: hi3660: add usb nodes for hikey960

TODO: need to separate between hi3660.dtsi and hi3660-hikey960.dts

Signed-off-by: Fan Ning <fanning4@hisilicon.com>
---

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index af47b4402df4..dd4a0314cbf1 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -349,6 +349,12 @@
 			#clock-cells = <1>;
 		};
 
+		pmctrl: pmctrl@fff31000 {
+			compatible = "hisilicon,hi3660-pmctrl", "syscon";
+			reg = <0x0 0xfff31000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pmuctrl: crg_ctrl@fff34000 {
 			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
 			reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -425,6 +431,95 @@
 			resets = <&iomcu_rst 0x20 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "ok";
+
+			rt1711@4e {
+				compatible = "richtek,rt1711";
+				reg = <0x4e>;
+				status = "ok";
+				rt1711,irq_pin = <&gpio27 3 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&usb_cfg_func>;
+				/* 0: dfp/ufp, 1: dfp, 2: ufp */
+				rt-dual,supported_modes = <0>;
+				/* tcpc_device's name */
+				rt-tcpc,name = "type_c_port0";
+				/* 0: SNK Only, 1: SRC Only, 2: DRP, 3: Try.SRC, 4: Try.SNK */
+				rt-tcpc,role_def = <2>;
+				/* 0: Default, 1: 1.5, 2: 3.0 */
+				rt-tcpc,rp_level = <0>;
+				/* the number of notifier supply */
+				rt-tcpc,notifier_supply_num = <0>;
+				pd-data {
+					pd,source-pdo-size = <1>;
+					/*<0x019014>;*/
+					pd,source-pdo-data = <0x00019064>;
+
+					pd,sink-pdo-size = <2>;
+					/* 0x0002d0c8 : 9V, 2A */
+					pd,sink-pdo-data = <0x000190c8 0x0002d0c8> ;
+
+					pd,id-vdo-size = <3>;
+					pd,id-vdo-data = <0xd00029cf 0x0 0x00010000>;
+				};
+				dpm_caps {
+					local_dr_power;
+					local_dr_data;
+					// local_ext_power;
+					local_usb_comm;
+					// local_usb_suspend;
+					// local_high_cap;
+					// local_give_back;
+					// local_no_suspend;
+					local_vconn_supply;
+
+					// attemp_enter_dp_mode;
+					attemp_discover_cable;
+					attemp_discover_id;
+
+					/* 0: disable, 1: prefer_snk, 2: prefer_src */
+					pr_check = <0>;
+					// pr_reject_as_source;
+					// pr_reject_as_sink;
+					pr_check_gp_source;
+					// pr_check_gp_sink;
+
+					/* 0: disable, 1: prefer_ufp, 2: prefer_dfp */
+					dr_check = <0>;
+					// dr_reject_as_dfp;
+					// dr_reject_as_ufp;
+
+					snk_prefer_low_voltage;
+					snk_ignore_mismatch_current;
+				};
+			};
+		};
+
+		pd_dpm {
+			compatible = "hisilicon,pd_dpm";
+			tcp_name = "type_c_port0";
+			status = "ok";
+		};
+
+		hubv1: gpio_hubv1 {
+			compatible = "hisilicon,gpio_hubv1";
+			typc_vbus_int_gpio,typec-gpios = <&gpio25 2 0>;
+			typc_vbus_enable_val = <0>;
+			hub_vdd12_en_gpio = <&gpio9 1 0>;
+			hub_vdd33_en_gpio = <&gpio9 2 0>;
+			status = "disabled";
+		};
+
+		hubv2: gpio_hubv2 {
+			compatible = "hisilicon,gpio_hubv2";
+			typc_vbus_int_gpio,typec-gpios = <&gpio25 2 0>;
+			typc_vbus_enable_val = <1>;
+			otg_gpio = <&gpio25 6 0>;
+			hub_vdd12_en_gpio = <&gpio2 1 0>;
+			hub_vdd33_en_gpio = <&gpio5 6 0>;
+			hub_reset_en_gpio = <&gpio4 4 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbhub5734_pmx_func>;
 			status = "disabled";
 		};
 
@@ -1146,5 +1241,37 @@
 				};
 			};
 		};
+
+		hub5734_gpio:hub5734_gpio {
+			compatible = "hub5734_gpio";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbhub5734_pmx_func>;
+		};
+
+		hisi_usb@ff200000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "hisilicon,hi3660-dwc3";
+			reg = <0x0 0xff200000 0x0 0x1000 0x0 0xff100000 0x0 0x100000>;
+			ranges;
+			bc_again_flag = <1>;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+			eye_diagram_param = <0x1c466e3>;
+			eye_diagram_host_param = <0x1c466e3>;
+			usb3_phy_cr_param = <0xb80>;
+			usb3_phy_host_cr_param = <0x980>;
+			usb3_phy_tx_vboost_lvl = <0x5>;
+
+			dwc3@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+				interrupts = <0 159 4>, <0 161 4>;
+				dr_mode = "otg";
+				maximum-speed = "super-speed";
+			};
+		};
 	};
 };