From: Shobhit Kumar Date: Wed, 11 Dec 2013 12:22:05 +0000 (+0530) Subject: drm/i915: Reorganize the DSI enable/disable sequence X-Git-Tag: upstream/snapshot3+hdmi~3525^2~44^2~16 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=1dbd7cb256913e5b8d6a4837185b45e3467dff42;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git drm/i915: Reorganize the DSI enable/disable sequence Basically ULPS handling during enable/disable has been moved to pre_enable and post_disable phases. PLL and panel power disable also has been moved to post_disable phase. The ULPS entry/exit sequneces as suggested by HW team is as follows - During enable time - set DEVICE_READY --> Clear DEVICE_READY --> set DEVICE_READY And during disable time to flush all FIFOs - set ENTER_SLEEP --> EXIT_SLEEP --> ENTER_SLEEP Also during disbale sequnece sub-encoder disable is moved to the end after port is disabled. v2: Based on comments from Ville - Detailed epxlaination in the commit messgae - Moved parameter changes out into another patch - Backlight enabling will be a new patch v3: Updated as per Jani's comments - Removed the I915_WRITE_BITS as it is not needed - Moved panel_reset and send_otp_cmds hooks to dsi_pre_enable - Moved disable_panel_power hook to dsi_post_disable - Replace hardcoding with AFE_LATCHOUT v4: Make intel_dsi_device_ready and intel_dsi_clear_device_ready static Signed-off-by: Yogesh Mohan Marimuthu Signed-off-by: Shobhit Kumar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 1016e7b..e9bcb46 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -101,46 +101,57 @@ static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder) vlv_enable_dsi_pll(encoder); } -static void intel_dsi_pre_enable(struct intel_encoder *encoder) +static void intel_dsi_device_ready(struct intel_encoder *encoder) { + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + int pipe = intel_crtc->pipe; + u32 val; + DRM_DEBUG_KMS("\n"); -} -static void intel_dsi_enable(struct intel_encoder *encoder) + val = I915_READ(MIPI_PORT_CTRL(pipe)); + I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT); + usleep_range(2000, 2500); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); + usleep_range(2000, 2500); + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); + usleep_range(2000, 2500); + I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY); + usleep_range(2000, 2500); +} +static void intel_dsi_pre_enable(struct intel_encoder *encoder) { - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); - int pipe = intel_crtc->pipe; - u32 temp; DRM_DEBUG_KMS("\n"); if (intel_dsi->dev.dev_ops->panel_reset) intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev); - temp = I915_READ(MIPI_DEVICE_READY(pipe)); - if ((temp & DEVICE_READY) == 0) { - temp &= ~ULPS_STATE_MASK; - I915_WRITE(MIPI_DEVICE_READY(pipe), temp | DEVICE_READY); - } else if (temp & ULPS_STATE_MASK) { - temp &= ~ULPS_STATE_MASK; - I915_WRITE(MIPI_DEVICE_READY(pipe), temp | ULPS_STATE_EXIT); - /* - * We need to ensure that there is a minimum of 1 ms time - * available before clearing the UPLS exit state. - */ - msleep(2); - I915_WRITE(MIPI_DEVICE_READY(pipe), temp); - } + /* put device in ready state */ + intel_dsi_device_ready(encoder); if (intel_dsi->dev.dev_ops->send_otp_cmds) intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev); +} + +static void intel_dsi_enable(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + int pipe = intel_crtc->pipe; + u32 temp; + + DRM_DEBUG_KMS("\n"); if (is_cmd_mode(intel_dsi)) I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4); - - if (is_vid_mode(intel_dsi)) { + else { msleep(20); /* XXX */ dpi_send_cmd(intel_dsi, TURN_ON); msleep(100); @@ -157,7 +168,8 @@ static void intel_dsi_enable(struct intel_encoder *encoder) static void intel_dsi_disable(struct intel_encoder *encoder) { - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); int pipe = intel_crtc->pipe; @@ -165,8 +177,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder) DRM_DEBUG_KMS("\n"); - intel_dsi->dev.dev_ops->disable(&intel_dsi->dev); - if (is_vid_mode(intel_dsi)) { dpi_send_cmd(intel_dsi, SHUTDOWN); msleep(10); @@ -179,20 +189,54 @@ static void intel_dsi_disable(struct intel_encoder *encoder) msleep(2); } - temp = I915_READ(MIPI_DEVICE_READY(pipe)); - if (temp & DEVICE_READY) { - temp &= ~DEVICE_READY; - temp &= ~ULPS_STATE_MASK; - I915_WRITE(MIPI_DEVICE_READY(pipe), temp); - } + /* if disable packets are sent before sending shutdown packet then in + * some next enable sequence send turn on packet error is observed */ + if (intel_dsi->dev.dev_ops->disable) + intel_dsi->dev.dev_ops->disable(&intel_dsi->dev); } -static void intel_dsi_post_disable(struct intel_encoder *encoder) +static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) { + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + int pipe = intel_crtc->pipe; + u32 val; + DRM_DEBUG_KMS("\n"); + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + val = I915_READ(MIPI_PORT_CTRL(pipe)); + I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + + if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT) + == 0x00000), 30)) + DRM_ERROR("DSI LP not going Low\n"); + + I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00); + usleep_range(2000, 2500); + vlv_disable_dsi_pll(encoder); } +static void intel_dsi_post_disable(struct intel_encoder *encoder) +{ + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + + DRM_DEBUG_KMS("\n"); + + intel_dsi_clear_device_ready(encoder); + + if (intel_dsi->dev.dev_ops->disable_panel_power) + intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev); +} static bool intel_dsi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe) diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h index 14509d6..387dfe1 100644 --- a/drivers/gpu/drm/i915/intel_dsi.h +++ b/drivers/gpu/drm/i915/intel_dsi.h @@ -41,6 +41,8 @@ struct intel_dsi_dev_ops { void (*panel_reset)(struct intel_dsi_device *dsi); + void (*disable_panel_power)(struct intel_dsi_device *dsi); + /* one time programmable commands if needed */ void (*send_otp_cmds)(struct intel_dsi_device *dsi);