From: Dong Aisheng Date: Tue, 13 Jun 2017 02:55:52 +0000 (+0800) Subject: tty: serial: lpuart: add imx7ulp support X-Git-Tag: v4.14-rc1~622^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=24b1e5f0e83c2aced8096473d20c4cf6c1355f30;p=platform%2Fkernel%2Flinux-rpi.git tty: serial: lpuart: add imx7ulp support The lpuart of imx7ulp is basically the same as ls1021a. It's also 32 bit width register, but unlike ls1021a, it's little endian. Besides that, imx7ulp lpuart has a minor different register layout from ls1021a that it has four extra registers (verid, param, global, pincfg) located at the beginning of register map, which are currently not used by the driver and less to be used later. To ease the register difference handling, we add a reg_off member in lpuart_soc_data structure to represent if the normal lpuart32_{read|write} requires plus a offset to hide the issue. Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Stefan Agner Cc: Mingkai Hu Cc: Yangbo Lu Cc: Fugang Duan Signed-off-by: Dong Aisheng Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index ed0bf18..9486333 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -231,6 +231,9 @@ #define DEV_NAME "ttyLP" #define UART_NR 6 +/* IMX lpuart has four extra unused regs located at the beginning */ +#define IMX_REG_OFF 0x10 + struct lpuart_port { struct uart_port port; struct clk *clk; @@ -259,6 +262,7 @@ struct lpuart_port { struct lpuart_soc_data { char iotype; + u8 reg_off; }; static const struct lpuart_soc_data vf_data = { @@ -269,9 +273,15 @@ static const struct lpuart_soc_data ls_data = { .iotype = UPIO_MEM32BE, }; +static struct lpuart_soc_data imx_data = { + .iotype = UPIO_MEM32, + .reg_off = IMX_REG_OFF, +}; + static const struct of_device_id lpuart_dt_ids[] = { { .compatible = "fsl,vf610-lpuart", .data = &vf_data, }, { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, }, + { .compatible = "fsl,imx7ulp-lpuart", .data = &imx_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, lpuart_dt_ids); @@ -2019,6 +2029,7 @@ static int lpuart_probe(struct platform_device *pdev) if (IS_ERR(sport->port.membase)) return PTR_ERR(sport->port.membase); + sport->port.membase += sdata->reg_off; sport->port.mapbase = res->start; sport->port.dev = &pdev->dev; sport->port.type = PORT_LPUART;