From: Sarah Sharp Date: Fri, 30 Jul 2010 05:12:43 +0000 (-0700) Subject: USB: xhci: Remove unnecessary reads of IRQ_PENDING register. X-Git-Tag: upstream/snapshot3+hdmi~13509^2~11 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=27e0dd4d7ccc3e8e2a79600c3608031022a2298c;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git USB: xhci: Remove unnecessary reads of IRQ_PENDING register. Remove a duplicate register read of the interrupt pending register from xhci_irq(). Also, remove waiting on the posted write of that register. The host will see it eventually. It will probably read the register itself before deciding whether to interrupt the system again, forcing the posted write to complete. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f9c08d2..eb4b102 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2039,25 +2039,25 @@ void xhci_handle_event(struct xhci_hcd *xhci) irqreturn_t xhci_irq(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - u32 temp, temp2; + u32 status, irq_pending; union xhci_trb *trb; u64 temp_64; spin_lock(&xhci->lock); trb = xhci->event_ring->dequeue; /* Check if the xHC generated the interrupt, or the irq is shared */ - temp = xhci_readl(xhci, &xhci->op_regs->status); - temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending); - if (temp == 0xffffffff && temp2 == 0xffffffff) + status = xhci_readl(xhci, &xhci->op_regs->status); + irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); + if (status == 0xffffffff && irq_pending == 0xffffffff) goto hw_died; - if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) { + if (!(status & STS_EINT) && !ER_IRQ_PENDING(irq_pending)) { spin_unlock(&xhci->lock); xhci_warn(xhci, "Spurious interrupt.\n"); return IRQ_NONE; } - xhci_dbg(xhci, "op reg status = %08x\n", temp); - xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2); + xhci_dbg(xhci, "op reg status = %08x\n", status); + xhci_dbg(xhci, "ir set irq_pending = %08x\n", irq_pending); xhci_dbg(xhci, "Event ring dequeue ptr:\n"); xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", (unsigned long long) @@ -2067,7 +2067,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) (unsigned int) trb->link.intr_target, (unsigned int) trb->link.control); - if (temp & STS_FATAL) { + if (status & STS_FATAL) { xhci_warn(xhci, "WARNING: Host System Error\n"); xhci_halt(xhci); hw_died: @@ -2081,15 +2081,14 @@ hw_died: * so we can receive interrupts from other MSI-X interrupters. * Write 1 to clear the interrupt status. */ - temp |= STS_EINT; - xhci_writel(xhci, temp, &xhci->op_regs->status); + status |= STS_EINT; + xhci_writel(xhci, status, &xhci->op_regs->status); /* FIXME when MSI-X is supported and there are multiple vectors */ /* Clear the MSI-X event interrupt status */ /* Acknowledge the interrupt */ - temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); - temp |= 0x3; - xhci_writel(xhci, temp, &xhci->ir_set->irq_pending); + irq_pending |= 0x3; + xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); if (xhci->xhc_state & XHCI_STATE_DYING) xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " @@ -2103,8 +2102,6 @@ hw_died: /* Clear the event handler busy flag (RW1C); event ring is empty. */ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); - /* Flush posted writes -- FIXME is this necessary? */ - xhci_readl(xhci, &xhci->ir_set->irq_pending); spin_unlock(&xhci->lock); return IRQ_HANDLED;