From: Linus Walleij Date: Fri, 15 Nov 2013 08:20:28 +0000 (+0100) Subject: ARM: ux500: move SKE pin config to device tree X-Git-Tag: v3.14-rc1~36^2~6^2~29 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=279571358df1e3f9788f1095d73b777fdb68c7e0;p=platform%2Fkernel%2Flinux-stable.git ARM: ux500: move SKE pin config to device tree This moves the SKE keypad pin control table out of the board file and into the device tree. This was previously set to be active on all MOP500 and HREF boards but after reading the schematic this seems incorrect: the HREFv60 and later uses one of these for MC5 and no reference designs have the SKE connected to any hardware so just leave the pins alone in the power-on state. Signed-off-by: Linus Walleij --- diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi index 779829a..854a4a6 100644 --- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -631,6 +631,96 @@ }; }; }; + + ske { + /* SKE keys on position 2 in an 8x8 matrix */ + ske_kpa2_default_mode: ske_kpa2_default { + default_mux { + ste,function = "kp"; + ste,pins = "kp_a_2"; + }; + default_cfg1 { + ste,pins = + "GPIO153_B17", /* I7 */ + "GPIO154_C16", /* I6 */ + "GPIO155_C19", /* I5 */ + "GPIO156_C17", /* I4 */ + "GPIO161_D21", /* I3 */ + "GPIO162_D20", /* I2 */ + "GPIO163_C20", /* I1 */ + "GPIO164_B21"; /* I0 */ + ste,config = <&in_pd>; + }; + default_cfg2 { + ste,pins = + "GPIO157_A18", /* O7 */ + "GPIO158_C18", /* O6 */ + "GPIO159_B19", /* O5 */ + "GPIO160_B20", /* O4 */ + "GPIO165_C21", /* O3 */ + "GPIO166_A22", /* O2 */ + "GPIO167_B24", /* O1 */ + "GPIO168_C22"; /* O0 */ + ste,config = <&out_lo>; + }; + }; + ske_kpa2_sleep_mode: ske_kpa2_sleep { + sleep_cfg1 { + ste,pins = + "GPIO153_B17", /* I7 */ + "GPIO154_C16", /* I6 */ + "GPIO155_C19", /* I5 */ + "GPIO156_C17", /* I4 */ + "GPIO161_D21", /* I3 */ + "GPIO162_D20", /* I2 */ + "GPIO163_C20", /* I1 */ + "GPIO164_B21"; /* I0 */ + ste,config = <&slpm_in_pu_wkup_pdis_en>; + }; + sleep_cfg2 { + ste,pins = + "GPIO157_A18", /* O7 */ + "GPIO158_C18", /* O6 */ + "GPIO159_B19", /* O5 */ + "GPIO160_B20", /* O4 */ + "GPIO165_C21", /* O3 */ + "GPIO166_A22", /* O2 */ + "GPIO167_B24", /* O1 */ + "GPIO168_C22"; /* O0 */ + ste,config = <&slpm_out_lo_pdis>; + }; + }; + /* + * SKE keys on position 1 and "other C1" combi giving + * six rows of six keys. + */ + ske_kpaoc1_default_mode: ske_kpaoc1_default { + default_mux { + ste,function = "kp"; + ste,pins = "kp_a_1", "kp_oc1_1"; + }; + default_cfg1 { + ste,pins = + "GPIO91_B6", /* KP_O0 */ + "GPIO90_A3", /* KP_O1 */ + "GPIO87_B3", /* KP_O2 */ + "GPIO86_C6", /* KP_O3 */ + "GPIO96_D8", /* KP_O6 */ + "GPIO94_D7"; /* KP_O7 */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = + "GPIO93_B7", /* KP_I0 */ + "GPIO92_D6", /* KP_I1 */ + "GPIO89_E6", /* KP_I2 */ + "GPIO88_C4", /* KP_I3 */ + "GPIO97_D9", /* KP_I6 */ + "GPIO95_E8"; /* KP_I7 */ + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi index 456a25f..ee143b0 100644 --- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -91,6 +91,13 @@ ste,sleep-pull-disable = ; }; + slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en { + ste,sleep = ; + ste,sleep-input = ; + ste,sleep-wakeup = ; + ste,sleep-pull-disable = ; + }; + slpm_out_lo: slpm_out_lo { ste,sleep = ; ste,sleep-output = ; diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 4cc4cb1..07ddb89 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -323,42 +323,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = { /* Pin control settings */ static struct pinctrl_map __initdata mop500_family_pinmap[] = { - /* ske default state */ - DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), - DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ - /* ske sleep state */ - DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ - /* STM APE pins states */ DB8500_MUX_STATE("stmape_c_1", "stmape", "stm", "ape_mipi34"), @@ -561,41 +525,6 @@ static struct pinctrl_map __initdata mop500_pinmap[] = { * Runtime stuff: make it possible to mux in the SKE keypad * and bias the pins */ - /* ske default state */ - DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), - DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ - /* ske sleep state */ - DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ }; /* @@ -655,22 +584,6 @@ static struct pinctrl_map __initdata hrefv60_pinmap[] = { DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */ DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */ DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */ - /* - * SKE keyboard partly on alt A and partly on "Other alt C1" - * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three - * rows of 6 keys, then pull up force sensing interrup and - * drive reset and force sensing WU low. - */ - DB8500_MUX_HOG("kp_a_1", "kp"), - DB8500_MUX_HOG("kp_oc1_1", "kp"), - DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */ - DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */ - DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */ - DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */ - DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */ - DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */ - DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */ - DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */ DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */ DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */ DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */