From: Viresh Kumar Date: Mon, 4 Jul 2022 09:27:06 +0000 (+0530) Subject: OPP: Remove custom OPP helper support X-Git-Tag: v6.1-rc5~649^2~1^2^2~20 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=1f378c6ead5c69decf36e8e61de2e50377c76ab8;p=platform%2Fkernel%2Flinux-starfive.git OPP: Remove custom OPP helper support The only user of the custom helper is migrated to use dev_pm_opp_set_config_regulators() interface. Remove the now unused custom OPP helper support. This cleans up _set_opp() and leaves a single code path to be used by all users. Tested-by: Dmitry Osipenko Signed-off-by: Viresh Kumar --- diff --git a/drivers/opp/core.c b/drivers/opp/core.c index 3a794bf..e74bdc1 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -979,36 +979,6 @@ static int _set_opp_bw(const struct opp_table *opp_table, return 0; } -static int _set_opp_custom(const struct opp_table *opp_table, - struct device *dev, struct dev_pm_opp *opp, - unsigned long freq) -{ - struct dev_pm_set_opp_data *data = opp_table->set_opp_data; - struct dev_pm_opp *old_opp = opp_table->current_opp; - int size; - - /* - * We support this only if dev_pm_opp_set_config() was called - * earlier to set regulators. - */ - if (opp_table->sod_supplies) { - size = sizeof(*old_opp->supplies) * opp_table->regulator_count; - memcpy(data->old_opp.supplies, old_opp->supplies, size); - memcpy(data->new_opp.supplies, opp->supplies, size); - data->regulator_count = opp_table->regulator_count; - } else { - data->regulator_count = 0; - } - - data->regulators = opp_table->regulators; - data->clk = opp_table->clk; - data->dev = dev; - data->old_opp.rate = old_opp->rate; - data->new_opp.rate = freq; - - return opp_table->set_opp(data); -} - static int _set_required_opp(struct device *dev, struct device *pd_dev, struct dev_pm_opp *opp, int i) { @@ -1195,13 +1165,7 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table, } } - if (opp_table->set_opp) { - ret = _set_opp_custom(opp_table, dev, opp, freq); - } else { - /* Only frequency scaling */ - ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq); - } - + ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq); if (ret) return ret; @@ -2065,7 +2029,6 @@ static void _opp_put_prop_name(struct opp_table *opp_table) static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev, const char * const names[]) { - struct dev_pm_opp_supply *supplies; const char * const *temp = names; struct regulator *reg; int count = 0, ret, i; @@ -2101,20 +2064,6 @@ static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev, opp_table->regulator_count = count; - supplies = kmalloc_array(count * 2, sizeof(*supplies), GFP_KERNEL); - if (!supplies) { - ret = -ENOMEM; - goto free_regulators; - } - - mutex_lock(&opp_table->lock); - opp_table->sod_supplies = supplies; - if (opp_table->set_opp_data) { - opp_table->set_opp_data->old_opp.supplies = supplies; - opp_table->set_opp_data->new_opp.supplies = supplies + count; - } - mutex_unlock(&opp_table->lock); - /* Set generic config_regulators() for single regulators here */ if (count == 1) opp_table->config_regulators = _opp_config_regulator_single; @@ -2151,16 +2100,6 @@ static void _opp_put_regulators(struct opp_table *opp_table) for (i = opp_table->regulator_count - 1; i >= 0; i--) regulator_put(opp_table->regulators[i]); - mutex_lock(&opp_table->lock); - if (opp_table->set_opp_data) { - opp_table->set_opp_data->old_opp.supplies = NULL; - opp_table->set_opp_data->new_opp.supplies = NULL; - } - - kfree(opp_table->sod_supplies); - opp_table->sod_supplies = NULL; - mutex_unlock(&opp_table->lock); - kfree(opp_table->regulators); opp_table->regulators = NULL; opp_table->regulator_count = -1; @@ -2234,61 +2173,6 @@ static void _opp_put_clknames(struct opp_table *opp_table) } /** - * _opp_register_set_opp_helper() - Register custom set OPP helper - * @dev: Device for which the helper is getting registered. - * @set_opp: Custom set OPP helper. - * - * This is useful to support complex platforms (like platforms with multiple - * regulators per device), instead of the generic OPP set rate helper. - * - * This must be called before any OPPs are initialized for the device. - */ -static int _opp_register_set_opp_helper(struct opp_table *opp_table, - struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)) -{ - struct dev_pm_set_opp_data *data; - - /* Another CPU that shares the OPP table has set the helper ? */ - if (opp_table->set_opp) - return 0; - - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - mutex_lock(&opp_table->lock); - opp_table->set_opp_data = data; - if (opp_table->sod_supplies) { - data->old_opp.supplies = opp_table->sod_supplies; - data->new_opp.supplies = opp_table->sod_supplies + - opp_table->regulator_count; - } - mutex_unlock(&opp_table->lock); - - opp_table->set_opp = set_opp; - - return 0; -} - -/** - * _opp_unregister_set_opp_helper() - Releases resources blocked for set_opp helper - * @opp_table: OPP table returned from _opp_register_set_opp_helper(). - * - * Release resources blocked for platform specific set_opp helper. - */ -static void _opp_unregister_set_opp_helper(struct opp_table *opp_table) -{ - if (opp_table->set_opp) { - opp_table->set_opp = NULL; - - mutex_lock(&opp_table->lock); - kfree(opp_table->set_opp_data); - opp_table->set_opp_data = NULL; - mutex_unlock(&opp_table->lock); - } -} - -/** * _opp_set_config_regulators_helper() - Register custom set regulator helper. * @dev: Device for which the helper is getting registered. * @config_regulators: Custom set regulator helper. @@ -2446,10 +2330,8 @@ static void _opp_clear_config(struct opp_config_data *data) _opp_put_regulators(data->opp_table); if (data->flags & OPP_CONFIG_SUPPORTED_HW) _opp_put_supported_hw(data->opp_table); - if (data->flags & OPP_CONFIG_REGULATOR_HELPER) { + if (data->flags & OPP_CONFIG_REGULATOR_HELPER) _opp_put_config_regulators_helper(data->opp_table); - _opp_unregister_set_opp_helper(data->opp_table); - } if (data->flags & OPP_CONFIG_PROP_NAME) _opp_put_prop_name(data->opp_table); if (data->flags & OPP_CONFIG_CLK) @@ -2520,16 +2402,6 @@ int dev_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config) data->flags |= OPP_CONFIG_PROP_NAME; } - /* Configure opp helper */ - if (config->set_opp) { - ret = _opp_register_set_opp_helper(opp_table, dev, - config->set_opp); - if (ret) - goto err; - - data->flags |= OPP_CONFIG_REGULATOR_HELPER; - } - /* Configure config_regulators helper */ if (config->config_regulators) { ret = _opp_set_config_regulators_helper(opp_table, dev, diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h index 45fd407..13abe99 100644 --- a/drivers/opp/opp.h +++ b/drivers/opp/opp.h @@ -182,9 +182,6 @@ enum opp_table_access { * @enabled: Set to true if the device's resources are enabled/configured. * @genpd_performance_state: Device's power domain support performance state. * @is_genpd: Marks if the OPP table belongs to a genpd. - * @set_opp: Platform specific set_opp callback - * @sod_supplies: Set opp data supplies - * @set_opp_data: Data to be passed to set_opp callback * @dentry: debugfs dentry pointer of the real device directory (not links). * @dentry_name: Name of the real dentry. * @@ -234,10 +231,6 @@ struct opp_table { bool genpd_performance_state; bool is_genpd; - int (*set_opp)(struct dev_pm_set_opp_data *data); - struct dev_pm_opp_supply *sod_supplies; - struct dev_pm_set_opp_data *set_opp_data; - #ifdef CONFIG_DEBUG_FS struct dentry *dentry; char dentry_name[NAME_MAX]; diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 1e2b33d..9d59aed 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -57,39 +57,6 @@ struct dev_pm_opp_icc_bw { u32 peak; }; -/** - * struct dev_pm_opp_info - OPP freq/voltage/current values - * @rate: Target clk rate in hz - * @supplies: Array of voltage/current values for all power supplies - * - * This structure stores the freq/voltage/current values for a single OPP. - */ -struct dev_pm_opp_info { - unsigned long rate; - struct dev_pm_opp_supply *supplies; -}; - -/** - * struct dev_pm_set_opp_data - Set OPP data - * @old_opp: Old OPP info - * @new_opp: New OPP info - * @regulators: Array of regulator pointers - * @regulator_count: Number of regulators - * @clk: Pointer to clk - * @dev: Pointer to the struct device - * - * This structure contains all information required for setting an OPP. - */ -struct dev_pm_set_opp_data { - struct dev_pm_opp_info old_opp; - struct dev_pm_opp_info new_opp; - - struct regulator **regulators; - unsigned int regulator_count; - struct clk *clk; - struct device *dev; -}; - typedef int (*config_regulators_t)(struct device *dev, struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp, struct regulator **regulators, unsigned int count); @@ -98,7 +65,6 @@ typedef int (*config_regulators_t)(struct device *dev, * struct dev_pm_opp_config - Device OPP configuration values * @clk_names: Clk names, NULL terminated array, max 1 clock for now. * @prop_name: Name to postfix to properties. - * @set_opp: Custom set OPP helper. * @config_regulators: Custom set regulator helper. * @supported_hw: Array of hierarchy of versions to match. * @supported_hw_count: Number of elements in the array. @@ -113,7 +79,6 @@ struct dev_pm_opp_config { /* NULL terminated */ const char * const *clk_names; const char *prop_name; - int (*set_opp)(struct dev_pm_set_opp_data *data); config_regulators_t config_regulators; const unsigned int *supported_hw; unsigned int supported_hw_count; @@ -610,22 +575,6 @@ static inline int devm_pm_opp_set_clkname(struct device *dev, const char *name) return devm_pm_opp_set_config(dev, &config); } -/* set-opp helpers */ -static inline int dev_pm_opp_register_set_opp_helper(struct device *dev, - int (*set_opp)(struct dev_pm_set_opp_data *data)) -{ - struct dev_pm_opp_config config = { - .set_opp = set_opp, - }; - - return dev_pm_opp_set_config(dev, &config); -} - -static inline void dev_pm_opp_unregister_set_opp_helper(int token) -{ - dev_pm_opp_clear_config(token); -} - /* config-regulators helpers */ static inline int dev_pm_opp_set_config_regulators(struct device *dev, config_regulators_t helper)