From: Jagan Teki <jteki@openedev.com>
Date: Mon, 7 Sep 2015 20:09:44 +0000 (+0530)
Subject: spi: zynq_qspi: Fix to configure CPOL, CPHA mask
X-Git-Tag: v2016.01-rc1~155^2~31
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2775e91835638031d1134176d536ac2946fc5e6b;p=platform%2Fkernel%2Fu-boot.git

spi: zynq_qspi: Fix to configure CPOL, CPHA mask

priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.

This patch also replaces formatting string to use
speed instead of mode in .set_speed ops.

Signed-off-by: Jagan Teki <jteki@openedev.com>
---

diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c
index 0ce6127..8aa61d7 100644
--- a/drivers/spi/zynq_qspi.c
+++ b/drivers/spi/zynq_qspi.c
@@ -569,7 +569,8 @@ static int zynq_qspi_set_speed(struct udevice *bus, uint speed)
 	writel(confr, &regs->cr);
 	priv->freq = speed;
 
-	debug("zynq_spi_set_speed: regs=%p, mode=%d\n", priv->regs, priv->freq);
+	debug("zynq_spi_set_speed: regs=%p, speed=%d\n",
+	      priv->regs, priv->freq);
 
 	return 0;
 }
@@ -584,9 +585,9 @@ static int zynq_qspi_set_mode(struct udevice *bus, uint mode)
 	confr = readl(&regs->cr);
 	confr &= ~(ZYNQ_QSPI_CR_CPHA_MASK | ZYNQ_QSPI_CR_CPOL_MASK);
 
-	if (priv->mode & SPI_CPHA)
+	if (mode & SPI_CPHA)
 		confr |= ZYNQ_QSPI_CR_CPHA_MASK;
-	if (priv->mode & SPI_CPOL)
+	if (mode & SPI_CPOL)
 		confr |= ZYNQ_QSPI_CR_CPOL_MASK;
 
 	writel(confr, &regs->cr);