From: Thomas Chou <thomas@wytron.com.tw>
Date: Thu, 1 Apr 2010 03:15:05 +0000 (+0800)
Subject: cfi_flash: reset timer in flash status check
X-Git-Tag: v2010.06-rc1~123^2
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=22d6c8faac4e9fa43232b0cf4da427ec14d72ad3;p=platform%2Fkernel%2Fu-boot.git

cfi_flash: reset timer in flash status check

This patch adds reset_timer() before the flash status check
waiting loop.

Since the timer is basically running asynchronous to the cfi
code, it is possible to call get_timer(0), then only a few
_SYSCLK_ cycles later an interrupt is generated. This causes
timeout even though much less time has elapsed. So the timer
period registers should be reset before get_timer(0) is
called.

There is similar usage in nand_base.c.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
---

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index d0240f5..3267c5d 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -544,6 +544,7 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
 #endif
 
 	/* Wait for command completion */
+	reset_timer();
 	start = get_timer (0);
 	while (flash_is_busy (info, sector)) {
 		if (get_timer (start) > tout) {
@@ -630,6 +631,7 @@ static int flash_status_poll(flash_info_t *info, void *src, void *dst,
 #endif
 
 	/* Wait for command completion */
+	reset_timer();
 	start = get_timer(0);
 	while (1) {
 		switch (info->portwidth) {