From: Arnd Bergmann Date: Fri, 30 Sep 2022 11:20:47 +0000 (+0200) Subject: usb: gadget: remove s3c24xx drivers X-Git-Tag: v6.6.7~3533^2~40 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=1fa774f706a9cfa68bc7dea9e369be3af86fac93;p=platform%2Fkernel%2Flinux-starfive.git usb: gadget: remove s3c24xx drivers The s3c24xx platform is gone, so both the udc and hsudc drivers can be removed as well. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Arnd Bergmann --- diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 0c5640b..511ab57 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -206,31 +206,6 @@ config USB_PXA27X dynamically linked module called "pxa27x_udc" and force all gadget drivers to also be dynamically linked. -config USB_S3C2410 - tristate "S3C2410 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2410 is an ARM-4 processor with an integrated - full speed USB 1.1 device controller. It has 4 configurable - endpoints, as well as endpoint zero (for control transfers). - - This driver has been tested on the S3C2410, S3C2412, and - S3C2440 processors. - -config USB_S3C2410_DEBUG - bool "S3C2410 udc debug messages" - depends on USB_S3C2410 - -config USB_S3C_HSUDC - tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC - integrated with dual speed USB 2.0 device controller. It has - 8 endpoints, as well as endpoint zero. - - This driver has been tested on S3C2416 and S3C2450 processors. - config USB_MV_UDC tristate "Marvell USB2.0 Device Controller" depends on HAS_DMA diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index 39daf36..239ea22 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o obj-$(CONFIG_USB_GOKU) += goku_udc.o obj-$(CONFIG_USB_OMAP) += omap_udc.o -obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o @@ -28,7 +27,6 @@ obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o obj-$(CONFIG_USB_RENESAS_USB3) += renesas_usb3.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o -obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_MV_UDC) += mv_udc.o diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c deleted file mode 100644 index 4b7eb77..0000000 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ /dev/null @@ -1,1319 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* linux/drivers/usb/gadget/s3c-hsudc.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S3C24XX USB 2.0 High-speed USB controller gadget driver - * - * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. - * Each endpoint can be configured as either in or out endpoint. Endpoints - * can be configured for Bulk or Interrupt transfer mode. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define S3C_HSUDC_REG(x) (x) - -/* Non-Indexed Registers */ -#define S3C_IR S3C_HSUDC_REG(0x00) /* Index Register */ -#define S3C_EIR S3C_HSUDC_REG(0x04) /* EP Intr Status */ -#define S3C_EIR_EP0 (1<<0) -#define S3C_EIER S3C_HSUDC_REG(0x08) /* EP Intr Enable */ -#define S3C_FAR S3C_HSUDC_REG(0x0c) /* Gadget Address */ -#define S3C_FNR S3C_HSUDC_REG(0x10) /* Frame Number */ -#define S3C_EDR S3C_HSUDC_REG(0x14) /* EP Direction */ -#define S3C_TR S3C_HSUDC_REG(0x18) /* Test Register */ -#define S3C_SSR S3C_HSUDC_REG(0x1c) /* System Status */ -#define S3C_SSR_DTZIEN_EN (0xff8f) -#define S3C_SSR_ERR (0xff80) -#define S3C_SSR_VBUSON (1 << 8) -#define S3C_SSR_HSP (1 << 4) -#define S3C_SSR_SDE (1 << 3) -#define S3C_SSR_RESUME (1 << 2) -#define S3C_SSR_SUSPEND (1 << 1) -#define S3C_SSR_RESET (1 << 0) -#define S3C_SCR S3C_HSUDC_REG(0x20) /* System Control */ -#define S3C_SCR_DTZIEN_EN (1 << 14) -#define S3C_SCR_RRD_EN (1 << 5) -#define S3C_SCR_SUS_EN (1 << 1) -#define S3C_SCR_RST_EN (1 << 0) -#define S3C_EP0SR S3C_HSUDC_REG(0x24) /* EP0 Status */ -#define S3C_EP0SR_EP0_LWO (1 << 6) -#define S3C_EP0SR_STALL (1 << 4) -#define S3C_EP0SR_TX_SUCCESS (1 << 1) -#define S3C_EP0SR_RX_SUCCESS (1 << 0) -#define S3C_EP0CR S3C_HSUDC_REG(0x28) /* EP0 Control */ -#define S3C_BR(_x) S3C_HSUDC_REG(0x60 + (_x * 4)) - -/* Indexed Registers */ -#define S3C_ESR S3C_HSUDC_REG(0x2c) /* EPn Status */ -#define S3C_ESR_FLUSH (1 << 6) -#define S3C_ESR_STALL (1 << 5) -#define S3C_ESR_LWO (1 << 4) -#define S3C_ESR_PSIF_ONE (1 << 2) -#define S3C_ESR_PSIF_TWO (2 << 2) -#define S3C_ESR_TX_SUCCESS (1 << 1) -#define S3C_ESR_RX_SUCCESS (1 << 0) -#define S3C_ECR S3C_HSUDC_REG(0x30) /* EPn Control */ -#define S3C_ECR_DUEN (1 << 7) -#define S3C_ECR_FLUSH (1 << 6) -#define S3C_ECR_STALL (1 << 1) -#define S3C_ECR_IEMS (1 << 0) -#define S3C_BRCR S3C_HSUDC_REG(0x34) /* Read Count */ -#define S3C_BWCR S3C_HSUDC_REG(0x38) /* Write Count */ -#define S3C_MPR S3C_HSUDC_REG(0x3c) /* Max Pkt Size */ - -#define WAIT_FOR_SETUP (0) -#define DATA_STATE_XMIT (1) -#define DATA_STATE_RECV (2) - -static const char * const s3c_hsudc_supply_names[] = { - "vdda", /* analog phy supply, 3.3V */ - "vddi", /* digital phy supply, 1.2V */ - "vddosc", /* oscillator supply, 1.8V - 3.3V */ -}; - -/** - * struct s3c_hsudc_ep - Endpoint representation used by driver. - * @ep: USB gadget layer representation of device endpoint. - * @name: Endpoint name (as required by ep autoconfiguration). - * @dev: Reference to the device controller to which this EP belongs. - * @desc: Endpoint descriptor obtained from the gadget driver. - * @queue: Transfer request queue for the endpoint. - * @stopped: Maintains state of endpoint, set if EP is halted. - * @bEndpointAddress: EP address (including direction bit). - * @fifo: Base address of EP FIFO. - */ -struct s3c_hsudc_ep { - struct usb_ep ep; - char name[20]; - struct s3c_hsudc *dev; - struct list_head queue; - u8 stopped; - u8 wedge; - u8 bEndpointAddress; - void __iomem *fifo; -}; - -/** - * struct s3c_hsudc_req - Driver encapsulation of USB gadget transfer request. - * @req: Reference to USB gadget transfer request. - * @queue: Used for inserting this request to the endpoint request queue. - */ -struct s3c_hsudc_req { - struct usb_request req; - struct list_head queue; -}; - -/** - * struct s3c_hsudc - Driver's abstraction of the device controller. - * @gadget: Instance of usb_gadget which is referenced by gadget driver. - * @driver: Reference to currently active gadget driver. - * @dev: The device reference used by probe function. - * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed). - * @regs: Remapped base address of controller's register space. - * irq: IRQ number used by the controller. - * uclk: Reference to the controller clock. - * ep0state: Current state of EP0. - * ep: List of endpoints supported by the controller. - */ -struct s3c_hsudc { - struct usb_gadget gadget; - struct usb_gadget_driver *driver; - struct device *dev; - struct s3c24xx_hsudc_platdata *pd; - struct usb_phy *transceiver; - struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)]; - spinlock_t lock; - void __iomem *regs; - int irq; - struct clk *uclk; - int ep0state; - struct s3c_hsudc_ep ep[]; -}; - -#define ep_maxpacket(_ep) ((_ep)->ep.maxpacket) -#define ep_is_in(_ep) ((_ep)->bEndpointAddress & USB_DIR_IN) -#define ep_index(_ep) ((_ep)->bEndpointAddress & \ - USB_ENDPOINT_NUMBER_MASK) - -static const char driver_name[] = "s3c-udc"; -static const char ep0name[] = "ep0-control"; - -static inline struct s3c_hsudc_req *our_req(struct usb_request *req) -{ - return container_of(req, struct s3c_hsudc_req, req); -} - -static inline struct s3c_hsudc_ep *our_ep(struct usb_ep *ep) -{ - return container_of(ep, struct s3c_hsudc_ep, ep); -} - -static inline struct s3c_hsudc *to_hsudc(struct usb_gadget *gadget) -{ - return container_of(gadget, struct s3c_hsudc, gadget); -} - -static inline void set_index(struct s3c_hsudc *hsudc, int ep_addr) -{ - ep_addr &= USB_ENDPOINT_NUMBER_MASK; - writel(ep_addr, hsudc->regs + S3C_IR); -} - -static inline void __orr32(void __iomem *ptr, u32 val) -{ - writel(readl(ptr) | val, ptr); -} - -/** - * s3c_hsudc_complete_request - Complete a transfer request. - * @hsep: Endpoint to which the request belongs. - * @hsreq: Transfer request to be completed. - * @status: Transfer completion status for the transfer request. - */ -static void s3c_hsudc_complete_request(struct s3c_hsudc_ep *hsep, - struct s3c_hsudc_req *hsreq, int status) -{ - unsigned int stopped = hsep->stopped; - struct s3c_hsudc *hsudc = hsep->dev; - - list_del_init(&hsreq->queue); - hsreq->req.status = status; - - if (!ep_index(hsep)) { - hsudc->ep0state = WAIT_FOR_SETUP; - hsep->bEndpointAddress &= ~USB_DIR_IN; - } - - hsep->stopped = 1; - spin_unlock(&hsudc->lock); - usb_gadget_giveback_request(&hsep->ep, &hsreq->req); - spin_lock(&hsudc->lock); - hsep->stopped = stopped; -} - -/** - * s3c_hsudc_nuke_ep - Terminate all requests queued for a endpoint. - * @hsep: Endpoint for which queued requests have to be terminated. - * @status: Transfer completion status for the transfer request. - */ -static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status) -{ - struct s3c_hsudc_req *hsreq; - - while (!list_empty(&hsep->queue)) { - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - s3c_hsudc_complete_request(hsep, hsreq, status); - } -} - -/** - * s3c_hsudc_stop_activity - Stop activity on all endpoints. - * @hsudc: Device controller for which EP activity is to be stopped. - * - * All the endpoints are stopped and any pending transfer requests if any on - * the endpoint are terminated. - */ -static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc) -{ - struct s3c_hsudc_ep *hsep; - int epnum; - - hsudc->gadget.speed = USB_SPEED_UNKNOWN; - - for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) { - hsep = &hsudc->ep[epnum]; - hsep->stopped = 1; - s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); - } -} - -/** - * s3c_hsudc_read_setup_pkt - Read the received setup packet from EP0 fifo. - * @hsudc: Device controller from which setup packet is to be read. - * @buf: The buffer into which the setup packet is read. - * - * The setup packet received in the EP0 fifo is read and stored into a - * given buffer address. - */ - -static void s3c_hsudc_read_setup_pkt(struct s3c_hsudc *hsudc, u16 *buf) -{ - int count; - - count = readl(hsudc->regs + S3C_BRCR); - while (count--) - *buf++ = (u16)readl(hsudc->regs + S3C_BR(0)); - - writel(S3C_EP0SR_RX_SUCCESS, hsudc->regs + S3C_EP0SR); -} - -/** - * s3c_hsudc_write_fifo - Write next chunk of transfer data to EP fifo. - * @hsep: Endpoint to which the data is to be written. - * @hsreq: Transfer request from which the next chunk of data is written. - * - * Write the next chunk of data from a transfer request to the endpoint FIFO. - * If the transfer request completes, 1 is returned, otherwise 0 is returned. - */ -static int s3c_hsudc_write_fifo(struct s3c_hsudc_ep *hsep, - struct s3c_hsudc_req *hsreq) -{ - u16 *buf; - u32 max = ep_maxpacket(hsep); - u32 count, length; - bool is_last; - void __iomem *fifo = hsep->fifo; - - buf = hsreq->req.buf + hsreq->req.actual; - prefetch(buf); - - length = hsreq->req.length - hsreq->req.actual; - length = min(length, max); - hsreq->req.actual += length; - - writel(length, hsep->dev->regs + S3C_BWCR); - for (count = 0; count < length; count += 2) - writel(*buf++, fifo); - - if (count != max) { - is_last = true; - } else { - if (hsreq->req.length != hsreq->req.actual || hsreq->req.zero) - is_last = false; - else - is_last = true; - } - - if (is_last) { - s3c_hsudc_complete_request(hsep, hsreq, 0); - return 1; - } - - return 0; -} - -/** - * s3c_hsudc_read_fifo - Read the next chunk of data from EP fifo. - * @hsep: Endpoint from which the data is to be read. - * @hsreq: Transfer request to which the next chunk of data read is written. - * - * Read the next chunk of data from the endpoint FIFO and a write it to the - * transfer request buffer. If the transfer request completes, 1 is returned, - * otherwise 0 is returned. - */ -static int s3c_hsudc_read_fifo(struct s3c_hsudc_ep *hsep, - struct s3c_hsudc_req *hsreq) -{ - struct s3c_hsudc *hsudc = hsep->dev; - u32 csr, offset; - u16 *buf, word; - u32 buflen, rcnt, rlen; - void __iomem *fifo = hsep->fifo; - u32 is_short = 0; - - offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR; - csr = readl(hsudc->regs + offset); - if (!(csr & S3C_ESR_RX_SUCCESS)) - return -EINVAL; - - buf = hsreq->req.buf + hsreq->req.actual; - prefetchw(buf); - buflen = hsreq->req.length - hsreq->req.actual; - - rcnt = readl(hsudc->regs + S3C_BRCR); - rlen = (csr & S3C_ESR_LWO) ? (rcnt * 2 - 1) : (rcnt * 2); - - hsreq->req.actual += min(rlen, buflen); - is_short = (rlen < hsep->ep.maxpacket); - - while (rcnt-- != 0) { - word = (u16)readl(fifo); - if (buflen) { - *buf++ = word; - buflen--; - } else { - hsreq->req.status = -EOVERFLOW; - } - } - - writel(S3C_ESR_RX_SUCCESS, hsudc->regs + offset); - - if (is_short || hsreq->req.actual == hsreq->req.length) { - s3c_hsudc_complete_request(hsep, hsreq, 0); - return 1; - } - - return 0; -} - -/** - * s3c_hsudc_epin_intr - Handle in-endpoint interrupt. - * @hsudc - Device controller for which the interrupt is to be handled. - * @ep_idx - Endpoint number on which an interrupt is pending. - * - * Handles interrupt for a in-endpoint. The interrupts that are handled are - * stall and data transmit complete interrupt. - */ -static void s3c_hsudc_epin_intr(struct s3c_hsudc *hsudc, u32 ep_idx) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx]; - struct s3c_hsudc_req *hsreq; - u32 csr; - - csr = readl(hsudc->regs + S3C_ESR); - if (csr & S3C_ESR_STALL) { - writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); - return; - } - - if (csr & S3C_ESR_TX_SUCCESS) { - writel(S3C_ESR_TX_SUCCESS, hsudc->regs + S3C_ESR); - if (list_empty(&hsep->queue)) - return; - - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - if ((s3c_hsudc_write_fifo(hsep, hsreq) == 0) && - (csr & S3C_ESR_PSIF_TWO)) - s3c_hsudc_write_fifo(hsep, hsreq); - } -} - -/** - * s3c_hsudc_epout_intr - Handle out-endpoint interrupt. - * @hsudc - Device controller for which the interrupt is to be handled. - * @ep_idx - Endpoint number on which an interrupt is pending. - * - * Handles interrupt for a out-endpoint. The interrupts that are handled are - * stall, flush and data ready interrupt. - */ -static void s3c_hsudc_epout_intr(struct s3c_hsudc *hsudc, u32 ep_idx) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx]; - struct s3c_hsudc_req *hsreq; - u32 csr; - - csr = readl(hsudc->regs + S3C_ESR); - if (csr & S3C_ESR_STALL) { - writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR); - return; - } - - if (csr & S3C_ESR_FLUSH) { - __orr32(hsudc->regs + S3C_ECR, S3C_ECR_FLUSH); - return; - } - - if (csr & S3C_ESR_RX_SUCCESS) { - if (list_empty(&hsep->queue)) - return; - - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - if (((s3c_hsudc_read_fifo(hsep, hsreq)) == 0) && - (csr & S3C_ESR_PSIF_TWO)) - s3c_hsudc_read_fifo(hsep, hsreq); - } -} - -/** s3c_hsudc_set_halt - Set or clear a endpoint halt. - * @_ep: Endpoint on which halt has to be set or cleared. - * @value: 1 for setting halt on endpoint, 0 to clear halt. - * - * Set or clear endpoint halt. If halt is set, the endpoint is stopped. - * If halt is cleared, for in-endpoints, if there are any pending - * transfer requests, transfers are started. - */ -static int s3c_hsudc_set_halt(struct usb_ep *_ep, int value) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - struct s3c_hsudc *hsudc = hsep->dev; - struct s3c_hsudc_req *hsreq; - unsigned long irqflags; - u32 ecr; - u32 offset; - - if (value && ep_is_in(hsep) && !list_empty(&hsep->queue)) - return -EAGAIN; - - spin_lock_irqsave(&hsudc->lock, irqflags); - set_index(hsudc, ep_index(hsep)); - offset = (ep_index(hsep)) ? S3C_ECR : S3C_EP0CR; - ecr = readl(hsudc->regs + offset); - - if (value) { - ecr |= S3C_ECR_STALL; - if (ep_index(hsep)) - ecr |= S3C_ECR_FLUSH; - hsep->stopped = 1; - } else { - ecr &= ~S3C_ECR_STALL; - hsep->stopped = hsep->wedge = 0; - } - writel(ecr, hsudc->regs + offset); - - if (ep_is_in(hsep) && !list_empty(&hsep->queue) && !value) { - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - if (hsreq) - s3c_hsudc_write_fifo(hsep, hsreq); - } - - spin_unlock_irqrestore(&hsudc->lock, irqflags); - return 0; -} - -/** s3c_hsudc_set_wedge - Sets the halt feature with the clear requests ignored - * @_ep: Endpoint on which wedge has to be set. - * - * Sets the halt feature with the clear requests ignored. - */ -static int s3c_hsudc_set_wedge(struct usb_ep *_ep) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - - if (!hsep) - return -EINVAL; - - hsep->wedge = 1; - return usb_ep_set_halt(_ep); -} - -/** s3c_hsudc_handle_reqfeat - Handle set feature or clear feature requests. - * @_ep: Device controller on which the set/clear feature needs to be handled. - * @ctrl: Control request as received on the endpoint 0. - * - * Handle set feature or clear feature control requests on the control endpoint. - */ -static int s3c_hsudc_handle_reqfeat(struct s3c_hsudc *hsudc, - struct usb_ctrlrequest *ctrl) -{ - struct s3c_hsudc_ep *hsep; - bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); - u8 ep_num = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK; - - if (ctrl->bRequestType == USB_RECIP_ENDPOINT) { - hsep = &hsudc->ep[ep_num]; - switch (le16_to_cpu(ctrl->wValue)) { - case USB_ENDPOINT_HALT: - if (set || !hsep->wedge) - s3c_hsudc_set_halt(&hsep->ep, set); - return 0; - } - } - - return -ENOENT; -} - -/** - * s3c_hsudc_process_req_status - Handle get status control request. - * @hsudc: Device controller on which get status request has be handled. - * @ctrl: Control request as received on the endpoint 0. - * - * Handle get status control request received on control endpoint. - */ -static void s3c_hsudc_process_req_status(struct s3c_hsudc *hsudc, - struct usb_ctrlrequest *ctrl) -{ - struct s3c_hsudc_ep *hsep0 = &hsudc->ep[0]; - struct s3c_hsudc_req hsreq; - struct s3c_hsudc_ep *hsep; - __le16 reply; - u8 epnum; - - switch (ctrl->bRequestType & USB_RECIP_MASK) { - case USB_RECIP_DEVICE: - reply = cpu_to_le16(0); - break; - - case USB_RECIP_INTERFACE: - reply = cpu_to_le16(0); - break; - - case USB_RECIP_ENDPOINT: - epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; - hsep = &hsudc->ep[epnum]; - reply = cpu_to_le16(hsep->stopped ? 1 : 0); - break; - } - - INIT_LIST_HEAD(&hsreq.queue); - hsreq.req.length = 2; - hsreq.req.buf = &reply; - hsreq.req.actual = 0; - hsreq.req.complete = NULL; - s3c_hsudc_write_fifo(hsep0, &hsreq); -} - -/** - * s3c_hsudc_process_setup - Process control request received on endpoint 0. - * @hsudc: Device controller on which control request has been received. - * - * Read the control request received on endpoint 0, decode it and handle - * the request. - */ -static void s3c_hsudc_process_setup(struct s3c_hsudc *hsudc) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[0]; - struct usb_ctrlrequest ctrl = {0}; - int ret; - - s3c_hsudc_nuke_ep(hsep, -EPROTO); - s3c_hsudc_read_setup_pkt(hsudc, (u16 *)&ctrl); - - if (ctrl.bRequestType & USB_DIR_IN) { - hsep->bEndpointAddress |= USB_DIR_IN; - hsudc->ep0state = DATA_STATE_XMIT; - } else { - hsep->bEndpointAddress &= ~USB_DIR_IN; - hsudc->ep0state = DATA_STATE_RECV; - } - - switch (ctrl.bRequest) { - case USB_REQ_SET_ADDRESS: - if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) - break; - hsudc->ep0state = WAIT_FOR_SETUP; - return; - - case USB_REQ_GET_STATUS: - if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) - break; - s3c_hsudc_process_req_status(hsudc, &ctrl); - return; - - case USB_REQ_SET_FEATURE: - case USB_REQ_CLEAR_FEATURE: - if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) - break; - s3c_hsudc_handle_reqfeat(hsudc, &ctrl); - hsudc->ep0state = WAIT_FOR_SETUP; - return; - } - - if (hsudc->driver) { - spin_unlock(&hsudc->lock); - ret = hsudc->driver->setup(&hsudc->gadget, &ctrl); - spin_lock(&hsudc->lock); - - if (ctrl.bRequest == USB_REQ_SET_CONFIGURATION) { - hsep->bEndpointAddress &= ~USB_DIR_IN; - hsudc->ep0state = WAIT_FOR_SETUP; - } - - if (ret < 0) { - dev_err(hsudc->dev, "setup failed, returned %d\n", - ret); - s3c_hsudc_set_halt(&hsep->ep, 1); - hsudc->ep0state = WAIT_FOR_SETUP; - hsep->bEndpointAddress &= ~USB_DIR_IN; - } - } -} - -/** s3c_hsudc_handle_ep0_intr - Handle endpoint 0 interrupt. - * @hsudc: Device controller on which endpoint 0 interrupt has occurred. - * - * Handle endpoint 0 interrupt when it occurs. EP0 interrupt could occur - * when a stall handshake is sent to host or data is sent/received on - * endpoint 0. - */ -static void s3c_hsudc_handle_ep0_intr(struct s3c_hsudc *hsudc) -{ - struct s3c_hsudc_ep *hsep = &hsudc->ep[0]; - struct s3c_hsudc_req *hsreq; - u32 csr = readl(hsudc->regs + S3C_EP0SR); - u32 ecr; - - if (csr & S3C_EP0SR_STALL) { - ecr = readl(hsudc->regs + S3C_EP0CR); - ecr &= ~(S3C_ECR_STALL | S3C_ECR_FLUSH); - writel(ecr, hsudc->regs + S3C_EP0CR); - - writel(S3C_EP0SR_STALL, hsudc->regs + S3C_EP0SR); - hsep->stopped = 0; - - s3c_hsudc_nuke_ep(hsep, -ECONNABORTED); - hsudc->ep0state = WAIT_FOR_SETUP; - hsep->bEndpointAddress &= ~USB_DIR_IN; - return; - } - - if (csr & S3C_EP0SR_TX_SUCCESS) { - writel(S3C_EP0SR_TX_SUCCESS, hsudc->regs + S3C_EP0SR); - if (ep_is_in(hsep)) { - if (list_empty(&hsep->queue)) - return; - - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - s3c_hsudc_write_fifo(hsep, hsreq); - } - } - - if (csr & S3C_EP0SR_RX_SUCCESS) { - if (hsudc->ep0state == WAIT_FOR_SETUP) - s3c_hsudc_process_setup(hsudc); - else { - if (!ep_is_in(hsep)) { - if (list_empty(&hsep->queue)) - return; - hsreq = list_entry(hsep->queue.next, - struct s3c_hsudc_req, queue); - s3c_hsudc_read_fifo(hsep, hsreq); - } - } - } -} - -/** - * s3c_hsudc_ep_enable - Enable a endpoint. - * @_ep: The endpoint to be enabled. - * @desc: Endpoint descriptor. - * - * Enables a endpoint when called from the gadget driver. Endpoint stall if - * any is cleared, transfer type is configured and endpoint interrupt is - * enabled. - */ -static int s3c_hsudc_ep_enable(struct usb_ep *_ep, - const struct usb_endpoint_descriptor *desc) -{ - struct s3c_hsudc_ep *hsep; - struct s3c_hsudc *hsudc; - unsigned long flags; - u32 ecr = 0; - - hsep = our_ep(_ep); - if (!_ep || !desc || _ep->name == ep0name - || desc->bDescriptorType != USB_DT_ENDPOINT - || hsep->bEndpointAddress != desc->bEndpointAddress - || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) - return -EINVAL; - - if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && usb_endpoint_maxp(desc) != ep_maxpacket(hsep)) - || !desc->wMaxPacketSize) - return -ERANGE; - - hsudc = hsep->dev; - if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - spin_lock_irqsave(&hsudc->lock, flags); - - set_index(hsudc, hsep->bEndpointAddress); - ecr |= ((usb_endpoint_xfer_int(desc)) ? S3C_ECR_IEMS : S3C_ECR_DUEN); - writel(ecr, hsudc->regs + S3C_ECR); - - hsep->stopped = hsep->wedge = 0; - hsep->ep.desc = desc; - hsep->ep.maxpacket = usb_endpoint_maxp(desc); - - s3c_hsudc_set_halt(_ep, 0); - __set_bit(ep_index(hsep), hsudc->regs + S3C_EIER); - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -/** - * s3c_hsudc_ep_disable - Disable a endpoint. - * @_ep: The endpoint to be disabled. - * @desc: Endpoint descriptor. - * - * Disables a endpoint when called from the gadget driver. - */ -static int s3c_hsudc_ep_disable(struct usb_ep *_ep) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - struct s3c_hsudc *hsudc = hsep->dev; - unsigned long flags; - - if (!_ep || !hsep->ep.desc) - return -EINVAL; - - spin_lock_irqsave(&hsudc->lock, flags); - - set_index(hsudc, hsep->bEndpointAddress); - __clear_bit(ep_index(hsep), hsudc->regs + S3C_EIER); - - s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN); - - hsep->ep.desc = NULL; - hsep->stopped = 1; - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -/** - * s3c_hsudc_alloc_request - Allocate a new request. - * @_ep: Endpoint for which request is allocated (not used). - * @gfp_flags: Flags used for the allocation. - * - * Allocates a single transfer request structure when called from gadget driver. - */ -static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep, - gfp_t gfp_flags) -{ - struct s3c_hsudc_req *hsreq; - - hsreq = kzalloc(sizeof(*hsreq), gfp_flags); - if (!hsreq) - return NULL; - - INIT_LIST_HEAD(&hsreq->queue); - return &hsreq->req; -} - -/** - * s3c_hsudc_free_request - Deallocate a request. - * @ep: Endpoint for which request is deallocated (not used). - * @_req: Request to be deallocated. - * - * Allocates a single transfer request structure when called from gadget driver. - */ -static void s3c_hsudc_free_request(struct usb_ep *ep, struct usb_request *_req) -{ - struct s3c_hsudc_req *hsreq; - - hsreq = our_req(_req); - WARN_ON(!list_empty(&hsreq->queue)); - kfree(hsreq); -} - -/** - * s3c_hsudc_queue - Queue a transfer request for the endpoint. - * @_ep: Endpoint for which the request is queued. - * @_req: Request to be queued. - * @gfp_flags: Not used. - * - * Start or enqueue a request for a endpoint when called from gadget driver. - */ -static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req, - gfp_t gfp_flags) -{ - struct s3c_hsudc_req *hsreq; - struct s3c_hsudc_ep *hsep; - struct s3c_hsudc *hsudc; - unsigned long flags; - u32 offset; - u32 csr; - - hsreq = our_req(_req); - if ((!_req || !_req->complete || !_req->buf || - !list_empty(&hsreq->queue))) - return -EINVAL; - - hsep = our_ep(_ep); - hsudc = hsep->dev; - if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - spin_lock_irqsave(&hsudc->lock, flags); - set_index(hsudc, hsep->bEndpointAddress); - - _req->status = -EINPROGRESS; - _req->actual = 0; - - if (!ep_index(hsep) && _req->length == 0) { - hsudc->ep0state = WAIT_FOR_SETUP; - s3c_hsudc_complete_request(hsep, hsreq, 0); - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; - } - - if (list_empty(&hsep->queue) && !hsep->stopped) { - offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR; - if (ep_is_in(hsep)) { - csr = readl(hsudc->regs + offset); - if (!(csr & S3C_ESR_TX_SUCCESS) && - (s3c_hsudc_write_fifo(hsep, hsreq) == 1)) - hsreq = NULL; - } else { - csr = readl(hsudc->regs + offset); - if ((csr & S3C_ESR_RX_SUCCESS) - && (s3c_hsudc_read_fifo(hsep, hsreq) == 1)) - hsreq = NULL; - } - } - - if (hsreq) - list_add_tail(&hsreq->queue, &hsep->queue); - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -/** - * s3c_hsudc_dequeue - Dequeue a transfer request from an endpoint. - * @_ep: Endpoint from which the request is dequeued. - * @_req: Request to be dequeued. - * - * Dequeue a request from a endpoint when called from gadget driver. - */ -static int s3c_hsudc_dequeue(struct usb_ep *_ep, struct usb_request *_req) -{ - struct s3c_hsudc_ep *hsep = our_ep(_ep); - struct s3c_hsudc *hsudc = hsep->dev; - struct s3c_hsudc_req *hsreq = NULL, *iter; - unsigned long flags; - - hsep = our_ep(_ep); - if (!_ep || hsep->ep.name == ep0name) - return -EINVAL; - - spin_lock_irqsave(&hsudc->lock, flags); - - list_for_each_entry(iter, &hsep->queue, queue) { - if (&iter->req != _req) - continue; - hsreq = iter; - break; - } - if (!hsreq) { - spin_unlock_irqrestore(&hsudc->lock, flags); - return -EINVAL; - } - - set_index(hsudc, hsep->bEndpointAddress); - s3c_hsudc_complete_request(hsep, hsreq, -ECONNRESET); - - spin_unlock_irqrestore(&hsudc->lock, flags); - return 0; -} - -static const struct usb_ep_ops s3c_hsudc_ep_ops = { - .enable = s3c_hsudc_ep_enable, - .disable = s3c_hsudc_ep_disable, - .alloc_request = s3c_hsudc_alloc_request, - .free_request = s3c_hsudc_free_request, - .queue = s3c_hsudc_queue, - .dequeue = s3c_hsudc_dequeue, - .set_halt = s3c_hsudc_set_halt, - .set_wedge = s3c_hsudc_set_wedge, -}; - -/** - * s3c_hsudc_initep - Initialize a endpoint to default state. - * @hsudc - Reference to the device controller. - * @hsep - Endpoint to be initialized. - * @epnum - Address to be assigned to the endpoint. - * - * Initialize a endpoint with default configuration. - */ -static void s3c_hsudc_initep(struct s3c_hsudc *hsudc, - struct s3c_hsudc_ep *hsep, int epnum) -{ - char *dir; - - if ((epnum % 2) == 0) { - dir = "out"; - } else { - dir = "in"; - hsep->bEndpointAddress = USB_DIR_IN; - } - - hsep->bEndpointAddress |= epnum; - if (epnum) - snprintf(hsep->name, sizeof(hsep->name), "ep%d%s", epnum, dir); - else - snprintf(hsep->name, sizeof(hsep->name), "%s", ep0name); - - INIT_LIST_HEAD(&hsep->queue); - INIT_LIST_HEAD(&hsep->ep.ep_list); - if (epnum) - list_add_tail(&hsep->ep.ep_list, &hsudc->gadget.ep_list); - - hsep->dev = hsudc; - hsep->ep.name = hsep->name; - usb_ep_set_maxpacket_limit(&hsep->ep, epnum ? 512 : 64); - hsep->ep.ops = &s3c_hsudc_ep_ops; - hsep->fifo = hsudc->regs + S3C_BR(epnum); - hsep->ep.desc = NULL; - hsep->stopped = 0; - hsep->wedge = 0; - - if (epnum == 0) { - hsep->ep.caps.type_control = true; - hsep->ep.caps.dir_in = true; - hsep->ep.caps.dir_out = true; - } else { - hsep->ep.caps.type_iso = true; - hsep->ep.caps.type_bulk = true; - hsep->ep.caps.type_int = true; - } - - if (epnum & 1) - hsep->ep.caps.dir_in = true; - else - hsep->ep.caps.dir_out = true; - - set_index(hsudc, epnum); - writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR); -} - -/** - * s3c_hsudc_setup_ep - Configure all endpoints to default state. - * @hsudc: Reference to device controller. - * - * Configures all endpoints to default state. - */ -static void s3c_hsudc_setup_ep(struct s3c_hsudc *hsudc) -{ - int epnum; - - hsudc->ep0state = WAIT_FOR_SETUP; - INIT_LIST_HEAD(&hsudc->gadget.ep_list); - for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) - s3c_hsudc_initep(hsudc, &hsudc->ep[epnum], epnum); -} - -/** - * s3c_hsudc_reconfig - Reconfigure the device controller to default state. - * @hsudc: Reference to device controller. - * - * Reconfigures the device controller registers to a default state. - */ -static void s3c_hsudc_reconfig(struct s3c_hsudc *hsudc) -{ - writel(0xAA, hsudc->regs + S3C_EDR); - writel(1, hsudc->regs + S3C_EIER); - writel(0, hsudc->regs + S3C_TR); - writel(S3C_SCR_DTZIEN_EN | S3C_SCR_RRD_EN | S3C_SCR_SUS_EN | - S3C_SCR_RST_EN, hsudc->regs + S3C_SCR); - writel(0, hsudc->regs + S3C_EP0CR); - - s3c_hsudc_setup_ep(hsudc); -} - -/** - * s3c_hsudc_irq - Interrupt handler for device controller. - * @irq: Not used. - * @_dev: Reference to the device controller. - * - * Interrupt handler for the device controller. This handler handles controller - * interrupts and endpoint interrupts. - */ -static irqreturn_t s3c_hsudc_irq(int irq, void *_dev) -{ - struct s3c_hsudc *hsudc = _dev; - struct s3c_hsudc_ep *hsep; - u32 ep_intr; - u32 sys_status; - u32 ep_idx; - - spin_lock(&hsudc->lock); - - sys_status = readl(hsudc->regs + S3C_SSR); - ep_intr = readl(hsudc->regs + S3C_EIR) & 0x3FF; - - if (!ep_intr && !(sys_status & S3C_SSR_DTZIEN_EN)) { - spin_unlock(&hsudc->lock); - return IRQ_HANDLED; - } - - if (sys_status) { - if (sys_status & S3C_SSR_VBUSON) - writel(S3C_SSR_VBUSON, hsudc->regs + S3C_SSR); - - if (sys_status & S3C_SSR_ERR) - writel(S3C_SSR_ERR, hsudc->regs + S3C_SSR); - - if (sys_status & S3C_SSR_SDE) { - writel(S3C_SSR_SDE, hsudc->regs + S3C_SSR); - hsudc->gadget.speed = (sys_status & S3C_SSR_HSP) ? - USB_SPEED_HIGH : USB_SPEED_FULL; - } - - if (sys_status & S3C_SSR_SUSPEND) { - writel(S3C_SSR_SUSPEND, hsudc->regs + S3C_SSR); - if (hsudc->gadget.speed != USB_SPEED_UNKNOWN - && hsudc->driver && hsudc->driver->suspend) - hsudc->driver->suspend(&hsudc->gadget); - } - - if (sys_status & S3C_SSR_RESUME) { - writel(S3C_SSR_RESUME, hsudc->regs + S3C_SSR); - if (hsudc->gadget.speed != USB_SPEED_UNKNOWN - && hsudc->driver && hsudc->driver->resume) - hsudc->driver->resume(&hsudc->gadget); - } - - if (sys_status & S3C_SSR_RESET) { - writel(S3C_SSR_RESET, hsudc->regs + S3C_SSR); - for (ep_idx = 0; ep_idx < hsudc->pd->epnum; ep_idx++) { - hsep = &hsudc->ep[ep_idx]; - hsep->stopped = 1; - s3c_hsudc_nuke_ep(hsep, -ECONNRESET); - } - s3c_hsudc_reconfig(hsudc); - hsudc->ep0state = WAIT_FOR_SETUP; - } - } - - if (ep_intr & S3C_EIR_EP0) { - writel(S3C_EIR_EP0, hsudc->regs + S3C_EIR); - set_index(hsudc, 0); - s3c_hsudc_handle_ep0_intr(hsudc); - } - - ep_intr >>= 1; - ep_idx = 1; - while (ep_intr) { - if (ep_intr & 1) { - hsep = &hsudc->ep[ep_idx]; - set_index(hsudc, ep_idx); - writel(1 << ep_idx, hsudc->regs + S3C_EIR); - if (ep_is_in(hsep)) - s3c_hsudc_epin_intr(hsudc, ep_idx); - else - s3c_hsudc_epout_intr(hsudc, ep_idx); - } - ep_intr >>= 1; - ep_idx++; - } - - spin_unlock(&hsudc->lock); - return IRQ_HANDLED; -} - -static int s3c_hsudc_start(struct usb_gadget *gadget, - struct usb_gadget_driver *driver) -{ - struct s3c_hsudc *hsudc = to_hsudc(gadget); - int ret; - - if (!driver - || driver->max_speed < USB_SPEED_FULL - || !driver->setup) - return -EINVAL; - - if (!hsudc) - return -ENODEV; - - if (hsudc->driver) - return -EBUSY; - - hsudc->driver = driver; - - ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies), - hsudc->supplies); - if (ret != 0) { - dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret); - goto err_supplies; - } - - /* connect to bus through transceiver */ - if (!IS_ERR_OR_NULL(hsudc->transceiver)) { - ret = otg_set_peripheral(hsudc->transceiver->otg, - &hsudc->gadget); - if (ret) { - dev_err(hsudc->dev, "%s: can't bind to transceiver\n", - hsudc->gadget.name); - goto err_otg; - } - } - - enable_irq(hsudc->irq); - s3c_hsudc_reconfig(hsudc); - - pm_runtime_get_sync(hsudc->dev); - - if (hsudc->pd->phy_init) - hsudc->pd->phy_init(); - if (hsudc->pd->gpio_init) - hsudc->pd->gpio_init(); - - return 0; -err_otg: - regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); -err_supplies: - hsudc->driver = NULL; - return ret; -} - -static int s3c_hsudc_stop(struct usb_gadget *gadget) -{ - struct s3c_hsudc *hsudc = to_hsudc(gadget); - unsigned long flags; - - if (!hsudc) - return -ENODEV; - - spin_lock_irqsave(&hsudc->lock, flags); - hsudc->gadget.speed = USB_SPEED_UNKNOWN; - if (hsudc->pd->phy_uninit) - hsudc->pd->phy_uninit(); - - pm_runtime_put(hsudc->dev); - - if (hsudc->pd->gpio_uninit) - hsudc->pd->gpio_uninit(); - s3c_hsudc_stop_activity(hsudc); - spin_unlock_irqrestore(&hsudc->lock, flags); - - if (!IS_ERR_OR_NULL(hsudc->transceiver)) - (void) otg_set_peripheral(hsudc->transceiver->otg, NULL); - - disable_irq(hsudc->irq); - - regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); - hsudc->driver = NULL; - - return 0; -} - -static inline u32 s3c_hsudc_read_frameno(struct s3c_hsudc *hsudc) -{ - return readl(hsudc->regs + S3C_FNR) & 0x3FF; -} - -static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget) -{ - return s3c_hsudc_read_frameno(to_hsudc(gadget)); -} - -static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) -{ - struct s3c_hsudc *hsudc = to_hsudc(gadget); - - if (!hsudc) - return -ENODEV; - - if (!IS_ERR_OR_NULL(hsudc->transceiver)) - return usb_phy_set_power(hsudc->transceiver, mA); - - return -EOPNOTSUPP; -} - -static const struct usb_gadget_ops s3c_hsudc_gadget_ops = { - .get_frame = s3c_hsudc_gadget_getframe, - .udc_start = s3c_hsudc_start, - .udc_stop = s3c_hsudc_stop, - .vbus_draw = s3c_hsudc_vbus_draw, -}; - -static int s3c_hsudc_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct s3c_hsudc *hsudc; - struct s3c24xx_hsudc_platdata *pd = dev_get_platdata(&pdev->dev); - int ret, i; - - hsudc = devm_kzalloc(&pdev->dev, struct_size(hsudc, ep, pd->epnum), - GFP_KERNEL); - if (!hsudc) - return -ENOMEM; - - platform_set_drvdata(pdev, dev); - hsudc->dev = dev; - hsudc->pd = dev_get_platdata(&pdev->dev); - - hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - - for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++) - hsudc->supplies[i].supply = s3c_hsudc_supply_names[i]; - - ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies), - hsudc->supplies); - if (ret != 0) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to request supplies: %d\n", ret); - goto err_supplies; - } - - hsudc->regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(hsudc->regs)) { - ret = PTR_ERR(hsudc->regs); - goto err_res; - } - - spin_lock_init(&hsudc->lock); - - hsudc->gadget.max_speed = USB_SPEED_HIGH; - hsudc->gadget.ops = &s3c_hsudc_gadget_ops; - hsudc->gadget.name = dev_name(dev); - hsudc->gadget.ep0 = &hsudc->ep[0].ep; - hsudc->gadget.is_otg = 0; - hsudc->gadget.is_a_peripheral = 0; - hsudc->gadget.speed = USB_SPEED_UNKNOWN; - - s3c_hsudc_setup_ep(hsudc); - - ret = platform_get_irq(pdev, 0); - if (ret < 0) - goto err_res; - hsudc->irq = ret; - - ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0, - driver_name, hsudc); - if (ret < 0) { - dev_err(dev, "irq request failed\n"); - goto err_res; - } - - hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device"); - if (IS_ERR(hsudc->uclk)) { - dev_err(dev, "failed to find usb-device clock source\n"); - ret = PTR_ERR(hsudc->uclk); - goto err_res; - } - clk_enable(hsudc->uclk); - - local_irq_disable(); - - disable_irq(hsudc->irq); - local_irq_enable(); - - ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget); - if (ret) - goto err_add_udc; - - pm_runtime_enable(dev); - - return 0; -err_add_udc: - clk_disable(hsudc->uclk); -err_res: - if (!IS_ERR_OR_NULL(hsudc->transceiver)) - usb_put_phy(hsudc->transceiver); - -err_supplies: - return ret; -} - -static struct platform_driver s3c_hsudc_driver = { - .driver = { - .name = "s3c-hsudc", - }, - .probe = s3c_hsudc_probe, -}; - -module_platform_driver(s3c_hsudc_driver); - -MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver"); -MODULE_AUTHOR("Thomas Abraham "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s3c-hsudc"); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c deleted file mode 100644 index 8c57b19..0000000 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ /dev/null @@ -1,1980 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * linux/drivers/usb/gadget/s3c2410_udc.c - * - * Samsung S3C24xx series on-chip full speed USB device controllers - * - * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard - * Additional cleanups by Ben Dooks - */ - -#define pr_fmt(fmt) "s3c2410_udc: " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include - -#include - -#include "s3c2410_udc.h" -#include "s3c2410_udc_regs.h" - -#define DRIVER_DESC "S3C2410 USB Device Controller Gadget" -#define DRIVER_AUTHOR "Herbert Pötzl , " \ - "Arnaud Patard " - -static const char gadget_name[] = "s3c2410_udc"; -static const char driver_desc[] = DRIVER_DESC; - -static struct s3c2410_udc *the_controller; -static struct clk *udc_clock; -static struct clk *usb_bus_clock; -static void __iomem *base_addr; -static int irq_usbd; -static struct dentry *s3c2410_udc_debugfs_root; - -static inline u32 udc_read(u32 reg) -{ - return readb(base_addr + reg); -} - -static inline void udc_write(u32 value, u32 reg) -{ - writeb(value, base_addr + reg); -} - -static inline void udc_writeb(void __iomem *base, u32 value, u32 reg) -{ - writeb(value, base + reg); -} - -static struct s3c2410_udc_mach_info *udc_info; - -/*************************** DEBUG FUNCTION ***************************/ -#define DEBUG_NORMAL 1 -#define DEBUG_VERBOSE 2 - -#ifdef CONFIG_USB_S3C2410_DEBUG -#define USB_S3C2410_DEBUG_LEVEL 0 - -static uint32_t s3c2410_ticks = 0; - -__printf(2, 3) -static void dprintk(int level, const char *fmt, ...) -{ - static long prevticks; - static int invocation; - struct va_format vaf; - va_list args; - - if (level > USB_S3C2410_DEBUG_LEVEL) - return; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - if (s3c2410_ticks != prevticks) { - prevticks = s3c2410_ticks; - invocation = 0; - } - - pr_debug("%1lu.%02d USB: %pV", prevticks, invocation++, &vaf); - - va_end(args); -} -#else -__printf(2, 3) -static void dprintk(int level, const char *fmt, ...) -{ -} -#endif - -static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p) -{ - u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; - u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; - u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2; - u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2; - - addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG); - pwr_reg = udc_read(S3C2410_UDC_PWR_REG); - ep_int_reg = udc_read(S3C2410_UDC_EP_INT_REG); - usb_int_reg = udc_read(S3C2410_UDC_USB_INT_REG); - ep_int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); - usb_int_en_reg = udc_read(S3C2410_UDC_USB_INT_EN_REG); - udc_write(0, S3C2410_UDC_INDEX_REG); - ep0_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); - udc_write(1, S3C2410_UDC_INDEX_REG); - ep1_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); - ep1_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); - ep1_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); - ep1_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); - udc_write(2, S3C2410_UDC_INDEX_REG); - ep2_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); - ep2_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); - ep2_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); - ep2_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); - - seq_printf(m, "FUNC_ADDR_REG : 0x%04X\n" - "PWR_REG : 0x%04X\n" - "EP_INT_REG : 0x%04X\n" - "USB_INT_REG : 0x%04X\n" - "EP_INT_EN_REG : 0x%04X\n" - "USB_INT_EN_REG : 0x%04X\n" - "EP0_CSR : 0x%04X\n" - "EP1_I_CSR1 : 0x%04X\n" - "EP1_I_CSR2 : 0x%04X\n" - "EP1_O_CSR1 : 0x%04X\n" - "EP1_O_CSR2 : 0x%04X\n" - "EP2_I_CSR1 : 0x%04X\n" - "EP2_I_CSR2 : 0x%04X\n" - "EP2_O_CSR1 : 0x%04X\n" - "EP2_O_CSR2 : 0x%04X\n", - addr_reg, pwr_reg, ep_int_reg, usb_int_reg, - ep_int_en_reg, usb_int_en_reg, ep0_csr, - ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2, - ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2 - ); - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs); - -/* io macros */ - -static inline void s3c2410_udc_clear_ep0_opr(void __iomem *base) -{ - udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(base, S3C2410_UDC_EP0_CSR_SOPKTRDY, - S3C2410_UDC_EP0_CSR_REG); -} - -static inline void s3c2410_udc_clear_ep0_sst(void __iomem *base) -{ - udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - writeb(0x00, base + S3C2410_UDC_EP0_CSR_REG); -} - -static inline void s3c2410_udc_clear_ep0_se(void __iomem *base) -{ - udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(base, S3C2410_UDC_EP0_CSR_SSE, S3C2410_UDC_EP0_CSR_REG); -} - -static inline void s3c2410_udc_set_ep0_ipr(void __iomem *base) -{ - udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(base, S3C2410_UDC_EP0_CSR_IPKRDY, S3C2410_UDC_EP0_CSR_REG); -} - -static inline void s3c2410_udc_set_ep0_de(void __iomem *base) -{ - udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(base, S3C2410_UDC_EP0_CSR_DE, S3C2410_UDC_EP0_CSR_REG); -} - -static inline void s3c2410_udc_set_ep0_ss(void __iomem *b) -{ - udc_writeb(b, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(b, S3C2410_UDC_EP0_CSR_SENDSTL, S3C2410_UDC_EP0_CSR_REG); -} - -static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base) -{ - udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - - udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY - | S3C2410_UDC_EP0_CSR_DE), - S3C2410_UDC_EP0_CSR_REG); -} - -static inline void s3c2410_udc_set_ep0_de_in(void __iomem *base) -{ - udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - udc_writeb(base, (S3C2410_UDC_EP0_CSR_IPKRDY - | S3C2410_UDC_EP0_CSR_DE), - S3C2410_UDC_EP0_CSR_REG); -} - -/*------------------------- I/O ----------------------------------*/ - -/* - * s3c2410_udc_done - */ -static void s3c2410_udc_done(struct s3c2410_ep *ep, - struct s3c2410_request *req, int status) -{ - unsigned halted = ep->halted; - - list_del_init(&req->queue); - - if (likely(req->req.status == -EINPROGRESS)) - req->req.status = status; - else - status = req->req.status; - - ep->halted = 1; - usb_gadget_giveback_request(&ep->ep, &req->req); - ep->halted = halted; -} - -static void s3c2410_udc_nuke(struct s3c2410_udc *udc, - struct s3c2410_ep *ep, int status) -{ - while (!list_empty(&ep->queue)) { - struct s3c2410_request *req; - req = list_entry(ep->queue.next, struct s3c2410_request, - queue); - s3c2410_udc_done(ep, req, status); - } -} - -static inline int s3c2410_udc_fifo_count_out(void) -{ - int tmp; - - tmp = udc_read(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8; - tmp |= udc_read(S3C2410_UDC_OUT_FIFO_CNT1_REG); - return tmp; -} - -/* - * s3c2410_udc_write_packet - */ -static inline int s3c2410_udc_write_packet(int fifo, - struct s3c2410_request *req, - unsigned max) -{ - unsigned len = min(req->req.length - req->req.actual, max); - u8 *buf = req->req.buf + req->req.actual; - - prefetch(buf); - - dprintk(DEBUG_VERBOSE, "%s %d %d %d %d\n", __func__, - req->req.actual, req->req.length, len, req->req.actual + len); - - req->req.actual += len; - - udelay(5); - writesb(base_addr + fifo, buf, len); - return len; -} - -/* - * s3c2410_udc_write_fifo - * - * return: 0 = still running, 1 = completed, negative = errno - */ -static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, - struct s3c2410_request *req) -{ - unsigned count; - int is_last; - u32 idx; - int fifo_reg; - u32 ep_csr; - - idx = ep->bEndpointAddress & 0x7F; - switch (idx) { - default: - idx = 0; - fallthrough; - case 0: - fifo_reg = S3C2410_UDC_EP0_FIFO_REG; - break; - case 1: - fifo_reg = S3C2410_UDC_EP1_FIFO_REG; - break; - case 2: - fifo_reg = S3C2410_UDC_EP2_FIFO_REG; - break; - case 3: - fifo_reg = S3C2410_UDC_EP3_FIFO_REG; - break; - case 4: - fifo_reg = S3C2410_UDC_EP4_FIFO_REG; - break; - } - - count = s3c2410_udc_write_packet(fifo_reg, req, ep->ep.maxpacket); - - /* last packet is often short (sometimes a zlp) */ - if (count != ep->ep.maxpacket) - is_last = 1; - else if (req->req.length != req->req.actual || req->req.zero) - is_last = 0; - else - is_last = 2; - - /* Only ep0 debug messages are interesting */ - if (idx == 0) - dprintk(DEBUG_NORMAL, - "Written ep%d %d.%d of %d b [last %d,z %d]\n", - idx, count, req->req.actual, req->req.length, - is_last, req->req.zero); - - if (is_last) { - /* The order is important. It prevents sending 2 packets - * at the same time */ - - if (idx == 0) { - /* Reset signal => no need to say 'data sent' */ - if (!(udc_read(S3C2410_UDC_USB_INT_REG) - & S3C2410_UDC_USBINT_RESET)) - s3c2410_udc_set_ep0_de_in(base_addr); - ep->dev->ep0state = EP0_IDLE; - } else { - udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); - udc_write(idx, S3C2410_UDC_INDEX_REG); - udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, - S3C2410_UDC_IN_CSR1_REG); - } - - s3c2410_udc_done(ep, req, 0); - is_last = 1; - } else { - if (idx == 0) { - /* Reset signal => no need to say 'data sent' */ - if (!(udc_read(S3C2410_UDC_USB_INT_REG) - & S3C2410_UDC_USBINT_RESET)) - s3c2410_udc_set_ep0_ipr(base_addr); - } else { - udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); - udc_write(idx, S3C2410_UDC_INDEX_REG); - udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, - S3C2410_UDC_IN_CSR1_REG); - } - } - - return is_last; -} - -static inline int s3c2410_udc_read_packet(int fifo, u8 *buf, - struct s3c2410_request *req, unsigned avail) -{ - unsigned len; - - len = min(req->req.length - req->req.actual, avail); - req->req.actual += len; - - readsb(fifo + base_addr, buf, len); - return len; -} - -/* - * return: 0 = still running, 1 = queue empty, negative = errno - */ -static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, - struct s3c2410_request *req) -{ - u8 *buf; - u32 ep_csr; - unsigned bufferspace; - int is_last = 1; - unsigned avail; - int fifo_count = 0; - u32 idx; - int fifo_reg; - - idx = ep->bEndpointAddress & 0x7F; - - switch (idx) { - default: - idx = 0; - fallthrough; - case 0: - fifo_reg = S3C2410_UDC_EP0_FIFO_REG; - break; - case 1: - fifo_reg = S3C2410_UDC_EP1_FIFO_REG; - break; - case 2: - fifo_reg = S3C2410_UDC_EP2_FIFO_REG; - break; - case 3: - fifo_reg = S3C2410_UDC_EP3_FIFO_REG; - break; - case 4: - fifo_reg = S3C2410_UDC_EP4_FIFO_REG; - break; - } - - if (!req->req.length) - return 1; - - buf = req->req.buf + req->req.actual; - bufferspace = req->req.length - req->req.actual; - if (!bufferspace) { - dprintk(DEBUG_NORMAL, "%s: buffer full!\n", __func__); - return -1; - } - - udc_write(idx, S3C2410_UDC_INDEX_REG); - - fifo_count = s3c2410_udc_fifo_count_out(); - dprintk(DEBUG_NORMAL, "%s fifo count : %d\n", __func__, fifo_count); - - if (fifo_count > ep->ep.maxpacket) - avail = ep->ep.maxpacket; - else - avail = fifo_count; - - fifo_count = s3c2410_udc_read_packet(fifo_reg, buf, req, avail); - - /* checking this with ep0 is not accurate as we already - * read a control request - **/ - if (idx != 0 && fifo_count < ep->ep.maxpacket) { - is_last = 1; - /* overflowed this request? flush extra data */ - if (fifo_count != avail) - req->req.status = -EOVERFLOW; - } else { - is_last = (req->req.length <= req->req.actual) ? 1 : 0; - } - - udc_write(idx, S3C2410_UDC_INDEX_REG); - fifo_count = s3c2410_udc_fifo_count_out(); - - /* Only ep0 debug messages are interesting */ - if (idx == 0) - dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n", - __func__, fifo_count, is_last); - - if (is_last) { - if (idx == 0) { - s3c2410_udc_set_ep0_de_out(base_addr); - ep->dev->ep0state = EP0_IDLE; - } else { - udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); - udc_write(idx, S3C2410_UDC_INDEX_REG); - udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, - S3C2410_UDC_OUT_CSR1_REG); - } - - s3c2410_udc_done(ep, req, 0); - } else { - if (idx == 0) { - s3c2410_udc_clear_ep0_opr(base_addr); - } else { - udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); - udc_write(idx, S3C2410_UDC_INDEX_REG); - udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, - S3C2410_UDC_OUT_CSR1_REG); - } - } - - return is_last; -} - -static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq) -{ - unsigned char *outbuf = (unsigned char *)crq; - int bytes_read = 0; - - udc_write(0, S3C2410_UDC_INDEX_REG); - - bytes_read = s3c2410_udc_fifo_count_out(); - - dprintk(DEBUG_NORMAL, "%s: fifo_count=%d\n", __func__, bytes_read); - - if (bytes_read > sizeof(struct usb_ctrlrequest)) - bytes_read = sizeof(struct usb_ctrlrequest); - - readsb(S3C2410_UDC_EP0_FIFO_REG + base_addr, outbuf, bytes_read); - - dprintk(DEBUG_VERBOSE, "%s: len=%d %02x:%02x {%x,%x,%x}\n", __func__, - bytes_read, crq->bRequest, crq->bRequestType, - crq->wValue, crq->wIndex, crq->wLength); - - return bytes_read; -} - -static int s3c2410_udc_get_status(struct s3c2410_udc *dev, - struct usb_ctrlrequest *crq) -{ - u16 status = 0; - u8 ep_num = crq->wIndex & 0x7F; - u8 is_in = crq->wIndex & USB_DIR_IN; - - switch (crq->bRequestType & USB_RECIP_MASK) { - case USB_RECIP_INTERFACE: - break; - - case USB_RECIP_DEVICE: - status = dev->devstatus; - break; - - case USB_RECIP_ENDPOINT: - if (ep_num > 4 || crq->wLength > 2) - return 1; - - if (ep_num == 0) { - udc_write(0, S3C2410_UDC_INDEX_REG); - status = udc_read(S3C2410_UDC_IN_CSR1_REG); - status = status & S3C2410_UDC_EP0_CSR_SENDSTL; - } else { - udc_write(ep_num, S3C2410_UDC_INDEX_REG); - if (is_in) { - status = udc_read(S3C2410_UDC_IN_CSR1_REG); - status = status & S3C2410_UDC_ICSR1_SENDSTL; - } else { - status = udc_read(S3C2410_UDC_OUT_CSR1_REG); - status = status & S3C2410_UDC_OCSR1_SENDSTL; - } - } - - status = status ? 1 : 0; - break; - - default: - return 1; - } - - /* Seems to be needed to get it working. ouch :( */ - udelay(5); - udc_write(status & 0xFF, S3C2410_UDC_EP0_FIFO_REG); - udc_write(status >> 8, S3C2410_UDC_EP0_FIFO_REG); - s3c2410_udc_set_ep0_de_in(base_addr); - - return 0; -} -/*------------------------- usb state machine -------------------------------*/ -static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value); - -static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, - struct s3c2410_ep *ep, - struct usb_ctrlrequest *crq, - u32 ep0csr) -{ - int len, ret, tmp; - - /* start control request? */ - if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY)) - return; - - s3c2410_udc_nuke(dev, ep, -EPROTO); - - len = s3c2410_udc_read_fifo_crq(crq); - if (len != sizeof(*crq)) { - dprintk(DEBUG_NORMAL, "setup begin: fifo READ ERROR" - " wanted %d bytes got %d. Stalling out...\n", - sizeof(*crq), len); - s3c2410_udc_set_ep0_ss(base_addr); - return; - } - - dprintk(DEBUG_NORMAL, "bRequest = %d bRequestType %d wLength = %d\n", - crq->bRequest, crq->bRequestType, crq->wLength); - - /* cope with automagic for some standard requests. */ - dev->req_std = (crq->bRequestType & USB_TYPE_MASK) - == USB_TYPE_STANDARD; - dev->req_config = 0; - dev->req_pending = 1; - - switch (crq->bRequest) { - case USB_REQ_SET_CONFIGURATION: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n"); - - if (crq->bRequestType == USB_RECIP_DEVICE) { - dev->req_config = 1; - s3c2410_udc_set_ep0_de_out(base_addr); - } - break; - - case USB_REQ_SET_INTERFACE: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n"); - - if (crq->bRequestType == USB_RECIP_INTERFACE) { - dev->req_config = 1; - s3c2410_udc_set_ep0_de_out(base_addr); - } - break; - - case USB_REQ_SET_ADDRESS: - dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n"); - - if (crq->bRequestType == USB_RECIP_DEVICE) { - tmp = crq->wValue & 0x7F; - dev->address = tmp; - udc_write((tmp | S3C2410_UDC_FUNCADDR_UPDATE), - S3C2410_UDC_FUNC_ADDR_REG); - s3c2410_udc_set_ep0_de_out(base_addr); - return; - } - break; - - case USB_REQ_GET_STATUS: - dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n"); - s3c2410_udc_clear_ep0_opr(base_addr); - - if (dev->req_std) { - if (!s3c2410_udc_get_status(dev, crq)) - return; - } - break; - - case USB_REQ_CLEAR_FEATURE: - s3c2410_udc_clear_ep0_opr(base_addr); - - if (crq->bRequestType != USB_RECIP_ENDPOINT) - break; - - if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) - break; - - s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 0); - s3c2410_udc_set_ep0_de_out(base_addr); - return; - - case USB_REQ_SET_FEATURE: - s3c2410_udc_clear_ep0_opr(base_addr); - - if (crq->bRequestType != USB_RECIP_ENDPOINT) - break; - - if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) - break; - - s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 1); - s3c2410_udc_set_ep0_de_out(base_addr); - return; - - default: - s3c2410_udc_clear_ep0_opr(base_addr); - break; - } - - if (crq->bRequestType & USB_DIR_IN) - dev->ep0state = EP0_IN_DATA_PHASE; - else - dev->ep0state = EP0_OUT_DATA_PHASE; - - if (!dev->driver) - return; - - /* deliver the request to the gadget driver */ - ret = dev->driver->setup(&dev->gadget, crq); - if (ret < 0) { - if (dev->req_config) { - dprintk(DEBUG_NORMAL, "config change %02x fail %d?\n", - crq->bRequest, ret); - return; - } - - if (ret == -EOPNOTSUPP) - dprintk(DEBUG_NORMAL, "Operation not supported\n"); - else - dprintk(DEBUG_NORMAL, - "dev->driver->setup failed. (%d)\n", ret); - - udelay(5); - s3c2410_udc_set_ep0_ss(base_addr); - s3c2410_udc_set_ep0_de_out(base_addr); - dev->ep0state = EP0_IDLE; - /* deferred i/o == no response yet */ - } else if (dev->req_pending) { - dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n"); - dev->req_pending = 0; - } - - dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]); -} - -static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev) -{ - u32 ep0csr; - struct s3c2410_ep *ep = &dev->ep[0]; - struct s3c2410_request *req; - struct usb_ctrlrequest crq; - - if (list_empty(&ep->queue)) - req = NULL; - else - req = list_entry(ep->queue.next, struct s3c2410_request, queue); - - /* We make the assumption that S3C2410_UDC_IN_CSR1_REG equal to - * S3C2410_UDC_EP0_CSR_REG when index is zero */ - - udc_write(0, S3C2410_UDC_INDEX_REG); - ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); - - dprintk(DEBUG_NORMAL, "ep0csr %x ep0state %s\n", - ep0csr, ep0states[dev->ep0state]); - - /* clear stall status */ - if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { - s3c2410_udc_nuke(dev, ep, -EPIPE); - dprintk(DEBUG_NORMAL, "... clear SENT_STALL ...\n"); - s3c2410_udc_clear_ep0_sst(base_addr); - dev->ep0state = EP0_IDLE; - return; - } - - /* clear setup end */ - if (ep0csr & S3C2410_UDC_EP0_CSR_SE) { - dprintk(DEBUG_NORMAL, "... serviced SETUP_END ...\n"); - s3c2410_udc_nuke(dev, ep, 0); - s3c2410_udc_clear_ep0_se(base_addr); - dev->ep0state = EP0_IDLE; - } - - switch (dev->ep0state) { - case EP0_IDLE: - s3c2410_udc_handle_ep0_idle(dev, ep, &crq, ep0csr); - break; - - case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ - dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n"); - if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) - s3c2410_udc_write_fifo(ep, req); - break; - - case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ - dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n"); - if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req) - s3c2410_udc_read_fifo(ep, req); - break; - - case EP0_END_XFER: - dprintk(DEBUG_NORMAL, "EP0_END_XFER ... what now?\n"); - dev->ep0state = EP0_IDLE; - break; - - case EP0_STALL: - dprintk(DEBUG_NORMAL, "EP0_STALL ... what now?\n"); - dev->ep0state = EP0_IDLE; - break; - } -} - -/* - * handle_ep - Manage I/O endpoints - */ - -static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) -{ - struct s3c2410_request *req; - int is_in = ep->bEndpointAddress & USB_DIR_IN; - u32 ep_csr1; - u32 idx; - - if (likely(!list_empty(&ep->queue))) - req = list_entry(ep->queue.next, - struct s3c2410_request, queue); - else - req = NULL; - - idx = ep->bEndpointAddress & 0x7F; - - if (is_in) { - udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); - dprintk(DEBUG_VERBOSE, "ep%01d write csr:%02x %d\n", - idx, ep_csr1, req ? 1 : 0); - - if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) { - dprintk(DEBUG_VERBOSE, "st\n"); - udc_write(idx, S3C2410_UDC_INDEX_REG); - udc_write(ep_csr1 & ~S3C2410_UDC_ICSR1_SENTSTL, - S3C2410_UDC_IN_CSR1_REG); - return; - } - - if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) - s3c2410_udc_write_fifo(ep, req); - } else { - udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG); - dprintk(DEBUG_VERBOSE, "ep%01d rd csr:%02x\n", idx, ep_csr1); - - if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) { - udc_write(idx, S3C2410_UDC_INDEX_REG); - udc_write(ep_csr1 & ~S3C2410_UDC_OCSR1_SENTSTL, - S3C2410_UDC_OUT_CSR1_REG); - return; - } - - if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) - s3c2410_udc_read_fifo(ep, req); - } -} - -/* - * s3c2410_udc_irq - interrupt handler - */ -static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) -{ - struct s3c2410_udc *dev = _dev; - int usb_status; - int usbd_status; - int pwr_reg; - int ep0csr; - int i; - u32 idx, idx2; - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - - /* Driver connected ? */ - if (!dev->driver) { - /* Clear interrupts */ - udc_write(udc_read(S3C2410_UDC_USB_INT_REG), - S3C2410_UDC_USB_INT_REG); - udc_write(udc_read(S3C2410_UDC_EP_INT_REG), - S3C2410_UDC_EP_INT_REG); - } - - /* Save index */ - idx = udc_read(S3C2410_UDC_INDEX_REG); - - /* Read status registers */ - usb_status = udc_read(S3C2410_UDC_USB_INT_REG); - usbd_status = udc_read(S3C2410_UDC_EP_INT_REG); - pwr_reg = udc_read(S3C2410_UDC_PWR_REG); - - udc_writeb(base_addr, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); - ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); - - dprintk(DEBUG_NORMAL, "usbs=%02x, usbds=%02x, pwr=%02x ep0csr=%02x\n", - usb_status, usbd_status, pwr_reg, ep0csr); - - /* - * Now, handle interrupts. There's two types : - * - Reset, Resume, Suspend coming -> usb_int_reg - * - EP -> ep_int_reg - */ - - /* RESET */ - if (usb_status & S3C2410_UDC_USBINT_RESET) { - /* two kind of reset : - * - reset start -> pwr reg = 8 - * - reset end -> pwr reg = 0 - **/ - dprintk(DEBUG_NORMAL, "USB reset csr %x pwr %x\n", - ep0csr, pwr_reg); - - dev->gadget.speed = USB_SPEED_UNKNOWN; - udc_write(0x00, S3C2410_UDC_INDEX_REG); - udc_write((dev->ep[0].ep.maxpacket & 0x7ff) >> 3, - S3C2410_UDC_MAXP_REG); - dev->address = 0; - - dev->ep0state = EP0_IDLE; - dev->gadget.speed = USB_SPEED_FULL; - - /* clear interrupt */ - udc_write(S3C2410_UDC_USBINT_RESET, - S3C2410_UDC_USB_INT_REG); - - udc_write(idx, S3C2410_UDC_INDEX_REG); - spin_unlock_irqrestore(&dev->lock, flags); - return IRQ_HANDLED; - } - - /* RESUME */ - if (usb_status & S3C2410_UDC_USBINT_RESUME) { - dprintk(DEBUG_NORMAL, "USB resume\n"); - - /* clear interrupt */ - udc_write(S3C2410_UDC_USBINT_RESUME, - S3C2410_UDC_USB_INT_REG); - - if (dev->gadget.speed != USB_SPEED_UNKNOWN - && dev->driver - && dev->driver->resume) - dev->driver->resume(&dev->gadget); - } - - /* SUSPEND */ - if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { - dprintk(DEBUG_NORMAL, "USB suspend\n"); - - /* clear interrupt */ - udc_write(S3C2410_UDC_USBINT_SUSPEND, - S3C2410_UDC_USB_INT_REG); - - if (dev->gadget.speed != USB_SPEED_UNKNOWN - && dev->driver - && dev->driver->suspend) - dev->driver->suspend(&dev->gadget); - - dev->ep0state = EP0_IDLE; - } - - /* EP */ - /* control traffic */ - /* check on ep0csr != 0 is not a good idea as clearing in_pkt_ready - * generate an interrupt - */ - if (usbd_status & S3C2410_UDC_INT_EP0) { - dprintk(DEBUG_VERBOSE, "USB ep0 irq\n"); - /* Clear the interrupt bit by setting it to 1 */ - udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); - s3c2410_udc_handle_ep0(dev); - } - - /* endpoint data transfers */ - for (i = 1; i < S3C2410_ENDPOINTS; i++) { - u32 tmp = 1 << i; - if (usbd_status & tmp) { - dprintk(DEBUG_VERBOSE, "USB ep%d irq\n", i); - - /* Clear the interrupt bit by setting it to 1 */ - udc_write(tmp, S3C2410_UDC_EP_INT_REG); - s3c2410_udc_handle_ep(&dev->ep[i]); - } - } - - /* what else causes this interrupt? a receive! who is it? */ - if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) { - for (i = 1; i < S3C2410_ENDPOINTS; i++) { - idx2 = udc_read(S3C2410_UDC_INDEX_REG); - udc_write(i, S3C2410_UDC_INDEX_REG); - - if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1) - s3c2410_udc_handle_ep(&dev->ep[i]); - - /* restore index */ - udc_write(idx2, S3C2410_UDC_INDEX_REG); - } - } - - dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd); - - /* Restore old index */ - udc_write(idx, S3C2410_UDC_INDEX_REG); - - spin_unlock_irqrestore(&dev->lock, flags); - - return IRQ_HANDLED; -} -/*------------------------- s3c2410_ep_ops ----------------------------------*/ - -static inline struct s3c2410_ep *to_s3c2410_ep(struct usb_ep *ep) -{ - return container_of(ep, struct s3c2410_ep, ep); -} - -static inline struct s3c2410_udc *to_s3c2410_udc(struct usb_gadget *gadget) -{ - return container_of(gadget, struct s3c2410_udc, gadget); -} - -static inline struct s3c2410_request *to_s3c2410_req(struct usb_request *req) -{ - return container_of(req, struct s3c2410_request, req); -} - -/* - * s3c2410_udc_ep_enable - */ -static int s3c2410_udc_ep_enable(struct usb_ep *_ep, - const struct usb_endpoint_descriptor *desc) -{ - struct s3c2410_udc *dev; - struct s3c2410_ep *ep; - u32 max, tmp; - unsigned long flags; - u32 csr1, csr2; - u32 int_en_reg; - - ep = to_s3c2410_ep(_ep); - - if (!_ep || !desc - || _ep->name == ep0name - || desc->bDescriptorType != USB_DT_ENDPOINT) - return -EINVAL; - - dev = ep->dev; - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) - return -ESHUTDOWN; - - max = usb_endpoint_maxp(desc); - - local_irq_save(flags); - _ep->maxpacket = max; - ep->ep.desc = desc; - ep->halted = 0; - ep->bEndpointAddress = desc->bEndpointAddress; - - /* set max packet */ - udc_write(ep->num, S3C2410_UDC_INDEX_REG); - udc_write(max >> 3, S3C2410_UDC_MAXP_REG); - - /* set type, direction, address; reset fifo counters */ - if (desc->bEndpointAddress & USB_DIR_IN) { - csr1 = S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT; - csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN; - - udc_write(ep->num, S3C2410_UDC_INDEX_REG); - udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); - udc_write(ep->num, S3C2410_UDC_INDEX_REG); - udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); - } else { - /* don't flush in fifo or it will cause endpoint interrupt */ - csr1 = S3C2410_UDC_ICSR1_CLRDT; - csr2 = S3C2410_UDC_ICSR2_DMAIEN; - - udc_write(ep->num, S3C2410_UDC_INDEX_REG); - udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); - udc_write(ep->num, S3C2410_UDC_INDEX_REG); - udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); - - csr1 = S3C2410_UDC_OCSR1_FFLUSH | S3C2410_UDC_OCSR1_CLRDT; - csr2 = S3C2410_UDC_OCSR2_DMAIEN; - - udc_write(ep->num, S3C2410_UDC_INDEX_REG); - udc_write(csr1, S3C2410_UDC_OUT_CSR1_REG); - udc_write(ep->num, S3C2410_UDC_INDEX_REG); - udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG); - } - - /* enable irqs */ - int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); - udc_write(int_en_reg | (1 << ep->num), S3C2410_UDC_EP_INT_EN_REG); - - /* print some debug message */ - tmp = desc->bEndpointAddress; - dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", - _ep->name, ep->num, tmp, - desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max); - - local_irq_restore(flags); - s3c2410_udc_set_halt(_ep, 0); - - return 0; -} - -/* - * s3c2410_udc_ep_disable - */ -static int s3c2410_udc_ep_disable(struct usb_ep *_ep) -{ - struct s3c2410_ep *ep = to_s3c2410_ep(_ep); - unsigned long flags; - u32 int_en_reg; - - if (!_ep || !ep->ep.desc) { - dprintk(DEBUG_NORMAL, "%s not enabled\n", - _ep ? ep->ep.name : NULL); - return -EINVAL; - } - - local_irq_save(flags); - - dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name); - - ep->ep.desc = NULL; - ep->halted = 1; - - s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN); - - /* disable irqs */ - int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); - udc_write(int_en_reg & ~(1<num), S3C2410_UDC_EP_INT_EN_REG); - - local_irq_restore(flags); - - dprintk(DEBUG_NORMAL, "%s disabled\n", _ep->name); - - return 0; -} - -/* - * s3c2410_udc_alloc_request - */ -static struct usb_request * -s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags) -{ - struct s3c2410_request *req; - - dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags); - - if (!_ep) - return NULL; - - req = kzalloc(sizeof(struct s3c2410_request), mem_flags); - if (!req) - return NULL; - - INIT_LIST_HEAD(&req->queue); - return &req->req; -} - -/* - * s3c2410_udc_free_request - */ -static void -s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) -{ - struct s3c2410_ep *ep = to_s3c2410_ep(_ep); - struct s3c2410_request *req = to_s3c2410_req(_req); - - dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); - - if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) - return; - - WARN_ON(!list_empty(&req->queue)); - kfree(req); -} - -/* - * s3c2410_udc_queue - */ -static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, - gfp_t gfp_flags) -{ - struct s3c2410_request *req = to_s3c2410_req(_req); - struct s3c2410_ep *ep = to_s3c2410_ep(_ep); - struct s3c2410_udc *dev; - u32 ep_csr = 0; - int fifo_count = 0; - unsigned long flags; - - if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { - dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__); - return -EINVAL; - } - - dev = ep->dev; - if (unlikely(!dev->driver - || dev->gadget.speed == USB_SPEED_UNKNOWN)) { - return -ESHUTDOWN; - } - - local_irq_save(flags); - - if (unlikely(!_req || !_req->complete - || !_req->buf || !list_empty(&req->queue))) { - if (!_req) - dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__); - else { - dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n", - __func__, !_req->complete, !_req->buf, - !list_empty(&req->queue)); - } - - local_irq_restore(flags); - return -EINVAL; - } - - _req->status = -EINPROGRESS; - _req->actual = 0; - - dprintk(DEBUG_VERBOSE, "%s: ep%x len %d\n", - __func__, ep->bEndpointAddress, _req->length); - - if (ep->bEndpointAddress) { - udc_write(ep->bEndpointAddress & 0x7F, S3C2410_UDC_INDEX_REG); - - ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) - ? S3C2410_UDC_IN_CSR1_REG - : S3C2410_UDC_OUT_CSR1_REG); - fifo_count = s3c2410_udc_fifo_count_out(); - } else { - udc_write(0, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); - fifo_count = s3c2410_udc_fifo_count_out(); - } - - /* kickstart this i/o queue? */ - if (list_empty(&ep->queue) && !ep->halted) { - if (ep->bEndpointAddress == 0 /* ep0 */) { - switch (dev->ep0state) { - case EP0_IN_DATA_PHASE: - if (!(ep_csr&S3C2410_UDC_EP0_CSR_IPKRDY) - && s3c2410_udc_write_fifo(ep, - req)) { - dev->ep0state = EP0_IDLE; - req = NULL; - } - break; - - case EP0_OUT_DATA_PHASE: - if ((!_req->length) - || ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) - && s3c2410_udc_read_fifo(ep, - req))) { - dev->ep0state = EP0_IDLE; - req = NULL; - } - break; - - default: - local_irq_restore(flags); - return -EL2HLT; - } - } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0 - && (!(ep_csr&S3C2410_UDC_OCSR1_PKTRDY)) - && s3c2410_udc_write_fifo(ep, req)) { - req = NULL; - } else if ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) - && fifo_count - && s3c2410_udc_read_fifo(ep, req)) { - req = NULL; - } - } - - /* pio or dma irq handler advances the queue. */ - if (likely(req)) - list_add_tail(&req->queue, &ep->queue); - - local_irq_restore(flags); - - dprintk(DEBUG_VERBOSE, "%s ok\n", __func__); - return 0; -} - -/* - * s3c2410_udc_dequeue - */ -static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) -{ - struct s3c2410_ep *ep = to_s3c2410_ep(_ep); - int retval = -EINVAL; - unsigned long flags; - struct s3c2410_request *req = NULL, *iter; - - dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); - - if (!the_controller->driver) - return -ESHUTDOWN; - - if (!_ep || !_req) - return retval; - - local_irq_save(flags); - - list_for_each_entry(iter, &ep->queue, queue) { - if (&iter->req != _req) - continue; - list_del_init(&iter->queue); - _req->status = -ECONNRESET; - req = iter; - retval = 0; - break; - } - - if (retval == 0) { - dprintk(DEBUG_VERBOSE, - "dequeued req %p from %s, len %d buf %p\n", - req, _ep->name, _req->length, _req->buf); - - s3c2410_udc_done(ep, req, -ECONNRESET); - } - - local_irq_restore(flags); - return retval; -} - -/* - * s3c2410_udc_set_halt - */ -static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) -{ - struct s3c2410_ep *ep = to_s3c2410_ep(_ep); - u32 ep_csr = 0; - unsigned long flags; - u32 idx; - - if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { - dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__); - return -EINVAL; - } - - local_irq_save(flags); - - idx = ep->bEndpointAddress & 0x7F; - - if (idx == 0) { - s3c2410_udc_set_ep0_ss(base_addr); - s3c2410_udc_set_ep0_de_out(base_addr); - } else { - udc_write(idx, S3C2410_UDC_INDEX_REG); - ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) - ? S3C2410_UDC_IN_CSR1_REG - : S3C2410_UDC_OUT_CSR1_REG); - - if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { - if (value) - udc_write(ep_csr | S3C2410_UDC_ICSR1_SENDSTL, - S3C2410_UDC_IN_CSR1_REG); - else { - ep_csr &= ~S3C2410_UDC_ICSR1_SENDSTL; - udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); - ep_csr |= S3C2410_UDC_ICSR1_CLRDT; - udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); - } - } else { - if (value) - udc_write(ep_csr | S3C2410_UDC_OCSR1_SENDSTL, - S3C2410_UDC_OUT_CSR1_REG); - else { - ep_csr &= ~S3C2410_UDC_OCSR1_SENDSTL; - udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); - ep_csr |= S3C2410_UDC_OCSR1_CLRDT; - udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); - } - } - } - - ep->halted = value ? 1 : 0; - local_irq_restore(flags); - - return 0; -} - -static const struct usb_ep_ops s3c2410_ep_ops = { - .enable = s3c2410_udc_ep_enable, - .disable = s3c2410_udc_ep_disable, - - .alloc_request = s3c2410_udc_alloc_request, - .free_request = s3c2410_udc_free_request, - - .queue = s3c2410_udc_queue, - .dequeue = s3c2410_udc_dequeue, - - .set_halt = s3c2410_udc_set_halt, -}; - -/*------------------------- usb_gadget_ops ----------------------------------*/ - -/* - * s3c2410_udc_get_frame - */ -static int s3c2410_udc_get_frame(struct usb_gadget *_gadget) -{ - int tmp; - - dprintk(DEBUG_VERBOSE, "%s()\n", __func__); - - tmp = udc_read(S3C2410_UDC_FRAME_NUM2_REG) << 8; - tmp |= udc_read(S3C2410_UDC_FRAME_NUM1_REG); - return tmp; -} - -/* - * s3c2410_udc_wakeup - */ -static int s3c2410_udc_wakeup(struct usb_gadget *_gadget) -{ - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - return 0; -} - -/* - * s3c2410_udc_set_selfpowered - */ -static int s3c2410_udc_set_selfpowered(struct usb_gadget *gadget, int value) -{ - struct s3c2410_udc *udc = to_s3c2410_udc(gadget); - - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - - gadget->is_selfpowered = (value != 0); - if (value) - udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED); - else - udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); - - return 0; -} - -static void s3c2410_udc_disable(struct s3c2410_udc *dev); -static void s3c2410_udc_enable(struct s3c2410_udc *dev); - -static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) -{ - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - - if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) { - - if (is_on) - s3c2410_udc_enable(udc); - else { - if (udc->gadget.speed != USB_SPEED_UNKNOWN) { - if (udc->driver && udc->driver->disconnect) - udc->driver->disconnect(&udc->gadget); - - } - s3c2410_udc_disable(udc); - } - } else { - return -EOPNOTSUPP; - } - - return 0; -} - -static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active) -{ - struct s3c2410_udc *udc = to_s3c2410_udc(gadget); - - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - - udc->vbus = (is_active != 0); - s3c2410_udc_set_pullup(udc, is_active); - return 0; -} - -static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on) -{ - struct s3c2410_udc *udc = to_s3c2410_udc(gadget); - - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - - s3c2410_udc_set_pullup(udc, is_on); - return 0; -} - -static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) -{ - struct s3c2410_udc *dev = _dev; - unsigned int value; - - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - - value = gpiod_get_value(dev->vbus_gpiod); - - if (value != dev->vbus) - s3c2410_udc_vbus_session(&dev->gadget, value); - - return IRQ_HANDLED; -} - -static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) -{ - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - - if (udc_info && udc_info->vbus_draw) { - udc_info->vbus_draw(ma); - return 0; - } - - return -ENOTSUPP; -} - -static int s3c2410_udc_start(struct usb_gadget *g, - struct usb_gadget_driver *driver); -static int s3c2410_udc_stop(struct usb_gadget *g); - -static const struct usb_gadget_ops s3c2410_ops = { - .get_frame = s3c2410_udc_get_frame, - .wakeup = s3c2410_udc_wakeup, - .set_selfpowered = s3c2410_udc_set_selfpowered, - .pullup = s3c2410_udc_pullup, - .vbus_session = s3c2410_udc_vbus_session, - .vbus_draw = s3c2410_vbus_draw, - .udc_start = s3c2410_udc_start, - .udc_stop = s3c2410_udc_stop, -}; - -static void s3c2410_udc_command(struct s3c2410_udc *udc, - enum s3c2410_udc_cmd_e cmd) -{ - if (!udc_info) - return; - - if (udc_info->udc_command) { - udc_info->udc_command(cmd); - } else if (udc->pullup_gpiod) { - int value; - - switch (cmd) { - case S3C2410_UDC_P_ENABLE: - value = 1; - break; - case S3C2410_UDC_P_DISABLE: - value = 0; - break; - default: - return; - } - - gpiod_set_value(udc->pullup_gpiod, value); - } -} - -/*------------------------- gadget driver handling---------------------------*/ -/* - * s3c2410_udc_disable - */ -static void s3c2410_udc_disable(struct s3c2410_udc *dev) -{ - dprintk(DEBUG_NORMAL, "%s()\n", __func__); - - /* Disable all interrupts */ - udc_write(0x00, S3C2410_UDC_USB_INT_EN_REG); - udc_write(0x00, S3C2410_UDC_EP_INT_EN_REG); - - /* Clear the interrupt registers */ - udc_write(S3C2410_UDC_USBINT_RESET - | S3C2410_UDC_USBINT_RESUME - | S3C2410_UDC_USBINT_SUSPEND, - S3C2410_UDC_USB_INT_REG); - - udc_write(0x1F, S3C2410_UDC_EP_INT_REG); - - /* Good bye, cruel world */ - s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE); - - /* Set speed to unknown */ - dev->gadget.speed = USB_SPEED_UNKNOWN; -} - -/* - * s3c2410_udc_reinit - */ -static void s3c2410_udc_reinit(struct s3c2410_udc *dev) -{ - u32 i; - - /* device/ep0 records init */ - INIT_LIST_HEAD(&dev->gadget.ep_list); - INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); - dev->ep0state = EP0_IDLE; - - for (i = 0; i < S3C2410_ENDPOINTS; i++) { - struct s3c2410_ep *ep = &dev->ep[i]; - - if (i != 0) - list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); - - ep->dev = dev; - ep->ep.desc = NULL; - ep->halted = 0; - INIT_LIST_HEAD(&ep->queue); - usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket); - } -} - -/* - * s3c2410_udc_enable - */ -static void s3c2410_udc_enable(struct s3c2410_udc *dev) -{ - int i; - - dprintk(DEBUG_NORMAL, "s3c2410_udc_enable called\n"); - - /* dev->gadget.speed = USB_SPEED_UNKNOWN; */ - dev->gadget.speed = USB_SPEED_FULL; - - /* Set MAXP for all endpoints */ - for (i = 0; i < S3C2410_ENDPOINTS; i++) { - udc_write(i, S3C2410_UDC_INDEX_REG); - udc_write((dev->ep[i].ep.maxpacket & 0x7ff) >> 3, - S3C2410_UDC_MAXP_REG); - } - - /* Set default power state */ - udc_write(DEFAULT_POWER_STATE, S3C2410_UDC_PWR_REG); - - /* Enable reset and suspend interrupt interrupts */ - udc_write(S3C2410_UDC_USBINT_RESET | S3C2410_UDC_USBINT_SUSPEND, - S3C2410_UDC_USB_INT_EN_REG); - - /* Enable ep0 interrupt */ - udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); - - /* time to say "hello, world" */ - s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE); -} - -static int s3c2410_udc_start(struct usb_gadget *g, - struct usb_gadget_driver *driver) -{ - struct s3c2410_udc *udc = to_s3c2410(g); - - dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name); - - /* Hook the driver */ - udc->driver = driver; - - /* Enable udc */ - s3c2410_udc_enable(udc); - - return 0; -} - -static int s3c2410_udc_stop(struct usb_gadget *g) -{ - struct s3c2410_udc *udc = to_s3c2410(g); - - udc->driver = NULL; - - /* Disable udc */ - s3c2410_udc_disable(udc); - - return 0; -} - -/*---------------------------------------------------------------------------*/ -static struct s3c2410_udc memory = { - .gadget = { - .ops = &s3c2410_ops, - .ep0 = &memory.ep[0].ep, - .name = gadget_name, - .dev = { - .init_name = "gadget", - }, - }, - - /* control endpoint */ - .ep[0] = { - .num = 0, - .ep = { - .name = ep0name, - .ops = &s3c2410_ep_ops, - .maxpacket = EP0_FIFO_SIZE, - .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, - USB_EP_CAPS_DIR_ALL), - }, - .dev = &memory, - }, - - /* first group of endpoints */ - .ep[1] = { - .num = 1, - .ep = { - .name = "ep1-bulk", - .ops = &s3c2410_ep_ops, - .maxpacket = EP_FIFO_SIZE, - .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, - USB_EP_CAPS_DIR_ALL), - }, - .dev = &memory, - .fifo_size = EP_FIFO_SIZE, - .bEndpointAddress = 1, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - }, - .ep[2] = { - .num = 2, - .ep = { - .name = "ep2-bulk", - .ops = &s3c2410_ep_ops, - .maxpacket = EP_FIFO_SIZE, - .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, - USB_EP_CAPS_DIR_ALL), - }, - .dev = &memory, - .fifo_size = EP_FIFO_SIZE, - .bEndpointAddress = 2, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - }, - .ep[3] = { - .num = 3, - .ep = { - .name = "ep3-bulk", - .ops = &s3c2410_ep_ops, - .maxpacket = EP_FIFO_SIZE, - .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, - USB_EP_CAPS_DIR_ALL), - }, - .dev = &memory, - .fifo_size = EP_FIFO_SIZE, - .bEndpointAddress = 3, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - }, - .ep[4] = { - .num = 4, - .ep = { - .name = "ep4-bulk", - .ops = &s3c2410_ep_ops, - .maxpacket = EP_FIFO_SIZE, - .caps = USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, - USB_EP_CAPS_DIR_ALL), - }, - .dev = &memory, - .fifo_size = EP_FIFO_SIZE, - .bEndpointAddress = 4, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - } - -}; - -/* - * probe - binds to the platform device - */ -static int s3c2410_udc_probe(struct platform_device *pdev) -{ - struct s3c2410_udc *udc = &memory; - struct device *dev = &pdev->dev; - int retval; - int irq; - - dev_dbg(dev, "%s()\n", __func__); - - usb_bus_clock = clk_get(NULL, "usb-bus-gadget"); - if (IS_ERR(usb_bus_clock)) { - dev_err(dev, "failed to get usb bus clock source\n"); - return PTR_ERR(usb_bus_clock); - } - - clk_prepare_enable(usb_bus_clock); - - udc_clock = clk_get(NULL, "usb-device"); - if (IS_ERR(udc_clock)) { - dev_err(dev, "failed to get udc clock source\n"); - retval = PTR_ERR(udc_clock); - goto err_usb_bus_clk; - } - - clk_prepare_enable(udc_clock); - - mdelay(10); - - dev_dbg(dev, "got and enabled clocks\n"); - - if (strncmp(pdev->name, "s3c2440", 7) == 0) { - dev_info(dev, "S3C2440: increasing FIFO to 128 bytes\n"); - memory.ep[1].fifo_size = S3C2440_EP_FIFO_SIZE; - memory.ep[2].fifo_size = S3C2440_EP_FIFO_SIZE; - memory.ep[3].fifo_size = S3C2440_EP_FIFO_SIZE; - memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE; - } - - spin_lock_init(&udc->lock); - udc_info = dev_get_platdata(&pdev->dev); - - base_addr = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(base_addr)) { - retval = PTR_ERR(base_addr); - goto err_udc_clk; - } - - the_controller = udc; - platform_set_drvdata(pdev, udc); - - s3c2410_udc_disable(udc); - s3c2410_udc_reinit(udc); - - irq_usbd = platform_get_irq(pdev, 0); - if (irq_usbd < 0) { - retval = irq_usbd; - goto err_udc_clk; - } - - /* irq setup after old hardware state is cleaned up */ - retval = request_irq(irq_usbd, s3c2410_udc_irq, - 0, gadget_name, udc); - - if (retval != 0) { - dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval); - retval = -EBUSY; - goto err_udc_clk; - } - - dev_dbg(dev, "got irq %i\n", irq_usbd); - - udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN); - if (IS_ERR(udc->vbus_gpiod)) { - retval = PTR_ERR(udc->vbus_gpiod); - goto err_int; - } - if (udc->vbus_gpiod) { - gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus"); - - irq = gpiod_to_irq(udc->vbus_gpiod); - if (irq < 0) { - dev_err(dev, "no irq for gpio vbus pin\n"); - retval = irq; - goto err_gpio_claim; - } - - retval = request_irq(irq, s3c2410_udc_vbus_irq, - IRQF_TRIGGER_RISING - | IRQF_TRIGGER_FALLING | IRQF_SHARED, - gadget_name, udc); - - if (retval != 0) { - dev_err(dev, "can't get vbus irq %d, err %d\n", - irq, retval); - retval = -EBUSY; - goto err_gpio_claim; - } - - dev_dbg(dev, "got irq %i\n", irq); - } else { - udc->vbus = 1; - } - - udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW); - if (IS_ERR(udc->pullup_gpiod)) { - retval = PTR_ERR(udc->pullup_gpiod); - goto err_vbus_irq; - } - gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup"); - - retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); - if (retval) - goto err_add_udc; - - debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, udc, - &s3c2410_udc_debugfs_fops); - - dev_dbg(dev, "probe ok\n"); - - return 0; - -err_add_udc: -err_vbus_irq: - if (udc->vbus_gpiod) - free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); -err_gpio_claim: -err_int: - free_irq(irq_usbd, udc); -err_udc_clk: - clk_disable_unprepare(udc_clock); - clk_put(udc_clock); - udc_clock = NULL; -err_usb_bus_clk: - clk_disable_unprepare(usb_bus_clock); - clk_put(usb_bus_clock); - usb_bus_clock = NULL; - - return retval; -} - -/* - * s3c2410_udc_remove - */ -static int s3c2410_udc_remove(struct platform_device *pdev) -{ - struct s3c2410_udc *udc = platform_get_drvdata(pdev); - - dev_dbg(&pdev->dev, "%s()\n", __func__); - - if (udc->driver) - return -EBUSY; - - usb_del_gadget_udc(&udc->gadget); - debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root)); - - if (udc->vbus_gpiod) - free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); - - free_irq(irq_usbd, udc); - - if (!IS_ERR(udc_clock) && udc_clock != NULL) { - clk_disable_unprepare(udc_clock); - clk_put(udc_clock); - udc_clock = NULL; - } - - if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) { - clk_disable_unprepare(usb_bus_clock); - clk_put(usb_bus_clock); - usb_bus_clock = NULL; - } - - dev_dbg(&pdev->dev, "%s: remove ok\n", __func__); - return 0; -} - -#ifdef CONFIG_PM -static int -s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) -{ - struct s3c2410_udc *udc = platform_get_drvdata(pdev); - - s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE); - - return 0; -} - -static int s3c2410_udc_resume(struct platform_device *pdev) -{ - struct s3c2410_udc *udc = platform_get_drvdata(pdev); - - s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE); - - return 0; -} -#else -#define s3c2410_udc_suspend NULL -#define s3c2410_udc_resume NULL -#endif - -static const struct platform_device_id s3c_udc_ids[] = { - { "s3c2410-usbgadget", }, - { "s3c2440-usbgadget", }, - { } -}; -MODULE_DEVICE_TABLE(platform, s3c_udc_ids); - -static struct platform_driver udc_driver_24x0 = { - .driver = { - .name = "s3c24x0-usbgadget", - }, - .probe = s3c2410_udc_probe, - .remove = s3c2410_udc_remove, - .suspend = s3c2410_udc_suspend, - .resume = s3c2410_udc_resume, - .id_table = s3c_udc_ids, -}; - -static int __init udc_init(void) -{ - int retval; - - dprintk(DEBUG_NORMAL, "%s\n", gadget_name); - - s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, - usb_debug_root); - - retval = platform_driver_register(&udc_driver_24x0); - if (retval) - goto err; - - return 0; - -err: - debugfs_remove(s3c2410_udc_debugfs_root); - return retval; -} - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver_24x0); - debugfs_remove_recursive(s3c2410_udc_debugfs_root); -} - -module_init(udc_init); -module_exit(udc_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h deleted file mode 100644 index cdbf202..0000000 --- a/drivers/usb/gadget/udc/s3c2410_udc.h +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * linux/drivers/usb/gadget/s3c2410_udc.h - * Samsung on-chip full speed USB device controllers - * - * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard - * Additional cleanups by Ben Dooks - */ - -#ifndef _S3C2410_UDC_H -#define _S3C2410_UDC_H - -struct s3c2410_ep { - struct list_head queue; - unsigned long last_io; /* jiffies timestamp */ - struct usb_gadget *gadget; - struct s3c2410_udc *dev; - struct usb_ep ep; - u8 num; - - unsigned short fifo_size; - u8 bEndpointAddress; - u8 bmAttributes; - - unsigned halted : 1; - unsigned already_seen : 1; - unsigned setup_stage : 1; -}; - - -/* Warning : ep0 has a fifo of 16 bytes */ -/* Don't try to set 32 or 64 */ -/* also testusb 14 fails wit 16 but is */ -/* fine with 8 */ -#define EP0_FIFO_SIZE 8 -#define EP_FIFO_SIZE 64 -#define DEFAULT_POWER_STATE 0x00 - -#define S3C2440_EP_FIFO_SIZE 128 - -static const char ep0name [] = "ep0"; - -static const char *const ep_name[] = { - ep0name, /* everyone has ep0 */ - /* s3c2410 four bidirectional bulk endpoints */ - "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk", -}; - -#define S3C2410_ENDPOINTS ARRAY_SIZE(ep_name) - -struct s3c2410_request { - struct list_head queue; /* ep's requests */ - struct usb_request req; -}; - -enum ep0_state { - EP0_IDLE, - EP0_IN_DATA_PHASE, - EP0_OUT_DATA_PHASE, - EP0_END_XFER, - EP0_STALL, -}; - -static const char *ep0states[]= { - "EP0_IDLE", - "EP0_IN_DATA_PHASE", - "EP0_OUT_DATA_PHASE", - "EP0_END_XFER", - "EP0_STALL", -}; - -struct s3c2410_udc { - spinlock_t lock; - - struct s3c2410_ep ep[S3C2410_ENDPOINTS]; - int address; - struct usb_gadget gadget; - struct usb_gadget_driver *driver; - struct s3c2410_request fifo_req; - u8 fifo_buf[EP_FIFO_SIZE]; - u16 devstatus; - - u32 port_status; - int ep0state; - - struct gpio_desc *vbus_gpiod; - struct gpio_desc *pullup_gpiod; - - unsigned got_irq : 1; - - unsigned req_std : 1; - unsigned req_config : 1; - unsigned req_pending : 1; - u8 vbus; - int irq; -}; -#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget)) - -#endif diff --git a/drivers/usb/gadget/udc/s3c2410_udc_regs.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h deleted file mode 100644 index d8d2eea..0000000 --- a/drivers/usb/gadget/udc/s3c2410_udc_regs.h +++ /dev/null @@ -1,146 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2004 Herbert Poetzl - */ - -#ifndef __ASM_ARCH_REGS_UDC_H -#define __ASM_ARCH_REGS_UDC_H - -#define S3C2410_USBDREG(x) (x) - -#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) -#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) -#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) - -#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) -#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) - -#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) - -#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) -#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) - -#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) -#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) -#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) -#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) -#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) - -#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) -#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) -#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) -#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) -#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) -#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) - -#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) -#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) -#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) -#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) -#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) -#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) - -#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) -#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) -#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) -#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) -#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) -#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) - -#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) -#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) -#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) -#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) -#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) -#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) - -#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) - -/* indexed registers */ - -#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) - -#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) - -#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) -#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) - -#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) -#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) -#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) -#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) - -#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7) - -#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */ -#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */ -#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */ -#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */ -#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */ - -#define S3C2410_UDC_PWR_DEFAULT (0x00) - -#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */ -#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */ -#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */ -#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */ -#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */ - -#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */ -#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */ -#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */ - -#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */ -#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */ -#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */ -#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */ -#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */ - -#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */ -#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */ - -#define S3C2410_UDC_INDEX_EP0 (0x00) -#define S3C2410_UDC_INDEX_EP1 (0x01) -#define S3C2410_UDC_INDEX_EP2 (0x02) -#define S3C2410_UDC_INDEX_EP3 (0x03) -#define S3C2410_UDC_INDEX_EP4 (0x04) - -#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */ -#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */ -#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */ -#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */ -#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */ -#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */ - -#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */ -#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */ -#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */ -#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */ - -#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */ -#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */ -#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */ -#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */ -#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */ -#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */ -#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */ - -#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */ -#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */ -#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */ - -#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0) -#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1) -#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2) -#define S3C2410_UDC_EP0_CSR_DE (1 << 3) -#define S3C2410_UDC_EP0_CSR_SE (1 << 4) -#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5) -#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6) -#define S3C2410_UDC_EP0_CSR_SSE (1 << 7) - -#define S3C2410_UDC_MAXP_8 (1 << 0) -#define S3C2410_UDC_MAXP_16 (1 << 1) -#define S3C2410_UDC_MAXP_32 (1 << 2) -#define S3C2410_UDC_MAXP_64 (1 << 3) - -#endif diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h deleted file mode 100644 index a170939..0000000 --- a/include/linux/platform_data/s3c-hsudc.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * S3C24XX USB 2.0 High-speed USB controller gadget driver - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. - * Each endpoint can be configured as either in or out endpoint. Endpoints - * can be configured for Bulk or Interrupt transfer mode. -*/ - -#ifndef __LINUX_USB_S3C_HSUDC_H -#define __LINUX_USB_S3C_HSUDC_H - -/** - * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. - * @epnum: Number of endpoints to be instantiated by the controller driver. - * @gpio_init: Platform specific USB related GPIO initialization. - * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. - * - * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget - * controllers. - */ -struct s3c24xx_hsudc_platdata { - unsigned int epnum; - void (*gpio_init)(void); - void (*gpio_uninit)(void); - void (*phy_init)(void); - void (*phy_uninit)(void); -}; - -#endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h deleted file mode 100644 index c0fbe1f..0000000 --- a/include/linux/platform_data/usb-s3c2410_udc.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* arch/arm/plat-samsung/include/plat/udc.h - * - * Copyright (c) 2005 Arnaud Patard - * - * Changelog: - * 14-Mar-2005 RTP Created file - * 02-Aug-2005 RTP File rename - * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum - * 18-Jan-2007 HMW Add per-platform vbus_draw function -*/ - -#ifndef __ASM_ARM_ARCH_UDC_H -#define __ASM_ARM_ARCH_UDC_H - -enum s3c2410_udc_cmd_e { - S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ - S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ - S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ -}; - -struct s3c2410_udc_mach_info { - void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); -}; - -extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); - -struct s3c24xx_hsudc_platdata; - -extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); - -#endif /* __ASM_ARM_ARCH_UDC_H */