From: Linus Torvalds Date: Tue, 2 Aug 2022 21:58:58 +0000 (-0700) Subject: Merge tag 'lsm-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm X-Git-Tag: v6.1-rc5~760 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=1b6cf909647e64617958e6799c6e5bae413c7d0e;hp=ed56f4b5173efba00e3dcd736c18bce43255cf7a;p=platform%2Fkernel%2Flinux-starfive.git Merge tag 'lsm-pr-20220801' of git://git./linux/kernel/git/pcmoore/lsm Pull LSM update from Paul Moore: "A maintainer change for the LSM layer: James has asked me to take over the day-to-day responsibilities so a single patch to update the MAINTAINER info" * tag 'lsm-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: MAINTAINERS: update the LSM maintainer info --- diff --git a/.mailmap b/.mailmap index 825fae8..71577c3 100644 --- a/.mailmap +++ b/.mailmap @@ -10,6 +10,8 @@ # Please keep this list dictionary sorted. # Aaron Durbin +Abel Vesa +Abel Vesa Abhinav Kumar Adam Oldham Adam Radford @@ -58,10 +60,17 @@ Arnd Bergmann Atish Patra Axel Dyks Axel Lin +Baolin Wang +Baolin Wang +Baolin Wang +Baolin Wang Bart Van Assche Bart Van Assche Ben Gardner Ben M Cahill +Ben Widawsky +Ben Widawsky +Ben Widawsky Björn Steinbrink Björn Töpel Björn Töpel @@ -85,6 +94,7 @@ Christian Borntraeger Christian Brauner Christian Brauner Christian Brauner +Christian Marangi Christophe Ricard Christoph Hellwig Colin Ian King @@ -129,6 +139,8 @@ Frank Rowand Frank Zago Gao Xiang Gao Xiang +Gao Xiang +Gao Xiang Gerald Schaefer Gerald Schaefer Gerald Schaefer @@ -165,6 +177,7 @@ Jan Glauber Jan Glauber Jan Glauber Jarkko Sakkinen +Jarkko Sakkinen Jason Gunthorpe Jason Gunthorpe Jason Gunthorpe @@ -364,6 +377,7 @@ Sean Nyekjaer Sebastian Reichel Sebastian Reichel Sedat Dilek +Seth Forshee Shiraz Hashim Shuah Khan Shuah Khan diff --git a/CREDITS b/CREDITS index 7e85a53..40d3c65 100644 --- a/CREDITS +++ b/CREDITS @@ -627,6 +627,10 @@ S: 48287 Sawleaf S: Fremont, California 94539 S: USA +N: Tomas Cech +E: sleep_walker@suse.com +D: arm/palm treo support + N: Florent Chabaud E: florent.chabaud@polytechnique.org D: software suspend diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index e8797cd..cd14ecb 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -260,6 +260,15 @@ Description: for discards, and don't read this file. +What: /sys/block//queue/dma_alignment +Date: May 2022 +Contact: linux-block@vger.kernel.org +Description: + Reports the alignment that user space addresses must have to be + used for raw block device access with O_DIRECT and other driver + specific passthrough mechanisms. + + What: /sys/block//queue/fua Date: May 2018 Contact: linux-block@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata index 2f726c9..3daecac 100644 --- a/Documentation/ABI/testing/sysfs-ata +++ b/Documentation/ABI/testing/sysfs-ata @@ -107,13 +107,14 @@ Description: described in ATA8 7.16 and 7.17. Only valid if the device is not a PM. - pio_mode: (RO) Transfer modes supported by the device when - in PIO mode. Mostly used by PATA device. + pio_mode: (RO) PIO transfer mode used by the device. + Mostly used by PATA devices. - xfer_mode: (RO) Current transfer mode + xfer_mode: (RO) Current transfer mode. Mostly used by + PATA devices. - dma_mode: (RO) Transfer modes supported by the device when - in DMA mode. Mostly used by PATA device. + dma_mode: (RO) DMA transfer mode used by the device. + Mostly used by PATA devices. class: (RO) Device class. Can be "ata" for disk, "atapi" for packet device, "pmp" for PM, or diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610 index 308a675..491ead8 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-vf610 +++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610 @@ -1,4 +1,4 @@ -What: /sys/bus/iio/devices/iio:deviceX/conversion_mode +What: /sys/bus/iio/devices/iio:deviceX/in_conversion_mode KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon index 653d4c75..7271781 100644 --- a/Documentation/ABI/testing/sysfs-class-hwmon +++ b/Documentation/ABI/testing/sysfs-class-hwmon @@ -938,3 +938,12 @@ Description: - 1: enable RW + +What: /sys/class/hwmon/hwmonX/device/pec +Description: + PEC support on I2C devices + + - 0, off, n: disable + - 1, on, y: enable + + RW diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 2ad01ca..df79e12 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -493,12 +493,13 @@ What: /sys/devices/system/cpu/cpuX/regs/ /sys/devices/system/cpu/cpuX/regs/identification/ /sys/devices/system/cpu/cpuX/regs/identification/midr_el1 /sys/devices/system/cpu/cpuX/regs/identification/revidr_el1 + /sys/devices/system/cpu/cpuX/regs/identification/smidr_el1 Date: June 2016 Contact: Linux ARM Kernel Mailing list Description: AArch64 CPU registers 'identification' directory exposes the CPU ID registers for - identifying model and revision of the CPU. + identifying model and revision of the CPU and SMCU. What: /sys/devices/system/cpu/aarch32_el0 Date: May 2021 @@ -526,6 +527,7 @@ What: /sys/devices/system/cpu/vulnerabilities /sys/devices/system/cpu/vulnerabilities/srbds /sys/devices/system/cpu/vulnerabilities/tsx_async_abort /sys/devices/system/cpu/vulnerabilities/itlb_multihit + /sys/devices/system/cpu/vulnerabilities/mmio_stale_data Date: January 2018 Contact: Linux kernel mailing list Description: Information about CPU vulnerabilities diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator index 42214b4..90596d8 100644 --- a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator +++ b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator @@ -26,6 +26,6 @@ Description: Read/write the current state of DDR Backup Mode, which controls DDR Backup Mode must be explicitly enabled by the user, to invoke step 1. - See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt. + See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml. Users: User space applications for embedded boards equipped with a BD9571MWV PMIC. diff --git a/Documentation/admin-guide/device-mapper/writecache.rst b/Documentation/admin-guide/device-mapper/writecache.rst index 1042977..60c16b7 100644 --- a/Documentation/admin-guide/device-mapper/writecache.rst +++ b/Documentation/admin-guide/device-mapper/writecache.rst @@ -20,6 +20,7 @@ Constructor parameters: size) 5. the number of optional parameters (the parameters with an argument count as two) + start_sector n (default: 0) offset from the start of cache device in 512-byte sectors high_watermark n (default: 50) @@ -74,20 +75,21 @@ Constructor parameters: the origin volume in the last n milliseconds Status: + 1. error indicator - 0 if there was no error, otherwise error number 2. the number of blocks 3. the number of free blocks 4. the number of blocks under writeback -5. the number of read requests -6. the number of read requests that hit the cache -7. the number of write requests -8. the number of write requests that hit uncommitted block -9. the number of write requests that hit committed block -10. the number of write requests that bypass the cache -11. the number of write requests that are allocated in the cache +5. the number of read blocks +6. the number of read blocks that hit the cache +7. the number of write blocks +8. the number of write blocks that hit uncommitted block +9. the number of write blocks that hit committed block +10. the number of write blocks that bypass the cache +11. the number of write blocks that are allocated in the cache 12. the number of write requests that are blocked on the freelist 13. the number of flush requests -14. the number of discard requests +14. the number of discarded blocks Messages: flush diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst index 8cbc711..4df436e 100644 --- a/Documentation/admin-guide/hw-vuln/index.rst +++ b/Documentation/admin-guide/hw-vuln/index.rst @@ -17,3 +17,4 @@ are configurable at compile, boot or run time. special-register-buffer-data-sampling.rst core-scheduling.rst l1d_flush.rst + processor_mmio_stale_data.rst diff --git a/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst new file mode 100644 index 0000000..9393c50 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst @@ -0,0 +1,246 @@ +========================================= +Processor MMIO Stale Data Vulnerabilities +========================================= + +Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O +(MMIO) vulnerabilities that can expose data. The sequences of operations for +exposing data range from simple to very complex. Because most of the +vulnerabilities require the attacker to have access to MMIO, many environments +are not affected. System environments using virtualization where MMIO access is +provided to untrusted guests may need mitigation. These vulnerabilities are +not transient execution attacks. However, these vulnerabilities may propagate +stale data into core fill buffers where the data can subsequently be inferred +by an unmitigated transient execution attack. Mitigation for these +vulnerabilities includes a combination of microcode update and software +changes, depending on the platform and usage model. Some of these mitigations +are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or +those used to mitigate Special Register Buffer Data Sampling (SRBDS). + +Data Propagators +================ +Propagators are operations that result in stale data being copied or moved from +one microarchitectural buffer or register to another. Processor MMIO Stale Data +Vulnerabilities are operations that may result in stale data being directly +read into an architectural, software-visible state or sampled from a buffer or +register. + +Fill Buffer Stale Data Propagator (FBSDP) +----------------------------------------- +Stale data may propagate from fill buffers (FB) into the non-coherent portion +of the uncore on some non-coherent writes. Fill buffer propagation by itself +does not make stale data architecturally visible. Stale data must be propagated +to a location where it is subject to reading or sampling. + +Sideband Stale Data Propagator (SSDP) +------------------------------------- +The sideband stale data propagator (SSDP) is limited to the client (including +Intel Xeon server E3) uncore implementation. The sideband response buffer is +shared by all client cores. For non-coherent reads that go to sideband +destinations, the uncore logic returns 64 bytes of data to the core, including +both requested data and unrequested stale data, from a transaction buffer and +the sideband response buffer. As a result, stale data from the sideband +response and transaction buffers may now reside in a core fill buffer. + +Primary Stale Data Propagator (PSDP) +------------------------------------ +The primary stale data propagator (PSDP) is limited to the client (including +Intel Xeon server E3) uncore implementation. Similar to the sideband response +buffer, the primary response buffer is shared by all client cores. For some +processors, MMIO primary reads will return 64 bytes of data to the core fill +buffer including both requested data and unrequested stale data. This is +similar to the sideband stale data propagator. + +Vulnerabilities +=============== +Device Register Partial Write (DRPW) (CVE-2022-21166) +----------------------------------------------------- +Some endpoint MMIO registers incorrectly handle writes that are smaller than +the register size. Instead of aborting the write or only copying the correct +subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than +specified by the write transaction may be written to the register. On +processors affected by FBSDP, this may expose stale data from the fill buffers +of the core that created the write transaction. + +Shared Buffers Data Sampling (SBDS) (CVE-2022-21125) +---------------------------------------------------- +After propagators may have moved data around the uncore and copied stale data +into client core fill buffers, processors affected by MFBDS can leak data from +the fill buffer. It is limited to the client (including Intel Xeon server E3) +uncore implementation. + +Shared Buffers Data Read (SBDR) (CVE-2022-21123) +------------------------------------------------ +It is similar to Shared Buffer Data Sampling (SBDS) except that the data is +directly read into the architectural software-visible state. It is limited to +the client (including Intel Xeon server E3) uncore implementation. + +Affected Processors +=================== +Not all the CPUs are affected by all the variants. For instance, most +processors for the server market (excluding Intel Xeon E3 processors) are +impacted by only Device Register Partial Write (DRPW). + +Below is the list of affected Intel processors [#f1]_: + + =================== ============ ========= + Common name Family_Model Steppings + =================== ============ ========= + HASWELL_X 06_3FH 2,4 + SKYLAKE_L 06_4EH 3 + BROADWELL_X 06_4FH All + SKYLAKE_X 06_55H 3,4,6,7,11 + BROADWELL_D 06_56H 3,4,5 + SKYLAKE 06_5EH 3 + ICELAKE_X 06_6AH 4,5,6 + ICELAKE_D 06_6CH 1 + ICELAKE_L 06_7EH 5 + ATOM_TREMONT_D 06_86H All + LAKEFIELD 06_8AH 1 + KABYLAKE_L 06_8EH 9 to 12 + ATOM_TREMONT 06_96H 1 + ATOM_TREMONT_L 06_9CH 0 + KABYLAKE 06_9EH 9 to 13 + COMETLAKE 06_A5H 2,3,5 + COMETLAKE_L 06_A6H 0,1 + ROCKETLAKE 06_A7H 1 + =================== ============ ========= + +If a CPU is in the affected processor list, but not affected by a variant, it +is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later +section, mitigation largely remains the same for all the variants, i.e. to +clear the CPU fill buffers via VERW instruction. + +New bits in MSRs +================ +Newer processors and microcode update on existing affected processors added new +bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate +specific variants of Processor MMIO Stale Data vulnerabilities and mitigation +capability. + +MSR IA32_ARCH_CAPABILITIES +-------------------------- +Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the + Shared Buffers Data Read (SBDR) vulnerability or the sideband stale + data propagator (SSDP). +Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer + Stale Data Propagator (FBSDP). +Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data + Propagator (PSDP). +Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer + values as part of MD_CLEAR operations. Processors that do not + enumerate MDS_NO (meaning they are affected by MDS) but that do + enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate + FB_CLEAR as part of their MD_CLEAR support. +Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR + IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS + bit can be set to cause the VERW instruction to not perform the + FB_CLEAR action. Not all processors that support FB_CLEAR will support + FB_CLEAR_CTRL. + +MSR IA32_MCU_OPT_CTRL +--------------------- +Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR +action. This may be useful to reduce the performance impact of FB_CLEAR in +cases where system software deems it warranted (for example, when performance +is more critical, or the untrusted software has no MMIO access). Note that +FB_CLEAR_DIS has no impact on enumeration (for example, it does not change +FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors +that enumerate FB_CLEAR. + +Mitigation +========== +Like MDS, all variants of Processor MMIO Stale Data vulnerabilities have the +same mitigation strategy to force the CPU to clear the affected buffers before +an attacker can extract the secrets. + +This is achieved by using the otherwise unused and obsolete VERW instruction in +combination with a microcode update. The microcode clears the affected CPU +buffers when the VERW instruction is executed. + +Kernel reuses the MDS function to invoke the buffer clearing: + + mds_clear_cpu_buffers() + +On MDS affected CPUs, the kernel already invokes CPU buffer clear on +kernel/userspace, hypervisor/guest and C-state (idle) transitions. No +additional mitigation is needed on such CPUs. + +For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker +with MMIO capability. Therefore, VERW is not required for kernel/userspace. For +virtualization case, VERW is only needed at VMENTER for a guest with MMIO +capability. + +Mitigation points +----------------- +Return to user space +^^^^^^^^^^^^^^^^^^^^ +Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation +needed. + +C-State transition +^^^^^^^^^^^^^^^^^^ +Control register writes by CPU during C-state transition can propagate data +from fill buffer to uncore buffers. Execute VERW before C-state transition to +clear CPU fill buffers. + +Guest entry point +^^^^^^^^^^^^^^^^^ +Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise +execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by +MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO +Stale Data vulnerabilities, so there is no need to execute VERW for such guests. + +Mitigation control on the kernel command line +--------------------------------------------- +The kernel command line allows to control the Processor MMIO Stale Data +mitigations at boot time with the option "mmio_stale_data=". The valid +arguments for this option are: + + ========== ================================================================= + full If the CPU is vulnerable, enable mitigation; CPU buffer clearing + on exit to userspace and when entering a VM. Idle transitions are + protected as well. It does not automatically disable SMT. + full,nosmt Same as full, with SMT disabled on vulnerable CPUs. This is the + complete mitigation. + off Disables mitigation completely. + ========== ================================================================= + +If the CPU is affected and mmio_stale_data=off is not supplied on the kernel +command line, then the kernel selects the appropriate mitigation. + +Mitigation status information +----------------------------- +The Linux kernel provides a sysfs interface to enumerate the current +vulnerability status of the system: whether the system is vulnerable, and +which mitigations are active. The relevant sysfs file is: + + /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + +The possible values in this file are: + + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable + * - 'Vulnerable' + - The processor is vulnerable, but no mitigation enabled + * - 'Vulnerable: Clear CPU buffers attempted, no microcode' + - The processor is vulnerable, but microcode is not updated. The + mitigation is enabled on a best effort basis. + * - 'Mitigation: Clear CPU buffers' + - The processor is vulnerable and the CPU buffer clearing mitigation is + enabled. + +If the processor is vulnerable then the following information is appended to +the above information: + + ======================== =========================================== + 'SMT vulnerable' SMT is enabled + 'SMT disabled' SMT is disabled + 'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown + ======================== =========================================== + +References +---------- +.. [#f1] Affected Processors + https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8090130..a79b1b3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -400,6 +400,12 @@ arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension support + arm64.nosve [ARM64] Unconditionally disable Scalable Vector + Extension support + + arm64.nosme [ARM64] Unconditionally disable Scalable Matrix + Extension support + ataflop= [HW,M68k] atarimouse= [HW,MOUSE] Atari Mouse @@ -550,7 +556,7 @@ nosocket -- Disable socket memory accounting. nokmem -- Disable kernel memory accounting. - checkreqprot [SELINUX] Set initial checkreqprot flag value. + checkreqprot= [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. 0 -- check protection applied by kernel (includes @@ -1439,7 +1445,7 @@ (in particular on some ATI chipsets). The kernel tries to set a reasonable default. - enforcing [SELINUX] Set initial enforcing status. + enforcing= [SELINUX] Set initial enforcing status. Format: {"0" | "1"} See security/selinux/Kconfig help text. 0 -- permissive (log only, no denials). @@ -2469,7 +2475,6 @@ protected: nVHE-based mode with support for guests whose state is kept private from the host. - Not valid if the kernel is running in EL2. Defaults to VHE/nVHE based on hardware support. Setting mode to "protected" will disable kexec and hibernation @@ -3162,7 +3167,7 @@ improves system performance, but it may also expose users to several CPU vulnerabilities. Equivalent to: nopti [X86,PPC] - kpti=0 [ARM64] + if nokaslr then kpti=0 [ARM64] nospectre_v1 [X86,PPC] nobp=0 [S390] nospectre_v2 [X86,PPC,S390,ARM64] @@ -3176,6 +3181,8 @@ srbds=off [X86,INTEL] no_entry_flush [PPC] no_uaccess_flush [PPC] + mmio_stale_data=off [X86] + retbleed=off [X86] Exceptions: This does not have any effect on @@ -3197,6 +3204,8 @@ Equivalent to: l1tf=flush,nosmt [X86] mds=full,nosmt [X86] tsx_async_abort=full,nosmt [X86] + mmio_stale_data=full,nosmt [X86] + retbleed=auto,nosmt [X86] mminit_loglevel= [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this @@ -3206,6 +3215,40 @@ log everything. Information is printed at KERN_DEBUG so loglevel=8 may also need to be specified. + mmio_stale_data= + [X86,INTEL] Control mitigation for the Processor + MMIO Stale Data vulnerabilities. + + Processor MMIO Stale Data is a class of + vulnerabilities that may expose data after an MMIO + operation. Exposed data could originate or end in + the same CPU buffers as affected by MDS and TAA. + Therefore, similar to MDS and TAA, the mitigation + is to clear the affected CPU buffers. + + This parameter controls the mitigation. The + options are: + + full - Enable mitigation on vulnerable CPUs + + full,nosmt - Enable mitigation and disable SMT on + vulnerable CPUs. + + off - Unconditionally disable mitigation + + On MDS or TAA affected machines, + mmio_stale_data=off can be prevented by an active + MDS or TAA mitigation as these vulnerabilities are + mitigated with the same mechanism so in order to + disable this mitigation, you need to specify + mds=off and tsx_async_abort=off too. + + Not specifying this option is equivalent to + mmio_stale_data=full. + + For details see: + Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst + module.sig_enforce [KNL] When CONFIG_MODULE_SIG is set, this means that modules without (valid) signatures will fail to load. @@ -5162,6 +5205,30 @@ retain_initrd [RAM] Keep initrd memory after extraction + retbleed= [X86] Control mitigation of RETBleed (Arbitrary + Speculative Code Execution with Return Instructions) + vulnerability. + + off - no mitigation + auto - automatically select a migitation + auto,nosmt - automatically select a mitigation, + disabling SMT if necessary for + the full mitigation (only on Zen1 + and older without STIBP). + ibpb - mitigate short speculation windows on + basic block boundaries too. Safe, highest + perf impact. + unret - force enable untrained return thunks, + only effective on AMD f15h-f17h + based systems. + unret,nosmt - like unret, will disable SMT when STIBP + is not available. + + Selecting 'auto' will choose a mitigation method at run + time according to the CPU. + + Not specifying this option is equivalent to retbleed=auto. + rfkill.default_state= 0 "airplane mode". All wifi, bluetooth, wimax, gps, fm, etc. communication is blocked by default. @@ -5533,6 +5600,7 @@ eibrs - enhanced IBRS eibrs,retpoline - enhanced IBRS + Retpolines eibrs,lfence - enhanced IBRS + LFENCE + ibrs - use IBRS to protect kernel Not specifying this option is equivalent to spectre_v2=auto. @@ -5736,6 +5804,24 @@ expediting. Set to zero to disable automatic expediting. + srcutree.srcu_max_nodelay [KNL] + Specifies the number of no-delay instances + per jiffy for which the SRCU grace period + worker thread will be rescheduled with zero + delay. Beyond this limit, worker thread will + be rescheduled with a sleep delay of one jiffy. + + srcutree.srcu_max_nodelay_phase [KNL] + Specifies the per-grace-period phase, number of + non-sleeping polls of readers. Beyond this limit, + grace period worker thread will be rescheduled + with a sleep delay of one jiffy, between each + rescan of the readers, for a grace period phase. + + srcutree.srcu_retry_check_delay [KNL] + Specifies number of microseconds of non-sleeping + delay between each non-sleeping poll of readers. + srcutree.small_contention_lim [KNL] Specifies the number of update-side contention events per jiffy will be tolerated before diff --git a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst new file mode 100644 index 0000000..578407e --- /dev/null +++ b/Documentation/admin-guide/perf/hns3-pmu.rst @@ -0,0 +1,136 @@ +====================================== +HNS3 Performance Monitoring Unit (PMU) +====================================== + +HNS3(HiSilicon network system 3) Performance Monitoring Unit (PMU) is an +End Point device to collect performance statistics of HiSilicon SoC NIC. +On Hip09, each SICL(Super I/O cluster) has one PMU device. + +HNS3 PMU supports collection of performance statistics such as bandwidth, +latency, packet rate and interrupt rate. + +Each HNS3 PMU supports 8 hardware events. + +HNS3 PMU driver +=============== + +The HNS3 PMU driver registers a perf PMU with the name of its sicl id.:: + + /sys/devices/hns3_pmu_sicl_ + +PMU driver provides description of available events, filter modes, format, +identifier and cpumask in sysfs. + +The "events" directory describes the event code of all supported events +shown in perf list. + +The "filtermode" directory describes the supported filter modes of each +event. + +The "format" directory describes all formats of the config (events) and +config1 (filter options) fields of the perf_event_attr structure. + +The "identifier" file shows version of PMU hardware device. + +The "bdf_min" and "bdf_max" files show the supported bdf range of each +pmu device. + +The "hw_clk_freq" file shows the hardware clock frequency of each pmu +device. + +Example usage of checking event code and subevent code:: + + $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time + config=0x00204 + $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num + config=0x10204 + +Each performance statistic has a pair of events to get two values to +calculate real performance data in userspace. + +The bits 0~15 of config (here 0x0204) are the true hardware event code. If +two events have same value of bits 0~15 of config, that means they are +event pair. And the bit 16 of config indicates getting counter 0 or +counter 1 of hardware event. + +After getting two values of event pair in usersapce, the formula of +computation to calculate real performance data is::: + + counter 0 / counter 1 + +Example usage of checking supported filter mode:: + + $# cat /sys/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num + filter mode supported: global/port/port-tc/func/func-queue/ + +Example usage of perf:: + + $# perf list + hns3_pmu_sicl_0/bw_ssu_rpu_byte_num/ [kernel PMU event] + hns3_pmu_sicl_0/bw_ssu_rpu_time/ [kernel PMU event] + ------------------------------------------ + + $# perf stat -g -e hns3_pmu_sicl_0/bw_ssu_rpu_byte_num,global=1/ -e hns3_pmu_sicl_0/bw_ssu_rpu_time,global=1/ -I 1000 + or + $# perf stat -g -e hns3_pmu_sicl_0/config=0x00002,global=1/ -e hns3_pmu_sicl_0/config=0x10002,global=1/ -I 1000 + + +Filter modes +-------------- + +1. global mode +PMU collect performance statistics for all HNS3 PCIe functions of IO DIE. +Set the "global" filter option to 1 will enable this mode. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,global=1/ -I 1000 + +2. port mode +PMU collect performance statistic of one whole physical port. The port id +is same as mac id. The "tc" filter option must be set to 0xF in this mode, +here tc stands for traffic class. + +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0xF/ -I 1000 + +3. port-tc mode +PMU collect performance statistic of one tc of physical port. The port id +is same as mac id. The "tc" filter option must be set to 0 ~ 7 in this +mode. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0/ -I 1000 + +4. func mode +PMU collect performance statistic of one PF/VF. The function id is BDF of +PF/VF, its conversion formula:: + + func = (bus << 8) + (device << 3) + (function) + +for example: + BDF func + 35:00.0 0x3500 + 35:00.1 0x3501 + 35:01.0 0x3508 + +In this mode, the "queue" filter option must be set to 0xFFFF. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0xFFFF/ -I 1000 + +5. func-queue mode +PMU collect performance statistic of one queue of PF/VF. The function id +is BDF of PF/VF, the "queue" filter option must be set to the exact queue +id of function. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0/ -I 1000 + +6. func-intr mode +PMU collect performance statistic of one interrupt of PF/VF. The function +id is BDF of PF/VF, the "intr" filter option must be set to the exact +interrupt id of function. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x00301,bdf=0x3500,intr=0/ -I 1000 diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index 69b23f0..9c9ece8 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -9,6 +9,7 @@ Performance monitor support hisi-pmu hisi-pcie-pmu + hns3-pmu imx-ddr qcom_l2_pmu qcom_l3_pmu diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst index aec2cd2..19754be 100644 --- a/Documentation/admin-guide/pm/cpuidle.rst +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -612,8 +612,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor by default this way, for example. The other kernel command line parameters controlling CPU idle time management -described below are only relevant for the *x86* architecture and some of -them affect Intel processors only. +described below are only relevant for the *x86* architecture and references +to ``intel_idle`` affect Intel processors only. The *x86* architecture support code recognizes three kernel command line options related to CPU idle time management: ``idle=poll``, ``idle=halt``, @@ -635,10 +635,13 @@ idle, so it very well may hurt single-thread computations performance as well as energy-efficiency. Thus using it for performance reasons may not be a good idea at all.] -The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes -``acpi_idle`` to be used (as long as all of the information needed by it is -there in the system's ACPI tables), but it is not allowed to use the -``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states. +The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of +the CPU to enter idle states. When this option is used, the ``acpi_idle`` +driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems +running Intel processors, this option disables the ``intel_idle`` driver +and forces the use of the ``acpi_idle`` driver instead. Note that in either +case, ``acpi_idle`` driver will function only if all the information needed +by it is in the system's ACPI tables. In addition to the architecture-level kernel command line options affecting CPU idle time management, there are parameters affecting individual ``CPUIdle`` diff --git a/Documentation/arm/google/chromebook-boot-flow.rst b/Documentation/arm/google/chromebook-boot-flow.rst new file mode 100644 index 0000000..36da776 --- /dev/null +++ b/Documentation/arm/google/chromebook-boot-flow.rst @@ -0,0 +1,69 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +Chromebook Boot Flow +====================================== + +Most recent Chromebooks that use device tree are using the opensource +depthcharge_ bootloader. Depthcharge_ expects the OS to be packaged as a `FIT +Image`_ which contains an OS image as well as a collection of device trees. It +is up to depthcharge_ to pick the right device tree from the `FIT Image`_ and +provide it to the OS. + +The scheme that depthcharge_ uses to pick the device tree takes into account +three variables: + +- Board name, specified at depthcharge_ compile time. This is $(BOARD) below. +- Board revision number, determined at runtime (perhaps by reading GPIO + strappings, perhaps via some other method). This is $(REV) below. +- SKU number, read from GPIO strappings at boot time. This is $(SKU) below. + +For recent Chromebooks, depthcharge_ creates a match list that looks like this: + +- google,$(BOARD)-rev$(REV)-sku$(SKU) +- google,$(BOARD)-rev$(REV) +- google,$(BOARD)-sku$(SKU) +- google,$(BOARD) + +Note that some older Chromebooks use a slightly different list that may +not include SKU matching or may prioritize SKU/rev differently. + +Note that for some boards there may be extra board-specific logic to inject +extra compatibles into the list, but this is uncommon. + +Depthcharge_ will look through all device trees in the `FIT Image`_ trying to +find one that matches the most specific compatible. It will then look +through all device trees in the `FIT Image`_ trying to find the one that +matches the *second most* specific compatible, etc. + +When searching for a device tree, depthcharge_ doesn't care where the +compatible string falls within a device tree's root compatible string array. +As an example, if we're on board "lazor", rev 4, SKU 0 and we have two device +trees: + +- "google,lazor-rev5-sku0", "google,lazor-rev4-sku0", "qcom,sc7180" +- "google,lazor", "qcom,sc7180" + +Then depthcharge_ will pick the first device tree even though +"google,lazor-rev4-sku0" was the second compatible listed in that device tree. +This is because it is a more specific compatible than "google,lazor". + +It should be noted that depthcharge_ does not have any smarts to try to +match board or SKU revisions that are "close by". That is to say that +if depthcharge_ knows it's on "rev4" of a board but there is no "rev4" +device tree then depthcharge_ *won't* look for a "rev3" device tree. + +In general when any significant changes are made to a board the board +revision number is increased even if none of those changes need to +be reflected in the device tree. Thus it's fairly common to see device +trees with multiple revisions. + +It should be noted that, taking into account the above system that +depthcharge_ has, the most flexibility is achieved if the device tree +supporting the newest revision(s) of a board omits the "-rev{REV}" +compatible strings. When this is done then if you get a new board +revision and try to run old software on it then we'll at pick the +newest device tree we know about. + +.. _depthcharge: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/depthcharge/ +.. _`FIT Image`: https://doc.coreboot.org/lib/payloads/fit.html diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst index 2bda546..495ada7 100644 --- a/Documentation/arm/index.rst +++ b/Documentation/arm/index.rst @@ -31,6 +31,8 @@ SoC-specific documents .. toctree:: :maxdepth: 1 + google/chromebook-boot-flow + ixp4xx marvell diff --git a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst index b256f97..1dc6c39 100644 --- a/Documentation/arm/tcm.rst +++ b/Documentation/arm/tcm.rst @@ -34,7 +34,7 @@ CPU so it is usually wise not to overlap any physical RAM with the TCM. The TCM memory can then be remapped to another address again using -the MMU, but notice that the TCM if often used in situations where +the MMU, but notice that the TCM is often used in situations where the MMU is turned off. To avoid confusion the current Linux implementation will map the TCM 1 to 1 from physical to virtual memory in the location specified by the kernel. Currently Linux diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst index 3d116fb..31fc10b 100644 --- a/Documentation/arm64/elf_hwcaps.rst +++ b/Documentation/arm64/elf_hwcaps.rst @@ -301,6 +301,10 @@ HWCAP2_WFXT Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010. +HWCAP2_EBF16 + + Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010. + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arm64/memory.rst b/Documentation/arm64/memory.rst index 901cd09..2a641ba 100644 --- a/Documentation/arm64/memory.rst +++ b/Documentation/arm64/memory.rst @@ -33,9 +33,8 @@ AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit):: 0000000000000000 0000ffffffffffff 256TB user ffff000000000000 ffff7fffffffffff 128TB kernel logical memory map [ffff600000000000 ffff7fffffffffff] 32TB [kasan shadow region] - ffff800000000000 ffff800007ffffff 128MB bpf jit region - ffff800008000000 ffff80000fffffff 128MB modules - ffff800010000000 fffffbffefffffff 124TB vmalloc + ffff800000000000 ffff800007ffffff 128MB modules + ffff800008000000 fffffbffefffffff 124TB vmalloc fffffbfff0000000 fffffbfffdffffff 224MB fixed mappings (top down) fffffbfffe000000 fffffbfffe7fffff 8MB [guard region] fffffbfffe800000 fffffbffff7fffff 16MB PCI I/O space @@ -51,9 +50,8 @@ AArch64 Linux memory layout with 64KB pages + 3 levels (52-bit with HW support): 0000000000000000 000fffffffffffff 4PB user fff0000000000000 ffff7fffffffffff ~4PB kernel logical memory map [fffd800000000000 ffff7fffffffffff] 512TB [kasan shadow region] - ffff800000000000 ffff800007ffffff 128MB bpf jit region - ffff800008000000 ffff80000fffffff 128MB modules - ffff800010000000 fffffbffefffffff 124TB vmalloc + ffff800000000000 ffff800007ffffff 128MB modules + ffff800008000000 fffffbffefffffff 124TB vmalloc fffffbfff0000000 fffffbfffdffffff 224MB fixed mappings (top down) fffffbfffe000000 fffffbfffe7fffff 8MB [guard region] fffffbfffe800000 fffffbffff7fffff 16MB PCI I/O space diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index d27db84d..33b04db 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -82,10 +82,14 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A57 | #1319537 | ARM64_ERRATUM_1319367 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A57 | #1742098 | ARM64_ERRATUM_1742098 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A72 | #853709 | N/A | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A72 | #1319367 | ARM64_ERRATUM_1319367 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A72 | #1655431 | ARM64_ERRATUM_1742098 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A76 | #1188873,1418040| ARM64_ERRATUM_1418040 | @@ -102,6 +106,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2077057 | ARM64_ERRATUM_2077057 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2441009 | ARM64_ERRATUM_2441009 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2119858 | ARM64_ERRATUM_2119858 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A710 | #2054223 | ARM64_ERRATUM_2054223 | diff --git a/Documentation/arm64/sme.rst b/Documentation/arm64/sme.rst index 8ba677b..937147f 100644 --- a/Documentation/arm64/sme.rst +++ b/Documentation/arm64/sme.rst @@ -371,7 +371,7 @@ The regset data starts with struct user_za_header, containing: Appendix A. SME programmer's model (informative) ================================================= -This section provides a minimal description of the additions made by SVE to the +This section provides a minimal description of the additions made by SME to the ARMv8-A programmer's model that are relevant to this document. Note: This section is for information only and not intended to be complete or diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index d6b3f94..0793c40 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -223,7 +223,7 @@ Module Loading Inter Module support -------------------- -Refer to the file kernel/module.c for more information. +Refer to the files in kernel/module/ for more information. Hardware Interfaces =================== diff --git a/Documentation/core-api/protection-keys.rst b/Documentation/core-api/protection-keys.rst index ec575e7..bf28ac0 100644 --- a/Documentation/core-api/protection-keys.rst +++ b/Documentation/core-api/protection-keys.rst @@ -4,31 +4,29 @@ Memory Protection Keys ====================== -Memory Protection Keys for Userspace (PKU aka PKEYs) is a feature -which is found on Intel's Skylake (and later) "Scalable Processor" -Server CPUs. It will be available in future non-server Intel parts -and future AMD processors. - -For anyone wishing to test or use this feature, it is available in -Amazon's EC2 C5 instances and is known to work there using an Ubuntu -17.04 image. - -Memory Protection Keys provides a mechanism for enforcing page-based -protections, but without requiring modification of the page tables -when an application changes protection domains. It works by -dedicating 4 previously ignored bits in each page table entry to a -"protection key", giving 16 possible keys. - -There is also a new user-accessible register (PKRU) with two separate -bits (Access Disable and Write Disable) for each key. Being a CPU -register, PKRU is inherently thread-local, potentially giving each +Memory Protection Keys provide a mechanism for enforcing page-based +protections, but without requiring modification of the page tables when an +application changes protection domains. + +Pkeys Userspace (PKU) is a feature which can be found on: + * Intel server CPUs, Skylake and later + * Intel client CPUs, Tiger Lake (11th Gen Core) and later + * Future AMD CPUs + +Pkeys work by dedicating 4 previously Reserved bits in each page table entry to +a "protection key", giving 16 possible keys. + +Protections for each key are defined with a per-CPU user-accessible register +(PKRU). Each of these is a 32-bit register storing two bits (Access Disable +and Write Disable) for each of 16 keys. + +Being a CPU register, PKRU is inherently thread-local, potentially giving each thread a different set of protections from every other thread. -There are two new instructions (RDPKRU/WRPKRU) for reading and writing -to the new register. The feature is only available in 64-bit mode, -even though there is theoretically space in the PAE PTEs. These -permissions are enforced on data access only and have no effect on -instruction fetches. +There are two instructions (RDPKRU/WRPKRU) for reading and writing to the +register. The feature is only available in 64-bit mode, even though there is +theoretically space in the PAE PTEs. These permissions are enforced on data +access only and have no effect on instruction fetches. Syscalls ======== diff --git a/Documentation/core-api/symbol-namespaces.rst b/Documentation/core-api/symbol-namespaces.rst index 5ad9e0a..12e4aec 100644 --- a/Documentation/core-api/symbol-namespaces.rst +++ b/Documentation/core-api/symbol-namespaces.rst @@ -51,8 +51,8 @@ namespace ``USB_STORAGE``, use:: The corresponding ksymtab entry struct ``kernel_symbol`` will have the member ``namespace`` set accordingly. A symbol that is exported without a namespace will refer to ``NULL``. There is no default namespace if none is defined. ``modpost`` -and kernel/module.c make use the namespace at build time or module load time, -respectively. +and kernel/module/main.c make use the namespace at build time or module load +time, respectively. 2.2 Using the DEFAULT_SYMBOL_NAMESPACE define ============================================= diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 5e2017c..e6de1d7 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -25,7 +25,14 @@ properties: items: - enum: - altr,socfpga-arria10-socdk - - enclustra,mercury-aa1 + - const: altr,socfpga-arria10 + - const: altr,socfpga + + - description: Mercury+ AA1 boards + items: + - enum: + - google,chameleon-v3 + - const: enclustra,mercury-aa1 - const: altr,socfpga-arria10 - const: altr,socfpga @@ -47,6 +54,7 @@ properties: items: - enum: - altr,socfpga-stratix10-socdk + - altr,socfpga-stratix10-swvp - const: altr,socfpga-stratix10 - description: SoCFPGA VT diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml new file mode 100644 index 0000000..1895ce9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed SoC based boards + +maintainers: + - Joel Stanley + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: AST2400 based boards + items: + - enum: + - facebook,galaxy100-bmc + - facebook,wedge100-bmc + - facebook,wedge40-bmc + - microsoft,olympus-bmc + - quanta,q71l-bmc + - tyan,palmetto-bmc + - yadro,vesnin-bmc + - const: aspeed,ast2400 + + - description: AST2500 based boards + items: + - enum: + - amd,ethanolx-bmc + - ampere,mtjade-bmc + - aspeed,ast2500-evb + - asrock,e3c246d4i-bmc + - asrock,romed8hm3-bmc + - bytedance,g220a-bmc + - facebook,cmm-bmc + - facebook,minipack-bmc + - facebook,tiogapass-bmc + - facebook,yamp-bmc + - facebook,yosemitev2-bmc + - facebook,wedge400-bmc + - hxt,stardragon4800-rep2-bmc + - ibm,mihawk-bmc + - ibm,mowgli-bmc + - ibm,romulus-bmc + - ibm,swift-bmc + - ibm,witherspoon-bmc + - ingrasys,zaius-bmc + - inspur,fp5280g2-bmc + - inspur,nf5280m6-bmc + - inspur,on5263m5-bmc + - intel,s2600wf-bmc + - inventec,lanyang-bmc + - lenovo,hr630-bmc + - lenovo,hr855xg2-bmc + - portwell,neptune-bmc + - qcom,centriq2400-rep-bmc + - supermicro,x11spi-bmc + - tyan,s7106-bmc + - tyan,s8036-bmc + - yadro,nicole-bmc + - yadro,vegman-n110-bmc + - yadro,vegman-rx20-bmc + - yadro,vegman-sx20-bmc + - const: aspeed,ast2500 + + - description: AST2600 based boards + items: + - enum: + - aspeed,ast2600-evb + - aspeed,ast2600-evb-a1 + - facebook,bletchley-bmc + - facebook,cloudripper-bmc + - facebook,elbert-bmc + - facebook,fuji-bmc + - ibm,everest-bmc + - ibm,rainier-bmc + - ibm,tacoma-bmc + - inventec,transformer-bmc + - jabil,rbp-bmc + - nuvia,dc-scm-bmc + - quanta,s6q-bmc + - const: aspeed,ast2600 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index 4e495e0..2b7848b 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -163,9 +163,11 @@ properties: - const: microchip,sama7g5 - const: microchip,sama7 - - description: Microchip LAN9662 PCB8291 Evaluation Board. + - description: Microchip LAN9662 Evaluation Boards. items: - - const: microchip,lan9662-pcb8291 + - enum: + - microchip,lan9662-pcb8291 + - microchip,lan9662-pcb8309 - const: microchip,lan9662 - const: microchip,lan966 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 8b7e87f..958df32 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -87,6 +87,13 @@ properties: - const: brcm,bcm53012 - const: brcm,bcm4708 + - description: BCM53015 based boards + items: + - enum: + - meraki,mr26 + - const: brcm,bcm53015 + - const: brcm,bcm4708 + - description: BCM53016 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml index 5fb4558..324e591 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml @@ -28,6 +28,99 @@ properties: - const: brcm,bcm47622 - const: brcm,bcmbca + - description: BCM4912 based boards + items: + - enum: + - asus,gt-ax6000 + - brcm,bcm94912 + - const: brcm,bcm4912 + - const: brcm,bcmbca + + - description: BCM63138 based boards + items: + - enum: + - brcm,bcm963138 + - brcm,BCM963138DVT + - const: brcm,bcm63138 + - const: brcm,bcmbca + + - description: BCM63146 based boards + items: + - enum: + - brcm,bcm963146 + - const: brcm,bcm63146 + - const: brcm,bcmbca + + - description: BCM63148 based boards + items: + - enum: + - brcm,bcm963148 + - const: brcm,bcm63148 + - const: brcm,bcmbca + + - description: BCM63158 based boards + items: + - enum: + - brcm,bcm963158 + - const: brcm,bcm63158 + - const: brcm,bcmbca + + - description: BCM63178 based boards + items: + - enum: + - brcm,bcm963178 + - const: brcm,bcm63178 + - const: brcm,bcmbca + + - description: BCM6756 based boards + items: + - enum: + - brcm,bcm96756 + - const: brcm,bcm6756 + - const: brcm,bcmbca + + - description: BCM6813 based boards + items: + - enum: + - brcm,bcm96813 + - const: brcm,bcm6813 + - const: brcm,bcmbca + + - description: BCM6846 based boards + items: + - enum: + - brcm,bcm96846 + - const: brcm,bcm6846 + - const: brcm,bcmbca + + - description: BCM6855 based boards + items: + - enum: + - brcm,bcm96855 + - const: brcm,bcm6855 + - const: brcm,bcmbca + + - description: BCM6856 based boards + items: + - enum: + - brcm,bcm96856 + - const: brcm,bcm6856 + - const: brcm,bcmbca + + - description: BCM6858 based boards + items: + - enum: + - brcm,bcm96858 + - const: brcm,bcm6858 + - const: brcm,bcmbca + + - description: BCM6878 based boards + items: + - enum: + - brcm,bcm96878 + - const: brcm,bcm6878 + - const: brcm,bcmbca + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index ed04650..5c2e3a5 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -221,6 +221,7 @@ properties: - qcom,kpss-acc-v1 - qcom,kpss-acc-v2 - qcom,msm8226-smp + - qcom,msm8909-smp # Only valid on ARM 32-bit, see above for ARM v8 64-bit - qcom,msm8916-smp - renesas,apmu diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt deleted file mode 100644 index a87ec15..0000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ /dev/null @@ -1,271 +0,0 @@ -NXP i.MX System Controller Firmware (SCFW) --------------------------------------------------------------------- - -The System Controller Firmware (SCFW) is a low-level system function -which runs on a dedicated Cortex-M core to provide power, clock, and -resource management. It exists on some i.MX8 processors. e.g. i.MX8QM -(QM, QP), and i.MX8QX (QXP, DX). - -The AP communicates with the SC using a multi-ported MU module found -in the LSIO subsystem. The current definition of this MU module provides -5 remote AP connections to the SC to support up to 5 execution environments -(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces -with the LSIO DSC IP bus. The SC firmware will communicate with this MU -using the MSI bus. - -System Controller Device Node: -============================================================ - -The scu node with the following properties shall be under the /firmware/ node. - -Required properties: -------------------- -- compatible: should be "fsl,imx-scu". -- mbox-names: should include "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3"; - include "gip3" if want to support general MU interrupt. -- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for - rx, and 1 optional MU channel for general interrupt. - All MU channels must be in the same MU instance. - Cross instances are not allowed. The MU instance can only - be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need - to make sure use the one which is not conflict with other - execution environments. e.g. ATF. - Note: - Channel 0 must be "tx0" or "rx0". - Channel 1 must be "tx1" or "rx1". - Channel 2 must be "tx2" or "rx2". - Channel 3 must be "tx3" or "rx3". - General interrupt rx channel must be "gip3". - e.g. - mboxes = <&lsio_mu1 0 0 - &lsio_mu1 0 1 - &lsio_mu1 0 2 - &lsio_mu1 0 3 - &lsio_mu1 1 0 - &lsio_mu1 1 1 - &lsio_mu1 1 2 - &lsio_mu1 1 3 - &lsio_mu1 3 3>; - See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml - for detailed mailbox binding. - -Note: Each mu which supports general interrupt should have an alias correctly -numbered in "aliases" node. -e.g. -aliases { - mu1 = &lsio_mu1; -}; - -i.MX SCU Client Device Node: -============================================================ - -Client nodes are maintained as children of the relevant IMX-SCU device node. - -Power domain bindings based on SCU Message Protocol ------------------------------------------------------------- - -This binding for the SCU power domain providers uses the generic power -domain binding[2]. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qm-scu-pd", - "fsl,imx8qxp-scu-pd" - followed by "fsl,scu-pd" - -- #power-domain-cells: Must be 1. Contains the Resource ID used by - SCU commands. - See detailed Resource ID list from: - include/dt-bindings/firmware/imx/rsrc.h - -Clock bindings based on SCU Message Protocol ------------------------------------------------------------- - -This binding uses the common clock binding[1]. - -Required properties: -- compatible: Should be one of: - "fsl,imx8dxl-clk" - "fsl,imx8qm-clk" - "fsl,imx8qxp-clk" - followed by "fsl,scu-clk" -- #clock-cells: Should be 2. - Contains the Resource and Clock ID value. -- clocks: List of clock specifiers, must contain an entry for - each required entry in clock-names -- clock-names: Should include entries "xtal_32KHz", "xtal_24MHz" - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. - -See the full list of clock IDs from: -include/dt-bindings/clock/imx8qxp-clock.h - -Pinctrl bindings based on SCU Message Protocol ------------------------------------------------------------- - -This binding uses the i.MX common pinctrl binding[3]. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qm-iomuxc", - "fsl,imx8qxp-iomuxc", - "fsl,imx8dxl-iomuxc". - -Required properties for Pinctrl sub nodes: -- fsl,pins: Each entry consists of 3 integers which represents - the mux and config setting for one pin. The first 2 - integers are specified using a - PIN_FUNC_ID macro, which can be found in - , - , - . - The last integer CONFIG is the pad setting value like - pull-up on this pin. - - Please refer to i.MX8QXP Reference Manual for detailed - CONFIG settings. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/power/power-domain.yaml -[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt - -RTC bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: should be "fsl,imx8qxp-sc-rtc"; - -OCOTP bindings based on SCU Message Protocol ------------------------------------------------------------- -Required properties: -- compatible: Should be one of: - "fsl,imx8qm-scu-ocotp", - "fsl,imx8qxp-scu-ocotp". -- #address-cells: Must be 1. Contains byte index -- #size-cells: Must be 1. Contains byte length - -Optional Child nodes: - -- Data cells of ocotp: - Detailed bindings are described in bindings/nvmem/nvmem.txt - -Watchdog bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: should be: - "fsl,imx8qxp-sc-wdt" - followed by "fsl,imx-sc-wdt"; -Optional properties: -- timeout-sec: contains the watchdog timeout in seconds. - -SCU key bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: should be: - "fsl,imx8qxp-sc-key" - followed by "fsl,imx-sc-key"; -- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml - -Thermal bindings based on SCU Message Protocol ------------------------------------------------------------- - -Required properties: -- compatible: Should be : - "fsl,imx8qxp-sc-thermal" - followed by "fsl,imx-sc-thermal"; - -- #thermal-sensor-cells: See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml - for a description. - -Example (imx8qxp): -------------- -aliases { - mu1 = &lsio_mu1; -}; - -lsio_mu1: mailbox@5d1c0000 { - ... - #mbox-cells = <2>; -}; - -firmware { - scu { - compatible = "fsl,imx-scu"; - mbox-names = "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3", - "gip3"; - mboxes = <&lsio_mu1 0 0 - &lsio_mu1 0 1 - &lsio_mu1 0 2 - &lsio_mu1 0 3 - &lsio_mu1 1 0 - &lsio_mu1 1 1 - &lsio_mu1 1 2 - &lsio_mu1 1 3 - &lsio_mu1 3 3>; - - clk: clk { - compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; - #clock-cells = <2>; - }; - - iomuxc { - compatible = "fsl,imx8qxp-iomuxc"; - - pinctrl_lpuart0: lpuart0grp { - fsl,pins = < - SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 - SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 - >; - }; - ... - }; - - ocotp: imx8qx-ocotp { - compatible = "fsl,imx8qxp-scu-ocotp"; - #address-cells = <1>; - #size-cells = <1>; - - fec_mac0: mac@2c4 { - reg = <0x2c4 8>; - }; - }; - - pd: imx8qx-pd { - compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; - #power-domain-cells = <1>; - }; - - rtc: rtc { - compatible = "fsl,imx8qxp-sc-rtc"; - }; - - scu_key: scu-key { - compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; - linux,keycodes = ; - }; - - watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; - }; - - tsens: thermal-sensor { - compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; - #thermal-sensor-cells = <1>; - }; - }; -}; - -serial@5a060000 { - ... - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart0>; - clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; - clock-names = "ipg"; - power-domains = <&pd IMX_SC_R_UART_0>; -}; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index ef52437..7431579 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -321,6 +321,7 @@ properties: - enum: - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board + - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - const: toradex,apalis_imx6q - const: fsl,imx6q @@ -670,30 +671,30 @@ properties: - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules items: - enum: - - toradex,colibri-imx6ull-aster # Colibri iMX6ULL Module on Aster Carrier Board - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board V3 - - toradex,colibri-imx6ull-iris # Colibri iMX6ULL Module on Iris Carrier Board - - toradex,colibri-imx6ull-iris-v2 # Colibri iMX6ULL Module on Iris V2 Carrier Board + - toradex,colibri-imx6ull-aster # Aster Carrier Board + - toradex,colibri-imx6ull-eval # Colibri Evaluation Board V3 + - toradex,colibri-imx6ull-iris # Iris Carrier Board + - toradex,colibri-imx6ull-iris-v2 # Iris V2 Carrier Board - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module items: - enum: - - toradex,colibri-imx6ull-emmc-aster # Colibri iMX6ULL 1G (eMMC) on Aster Carrier Board - - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1G (eMMC) on Colibri Evaluation B. V3 - - toradex,colibri-imx6ull-emmc-iris # Colibri iMX6ULL 1G (eMMC) on Iris Carrier Board - - toradex,colibri-imx6ull-emmc-iris-v2 # Colibri iMX6ULL 1G (eMMC) on Iris V2 Carrier Board + - toradex,colibri-imx6ull-emmc-aster # Aster Carrier Board + - toradex,colibri-imx6ull-emmc-eval # Colibri Evaluation B. V3 + - toradex,colibri-imx6ull-emmc-iris # Iris Carrier Board + - toradex,colibri-imx6ull-emmc-iris-v2 # Iris V2 Carrier Board - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules items: - enum: - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Eval. B. V3 - - toradex,colibri-imx6ull-wifi-aster # Colibri iMX6ULL Wi-Fi / BT M. on Aster Carrier Board - - toradex,colibri-imx6ull-wifi-iris # Colibri iMX6ULL Wi-Fi / BT M. on Iris Carrier Board - - toradex,colibri-imx6ull-wifi-iris-v2 # Colibri iMX6ULL Wi-Fi / BT M. on Iris V2 Carrier Board + - toradex,colibri-imx6ull-wifi-eval # Colibri Eval. B. V3 + - toradex,colibri-imx6ull-wifi-aster # Aster Carrier Board + - toradex,colibri-imx6ull-wifi-iris # Iris Carrier Board + - toradex,colibri-imx6ull-wifi-iris-v2 # Iris V2 Carrier Board - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module - const: fsl,imx6ull @@ -738,6 +739,8 @@ properties: - enum: - toradex,colibri-imx7s-aster # Module on Aster Carrier Board - toradex,colibri-imx7s-eval-v3 # Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7s-iris # Module on Iris Carrier Board + - toradex,colibri-imx7s-iris-v2 # Module on Iris Carrier Board V2 - const: toradex,colibri-imx7s - const: fsl,imx7s @@ -789,8 +792,10 @@ properties: - description: i.MX7D Boards with Toradex Colibri i.MX7D Module items: - enum: - - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-aster # Aster Carrier Board + - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3 + - toradex,colibri-imx7d-iris # Iris Carrier Board + - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2 - const: toradex,colibri-imx7d - const: fsl,imx7d @@ -799,6 +804,8 @@ properties: - enum: - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board - toradex,colibri-imx7d-emmc-eval-v3 # Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-emmc-iris # Module on Iris Carrier Board + - toradex,colibri-imx7d-emmc-iris-v2 # Module on Iris Carrier Board V2 - const: toradex,colibri-imx7d-emmc - const: fsl,imx7d @@ -865,6 +872,12 @@ properties: - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module - const: fsl,imx8mm + - description: PHYTEC phyCORE-i.MX8MM SoM based boards + items: + - const: phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK + - const: phytec,imx8mm-phycore-som # phyCORE-i.MX8MM SoM + - const: fsl,imx8mm + - description: Variscite VAR-SOM-MX8MM based boards items: - const: variscite,var-som-mx8mm-symphony @@ -914,6 +927,8 @@ properties: - description: i.MX8MP based Boards items: - enum: + - dh,imx8mp-dhcom-som # i.MX8MP DHCOM SoM + - dh,imx8mp-dhcom-pdk2 # i.MX8MP DHCOM SoM on PDK2 board - fsl,imx8mp-evk # i.MX8MP EVK Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules @@ -952,6 +967,18 @@ properties: - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module - const: fsl,imx8mp + - description: + TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip + variants. It is designed to be soldered on different carrier boards. + All CPU variants use the same device tree hence only one compatible + is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed + version as an industrial computing device. + items: + - enum: + - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL + - const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -1020,6 +1047,12 @@ properties: - fsl,imx8ulp-evk # i.MX8ULP EVK Board - const: fsl,imx8ulp + - description: i.MX93 based Boards + items: + - enum: + - fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board + - const: fsl,imx93 + - description: Freescale Vybrid Platform Device Tree Bindings diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml new file mode 100644 index 0000000..8960fb8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Alleycat5/5X Platforms + +maintainers: + - Chris Packham + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Alleycat5 (98DX25xx) Reference Design + items: + - enum: + - marvell,rd-ac5 + - const: marvell,ac5 + + - description: Alleycat5X (98DX35xx) Reference Design + items: + - enum: + - marvell,rd-ac5x + - const: marvell,ac5x + - const: marvell,ac5 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 4a2bd97..07c0ea9 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -131,6 +131,36 @@ properties: - enum: - mediatek,mt8183-evb - const: mediatek,mt8183 + - description: Google Hayato + items: + - const: google,hayato-rev1 + - const: google,hayato + - const: mediatek,mt8192 + - description: Google Spherion (Acer Chromebook 514) + items: + - const: google,spherion-rev3 + - const: google,spherion-rev2 + - const: google,spherion-rev1 + - const: google,spherion-rev0 + - const: google,spherion + - const: mediatek,mt8192 + - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H) + items: + - enum: + - google,tomato-rev2 + - google,tomato-rev1 + - const: google,tomato + - const: mediatek,mt8195 + - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H) + items: + - const: google,tomato-rev4 + - const: google,tomato-rev3 + - const: google,tomato + - const: mediatek,mt8195 + - items: + - enum: + - mediatek,mt8186-evb + - const: mediatek,mt8186 - items: - enum: - mediatek,mt8192-evb diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 611f666..8585f6f 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8135-pericfg - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg + - mediatek,mt8186-pericfg - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml index 95e5137..43409e5 100644 --- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml +++ b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml @@ -8,6 +8,7 @@ title: NPCM Platforms Device Tree Bindings maintainers: - Jonathan Neuschäfer + - Tomer Maimon properties: $nodename: @@ -26,4 +27,10 @@ properties: - nuvoton,npcm750-evb # NPCM750 evaluation board - const: nuvoton,npcm750 + - description: NPCM845 based boards + items: + - enum: + - nuvoton,npcm845-evb # NPCM845 evaluation board + - const: nuvoton,npcm845 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml index fcb211a..94e72f2 100644 --- a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml +++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml @@ -8,6 +8,7 @@ title: Global Control Registers block in Nuvoton SoCs maintainers: - Jonathan Neuschäfer + - Tomer Maimon description: The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs @@ -20,6 +21,7 @@ properties: - enum: - nuvoton,wpcm450-gcr - nuvoton,npcm750-gcr + - nuvoton,npcm845-gcr - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 5c06d1b..fb1d00b 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: QCOM device tree bindings maintainers: - - Stephen Boyd + - Bjorn Andersson description: | Some qcom based bootloaders identify the dtb blob based on a set of @@ -38,18 +38,24 @@ description: | msm8992 msm8994 msm8996 + msm8998 + qcs404 sa8155p sa8540p sc7180 sc7280 sc8180x sc8280xp + sda660 sdm630 sdm632 + sdm636 sdm660 sdm845 sdx55 sdx65 + sm6125 + sm6350 sm7225 sm8150 sm8250 @@ -90,6 +96,11 @@ description: | A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in foundry 2. + There are many devices in the list below that run the standard ChromeOS + bootloader setup and use the open source depthcharge bootloader to boot the + OS. These devices do not use the scheme described above. For details, see: + https://docs.kernel.org/arm/google/chromebook-boot-flow.html + properties: $nodename: const: "/" @@ -153,28 +164,50 @@ properties: - const: qcom,msm8974 - items: - - enum: - - alcatel,idol347 - - const: qcom,msm8916-mtp/1 - const: qcom,msm8916-mtp + - const: qcom,msm8916-mtp/1 - const: qcom,msm8916 - items: - enum: - - longcheer,l8150 + - alcatel,idol347 + - asus,z00l + - huawei,g7 + - longcheer,l8910 - samsung,a3u-eur - samsung,a5u-eur + - samsung,j5 + - samsung,serranove + - wingtech,wt88047 + - const: qcom,msm8916 + + - items: + - const: longcheer,l8150 + - const: qcom,msm8916-v1-qrd/9-v1 - const: qcom,msm8916 - items: - enum: + - lg,bullhead + - microsoft,talkman + - xiaomi,libra + - const: qcom,msm8992 + + - items: + - enum: - sony,karin_windy + - const: qcom,apq8094 + + - items: + - enum: + - huawei,angler + - microsoft,cityman + - sony,ivy-row - sony,karin-row - sony,satsuki-row - sony,sumire-row - sony,suzuran-row - - qcom,msm8994 - - const: qcom,apq8094 + - const: qcom,msm8994 - items: - enum: @@ -190,11 +223,26 @@ properties: - sony,kagura-row - sony,keyaki-row - xiaomi,gemini + - xiaomi,natrium - xiaomi,scorpio - const: qcom,msm8996 - items: - enum: + - asus,novago-tp370ql + - fxtec,pro1 + - hp,envy-x2 + - lenovo,miix-630 + - oneplus,cheeseburger + - oneplus,dumpling + - qcom,msm8998-mtp + - sony,xperia-lilac + - sony,xperia-maple + - sony,xperia-poplar + - const: qcom,msm8998 + + - items: + - enum: - qcom,ipq4019-ap-dk01.1-c1 - qcom,ipq4019-ap-dk04.1-c3 - qcom,ipq4019-ap-dk07.1-c1 @@ -214,19 +262,317 @@ properties: - qcom,ipq8074-hk10-c2 - const: qcom,ipq8074 - - items: + - description: Qualcomm Technologies, Inc. SC7180 IDP + items: - enum: - qcom,sc7180-idp - const: qcom,sc7180 - - items: - - enum: - - qcom,sc7280-crd - - qcom,sc7280-idp - - qcom,sc7280-idp2 - - google,hoglin - - google,piglin - - google,senor + - description: HP Chromebook x2 11c (rev1 - 2) + items: + - const: google,coachz-rev1 + - const: google,coachz-rev2 + - const: qcom,sc7180 + + - description: HP Chromebook x2 11c (newest rev) + items: + - const: google,coachz + - const: qcom,sc7180 + + - description: HP Chromebook x2 11c with LTE (rev1 - 2) + items: + - const: google,coachz-rev1-sku0 + - const: google,coachz-rev2-sku0 + - const: qcom,sc7180 + + - description: HP Chromebook x2 11c with LTE (newest rev) + items: + - const: google,coachz-sku0 + - const: qcom,sc7180 + + - description: Lenovo Chromebook Duet 5 13 (rev2) + items: + - const: google,homestar-rev2 + - const: google,homestar-rev23 + - const: qcom,sc7180 + + - description: Lenovo Chromebook Duet 5 13 (rev3) + items: + - const: google,homestar-rev3 + - const: qcom,sc7180 + + - description: Lenovo Chromebook Duet 5 13 (newest rev) + items: + - const: google,homestar + - const: qcom,sc7180 + + - description: Google Kingoftown (rev0) + items: + - const: google,kingoftown-rev0 + - const: qcom,sc7180 + + - description: Google Kingoftown (newest rev) + items: + - const: google,kingoftown + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (rev0) + items: + - const: google,lazor-rev0 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (rev1 - 2) + items: + - const: google,lazor-rev1 + - const: google,lazor-rev2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (rev3 - 8) + items: + - const: google,lazor-rev3 + - const: google,lazor-rev4 + - const: google,lazor-rev5 + - const: google,lazor-rev6 + - const: google,lazor-rev7 + - const: google,lazor-rev8 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 (newest rev) + items: + - const: google,lazor + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2) + items: + - const: google,lazor-rev1-sku2 + - const: google,lazor-rev2-sku2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8) + items: + - const: google,lazor-rev3-sku2 + - const: google,lazor-rev4-sku2 + - const: google,lazor-rev5-sku2 + - const: google,lazor-rev6-sku2 + - const: google,lazor-rev7-sku2 + - const: google,lazor-rev8-sku2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with KB Backlight (newest rev) + items: + - const: google,lazor-sku2 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with LTE (rev1 - 2) + items: + - const: google,lazor-rev1-sku0 + - const: google,lazor-rev2-sku0 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with LTE (rev3 - 8) + items: + - const: google,lazor-rev3-sku0 + - const: google,lazor-rev4-sku0 + - const: google,lazor-rev5-sku0 + - const: google,lazor-rev6-sku0 + - const: google,lazor-rev7-sku0 + - const: google,lazor-rev8-sku0 + - const: qcom,sc7180 + + - description: Acer Chromebook Spin 513 with LTE (newest rev) + items: + - const: google,lazor-sku0 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 (rev4 - rev8) + items: + - const: google,lazor-rev4-sku4 + - const: google,lazor-rev5-sku4 + - const: google,lazor-rev6-sku4 + - const: google,lazor-rev7-sku4 + - const: google,lazor-rev8-sku4 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 (newest rev) + items: + - const: google,lazor-sku4 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 without Touchscreen (rev4) + items: + - const: google,lazor-rev4-sku5 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8) + items: + - const: google,lazor-rev5-sku5 + - const: google,lazor-rev5-sku6 + - const: google,lazor-rev6-sku6 + - const: google,lazor-rev7-sku6 + - const: google,lazor-rev8-sku6 + - const: qcom,sc7180 + + - description: Acer Chromebook 511 without Touchscreen (newest rev) + items: + - const: google,lazor-sku6 + - const: qcom,sc7180 + + - description: Google Mrbland with AUO panel (rev0) + items: + - const: google,mrbland-rev0-sku0 + - const: qcom,sc7180 + + - description: Google Mrbland with AUO panel (newest rev) + items: + - const: google,mrbland-sku1536 + - const: qcom,sc7180 + + - description: Google Mrbland with BOE panel (rev0) + items: + - const: google,mrbland-rev0-sku16 + - const: qcom,sc7180 + + - description: Google Mrbland with BOE panel (newest rev) + items: + - const: google,mrbland-sku1024 + - const: google,mrbland-sku768 + - const: qcom,sc7180 + + - description: Google Pazquel with Parade (newest rev) + items: + - const: google,pazquel-sku5 + - const: qcom,sc7180 + + - description: Google Pazquel with TI (newest rev) + items: + - const: google,pazquel-sku1 + - const: qcom,sc7180 + + - description: Google Pazquel with LTE and Parade (newest rev) + items: + - const: google,pazquel-sku4 + - const: qcom,sc7180 + + - description: Google Pazquel with LTE and TI (newest rev) + items: + - const: google,pazquel-sku0 + - const: google,pazquel-sku2 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 (rev1) + items: + - const: google,pompom-rev1 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 (rev2) + items: + - const: google,pompom-rev2 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 (newest rev) + items: + - const: google,pompom + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 with LTE (rev1) + items: + - const: google,pompom-rev1-sku0 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 with LTE (rev2) + items: + - const: google,pompom-rev2-sku0 + - const: qcom,sc7180 + + - description: Sharp Dynabook Chromebook C1 with LTE (newest rev) + items: + - const: google,pompom-sku0 + - const: qcom,sc7180 + + - description: Google Quackingstick (newest rev) + items: + - const: google,quackingstick-sku1537 + - const: qcom,sc7180 + + - description: Google Quackingstick with LTE (newest rev) + items: + - const: google,quackingstick-sku1536 + - const: qcom,sc7180 + + - description: Google Trogdor (newest rev) + items: + - const: google,trogdor + - const: qcom,sc7180 + + - description: Google Trogdor with LTE (newest rev) + items: + - const: google,trogdor-sku0 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0) + items: + - const: google,wormdingler-rev0-sku16 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev) + items: + - const: google,wormdingler-sku1024 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev) + items: + - const: google,wormdingler-sku1025 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0) + items: + - const: google,wormdingler-rev0-sku0 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev) + items: + - const: google,wormdingler-sku0 + - const: qcom,sc7180 + + - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev) + items: + - const: google,wormdingler-sku1 + - const: qcom,sc7180 + + - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4) + items: + - const: qcom,sc7280-crd + - const: google,hoglin-rev3 + - const: google,hoglin-rev4 + - const: google,piglin-rev3 + - const: google,piglin-rev4 + - const: qcom,sc7280 + + - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev) + items: + - const: google,hoglin + - const: qcom,sc7280 + + - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform + items: + - const: qcom,sc7280-idp + - const: google,senor + - const: qcom,sc7280 + + - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform + items: + - const: qcom,sc7280-idp2 + - const: google,piglin + - const: qcom,sc7280 + + - description: Google Herobrine (newest rev) + items: + - const: google,herobrine + - const: qcom,sc7280 + + - description: Google Villager (newest rev) + items: + - const: google,villager - const: qcom,sc7280 - items: @@ -238,16 +584,36 @@ properties: - items: - enum: + - lenovo,thinkpad-x13s + - qcom,sc8280xp-crd - qcom,sc8280xp-qrd - const: qcom,sc8280xp - items: - enum: + - sony,discovery-row + - sony,kirin-row + - sony,pioneer-row + - sony,voyager-row + - const: qcom,sdm630 + + - items: + - enum: + - inforce,ifc6560 + - const: qcom,sda660 + + - items: + - enum: - fairphone,fp3 - const: qcom,sdm632 - items: - enum: + - sony,mermaid-row + - const: qcom,sdm636 + + - items: + - enum: - xiaomi,lavender - const: qcom,sdm660 @@ -271,6 +637,13 @@ properties: - items: - enum: + - qcom,qcs404-evb-1000 + - qcom,qcs404-evb-4000 + - const: qcom,qcs404-evb + - const: qcom,qcs404 + + - items: + - enum: - qcom,sa8155p-adp - const: qcom,sa8155p @@ -281,24 +654,62 @@ properties: - items: - enum: + - lenovo,yoga-c630 + - lg,judyln + - lg,judyp + - oneplus,enchilada + - oneplus,fajita + - qcom,sdm845-mtp + - shift,axolotl + - samsung,w737 + - sony,akari-row + - sony,akatsuki-row + - sony,apollo-row + - thundercomm,db845c + - xiaomi,beryllium + - xiaomi,polaris + - const: qcom,sdm845 + + - items: + - enum: + - sony,pdx201 + - const: qcom,sm6125 + + - items: + - enum: + - sony,pdx213 + - const: qcom,sm6350 + + - items: + - enum: - fairphone,fp4 - const: qcom,sm7225 - items: - enum: + - microsoft,surface-duo + - qcom,sm8150-hdk - qcom,sm8150-mtp + - sony,bahamut-generic + - sony,griffin-generic - const: qcom,sm8150 - items: - enum: - qcom,qrb5165-rb5 + - qcom,sm8250-hdk - qcom,sm8250-mtp + - sony,pdx203-generic + - sony,pdx206-generic - const: qcom,sm8250 - items: - enum: + - microsoft,surface-duo2 - qcom,sm8350-hdk - qcom,sm8350-mtp + - sony,pdx214-generic + - sony,pdx215-generic - const: qcom,sm8350 - items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index cf9eb1e..7811ba6 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -554,6 +554,11 @@ properties: - const: vamrs,rk3399pro-vmarc-som - const: rockchip,rk3399pro + - description: Radxa ROCK Pi S + items: + - const: radxa,rockpis + - const: rockchip,rk3308 + - description: Radxa Rock2 Square items: - const: radxa,rock2-square diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml new file mode 100644 index 0000000..653f859 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C, S5P and Exynos SoC compatibles naming convention + +maintainers: + - Krzysztof Kozlowski + +description: | + Guidelines for new compatibles for SoC blocks/components. + When adding new compatibles in new bindings, use the format:: + samsung,SoC-IP + + For example:: + samsung,exynos5433-cmu-isp + +select: + properties: + compatible: + pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$" + required: + - compatible + +properties: + compatible: + oneOf: + - description: Preferred naming style for compatibles of SoC components + pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$" + + # Legacy compatibles with wild-cards - list cannot grow with new bindings: + - enum: + - samsung,exynos4x12-pinctrl + - samsung,exynos4x12-usb2-phy + - samsung,s3c64xx-pinctrl + - samsung,s3c64xx-wakeup-eint + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 8b31565..4c605bc 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -59,12 +59,18 @@ properties: - prt,prtt1s # Protonic PRTT1S - const: st,stm32mp151 - - description: DH STM32MP153 SoM based Boards + - description: DH STM32MP153 DHCOM SoM based Boards items: - const: dh,stm32mp153c-dhcom-drc02 - const: dh,stm32mp153c-dhcom-som - const: st,stm32mp153 + - description: DH STM32MP153 DHCOR SoM based Boards + items: + - const: dh,stm32mp153c-dhcor-drc-compact + - const: dh,stm32mp153c-dhcor-som + - const: st,stm32mp153 + - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box diff --git a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml new file mode 100644 index 0000000..def7d0c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Boards + +maintainers: + - qinjian + +description: | + ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC. + Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - sunplus,sp7021-achip + - sunplus,sp7021-demo-v3 + - const: sunplus,sp7021 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 95278a6..0c23567 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -863,6 +863,11 @@ properties: - const: yones-toptech,bs1078-v2 - const: allwinner,sun6i-a31s + - description: X96 Mate TV box + items: + - const: hechuang,x96-mate + - const: allwinner,sun50i-h616 + - description: Xunlong OrangePi items: - const: xunlong,orangepi @@ -963,4 +968,9 @@ properties: - const: xunlong,orangepi-zero-plus2-h3 - const: allwinner,sun8i-h3 + - description: Xunlong OrangePi Zero 2 + items: + - const: xunlong,orangepi-zero2 + - const: allwinner,sun50i-h616 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index 8eee312..9956668 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -29,10 +29,20 @@ properties: compatible: enum: - allwinner,sun5i-a13-mbus + - allwinner,sun8i-a33-mbus + - allwinner,sun8i-a50-mbus + - allwinner,sun8i-a83t-mbus - allwinner,sun8i-h3-mbus - allwinner,sun8i-r40-mbus + - allwinner,sun8i-v3s-mbus + - allwinner,sun8i-v536-mbus + - allwinner,sun20i-d1-mbus - allwinner,sun50i-a64-mbus + - allwinner,sun50i-a100-mbus - allwinner,sun50i-h5-mbus + - allwinner,sun50i-h6-mbus + - allwinner,sun50i-h616-mbus + - allwinner,sun50i-r329-mbus reg: minItems: 1 @@ -81,13 +91,13 @@ required: - dma-ranges if: - properties: - compatible: - contains: - enum: - - allwinner,sun8i-h3-mbus - - allwinner,sun50i-a64-mbus - - allwinner,sun50i-h5-mbus + not: + properties: + compatible: + contains: + enum: + - allwinner,sun5i-a13-mbus + - allwinner,sun8i-r40-mbus then: properties: diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml index 8c6543b..711bb4d 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml @@ -40,7 +40,6 @@ required: - compatible - reg - nvidia,bpmp - - status examples: - | diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml new file mode 100644 index 0000000..788a13f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra194 AXI2APB bridge + +maintainers: + - Sumit Gupta + +properties: + $nodename: + pattern: "^axi2apb@([0-9a-f]+)$" + + compatible: + enum: + - nvidia,tegra194-axi2apb + + reg: + maxItems: 6 + description: Physical base address and length of registers for all bridges + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + axi2apb: axi2apb@2390000 { + compatible = "nvidia,tegra194-axi2apb"; + reg = <0x02390000 0x1000>, + <0x023a0000 0x1000>, + <0x023b0000 0x1000>, + <0x023c0000 0x1000>, + <0x023d0000 0x1000>, + <0x023e0000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml new file mode 100644 index 0000000..debb2b0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra194 CBB 1.0 bindings + +maintainers: + - Sumit Gupta + +description: |+ + The Control Backbone (CBB) is comprised of the physical path from an + initiator to a target's register configuration space. CBB 1.0 has + multiple hierarchical sub-NOCs (Network-on-Chip) and connects various + initiators and targets using different bridges like AXIP2P, AXI2APB. + + This driver handles errors due to illegal register accesses reported + by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs + "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC" + which is the main NOC. + + By default, the access issuing initiator is informed about the error + using SError or Data Abort exception unless the ERD (Error Response + Disable) is enabled/set for that initiator. If the ERD is enabled, then + SError or Data Abort is masked and the error is reported with interrupt. + + - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the + errors due to illegal accesses from CCPLEX are reported by interrupts. + If ERD is not set, then error is reported by SError. + - For other initiators, the ERD is disabled. So, the access issuing + initiator is informed about the illegal access by Data Abort exception. + In addition, an interrupt is also generated to CCPLEX. These initiators + include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and + engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder + engine) etc which can initiate transactions. + + The driver prints relevant debug information like Error Code, Error + Description, Master, Address, AXI ID, Cache, Protection, Security Group + etc on receiving error notification. + +properties: + $nodename: + pattern: "^[a-z]+-noc@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra194-cbb-noc + - nvidia,tegra194-aon-noc + - nvidia,tegra194-bpmp-noc + - nvidia,tegra194-rce-noc + - nvidia,tegra194-sce-noc + + reg: + maxItems: 1 + + interrupts: + description: + CCPLEX receives secure or nonsecure interrupt depending on error type. + A secure interrupt is received for SEC(firewall) & SLV errors and a + non-secure interrupt is received for TMO & DEC errors. + items: + - description: non-secure interrupt + - description: secure interrupt + + nvidia,axi2apb: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Specifies the node having all axi2apb bridges which need to be checked + for any error logged in their status register. + + nvidia,apbmisc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Specifies the apbmisc node which need to be used for reading the ERD + register. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - nvidia,apbmisc + +examples: + - | + #include + + cbb-noc@2300000 { + compatible = "nvidia,tegra194-cbb-noc"; + reg = <0x02300000 0x1000>; + interrupts = , + ; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml new file mode 100644 index 0000000..7b1fe50 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra CBB 2.0 bindings + +maintainers: + - Sumit Gupta + +description: |+ + The Control Backbone (CBB) is comprised of the physical path from an + initiator to a target's register configuration space. CBB 2.0 consists + of multiple sub-blocks connected to each other to create a topology. + The Tegra234 SoC has different fabrics based on CBB 2.0 architecture + which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and + "CBB central fabric". + + In CBB 2.0, each initiator which can issue transactions connects to a + Root Master Node (MN) before it connects to any other element of the + fabric. Each Root MN contains a Error Monitor (EM) which detects and + logs error. Interrupts from various EM blocks are collated by Error + Notifier (EN) which is per fabric and presents a single interrupt from + fabric to the SoC interrupt controller. + + The driver handles errors from CBB due to illegal register accesses + and prints debug information about failed transaction on receiving + the interrupt from EN. Debug information includes Error Code, Error + Description, MasterID, Fabric, SlaveID, Address, Cache, Protection, + Security Group etc on receiving error notification. + + If the Error Response Disable (ERD) is set/enabled for an initiator, + then SError or Data abort exception error response is masked and an + interrupt is used for reporting errors due to illegal accesses from + that initiator. The value returned on read failures is '0xFFFFFFFF' + for compatibility with PCIE. + +properties: + $nodename: + pattern: "^[a-z]+-fabric@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra234-aon-fabric + - nvidia,tegra234-bpmp-fabric + - nvidia,tegra234-cbb-fabric + - nvidia,tegra234-dce-fabric + - nvidia,tegra234-rce-fabric + - nvidia,tegra234-sce-fabric + + reg: + maxItems: 1 + + interrupts: + items: + - description: secure interrupt from error notifier + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + + cbb-fabric@1300000 { + compatible = "nvidia,tegra234-cbb-fabric"; + reg = <0x13a00000 0x400000>; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml index e79eeac..17caf78 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml @@ -28,6 +28,9 @@ properties: - items: - const: allwinner,sun8i-r40-de2-clk - const: allwinner,sun8i-h3-de2-clk + - items: + - const: allwinner,sun20i-d1-de2-clk + - const: allwinner,sun50i-h5-de2-clk reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml new file mode 100644 index 0000000..f2c4846 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol + +maintainers: + - Abel Vesa + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the common clock binding. + (Documentation/devicetree/bindings/clock/clock-bindings.txt) + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See the full list of clock IDs from + include/dt-bindings/clock/imx8qxp-clock.h + +properties: + compatible: + items: + - enum: + - fsl,imx8dxl-clk + - fsl,imx8qm-clk + - fsl,imx8qxp-clk + - const: fsl,scu-clk + + '#clock-cells': + const: 2 + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index be66f1e..7c331bfb 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -45,7 +45,7 @@ description: | The case where SH and SP are both 1 is likely not very interesting. maintainers: - - Luca Ceresoli + - Luca Ceresoli properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml new file mode 100644 index 0000000..771db2d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM8XX Clock Controller Binding + +maintainers: + - Tomer Maimon + +description: | + Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which + generates and supplies clocks to all modules within the BMC. + +properties: + compatible: + enum: + - nuvoton,npcm845-clk + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full + list of NPCM8XX clock IDs. + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + ahb { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@f0801000 { + compatible = "nuvoton,npcm845-clk"; + reg = <0x0 0xf0801000 0x0 0x1000>; + #clock-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml index 3149767..7a8d375 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml @@ -4,18 +4,19 @@ $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250 +title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350 maintainers: - Jonathan Marek description: | Qualcomm display clock control module which supports the clocks, resets and - power domains on SM8150 and SM8250. + power domains on SM8150/SM8250/SM8350. See also: dt-bindings/clock/qcom,dispcc-sm8150.h dt-bindings/clock/qcom,dispcc-sm8250.h + dt-bindings/clock/qcom,dispcc-sm8350.h properties: compatible: @@ -23,6 +24,7 @@ properties: - qcom,sc8180x-dispcc - qcom,sm8150-dispcc - qcom,sm8250-dispcc + - qcom,sm8350-dispcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml new file mode 100644 index 0000000..0a0546c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Graphics Clock & Reset Controller Binding + +maintainers: + - Robert Foss + +description: | + Qualcomm graphics clock control module which supports the clocks, resets and + power domains on Qualcomm SoCs. + + See also: + dt-bindings/clock/qcom,gpucc-sm8350.h + +properties: + compatible: + enum: + - qcom,sm8350-gpucc + + clocks: + items: + - description: Board XO source + - description: GPLL0 main branch source + - description: GPLL0 div branch source + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + clock-controller@3d90000 { + compatible = "qcom,sm8350-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml new file mode 100644 index 0000000..268f4c6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SM8450 + +maintainers: + - Vladimir Zapolskiy + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SM8450. + + See also include/dt-bindings/clock/qcom,sm8450-camcc.h + +properties: + compatible: + const: qcom,sm8450-camcc + + clocks: + items: + - description: Camera AHB clock from GCC + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + power-domains: + maxItems: 1 + description: + A phandle and PM domain specifier for the MMCX power domain. + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - required-opps + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include + #include + #include + clock-controller@ade0000 { + compatible = "qcom,sm8450-camcc"; + reg = <0xade0000 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SM8450_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml index 5073e56..006d33a 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml @@ -33,6 +33,7 @@ properties: enum: - samsung,exynos7885-cmu-top - samsung,exynos7885-cmu-core + - samsung,exynos7885-cmu-fsys - samsung,exynos7885-cmu-peri clocks: @@ -92,6 +93,32 @@ allOf: properties: compatible: contains: + const: samsung,exynos7885-cmu-fsys + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS bus clock (from CMU_TOP) + - description: MMC_CARD clock (from CMU_TOP) + - description: MMC_EMBD clock (from CMU_TOP) + - description: MMC_SDIO clock (from CMU_TOP) + - description: USB30DRD clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_fsys_bus + - const: dout_fsys_mmc_card + - const: dout_fsys_mmc_embd + - const: dout_fsys_mmc_sdio + - const: dout_fsys_usb30drd + + - if: + properties: + compatible: + contains: const: samsung,exynos7885-cmu-peri then: diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index f8c47422..242fe92 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -78,6 +78,7 @@ if: contains: enum: - st,stm32mp1-rcc-secure + - st,stm32mp13-rcc then: properties: clocks: diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml new file mode 100644 index 0000000..bcc1408 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 SoC Clock Controller + +maintainers: + - Qin Jian + +properties: + compatible: + const: sunplus,sp7021-clkc + + reg: + maxItems: 3 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + extclk: osc0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "extclk"; + }; + + clkc: clock-controller@9c000004 { + compatible = "sunplus,sp7021-clkc"; + reg = <0x9c000004 0x28>, + <0x9c000200 0x44>, + <0x9c000268 0x08>; + clocks = <&extclk>; + #clock-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt index 73470ec..ce91a91 100644 --- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt +++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt @@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node. firmware. On some SoCs, this firmware supports DFS and DVFS in addition to Adaptive Voltage Scaling. -[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt +[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml Node brcm,avs-cpu-data-mem diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index a9a776da..10b3a7a 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -63,8 +63,8 @@ additionalProperties: true examples: - | / { - model = "Qualcomm Technologies, Inc. QCS404"; - compatible = "qcom,qcs404"; + model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; + compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404"; #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt deleted file mode 100644 index bcaa2c0..0000000 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ /dev/null @@ -1,488 +0,0 @@ -* Generic Exynos Bus frequency device - -The Samsung Exynos SoC has many buses for data transfer between DRAM -and sub-blocks in SoC. Most Exynos SoCs share the common architecture -for buses. Generally, each bus of Exynos SoC includes a source clock -and a power line, which are able to change the clock frequency -of the bus in runtime. To monitor the usage of each bus in runtime, -the driver uses the PPMU (Platform Performance Monitoring Unit), which -is able to measure the current load of sub-blocks. - -The Exynos SoC includes the various sub-blocks which have the each AXI bus. -The each AXI bus has the owned source clock but, has not the only owned -power line. The power line might be shared among one more sub-blocks. -So, we can divide into two type of device as the role of each sub-block. -There are two type of bus devices as following: -- parent bus device -- passive bus device - -Basically, parent and passive bus device share the same power line. -The parent bus device can only change the voltage of shared power line -and the rest bus devices (passive bus device) depend on the decision of -the parent bus device. If there are three blocks which share the VDD_xxx -power line, Only one block should be parent device and then the rest blocks -should depend on the parent device as passive device. - - VDD_xxx |--- A block (parent) - |--- B block (passive) - |--- C block (passive) - -There are a little different composition among Exynos SoC because each Exynos -SoC has different sub-blocks. Therefore, such difference should be specified -in devicetree file instead of each device driver. In result, this driver -is able to support the bus frequency for all Exynos SoCs. - -Required properties for all bus devices: -- compatible: Should be "samsung,exynos-bus". -- clock-names : the name of clock used by the bus, "bus". -- clocks : phandles for clock specified in "clock-names" property. -- operating-points-v2: the OPP table including frequency/voltage information - to support DVFS (Dynamic Voltage/Frequency Scaling) feature. - -Required properties only for parent bus device: -- vdd-supply: the regulator to provide the buses with the voltage. -- devfreq-events: the devfreq-event device to monitor the current utilization - of buses. - -Required properties only for passive bus device: -- devfreq: the parent bus device. - -Optional properties only for parent bus device: -- exynos,saturation-ratio: the percentage value which is used to calibrate - the performance count against total cycle count. - -Optional properties for the interconnect functionality (QoS frequency -constraints): -- #interconnect-cells: should be 0. -- interconnects: as documented in ../interconnect.txt, describes a path at the - higher level interconnects used by this interconnect provider. - If this interconnect provider is directly linked to a top level interconnect - provider the property contains only one phandle. The provider extends - the interconnect graph by linking its node to a node registered by provider - pointed to by first phandle in the 'interconnects' property. - -- samsung,data-clock-ratio: ratio of the data throughput in B/s to minimum data - clock frequency in Hz, default value is 8 when this property is missing. - -Detailed correlation between sub-blocks and power line according to Exynos SoC: -- In case of Exynos3250, there are two power line as following: - VDD_MIF |--- DMC - - VDD_INT |--- LEFTBUS (parent device) - |--- PERIL - |--- MFC - |--- G3D - |--- RIGHTBUS - |--- PERIR - |--- FSYS - |--- LCD0 - |--- PERIR - |--- ISP - |--- CAM - -- In case of Exynos4210, there is one power line as following: - VDD_INT |--- DMC (parent device) - |--- LEFTBUS - |--- PERIL - |--- MFC(L) - |--- G3D - |--- TV - |--- LCD0 - |--- RIGHTBUS - |--- PERIR - |--- MFC(R) - |--- CAM - |--- FSYS - |--- GPS - |--- LCD0 - |--- LCD1 - -- In case of Exynos4x12, there are two power line as following: - VDD_MIF |--- DMC - - VDD_INT |--- LEFTBUS (parent device) - |--- PERIL - |--- MFC(L) - |--- G3D - |--- TV - |--- IMAGE - |--- RIGHTBUS - |--- PERIR - |--- MFC(R) - |--- CAM - |--- FSYS - |--- GPS - |--- LCD0 - |--- ISP - -- In case of Exynos5422, there are two power line as following: - VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) - |--- DREX 1 - - VDD_INT |--- NoC_Core (parent device) - |--- G2D - |--- G3D - |--- DISP1 - |--- NoC_WCORE - |--- GSCL - |--- MSCL - |--- ISP - |--- MFC - |--- GEN - |--- PERIS - |--- PERIC - |--- FSYS - |--- FSYS2 - -- In case of Exynos5433, there is VDD_INT power line as following: - VDD_INT |--- G2D (parent device) - |--- MSCL - |--- GSCL - |--- JPEG - |--- MFC - |--- HEVC - |--- BUS0 - |--- BUS1 - |--- BUS2 - |--- PERIS (Fixed clock rate) - |--- PERIC (Fixed clock rate) - |--- FSYS (Fixed clock rate) - -Example 1: - Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to - power line (regulator). The MIF (Memory Interface) AXI bus is used to - transfer data between DRAM and CPU and uses the VDD_MIF regulator. - - - MIF (Memory Interface) block - : VDD_MIF |--- DMC (Dynamic Memory Controller) - - - INT (Internal) block - : VDD_INT |--- LEFTBUS (parent device) - |--- PERIL - |--- MFC - |--- G3D - |--- RIGHTBUS - |--- FSYS - |--- LCD0 - |--- PERIR - |--- ISP - |--- CAM - - - MIF bus's frequency/voltage table - ----------------------- - |Lv| Freq | Voltage | - ----------------------- - |L1| 50000 |800000 | - |L2| 100000 |800000 | - |L3| 134000 |800000 | - |L4| 200000 |825000 | - |L5| 400000 |875000 | - ----------------------- - - - INT bus's frequency/voltage table - ---------------------------------------------------------- - |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | - | name| |LCD0 | | | || | - | | |FSYS | | | || | - | | |MFC | | | || | - ---------------------------------------------------------- - |Mode |*parent|passive |passive|passive|passive|| | - ---------------------------------------------------------- - |Lv |Frequency ||Voltage | - ---------------------------------------------------------- - |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | - |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | - |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | - |L4 |134000 |134000 |200000 |200000 | ||1000000 | - |L5 |200000 |200000 |400000 |300000 | ||1000000 | - ---------------------------------------------------------- - -Example 2: - The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi - is listed below: - - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&cmu_dmc CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; - - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - opp-microvolt = <800000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <800000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <800000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <825000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <875000>; - }; - }; - - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_rightbus: bus_rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_lcd0: bus_lcd0 { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_160>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_200>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_mcuisp: bus_mcuisp { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>; - clock-names = "bus"; - operating-points-v2 = <&bus_mcuisp_opp_table>; - status = "disabled"; - }; - - bus_isp: bus_isp { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_266>; - clock-names = "bus"; - operating-points-v2 = <&bus_isp_opp_table>; - status = "disabled"; - }; - - bus_peril: bus_peril { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_DIV_ACLK_100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peril_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&cmu CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_leftbus_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - opp-microvolt = <900000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - opp-microvolt = <900000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <1000000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <1000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1000000>; - }; - }; - - bus_mcuisp_opp_table: opp_table2 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - }; - }; - - bus_isp_opp_table: opp_table3 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - }; - }; - - bus_peril_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-80000000 { - opp-hz = /bits/ 64 <80000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - }; - - - Usage case to handle the frequency and voltage of bus on runtime - in exynos3250-rinato.dts is listed below: - - &bus_dmc { - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; - vdd-supply = <&buck1_reg>; /* VDD_MIF */ - status = "okay"; - }; - - &bus_leftbus { - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; - vdd-supply = <&buck3_reg>; - status = "okay"; - }; - - &bus_rightbus { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_lcd0 { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_fsys { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_mcuisp { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_isp { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_peril { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - - &bus_mfc { - devfreq = <&bus_leftbus>; - status = "okay"; - }; - -Example 3: - An interconnect path "bus_display -- bus_leftbus -- bus_dmc" on - Exynos4412 SoC with video mixer as an interconnect consumer device. - - soc { - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - samsung,data-clock-ratio = <4>; - #interconnect-cells = <0>; - }; - - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - #interconnect-cells = <0>; - interconnects = <&bus_dmc>; - }; - - bus_display: bus_display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - #interconnect-cells = <0>; - interconnects = <&bus_leftbus &bus_dmc>; - }; - - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - /* ... */ - } - - bus_leftbus_opp_table: opp_table3 { - compatible = "operating-points-v2"; - /* ... */ - }; - - bus_display_opp_table: opp_table4 { - compatible = "operating-points-v2"; - /* .. */ - }; - - &mixer { - compatible = "samsung,exynos4212-mixer"; - interconnects = <&bus_display &bus_dmc>; - /* ... */ - }; - }; diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index c388ae5..c9c346e 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -94,6 +94,7 @@ if: - allwinner,sun8i-a83t-display-engine - allwinner,sun8i-r40-display-engine - allwinner,sun9i-a80-display-engine + - allwinner,sun20i-d1-display-engine - allwinner,sun50i-a64-display-engine then: diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml index 795a08a..2a17ec6 100644 --- a/Documentation/devicetree/bindings/display/arm,malidp.yaml +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml @@ -71,11 +71,6 @@ properties: - description: number of output lines for the green channel (G) - description: number of output lines for the blue channel (B) - arm,malidp-arqos-high-level: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - integer describing the ARQoS levels of DP500's QoS signaling - arm,malidp-arqos-value: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -113,7 +108,7 @@ examples: clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-high-level = <0xd000d000>; + arm,malidp-arqos-value = <0xd000d000>; port { dp0_output: endpoint { diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index b41991e..d3c3e4b 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7180 target maintainers: - - Krishna Manikandan + - Krishna Manikandan description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 6e417d0..f427eec 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7280 maintainers: - - Krishna Manikandan + - Krishna Manikandan description: | Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index 1a42491..2bb8896 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SDM845 target maintainers: - - Krishna Manikandan + - Krishna Manikandan description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 7095ec3c8..880bfe9 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI controller maintainers: - - Krishna Manikandan + - Krishna Manikandan allOf: - $ref: "../dsi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index 2d5a766..716f921 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 10nm PHY maintainers: - - Krishna Manikandan + - Krishna Manikandan allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 81dbee4..1342d74 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 14nm PHY maintainers: - - Krishna Manikandan + - Krishna Manikandan allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml index b8de785..9c1f914 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 20nm PHY maintainers: - - Krishna Manikandan + - Krishna Manikandan allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 69eecaa..3d8540a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 28nm PHY maintainers: - - Krishna Manikandan + - Krishna Manikandan allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml index 502bdda..76d40f7 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Description of Qualcomm Display DSI PHY common dt properties maintainers: - - Krishna Manikandan + - Krishna Manikandan description: | This defines the DSI PHY dt properties which are common for all diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml index 5e4e0e5..628c4b8 100644 --- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml @@ -21,6 +21,9 @@ properties: enable-gpios: true port: true + spi-cpha: true + spi-cpol: true + required: - compatible - enable-gpios diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml index d525165..c0fabeb 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml @@ -42,6 +42,9 @@ properties: panel-height-mm: description: physical panel height [mm] + spi-cpha: true + spi-cpol: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index 9e1d707..d984b59 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -23,6 +23,9 @@ properties: backlight: true port: true + spi-cpha: true + spi-cpol: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml index f902a9d..e8c8ee8 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml @@ -28,6 +28,9 @@ properties: backlight: true port: true + spi-cpha: true + spi-cpol: true + required: - compatible - port diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index ff0a5c5..e712444 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -67,7 +67,7 @@ if: then: properties: clocks: - maxItems: 2 + minItems: 2 required: - clock-names diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 948e2a3..1c0388d 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -183,6 +183,12 @@ properties: required: - reg + protocol@18: + type: object + properties: + reg: + const: 0x18 + additionalProperties: false patternProperties: @@ -323,6 +329,10 @@ examples: }; }; }; + + scmi_powercap: protocol@18 { + reg = <0x18>; + }; }; }; diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml new file mode 100644 index 0000000..b40b0ef --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml @@ -0,0 +1,210 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX System Controller Firmware (SCFW) + +maintainers: + - Dong Aisheng + +description: + The System Controller Firmware (SCFW) is a low-level system function + which runs on a dedicated Cortex-M core to provide power, clock, and + resource management. It exists on some i.MX8 processors. e.g. i.MX8QM + (QM, QP), and i.MX8QX (QXP, DX). + The AP communicates with the SC using a multi-ported MU module found + in the LSIO subsystem. The current definition of this MU module provides + 5 remote AP connections to the SC to support up to 5 execution environments + (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces + with the LSIO DSC IP bus. The SC firmware will communicate with this MU + using the MSI bus. + +properties: + compatible: + const: fsl,imx-scu + + clock-controller: + description: + Clock controller node that provides the clocks controlled by the SCU + $ref: /schemas/clock/fsl,scu-clk.yaml + + ocotp: + description: + OCOTP controller node provided by the SCU + $ref: /schemas/nvmem/fsl,scu-ocotp.yaml + + keys: + description: + Keys provided by the SCU + $ref: /schemas/input/fsl,scu-key.yaml + + mboxes: + description: + A list of phandles of TX MU channels followed by a list of phandles of + RX MU channels. The list may include at the end one more optional MU + channel for general interrupt. The number of expected tx and rx + channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu" + compatible, 4 TX and 4 RX channels otherwise. All MU channels must be + within the same MU instance. Cross instances are not allowed. The MU + instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users + need to ensure that one is used that does not conflict with other + execution environments such as ATF. + oneOf: + - items: + - description: TX0 MU channel + - description: RX0 MU channel + - items: + - description: TX0 MU channel + - description: RX0 MU channel + - description: optional MU channel for general interrupt + - items: + - description: TX0 MU channel + - description: TX1 MU channel + - description: TX2 MU channel + - description: TX3 MU channel + - description: RX0 MU channel + - description: RX1 MU channel + - description: RX2 MU channel + - description: RX3 MU channel + - items: + - description: TX0 MU channel + - description: TX1 MU channel + - description: TX2 MU channel + - description: TX3 MU channel + - description: RX0 MU channel + - description: RX1 MU channel + - description: RX2 MU channel + - description: RX3 MU channel + - description: optional MU channel for general interrupt + + mbox-names: + oneOf: + - items: + - const: tx0 + - const: rx0 + - items: + - const: tx0 + - const: rx0 + - const: gip3 + - items: + - const: tx0 + - const: tx1 + - const: tx2 + - const: tx3 + - const: rx0 + - const: rx1 + - const: rx2 + - const: rx3 + - items: + - const: tx0 + - const: tx1 + - const: tx2 + - const: tx3 + - const: rx0 + - const: rx1 + - const: rx2 + - const: rx3 + - const: gip3 + + pinctrl: + description: + Pin controller provided by the SCU + $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml + + power-controller: + description: + Power domains controller node that provides the power domains + controlled by the SCU + $ref: /schemas/power/fsl,scu-pd.yaml + + rtc: + description: + RTC controller provided by the SCU + $ref: /schemas/rtc/fsl,scu-rtc.yaml + + thermal-sensor: + description: + Thermal sensor provided by the SCU + $ref: /schemas/thermal/fsl,scu-thermal.yaml + + watchdog: + description: + Watchdog controller provided by the SCU + $ref: /schemas/watchdog/fsl,scu-wdt.yaml + +required: + - compatible + - mbox-names + - mboxes + +additionalProperties: false + +examples: + - | + #include + #include + #include + + firmware { + system-controller { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3", + "gip3"; + mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3 + &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3 + &lsio_mu1 3 3>; + + clock-controller { + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; + #clock-cells = <2>; + }; + + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + }; + + ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + }; + + power-controller { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; + + keys { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = ; + }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; + + thermal-sensor { + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 0f4e5ab..b3f702c 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -23,10 +23,13 @@ Required properties: * "qcom,scm-msm8994" * "qcom,scm-msm8996" * "qcom,scm-msm8998" + * "qcom,scm-qcs404" * "qcom,scm-sc7180" * "qcom,scm-sc7280" + * "qcom,scm-sm6125" * "qcom,scm-sdm845" * "qcom,scm-sdx55" + * "qcom,scm-sdx65" * "qcom,scm-sm6350" * "qcom,scm-sm8150" * "qcom,scm-sm8250" @@ -43,6 +46,7 @@ Required properties: clock and "bus" for the bus clock per the requirements of the compatible. - qcom,dload-mode: phandle to the TCSR hardware block and offset of the download mode control register (optional) +- interconnects: Specifies the bandwidth requirements of the SCM interface (optional) Example for MSM8916: diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml index 378da26..29c27ea 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml @@ -11,7 +11,11 @@ maintainers: properties: compatible: - const: xlnx,zynq-gpio-1.0 + enum: + - xlnx,zynq-gpio-1.0 + - xlnx,zynqmp-gpio-1.0 + - xlnx,versal-gpio-1.0 + - xlnx,pmc-gpio-1.0 reg: maxItems: 1 @@ -24,6 +28,11 @@ properties: gpio-controller: true + gpio-line-names: + description: strings describing the names of each gpio line + minItems: 58 + maxItems: 174 + interrupt-controller: true "#interrupt-cells": @@ -32,6 +41,54 @@ properties: clocks: maxItems: 1 + power-domains: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + enum: + - xlnx,zynqmp-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 174 + maxItems: 174 + + - if: + properties: + compatible: + enum: + - xlnx,zynq-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 118 + maxItems: 118 + + - if: + properties: + compatible: + enum: + - xlnx,versal-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 58 + maxItems: 58 + + - if: + properties: + compatible: + enum: + - xlnx,pmc-gpio-1.0 + then: + properties: + gpio-line-names: + minItems: 116 + maxItems: 116 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml similarity index 85% rename from Documentation/devicetree/bindings/arm/renesas,prr.yaml rename to Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml index 1f80767..792f371 100644 --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml +++ b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml @@ -1,7 +1,7 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/renesas,prr.yaml# +$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Product Register diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml index b046578..e171983 100644 --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -16,6 +16,7 @@ properties: - adi,adm1032 - adi,adt7461 - adi,adt7461a + - adi,adt7481 - dallas,max6646 - dallas,max6647 - dallas,max6649 @@ -50,6 +51,12 @@ properties: "#thermal-sensor-cells": const: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + vcc-supply: description: phandle to the regulator that provides the +VCC supply @@ -61,6 +68,29 @@ required: - compatible - reg +patternProperties: + "^channel@([0-2])$": + type: object + description: Represents channels of the device and their specific configuration. + + properties: + reg: + description: The channel number. 0 is local channel, 1-2 are remote channels. + items: + minimum: 0 + maximum: 2 + + label: + description: A descriptive name for this channel, like "ambient" or "psu". + + temperature-offset-millicelsius: + description: Temperature offset to be added to or subtracted from remote temperature measurements. + + required: + - reg + + additionalProperties: false + allOf: - if: not: @@ -70,12 +100,84 @@ allOf: enum: - adi,adt7461 - adi,adt7461a + - adi,adt7481 - ti,tmp451 - ti,tmp461 then: properties: ti,extended-range-enable: false + - if: + properties: + compatible: + contains: + enum: + - dallas,max6646 + - dallas,max6647 + - dallas,max6649 + - dallas,max6657 + - dallas,max6658 + - dallas,max6659 + - dallas,max6695 + - dallas,max6696 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adt7461 + - adi,adt7461a + - adi,adt7481 + - onnn,nct1008 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: + maximum: 127750 + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1032 + - dallas,max6680 + - dallas,max6681 + - gmt,g781 + - national,lm86 + - national,lm89 + - national,lm90 + - national,lm99 + - nxp,sa56004 + - winbond,w83l771 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: + maximum: 127875 + + - if: + properties: + compatible: + contains: + enum: + - ti,tmp451 + - ti,tmp461 + then: + patternProperties: + "^channel@([0-2])$": + properties: + temperature-offset-millicelsius: + maximum: 127937 + additionalProperties: false examples: @@ -94,3 +196,32 @@ examples: #thermal-sensor-cells = <1>; }; }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + label = "front"; + temperature-offset-millicelsius = <4000>; + }; + + channel@2 { + reg = <0x2>; + label = "back"; + temperature-offset-millicelsius = <750>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml index fe0ac08..0e8ddf0 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml @@ -40,9 +40,8 @@ properties: value to be used for converting remote channel measurements to temperature. $ref: /schemas/types.yaml#/definitions/int32 - items: - minimum: -128 - maximum: 127 + minimum: -128 + maximum: 127 ti,beta-compensation: description: diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt index 9c27ed6..4a4df4ffc 100644 --- a/Documentation/devicetree/bindings/hwmon/vexpress.txt +++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt @@ -9,7 +9,7 @@ Requires node properties: "arm,vexpress-power" "arm,vexpress-energy" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Optional node properties: diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index f771c09..0ec033e 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -21,10 +21,18 @@ properties: - enum: - allwinner,sun8i-a23-i2c - allwinner,sun8i-a83t-i2c + - allwinner,sun8i-v536-i2c - allwinner,sun50i-a64-i2c - - allwinner,sun50i-a100-i2c - allwinner,sun50i-h6-i2c + - const: allwinner,sun6i-a31-i2c + - description: Allwinner SoCs with offload support + items: + - enum: + - allwinner,sun20i-d1-i2c + - allwinner,sun50i-a100-i2c - allwinner,sun50i-h616-i2c + - allwinner,sun50i-r329-i2c + - const: allwinner,sun8i-v536-i2c - const: allwinner,sun6i-a31-i2c - const: marvell,mv64xxx-i2c - const: marvell,mv78230-i2c diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml new file mode 100644 index 0000000..e6266d1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + items: + - const: fsl,imx8qxp-sc-key + - const: fsl,imx-sc-key + + linux,keycodes: + maxItems: 1 + +required: + - compatible + - linux,keycodes + +additionalProperties: false + +examples: + - | + #include + + keys { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = ; + }; diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml new file mode 100644 index 0000000..449c7c9 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling + +maintainers: + - Jia-Wei Chang + - Johnson Wang + +description: | + MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by + MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in + hardware. It can also optimize the voltage to reduce the power consumption. + +properties: + compatible: + enum: + - mediatek,mt8183-cci + - mediatek,mt8186-cci + + clocks: + items: + - description: + The multiplexer for clock input of the bus. + - description: + A parent of "bus" clock which is used as an intermediate clock source + when the original clock source (PLL) is under transition and not + stable yet. + + clock-names: + items: + - const: cci + - const: intermediate + + operating-points-v2: true + opp-table: true + + proc-supply: + description: + Phandle of the regulator for CCI that provides the supply voltage. + + sram-supply: + description: + Phandle of the regulator for sram of CCI that provides the supply + voltage. When it is present, the implementation needs to do + "voltage tracking" to step by step scale up/down Vproc and Vsram to fit + SoC specific needs. When absent, the voltage scaling flow is handled by + hardware, hence no software "voltage tracking" is needed. + +required: + - compatible + - clocks + - clock-names + - operating-points-v2 + - proc-supply + +additionalProperties: false + +examples: + - | + #include + cci: cci { + compatible = "mediatek,mt8183-cci"; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cci", "intermediate"; + operating-points-v2 = <&cci_opp>; + proc-supply = <&mt6358_vproc12_reg>; + }; + + cci_opp: opp-table-cci { + compatible = "operating-points-v2"; + opp-shared; + opp2_00: opp-273000000 { + opp-hz = /bits/ 64 <273000000>; + opp-microvolt = <650000>; + }; + opp2_01: opp-338000000 { + opp-hz = /bits/ 64 <338000000>; + opp-microvolt = <687500>; + }; + opp2_02: opp-403000000 { + opp-hz = /bits/ 64 <403000000>; + opp-microvolt = <718750>; + }; + opp2_03: opp-463000000 { + opp-hz = /bits/ 64 <463000000>; + opp-microvolt = <756250>; + }; + opp2_04: opp-546000000 { + opp-hz = /bits/ 64 <546000000>; + opp-microvolt = <800000>; + }; + opp2_05: opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <818750>; + }; + opp2_06: opp-689000000 { + opp-hz = /bits/ 64 <689000000>; + opp-microvolt = <850000>; + }; + opp2_07: opp-767000000 { + opp-hz = /bits/ 64 <767000000>; + opp-microvolt = <868750>; + }; + opp2_08: opp-845000000 { + opp-hz = /bits/ 64 <845000000>; + opp-microvolt = <893750>; + }; + opp2_09: opp-871000000 { + opp-hz = /bits/ 64 <871000000>; + opp-microvolt = <906250>; + }; + opp2_10: opp-923000000 { + opp-hz = /bits/ 64 <923000000>; + opp-microvolt = <931250>; + }; + opp2_11: opp-962000000 { + opp-hz = /bits/ 64 <962000000>; + opp-microvolt = <943750>; + }; + opp2_12: opp-1027000000 { + opp-hz = /bits/ 64 <1027000000>; + opp-microvolt = <975000>; + }; + opp2_13: opp-1092000000 { + opp-hz = /bits/ 64 <1092000000>; + opp-microvolt = <1000000>; + }; + opp2_14: opp-1144000000 { + opp-hz = /bits/ 64 <1144000000>; + opp-microvolt = <1025000>; + }; + opp2_15: opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1050000>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml new file mode 100644 index 0000000..c2e697f --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Interconnect Bandwidth Monitor + +maintainers: + - Krzysztof Kozlowski + +description: | + Bandwidth Monitor measures current throughput on buses between various NoC + fabrics and provides information when it crosses configured thresholds. + + Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845:: + - Measuring the bandwidth between CPUs and Last Level Cache Controller - + called just BWMON, + - Measuring the bandwidth between Last Level Cache Controller and memory + (DDR) - called LLCC BWMON. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sdm845-bwmon + - const: qcom,msm8998-bwmon + - const: qcom,msm8998-bwmon # BWMON v4 + + interconnects: + maxItems: 1 + + interrupts: + maxItems: 1 + + operating-points-v2: true + opp-table: true + + reg: + # BWMON v4 (currently described) and BWMON v5 use one register address + # space. BWMON v2 uses two register spaces - not yet described. + maxItems: 1 + +required: + - compatible + - interconnects + - interrupts + - operating-points-v2 + - opp-table + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + pmu@1436400 { + compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + reg = <0x01436400 0x600>; + interrupts = ; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-0 { + opp-peak-kBps = <4800000>; + }; + opp-1 { + opp-peak-kBps = <9216000>; + }; + opp-2 { + opp-peak-kBps = <15052800>; + }; + opp-3 { + opp-peak-kBps = <20889600>; + }; + opp-4 { + opp-peak-kBps = <25497600>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml new file mode 100644 index 0000000..ad9ed59 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml @@ -0,0 +1,290 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Bus and Interconnect + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + The Samsung Exynos SoC has many buses for data transfer between DRAM and + sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses. + Generally, each bus of Exynos SoC includes a source clock and a power line, + which are able to change the clock frequency of the bus in runtime. To + monitor the usage of each bus in runtime, the driver uses the PPMU (Platform + Performance Monitoring Unit), which is able to measure the current load of + sub-blocks. + + The Exynos SoC includes the various sub-blocks which have the each AXI bus. + The each AXI bus has the owned source clock but, has not the only owned power + line. The power line might be shared among one more sub-blocks. So, we can + divide into two type of device as the role of each sub-block. There are two + type of bus devices as following:: + - parent bus device + - passive bus device + + Basically, parent and passive bus device share the same power line. The + parent bus device can only change the voltage of shared power line and the + rest bus devices (passive bus device) depend on the decision of the parent + bus device. If there are three blocks which share the VDD_xxx power line, + Only one block should be parent device and then the rest blocks should depend + on the parent device as passive device. + + VDD_xxx |--- A block (parent) + |--- B block (passive) + |--- C block (passive) + + There are a little different composition among Exynos SoC because each Exynos + SoC has different sub-blocks. Therefore, such difference should be specified + in devicetree file instead of each device driver. In result, this driver is + able to support the bus frequency for all Exynos SoCs. + + Detailed correlation between sub-blocks and power line according + to Exynos SoC:: + - In case of Exynos3250, there are two power line as following:: + VDD_MIF |--- DMC (Dynamic Memory Controller) + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC + |--- G3D + |--- RIGHTBUS + |--- PERIR + |--- FSYS + |--- LCD0 + |--- PERIR + |--- ISP + |--- CAM + + - MIF bus's frequency/voltage table + ----------------------- + |Lv| Freq | Voltage | + ----------------------- + |L1| 50000 |800000 | + |L2| 100000 |800000 | + |L3| 134000 |800000 | + |L4| 200000 |825000 | + |L5| 400000 |875000 | + ----------------------- + + - INT bus's frequency/voltage table + ---------------------------------------------------------- + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | + | name| |LCD0 | | | || | + | | |FSYS | | | || | + | | |MFC | | | || | + ---------------------------------------------------------- + |Mode |*parent|passive |passive|passive|passive|| | + ---------------------------------------------------------- + |Lv |Frequency ||Voltage | + ---------------------------------------------------------- + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | + |L4 |134000 |134000 |200000 |200000 | ||1000000 | + |L5 |200000 |200000 |400000 |300000 | ||1000000 | + ---------------------------------------------------------- + + - In case of Exynos4210, there is one power line as following:: + VDD_INT |--- DMC (parent device, Dynamic Memory Controller) + |--- LEFTBUS + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- LCD0 + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- LCD1 + + - In case of Exynos4x12, there are two power line as following:: + VDD_MIF |--- DMC (Dynamic Memory Controller) + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- IMAGE + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- ISP + + - In case of Exynos5422, there are two power line as following:: + VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) + |--- DREX 1 + + VDD_INT |--- NoC_Core (parent device) + |--- G2D + |--- G3D + |--- DISP1 + |--- NoC_WCORE + |--- GSCL + |--- MSCL + |--- ISP + |--- MFC + |--- GEN + |--- PERIS + |--- PERIC + |--- FSYS + |--- FSYS2 + + - In case of Exynos5433, there is VDD_INT power line as following:: + VDD_INT |--- G2D (parent device) + |--- MSCL + |--- GSCL + |--- JPEG + |--- MFC + |--- HEVC + |--- BUS0 + |--- BUS1 + |--- BUS2 + |--- PERIS (Fixed clock rate) + |--- PERIC (Fixed clock rate) + |--- FSYS (Fixed clock rate) + +properties: + compatible: + enum: + - samsung,exynos-bus + + clocks: + maxItems: 1 + + clock-names: + items: + - const: bus + + devfreq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Parent bus device. Valid and required only for the passive bus devices. + + devfreq-events: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: + Devfreq-event device to monitor the current utilization of buses. Valid + and required only for the parent bus devices. + + exynos,saturation-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Percentage value which is used to calibrate the performance count against + total cycle count. Valid only for the parent bus devices. + + '#interconnect-cells': + const: 0 + + interconnects: + minItems: 1 + maxItems: 2 + + operating-points-v2: true + + samsung,data-clock-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + description: + Ratio of the data throughput in B/s to minimum data clock frequency in + Hz. + + vdd-supply: + description: + Main bus power rail. Valid and required only for the parent bus devices. + +required: + - compatible + - clocks + - clock-names + - operating-points-v2 + +additionalProperties: false + +examples: + - | + #include + + bus-dmc { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_dmc CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + }; + + ppmu_dmc0: ppmu@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; + }; + + bus_leftbus: bus-leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + }; + + bus-rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + devfreq = <&bus_leftbus>; + }; + + - | + dmc: bus-dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + samsung,data-clock-ratio = <4>; + #interconnect-cells = <0>; + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + }; + + leftbus: bus-leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + interconnects = <&dmc>; + #interconnect-cells = <0>; + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + }; + + display: bus-display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACLK_266>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + interconnects = <&leftbus &dmc>; + #interconnect-cells = <0>; + devfreq = <&leftbus>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml new file mode 100644 index 0000000..33b90e9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55) + +maintainers: + - Lad Prabhakar + - Geert Uytterhoeven + +description: | + IA55 performs various interrupt controls including synchronization for the external + interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral + interrupts output by each IP. And it notifies the interrupt to the GIC + - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts + - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts + - NMI edge select (NMI is not treated as NMI exception and supports fall edge and + stand-up edge detection interrupts) + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-irqc # RZ/G2{L,LC} + - renesas,r9a07g054-irqc # RZ/V2L + - const: renesas,rzg2l-irqc + + '#interrupt-cells': + description: The first cell should contain external interrupt number (IRQ0-7) and the + second cell is used to specify the flag. + const: 2 + + '#address-cells': + const: 0 + + interrupt-controller: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 41 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: clk + - const: pclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - '#interrupt-cells' + - '#address-cells' + - interrupt-controller + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + +unevaluatedProperties: false + +examples: + - | + #include + #include + + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; + reg = <0x110a0000 0x10000>; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, + <&cpg CPG_MOD R9A07G044_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_IA55_RESETN>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 27092c6..92e0f8c 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -26,9 +26,14 @@ description: with priority below this threshold will not cause the PLIC to raise its interrupt line leading to the context. - While the PLIC supports both edge-triggered and level-triggered interrupts, - interrupt handlers are oblivious to this distinction and therefore it is not - specified in the PLIC device-tree binding. + The PLIC supports both edge-triggered and level-triggered interrupts. For + edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges + seen while an interrupt handler is active; the PLIC may either queue them or + ignore them. In the first case, handlers are oblivious to the trigger type, so + it is not included in the interrupt specifier. In the second case, software + needs to know the trigger type, so it can reorder the interrupt flow to avoid + missing interrupts. This special handling is needed by at least the Renesas + RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC. While the RISC-V ISA doesn't specify a memory layout for the PLIC, the "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that @@ -49,6 +54,10 @@ properties: oneOf: - items: - enum: + - renesas,r9a07g043-plic + - const: andestech,nceplic100 + - items: + - enum: - sifive,fu540-c000-plic - starfive,jh7100-plic - canaan,k210-plic @@ -64,8 +73,7 @@ properties: '#address-cells': const: 0 - '#interrupt-cells': - const: 1 + '#interrupt-cells': true interrupt-controller: true @@ -82,6 +90,12 @@ properties: description: Specifies how many external interrupts are supported by this controller. + clocks: true + + power-domains: true + + resets: true + required: - compatible - '#address-cells' @@ -91,6 +105,47 @@ required: - interrupts-extended - riscv,ndev +allOf: + - if: + properties: + compatible: + contains: + enum: + - andestech,nceplic100 + - thead,c900-plic + + then: + properties: + '#interrupt-cells': + const: 2 + + else: + properties: + '#interrupt-cells': + const: 1 + + - if: + properties: + compatible: + contains: + const: renesas,r9a07g043-plic + + then: + properties: + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + required: + - clocks + - power-domains + - resets + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml index f89ebde..de7c5e5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml @@ -30,6 +30,7 @@ properties: - socionext,uniphier-ld11-aidet - socionext,uniphier-ld20-aidet - socionext,uniphier-pxs3-aidet + - socionext,uniphier-nx1-aidet reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml new file mode 100644 index 0000000..bd0021d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 SoC Interrupt Controller + +maintainers: + - Qin Jian + +properties: + compatible: + items: + - const: sunplus,sp7021-intc + + reg: + maxItems: 2 + description: + Specifies base physical address(s) and size of the controller regs. + The 1st region include type/polarity/priority/mask regs. + The 2nd region include clear/masked_ext0/masked_ext1/group regs. + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger + type as defined in interrupt.txt in this directory. + + interrupts: + maxItems: 2 + description: + EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt + controller. + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include + + intc: interrupt-controller@9c000780 { + compatible = "sunplus,sp7021-intc"; + reg = <0x9c000780 0x80>, <0x9c000a80 0x80>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , /* EXT_INT0 */ + ; /* EXT_INT1 */ + }; + +... diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml new file mode 100644 index 0000000..be1539d --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xen specific IOMMU for virtualized devices (e.g. virtio) + +maintainers: + - Stefano Stabellini + +description: + The Xen IOMMU represents the Xen grant table interface. Grant mappings + are to be used with devices connected to the Xen IOMMU using the "iommus" + property, which also specifies the ID of the backend domain. + The binding is required to restrict memory access using Xen grant mappings. + +properties: + compatible: + const: xen,grant-dma + + '#iommu-cells': + const: 1 + description: + The single cell is the domid (domain ID) of the domain where the backend + is running. + +required: + - compatible + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + iommu { + compatible = "xen,grant-dma"; + #iommu-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml index a98b359..71bc5ce 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml @@ -32,6 +32,7 @@ properties: - mediatek,mt2701-smi-common - mediatek,mt2712-smi-common - mediatek,mt6779-smi-common + - mediatek,mt6795-smi-common - mediatek,mt8167-smi-common - mediatek,mt8173-smi-common - mediatek,mt8183-smi-common diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml index c886681..59dcd16 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml @@ -20,6 +20,7 @@ properties: - mediatek,mt2701-smi-larb - mediatek,mt2712-smi-larb - mediatek,mt6779-smi-larb + - mediatek,mt6795-smi-larb - mediatek,mt8167-smi-larb - mediatek,mt8173-smi-larb - mediatek,mt8183-smi-larb diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index c7cfa6c..935d63d 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -150,7 +150,6 @@ allOf: description: 5 memory controller channels and 1 for stream-id registers reg-names: - maxItems: 6 items: - const: sid - const: broadcast @@ -170,7 +169,6 @@ allOf: description: 17 memory controller channels and 1 for stream-id registers reg-names: - minItems: 18 items: - const: sid - const: broadcast @@ -202,7 +200,6 @@ allOf: description: 17 memory controller channels and 1 for stream-id registers reg-names: - minItems: 18 items: - const: sid - const: broadcast diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml index 74a6867..edac14a 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. maintainers: - - Luca Ceresoli + - Luca Ceresoli description: | MAX77714 is a Power Management IC with 4 buck regulators, 9 diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml index b672202..5ecdac9 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -75,7 +75,6 @@ examples: sd-uhs-sdr104; sdhci,auto-cmd12; interrupts = <0x0 0x26 0x4>; - interrupt-names = "sdio0_0"; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; }; @@ -94,7 +93,6 @@ examples: non-removable; bus-width = <0x8>; interrupts = <0x0 0x27 0x4>; - interrupt-names = "sdio1_0"; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml index c79639e..3ee7588 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -56,6 +56,9 @@ properties: - const: core - const: axi + interrupts: + maxItems: 1 + marvell,xenon-sdhc-id: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 @@ -145,7 +148,6 @@ allOf: items: - description: Xenon IP registers - description: Armada 3700 SoC PHY PAD Voltage Control register - minItems: 2 marvell,pad-type: $ref: /schemas/types.yaml#/definitions/string diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 6a4831f..55fc620 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -22,6 +22,7 @@ properties: - enum: - allwinner,sun20i-d1-emac - allwinner,sun50i-h6-emac + - allwinner,sun50i-h616-emac0 - const: allwinner,sun50i-a64-emac reg: diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 4f15463..170cd20 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -167,70 +167,65 @@ properties: - in-band-status fixed-link: - allOf: - - if: - type: array - then: - deprecated: true - items: - - minimum: 0 - maximum: 31 - description: - Emulated PHY ID, choose any but unique to the all - specified fixed-links - - - enum: [0, 1] - description: - Duplex configuration. 0 for half duplex or 1 for - full duplex - - - enum: [10, 100, 1000, 2500, 10000] - description: - Link speed in Mbits/sec. - - - enum: [0, 1] - description: - Pause configuration. 0 for no pause, 1 for pause - - - enum: [0, 1] - description: - Asymmetric pause configuration. 0 for no asymmetric - pause, 1 for asymmetric pause - - - - if: - type: object - then: - properties: - speed: - description: - Link speed. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [10, 100, 1000, 2500, 10000] - - full-duplex: - $ref: /schemas/types.yaml#/definitions/flag - description: - Indicates that full-duplex is used. When absent, half - duplex is assumed. - - pause: - $ref: /schemas/types.yaml#definitions/flag - description: - Indicates that pause should be enabled. - - asym-pause: - $ref: /schemas/types.yaml#/definitions/flag - description: - Indicates that asym_pause should be enabled. - - link-gpios: - maxItems: 1 - description: - GPIO to determine if the link is up - - required: - - speed + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true + items: + - minimum: 0 + maximum: 31 + description: + Emulated PHY ID, choose any but unique to the all + specified fixed-links + + - enum: [0, 1] + description: + Duplex configuration. 0 for half duplex or 1 for + full duplex + + - enum: [10, 100, 1000, 2500, 10000] + description: + Link speed in Mbits/sec. + + - enum: [0, 1] + description: + Pause configuration. 0 for no pause, 1 for pause + + - enum: [0, 1] + description: + Asymmetric pause configuration. 0 for no asymmetric + pause, 1 for asymmetric pause + - type: object + additionalProperties: false + properties: + speed: + description: + Link speed. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 100, 1000, 2500, 10000] + + full-duplex: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that full-duplex is used. When absent, half + duplex is assumed. + + pause: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that pause should be enabled. + + asym-pause: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that asym_pause should be enabled. + + link-gpios: + maxItems: 1 + description: + GPIO to determine if the link is up + + required: + - speed additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index daa2f79..1b18530 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -183,6 +183,7 @@ properties: Should specify the gpio for phy reset. phy-reset-duration: + $ref: /schemas/types.yaml#/definitions/uint32 deprecated: true description: Reset duration in milliseconds. Should present only if property @@ -191,12 +192,14 @@ properties: and 1 millisecond will be used instead. phy-reset-active-high: + type: boolean deprecated: true description: If present then the reset sequence using the GPIO specified in the "phy-reset-gpios" property is reversed (H=reset state, L=operation state). phy-reset-post-delay: + $ref: /schemas/types.yaml#/definitions/uint32 deprecated: true description: Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml new file mode 100644 index 0000000..2d33bbab --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 MII converter + +maintainers: + - Clément Léger + +description: | + This MII converter is present on the Renesas RZ/N1 SoC family. It is + responsible to do MII passthrough or convert it to RMII/RGMII. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + items: + - enum: + - renesas,r9a06g032-miic + - const: renesas,rzn1-miic + + reg: + maxItems: 1 + + clocks: + items: + - description: MII reference clock + - description: RGMII reference clock + - description: RMII reference clock + - description: AHB clock used for the MII converter register interface + + clock-names: + items: + - const: mii_ref + - const: rgmii_ref + - const: rmii_ref + - const: hclk + + renesas,miic-switch-portin: + description: MII Switch PORTIN configuration. This value should use one of + the values defined in dt-bindings/net/pcs-rzn1-miic.h. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + + power-domains: + maxItems: 1 + +patternProperties: + "^mii-conv@[0-5]$": + type: object + description: MII converter port + + properties: + reg: + description: MII Converter port number. + enum: [1, 2, 3, 4, 5] + + renesas,miic-input: + description: Converter input port configuration. This value should use + one of the values defined in dt-bindings/net/pcs-rzn1-miic.h. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - renesas,miic-input + + additionalProperties: false + + allOf: + - if: + properties: + reg: + const: 1 + then: + properties: + renesas,miic-input: + const: 0 + - if: + properties: + reg: + const: 2 + then: + properties: + renesas,miic-input: + enum: [1, 11] + - if: + properties: + reg: + const: 3 + then: + properties: + renesas,miic-input: + enum: [7, 10] + - if: + properties: + reg: + const: 4 + then: + properties: + renesas,miic-input: + enum: [4, 6, 9, 13] + - if: + properties: + reg: + const: 5 + then: + properties: + renesas,miic-input: + enum: [3, 5, 8, 12] + +required: + - '#address-cells' + - '#size-cells' + - compatible + - reg + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + + eth-miic@44030000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic"; + reg = <0x44030000 0x10000>; + clocks = <&sysctrl R9A06G032_CLK_MII_REF>, + <&sysctrl R9A06G032_CLK_RGMII_REF>, + <&sysctrl R9A06G032_CLK_RMII_REF>, + <&sysctrl R9A06G032_HCLK_SWITCH_RG>; + clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; + renesas,miic-switch-portin = ; + power-domains = <&sysctrl>; + + mii_conv1: mii-conv@1 { + renesas,miic-input = ; + reg = <1>; + }; + + mii_conv2: mii-conv@2 { + renesas,miic-input = ; + reg = <2>; + }; + + mii_conv3: mii-conv@3 { + renesas,miic-input = ; + reg = <3>; + }; + + mii_conv4: mii-conv@4 { + renesas,miic-input = ; + reg = <4>; + }; + + mii_conv5: mii-conv@5 { + renesas,miic-input = ; + reg = <5>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml index 8cd0adb..7029cb1 100644 --- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Atheros ath9k wireless devices Generic Binding maintainers: - - Kalle Valo + - Toke Høiland-Jørgensen description: | This node provides properties for configuring the ath9k wireless device. diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 8c01fdb..a677b05 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -9,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies ath11k wireless devices Generic Binding maintainers: - - Kalle Valo + - Kalle Valo description: | These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml index ddff9233..34dd1cc 100644 --- a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml +++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml @@ -55,7 +55,6 @@ properties: maxItems: 1 apple,sart: - maxItems: 1 $ref: /schemas/types.yaml#/definitions/phandle description: | Reference to the SART address filter. diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml new file mode 100644 index 0000000..6826882 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-scu-ocotp + - fsl,imx8qxp-scu-ocotp + +patternProperties: + '^mac@[0-9a-f]*$': + type: object + description: + MAC address. + + properties: + reg: + description: + Byte offset within OCOTP where the MAC address is stored + maxItems: 1 + + required: + - reg + + additionalProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt index de6a706..35f03df 100644 --- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt @@ -9,7 +9,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the whole phy and one for the port - reset-names : list of reset signal names. Should be "global" and "port" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 60dc278..b078009 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QMP USB3 DP PHY controller maintainers: - - Manu Gautam + - Wesley Cheng properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 0ab3dad..d68ab49 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm QUSB2 phy controller maintainers: - - Manu Gautam + - Wesley Cheng description: QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 1ce251d..7a0e6a9 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Qualcomm Synopsys Femto High-Speed USB PHY V2 maintainers: - - Wesley Cheng + - Wesley Cheng description: | Qualcomm High-Speed USB PHY diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index bfce850..0681b9a 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -127,20 +127,17 @@ patternProperties: additionalProperties: false - "^vcc-p[a-hlm]-supply$": + "^vcc-p[a-ilm]-supply$": description: Power supplies for pin banks. required: - "#gpio-cells" - - "#interrupt-cells" - compatible - reg - - interrupts - clocks - clock-names - gpio-controller - - interrupt-controller allOf: # FIXME: We should have the pin bank supplies here, but not a lot of @@ -149,6 +146,19 @@ allOf: - $ref: "pinctrl.yaml#" - if: + not: + properties: + compatible: + enum: + - allwinner,sun50i-h616-r-pinctrl + + then: + required: + - "#interrupt-cells" + - interrupts + - interrupt-controller + + - if: properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml new file mode 100644 index 0000000..45ea565 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the i.MX common pinctrl binding. + (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt) + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-iomuxc + - fsl,imx8qxp-iomuxc + - fsl,imx8dxl-iomuxc + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 3 integers and represents the pin ID, the mux value + and pad setting for the pin. The first 2 integers - pin_id and mux_val - are + specified using a PIN_FUNC_ID macro, which can be found in + . The last integer is + the pad setting value like pull-up on this pin. Please refer to the + appropriate i.MX8 Reference Manual for detailed pad CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "pin_id" indicates the pin ID + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + 111 0 0x06000020 + 112 0 0x06000020 + >; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index cbcbd31..939cb5b 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -27,7 +27,7 @@ Required properties: - pins: List of pins. Valid values of pins properties are: gpio0, gpio1. First 2 properties must be added in the RK805 PMIC node, documented in -Documentation/devicetree/bindings/mfd/rk808.txt +Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml Optional properties: ------------------- diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml index 4d820df..6f17f39 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -32,31 +32,37 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, spi, wdt, + # For MT7620 SoC - ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, - uartf, uartlite, wdt, wled, + ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk, + uartf, uartlite, wled, # For MT7628 and MT7688 SoCs - gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0, - pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, uart1, uart2, - wdt, wled_an, wled_kn, + pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2, + wled_an, wled_kn, ] function: description: The mux function to select. enum: [ + # common + gpio, i2c, refclk, spi, + # For MT7620 SoC - ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, - pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, refclk, - rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, wdt refclk, + ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa, + pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf, + rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk, wdt rst, wled, # For MT7628 and MT7688 SoCs - antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, + antenna, debug, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2, - refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, + rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -, ] diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml index 425401c..f602a5d 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -33,32 +33,29 @@ patternProperties: groups: description: The pin group to select. enum: [ + # common + i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite, + # For RT3050, RT3052 and RT3350 SoCs - i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf, - uartlite, - - # For RT5350 SoC - i2c, jtag, led, spi, spi_cs1, uartf, uartlite, + lna, pa ] function: description: The mux function to select. enum: [ + # common + gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio, + pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, + uartlite, wdg_cs1, + # For RT3050, RT3052 and RT3350 SoCs - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio, - pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite, + sdram, # For RT3352 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio, - pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf, - uartlite, wdg_cs1, - - # For RT5350 SoC - gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio, - pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1, + lna, pa ] required: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 52df1b1..997b746 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -47,6 +47,17 @@ properties: gpio-ranges: maxItems: 1 + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZG2L_GPIO() helper macro in and the + second cell is used to specify the flag. + E.g. "interrupts = ;" if P43_0 is + being used as an interrupt. + clocks: maxItems: 1 @@ -110,6 +121,8 @@ required: - gpio-controller - '#gpio-cells' - gpio-ranges + - interrupt-controller + - '#interrupt-cells' - clocks - power-domains - resets @@ -126,6 +139,8 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl 0 0 392>; + interrupt-controller; + #interrupt-cells = <2>; clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; resets = <&cpg R9A07G044_GPIO_RSTN>, <&cpg R9A07G044_GPIO_PORT_RESETN>, diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml new file mode 100644 index 0000000..1f72b18 --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + Power domain bindings based on SCU Message Protocol + +allOf: + - $ref: power-domain.yaml# + +properties: + compatible: + items: + - enum: + - fsl,imx8qm-scu-pd + - fsl,imx8qxp-scu-pd + - const: fsl,scu-pd + + '#power-domain-cells': + const: 1 + +required: + - compatible + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + power-controller { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index 135c6f7..b448101 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -23,6 +23,7 @@ properties: compatible: enum: + - mediatek,mt6795-power-controller - mediatek,mt8167-power-controller - mediatek,mt8173-power-controller - mediatek,mt8183-power-controller @@ -62,6 +63,7 @@ patternProperties: reg: description: | Power domain index. Valid values are defined in: + "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain. "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain. "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain. "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain. diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index ad77a63..0ccca49 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -18,6 +18,7 @@ properties: enum: - qcom,mdm9607-rpmpd - qcom,msm8226-rpmpd + - qcom,msm8909-rpmpd - qcom,msm8916-rpmpd - qcom,msm8939-rpmpd - qcom,msm8953-rpmpd diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml index 675b9b2..f23dcc5 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX77976 Battery charger maintainers: - - Luca Ceresoli + - Luca Ceresoli description: | The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger diff --git a/Documentation/devicetree/bindings/pwm/clk-pwm.yaml b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml new file mode 100644 index 0000000..ec17682 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/clk-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock based PWM controller + +maintainers: + - Nikita Travkin + +description: | + Some systems have clocks that can be exposed to external devices. + (e.g. by muxing them to GPIO pins) + It's often possible to control duty-cycle of such clocks which makes them + suitable for generating PWM signal. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: clk-pwm + + clocks: + description: Clock used to generate the signal. + maxItems: 1 + + "#pwm-cells": + const: 2 + +unevaluatedProperties: false + +required: + - compatible + - clocks + +examples: + - | + pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + clocks = <&gcc 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_clk_flash_default>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt index 033d1fc..554c96b 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt @@ -9,6 +9,8 @@ Required properties: - "mediatek,mt7628-pwm": found on mt7628 SoC. - "mediatek,mt7629-pwm": found on mt7629 SoC. - "mediatek,mt8183-pwm": found on mt8183 SoC. + - "mediatek,mt8195-pwm", "mediatek,mt8183-pwm": found on mt8195 SoC. + - "mediatek,mt8365-pwm": found on mt8365 SoC. - "mediatek,mt8516-pwm": found on mt8516 SoC. - reg: physical base address and length of the controller's registers. - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of @@ -18,6 +20,7 @@ Required properties: has no clocks - "top": the top clock generator - "main": clock used by the PWM core + - "pwm1-3": the three per PWM clocks for mt8365 - "pwm1-8": the eight per PWM clocks for mt2712 - "pwm1-6": the six per PWM clocks for mt7622 - "pwm1-5": the five per PWM clocks for mt7623 diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 90727fd..7023c59 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -15,6 +15,7 @@ properties: compatible: enum: - mps,mp5416 + - mps,mp5496 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt deleted file mode 100644 index 3d78d50..0000000 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ /dev/null @@ -1,92 +0,0 @@ -Bindings for the Generic PWM Regulator -====================================== - -Currently supports 2 modes of operation: - -Voltage Table: When in this mode, a voltage table (See below) of - predefined voltage <=> duty-cycle values must be - provided via DT. Limitations are that the regulator can - only operate at the voltages supplied in the table. - Intermediary duty-cycle values which would normally - allow finer grained voltage selection are ignored and - rendered useless. Although more control is given to - the user if the assumptions made in continuous-voltage - mode do not reign true. - -Continuous Voltage: This mode uses the regulator's maximum and minimum - supplied voltages specified in the - regulator-{min,max}-microvolt properties to calculate - appropriate duty-cycle values. This allows for a much - more fine grained solution when compared with - voltage-table mode above. This solution does make an - assumption that a %50 duty-cycle value will cause the - regulator voltage to run at half way between the - supplied max_uV and min_uV values. - -Required properties: --------------------- -- compatible: Should be "pwm-regulator" - -- pwms: PWM specification (See: ../pwm/pwm.txt) - -Only required for Voltage Table Mode: -- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells - First cell is voltage in microvolts (uV) - Second cell is duty-cycle in percent (%) - -Optional properties for Continuous mode: -- pwm-dutycycle-unit: Integer value encoding the duty cycle unit. If not - defined, <100> is assumed, meaning that - pwm-dutycycle-range contains values expressed in - percent. - -- pwm-dutycycle-range: Should contain 2 entries. The first entry is encoding - the dutycycle for regulator-min-microvolt and the - second one the dutycycle for regulator-max-microvolt. - Duty cycle values are expressed in pwm-dutycycle-unit. - If not defined, <0 100> is assumed. - -NB: To be clear, if voltage-table is provided, then the device will be used -in Voltage Table Mode. If no voltage-table is provided, then the device will -be used in Continuous Voltage Mode. - -Optional properties: --------------------- -- enable-gpios: GPIO to use to enable/disable the regulator - -Any property defined as part of the core regulator binding can also be used. -(See: ../regulator/regulator.txt) - -Continuous Voltage With Enable GPIO Example: - pwm_regulator { - compatible = "pwm-regulator"; - pwms = <&pwm1 0 8448 0>; - enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; - regulator-min-microvolt = <1016000>; - regulator-max-microvolt = <1114000>; - regulator-name = "vdd_logic"; - /* unit == per-mille */ - pwm-dutycycle-unit = <1000>; - /* - * Inverted PWM logic, and the duty cycle range is limited - * to 30%-70%. - */ - pwm-dutycycle-range = <700 300>; /* */ - }; - -Voltage Table Example: - pwm_regulator { - compatible = "pwm-regulator"; - pwms = <&pwm1 0 8448 0>; - regulator-min-microvolt = <1016000>; - regulator-max-microvolt = <1114000>; - regulator-name = "vdd_logic"; - - /* Voltage Duty-Cycle */ - voltage-table = <1114000 0>, - <1095000 10>, - <1076000 20>, - <1056000 30>, - <1036000 40>, - <1016000 50>; - }; diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml new file mode 100644 index 0000000..82b6f2f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bindings for the Generic PWM Regulator + +maintainers: + - Brian Norris + - Lee Jones + - Alexandre Courbot + +description: | + Currently supports 2 modes of operation: + + Voltage Table: + When in this mode, a voltage table (See below) of predefined voltage <=> + duty-cycle values must be provided via DT. Limitations are that the + regulator can only operate at the voltages supplied in the table. + Intermediary duty-cycle values which would normally allow finer grained + voltage selection are ignored and rendered useless. Although more control + is given to the user if the assumptions made in continuous-voltage mode do + not reign true. + + Continuous Voltage: + This mode uses the regulator's maximum and minimum supplied voltages + specified in the regulator-{min,max}-microvolt properties to calculate + appropriate duty-cycle values. This allows for a much more fine grained + solution when compared with voltage-table mode above. This solution does + make an assumption that a %50 duty-cycle value will cause the regulator + voltage to run at half way between the supplied max_uV and min_uV values. + + If voltage-table is provided, then the device will be used in Voltage Table + Mode. If no voltage-table is provided, then the device will be used in + Continuous Voltage Mode. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + const: pwm-regulator + + pwms: + maxItems: 1 + + voltage-table: + description: Voltage and Duty-Cycle table. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: voltage in microvolts (uV) + - description: duty-cycle in percent (%) + + enable-gpios: + description: Regulator enable GPIO + maxItems: 1 + + # Optional properties for Continuous mode: + pwm-dutycycle-unit: + description: + Integer value encoding the duty cycle unit. If not + defined, <100> is assumed, meaning that + pwm-dutycycle-range contains values expressed in + percent. + default: 100 + + pwm-dutycycle-range: + description: + Should contain 2 entries. The first entry is encoding + the dutycycle for regulator-min-microvolt and the + second one the dutycycle for regulator-max-microvolt. + Duty cycle values are expressed in pwm-dutycycle-unit. + If not defined, <0 100> is assumed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: the dutycycle for regulator-min-microvolt + - description: the dutycycle for regulator-max-microvolt + default: [ 0 100 ] + +required: + - compatible + - pwms + +unevaluatedProperties: false + +examples: + - | + #include + + // Continuous Voltage With Enable GPIO Example: + regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 8448 0>; + enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + /* unit == per-mille */ + pwm-dutycycle-unit = <1000>; + /* + * Inverted PWM logic, and the duty cycle range is limited + * to 30%-70%. + */ + pwm-dutycycle-range = <700 300>; /* */ + }; + + - | + // Voltage Table Example: + regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 8448 0>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + + /* Voltage Duty-Cycle */ + voltage-table = <1114000 0>, + <1095000 10>, + <1076000 20>, + <1056000 30>, + <1036000 40>, + <1016000 50>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index 6a9a7ee..c233461 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -30,6 +30,9 @@ description: For pm8841, s1, s2, s3, s4, s5, s6, s7, s8 + For pm8909, s1, s2, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l17, l18 + For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18 @@ -78,6 +81,7 @@ properties: - qcom,rpm-mp5496-regulators - qcom,rpm-pm8226-regulators - qcom,rpm-pm8841-regulators + - qcom,rpm-pm8909-regulators - qcom,rpm-pm8916-regulators - qcom,rpm-pm8941-regulators - qcom,rpm-pm8950-regulators diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt deleted file mode 100644 index c2a39b1..0000000 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ /dev/null @@ -1,347 +0,0 @@ -Qualcomm SPMI Regulators - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,pm8004-regulators" - "qcom,pm8005-regulators" - "qcom,pm8226-regulators" - "qcom,pm8841-regulators" - "qcom,pm8916-regulators" - "qcom,pm8941-regulators" - "qcom,pm8950-regulators" - "qcom,pm8994-regulators" - "qcom,pmi8994-regulators" - "qcom,pm660-regulators" - "qcom,pm660l-regulators" - "qcom,pms405-regulators" - -- interrupts: - Usage: optional - Value type: - Definition: List of OCP interrupts. - -- interrupt-names: - Usage: required if 'interrupts' property present - Value type: - Definition: List of strings defining the names of the - interrupts in the 'interrupts' property 1-to-1. - Supported values are "ocp-", where - corresponds to a voltage switch - type regulator. - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: - Usage: optional (pm8841 only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_l1_l3-supply: -- vdd_l2-supply: -- vdd_l4_l5_l6-supply: -- vdd_l7-supply: -- vdd_l8_l11_l14_l15_l16-supply: -- vdd_l9_l10_l12_l13_l17_l18-supply: - Usage: optional (pm8916 only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_l1_l3-supply: -- vdd_l2_lvs_1_2_3-supply: -- vdd_l4_l11-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l14_l15-supply: -- vdd_l8_l16_l18_19-supply: -- vdd_l9_l10_l17_l22-supply: -- vdd_l13_l20_l23_l24-supply: -- vdd_l21-supply: -- vin_5vs-supply: - Usage: optional (pm8941 only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_l1_l19-supply: -- vdd_l2_l23-supply: -- vdd_l3-supply: -- vdd_l4_l5_l6_l7_l16-supply: -- vdd_l8_l11_l12_l17_l22-supply: -- vdd_l9_l10_l13_l14_l15_l18-supply: -- vdd_l20-supply: -- vdd_l21-supply: - Usage: optional (pm8950 only) - Value type: - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vdd_s9-supply: -- vdd_s10-supply: -- vdd_s11-supply: -- vdd_s12-supply: -- vdd_l1-supply: -- vdd_l2_l26_l28-supply: -- vdd_l3_l11-supply: -- vdd_l4_l27_l31-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l32-supply: -- vdd_l8_l16_l30-supply: -- vdd_l9_l10_l18_l22-supply: -- vdd_l13_l19_l23_l24-supply: -- vdd_l14_l15-supply: -- vdd_l17_l29-supply: -- vdd_l20_l21-supply: -- vdd_l25-supply: -- vdd_lvs_1_2-supply: - Usage: optional (pm8994 only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_l1-supply: - Usage: optional (pmi8994 only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- vdd_l1_l6_l7-supply: -- vdd_l2_l3-supply: -- vdd_l5-supply: -- vdd_l8_l9_l10_l11_l12_l13_l14-supply: -- vdd_l15_l16_l17_l18_l19-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s5-supply: -- vdd_s6-supply: - Usage: optional (pm660 only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- vdd_l1_l9_l10-supply: -- vdd_l2-supply: -- vdd_l3_l5_l7_l8-supply: -- vdd_l4_l6-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: - Usage: optional (pm660l only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- vdd_l1_l2-supply: -- vdd_l3_l8-supply: -- vdd_l4-supply: -- vdd_l5_l6-supply: -- vdd_l10_l11_l12_l13-supply: -- vdd_l7-supply: -- vdd_l9-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply - Usage: optional (pms405 only) - Value type: - Definition: Reference to regulator supplying the input pin, as - described in the data sheet. - -- qcom,saw-reg: - Usage: optional - Value type: - Description: Reference to syscon node defining the SAW registers. - - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the PMICs below. - -pm8004: - s2, s5 - -pm8005: - s1, s2, s3, s4 - -pm8841: - s1, s2, s3, s4, s5, s6, s7, s8 - -pm8916: - s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, - l14, l15, l16, l17, l18 - -pm8941: - s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, - l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, - 5vs1, 5vs2 - -pm8994: - s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, - l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, - l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 - -pmi8994: - s1, s2, s3, l1 - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt - with additional custom properties described below: - -- regulator-initial-mode: - Usage: optional - Value type: - Description: 2 = Set initial mode to auto mode (automatically select - between HPM and LPM); not available on boost type - regulators. - - 1 = Set initial mode to high power mode (HPM), also referred - to as NPM. HPM consumes more ground current than LPM, but - it can source significantly higher load current. HPM is not - available on boost type regulators. For voltage switch type - regulators, HPM implies that over current protection and - soft start are active all the time. - - 0 = Set initial mode to low power mode (LPM). - -- qcom,ocp-max-retries: - Usage: optional - Value type: - Description: Maximum number of times to try toggling a voltage switch - off and back on as a result of consecutive over current - events. - -- qcom,ocp-retry-delay: - Usage: optional - Value type: - Description: Time to delay in milliseconds between each voltage switch - toggle after an over current event takes place. - -- qcom,pin-ctrl-enable: - Usage: optional - Value type: - Description: Bit mask specifying which hardware pins should be used to - enable the regulator, if any; supported bits are: - 0 = ignore all hardware enable signals - BIT(0) = follow HW0_EN signal - BIT(1) = follow HW1_EN signal - BIT(2) = follow HW2_EN signal - BIT(3) = follow HW3_EN signal - -- qcom,pin-ctrl-hpm: - Usage: optional - Value type: - Description: Bit mask specifying which hardware pins should be used to - force the regulator into high power mode, if any; - supported bits are: - 0 = ignore all hardware enable signals - BIT(0) = follow HW0_EN signal - BIT(1) = follow HW1_EN signal - BIT(2) = follow HW2_EN signal - BIT(3) = follow HW3_EN signal - BIT(4) = follow PMIC awake state - -- qcom,vs-soft-start-strength: - Usage: optional - Value type: - Description: This property sets the soft start strength for voltage - switch type regulators; supported values are: - 0 = 0.05 uA - 1 = 0.25 uA - 2 = 0.55 uA - 3 = 0.75 uA - -- qcom,saw-slave: - Usage: optional - Value type: - Description: SAW controlled gang slave. Will not be configured. - -- qcom,saw-leader: - Usage: optional - Value type: - Description: SAW controlled gang leader. Will be configured as - SAW regulator. - -Example: - - regulators { - compatible = "qcom,pm8941-regulators"; - vdd_l1_l3-supply = <&s1>; - - s1: s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1400000>; - }; - - ... - - l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1300000>; - }; - - .... - }; - -Example 2: - - saw3: syscon@9A10000 { - compatible = "syscon"; - reg = <0x9A10000 0x1000>; - }; - - ... - - spm-regulators { - compatible = "qcom,pm8994-regulators"; - qcom,saw-reg = <&saw3>; - s8 { - qcom,saw-slave; - }; - s9 { - qcom,saw-slave; - }; - s10 { - qcom,saw-slave; - }; - pm8994_s11_saw: s11 { - qcom,saw-leader; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1140000>; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml new file mode 100644 index 0000000..8b7c4af --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml @@ -0,0 +1,323 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Regulators + +maintainers: + - Robert Marko + +properties: + compatible: + enum: + - qcom,pm660-regulators + - qcom,pm660l-regulators + - qcom,pm8004-regulators + - qcom,pm8005-regulators + - qcom,pm8226-regulators + - qcom,pm8841-regulators + - qcom,pm8916-regulators + - qcom,pm8941-regulators + - qcom,pm8950-regulators + - qcom,pm8994-regulators + - qcom,pmi8994-regulators + - qcom,pmp8074-regulators + - qcom,pms405-regulators + + qcom,saw-reg: + description: Reference to syscon node defining the SAW registers + $ref: /schemas/types.yaml#/definitions/phandle + +patternProperties: + "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$": + description: List of regulators and its properties + type: object + $ref: regulator.yaml# + + properties: + qcom,ocp-max-retries: + description: + Maximum number of times to try toggling a voltage switch off and + back on as a result of consecutive over current events + $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,ocp-retry-delay: + description: + Time to delay in milliseconds between each voltage switch toggle + after an over current event takes place + $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,pin-ctrl-enable: + description: + Bit mask specifying which hardware pins should be used to enable the + regulator, if any. + Supported bits are + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + + qcom,pin-ctrl-hpm: + description: + Bit mask specifying which hardware pins should be used to force the + regulator into high power mode, if any. + Supported bits are + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + BIT(4) = follow PMIC awake state + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + + qcom,vs-soft-start-strength: + description: + This property sets the soft start strength for voltage switch type + regulators. + Supported values are + 0 = 0.05 uA + 1 = 0.25 uA + 2 = 0.55 uA + 3 = 0.75 uA + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + + qcom,saw-slave: + description: SAW controlled gang slave. Will not be configured. + type: boolean + + qcom,saw-leader: + description: + SAW controlled gang leader. Will be configured as SAW regulator. + type: boolean + + unevaluatedProperties: false + +required: + - compatible + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660-regulators + then: + properties: + vdd_l15_l16_l17_l18_l19-supply: true + vdd_l1_l6_l7-supply: true + vdd_l2_l3-supply: true + vdd_l5-supply: true + vdd_l8_l9_l10_l11_l12_l13_l14-supply: true + patternProperties: + "^vdd_s[1-6]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-regulators + then: + properties: + vdd_l1_l9_l10-supply: true + vdd_l2-supply: true + vdd_l3_l5_l7_l8-supply: true + vdd_l4_l6-supply: true + patternProperties: + "^vdd_s[1-5]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8004-regulators + then: + patternProperties: + "^vdd_s[25]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8005-regulators + then: + patternProperties: + "^vdd_s[1-4]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8226-regulators + then: + properties: + vdd_l10_l11_l13-supply: true + vdd_l12_l14-supply: true + vdd_l15_l16_l17_l18-supply: true + vdd_l19_l20_l21_l22_l23_l28-supply: true + vdd_l1_l2_l4_l5-supply: true + vdd_l25-supply: true + vdd_l3_l24_l26-supply: true + vdd_l6_l7_l8_l9_l27-supply: true + vdd_lvs1-supply: true + patternProperties: + "^vdd_s[1-5]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8841-regulators + then: + patternProperties: + "^vdd_s[1-8]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8916-regulators + then: + properties: + vdd_l1_l3-supply: true + vdd_l4_l5_l6-supply: true + vdd_l8_l11_l14_l15_l16-supply: true + vdd_l9_l10_l12_l13_l17_l18-supply: true + patternProperties: + "^vdd_l[27]-supply$": true + "^vdd_s[1-4]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-regulators + then: + properties: + interrupts: + items: + - description: Over-current protection interrupt for 5V S1 + - description: Over-current protection interrupt for 5V S2 + interrupt-names: + items: + - const: ocp-5vs1 + - const: ocp-5vs2 + vdd_l13_l20_l23_l24-supply: true + vdd_l1_l3-supply: true + vdd_l21-supply: true + vdd_l2_lvs_1_2_3-supply: true + vdd_l4_l11-supply: true + vdd_l5_l7-supply: true + vdd_l6_l12_l14_l15-supply: true + vdd_l8_l16_l18_19-supply: true + vdd_l9_l10_l17_l22-supply: true + vin_5vs-supply: true + patternProperties: + "^vdd_s[1-3]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8950-regulators + then: + properties: + vdd_l1_l19-supply: true + vdd_l20-supply: true + vdd_l21-supply: true + vdd_l2_l23-supply: true + vdd_l3-supply: true + vdd_l4_l5_l6_l7_l16-supply: true + vdd_l8_l11_l12_l17_l22-supply: true + vdd_l9_l10_l13_l14_l15_l18-supply: true + patternProperties: + "^vdd_s[1-6]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8994-regulators + then: + properties: + vdd_l1-supply: true + vdd_l13_l19_l23_l24-supply: true + vdd_l14_l15-supply: true + vdd_l17_l29-supply: true + vdd_l20_l21-supply: true + vdd_l25-supply: true + vdd_l2_l26_l28-supply: true + vdd_l3_l11-supply: true + vdd_l4_l27_l31-supply: true + vdd_l5_l7-supply: true + vdd_l6_l12_l32-supply: true + vdd_l8_l16_l30-supply: true + vdd_l9_l10_l18_l22-supply: true + vdd_lvs_1_2-supply: true + patternProperties: + "^vdd_s[1-9][0-2]?-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi8994-regulators + then: + properties: + vdd_l1-supply: true + patternProperties: + "^vdd_s[1-3]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pmp8074-regulators + then: + properties: + vdd_l10_l11_l12_l13-supply: true + vdd_l1_l2-supply: true + vdd_l3_l8-supply: true + vdd_l5_l6_l15-supply: true + patternProperties: + "^vdd_l[479]-supply$": true + "^vdd_s[1-5]-supply$": true + - if: + properties: + compatible: + contains: + enum: + - qcom,pms405-regulators + then: + properties: + vdd_s3-supply: true + +unevaluatedProperties: false + +examples: + - | + regulators { + compatible = "qcom,pm8941-regulators"; + vdd_l1_l3-supply = <&s1>; + + s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + }; + + l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 12ed98c..dbe78cd 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: The Qualcomm PMIC VBUS output regulator driver maintainers: - - Wesley Cheng + - Wesley Cheng description: | This regulator driver controls the VBUS output by the Qualcomm PMIC. This diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index a9b66ec..6e8aa9e 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -23,6 +23,7 @@ properties: regulator-microvolt-offset: description: Offset applied to voltages to compensate for voltage drops + $ref: "/schemas/types.yaml#/definitions/uint32" regulator-min-microamp: description: smallest current consumers may set diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt index d775f72..1c2e92c 100644 --- a/Documentation/devicetree/bindings/regulator/vexpress.txt +++ b/Documentation/devicetree/bindings/regulator/vexpress.txt @@ -4,7 +4,7 @@ Versatile Express voltage regulators Requires node properties: - "compatible" value: "arm,vexpress-volt" - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg - (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt + (see Documentation/devicetree/bindings/arm/vexpress-config.yaml for more details) Required regulator properties: diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml index fa5e4ea..d82e65e 100644 --- a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: nuvoton,npcm750-reset + enum: + - nuvoton,npcm750-reset # Poleg NPCM7XX SoC + - nuvoton,npcm845-reset # Arbel NPCM8XX SoC reg: maxItems: 1 @@ -19,6 +21,10 @@ properties: '#reset-cells': const: 2 + nuvoton,sysgcr: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to access GCR registers. + nuvoton,sw-reset-number: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 @@ -31,6 +37,7 @@ required: - compatible - reg - '#reset-cells' + - nuvoton,sysgcr additionalProperties: false @@ -41,6 +48,7 @@ examples: compatible = "nuvoton,npcm750-reset"; reg = <0xf0801000 0x70>; #reset-cells = <2>; + nuvoton,sysgcr = <&gcr>; nuvoton,sw-reset-number = <2>; }; diff --git a/Documentation/devicetree/bindings/reset/sunplus,reset.yaml b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml new file mode 100644 index 0000000..f24646b --- /dev/null +++ b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/sunplus,reset.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Sunplus SoC Reset Controller + +maintainers: + - Qin Jian + +properties: + compatible: + const: sunplus,sp7021-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rstc: reset@9c000054 { + compatible = "sunplus,sp7021-reset"; + reg = <0x9c000054 0x28>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml new file mode 100644 index 0000000..8c102b7 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/fsl,scu-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - RTC bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: fsl,imx8qxp-sc-rtc + +required: + - compatible + +additionalProperties: false + +examples: + - | + rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt deleted file mode 100644 index 72ff033..0000000 --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt +++ /dev/null @@ -1,46 +0,0 @@ -BCM2835 PM (Power domains, watchdog) - -The PM block controls power domains and some reset lines, and includes -a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt -binding which covered some of PM's register range and functionality. - -Required properties: - -- compatible: Should be "brcm,bcm2835-pm" -- reg: Specifies base physical address and size of the two - register ranges ("PM" and "ASYNC_BRIDGE" in that - order) -- clocks: a) v3d: The V3D clock from CPRMAN - b) peri_image: The PERI_IMAGE clock from CPRMAN - c) h264: The H264 clock from CPRMAN - d) isp: The ISP clock from CPRMAN -- #reset-cells: Should be 1. This property follows the reset controller - bindings[1]. -- #power-domain-cells: Should be 1. This property follows the power domain - bindings[2]. - -Optional properties: - -- timeout-sec: Contains the watchdog timeout in seconds -- system-power-controller: Whether the watchdog is controlling the - system power. This node follows the power controller bindings[3]. - -[1] Documentation/devicetree/bindings/reset/reset.txt -[2] Documentation/devicetree/bindings/power/power-domain.yaml -[3] Documentation/devicetree/bindings/power/power-controller.txt - -Example: - -pm { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; - #reset-cells = <1>; - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>; - clocks = <&clocks BCM2835_CLOCK_V3D>, - <&clocks BCM2835_CLOCK_PERI_IMAGE>, - <&clocks BCM2835_CLOCK_H264>, - <&clocks BCM2835_CLOCK_ISP>; - clock-names = "v3d", "peri_image", "h264", "isp"; - system-power-controller; -}; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml new file mode 100644 index 0000000..e28ef19 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 PM (Power domains, watchdog) + +description: | + The PM block controls power domains and some reset lines, and includes a + watchdog timer. + +maintainers: + - Nicolas Saenz Julienne + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + +properties: + compatible: + items: + - enum: + - brcm,bcm2835-pm + - brcm,bcm2711-pm + - const: brcm,bcm2835-pm-wdt + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: pm + - const: asb + - const: rpivid_asb + + "#power-domain-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: v3d + - const: peri_image + - const: h264 + - const: isp + + system-power-controller: + type: boolean + + timeout-sec: true + +required: + - compatible + - reg + - "#power-domain-cells" + - "#reset-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include + + watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + reg-names = "pm", "asb"; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml index 31e4d3c..d0a4bc3 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - mediatek,mt6779-devapc + - mediatek,mt8186-devapc reg: description: The base address of devapc register bank diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml similarity index 81% rename from Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml rename to Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml index 3fdad71..627dcc3 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mutex.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/display/mediatek/mediatek,mutex.yaml# +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek mutex @@ -55,6 +55,18 @@ properties: include/dt-bindings/gce/-gce.h of each chips. $ref: /schemas/types.yaml#/definitions/uint32-array + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/-gce.h. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml new file mode 100644 index 0000000..d911fa2 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Smart Voltage Scaling (SVS) Device Tree Bindings + +maintainers: + - Roger Lu + - Matthias Brugger + - Kevin Hilman + +description: |+ + The SVS engine is a piece of hardware which has several + controllers(banks) for calculating suitable voltage to + different power domains(CPU/GPU/CCI) according to + chip process corner, temperatures and other factors. Then DVFS + driver could apply SVS bank voltage to PMIC/Buck. + +properties: + compatible: + enum: + - mediatek,mt8183-svs + - mediatek,mt8192-svs + + reg: + maxItems: 1 + description: Address range of the MTK SVS controller. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Main clock for MTK SVS controller to work. + + clock-names: + const: main + + nvmem-cells: + minItems: 1 + description: + Phandle to the calibration data provided by a nvmem device. + items: + - description: SVS efuse for SVS controller + - description: Thermal efuse for SVS controller + + nvmem-cell-names: + items: + - const: svs-calibration-data + - const: t-calibration-data + + resets: + maxItems: 1 + + reset-names: + items: + - const: svs_rst + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 597d67f..33748a0 100644 --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Atmel Timer Counter Block @@ -75,7 +75,7 @@ patternProperties: "^pwm@[0-2]$": description: The timer block channels that are used as PWMs. - $ref: ../../pwm/pwm.yaml# + $ref: /schemas/pwm/pwm.yaml# type: object properties: compatible: diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml index b0dae51..04ffee3 100644 --- a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index e2e173d..d01e987 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -33,6 +33,7 @@ properties: - qcom,sm8150-aoss-qmp - qcom,sm8250-aoss-qmp - qcom,sm8350-aoss-qmp + - qcom,sm8450-aoss-qmp - const: qcom,aoss-qmp reg: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml index f5ecf4a..4a50f1d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -65,33 +65,22 @@ properties: qcom,tcs-config: $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 4 + maxItems: 4 items: - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3] - - description: Numbe r of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS + items: + - description: | + TCS type:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS description: | The tuple defining the configuration of TCS. Must have two cells which describe each TCS type. The order of the TCS must match the hardware configuration. - Cell 1 (TCS Type):: TCS types to be specified:: - - ACTIVE_TCS - - SLEEP_TCS - - WAKE_TCS - - CONTROL_TCS - Cell 2 (Number of TCS):: qcom,tcs-offset: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index f0f1bf0..50f8345 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -34,6 +34,7 @@ properties: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 - qcom,rpm-msm8226 + - qcom,rpm-msm8909 - qcom,rpm-msm8916 - qcom,rpm-msm8936 - qcom,rpm-msm8953 @@ -51,6 +52,9 @@ properties: $ref: /schemas/clock/qcom,rpmcc.yaml# unevaluatedProperties: false + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + qcom,smd-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the RPM communication diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml index 07d2d53..f433e6e 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml @@ -22,6 +22,7 @@ properties: - qcom,sdm660-silver-saw2-v4.1-l2 - qcom,msm8998-gold-saw2-v4.1-l2 - qcom,msm8998-silver-saw2-v4.1-l2 + - qcom,msm8909-saw2-v3.0-cpu - qcom,msm8916-saw2-v3.0-cpu - qcom,msm8226-saw2-v2.1-cpu - qcom,msm8974-saw2-v2.1-cpu diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml index d891ecf..5320504 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -77,7 +77,6 @@ properties: Should reference the tx-enable and tx-rings-empty SMEM states. qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array items: - const: tx-enable - const: tx-rings-empty diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index c30a643..13bb8df 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -49,9 +49,6 @@ properties: reg: maxItems: 1 - assigned-clock-parents: true - assigned-clocks: true - '#clock-cells': const: 1 @@ -77,14 +74,20 @@ properties: Must be identical to the that of the parent interrupt controller. const: 3 + reboot-mode: + $ref: /schemas/power/reset/syscon-reboot-mode.yaml + type: object + description: + Reboot mode to alter bootloader behavior for the next boot + syscon-poweroff: - $ref: "../../power/reset/syscon-poweroff.yaml#" + $ref: /schemas/power/reset/syscon-poweroff.yaml# type: object description: Node for power off method syscon-reboot: - $ref: "../../power/reset/syscon-reboot.yaml#" + $ref: /schemas/power/reset/syscon-reboot.yaml# type: object description: Node for reboot method diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index fde886a..60b4956 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -22,8 +22,12 @@ properties: pattern: "^usi@[0-9a-f]+$" compatible: - enum: - - samsung,exynos850-usi # for USIv2 (Exynos850, ExynosAutoV9) + oneOf: + - items: + - const: samsung,exynosautov9-usi + - const: samsung,exynos850-usi + - enum: + - samsung,exynos850-usi reg: true diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index 64461d4..8478732 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -65,10 +65,11 @@ properties: - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0 - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1 - ti,am5728-pruss # for AM57xx SoC family - - ti,k2g-pruss # for 66AK2G SoC family + - ti,am625-pruss # for K3 AM62x SoC family + - ti,am642-icssg # for K3 AM64x SoC family - ti,am654-icssg # for K3 AM65x SoC family - ti,j721e-icssg # for K3 J721E SoC family - - ti,am642-icssg # for K3 AM64x SoC family + - ti,k2g-pruss # for 66AK2G SoC family reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index e9a5330..ef18a57 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -25,12 +25,12 @@ properties: - qcom,sc7280-lpass-cpu reg: - minItems: 2 + minItems: 1 maxItems: 6 description: LPAIF core registers reg-names: - minItems: 2 + minItems: 1 maxItems: 6 clocks: @@ -42,12 +42,12 @@ properties: maxItems: 10 interrupts: - minItems: 2 + minItems: 1 maxItems: 4 description: LPAIF DMA buffer interrupt interrupt-names: - minItems: 2 + minItems: 1 maxItems: 4 qcom,adsp: diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml index 7e8d252..0d98403 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - renesas,r9a07g043-ssi # RZ/G2UL - renesas,r9a07g044-ssi # RZ/G2{L,LC} - renesas,r9a07g054-ssi # RZ/V2L - const: renesas,rz-ssi @@ -50,7 +51,7 @@ properties: minItems: 1 maxItems: 2 description: - The first cell represents a phandle to dmac + The first cell represents a phandle to dmac. The second cell specifies the encoded MID/RID values of the SSI port connected to the DMA client and the slave channel configuration parameters. diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml new file mode 100644 index 0000000..d85d540 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/atmel,at91rm9200-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel SPI device + +maintainers: + - Tudor Ambarus + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - const: atmel,at91rm9200-spi + - items: + - const: microchip,sam9x60-spi + - const: atmel,at91rm9200-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + contains: + const: spi_clk + + clocks: + maxItems: 1 + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum number of data the RX and TX FIFOs can store for FIFO + capable SPI controllers. + enum: [ 16, 32 ] + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi1: spi@fffcc000 { + compatible = "atmel,at91rm9200-spi"; + reg = <0xfffcc000 0x4000>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; + atmel,fifo-size = <32>; + + mmc@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + gpios = <&pioC 4 GPIO_ACTIVE_HIGH>; /* CD */ + spi-max-frequency = <25000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml new file mode 100644 index 0000000..7797c31 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HPE GXP spi controller flash interface + +maintainers: + - Nick Hawkins + - Jean-Marie Verdun + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: hpe,gxp-spifi + + reg: + items: + - description: cfg registers + - description: data registers + - description: mapped memory + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + + spi@200 { + compatible = "hpe,gxp-spifi"; + reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>; + interrupts = <20>; + interrupt-parent = <&vic0>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + }; + + flash@1 { + reg = <1>; + compatible = "jedec,spi-nor"; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml index 94ef055..8d2a6c0 100644 --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml @@ -18,6 +18,7 @@ properties: - items: - enum: - mediatek,mt7629-spi + - mediatek,mt8365-spi - const: mediatek,mt7622-spi - items: - enum: @@ -33,6 +34,7 @@ properties: - items: - enum: - mediatek,mt7986-spi-ipm + - mediatek,mt8188-spi-ipm - const: mediatek,spi-ipm - items: - enum: diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml index 41e60fe..970b111 100644 --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml @@ -23,6 +23,10 @@ allOf: properties: compatible: oneOf: + - enum: + - mediatek,mt8173-nor + - mediatek,mt8186-nor + - mediatek,mt8192-nor - items: - enum: - mediatek,mt2701-nor @@ -30,13 +34,13 @@ properties: - mediatek,mt7622-nor - mediatek,mt7623-nor - mediatek,mt7629-nor - - mediatek,mt8186-nor - - mediatek,mt8192-nor - mediatek,mt8195-nor - - enum: - - mediatek,mt8173-nor - - items: - const: mediatek,mt8173-nor + - items: + - enum: + - mediatek,mt8188-nor + - const: mediatek,mt8186-nor + reg: maxItems: 1 @@ -64,7 +68,6 @@ properties: required: - compatible - reg - - interrupts - clocks - clock-names diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml index ece261b..7326c0a 100644 --- a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml +++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml @@ -47,6 +47,5 @@ examples: clocks = <&clkcfg CLK_SPI0>; interrupt-parent = <&plic>; interrupts = <54>; - spi-max-frequency = <25000000>; }; ... diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt index a388005..c63ce4c 100644 --- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -6,8 +6,13 @@ The NPCM7XX supports three FIU modules, FIU0 and FIUx supports two chip selects, FIU3 support four chip select. +The NPCM8XX supports four FIU modules, +FIU0 and FIUx supports two chip selects, +FIU1 and FIU3 supports four chip selects. + Required properties: - - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC + - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC + "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC - #address-cells : should be 1. - #size-cells : should be 0. - reg : the first contains the register location and length, @@ -30,6 +35,12 @@ Aliases: fiu1 represent fiu 3 controller fiu2 represent fiu x controller + In the NPCM8XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 1 controller + fiu2 represent fiu 3 controller + fiu3 represent fiu x controller + Example: fiu3: spi@c00000000 { compatible = "nuvoton,npcm750-fiu"; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml new file mode 100644 index 0000000..24e0c21 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral properties for Tegra Quad SPI Controller + +maintainers: + - Thierry Reding + - Jonathan Hunter + +properties: + nvidia,tx-clk-tap-delay: + description: + Delays the clock going out to device with this tap value. + Tap value varies based on platform design trace lengths from Tegra + QSPI to corresponding slave device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + + nvidia,rx-clk-tap-delay: + description: + Delays the clock coming in from the device with this tap value. + Tap value varies based on platform design trace lengths from Tegra + QSPI to corresponding slave device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + +unevaluatedProperties: true + diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml index 0296edd..6b733e5 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml @@ -20,6 +20,7 @@ properties: - nvidia,tegra186-qspi - nvidia,tegra194-qspi - nvidia,tegra234-qspi + - nvidia,tegra241-qspi reg: maxItems: 1 @@ -57,27 +58,6 @@ patternProperties: spi-tx-bus-width: enum: [1, 2, 4] - nvidia,tx-clk-tap-delay: - description: - Delays the clock going out to device with this tap value. - Tap value varies based on platform design trace lengths from Tegra - QSPI to corresponding slave device. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 31 - - nvidia,rx-clk-tap-delay: - description: - Delays the clock coming in from the device with this tap value. - Tap value varies based on platform design trace lengths from Tegra - QSPI to corresponding slave device. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 255 - - required: - - reg - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml index e2c7b93..2e20ca3 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -45,12 +45,15 @@ properties: - const: rx interconnects: - maxItems: 2 + minItems: 2 + maxItems: 3 interconnect-names: + minItems: 2 items: - const: qup-core - const: qup-config + - const: qup-memory interrupts: maxItems: 1 @@ -110,7 +113,6 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&qup_spi1_default>; interrupts = ; - spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml index a50f24f..e0a465d7 100644 --- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -20,7 +20,9 @@ properties: - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450 - samsung,s3c6410-spi - samsung,s5pv210-spi # for S5PV210 and S5PC110 + - samsung,exynos4210-spi - samsung,exynos5433-spi + - samsung,exynosautov9-spi - tesla,fsd-spi - const: samsung,exynos7-spi deprecated: true @@ -85,7 +87,9 @@ allOf: properties: compatible: contains: - const: samsung,exynos5433-spi + enum: + - samsung,exynos5433-spi + - samsung,exynosautov9-spi then: properties: clocks: diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index d7e08b0..37c3c27 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -61,6 +61,8 @@ properties: - const: snps,dw-apb-ssi - description: Intel Keem Bay SPI Controller const: intel,keembay-ssi + - description: Intel Thunder Bay SPI Controller + const: intel,thunderbay-ssi - description: Baikal-T1 SPI Controller const: baikal,bt1-ssi - description: Baikal-T1 System Boot SPI Controller @@ -124,9 +126,16 @@ properties: rx-sample-delay-ns: default: 0 - description: Default value of the rx-sample-delay-ns property. + description: | + Default value of the rx-sample-delay-ns property. This value will be used if the property is not explicitly defined - for a SPI slave device. See below. + for a SPI slave device. + + SPI Rx sample delay offset, unit is nanoseconds. + The delay from the default sample time before the actual sample of the + rxd input signal occurs. The "rx_sample_delay" is an optional feature + of the designware controller, and the upper limit is also subject to + controller configuration. patternProperties: "^.*@[0-9a-f]+$": @@ -136,19 +145,6 @@ patternProperties: minimum: 0 maximum: 3 - spi-rx-bus-width: - const: 1 - - spi-tx-bus-width: - const: 1 - - rx-sample-delay-ns: - description: SPI Rx sample delay offset, unit is nanoseconds. - The delay from the default sample time before the actual - sample of the rxd input signal occurs. The "rx_sample_delay" - is an optional feature of the designware controller, and the - upper limit is also subject to controller configuration. - unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index 9787be2..82d0ca5 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -49,6 +49,13 @@ properties: enum: [ 0, 1 ] default: 0 +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index ebb4d5f..655713f 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -95,6 +95,17 @@ patternProperties: type: object $ref: spi-peripheral-props.yaml + properties: + spi-cpha: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires shifted clock phase (CPHA) mode. + + spi-cpol: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device requires inverse clock polarity (CPOL) mode. + required: - compatible - reg @@ -139,9 +150,9 @@ examples: }; flash@2 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <2>, <3>; - stacked-memories = /bits/ 64 <0x10000000 0x10000000>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <2>, <3>; + stacked-memories = /bits/ 64 <0x10000000 0x10000000>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5e32928..ce048e7 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -34,16 +34,6 @@ properties: description: The device requires 3-wire mode. - spi-cpha: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires shifted clock phase (CPHA) mode. - - spi-cpol: - $ref: /schemas/types.yaml#/definitions/flag - description: - The device requires inverse clock polarity (CPOL) mode. - spi-cs-high: $ref: /schemas/types.yaml#/definitions/flag description: @@ -71,6 +61,11 @@ properties: description: Delay, in microseconds, after a read transfer. + rx-sample-delay-ns: + description: SPI Rx sample delay offset, unit is nanoseconds. + The delay from the default sample time before the actual + sample of the rxd input signal occurs. + spi-tx-bus-width: description: Bus width to the SPI bus used for write transfers. @@ -112,5 +107,6 @@ properties: allOf: - $ref: cdns,qspi-nor-peripheral-props.yaml# - $ref: samsung,spi-peripheral-props.yaml# + - $ref: nvidia,tegra210-quad-peripheral-props.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml index ea72c80..fafde1c 100644 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -30,6 +30,13 @@ properties: clocks: maxItems: 2 +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt deleted file mode 100644 index 5bb4a8f..0000000 --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ /dev/null @@ -1,36 +0,0 @@ -Atmel SPI device - -Required properties: -- compatible : should be "atmel,at91rm9200-spi" or "microchip,sam9x60-spi". -- reg: Address and length of the register set for the device -- interrupts: Should contain spi interrupt -- cs-gpios: chipselects (optional for SPI controller version >= 2 with the - Chip Select Active After Transfer feature). -- clock-names: tuple listing input clock names. - Required elements: "spi_clk" -- clocks: phandles to input clocks. - -Optional properties: -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable SPI controllers. - -Example: - -spi1: spi@fffcc000 { - compatible = "atmel,at91rm9200-spi"; - reg = <0xfffcc000 0x4000>; - interrupts = <13 4 5>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&spi1_clk>; - clock-names = "spi_clk"; - cs-gpios = <&pioB 3 0>; - atmel,fifo-size = <32>; - - mmc-slot@0 { - compatible = "mmc-spi-slot"; - reg = <0>; - gpios = <&pioC 4 0>; /* CD */ - spi-max-frequency = <25000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml new file mode 100644 index 0000000..f9e4b3c --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Thermal bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + items: + - const: fsl,imx8qxp-sc-thermal + - const: fsl,imx-sc-thermal + + '#thermal-sensor-cells': + const: 1 + +required: + - compatible + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + thermal-sensor { + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml new file mode 100644 index 0000000..5f08b6e --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QPNP PMIC Temperature Alarm + +maintainers: + - Bjorn Andersson + +description: + QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips + that utilize the Qualcomm SPMI implementation. These peripherals provide an + interrupt signal and status register to identify high PMIC die temperature. + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + const: qcom,spmi-temp-alarm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + io-channels: + items: + - description: ADC channel, which reports chip die temperature + + io-channel-names: + items: + - const: thermal + + '#thermal-sensor-cells': + const: 0 + +required: + - compatible + - reg + - interrupts + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + #include + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + pm8350_temp_alarm: temperature-sensor@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + pm8350_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350_temp_alarm>; + + trips { + pm8350_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt deleted file mode 100644 index 2d5b2ad..0000000 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt +++ /dev/null @@ -1,51 +0,0 @@ -Qualcomm QPNP PMIC Temperature Alarm - -QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips -that utilize the Qualcomm SPMI implementation. These peripherals provide an -interrupt signal and status register to identify high PMIC die temperature. - -Required properties: -- compatible: Should contain "qcom,spmi-temp-alarm". -- reg: Specifies the SPMI address. -- interrupts: PMIC temperature alarm interrupt. -- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Optional properties: -- io-channels: Should contain IIO channel specifier for the ADC channel, - which report chip die temperature. -- io-channel-names: Should contain "thermal". - -Example: - - pm8941_temp: thermal-alarm@2400 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400>; - interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; - #thermal-sensor-cells = <0>; - - io-channels = <&pm8941_vadc VADC_DIE_TEMP>; - io-channel-names = "thermal"; - }; - - thermal-zones { - pm8941 { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&pm8941_temp>; - - trips { - stage1 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - stage2 { - temperature = <125000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index 1368d90..0f05f5c 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -8,9 +8,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas R-Car Gen3 Thermal Sensor description: - On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal - sensors (THS) which are the analog circuits for measuring temperature (Tj) - inside the LSI. + On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC) + control the thermal sensors (THS) which are the analog circuits for + measuring temperature (Tj) inside the LSI. maintainers: - Niklas Söderlund @@ -27,6 +27,7 @@ properties: - renesas,r8a77965-thermal # R-Car M3-N - renesas,r8a77980-thermal # R-Car V3H - renesas,r8a779a0-thermal # R-Car V3U + - renesas,r8a779f0-thermal # R-Car S4-8 reg: true @@ -57,31 +58,38 @@ required: - "#thermal-sensor-cells" if: - not: - properties: - compatible: - contains: - enum: - - renesas,r8a779a0-thermal + properties: + compatible: + contains: + enum: + - renesas,r8a779a0-thermal then: properties: reg: - minItems: 2 items: + - description: TSC0 registers - description: TSC1 registers - description: TSC2 registers - description: TSC3 registers - required: - - interrupts + - description: TSC4 registers else: properties: reg: + minItems: 2 items: - - description: TSC0 registers - description: TSC1 registers - description: TSC2 registers - description: TSC3 registers - - description: TSC4 registers + if: + not: + properties: + compatible: + contains: + enum: + - renesas,r8a779f0-thermal + then: + required: + - interrupts additionalProperties: false diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index 53fd24b..3711872 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -20,6 +20,7 @@ properties: - allwinner,suniv-f1c100s-timer - items: - enum: + - allwinner,sun20i-d1-timer - allwinner,sun50i-a64-timer - allwinner,sun50i-h6-timer - allwinner,sun50i-h616-timer diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml index d541cf2..0a01e4f 100644 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml @@ -113,7 +113,7 @@ properties: patternProperties: "^watchdog@[a-f0-9]+$": type: object - $ref: ../watchdog/watchdog.yaml# + $ref: /schemas/watchdog/watchdog.yaml# properties: compatible: oneOf: @@ -145,7 +145,7 @@ patternProperties: "^pwm@[a-f0-9]+$": type: object - $ref: ../pwm/pwm.yaml# + $ref: /schemas/pwm/pwm.yaml# properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 6f1f9db..f1c848af 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -1,7 +1,8 @@ MediaTek Timers --------------- -MediaTek SoCs have two different timers on different platforms, +MediaTek SoCs have different timers on different platforms, +- CPUX (ARM/ARM64 System Timer) - GPT (General Purpose Timer) - SYST (System Timer) @@ -29,6 +30,9 @@ Required properties: * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) + For those SoCs that use CPUX + * "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX) + - reg: Should contain location and length for timer register. - clocks: Should contain system clock. diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml index 0cbc26a..737af78 100644 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml @@ -8,12 +8,14 @@ title: Nuvoton NPCM7xx timer maintainers: - Jonathan Neuschäfer + - Tomer Maimon properties: compatible: enum: - nuvoton,wpcm450-timer # for Hermon WPCM450 - nuvoton,npcm750-timer # for Poleg NPCM750 + - nuvoton,npcm845-timer # for Arbel NPCM845 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml new file mode 100644 index 0000000..db8b559 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra186 timer + +maintainers: + - Thierry Reding + +description: > + The Tegra timer provides 29-bit timer counters and a 32-bit timestamp + counter. Each NV timer selects its timing reference signal from the 1 MHz + reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be + programmed to generate one-shot, periodic, or watchdog interrupts. + + +properties: + compatible: + oneOf: + - const: nvidia,tegra186-timer + description: > + The Tegra186 timer provides ten 29-bit timer counters. + - const: nvidia,tegra234-timer + description: > + The Tegra234 timer provides sixteen 29-bit timer counters. + + reg: + maxItems: 1 + + interrupts: true + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-timer + then: + properties: + interrupts: + maxItems: 10 + description: > + One per each timer channels 0 through 9. + + - if: + properties: + compatible: + contains: + const: nvidia,tegra234-timer + then: + properties: + interrupts: + maxItems: 16 + description: > + One per each timer channels 0 through 15. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + #include + + timer@3010000 { + compatible = "nvidia,tegra186-timer"; + reg = <0x03010000 0x000e0000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + }; + + - | + #include + #include + + timer@2080000 { + compatible = "nvidia,tegra234-timer"; + reg = <0x02080000 0x00121000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml index 53dd6d9..bde6c9b 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml @@ -80,7 +80,6 @@ properties: - renesas,r8a77980-cmt0 # 32-bit CMT0 on R-Car V3H - renesas,r8a77990-cmt0 # 32-bit CMT0 on R-Car E3 - renesas,r8a77995-cmt0 # 32-bit CMT0 on R-Car D3 - - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2 - items: @@ -97,9 +96,20 @@ properties: - renesas,r8a77980-cmt1 # 48-bit CMT on R-Car V3H - renesas,r8a77990-cmt1 # 48-bit CMT on R-Car E3 - renesas,r8a77995-cmt1 # 48-bit CMT on R-Car D3 - - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2 + - items: + - enum: + - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U + - renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8 + - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4 + + - items: + - enum: + - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U + - renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8 + - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4 + reg: maxItems: 1 @@ -135,6 +145,7 @@ allOf: enum: - renesas,rcar-gen2-cmt0 - renesas,rcar-gen3-cmt0 + - renesas,rcar-gen4-cmt0 then: properties: interrupts: @@ -148,6 +159,7 @@ allOf: enum: - renesas,rcar-gen2-cmt1 - renesas,rcar-gen3-cmt1 + - renesas,rcar-gen4-cmt1 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml new file mode 100644 index 0000000..901848d --- /dev/null +++ b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/timer/st,nomadik-mtu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ST Microelectronics Nomadik Multi-Timer Unit MTU Timer + +maintainers: + - Linus Walleij + +description: This timer is found in the ST Microelectronics Nomadik + SoCs STn8800, STn8810 and STn8815 as well as in ST-Ericsson DB8500. + +properties: + compatible: + items: + - const: st,nomadik-mtu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: The first clock named TIMCLK clocks the actual timers and + the second clock clocks the digital interface to the interconnect. + maxItems: 2 + + clock-names: + items: + - const: timclk + - const: apb_pclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + timer@a03c6000 { + compatible = "st,nomadik-mtu"; + reg = <0xa03c6000 0x1000>; + interrupts = ; + + clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>; + clock-names = "timclk", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 6aafa71..5d87b84 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -41,6 +41,8 @@ properties: - adi,adp5585-02 # Analog Devices ADP5589 Keypad Decoder and I/O Expansion - adi,adp5589 + # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher + - adi,lt7182s # AMS iAQ-Core VOC Sensor - ams,iaq-core # i2c serial eeprom (24cxx) diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index 933fa35..e5dbf41 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -20,6 +20,7 @@ properties: - items: - enum: - allwinner,sun8i-a83t-musb + - allwinner,sun20i-d1-musb - allwinner,sun50i-h6-musb - const: allwinner,sun8i-a33-musb - items: diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index f512f02..12183ef 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -87,6 +87,9 @@ Required properties: "atmel,at91sam9g45-udc" "atmel,sama5d3-udc" "microchip,sam9x60-udc" + "microchip,lan9662-udc" + For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc" + is required. - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index bf73de0..4aa3684 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -13,7 +13,7 @@ Required properties: - resets : list of phandle and reset specifier pairs. There should be two entries, one for the powerdown and softreset lines of the usb3 IP - reset-names : list of reset signal names. Names should be "powerdown" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt - #address-cells, #size-cells : should be '1' if the device has sub-nodes diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 065c91d..d6f2bde 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle + reset specifier pairs to the powerdown and softreset lines of the USB IP - reset-names : should be "power" and "softreset" -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 0b4524b..25a6c14 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -38,6 +38,7 @@ properties: - allwinner,sun8i-h3-ehci - allwinner,sun8i-r40-ehci - allwinner,sun9i-a80-ehci + - allwinner,sun20i-d1-ehci - aspeed,ast2400-ehci - aspeed,ast2500-ehci - aspeed,ast2600-ehci @@ -136,7 +137,8 @@ properties: Phandle of a companion. phys: - maxItems: 1 + minItems: 1 + maxItems: 3 phy-names: const: usb diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index e2ac846..180361b 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -28,6 +28,7 @@ properties: - allwinner,sun8i-h3-ohci - allwinner,sun8i-r40-ohci - allwinner,sun9i-a80-ohci + - allwinner,sun20i-d1-ohci - brcm,bcm3384-ohci - brcm,bcm63268-ohci - brcm,bcm6328-ohci @@ -103,7 +104,8 @@ properties: Overrides the detected port count phys: - maxItems: 1 + minItems: 1 + maxItems: 3 phy-names: const: usb diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index 44c998c..1c73557 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - resets : phandle to the powerdown and reset controller for the USB IP - reset-names : should be "power" and "softreset". -See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml See: Documentation/devicetree/bindings/reset/reset.txt Example: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index e336fe2..749e196 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SuperSpeed DWC3 USB SoC controller maintainers: - - Manu Gautam + - Wesley Cheng properties: compatible: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 6bb20b4..ff0ac85 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -143,6 +143,9 @@ patternProperties: description: ASPEED Technology Inc. "^asus,.*": description: AsusTek Computer Inc. + "^atheros,.*": + description: Qualcomm Atheros, Inc. (deprecated, use qca) + deprecated: true "^atlas,.*": description: Atlas Scientific LLC "^atmel,.*": @@ -507,6 +510,8 @@ patternProperties: description: Haoyu Microelectronic Co. Ltd. "^hardkernel,.*": description: Hardkernel Co., Ltd + "^hechuang,.*": + description: Shenzhen Hechuang Intelligent Co. "^hideep,.*": description: HiDeep Inc. "^himax,.*": @@ -1098,6 +1103,8 @@ patternProperties: description: SGX Sensortech "^sharp,.*": description: Sharp Corporation + "^shift,.*": + description: SHIFT GmbH "^shimafuji,.*": description: Shimafuji Electric, Inc. "^shiratech,.*": diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index cbcf19f..ed6c1ca 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -64,7 +64,6 @@ if: then: properties: clocks: - minItems: 2 items: - description: High-frequency oscillator input, divided internally - description: Low-frequency oscillator input diff --git a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml new file mode 100644 index 0000000..f84c45d --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Watchdog bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + items: + - const: fsl,imx8qxp-sc-wdt + - const: fsl,imx-sc-wdt + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt index 9059f54..866a958 100644 --- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt @@ -6,7 +6,8 @@ expiry. Required properties: - compatible : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or - "nuvoton,wpcm450-wdt" for WPCM450 (Hermon). + "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or + "nuvoton,npcm845-wdt" for NPCM845 (Arbel). - reg : Offset and length of the register set for the device. - interrupts : Contain the timer interrupt with flags for falling edge. diff --git a/Documentation/driver-api/firmware/other_interfaces.rst b/Documentation/driver-api/firmware/other_interfaces.rst index b81794e..06ac89a 100644 --- a/Documentation/driver-api/firmware/other_interfaces.rst +++ b/Documentation/driver-api/firmware/other_interfaces.rst @@ -13,6 +13,12 @@ EDD Interfaces .. kernel-doc:: drivers/firmware/edd.c :internal: +Generic System Framebuffers Interface +------------------------------------- + +.. kernel-doc:: drivers/firmware/sysfb.c + :export: + Intel Stratix10 SoC Service Layer --------------------------------- Some features of the Intel Stratix10 SoC require a level of privilege diff --git a/Documentation/driver-api/gpio/board.rst b/Documentation/driver-api/gpio/board.rst index 4e3adf3..b33aa04 100644 --- a/Documentation/driver-api/gpio/board.rst +++ b/Documentation/driver-api/gpio/board.rst @@ -6,7 +6,7 @@ This document explains how GPIOs can be assigned to given devices and functions. Note that it only applies to the new descriptor-based interface. For a description of the deprecated integer-based GPIO interface please refer to -gpio-legacy.txt (actually, there is no real mapping possible with the old +legacy.rst (actually, there is no real mapping possible with the old interface; you just fetch an integer from somewhere and request the corresponding GPIO). diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst index 47869ca..72bcf5f 100644 --- a/Documentation/driver-api/gpio/consumer.rst +++ b/Documentation/driver-api/gpio/consumer.rst @@ -4,7 +4,7 @@ GPIO Descriptor Consumer Interface This document describes the consumer interface of the GPIO framework. Note that it describes the new descriptor-based interface. For a description of the -deprecated integer-based GPIO interface please refer to gpio-legacy.txt. +deprecated integer-based GPIO interface please refer to legacy.rst. Guidelines for GPIOs consumers @@ -78,7 +78,7 @@ whether the line is configured active high or active low (see The two last flags are used for use cases where open drain is mandatory, such as I2C: if the line is not already configured as open drain in the mappings -(see board.txt), then open drain will be enforced anyway and a warning will be +(see board.rst), then open drain will be enforced anyway and a warning will be printed that the board configuration needs to be updated to match the use case. Both functions return either a valid GPIO descriptor, or an error code checkable @@ -270,7 +270,7 @@ driven. The same is applicable for open drain or open source output lines: those do not actively drive their output high (open drain) or low (open source), they just switch their output to a high impedance value. The consumer should not need to -care. (For details read about open drain in driver.txt.) +care. (For details read about open drain in driver.rst.) With this, all the gpiod_set_(array)_value_xxx() functions interpret the parameter "value" as "asserted" ("1") or "de-asserted" ("0"). The physical line diff --git a/Documentation/driver-api/gpio/intro.rst b/Documentation/driver-api/gpio/intro.rst index 2e924fb..c9c1924 100644 --- a/Documentation/driver-api/gpio/intro.rst +++ b/Documentation/driver-api/gpio/intro.rst @@ -14,12 +14,12 @@ Due to the history of GPIO interfaces in the kernel, there are two different ways to obtain and use GPIOs: - The descriptor-based interface is the preferred way to manipulate GPIOs, - and is described by all the files in this directory excepted gpio-legacy.txt. + and is described by all the files in this directory excepted legacy.rst. - The legacy integer-based interface which is considered deprecated (but still - usable for compatibility reasons) is documented in gpio-legacy.txt. + usable for compatibility reasons) is documented in legacy.rst. The remainder of this document applies to the new descriptor-based interface. -gpio-legacy.txt contains the same information applied to the legacy +legacy.rst contains the same information applied to the legacy integer-based interface. diff --git a/Documentation/hte/hte.rst b/Documentation/driver-api/hte/hte.rst similarity index 100% rename from Documentation/hte/hte.rst rename to Documentation/driver-api/hte/hte.rst diff --git a/Documentation/hte/index.rst b/Documentation/driver-api/hte/index.rst similarity index 100% rename from Documentation/hte/index.rst rename to Documentation/driver-api/hte/index.rst diff --git a/Documentation/hte/tegra194-hte.rst b/Documentation/driver-api/hte/tegra194-hte.rst similarity index 100% rename from Documentation/hte/tegra194-hte.rst rename to Documentation/driver-api/hte/tegra194-hte.rst diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index d76a60d..a6d525c 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -108,6 +108,7 @@ available subsections can be seen below. xilinx/index xillybus zorro + hte/index .. only:: subproject and html diff --git a/Documentation/features/core/cBPF-JIT/arch-support.txt b/Documentation/features/core/cBPF-JIT/arch-support.txt index 10482de..a053667 100644 --- a/Documentation/features/core/cBPF-JIT/arch-support.txt +++ b/Documentation/features/core/cBPF-JIT/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/eBPF-JIT/arch-support.txt b/Documentation/features/core/eBPF-JIT/arch-support.txt index bcefb5a..c0bb9c9 100644 --- a/Documentation/features/core/eBPF-JIT/arch-support.txt +++ b/Documentation/features/core/eBPF-JIT/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index d80d994..c9bfff2 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | ok | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 53eab15..35e2a44 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/core/thread-info-in-task/arch-support.txt b/Documentation/features/core/thread-info-in-task/arch-support.txt index 9492645..9b3e2ce 100644 --- a/Documentation/features/core/thread-info-in-task/arch-support.txt +++ b/Documentation/features/core/thread-info-in-task/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index b4274b8..9c7ffec 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | ok | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index c15bb4b..2fd5fb6 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt index 4c31fc9..c45711e 100644 --- a/Documentation/features/debug/debug-vm-pgtable/arch-support.txt +++ b/Documentation/features/debug/debug-vm-pgtable/arch-support.txt @@ -13,12 +13,13 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | | nios2: | TODO | | openrisc: | TODO | - | parisc: | TODO | + | parisc: | ok | | powerpc: | ok | | riscv: | ok | | s390: | ok | diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index d7a5ac4..502c1d4 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | ok | | mips: | ok | @@ -24,7 +25,7 @@ | s390: | ok | | sh: | ok | | sparc: | TODO | - | um: | TODO | + | um: | ok | | x86: | ok | | xtensa: | TODO | ----------------------- diff --git a/Documentation/features/debug/kcov/arch-support.txt b/Documentation/features/debug/kcov/arch-support.txt index 136e14c..afb90be 100644 --- a/Documentation/features/debug/kcov/arch-support.txt +++ b/Documentation/features/debug/kcov/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index 5b3f3d8..04120d2 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | ok | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/debug/kmemleak/arch-support.txt b/Documentation/features/debug/kmemleak/arch-support.txt index 7a2eab4..e487c35 100644 --- a/Documentation/features/debug/kmemleak/arch-support.txt +++ b/Documentation/features/debug/kmemleak/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index db02ab1..b3697f4 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index ec186e7..452385a 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | ok | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index 4b7865e..daecf04 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | ok | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index 5d9befa..adb1bd0 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index d97fd38..ddcd716 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index d30e347..2512120 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index 9ae1fa2..f2fcff8 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 9e09988..95e485c 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index 5c4ec31..8b1a8d9 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index 65007c1..ab69e8f 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index 2005667..0bfb72a 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | @@ -20,7 +21,7 @@ | openrisc: | ok | | parisc: | TODO | | powerpc: | ok | - | riscv: | TODO | + | riscv: | ok | | s390: | TODO | | sh: | TODO | | sparc: | ok | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index 707514f..d2f2201 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 9f31ce9..0d0647b 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -7,12 +7,13 @@ | arch |status| ----------------------- | alpha: | TODO | - | arc: | TODO | + | arc: | ok | | arm: | ok | | arm64: | ok | | csky: | ok | | hexagon: | ok | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index f148c43..13c297b 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index 32c88b6..931687e 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index d82a1f0..336d728 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -36,6 +36,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index 2687564..76d0121 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -13,6 +13,7 @@ | csky: | .. | | hexagon: | .. | | ia64: | TODO | + | loong: | ok | | m68k: | .. | | microblaze: | .. | | mips: | TODO | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index 1b41091..a86b8b1 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index 2732725..364169f 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index b9a4bda..6ea2747 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | ok | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | ok | | mips: | ok | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index 4aa51c9..c9e0a16 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 0306ece..fd17d8d 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | .. | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index 5d64e40..1a859ac 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -13,6 +13,7 @@ | csky: | ok | | hexagon: | TODO | | ia64: | ok | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index 92c9db2..b122995 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index 7424fea..02f325f 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | ok | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index 6098506..9bfff97 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -13,6 +13,7 @@ | csky: | .. | | hexagon: | .. | | ia64: | TODO | + | loong: | ok | | m68k: | .. | | microblaze: | .. | | mips: | ok | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index f2dcbec..039e4e9 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | .. | | microblaze: | .. | | mips: | TODO | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index 680090d..13b4940 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -13,6 +13,7 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | TODO | | m68k: | TODO | | microblaze: | TODO | | mips: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 205a90e..6bd78eb 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -9,10 +9,11 @@ | alpha: | TODO | | arc: | ok | | arm: | TODO | - | arm64: | TODO | + | arm64: | ok | | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index 9f16d6e..fc3687b 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -13,12 +13,13 @@ | csky: | TODO | | hexagon: | TODO | | ia64: | TODO | + | loong: | ok | | m68k: | TODO | | microblaze: | TODO | | mips: | ok | | nios2: | TODO | | openrisc: | TODO | - | parisc: | TODO | + | parisc: | ok | | powerpc: | ok | | riscv: | ok | | s390: | ok | diff --git a/Documentation/filesystems/btrfs.rst b/Documentation/filesystems/btrfs.rst index d0904f6..992eddb 100644 --- a/Documentation/filesystems/btrfs.rst +++ b/Documentation/filesystems/btrfs.rst @@ -19,13 +19,23 @@ The main Btrfs features include: * Subvolumes (separate internal filesystem roots) * Object level mirroring and striping * Checksums on data and metadata (multiple algorithms available) - * Compression + * Compression (multiple algorithms available) + * Reflink, deduplication + * Scrub (on-line checksum verification) + * Hierarchical quota groups (subvolume and snapshot support) * Integrated multiple device support, with several raid algorithms * Offline filesystem check - * Efficient incremental backup and FS mirroring + * Efficient incremental backup and FS mirroring (send/receive) + * Trim/discard * Online filesystem defragmentation + * Swapfile support + * Zoned mode + * Read/write metadata verification + * Online resize (shrink, grow) -For more information please refer to the wiki +For more information please refer to the documentation site or wiki + + https://btrfs.readthedocs.io https://btrfs.wiki.kernel.org diff --git a/Documentation/filesystems/ext4/attributes.rst b/Documentation/filesystems/ext4/attributes.rst index 871d2da..8781469 100644 --- a/Documentation/filesystems/ext4/attributes.rst +++ b/Documentation/filesystems/ext4/attributes.rst @@ -13,8 +13,8 @@ disappeared as of Linux 3.0. There are two places where extended attributes can be found. The first place is between the end of each inode entry and the beginning of the -next inode entry. For example, if inode.i\_extra\_isize = 28 and -sb.inode\_size = 256, then there are 256 - (128 + 28) = 100 bytes +next inode entry. For example, if inode.i_extra_isize = 28 and +sb.inode_size = 256, then there are 256 - (128 + 28) = 100 bytes available for in-inode extended attribute storage. The second place where extended attributes can be found is in the block pointed to by ``inode.i_file_acl``. As of Linux 3.11, it is not possible for this @@ -38,8 +38,8 @@ Extended attributes, when stored after the inode, have a header - Name - Description * - 0x0 - - \_\_le32 - - h\_magic + - __le32 + - h_magic - Magic number for identification, 0xEA020000. This value is set by the Linux driver, though e2fsprogs doesn't seem to check it(?) @@ -55,28 +55,28 @@ The beginning of an extended attribute block is in - Name - Description * - 0x0 - - \_\_le32 - - h\_magic + - __le32 + - h_magic - Magic number for identification, 0xEA020000. * - 0x4 - - \_\_le32 - - h\_refcount + - __le32 + - h_refcount - Reference count. * - 0x8 - - \_\_le32 - - h\_blocks + - __le32 + - h_blocks - Number of disk blocks used. * - 0xC - - \_\_le32 - - h\_hash + - __le32 + - h_hash - Hash value of all attributes. * - 0x10 - - \_\_le32 - - h\_checksum + - __le32 + - h_checksum - Checksum of the extended attribute block. * - 0x14 - - \_\_u32 - - h\_reserved[3] + - __u32 + - h_reserved[3] - Zero. The checksum is calculated against the FS UUID, the 64-bit block number @@ -100,46 +100,46 @@ Attributes stored inside an inode do not need be stored in sorted order. - Name - Description * - 0x0 - - \_\_u8 - - e\_name\_len + - __u8 + - e_name_len - Length of name. * - 0x1 - - \_\_u8 - - e\_name\_index + - __u8 + - e_name_index - Attribute name index. There is a discussion of this below. * - 0x2 - - \_\_le16 - - e\_value\_offs + - __le16 + - e_value_offs - Location of this attribute's value on the disk block where it is stored. Multiple attributes can share the same value. For an inode attribute this value is relative to the start of the first entry; for a block this value is relative to the start of the block (i.e. the header). * - 0x4 - - \_\_le32 - - e\_value\_inum + - __le32 + - e_value_inum - The inode where the value is stored. Zero indicates the value is in the same block as this entry. This field is only used if the - INCOMPAT\_EA\_INODE feature is enabled. + INCOMPAT_EA_INODE feature is enabled. * - 0x8 - - \_\_le32 - - e\_value\_size + - __le32 + - e_value_size - Length of attribute value. * - 0xC - - \_\_le32 - - e\_hash + - __le32 + - e_hash - Hash value of attribute name and attribute value. The kernel doesn't update the hash for in-inode attributes, so for that case this value must be zero, because e2fsck validates any non-zero hash regardless of where the xattr lives. * - 0x10 - char - - e\_name[e\_name\_len] + - e_name[e_name_len] - Attribute name. Does not include trailing NULL. Attribute values can follow the end of the entry table. There appears to be a requirement that they be aligned to 4-byte boundaries. The values are stored starting at the end of the block and grow towards the -xattr\_header/xattr\_entry table. When the two collide, the overflow is +xattr_header/xattr_entry table. When the two collide, the overflow is put into a separate disk block. If the disk block fills up, the filesystem returns -ENOSPC. @@ -167,15 +167,15 @@ the key name. Here is a map of name index values to key prefixes: * - 1 - “user.” * - 2 - - “system.posix\_acl\_access” + - “system.posix_acl_access” * - 3 - - “system.posix\_acl\_default” + - “system.posix_acl_default” * - 4 - “trusted.” * - 6 - “security.” * - 7 - - “system.” (inline\_data only?) + - “system.” (inline_data only?) * - 8 - “system.richacl” (SuSE kernels only?) diff --git a/Documentation/filesystems/ext4/bigalloc.rst b/Documentation/filesystems/ext4/bigalloc.rst index 72075aa..976a180 100644 --- a/Documentation/filesystems/ext4/bigalloc.rst +++ b/Documentation/filesystems/ext4/bigalloc.rst @@ -23,7 +23,7 @@ means that a block group addresses 32 gigabytes instead of 128 megabytes, also shrinking the amount of file system overhead for metadata. The administrator can set a block cluster size at mkfs time (which is -stored in the s\_log\_cluster\_size field in the superblock); from then +stored in the s_log_cluster_size field in the superblock); from then on, the block bitmaps track clusters, not individual blocks. This means that block groups can be several gigabytes in size (instead of just 128MiB); however, the minimum allocation unit becomes a cluster, not a diff --git a/Documentation/filesystems/ext4/bitmaps.rst b/Documentation/filesystems/ext4/bitmaps.rst index c7546db..91c45d8 100644 --- a/Documentation/filesystems/ext4/bitmaps.rst +++ b/Documentation/filesystems/ext4/bitmaps.rst @@ -9,15 +9,15 @@ group. The inode bitmap records which entries in the inode table are in use. As with most bitmaps, one bit represents the usage status of one data -block or inode table entry. This implies a block group size of 8 \* -number\_of\_bytes\_in\_a\_logical\_block. +block or inode table entry. This implies a block group size of 8 * +number_of_bytes_in_a_logical_block. NOTE: If ``BLOCK_UNINIT`` is set for a given block group, various parts of the kernel and e2fsprogs code pretends that the block bitmap contains zeros (i.e. all blocks in the group are free). However, it is not necessarily the case that no blocks are in use -- if ``meta_bg`` is set, the bitmaps and group descriptor live inside the group. Unfortunately, -ext2fs\_test\_block\_bitmap2() will return '0' for those locations, +ext2fs_test_block_bitmap2() will return '0' for those locations, which produces confusing debugfs output. Inode Table diff --git a/Documentation/filesystems/ext4/blockgroup.rst b/Documentation/filesystems/ext4/blockgroup.rst index d5d652a..46d78f8 100644 --- a/Documentation/filesystems/ext4/blockgroup.rst +++ b/Documentation/filesystems/ext4/blockgroup.rst @@ -56,39 +56,39 @@ established that the super block and the group descriptor table, if present, will be at the beginning of the block group. The bitmaps and the inode table can be anywhere, and it is quite possible for the bitmaps to come after the inode table, or for both to be in different -groups (flex\_bg). Leftover space is used for file data blocks, indirect +groups (flex_bg). Leftover space is used for file data blocks, indirect block maps, extent tree blocks, and extended attributes. Flexible Block Groups --------------------- Starting in ext4, there is a new feature called flexible block groups -(flex\_bg). In a flex\_bg, several block groups are tied together as one +(flex_bg). In a flex_bg, several block groups are tied together as one logical block group; the bitmap spaces and the inode table space in the -first block group of the flex\_bg are expanded to include the bitmaps -and inode tables of all other block groups in the flex\_bg. For example, -if the flex\_bg size is 4, then group 0 will contain (in order) the +first block group of the flex_bg are expanded to include the bitmaps +and inode tables of all other block groups in the flex_bg. For example, +if the flex_bg size is 4, then group 0 will contain (in order) the superblock, group descriptors, data block bitmaps for groups 0-3, inode bitmaps for groups 0-3, inode tables for groups 0-3, and the remaining space in group 0 is for file data. The effect of this is to group the block group metadata close together for faster loading, and to enable large files to be continuous on disk. Backup copies of the superblock and group descriptors are always at the beginning of block groups, even -if flex\_bg is enabled. The number of block groups that make up a -flex\_bg is given by 2 ^ ``sb.s_log_groups_per_flex``. +if flex_bg is enabled. The number of block groups that make up a +flex_bg is given by 2 ^ ``sb.s_log_groups_per_flex``. Meta Block Groups ----------------- -Without the option META\_BG, for safety concerns, all block group +Without the option META_BG, for safety concerns, all block group descriptors copies are kept in the first block group. Given the default 128MiB(2^27 bytes) block group size and 64-byte group descriptors, ext4 can have at most 2^27/64 = 2^21 block groups. This limits the entire filesystem size to 2^21 * 2^27 = 2^48bytes or 256TiB. The solution to this problem is to use the metablock group feature -(META\_BG), which is already in ext3 for all 2.6 releases. With the -META\_BG feature, ext4 filesystems are partitioned into many metablock +(META_BG), which is already in ext3 for all 2.6 releases. With the +META_BG feature, ext4 filesystems are partitioned into many metablock groups. Each metablock group is a cluster of block groups whose group descriptor structures can be stored in a single disk block. For ext4 filesystems with 4 KB block size, a single metablock group partition @@ -110,7 +110,7 @@ bytes, a meta-block group contains 32 block groups for filesystems with a 1KB block size, and 128 block groups for filesystems with a 4KB blocksize. Filesystems can either be created using this new block group descriptor layout, or existing filesystems can be resized on-line, and -the field s\_first\_meta\_bg in the superblock will indicate the first +the field s_first_meta_bg in the superblock will indicate the first block group using this new layout. Please see an important note about ``BLOCK_UNINIT`` in the section about @@ -121,15 +121,15 @@ Lazy Block Group Initialization A new feature for ext4 are three block group descriptor flags that enable mkfs to skip initializing other parts of the block group -metadata. Specifically, the INODE\_UNINIT and BLOCK\_UNINIT flags mean +metadata. Specifically, the INODE_UNINIT and BLOCK_UNINIT flags mean that the inode and block bitmaps for that group can be calculated and therefore the on-disk bitmap blocks are not initialized. This is generally the case for an empty block group or a block group containing -only fixed-location block group metadata. The INODE\_ZEROED flag means +only fixed-location block group metadata. The INODE_ZEROED flag means that the inode table has been initialized; mkfs will unset this flag and rely on the kernel to initialize the inode tables in the background. By not writing zeroes to the bitmaps and inode table, mkfs time is -reduced considerably. Note the feature flag is RO\_COMPAT\_GDT\_CSUM, -but the dumpe2fs output prints this as “uninit\_bg”. They are the same +reduced considerably. Note the feature flag is RO_COMPAT_GDT_CSUM, +but the dumpe2fs output prints this as “uninit_bg”. They are the same thing. diff --git a/Documentation/filesystems/ext4/blockmap.rst b/Documentation/filesystems/ext4/blockmap.rst index 30e2575..2bd9904 100644 --- a/Documentation/filesystems/ext4/blockmap.rst +++ b/Documentation/filesystems/ext4/blockmap.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 +---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ -| i.i\_block Offset | Where It Points | +| i.i_block Offset | Where It Points | +=====================+==============================================================================================================================================================================================================================+ | 0 to 11 | Direct map to file blocks 0 to 11. | +---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ diff --git a/Documentation/filesystems/ext4/checksums.rst b/Documentation/filesystems/ext4/checksums.rst index 5519e25..e232749d 100644 --- a/Documentation/filesystems/ext4/checksums.rst +++ b/Documentation/filesystems/ext4/checksums.rst @@ -4,7 +4,7 @@ Checksums --------- Starting in early 2012, metadata checksums were added to all major ext4 -and jbd2 data structures. The associated feature flag is metadata\_csum. +and jbd2 data structures. The associated feature flag is metadata_csum. The desired checksum algorithm is indicated in the superblock, though as of October 2012 the only supported algorithm is crc32c. Some data structures did not have space to fit a full 32-bit checksum, so only the @@ -20,7 +20,7 @@ encounters directory blocks that lack sufficient empty space to add a checksum, it will request that you run ``e2fsck -D`` to have the directories rebuilt with checksums. This has the added benefit of removing slack space from the directory files and rebalancing the htree -indexes. If you \_ignore\_ this step, your directories will not be +indexes. If you _ignore_ this step, your directories will not be protected by a checksum! The following table describes the data elements that go into each type @@ -35,39 +35,39 @@ of checksum. The checksum function is whatever the superblock describes - Length - Ingredients * - Superblock - - \_\_le32 + - __le32 - The entire superblock up to the checksum field. The UUID lives inside the superblock. * - MMP - - \_\_le32 + - __le32 - UUID + the entire MMP block up to the checksum field. * - Extended Attributes - - \_\_le32 + - __le32 - UUID + the entire extended attribute block. The checksum field is set to zero. * - Directory Entries - - \_\_le32 + - __le32 - UUID + inode number + inode generation + the directory block up to the fake entry enclosing the checksum field. * - HTREE Nodes - - \_\_le32 + - __le32 - UUID + inode number + inode generation + all valid extents + HTREE tail. The checksum field is set to zero. * - Extents - - \_\_le32 + - __le32 - UUID + inode number + inode generation + the entire extent block up to the checksum field. * - Bitmaps - - \_\_le32 or \_\_le16 + - __le32 or __le16 - UUID + the entire bitmap. Checksums are stored in the group descriptor, and truncated if the group descriptor size is 32 bytes (i.e. ^64bit) * - Inodes - - \_\_le32 + - __le32 - UUID + inode number + inode generation + the entire inode. The checksum field is set to zero. Each inode has its own checksum. * - Group Descriptors - - \_\_le16 - - If metadata\_csum, then UUID + group number + the entire descriptor; - else if gdt\_csum, then crc16(UUID + group number + the entire + - __le16 + - If metadata_csum, then UUID + group number + the entire descriptor; + else if gdt_csum, then crc16(UUID + group number + the entire descriptor). In all cases, only the lower 16 bits are stored. diff --git a/Documentation/filesystems/ext4/directory.rst b/Documentation/filesystems/ext4/directory.rst index 55f618b..6eece8e 100644 --- a/Documentation/filesystems/ext4/directory.rst +++ b/Documentation/filesystems/ext4/directory.rst @@ -42,24 +42,24 @@ is at most 263 bytes long, though on disk you'll need to reference - Name - Description * - 0x0 - - \_\_le32 + - __le32 - inode - Number of the inode that this directory entry points to. * - 0x4 - - \_\_le16 - - rec\_len + - __le16 + - rec_len - Length of this directory entry. Must be a multiple of 4. * - 0x6 - - \_\_le16 - - name\_len + - __le16 + - name_len - Length of the file name. * - 0x8 - char - - name[EXT4\_NAME\_LEN] + - name[EXT4_NAME_LEN] - File name. Since file names cannot be longer than 255 bytes, the new directory -entry format shortens the name\_len field and uses the space for a file +entry format shortens the name_len field and uses the space for a file type flag, probably to avoid having to load every inode during directory tree traversal. This format is ``ext4_dir_entry_2``, which is at most 263 bytes long, though on disk you'll need to reference @@ -74,24 +74,24 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most - Name - Description * - 0x0 - - \_\_le32 + - __le32 - inode - Number of the inode that this directory entry points to. * - 0x4 - - \_\_le16 - - rec\_len + - __le16 + - rec_len - Length of this directory entry. * - 0x6 - - \_\_u8 - - name\_len + - __u8 + - name_len - Length of the file name. * - 0x7 - - \_\_u8 - - file\_type + - __u8 + - file_type - File type code, see ftype_ table below. * - 0x8 - char - - name[EXT4\_NAME\_LEN] + - name[EXT4_NAME_LEN] - File name. .. _ftype: @@ -137,19 +137,19 @@ entry uses this extension, it may be up to 271 bytes. - Name - Description * - 0x0 - - \_\_le32 + - __le32 - hash - The hash of the directory name * - 0x4 - - \_\_le32 - - minor\_hash + - __le32 + - minor_hash - The minor hash of the directory name In order to add checksums to these classic directory blocks, a phony ``struct ext4_dir_entry`` is placed at the end of each leaf block to hold the checksum. The directory entry is 12 bytes long. The inode -number and name\_len fields are set to zero to fool old software into +number and name_len fields are set to zero to fool old software into ignoring an apparently empty directory entry, and the checksum is stored in the place where the name normally goes. The structure is ``struct ext4_dir_entry_tail``: @@ -163,24 +163,24 @@ in the place where the name normally goes. The structure is - Name - Description * - 0x0 - - \_\_le32 - - det\_reserved\_zero1 + - __le32 + - det_reserved_zero1 - Inode number, which must be zero. * - 0x4 - - \_\_le16 - - det\_rec\_len + - __le16 + - det_rec_len - Length of this directory entry, which must be 12. * - 0x6 - - \_\_u8 - - det\_reserved\_zero2 + - __u8 + - det_reserved_zero2 - Length of the file name, which must be zero. * - 0x7 - - \_\_u8 - - det\_reserved\_ft + - __u8 + - det_reserved_ft - File type, which must be 0xDE. * - 0x8 - - \_\_le32 - - det\_checksum + - __le32 + - det_checksum - Directory leaf block checksum. The leaf directory block checksum is calculated against the FS UUID, the @@ -194,7 +194,7 @@ Hash Tree Directories A linear array of directory entries isn't great for performance, so a new feature was added to ext3 to provide a faster (but peculiar) balanced tree keyed off a hash of the directory entry name. If the -EXT4\_INDEX\_FL (0x1000) flag is set in the inode, this directory uses a +EXT4_INDEX_FL (0x1000) flag is set in the inode, this directory uses a hashed btree (htree) to organize and find directory entries. For backwards read-only compatibility with ext2, this tree is actually hidden inside the directory file, masquerading as “empty” directory data @@ -206,14 +206,14 @@ rest of the directory block is empty so that it moves on. The root of the tree always lives in the first data block of the directory. By ext2 custom, the '.' and '..' entries must appear at the beginning of this first block, so they are put here as two -``struct ext4_dir_entry_2``\ s and not stored in the tree. The rest of +``struct ext4_dir_entry_2`` s and not stored in the tree. The rest of the root node contains metadata about the tree and finally a hash->block map to find nodes that are lower in the htree. If ``dx_root.info.indirect_levels`` is non-zero then the htree has two levels; the data block pointed to by the root node's map is an interior node, which is indexed by a minor hash. Interior nodes in this tree contains a zeroed out ``struct ext4_dir_entry_2`` followed by a -minor\_hash->block map to find leafe nodes. Leaf nodes contain a linear +minor_hash->block map to find leafe nodes. Leaf nodes contain a linear array of all ``struct ext4_dir_entry_2``; all of these entries (presumably) hash to the same value. If there is an overflow, the entries simply overflow into the next leaf node, and the @@ -245,83 +245,83 @@ of a data block: - Name - Description * - 0x0 - - \_\_le32 + - __le32 - dot.inode - inode number of this directory. * - 0x4 - - \_\_le16 - - dot.rec\_len + - __le16 + - dot.rec_len - Length of this record, 12. * - 0x6 - u8 - - dot.name\_len + - dot.name_len - Length of the name, 1. * - 0x7 - u8 - - dot.file\_type + - dot.file_type - File type of this entry, 0x2 (directory) (if the feature flag is set). * - 0x8 - char - dot.name[4] - - “.\\0\\0\\0” + - “.\0\0\0” * - 0xC - - \_\_le32 + - __le32 - dotdot.inode - inode number of parent directory. * - 0x10 - - \_\_le16 - - dotdot.rec\_len - - block\_size - 12. The record length is long enough to cover all htree + - __le16 + - dotdot.rec_len + - block_size - 12. The record length is long enough to cover all htree data. * - 0x12 - u8 - - dotdot.name\_len + - dotdot.name_len - Length of the name, 2. * - 0x13 - u8 - - dotdot.file\_type + - dotdot.file_type - File type of this entry, 0x2 (directory) (if the feature flag is set). * - 0x14 - char - - dotdot\_name[4] - - “..\\0\\0” + - dotdot_name[4] + - “..\0\0” * - 0x18 - - \_\_le32 - - struct dx\_root\_info.reserved\_zero + - __le32 + - struct dx_root_info.reserved_zero - Zero. * - 0x1C - u8 - - struct dx\_root\_info.hash\_version + - struct dx_root_info.hash_version - Hash type, see dirhash_ table below. * - 0x1D - u8 - - struct dx\_root\_info.info\_length + - struct dx_root_info.info_length - Length of the tree information, 0x8. * - 0x1E - u8 - - struct dx\_root\_info.indirect\_levels - - Depth of the htree. Cannot be larger than 3 if the INCOMPAT\_LARGEDIR + - struct dx_root_info.indirect_levels + - Depth of the htree. Cannot be larger than 3 if the INCOMPAT_LARGEDIR feature is set; cannot be larger than 2 otherwise. * - 0x1F - u8 - - struct dx\_root\_info.unused\_flags + - struct dx_root_info.unused_flags - * - 0x20 - - \_\_le16 + - __le16 - limit - - Maximum number of dx\_entries that can follow this header, plus 1 for + - Maximum number of dx_entries that can follow this header, plus 1 for the header itself. * - 0x22 - - \_\_le16 + - __le16 - count - - Actual number of dx\_entries that follow this header, plus 1 for the + - Actual number of dx_entries that follow this header, plus 1 for the header itself. * - 0x24 - - \_\_le32 + - __le32 - block - The block number (within the directory file) that goes with hash=0. * - 0x28 - - struct dx\_entry + - struct dx_entry - entries[0] - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. @@ -362,38 +362,38 @@ also the full length of a data block: - Name - Description * - 0x0 - - \_\_le32 + - __le32 - fake.inode - Zero, to make it look like this entry is not in use. * - 0x4 - - \_\_le16 - - fake.rec\_len - - The size of the block, in order to hide all of the dx\_node data. + - __le16 + - fake.rec_len + - The size of the block, in order to hide all of the dx_node data. * - 0x6 - u8 - - name\_len + - name_len - Zero. There is no name for this “unused” directory entry. * - 0x7 - u8 - - file\_type + - file_type - Zero. There is no file type for this “unused” directory entry. * - 0x8 - - \_\_le16 + - __le16 - limit - - Maximum number of dx\_entries that can follow this header, plus 1 for + - Maximum number of dx_entries that can follow this header, plus 1 for the header itself. * - 0xA - - \_\_le16 + - __le16 - count - - Actual number of dx\_entries that follow this header, plus 1 for the + - Actual number of dx_entries that follow this header, plus 1 for the header itself. * - 0xE - - \_\_le32 + - __le32 - block - The block number (within the directory file) that goes with the lowest hash value of this block. This value is stored in the parent block. * - 0x12 - - struct dx\_entry + - struct dx_entry - entries[0] - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. @@ -410,11 +410,11 @@ long: - Name - Description * - 0x0 - - \_\_le32 + - __le32 - hash - Hash code. * - 0x4 - - \_\_le32 + - __le32 - block - Block number (within the directory file, not filesystem blocks) of the next node in the htree. @@ -423,13 +423,13 @@ long: author.) If metadata checksums are enabled, the last 8 bytes of the directory -block (precisely the length of one dx\_entry) are used to store a +block (precisely the length of one dx_entry) are used to store a ``struct dx_tail``, which contains the checksum. The ``limit`` and -``count`` entries in the dx\_root/dx\_node structures are adjusted as -necessary to fit the dx\_tail into the block. If there is no space for -the dx\_tail, the user is notified to run e2fsck -D to rebuild the +``count`` entries in the dx_root/dx_node structures are adjusted as +necessary to fit the dx_tail into the block. If there is no space for +the dx_tail, the user is notified to run e2fsck -D to rebuild the directory index (which will ensure that there's space for the checksum. -The dx\_tail structure is 8 bytes long and looks like this: +The dx_tail structure is 8 bytes long and looks like this: .. list-table:: :widths: 8 8 24 40 @@ -441,13 +441,13 @@ The dx\_tail structure is 8 bytes long and looks like this: - Description * - 0x0 - u32 - - dt\_reserved + - dt_reserved - Zero. * - 0x4 - - \_\_le32 - - dt\_checksum + - __le32 + - dt_checksum - Checksum of the htree directory block. The checksum is calculated against the FS UUID, the htree index header -(dx\_root or dx\_node), all of the htree indices (dx\_entry) that are in -use, and the tail block (dx\_tail). +(dx_root or dx_node), all of the htree indices (dx_entry) that are in +use, and the tail block (dx_tail). diff --git a/Documentation/filesystems/ext4/eainode.rst b/Documentation/filesystems/ext4/eainode.rst index ecc0d01..7a2ef26 100644 --- a/Documentation/filesystems/ext4/eainode.rst +++ b/Documentation/filesystems/ext4/eainode.rst @@ -5,14 +5,14 @@ Large Extended Attribute Values To enable ext4 to store extended attribute values that do not fit in the inode or in the single extended attribute block attached to an inode, -the EA\_INODE feature allows us to store the value in the data blocks of +the EA_INODE feature allows us to store the value in the data blocks of a regular file inode. This “EA inode” is linked only from the extended attribute name index and must not appear in a directory entry. The -inode's i\_atime field is used to store a checksum of the xattr value; -and i\_ctime/i\_version store a 64-bit reference count, which enables +inode's i_atime field is used to store a checksum of the xattr value; +and i_ctime/i_version store a 64-bit reference count, which enables sharing of large xattr values between multiple owning inodes. For backward compatibility with older versions of this feature, the -i\_mtime/i\_generation *may* store a back-reference to the inode number -and i\_generation of the **one** owning inode (in cases where the EA +i_mtime/i_generation *may* store a back-reference to the inode number +and i_generation of the **one** owning inode (in cases where the EA inode is not referenced by multiple inodes) to verify that the EA inode is the correct one being accessed. diff --git a/Documentation/filesystems/ext4/group_descr.rst b/Documentation/filesystems/ext4/group_descr.rst index 7ba6114..392ec44 100644 --- a/Documentation/filesystems/ext4/group_descr.rst +++ b/Documentation/filesystems/ext4/group_descr.rst @@ -7,34 +7,34 @@ Each block group on the filesystem has one of these descriptors associated with it. As noted in the Layout section above, the group descriptors (if present) are the second item in the block group. The standard configuration is for each block group to contain a full copy of -the block group descriptor table unless the sparse\_super feature flag +the block group descriptor table unless the sparse_super feature flag is set. Notice how the group descriptor records the location of both bitmaps and the inode table (i.e. they can float). This means that within a block group, the only data structures with fixed locations are the superblock -and the group descriptor table. The flex\_bg mechanism uses this +and the group descriptor table. The flex_bg mechanism uses this property to group several block groups into a flex group and lay out all of the groups' bitmaps and inode tables into one long run in the first group of the flex group. -If the meta\_bg feature flag is set, then several block groups are -grouped together into a meta group. Note that in the meta\_bg case, +If the meta_bg feature flag is set, then several block groups are +grouped together into a meta group. Note that in the meta_bg case, however, the first and last two block groups within the larger meta group contain only group descriptors for the groups inside the meta group. -flex\_bg and meta\_bg do not appear to be mutually exclusive features. +flex_bg and meta_bg do not appear to be mutually exclusive features. In ext2, ext3, and ext4 (when the 64bit feature is not enabled), the block group descriptor was only 32 bytes long and therefore ends at -bg\_checksum. On an ext4 filesystem with the 64bit feature enabled, the +bg_checksum. On an ext4 filesystem with the 64bit feature enabled, the block group descriptor expands to at least the 64 bytes described below; the size is stored in the superblock. -If gdt\_csum is set and metadata\_csum is not set, the block group +If gdt_csum is set and metadata_csum is not set, the block group checksum is the crc16 of the FS UUID, the group number, and the group -descriptor structure. If metadata\_csum is set, then the block group +descriptor structure. If metadata_csum is set, then the block group checksum is the lower 16 bits of the checksum of the FS UUID, the group number, and the group descriptor structure. Both block and inode bitmap checksums are calculated against the FS UUID, the group number, and the @@ -51,59 +51,59 @@ The block group descriptor is laid out in ``struct ext4_group_desc``. - Name - Description * - 0x0 - - \_\_le32 - - bg\_block\_bitmap\_lo + - __le32 + - bg_block_bitmap_lo - Lower 32-bits of location of block bitmap. * - 0x4 - - \_\_le32 - - bg\_inode\_bitmap\_lo + - __le32 + - bg_inode_bitmap_lo - Lower 32-bits of location of inode bitmap. * - 0x8 - - \_\_le32 - - bg\_inode\_table\_lo + - __le32 + - bg_inode_table_lo - Lower 32-bits of location of inode table. * - 0xC - - \_\_le16 - - bg\_free\_blocks\_count\_lo + - __le16 + - bg_free_blocks_count_lo - Lower 16-bits of free block count. * - 0xE - - \_\_le16 - - bg\_free\_inodes\_count\_lo + - __le16 + - bg_free_inodes_count_lo - Lower 16-bits of free inode count. * - 0x10 - - \_\_le16 - - bg\_used\_dirs\_count\_lo + - __le16 + - bg_used_dirs_count_lo - Lower 16-bits of directory count. * - 0x12 - - \_\_le16 - - bg\_flags + - __le16 + - bg_flags - Block group flags. See the bgflags_ table below. * - 0x14 - - \_\_le32 - - bg\_exclude\_bitmap\_lo + - __le32 + - bg_exclude_bitmap_lo - Lower 32-bits of location of snapshot exclusion bitmap. * - 0x18 - - \_\_le16 - - bg\_block\_bitmap\_csum\_lo + - __le16 + - bg_block_bitmap_csum_lo - Lower 16-bits of the block bitmap checksum. * - 0x1A - - \_\_le16 - - bg\_inode\_bitmap\_csum\_lo + - __le16 + - bg_inode_bitmap_csum_lo - Lower 16-bits of the inode bitmap checksum. * - 0x1C - - \_\_le16 - - bg\_itable\_unused\_lo + - __le16 + - bg_itable_unused_lo - Lower 16-bits of unused inode count. If set, we needn't scan past the - ``(sb.s_inodes_per_group - gdt.bg_itable_unused)``\ th entry in the + ``(sb.s_inodes_per_group - gdt.bg_itable_unused)`` th entry in the inode table for this group. * - 0x1E - - \_\_le16 - - bg\_checksum - - Group descriptor checksum; crc16(sb\_uuid+group\_num+bg\_desc) if the - RO\_COMPAT\_GDT\_CSUM feature is set, or - crc32c(sb\_uuid+group\_num+bg\_desc) & 0xFFFF if the - RO\_COMPAT\_METADATA\_CSUM feature is set. The bg\_checksum - field in bg\_desc is skipped when calculating crc16 checksum, + - __le16 + - bg_checksum + - Group descriptor checksum; crc16(sb_uuid+group_num+bg_desc) if the + RO_COMPAT_GDT_CSUM feature is set, or + crc32c(sb_uuid+group_num+bg_desc) & 0xFFFF if the + RO_COMPAT_METADATA_CSUM feature is set. The bg_checksum + field in bg_desc is skipped when calculating crc16 checksum, and set to zero if crc32c checksum is used. * - - @@ -111,48 +111,48 @@ The block group descriptor is laid out in ``struct ext4_group_desc``. - These fields only exist if the 64bit feature is enabled and s_desc_size > 32. * - 0x20 - - \_\_le32 - - bg\_block\_bitmap\_hi + - __le32 + - bg_block_bitmap_hi - Upper 32-bits of location of block bitmap. * - 0x24 - - \_\_le32 - - bg\_inode\_bitmap\_hi + - __le32 + - bg_inode_bitmap_hi - Upper 32-bits of location of inodes bitmap. * - 0x28 - - \_\_le32 - - bg\_inode\_table\_hi + - __le32 + - bg_inode_table_hi - Upper 32-bits of location of inodes table. * - 0x2C - - \_\_le16 - - bg\_free\_blocks\_count\_hi + - __le16 + - bg_free_blocks_count_hi - Upper 16-bits of free block count. * - 0x2E - - \_\_le16 - - bg\_free\_inodes\_count\_hi + - __le16 + - bg_free_inodes_count_hi - Upper 16-bits of free inode count. * - 0x30 - - \_\_le16 - - bg\_used\_dirs\_count\_hi + - __le16 + - bg_used_dirs_count_hi - Upper 16-bits of directory count. * - 0x32 - - \_\_le16 - - bg\_itable\_unused\_hi + - __le16 + - bg_itable_unused_hi - Upper 16-bits of unused inode count. * - 0x34 - - \_\_le32 - - bg\_exclude\_bitmap\_hi + - __le32 + - bg_exclude_bitmap_hi - Upper 32-bits of location of snapshot exclusion bitmap. * - 0x38 - - \_\_le16 - - bg\_block\_bitmap\_csum\_hi + - __le16 + - bg_block_bitmap_csum_hi - Upper 16-bits of the block bitmap checksum. * - 0x3A - - \_\_le16 - - bg\_inode\_bitmap\_csum\_hi + - __le16 + - bg_inode_bitmap_csum_hi - Upper 16-bits of the inode bitmap checksum. * - 0x3C - - \_\_u32 - - bg\_reserved + - __u32 + - bg_reserved - Padding to 64 bytes. .. _bgflags: @@ -166,8 +166,8 @@ Block group flags can be any combination of the following: * - Value - Description * - 0x1 - - inode table and bitmap are not initialized (EXT4\_BG\_INODE\_UNINIT). + - inode table and bitmap are not initialized (EXT4_BG_INODE_UNINIT). * - 0x2 - - block bitmap is not initialized (EXT4\_BG\_BLOCK\_UNINIT). + - block bitmap is not initialized (EXT4_BG_BLOCK_UNINIT). * - 0x4 - - inode table is zeroed (EXT4\_BG\_INODE\_ZEROED). + - inode table is zeroed (EXT4_BG_INODE_ZEROED). diff --git a/Documentation/filesystems/ext4/ifork.rst b/Documentation/filesystems/ext4/ifork.rst index b9816d5..dc31f50 100644 --- a/Documentation/filesystems/ext4/ifork.rst +++ b/Documentation/filesystems/ext4/ifork.rst @@ -1,6 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0 -The Contents of inode.i\_block +The Contents of inode.i_block ------------------------------ Depending on the type of file an inode describes, the 60 bytes of @@ -47,7 +47,7 @@ In ext4, the file to logical block map has been replaced with an extent tree. Under the old scheme, allocating a contiguous run of 1,000 blocks requires an indirect block to map all 1,000 entries; with extents, the mapping is reduced to a single ``struct ext4_extent`` with -``ee_len = 1000``. If flex\_bg is enabled, it is possible to allocate +``ee_len = 1000``. If flex_bg is enabled, it is possible to allocate very large files with a single extent, at a considerable reduction in metadata block use, and some improvement in disk efficiency. The inode must have the extents flag (0x80000) flag set for this feature to be in @@ -76,28 +76,28 @@ which is 12 bytes long: - Name - Description * - 0x0 - - \_\_le16 - - eh\_magic + - __le16 + - eh_magic - Magic number, 0xF30A. * - 0x2 - - \_\_le16 - - eh\_entries + - __le16 + - eh_entries - Number of valid entries following the header. * - 0x4 - - \_\_le16 - - eh\_max + - __le16 + - eh_max - Maximum number of entries that could follow the header. * - 0x6 - - \_\_le16 - - eh\_depth + - __le16 + - eh_depth - Depth of this extent node in the extent tree. 0 = this extent node points to data blocks; otherwise, this extent node points to other extent nodes. The extent tree can be at most 5 levels deep: a logical block number can be at most ``2^32``, and the smallest ``n`` that satisfies ``4*(((blocksize - 12)/12)^n) >= 2^32`` is 5. * - 0x8 - - \_\_le32 - - eh\_generation + - __le32 + - eh_generation - Generation of the tree. (Used by Lustre, but not standard ext4). Internal nodes of the extent tree, also known as index nodes, are @@ -112,22 +112,22 @@ recorded as ``struct ext4_extent_idx``, and are 12 bytes long: - Name - Description * - 0x0 - - \_\_le32 - - ei\_block + - __le32 + - ei_block - This index node covers file blocks from 'block' onward. * - 0x4 - - \_\_le32 - - ei\_leaf\_lo + - __le32 + - ei_leaf_lo - Lower 32-bits of the block number of the extent node that is the next level lower in the tree. The tree node pointed to can be either another internal node or a leaf node, described below. * - 0x8 - - \_\_le16 - - ei\_leaf\_hi + - __le16 + - ei_leaf_hi - Upper 16-bits of the previous field. * - 0xA - - \_\_u16 - - ei\_unused + - __u16 + - ei_unused - Leaf nodes of the extent tree are recorded as ``struct ext4_extent``, @@ -142,24 +142,24 @@ and are also 12 bytes long: - Name - Description * - 0x0 - - \_\_le32 - - ee\_block + - __le32 + - ee_block - First file block number that this extent covers. * - 0x4 - - \_\_le16 - - ee\_len + - __le16 + - ee_len - Number of blocks covered by extent. If the value of this field is <= 32768, the extent is initialized. If the value of the field is > 32768, the extent is uninitialized and the actual extent length is ``ee_len`` - 32768. Therefore, the maximum length of a initialized extent is 32768 blocks, and the maximum length of an uninitialized extent is 32767. * - 0x6 - - \_\_le16 - - ee\_start\_hi + - __le16 + - ee_start_hi - Upper 16-bits of the block number to which this extent points. * - 0x8 - - \_\_le32 - - ee\_start\_lo + - __le32 + - ee_start_lo - Lower 32-bits of the block number to which this extent points. Prior to the introduction of metadata checksums, the extent header + @@ -182,8 +182,8 @@ including) the checksum itself. - Name - Description * - 0x0 - - \_\_le32 - - eb\_checksum + - __le32 + - eb_checksum - Checksum of the extent block, crc32c(uuid+inum+igeneration+extentblock) Inline Data diff --git a/Documentation/filesystems/ext4/inlinedata.rst b/Documentation/filesystems/ext4/inlinedata.rst index d107517..a728af0d 100644 --- a/Documentation/filesystems/ext4/inlinedata.rst +++ b/Documentation/filesystems/ext4/inlinedata.rst @@ -11,12 +11,12 @@ file is smaller than 60 bytes, then the data are stored inline in attribute space, then it might be found as an extended attribute “system.data” within the inode body (“ibody EA”). This of course constrains the amount of extended attributes one can attach to an inode. -If the data size increases beyond i\_block + ibody EA, a regular block +If the data size increases beyond i_block + ibody EA, a regular block is allocated and the contents moved to that block. Pending a change to compact the extended attribute key used to store inline data, one ought to be able to store 160 bytes of data in a -256-byte inode (as of June 2015, when i\_extra\_isize is 28). Prior to +256-byte inode (as of June 2015, when i_extra_isize is 28). Prior to that, the limit was 156 bytes due to inefficient use of inode space. The inline data feature requires the presence of an extended attribute @@ -25,12 +25,12 @@ for “system.data”, even if the attribute value is zero length. Inline Directories ~~~~~~~~~~~~~~~~~~ -The first four bytes of i\_block are the inode number of the parent +The first four bytes of i_block are the inode number of the parent directory. Following that is a 56-byte space for an array of directory entries; see ``struct ext4_dir_entry``. If there is a “system.data” attribute in the inode body, the EA value is an array of ``struct ext4_dir_entry`` as well. Note that for inline directories, the -i\_block and EA space are treated as separate dirent blocks; directory +i_block and EA space are treated as separate dirent blocks; directory entries cannot span the two. Inline directory entries are not checksummed, as the inode checksum diff --git a/Documentation/filesystems/ext4/inodes.rst b/Documentation/filesystems/ext4/inodes.rst index 6c5ce666..cfc6c16 100644 --- a/Documentation/filesystems/ext4/inodes.rst +++ b/Documentation/filesystems/ext4/inodes.rst @@ -38,138 +38,138 @@ The inode table entry is laid out in ``struct ext4_inode``. - Name - Description * - 0x0 - - \_\_le16 - - i\_mode + - __le16 + - i_mode - File mode. See the table i_mode_ below. * - 0x2 - - \_\_le16 - - i\_uid + - __le16 + - i_uid - Lower 16-bits of Owner UID. * - 0x4 - - \_\_le32 - - i\_size\_lo + - __le32 + - i_size_lo - Lower 32-bits of size in bytes. * - 0x8 - - \_\_le32 - - i\_atime - - Last access time, in seconds since the epoch. However, if the EA\_INODE + - __le32 + - i_atime + - Last access time, in seconds since the epoch. However, if the EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the checksum of the value. * - 0xC - - \_\_le32 - - i\_ctime + - __le32 + - i_ctime - Last inode change time, in seconds since the epoch. However, if the - EA\_INODE inode flag is set, this inode stores an extended attribute + EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the lower 32 bits of the attribute value's reference count. * - 0x10 - - \_\_le32 - - i\_mtime + - __le32 + - i_mtime - Last data modification time, in seconds since the epoch. However, if the - EA\_INODE inode flag is set, this inode stores an extended attribute + EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the number of the inode that owns the extended attribute. * - 0x14 - - \_\_le32 - - i\_dtime + - __le32 + - i_dtime - Deletion Time, in seconds since the epoch. * - 0x18 - - \_\_le16 - - i\_gid + - __le16 + - i_gid - Lower 16-bits of GID. * - 0x1A - - \_\_le16 - - i\_links\_count + - __le16 + - i_links_count - Hard link count. Normally, ext4 does not permit an inode to have more than 65,000 hard links. This applies to files as well as directories, which means that there cannot be more than 64,998 subdirectories in a directory (each subdirectory's '..' entry counts as a hard link, as does - the '.' entry in the directory itself). With the DIR\_NLINK feature + the '.' entry in the directory itself). With the DIR_NLINK feature enabled, ext4 supports more than 64,998 subdirectories by setting this field to 1 to indicate that the number of hard links is not known. * - 0x1C - - \_\_le32 - - i\_blocks\_lo - - Lower 32-bits of “block” count. If the huge\_file feature flag is not + - __le32 + - i_blocks_lo + - Lower 32-bits of “block” count. If the huge_file feature flag is not set on the filesystem, the file consumes ``i_blocks_lo`` 512-byte blocks - on disk. If huge\_file is set and EXT4\_HUGE\_FILE\_FL is NOT set in + on disk. If huge_file is set and EXT4_HUGE_FILE_FL is NOT set in ``inode.i_flags``, then the file consumes ``i_blocks_lo + (i_blocks_hi - << 32)`` 512-byte blocks on disk. If huge\_file is set and - EXT4\_HUGE\_FILE\_FL IS set in ``inode.i_flags``, then this file + << 32)`` 512-byte blocks on disk. If huge_file is set and + EXT4_HUGE_FILE_FL IS set in ``inode.i_flags``, then this file consumes (``i_blocks_lo + i_blocks_hi`` << 32) filesystem blocks on disk. * - 0x20 - - \_\_le32 - - i\_flags + - __le32 + - i_flags - Inode flags. See the table i_flags_ below. * - 0x24 - 4 bytes - - i\_osd1 + - i_osd1 - See the table i_osd1_ for more details. * - 0x28 - 60 bytes - - i\_block[EXT4\_N\_BLOCKS=15] - - Block map or extent tree. See the section “The Contents of inode.i\_block”. + - i_block[EXT4_N_BLOCKS=15] + - Block map or extent tree. See the section “The Contents of inode.i_block”. * - 0x64 - - \_\_le32 - - i\_generation + - __le32 + - i_generation - File version (for NFS). * - 0x68 - - \_\_le32 - - i\_file\_acl\_lo + - __le32 + - i_file_acl_lo - Lower 32-bits of extended attribute block. ACLs are of course one of many possible extended attributes; I think the name of this field is a result of the first use of extended attributes being for ACLs. * - 0x6C - - \_\_le32 - - i\_size\_high / i\_dir\_acl + - __le32 + - i_size_high / i_dir_acl - Upper 32-bits of file/directory size. In ext2/3 this field was named - i\_dir\_acl, though it was usually set to zero and never used. + i_dir_acl, though it was usually set to zero and never used. * - 0x70 - - \_\_le32 - - i\_obso\_faddr + - __le32 + - i_obso_faddr - (Obsolete) fragment address. * - 0x74 - 12 bytes - - i\_osd2 + - i_osd2 - See the table i_osd2_ for more details. * - 0x80 - - \_\_le16 - - i\_extra\_isize + - __le16 + - i_extra_isize - Size of this inode - 128. Alternately, the size of the extended inode fields beyond the original ext2 inode, including this field. * - 0x82 - - \_\_le16 - - i\_checksum\_hi + - __le16 + - i_checksum_hi - Upper 16-bits of the inode checksum. * - 0x84 - - \_\_le32 - - i\_ctime\_extra + - __le32 + - i_ctime_extra - Extra change time bits. This provides sub-second precision. See Inode Timestamps section. * - 0x88 - - \_\_le32 - - i\_mtime\_extra + - __le32 + - i_mtime_extra - Extra modification time bits. This provides sub-second precision. * - 0x8C - - \_\_le32 - - i\_atime\_extra + - __le32 + - i_atime_extra - Extra access time bits. This provides sub-second precision. * - 0x90 - - \_\_le32 - - i\_crtime + - __le32 + - i_crtime - File creation time, in seconds since the epoch. * - 0x94 - - \_\_le32 - - i\_crtime\_extra + - __le32 + - i_crtime_extra - Extra file creation time bits. This provides sub-second precision. * - 0x98 - - \_\_le32 - - i\_version\_hi + - __le32 + - i_version_hi - Upper 32-bits for version number. * - 0x9C - - \_\_le32 - - i\_projid + - __le32 + - i_projid - Project ID. .. _i_mode: @@ -183,45 +183,45 @@ The ``i_mode`` value is a combination of the following flags: * - Value - Description * - 0x1 - - S\_IXOTH (Others may execute) + - S_IXOTH (Others may execute) * - 0x2 - - S\_IWOTH (Others may write) + - S_IWOTH (Others may write) * - 0x4 - - S\_IROTH (Others may read) + - S_IROTH (Others may read) * - 0x8 - - S\_IXGRP (Group members may execute) + - S_IXGRP (Group members may execute) * - 0x10 - - S\_IWGRP (Group members may write) + - S_IWGRP (Group members may write) * - 0x20 - - S\_IRGRP (Group members may read) + - S_IRGRP (Group members may read) * - 0x40 - - S\_IXUSR (Owner may execute) + - S_IXUSR (Owner may execute) * - 0x80 - - S\_IWUSR (Owner may write) + - S_IWUSR (Owner may write) * - 0x100 - - S\_IRUSR (Owner may read) + - S_IRUSR (Owner may read) * - 0x200 - - S\_ISVTX (Sticky bit) + - S_ISVTX (Sticky bit) * - 0x400 - - S\_ISGID (Set GID) + - S_ISGID (Set GID) * - 0x800 - - S\_ISUID (Set UID) + - S_ISUID (Set UID) * - - These are mutually-exclusive file types: * - 0x1000 - - S\_IFIFO (FIFO) + - S_IFIFO (FIFO) * - 0x2000 - - S\_IFCHR (Character device) + - S_IFCHR (Character device) * - 0x4000 - - S\_IFDIR (Directory) + - S_IFDIR (Directory) * - 0x6000 - - S\_IFBLK (Block device) + - S_IFBLK (Block device) * - 0x8000 - - S\_IFREG (Regular file) + - S_IFREG (Regular file) * - 0xA000 - - S\_IFLNK (Symbolic link) + - S_IFLNK (Symbolic link) * - 0xC000 - - S\_IFSOCK (Socket) + - S_IFSOCK (Socket) .. _i_flags: @@ -234,56 +234,56 @@ The ``i_flags`` field is a combination of these values: * - Value - Description * - 0x1 - - This file requires secure deletion (EXT4\_SECRM\_FL). (not implemented) + - This file requires secure deletion (EXT4_SECRM_FL). (not implemented) * - 0x2 - This file should be preserved, should undeletion be desired - (EXT4\_UNRM\_FL). (not implemented) + (EXT4_UNRM_FL). (not implemented) * - 0x4 - - File is compressed (EXT4\_COMPR\_FL). (not really implemented) + - File is compressed (EXT4_COMPR_FL). (not really implemented) * - 0x8 - - All writes to the file must be synchronous (EXT4\_SYNC\_FL). + - All writes to the file must be synchronous (EXT4_SYNC_FL). * - 0x10 - - File is immutable (EXT4\_IMMUTABLE\_FL). + - File is immutable (EXT4_IMMUTABLE_FL). * - 0x20 - - File can only be appended (EXT4\_APPEND\_FL). + - File can only be appended (EXT4_APPEND_FL). * - 0x40 - - The dump(1) utility should not dump this file (EXT4\_NODUMP\_FL). + - The dump(1) utility should not dump this file (EXT4_NODUMP_FL). * - 0x80 - - Do not update access time (EXT4\_NOATIME\_FL). + - Do not update access time (EXT4_NOATIME_FL). * - 0x100 - - Dirty compressed file (EXT4\_DIRTY\_FL). (not used) + - Dirty compressed file (EXT4_DIRTY_FL). (not used) * - 0x200 - - File has one or more compressed clusters (EXT4\_COMPRBLK\_FL). (not used) + - File has one or more compressed clusters (EXT4_COMPRBLK_FL). (not used) * - 0x400 - - Do not compress file (EXT4\_NOCOMPR\_FL). (not used) + - Do not compress file (EXT4_NOCOMPR_FL). (not used) * - 0x800 - - Encrypted inode (EXT4\_ENCRYPT\_FL). This bit value previously was - EXT4\_ECOMPR\_FL (compression error), which was never used. + - Encrypted inode (EXT4_ENCRYPT_FL). This bit value previously was + EXT4_ECOMPR_FL (compression error), which was never used. * - 0x1000 - - Directory has hashed indexes (EXT4\_INDEX\_FL). + - Directory has hashed indexes (EXT4_INDEX_FL). * - 0x2000 - - AFS magic directory (EXT4\_IMAGIC\_FL). + - AFS magic directory (EXT4_IMAGIC_FL). * - 0x4000 - File data must always be written through the journal - (EXT4\_JOURNAL\_DATA\_FL). + (EXT4_JOURNAL_DATA_FL). * - 0x8000 - - File tail should not be merged (EXT4\_NOTAIL\_FL). (not used by ext4) + - File tail should not be merged (EXT4_NOTAIL_FL). (not used by ext4) * - 0x10000 - All directory entry data should be written synchronously (see - ``dirsync``) (EXT4\_DIRSYNC\_FL). + ``dirsync``) (EXT4_DIRSYNC_FL). * - 0x20000 - - Top of directory hierarchy (EXT4\_TOPDIR\_FL). + - Top of directory hierarchy (EXT4_TOPDIR_FL). * - 0x40000 - - This is a huge file (EXT4\_HUGE\_FILE\_FL). + - This is a huge file (EXT4_HUGE_FILE_FL). * - 0x80000 - - Inode uses extents (EXT4\_EXTENTS\_FL). + - Inode uses extents (EXT4_EXTENTS_FL). * - 0x100000 - - Verity protected file (EXT4\_VERITY\_FL). + - Verity protected file (EXT4_VERITY_FL). * - 0x200000 - Inode stores a large extended attribute value in its data blocks - (EXT4\_EA\_INODE\_FL). + (EXT4_EA_INODE_FL). * - 0x400000 - - This file has blocks allocated past EOF (EXT4\_EOFBLOCKS\_FL). + - This file has blocks allocated past EOF (EXT4_EOFBLOCKS_FL). (deprecated) * - 0x01000000 - Inode is a snapshot (``EXT4_SNAPFILE_FL``). (not in mainline) @@ -294,21 +294,21 @@ The ``i_flags`` field is a combination of these values: - Snapshot shrink has completed (``EXT4_SNAPFILE_SHRUNK_FL``). (not in mainline) * - 0x10000000 - - Inode has inline data (EXT4\_INLINE\_DATA\_FL). + - Inode has inline data (EXT4_INLINE_DATA_FL). * - 0x20000000 - - Create children with the same project ID (EXT4\_PROJINHERIT\_FL). + - Create children with the same project ID (EXT4_PROJINHERIT_FL). * - 0x80000000 - - Reserved for ext4 library (EXT4\_RESERVED\_FL). + - Reserved for ext4 library (EXT4_RESERVED_FL). * - - Aggregate flags: * - 0x705BDFFF - User-visible flags. * - 0x604BC0FF - - User-modifiable flags. Note that while EXT4\_JOURNAL\_DATA\_FL and - EXT4\_EXTENTS\_FL can be set with setattr, they are not in the kernel's - EXT4\_FL\_USER\_MODIFIABLE mask, since it needs to handle the setting of + - User-modifiable flags. Note that while EXT4_JOURNAL_DATA_FL and + EXT4_EXTENTS_FL can be set with setattr, they are not in the kernel's + EXT4_FL_USER_MODIFIABLE mask, since it needs to handle the setting of these flags in a special manner and they are masked out of the set of - flags that are saved directly to i\_flags. + flags that are saved directly to i_flags. .. _i_osd1: @@ -325,9 +325,9 @@ Linux: - Name - Description * - 0x0 - - \_\_le32 - - l\_i\_version - - Inode version. However, if the EA\_INODE inode flag is set, this inode + - __le32 + - l_i_version + - Inode version. However, if the EA_INODE inode flag is set, this inode stores an extended attribute value and this field contains the upper 32 bits of the attribute value's reference count. @@ -342,8 +342,8 @@ Hurd: - Name - Description * - 0x0 - - \_\_le32 - - h\_i\_translator + - __le32 + - h_i_translator - ?? Masix: @@ -357,8 +357,8 @@ Masix: - Name - Description * - 0x0 - - \_\_le32 - - m\_i\_reserved + - __le32 + - m_i_reserved - ?? .. _i_osd2: @@ -376,30 +376,30 @@ Linux: - Name - Description * - 0x0 - - \_\_le16 - - l\_i\_blocks\_high + - __le16 + - l_i_blocks_high - Upper 16-bits of the block count. Please see the note attached to - i\_blocks\_lo. + i_blocks_lo. * - 0x2 - - \_\_le16 - - l\_i\_file\_acl\_high + - __le16 + - l_i_file_acl_high - Upper 16-bits of the extended attribute block (historically, the file ACL location). See the Extended Attributes section below. * - 0x4 - - \_\_le16 - - l\_i\_uid\_high + - __le16 + - l_i_uid_high - Upper 16-bits of the Owner UID. * - 0x6 - - \_\_le16 - - l\_i\_gid\_high + - __le16 + - l_i_gid_high - Upper 16-bits of the GID. * - 0x8 - - \_\_le16 - - l\_i\_checksum\_lo + - __le16 + - l_i_checksum_lo - Lower 16-bits of the inode checksum. * - 0xA - - \_\_le16 - - l\_i\_reserved + - __le16 + - l_i_reserved - Unused. Hurd: @@ -413,24 +413,24 @@ Hurd: - Name - Description * - 0x0 - - \_\_le16 - - h\_i\_reserved1 + - __le16 + - h_i_reserved1 - ?? * - 0x2 - - \_\_u16 - - h\_i\_mode\_high + - __u16 + - h_i_mode_high - Upper 16-bits of the file mode. * - 0x4 - - \_\_le16 - - h\_i\_uid\_high + - __le16 + - h_i_uid_high - Upper 16-bits of the Owner UID. * - 0x6 - - \_\_le16 - - h\_i\_gid\_high + - __le16 + - h_i_gid_high - Upper 16-bits of the GID. * - 0x8 - - \_\_u32 - - h\_i\_author + - __u32 + - h_i_author - Author code? Masix: @@ -444,17 +444,17 @@ Masix: - Name - Description * - 0x0 - - \_\_le16 - - h\_i\_reserved1 + - __le16 + - h_i_reserved1 - ?? * - 0x2 - - \_\_u16 - - m\_i\_file\_acl\_high + - __u16 + - m_i_file_acl_high - Upper 16-bits of the extended attribute block (historically, the file ACL location). * - 0x4 - - \_\_u32 - - m\_i\_reserved2[2] + - __u32 + - m_i_reserved2[2] - ?? Inode Size @@ -466,11 +466,11 @@ In ext2 and ext3, the inode structure size was fixed at 128 bytes on-disk inode at format time for all inodes in the filesystem to provide space beyond the end of the original ext2 inode. The on-disk inode record size is recorded in the superblock as ``s_inode_size``. The -number of bytes actually used by struct ext4\_inode beyond the original +number of bytes actually used by struct ext4_inode beyond the original 128-byte ext2 inode is recorded in the ``i_extra_isize`` field for each -inode, which allows struct ext4\_inode to grow for a new kernel without +inode, which allows struct ext4_inode to grow for a new kernel without having to upgrade all of the on-disk inodes. Access to fields beyond -EXT2\_GOOD\_OLD\_INODE\_SIZE should be verified to be within +EXT2_GOOD_OLD_INODE_SIZE should be verified to be within ``i_extra_isize``. By default, ext4 inode records are 256 bytes, and (as of August 2019) the inode structure is 160 bytes (``i_extra_isize = 32``). The extra space between the end of the inode @@ -516,7 +516,7 @@ creation time (crtime); this field is 64-bits wide and decoded in the same manner as 64-bit [cma]time. Neither crtime nor dtime are accessible through the regular stat() interface, though debugfs will report them. -We use the 32-bit signed time value plus (2^32 \* (extra epoch bits)). +We use the 32-bit signed time value plus (2^32 * (extra epoch bits)). In other words: .. list-table:: @@ -525,8 +525,8 @@ In other words: * - Extra epoch bits - MSB of 32-bit time - - Adjustment for signed 32-bit to 64-bit tv\_sec - - Decoded 64-bit tv\_sec + - Adjustment for signed 32-bit to 64-bit tv_sec + - Decoded 64-bit tv_sec - valid time range * - 0 0 - 1 diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst index 5fad388..a6bef52 100644 --- a/Documentation/filesystems/ext4/journal.rst +++ b/Documentation/filesystems/ext4/journal.rst @@ -63,8 +63,8 @@ Generally speaking, the journal has this format: :header-rows: 1 * - Superblock - - descriptor\_block (data\_blocks or revocation\_block) [more data or - revocations] commmit\_block + - descriptor_block (data_blocks or revocation_block) [more data or + revocations] commmit_block - [more transactions...] * - - One transaction @@ -93,8 +93,8 @@ superblock. * - 1024 bytes of padding - ext4 Superblock - Journal Superblock - - descriptor\_block (data\_blocks or revocation\_block) [more data or - revocations] commmit\_block + - descriptor_block (data_blocks or revocation_block) [more data or + revocations] commmit_block - [more transactions...] * - - @@ -117,17 +117,17 @@ Every block in the journal starts with a common 12-byte header - Name - Description * - 0x0 - - \_\_be32 - - h\_magic + - __be32 + - h_magic - jbd2 magic number, 0xC03B3998. * - 0x4 - - \_\_be32 - - h\_blocktype + - __be32 + - h_blocktype - Description of what this block contains. See the jbd2_blocktype_ table below. * - 0x8 - - \_\_be32 - - h\_sequence + - __be32 + - h_sequence - The transaction ID that goes with this block. .. _jbd2_blocktype: @@ -177,99 +177,99 @@ which is 1024 bytes long: - - Static information describing the journal. * - 0x0 - - journal\_header\_t (12 bytes) - - s\_header + - journal_header_t (12 bytes) + - s_header - Common header identifying this as a superblock. * - 0xC - - \_\_be32 - - s\_blocksize + - __be32 + - s_blocksize - Journal device block size. * - 0x10 - - \_\_be32 - - s\_maxlen + - __be32 + - s_maxlen - Total number of blocks in this journal. * - 0x14 - - \_\_be32 - - s\_first + - __be32 + - s_first - First block of log information. * - - - - Dynamic information describing the current state of the log. * - 0x18 - - \_\_be32 - - s\_sequence + - __be32 + - s_sequence - First commit ID expected in log. * - 0x1C - - \_\_be32 - - s\_start + - __be32 + - s_start - Block number of the start of log. Contrary to the comments, this field being zero does not imply that the journal is clean! * - 0x20 - - \_\_be32 - - s\_errno - - Error value, as set by jbd2\_journal\_abort(). + - __be32 + - s_errno + - Error value, as set by jbd2_journal_abort(). * - - - - The remaining fields are only valid in a v2 superblock. * - 0x24 - - \_\_be32 - - s\_feature\_compat; + - __be32 + - s_feature_compat; - Compatible feature set. See the table jbd2_compat_ below. * - 0x28 - - \_\_be32 - - s\_feature\_incompat + - __be32 + - s_feature_incompat - Incompatible feature set. See the table jbd2_incompat_ below. * - 0x2C - - \_\_be32 - - s\_feature\_ro\_compat + - __be32 + - s_feature_ro_compat - Read-only compatible feature set. There aren't any of these currently. * - 0x30 - - \_\_u8 - - s\_uuid[16] + - __u8 + - s_uuid[16] - 128-bit uuid for journal. This is compared against the copy in the ext4 super block at mount time. * - 0x40 - - \_\_be32 - - s\_nr\_users + - __be32 + - s_nr_users - Number of file systems sharing this journal. * - 0x44 - - \_\_be32 - - s\_dynsuper + - __be32 + - s_dynsuper - Location of dynamic super block copy. (Not used?) * - 0x48 - - \_\_be32 - - s\_max\_transaction + - __be32 + - s_max_transaction - Limit of journal blocks per transaction. (Not used?) * - 0x4C - - \_\_be32 - - s\_max\_trans\_data + - __be32 + - s_max_trans_data - Limit of data blocks per transaction. (Not used?) * - 0x50 - - \_\_u8 - - s\_checksum\_type + - __u8 + - s_checksum_type - Checksum algorithm used for the journal. See jbd2_checksum_type_ for more info. * - 0x51 - - \_\_u8[3] - - s\_padding2 + - __u8[3] + - s_padding2 - * - 0x54 - - \_\_be32 - - s\_num\_fc\_blocks + - __be32 + - s_num_fc_blocks - Number of fast commit blocks in the journal. * - 0x58 - - \_\_u32 - - s\_padding[42] + - __u32 + - s_padding[42] - * - 0xFC - - \_\_be32 - - s\_checksum + - __be32 + - s_checksum - Checksum of the entire superblock, with this field set to zero. * - 0x100 - - \_\_u8 - - s\_users[16\*48] + - __u8 + - s_users[16*48] - ids of all file systems sharing the log. e2fsprogs/Linux don't allow shared external journals, but I imagine Lustre (or ocfs2?), which use the jbd2 code, might. @@ -286,7 +286,7 @@ The journal compat features are any combination of the following: - Description * - 0x1 - Journal maintains checksums on the data blocks. - (JBD2\_FEATURE\_COMPAT\_CHECKSUM) + (JBD2_FEATURE_COMPAT_CHECKSUM) .. _jbd2_incompat: @@ -299,23 +299,23 @@ The journal incompat features are any combination of the following: * - Value - Description * - 0x1 - - Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE) + - Journal has block revocation records. (JBD2_FEATURE_INCOMPAT_REVOKE) * - 0x2 - Journal can deal with 64-bit block numbers. - (JBD2\_FEATURE\_INCOMPAT\_64BIT) + (JBD2_FEATURE_INCOMPAT_64BIT) * - 0x4 - - Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT) + - Journal commits asynchronously. (JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) * - 0x8 - This journal uses v2 of the checksum on-disk format. Each journal metadata block gets its own checksum, and the block tags in the descriptor table contain checksums for each of the data blocks in the - journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2) + journal. (JBD2_FEATURE_INCOMPAT_CSUM_V2) * - 0x10 - This journal uses v3 of the checksum on-disk format. This is the same as v2, but the journal block tag size is fixed regardless of the size of - block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3) + block numbers. (JBD2_FEATURE_INCOMPAT_CSUM_V3) * - 0x20 - - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) + - Journal has fast commit blocks. (JBD2_FEATURE_INCOMPAT_FAST_COMMIT) .. _jbd2_checksum_type: @@ -355,11 +355,11 @@ Descriptor blocks consume at least 36 bytes, but use a full block: - Name - Descriptor * - 0x0 - - journal\_header\_t + - journal_header_t - (open coded) - Common block header. * - 0xC - - struct journal\_block\_tag\_s + - struct journal_block_tag_s - open coded array[] - Enough tags either to fill up the block or to describe all the data blocks that follow this descriptor block. @@ -367,7 +367,7 @@ Descriptor blocks consume at least 36 bytes, but use a full block: Journal block tags have any of the following formats, depending on which journal feature and block tag flags are set. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is +If JBD2_FEATURE_INCOMPAT_CSUM_V3 is set, the journal block tag is defined as ``struct journal_block_tag3_s``, which looks like the following. The size is 16 or 32 bytes. @@ -380,24 +380,24 @@ following. The size is 16 or 32 bytes. - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_blocknr + - __be32 + - t_blocknr - Lower 32-bits of the location of where the corresponding data block should end up on disk. * - 0x4 - - \_\_be32 - - t\_flags + - __be32 + - t_flags - Flags that go with the descriptor. See the table jbd2_tag_flags_ for more info. * - 0x8 - - \_\_be32 - - t\_blocknr\_high + - __be32 + - t_blocknr_high - Upper 32-bits of the location of where the corresponding data block - should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is + should end up on disk. This is zero if JBD2_FEATURE_INCOMPAT_64BIT is not enabled. * - 0xC - - \_\_be32 - - t\_checksum + - __be32 + - t_checksum - Checksum of the journal UUID, the sequence number, and the data block. * - - @@ -433,7 +433,7 @@ The journal tag flags are any combination of the following: * - 0x8 - This is the last tag in this descriptor block. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag +If JBD2_FEATURE_INCOMPAT_CSUM_V3 is NOT set, the journal block tag is defined as ``struct journal_block_tag_s``, which looks like the following. The size is 8, 12, 24, or 28 bytes: @@ -446,18 +446,18 @@ following. The size is 8, 12, 24, or 28 bytes: - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_blocknr + - __be32 + - t_blocknr - Lower 32-bits of the location of where the corresponding data block should end up on disk. * - 0x4 - - \_\_be16 - - t\_checksum + - __be16 + - t_checksum - Checksum of the journal UUID, the sequence number, and the data block. Note that only the lower 16 bits are stored. * - 0x6 - - \_\_be16 - - t\_flags + - __be16 + - t_flags - Flags that go with the descriptor. See the table jbd2_tag_flags_ for more info. * - @@ -466,8 +466,8 @@ following. The size is 8, 12, 24, or 28 bytes: - This next field is only present if the super block indicates support for 64-bit block numbers. * - 0x8 - - \_\_be32 - - t\_blocknr\_high + - __be32 + - t_blocknr_high - Upper 32-bits of the location of where the corresponding data block should end up on disk. * - @@ -483,8 +483,8 @@ following. The size is 8, 12, 24, or 28 bytes: ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that field. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or -JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a +If JBD2_FEATURE_INCOMPAT_CSUM_V2 or +JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the block is a ``struct jbd2_journal_block_tail``, which looks like this: .. list-table:: @@ -496,8 +496,8 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a - Name - Descriptor * - 0x0 - - \_\_be32 - - t\_checksum + - __be32 + - t_checksum - Checksum of the journal UUID + the descriptor block, with this field set to zero. @@ -538,25 +538,25 @@ length, but use a full block: - Name - Description * - 0x0 - - journal\_header\_t - - r\_header + - journal_header_t + - r_header - Common block header. * - 0xC - - \_\_be32 - - r\_count + - __be32 + - r_count - Number of bytes used in this block. * - 0x10 - - \_\_be32 or \_\_be64 + - __be32 or __be64 - blocks[0] - Blocks to revoke. -After r\_count is a linear array of block numbers that are effectively +After r_count is a linear array of block numbers that are effectively revoked by this transaction. The size of each block number is 8 bytes if the superblock advertises 64-bit block number support, or 4 bytes otherwise. -If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or -JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation +If JBD2_FEATURE_INCOMPAT_CSUM_V2 or +JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the end of the revocation block is a ``struct jbd2_journal_revoke_tail``, which has this format: .. list-table:: @@ -568,8 +568,8 @@ block is a ``struct jbd2_journal_revoke_tail``, which has this format: - Name - Description * - 0x0 - - \_\_be32 - - r\_checksum + - __be32 + - r_checksum - Checksum of the journal UUID + revocation block Commit Block @@ -592,38 +592,38 @@ bytes long (but uses a full block): - Name - Descriptor * - 0x0 - - journal\_header\_s + - journal_header_s - (open coded) - Common block header. * - 0xC - unsigned char - - h\_chksum\_type + - h_chksum_type - The type of checksum to use to verify the integrity of the data blocks in the transaction. See jbd2_checksum_type_ for more info. * - 0xD - unsigned char - - h\_chksum\_size + - h_chksum_size - The number of bytes used by the checksum. Most likely 4. * - 0xE - unsigned char - - h\_padding[2] + - h_padding[2] - * - 0x10 - - \_\_be32 - - h\_chksum[JBD2\_CHECKSUM\_BYTES] + - __be32 + - h_chksum[JBD2_CHECKSUM_BYTES] - 32 bytes of space to store checksums. If - JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 + JBD2_FEATURE_INCOMPAT_CSUM_V2 or JBD2_FEATURE_INCOMPAT_CSUM_V3 are set, the first ``__be32`` is the checksum of the journal UUID and the entire commit block, with this field zeroed. If - JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the + JBD2_FEATURE_COMPAT_CHECKSUM is set, the first ``__be32`` is the crc32 of all the blocks already written to the transaction. * - 0x30 - - \_\_be64 - - h\_commit\_sec + - __be64 + - h_commit_sec - The time that the transaction was committed, in seconds since the epoch. * - 0x38 - - \_\_be32 - - h\_commit\_nsec + - __be32 + - h_commit_nsec - Nanoseconds component of the above timestamp. Fast commits diff --git a/Documentation/filesystems/ext4/mmp.rst b/Documentation/filesystems/ext4/mmp.rst index 2566098..174dd65 100644 --- a/Documentation/filesystems/ext4/mmp.rst +++ b/Documentation/filesystems/ext4/mmp.rst @@ -7,8 +7,8 @@ Multiple mount protection (MMP) is a feature that protects the filesystem against multiple hosts trying to use the filesystem simultaneously. When a filesystem is opened (for mounting, or fsck, etc.), the MMP code running on the node (call it node A) checks a -sequence number. If the sequence number is EXT4\_MMP\_SEQ\_CLEAN, the -open continues. If the sequence number is EXT4\_MMP\_SEQ\_FSCK, then +sequence number. If the sequence number is EXT4_MMP_SEQ_CLEAN, the +open continues. If the sequence number is EXT4_MMP_SEQ_FSCK, then fsck is (hopefully) running, and open fails immediately. Otherwise, the open code will wait for twice the specified MMP check interval and check the sequence number again. If the sequence number has changed, then the @@ -40,38 +40,38 @@ The MMP structure (``struct mmp_struct``) is as follows: - Name - Description * - 0x0 - - \_\_le32 - - mmp\_magic + - __le32 + - mmp_magic - Magic number for MMP, 0x004D4D50 (“MMP”). * - 0x4 - - \_\_le32 - - mmp\_seq + - __le32 + - mmp_seq - Sequence number, updated periodically. * - 0x8 - - \_\_le64 - - mmp\_time + - __le64 + - mmp_time - Time that the MMP block was last updated. * - 0x10 - char[64] - - mmp\_nodename + - mmp_nodename - Hostname of the node that opened the filesystem. * - 0x50 - char[32] - - mmp\_bdevname + - mmp_bdevname - Block device name of the filesystem. * - 0x70 - - \_\_le16 - - mmp\_check\_interval + - __le16 + - mmp_check_interval - The MMP re-check interval, in seconds. * - 0x72 - - \_\_le16 - - mmp\_pad1 + - __le16 + - mmp_pad1 - Zero. * - 0x74 - - \_\_le32[226] - - mmp\_pad2 + - __le32[226] + - mmp_pad2 - Zero. * - 0x3FC - - \_\_le32 - - mmp\_checksum + - __le32 + - mmp_checksum - Checksum of the MMP block. diff --git a/Documentation/filesystems/ext4/overview.rst b/Documentation/filesystems/ext4/overview.rst index 123ebfd..0fad6ed 100644 --- a/Documentation/filesystems/ext4/overview.rst +++ b/Documentation/filesystems/ext4/overview.rst @@ -7,7 +7,7 @@ An ext4 file system is split into a series of block groups. To reduce performance difficulties due to fragmentation, the block allocator tries very hard to keep each file's blocks within the same group, thereby reducing seek times. The size of a block group is specified in -``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 \* +``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 * ``block_size_in_bytes``. With the default block size of 4KiB, each group will contain 32,768 blocks, for a length of 128MiB. The number of block groups is the size of the device divided by the size of a block group. diff --git a/Documentation/filesystems/ext4/special_inodes.rst b/Documentation/filesystems/ext4/special_inodes.rst index 94f304e..fc06369 100644 --- a/Documentation/filesystems/ext4/special_inodes.rst +++ b/Documentation/filesystems/ext4/special_inodes.rst @@ -34,7 +34,7 @@ ext4 reserves some inode for special features, as follows: * - 10 - Replica inode, used for some non-upstream feature? * - 11 - - Traditional first non-reserved inode. Usually this is the lost+found directory. See s\_first\_ino in the superblock. + - Traditional first non-reserved inode. Usually this is the lost+found directory. See s_first_ino in the superblock. Note that there are also some inodes allocated from non-reserved inode numbers for other filesystem features which are not referenced from standard directory @@ -47,9 +47,9 @@ hierarchy. These are generally reference from the superblock. They are: * - Superblock field - Description - * - s\_lpf\_ino + * - s_lpf_ino - Inode number of lost+found directory. - * - s\_prj\_quota\_inum + * - s_prj_quota_inum - Inode number of quota file tracking project quotas - * - s\_orphan\_file\_inum + * - s_orphan_file_inum - Inode number of file tracking orphan inodes. diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst index f6a548e..2688885 100644 --- a/Documentation/filesystems/ext4/super.rst +++ b/Documentation/filesystems/ext4/super.rst @@ -7,7 +7,7 @@ The superblock records various information about the enclosing filesystem, such as block counts, inode counts, supported features, maintenance information, and more. -If the sparse\_super feature flag is set, redundant copies of the +If the sparse_super feature flag is set, redundant copies of the superblock and group descriptors are kept only in the groups whose group number is either 0 or a power of 3, 5, or 7. If the flag is not set, redundant copies are kept in all groups. @@ -27,107 +27,107 @@ The ext4 superblock is laid out as follows in - Name - Description * - 0x0 - - \_\_le32 - - s\_inodes\_count + - __le32 + - s_inodes_count - Total inode count. * - 0x4 - - \_\_le32 - - s\_blocks\_count\_lo + - __le32 + - s_blocks_count_lo - Total block count. * - 0x8 - - \_\_le32 - - s\_r\_blocks\_count\_lo + - __le32 + - s_r_blocks_count_lo - This number of blocks can only be allocated by the super-user. * - 0xC - - \_\_le32 - - s\_free\_blocks\_count\_lo + - __le32 + - s_free_blocks_count_lo - Free block count. * - 0x10 - - \_\_le32 - - s\_free\_inodes\_count + - __le32 + - s_free_inodes_count - Free inode count. * - 0x14 - - \_\_le32 - - s\_first\_data\_block + - __le32 + - s_first_data_block - First data block. This must be at least 1 for 1k-block filesystems and is typically 0 for all other block sizes. * - 0x18 - - \_\_le32 - - s\_log\_block\_size - - Block size is 2 ^ (10 + s\_log\_block\_size). + - __le32 + - s_log_block_size + - Block size is 2 ^ (10 + s_log_block_size). * - 0x1C - - \_\_le32 - - s\_log\_cluster\_size - - Cluster size is 2 ^ (10 + s\_log\_cluster\_size) blocks if bigalloc is - enabled. Otherwise s\_log\_cluster\_size must equal s\_log\_block\_size. + - __le32 + - s_log_cluster_size + - Cluster size is 2 ^ (10 + s_log_cluster_size) blocks if bigalloc is + enabled. Otherwise s_log_cluster_size must equal s_log_block_size. * - 0x20 - - \_\_le32 - - s\_blocks\_per\_group + - __le32 + - s_blocks_per_group - Blocks per group. * - 0x24 - - \_\_le32 - - s\_clusters\_per\_group + - __le32 + - s_clusters_per_group - Clusters per group, if bigalloc is enabled. Otherwise - s\_clusters\_per\_group must equal s\_blocks\_per\_group. + s_clusters_per_group must equal s_blocks_per_group. * - 0x28 - - \_\_le32 - - s\_inodes\_per\_group + - __le32 + - s_inodes_per_group - Inodes per group. * - 0x2C - - \_\_le32 - - s\_mtime + - __le32 + - s_mtime - Mount time, in seconds since the epoch. * - 0x30 - - \_\_le32 - - s\_wtime + - __le32 + - s_wtime - Write time, in seconds since the epoch. * - 0x34 - - \_\_le16 - - s\_mnt\_count + - __le16 + - s_mnt_count - Number of mounts since the last fsck. * - 0x36 - - \_\_le16 - - s\_max\_mnt\_count + - __le16 + - s_max_mnt_count - Number of mounts beyond which a fsck is needed. * - 0x38 - - \_\_le16 - - s\_magic + - __le16 + - s_magic - Magic signature, 0xEF53 * - 0x3A - - \_\_le16 - - s\_state + - __le16 + - s_state - File system state. See super_state_ for more info. * - 0x3C - - \_\_le16 - - s\_errors + - __le16 + - s_errors - Behaviour when detecting errors. See super_errors_ for more info. * - 0x3E - - \_\_le16 - - s\_minor\_rev\_level + - __le16 + - s_minor_rev_level - Minor revision level. * - 0x40 - - \_\_le32 - - s\_lastcheck + - __le32 + - s_lastcheck - Time of last check, in seconds since the epoch. * - 0x44 - - \_\_le32 - - s\_checkinterval + - __le32 + - s_checkinterval - Maximum time between checks, in seconds. * - 0x48 - - \_\_le32 - - s\_creator\_os + - __le32 + - s_creator_os - Creator OS. See the table super_creator_ for more info. * - 0x4C - - \_\_le32 - - s\_rev\_level + - __le32 + - s_rev_level - Revision level. See the table super_revision_ for more info. * - 0x50 - - \_\_le16 - - s\_def\_resuid + - __le16 + - s_def_resuid - Default uid for reserved blocks. * - 0x52 - - \_\_le16 - - s\_def\_resgid + - __le16 + - s_def_resgid - Default gid for reserved blocks. * - - @@ -143,50 +143,50 @@ The ext4 superblock is laid out as follows in about a feature in either the compatible or incompatible feature set, it must abort and not try to meddle with things it doesn't understand... * - 0x54 - - \_\_le32 - - s\_first\_ino + - __le32 + - s_first_ino - First non-reserved inode. * - 0x58 - - \_\_le16 - - s\_inode\_size + - __le16 + - s_inode_size - Size of inode structure, in bytes. * - 0x5A - - \_\_le16 - - s\_block\_group\_nr + - __le16 + - s_block_group_nr - Block group # of this superblock. * - 0x5C - - \_\_le32 - - s\_feature\_compat + - __le32 + - s_feature_compat - Compatible feature set flags. Kernel can still read/write this fs even if it doesn't understand a flag; fsck should not do that. See the super_compat_ table for more info. * - 0x60 - - \_\_le32 - - s\_feature\_incompat + - __le32 + - s_feature_incompat - Incompatible feature set. If the kernel or fsck doesn't understand one of these bits, it should stop. See the super_incompat_ table for more info. * - 0x64 - - \_\_le32 - - s\_feature\_ro\_compat + - __le32 + - s_feature_ro_compat - Readonly-compatible feature set. If the kernel doesn't understand one of these bits, it can still mount read-only. See the super_rocompat_ table for more info. * - 0x68 - - \_\_u8 - - s\_uuid[16] + - __u8 + - s_uuid[16] - 128-bit UUID for volume. * - 0x78 - char - - s\_volume\_name[16] + - s_volume_name[16] - Volume label. * - 0x88 - char - - s\_last\_mounted[64] + - s_last_mounted[64] - Directory where filesystem was last mounted. * - 0xC8 - - \_\_le32 - - s\_algorithm\_usage\_bitmap + - __le32 + - s_algorithm_usage_bitmap - For compression (Not used in e2fsprogs/Linux) * - - @@ -194,18 +194,18 @@ The ext4 superblock is laid out as follows in - Performance hints. Directory preallocation should only happen if the EXT4_FEATURE_COMPAT_DIR_PREALLOC flag is on. * - 0xCC - - \_\_u8 - - s\_prealloc\_blocks + - __u8 + - s_prealloc_blocks - #. of blocks to try to preallocate for ... files? (Not used in e2fsprogs/Linux) * - 0xCD - - \_\_u8 - - s\_prealloc\_dir\_blocks + - __u8 + - s_prealloc_dir_blocks - #. of blocks to preallocate for directories. (Not used in e2fsprogs/Linux) * - 0xCE - - \_\_le16 - - s\_reserved\_gdt\_blocks + - __le16 + - s_reserved_gdt_blocks - Number of reserved GDT entries for future filesystem expansion. * - - @@ -213,281 +213,281 @@ The ext4 superblock is laid out as follows in - Journalling support is valid only if EXT4_FEATURE_COMPAT_HAS_JOURNAL is set. * - 0xD0 - - \_\_u8 - - s\_journal\_uuid[16] + - __u8 + - s_journal_uuid[16] - UUID of journal superblock * - 0xE0 - - \_\_le32 - - s\_journal\_inum + - __le32 + - s_journal_inum - inode number of journal file. * - 0xE4 - - \_\_le32 - - s\_journal\_dev + - __le32 + - s_journal_dev - Device number of journal file, if the external journal feature flag is set. * - 0xE8 - - \_\_le32 - - s\_last\_orphan + - __le32 + - s_last_orphan - Start of list of orphaned inodes to delete. * - 0xEC - - \_\_le32 - - s\_hash\_seed[4] + - __le32 + - s_hash_seed[4] - HTREE hash seed. * - 0xFC - - \_\_u8 - - s\_def\_hash\_version + - __u8 + - s_def_hash_version - Default hash algorithm to use for directory hashes. See super_def_hash_ for more info. * - 0xFD - - \_\_u8 - - s\_jnl\_backup\_type - - If this value is 0 or EXT3\_JNL\_BACKUP\_BLOCKS (1), then the + - __u8 + - s_jnl_backup_type + - If this value is 0 or EXT3_JNL_BACKUP_BLOCKS (1), then the ``s_jnl_blocks`` field contains a duplicate copy of the inode's ``i_block[]`` array and ``i_size``. * - 0xFE - - \_\_le16 - - s\_desc\_size + - __le16 + - s_desc_size - Size of group descriptors, in bytes, if the 64bit incompat feature flag is set. * - 0x100 - - \_\_le32 - - s\_default\_mount\_opts + - __le32 + - s_default_mount_opts - Default mount options. See the super_mountopts_ table for more info. * - 0x104 - - \_\_le32 - - s\_first\_meta\_bg - - First metablock block group, if the meta\_bg feature is enabled. + - __le32 + - s_first_meta_bg + - First metablock block group, if the meta_bg feature is enabled. * - 0x108 - - \_\_le32 - - s\_mkfs\_time + - __le32 + - s_mkfs_time - When the filesystem was created, in seconds since the epoch. * - 0x10C - - \_\_le32 - - s\_jnl\_blocks[17] + - __le32 + - s_jnl_blocks[17] - Backup copy of the journal inode's ``i_block[]`` array in the first 15 - elements and i\_size\_high and i\_size in the 16th and 17th elements, + elements and i_size_high and i_size in the 16th and 17th elements, respectively. * - - - - 64bit support is valid only if EXT4_FEATURE_COMPAT_64BIT is set. * - 0x150 - - \_\_le32 - - s\_blocks\_count\_hi + - __le32 + - s_blocks_count_hi - High 32-bits of the block count. * - 0x154 - - \_\_le32 - - s\_r\_blocks\_count\_hi + - __le32 + - s_r_blocks_count_hi - High 32-bits of the reserved block count. * - 0x158 - - \_\_le32 - - s\_free\_blocks\_count\_hi + - __le32 + - s_free_blocks_count_hi - High 32-bits of the free block count. * - 0x15C - - \_\_le16 - - s\_min\_extra\_isize + - __le16 + - s_min_extra_isize - All inodes have at least # bytes. * - 0x15E - - \_\_le16 - - s\_want\_extra\_isize + - __le16 + - s_want_extra_isize - New inodes should reserve # bytes. * - 0x160 - - \_\_le32 - - s\_flags + - __le32 + - s_flags - Miscellaneous flags. See the super_flags_ table for more info. * - 0x164 - - \_\_le16 - - s\_raid\_stride + - __le16 + - s_raid_stride - RAID stride. This is the number of logical blocks read from or written to the disk before moving to the next disk. This affects the placement of filesystem metadata, which will hopefully make RAID storage faster. * - 0x166 - - \_\_le16 - - s\_mmp\_interval + - __le16 + - s_mmp_interval - #. seconds to wait in multi-mount prevention (MMP) checking. In theory, MMP is a mechanism to record in the superblock which host and device have mounted the filesystem, in order to prevent multiple mounts. This feature does not seem to be implemented... * - 0x168 - - \_\_le64 - - s\_mmp\_block + - __le64 + - s_mmp_block - Block # for multi-mount protection data. * - 0x170 - - \_\_le32 - - s\_raid\_stripe\_width + - __le32 + - s_raid_stripe_width - RAID stripe width. This is the number of logical blocks read from or written to the disk before coming back to the current disk. This is used by the block allocator to try to reduce the number of read-modify-write operations in a RAID5/6. * - 0x174 - - \_\_u8 - - s\_log\_groups\_per\_flex + - __u8 + - s_log_groups_per_flex - Size of a flexible block group is 2 ^ ``s_log_groups_per_flex``. * - 0x175 - - \_\_u8 - - s\_checksum\_type + - __u8 + - s_checksum_type - Metadata checksum algorithm type. The only valid value is 1 (crc32c). * - 0x176 - - \_\_le16 - - s\_reserved\_pad + - __le16 + - s_reserved_pad - * - 0x178 - - \_\_le64 - - s\_kbytes\_written + - __le64 + - s_kbytes_written - Number of KiB written to this filesystem over its lifetime. * - 0x180 - - \_\_le32 - - s\_snapshot\_inum + - __le32 + - s_snapshot_inum - inode number of active snapshot. (Not used in e2fsprogs/Linux.) * - 0x184 - - \_\_le32 - - s\_snapshot\_id + - __le32 + - s_snapshot_id - Sequential ID of active snapshot. (Not used in e2fsprogs/Linux.) * - 0x188 - - \_\_le64 - - s\_snapshot\_r\_blocks\_count + - __le64 + - s_snapshot_r_blocks_count - Number of blocks reserved for active snapshot's future use. (Not used in e2fsprogs/Linux.) * - 0x190 - - \_\_le32 - - s\_snapshot\_list + - __le32 + - s_snapshot_list - inode number of the head of the on-disk snapshot list. (Not used in e2fsprogs/Linux.) * - 0x194 - - \_\_le32 - - s\_error\_count + - __le32 + - s_error_count - Number of errors seen. * - 0x198 - - \_\_le32 - - s\_first\_error\_time + - __le32 + - s_first_error_time - First time an error happened, in seconds since the epoch. * - 0x19C - - \_\_le32 - - s\_first\_error\_ino + - __le32 + - s_first_error_ino - inode involved in first error. * - 0x1A0 - - \_\_le64 - - s\_first\_error\_block + - __le64 + - s_first_error_block - Number of block involved of first error. * - 0x1A8 - - \_\_u8 - - s\_first\_error\_func[32] + - __u8 + - s_first_error_func[32] - Name of function where the error happened. * - 0x1C8 - - \_\_le32 - - s\_first\_error\_line + - __le32 + - s_first_error_line - Line number where error happened. * - 0x1CC - - \_\_le32 - - s\_last\_error\_time + - __le32 + - s_last_error_time - Time of most recent error, in seconds since the epoch. * - 0x1D0 - - \_\_le32 - - s\_last\_error\_ino + - __le32 + - s_last_error_ino - inode involved in most recent error. * - 0x1D4 - - \_\_le32 - - s\_last\_error\_line + - __le32 + - s_last_error_line - Line number where most recent error happened. * - 0x1D8 - - \_\_le64 - - s\_last\_error\_block + - __le64 + - s_last_error_block - Number of block involved in most recent error. * - 0x1E0 - - \_\_u8 - - s\_last\_error\_func[32] + - __u8 + - s_last_error_func[32] - Name of function where the most recent error happened. * - 0x200 - - \_\_u8 - - s\_mount\_opts[64] + - __u8 + - s_mount_opts[64] - ASCIIZ string of mount options. * - 0x240 - - \_\_le32 - - s\_usr\_quota\_inum + - __le32 + - s_usr_quota_inum - Inode number of user `quota `__ file. * - 0x244 - - \_\_le32 - - s\_grp\_quota\_inum + - __le32 + - s_grp_quota_inum - Inode number of group `quota `__ file. * - 0x248 - - \_\_le32 - - s\_overhead\_blocks + - __le32 + - s_overhead_blocks - Overhead blocks/clusters in fs. (Huh? This field is always zero, which means that the kernel calculates it dynamically.) * - 0x24C - - \_\_le32 - - s\_backup\_bgs[2] - - Block groups containing superblock backups (if sparse\_super2) + - __le32 + - s_backup_bgs[2] + - Block groups containing superblock backups (if sparse_super2) * - 0x254 - - \_\_u8 - - s\_encrypt\_algos[4] + - __u8 + - s_encrypt_algos[4] - Encryption algorithms in use. There can be up to four algorithms in use at any time; valid algorithm codes are given in the super_encrypt_ table below. * - 0x258 - - \_\_u8 - - s\_encrypt\_pw\_salt[16] + - __u8 + - s_encrypt_pw_salt[16] - Salt for the string2key algorithm for encryption. * - 0x268 - - \_\_le32 - - s\_lpf\_ino + - __le32 + - s_lpf_ino - Inode number of lost+found * - 0x26C - - \_\_le32 - - s\_prj\_quota\_inum + - __le32 + - s_prj_quota_inum - Inode that tracks project quotas. * - 0x270 - - \_\_le32 - - s\_checksum\_seed - - Checksum seed used for metadata\_csum calculations. This value is - crc32c(~0, $orig\_fs\_uuid). + - __le32 + - s_checksum_seed + - Checksum seed used for metadata_csum calculations. This value is + crc32c(~0, $orig_fs_uuid). * - 0x274 - - \_\_u8 - - s\_wtime_hi + - __u8 + - s_wtime_hi - Upper 8 bits of the s_wtime field. * - 0x275 - - \_\_u8 - - s\_mtime_hi + - __u8 + - s_mtime_hi - Upper 8 bits of the s_mtime field. * - 0x276 - - \_\_u8 - - s\_mkfs_time_hi + - __u8 + - s_mkfs_time_hi - Upper 8 bits of the s_mkfs_time field. * - 0x277 - - \_\_u8 - - s\_lastcheck_hi + - __u8 + - s_lastcheck_hi - Upper 8 bits of the s_lastcheck_hi field. * - 0x278 - - \_\_u8 - - s\_first_error_time_hi + - __u8 + - s_first_error_time_hi - Upper 8 bits of the s_first_error_time_hi field. * - 0x279 - - \_\_u8 - - s\_last_error_time_hi + - __u8 + - s_last_error_time_hi - Upper 8 bits of the s_last_error_time_hi field. * - 0x27A - - \_\_u8 - - s\_pad[2] + - __u8 + - s_pad[2] - Zero padding. * - 0x27C - - \_\_le16 - - s\_encoding + - __le16 + - s_encoding - Filename charset encoding. * - 0x27E - - \_\_le16 - - s\_encoding_flags + - __le16 + - s_encoding_flags - Filename charset encoding flags. * - 0x280 - - \_\_le32 - - s\_orphan\_file\_inum + - __le32 + - s_orphan_file_inum - Orphan file inode number. * - 0x284 - - \_\_le32 - - s\_reserved[94] + - __le32 + - s_reserved[94] - Padding to the end of the block. * - 0x3FC - - \_\_le32 - - s\_checksum + - __le32 + - s_checksum - Superblock checksum. .. _super_state: @@ -574,44 +574,44 @@ following: * - Value - Description * - 0x1 - - Directory preallocation (COMPAT\_DIR\_PREALLOC). + - Directory preallocation (COMPAT_DIR_PREALLOC). * - 0x2 - “imagic inodes”. Not clear from the code what this does - (COMPAT\_IMAGIC\_INODES). + (COMPAT_IMAGIC_INODES). * - 0x4 - - Has a journal (COMPAT\_HAS\_JOURNAL). + - Has a journal (COMPAT_HAS_JOURNAL). * - 0x8 - - Supports extended attributes (COMPAT\_EXT\_ATTR). + - Supports extended attributes (COMPAT_EXT_ATTR). * - 0x10 - Has reserved GDT blocks for filesystem expansion - (COMPAT\_RESIZE\_INODE). Requires RO\_COMPAT\_SPARSE\_SUPER. + (COMPAT_RESIZE_INODE). Requires RO_COMPAT_SPARSE_SUPER. * - 0x20 - - Has directory indices (COMPAT\_DIR\_INDEX). + - Has directory indices (COMPAT_DIR_INDEX). * - 0x40 - “Lazy BG”. Not in Linux kernel, seems to have been for uninitialized - block groups? (COMPAT\_LAZY\_BG) + block groups? (COMPAT_LAZY_BG) * - 0x80 - - “Exclude inode”. Not used. (COMPAT\_EXCLUDE\_INODE). + - “Exclude inode”. Not used. (COMPAT_EXCLUDE_INODE). * - 0x100 - “Exclude bitmap”. Seems to be used to indicate the presence of snapshot-related exclude bitmaps? Not defined in kernel or used in - e2fsprogs (COMPAT\_EXCLUDE\_BITMAP). + e2fsprogs (COMPAT_EXCLUDE_BITMAP). * - 0x200 - - Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs + - Sparse Super Block, v2. If this flag is set, the SB field s_backup_bgs points to the two block groups that contain backup superblocks - (COMPAT\_SPARSE\_SUPER2). + (COMPAT_SPARSE_SUPER2). * - 0x400 - Fast commits supported. Although fast commits blocks are backward incompatible, fast commit blocks are not always present in the journal. If fast commit blocks are present in the journal, JBD2 incompat feature - (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets - set (COMPAT\_FAST\_COMMIT). + (JBD2_FEATURE_INCOMPAT_FAST_COMMIT) gets + set (COMPAT_FAST_COMMIT). * - 0x1000 - Orphan file allocated. This is the special file for more efficient tracking of unlinked but still open inodes. When there may be any entries in the file, we additionally set proper rocompat feature - (RO\_COMPAT\_ORPHAN\_PRESENT). + (RO_COMPAT_ORPHAN_PRESENT). .. _super_incompat: @@ -625,45 +625,45 @@ following: * - Value - Description * - 0x1 - - Compression (INCOMPAT\_COMPRESSION). + - Compression (INCOMPAT_COMPRESSION). * - 0x2 - - Directory entries record the file type. See ext4\_dir\_entry\_2 below - (INCOMPAT\_FILETYPE). + - Directory entries record the file type. See ext4_dir_entry_2 below + (INCOMPAT_FILETYPE). * - 0x4 - - Filesystem needs recovery (INCOMPAT\_RECOVER). + - Filesystem needs recovery (INCOMPAT_RECOVER). * - 0x8 - - Filesystem has a separate journal device (INCOMPAT\_JOURNAL\_DEV). + - Filesystem has a separate journal device (INCOMPAT_JOURNAL_DEV). * - 0x10 - Meta block groups. See the earlier discussion of this feature - (INCOMPAT\_META\_BG). + (INCOMPAT_META_BG). * - 0x40 - - Files in this filesystem use extents (INCOMPAT\_EXTENTS). + - Files in this filesystem use extents (INCOMPAT_EXTENTS). * - 0x80 - - Enable a filesystem size of 2^64 blocks (INCOMPAT\_64BIT). + - Enable a filesystem size of 2^64 blocks (INCOMPAT_64BIT). * - 0x100 - - Multiple mount protection (INCOMPAT\_MMP). + - Multiple mount protection (INCOMPAT_MMP). * - 0x200 - Flexible block groups. See the earlier discussion of this feature - (INCOMPAT\_FLEX\_BG). + (INCOMPAT_FLEX_BG). * - 0x400 - Inodes can be used to store large extended attribute values - (INCOMPAT\_EA\_INODE). + (INCOMPAT_EA_INODE). * - 0x1000 - - Data in directory entry (INCOMPAT\_DIRDATA). (Not implemented?) + - Data in directory entry (INCOMPAT_DIRDATA). (Not implemented?) * - 0x2000 - Metadata checksum seed is stored in the superblock. This feature enables - the administrator to change the UUID of a metadata\_csum filesystem + the administrator to change the UUID of a metadata_csum filesystem while the filesystem is mounted; without it, the checksum definition - requires all metadata blocks to be rewritten (INCOMPAT\_CSUM\_SEED). + requires all metadata blocks to be rewritten (INCOMPAT_CSUM_SEED). * - 0x4000 - - Large directory >2GB or 3-level htree (INCOMPAT\_LARGEDIR). Prior to + - Large directory >2GB or 3-level htree (INCOMPAT_LARGEDIR). Prior to this feature, directories could not be larger than 4GiB and could not have an htree more than 2 levels deep. If this feature is enabled, directories can be larger than 4GiB and have a maximum htree depth of 3. * - 0x8000 - - Data in inode (INCOMPAT\_INLINE\_DATA). + - Data in inode (INCOMPAT_INLINE_DATA). * - 0x10000 - - Encrypted inodes are present on the filesystem. (INCOMPAT\_ENCRYPT). + - Encrypted inodes are present on the filesystem. (INCOMPAT_ENCRYPT). .. _super_rocompat: @@ -678,54 +678,54 @@ the following: - Description * - 0x1 - Sparse superblocks. See the earlier discussion of this feature - (RO\_COMPAT\_SPARSE\_SUPER). + (RO_COMPAT_SPARSE_SUPER). * - 0x2 - This filesystem has been used to store a file greater than 2GiB - (RO\_COMPAT\_LARGE\_FILE). + (RO_COMPAT_LARGE_FILE). * - 0x4 - - Not used in kernel or e2fsprogs (RO\_COMPAT\_BTREE\_DIR). + - Not used in kernel or e2fsprogs (RO_COMPAT_BTREE_DIR). * - 0x8 - This filesystem has files whose sizes are represented in units of logical blocks, not 512-byte sectors. This implies a very large file - indeed! (RO\_COMPAT\_HUGE\_FILE) + indeed! (RO_COMPAT_HUGE_FILE) * - 0x10 - Group descriptors have checksums. In addition to detecting corruption, this is useful for lazy formatting with uninitialized groups - (RO\_COMPAT\_GDT\_CSUM). + (RO_COMPAT_GDT_CSUM). * - 0x20 - Indicates that the old ext3 32,000 subdirectory limit no longer applies - (RO\_COMPAT\_DIR\_NLINK). A directory's i\_links\_count will be set to 1 + (RO_COMPAT_DIR_NLINK). A directory's i_links_count will be set to 1 if it is incremented past 64,999. * - 0x40 - Indicates that large inodes exist on this filesystem - (RO\_COMPAT\_EXTRA\_ISIZE). + (RO_COMPAT_EXTRA_ISIZE). * - 0x80 - - This filesystem has a snapshot (RO\_COMPAT\_HAS\_SNAPSHOT). + - This filesystem has a snapshot (RO_COMPAT_HAS_SNAPSHOT). * - 0x100 - - `Quota `__ (RO\_COMPAT\_QUOTA). + - `Quota `__ (RO_COMPAT_QUOTA). * - 0x200 - This filesystem supports “bigalloc”, which means that file extents are tracked in units of clusters (of blocks) instead of blocks - (RO\_COMPAT\_BIGALLOC). + (RO_COMPAT_BIGALLOC). * - 0x400 - This filesystem supports metadata checksumming. - (RO\_COMPAT\_METADATA\_CSUM; implies RO\_COMPAT\_GDT\_CSUM, though - GDT\_CSUM must not be set) + (RO_COMPAT_METADATA_CSUM; implies RO_COMPAT_GDT_CSUM, though + GDT_CSUM must not be set) * - 0x800 - Filesystem supports replicas. This feature is neither in the kernel nor - e2fsprogs. (RO\_COMPAT\_REPLICA) + e2fsprogs. (RO_COMPAT_REPLICA) * - 0x1000 - Read-only filesystem image; the kernel will not mount this image read-write and most tools will refuse to write to the image. - (RO\_COMPAT\_READONLY) + (RO_COMPAT_READONLY) * - 0x2000 - - Filesystem tracks project quotas. (RO\_COMPAT\_PROJECT) + - Filesystem tracks project quotas. (RO_COMPAT_PROJECT) * - 0x8000 - - Verity inodes may be present on the filesystem. (RO\_COMPAT\_VERITY) + - Verity inodes may be present on the filesystem. (RO_COMPAT_VERITY) * - 0x10000 - Indicates orphan file may have valid orphan entries and thus we need to clean them up when mounting the filesystem - (RO\_COMPAT\_ORPHAN\_PRESENT). + (RO_COMPAT_ORPHAN_PRESENT). .. _super_def_hash: @@ -761,36 +761,36 @@ The ``s_default_mount_opts`` field is any combination of the following: * - Value - Description * - 0x0001 - - Print debugging info upon (re)mount. (EXT4\_DEFM\_DEBUG) + - Print debugging info upon (re)mount. (EXT4_DEFM_DEBUG) * - 0x0002 - New files take the gid of the containing directory (instead of the fsgid - of the current process). (EXT4\_DEFM\_BSDGROUPS) + of the current process). (EXT4_DEFM_BSDGROUPS) * - 0x0004 - - Support userspace-provided extended attributes. (EXT4\_DEFM\_XATTR\_USER) + - Support userspace-provided extended attributes. (EXT4_DEFM_XATTR_USER) * - 0x0008 - - Support POSIX access control lists (ACLs). (EXT4\_DEFM\_ACL) + - Support POSIX access control lists (ACLs). (EXT4_DEFM_ACL) * - 0x0010 - - Do not support 32-bit UIDs. (EXT4\_DEFM\_UID16) + - Do not support 32-bit UIDs. (EXT4_DEFM_UID16) * - 0x0020 - All data and metadata are commited to the journal. - (EXT4\_DEFM\_JMODE\_DATA) + (EXT4_DEFM_JMODE_DATA) * - 0x0040 - All data are flushed to the disk before metadata are committed to the - journal. (EXT4\_DEFM\_JMODE\_ORDERED) + journal. (EXT4_DEFM_JMODE_ORDERED) * - 0x0060 - Data ordering is not preserved; data may be written after the metadata - has been written. (EXT4\_DEFM\_JMODE\_WBACK) + has been written. (EXT4_DEFM_JMODE_WBACK) * - 0x0100 - - Disable write flushes. (EXT4\_DEFM\_NOBARRIER) + - Disable write flushes. (EXT4_DEFM_NOBARRIER) * - 0x0200 - Track which blocks in a filesystem are metadata and therefore should not be used as data blocks. This option will be enabled by default on 3.18, - hopefully. (EXT4\_DEFM\_BLOCK\_VALIDITY) + hopefully. (EXT4_DEFM_BLOCK_VALIDITY) * - 0x0400 - Enable DISCARD support, where the storage device is told about blocks - becoming unused. (EXT4\_DEFM\_DISCARD) + becoming unused. (EXT4_DEFM_DISCARD) * - 0x0800 - - Disable delayed allocation. (EXT4\_DEFM\_NODELALLOC) + - Disable delayed allocation. (EXT4_DEFM_NODELALLOC) .. _super_flags: @@ -820,12 +820,12 @@ The ``s_encrypt_algos`` list can contain any of the following: * - Value - Description * - 0 - - Invalid algorithm (ENCRYPTION\_MODE\_INVALID). + - Invalid algorithm (ENCRYPTION_MODE_INVALID). * - 1 - - 256-bit AES in XTS mode (ENCRYPTION\_MODE\_AES\_256\_XTS). + - 256-bit AES in XTS mode (ENCRYPTION_MODE_AES_256_XTS). * - 2 - - 256-bit AES in GCM mode (ENCRYPTION\_MODE\_AES\_256\_GCM). + - 256-bit AES in GCM mode (ENCRYPTION_MODE_AES_256_GCM). * - 3 - - 256-bit AES in CBC mode (ENCRYPTION\_MODE\_AES\_256\_CBC). + - 256-bit AES in CBC mode (ENCRYPTION_MODE_AES_256_CBC). Total size of the superblock is 1024 bytes. diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst index a80a599..73a4176 100644 --- a/Documentation/filesystems/netfs_library.rst +++ b/Documentation/filesystems/netfs_library.rst @@ -37,30 +37,31 @@ The network filesystem helper library needs a place to store a bit of state for its use on each netfs inode it is helping to manage. To this end, a context structure is defined:: - struct netfs_i_context { + struct netfs_inode { + struct inode inode; const struct netfs_request_ops *ops; - struct fscache_cookie *cache; + struct fscache_cookie *cache; }; -A network filesystem that wants to use netfs lib must place one of these -directly after the VFS ``struct inode`` it allocates, usually as part of its -own struct. This can be done in a way similar to the following:: +A network filesystem that wants to use netfs lib must place one of these in its +inode wrapper struct instead of the VFS ``struct inode``. This can be done in +a way similar to the following:: struct my_inode { - struct { - /* These must be contiguous */ - struct inode vfs_inode; - struct netfs_i_context netfs_ctx; - }; + struct netfs_inode netfs; /* Netfslib context and vfs inode */ ... }; -This allows netfslib to find its state by simple offset from the inode pointer, -thereby allowing the netfslib helper functions to be pointed to directly by the -VFS/VM operation tables. +This allows netfslib to find its state by using ``container_of()`` from the +inode pointer, thereby allowing the netfslib helper functions to be pointed to +directly by the VFS/VM operation tables. The structure contains the following fields: + * ``inode`` + + The VFS inode structure. + * ``ops`` The set of operations provided by the network filesystem to netfslib. @@ -78,19 +79,17 @@ To help deal with the per-inode context, a number helper functions are provided. Firstly, a function to perform basic initialisation on a context and set the operations table pointer:: - void netfs_i_context_init(struct inode *inode, - const struct netfs_request_ops *ops); + void netfs_inode_init(struct netfs_inode *ctx, + const struct netfs_request_ops *ops); -then two functions to cast between the VFS inode structure and the netfs -context:: +then a function to cast from the VFS inode structure to the netfs context:: - struct netfs_i_context *netfs_i_context(struct inode *inode); - struct inode *netfs_inode(struct netfs_i_context *ctx); + struct netfs_inode *netfs_node(struct inode *inode); and finally, a function to get the cache cookie pointer from the context attached to an inode (or NULL if fscache is disabled):: - struct fscache_cookie *netfs_i_cookie(struct inode *inode); + struct fscache_cookie *netfs_i_cookie(struct netfs_inode *ctx); Buffered Read Helpers @@ -137,8 +136,9 @@ Three read helpers are provided:: void netfs_readahead(struct readahead_control *ractl); int netfs_read_folio(struct file *file, - struct folio *folio); - int netfs_write_begin(struct file *file, + struct folio *folio); + int netfs_write_begin(struct netfs_inode *ctx, + struct file *file, struct address_space *mapping, loff_t pos, unsigned int len, @@ -158,9 +158,10 @@ The helpers manage the read request, calling back into the network filesystem through the suppplied table of operations. Waits will be performed as necessary before returning for helpers that are meant to be synchronous. -If an error occurs and netfs_priv is non-NULL, ops->cleanup() will be called to -deal with it. If some parts of the request are in progress when an error -occurs, the request will get partially completed if sufficient data is read. +If an error occurs, the ->free_request() will be called to clean up the +netfs_io_request struct allocated. If some parts of the request are in +progress when an error occurs, the request will get partially completed if +sufficient data is read. Additionally, there is:: @@ -208,8 +209,7 @@ The above fields are the ones the netfs can use. They are: * ``netfs_priv`` The network filesystem's private data. The value for this can be passed in - to the helper functions or set during the request. The ->cleanup() op will - be called if this is non-NULL at the end. + to the helper functions or set during the request. * ``start`` * ``len`` @@ -294,15 +294,15 @@ through which it can issue requests and negotiate:: struct netfs_request_ops { void (*init_request)(struct netfs_io_request *rreq, struct file *file); + void (*free_request)(struct netfs_io_request *rreq); int (*begin_cache_operation)(struct netfs_io_request *rreq); void (*expand_readahead)(struct netfs_io_request *rreq); bool (*clamp_length)(struct netfs_io_subrequest *subreq); void (*issue_read)(struct netfs_io_subrequest *subreq); bool (*is_still_valid)(struct netfs_io_request *rreq); int (*check_write_begin)(struct file *file, loff_t pos, unsigned len, - struct folio *folio, void **_fsdata); + struct folio **foliop, void **_fsdata); void (*done)(struct netfs_io_request *rreq); - void (*cleanup)(struct address_space *mapping, void *netfs_priv); }; The operations are as follows: @@ -310,7 +310,12 @@ The operations are as follows: * ``init_request()`` [Optional] This is called to initialise the request structure. It is given - the file for reference and can modify the ->netfs_priv value. + the file for reference. + + * ``free_request()`` + + [Optional] This is called as the request is being deallocated so that the + filesystem can clean up any state it has attached there. * ``begin_cache_operation()`` @@ -376,19 +381,16 @@ The operations are as follows: allocated/grabbed the folio to be modified to allow the filesystem to flush conflicting state before allowing it to be modified. - It should return 0 if everything is now fine, -EAGAIN if the folio should be - regrabbed and any other error code to abort the operation. + It may unlock and discard the folio it was given and set the caller's folio + pointer to NULL. It should return 0 if everything is now fine (``*foliop`` + left set) or the op should be retried (``*foliop`` cleared) and any other + error code to abort the operation. * ``done`` [Optional] This is called after the folios in the request have all been unlocked (and marked uptodate if applicable). - * ``cleanup`` - - [Optional] This is called as the request is being deallocated so that the - filesystem can clean up ->netfs_priv. - Read Helper Procedure diff --git a/Documentation/firmware-guide/acpi/DSD-properties-rules.rst b/Documentation/firmware-guide/acpi/DSD-properties-rules.rst index 8b2d8d0..70442bc 100644 --- a/Documentation/firmware-guide/acpi/DSD-properties-rules.rst +++ b/Documentation/firmware-guide/acpi/DSD-properties-rules.rst @@ -21,7 +21,9 @@ specific type) associated with it. In the ACPI _DSD context it is an element of the sub-package following the generic Device Properties UUID in the _DSD return package as specified in the -Device Properties UUID definition document [1]_. +section titled "Well-Known _DSD UUIDs and Data Structure Formats" sub-section +"Device Properties UUID" in _DSD (Device Specific Data) Implementation Guide +document [1]_. It also may be regarded as the definition of a key and the associated data type that can be returned by _DSD in the Device Properties UUID sub-package for a @@ -36,7 +38,9 @@ Property subsets are nested collections of properties. Each of them is associated with an additional key (name) allowing the subset to be referred to as a whole (and to be treated as a separate entity). The canonical representation of property subsets is via the mechanism specified in the -Hierarchical Properties Extension UUID definition document [2]_. +section titled "Well-Known _DSD UUIDs and Data Structure Formats" sub-section +"Hierarchical Data Extension UUID" in _DSD (Device Specific Data) +Implementation Guide document [1]_. Property sets may be hierarchical. That is, a property set may contain multiple property subsets that each may contain property subsets of its @@ -96,5 +100,4 @@ contents. References ========== -.. [1] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf -.. [2] https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf +.. [1] https://github.com/UEFI/DSD-Guide diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index 55e2331..d6b61d2 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -168,7 +168,7 @@ An error injection example:: 0x00000008 Memory Correctable 0x00000010 Memory Uncorrectable non-fatal # echo 0x12345000 > param1 # Set memory address for injection - # echo $((-1 << 12)) > param2 # Mask 0xfffffffffffff000 - anywhere in this page + # echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page # echo 0x8 > error_type # Choose correctable memory error # echo 1 > error_inject # Inject now diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index 717e282..33649a1 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -9,6 +9,7 @@ Supported devices: * Aquacomputer Farbwerk RGB controller * Aquacomputer Farbwerk 360 RGB controller * Aquacomputer Octo fan controller +* Aquacomputer Quadro fan controller Author: Aleksa Savic @@ -33,6 +34,9 @@ better suited for userspace tools. The Octo exposes four temperature sensors and eight PWM controllable fans, along with their speed (in RPM), power, voltage and current. +The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable +fans, along with their speed (in RPM), power, voltage and current. + The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device, not all sysfs and debugfs entries will be available. @@ -45,13 +49,14 @@ the kernel and supports hotswapping. Sysfs entries ------------- -================ ============================================= +================ ============================================== temp[1-4]_input Temperature sensors (in millidegrees Celsius) -fan[1-2]_input Pump/fan speed (in RPM) -power[1-2]_input Pump/fan power (in micro Watts) -in[0-2]_input Pump/fan voltage (in milli Volts) -curr[1-2]_input Pump/fan current (in milli Amperes) -================ ============================================= +fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h) +power[1-8]_input Pump/fan power (in micro Watts) +in[0-7]_input Pump/fan voltage (in milli Volts) +curr[1-8]_input Pump/fan current (in milli Amperes) +pwm[1-8] Fan PWM (0 - 255) +================ ============================================== Debugfs entries --------------- diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst index 78ca69e..02f4ad3 100644 --- a/Documentation/hwmon/asus_ec_sensors.rst +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -13,12 +13,16 @@ Supported boards: * ROG CROSSHAIR VIII FORMULA * ROG CROSSHAIR VIII HERO * ROG CROSSHAIR VIII IMPACT + * ROG MAXIMUS XI HERO + * ROG MAXIMUS XI HERO (WI-FI) * ROG STRIX B550-E GAMING * ROG STRIX B550-I GAMING * ROG STRIX X570-E GAMING * ROG STRIX X570-E GAMING WIFI II * ROG STRIX X570-F GAMING * ROG STRIX X570-I GAMING + * ROG STRIX Z690-A GAMING WIFI D4 + * ROG ZENITH II EXTREME Authors: - Eugene Shalygin diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst index e5d85e4..d8f1d68 100644 --- a/Documentation/hwmon/dell-smm-hwmon.rst +++ b/Documentation/hwmon/dell-smm-hwmon.rst @@ -46,6 +46,9 @@ temp[1-10]_input RO Temperature reading in milli-degrees temp[1-10]_label RO Temperature sensor label. =============================== ======= ======================================= +Due to the nature of the SMM interface, each pwmX attribute controls +fan number X. + Disabling automatic BIOS fan control ------------------------------------ diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index a72c168..f7113b0f 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -109,6 +109,7 @@ Hardware Monitoring Kernel Drivers lm95234 lm95245 lochnagar + lt7182s ltc2992 ltc2945 ltc2947 diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst index 05391fb..23af17a 100644 --- a/Documentation/hwmon/lm90.rst +++ b/Documentation/hwmon/lm90.rst @@ -3,6 +3,14 @@ Kernel driver lm90 Supported chips: + * National Semiconductor LM84 + + Prefix: 'lm84' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the National Semiconductor website + * National Semiconductor LM90 Prefix: 'lm90' @@ -43,6 +51,30 @@ Supported chips: http://www.national.com/mpf/LM/LM86.html + * Analog Devices ADM1020 + + Prefix: 'adm1020' + + Addresses scanned: I2C 0x4c - 0x4e + + Datasheet: Publicly available at the Analog Devices website + + * Analog Devices ADM1021 + + Prefix: 'adm1021' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the Analog Devices website + + * Analog Devices ADM1021A/ADM1023 + + Prefix: 'adm1023' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the Analog Devices website + * Analog Devices ADM1032 Prefix: 'adm1032' @@ -73,6 +105,36 @@ Supported chips: https://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A + * Analog Devices ADT7481 + + Prefix: 'adt7481' + + Addresses scanned: I2C 0x4b and 0x4c + + Datasheet: Publicly available at the ON Semiconductor website + + https://www.onsemi.com/PowerSolutions/product.do?id=ADT7481 + + * Analog Devices ADT7482 + + Prefix: 'adt7482' + + Addresses scanned: I2C 0x4c + + Datasheet: Publicly available at the ON Semiconductor website + + https://www.onsemi.com/PowerSolutions/product.do?id=ADT7482 + + * Analog Devices ADT7483A + + Prefix: 'adt7483a' + + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e + + Datasheet: Publicly available at the ON Semiconductor website + + https://www.onsemi.com/PowerSolutions/product.do?id=ADT7483A + * ON Semiconductor NCT1008 Prefix: 'nct1008' @@ -83,6 +145,72 @@ Supported chips: https://www.onsemi.com/PowerSolutions/product.do?id=NCT1008 + * ON Semiconductor NCT210 + + Prefix: 'adm1021' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the ON Semiconductor website + + https://www.onsemi.com/PowerSolutions/product.do?id=NCT210 + + * ON Semiconductor NCT214 + + Prefix: 'nct214' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the ON Semiconductor website + + https://www.onsemi.com/PowerSolutions/product.do?id=NCT214 + + * ON Semiconductor NCT218 + + Prefix: 'nct218' + + Addresses scanned: I2C 0x4c - 0x4d + + Datasheet: Publicly available at the ON Semiconductor website + + https://www.onsemi.com/PowerSolutions/product.do?id=NCT218 + + * ON Semiconductor NCT72 + + Prefix: 'nct72' + + Addresses scanned: I2C 0x4c - 0x4d + + Datasheet: Publicly available at the ON Semiconductor website + + https://www.onsemi.com/PowerSolutions/product.do?id=NCT72 + + * Maxim MAX1617 + + Prefix: 'max1617' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the Maxim website + + * Maxim MAX1617A + + Prefix: 'max1617a' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the Maxim website + + * Maxim MAX6642 + + Prefix: 'max6642' + + Addresses scanned: I2C 0x48-0x4f + + Datasheet: Publicly available at the Maxim website + + http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf + * Maxim MAX6646 Prefix: 'max6646' @@ -105,7 +233,7 @@ Supported chips: * Maxim MAX6648 - Prefix: 'max6646' + Prefix: 'max6648' Addresses scanned: I2C 0x4c @@ -191,7 +319,7 @@ Supported chips: * Maxim MAX6692 - Prefix: 'max6646' + Prefix: 'max6648' Addresses scanned: I2C 0x4c @@ -275,6 +403,46 @@ Supported chips: https://www.ti.com/lit/gpn/tmp461 + * Philips NE1617, NE1617A + + Prefix: 'max1617' (probably detected as a max1617) + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheets: Publicly available at the Philips website + + * Philips NE1618 + + Prefix: 'ne1618' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheets: Publicly available at the Philips website + + * Genesys Logic GL523SM + + Prefix: 'gl523sm' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: + + * TI THMC10 + + Prefix: 'thmc10' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the TI website + + * Onsemi MC1066 + + Prefix: 'mc1066' + + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + + Datasheet: Publicly available at the Onsemi website + Author: Jean Delvare @@ -285,6 +453,12 @@ The LM90 is a digital temperature sensor. It senses its own temperature as well as the temperature of up to one external diode. It is compatible with many other devices, many of which are supported by this driver. +The family of chips supported by this driver is derived from MAX1617. +This chip as well as various compatible chips support a local and a remote +temperature sensor with 8 bit accuracy. Later chips provide improved accuracy +and other additional features such as hysteresis and temperature offset +registers. + Note that there is no easy way to differentiate between the MAX6657, MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only supported by this driver if the chip is located at address 0x4d or 0x4e, @@ -292,15 +466,31 @@ or if the chip type is explicitly selected as max6659. The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously can't (and don't need to) be distinguished. -The specificity of this family of chipsets over the ADM1021/LM84 -family is that it features critical limits with hysteresis, and an -increased resolution of the remote temperature measurement. - The different chipsets of the family are not strictly identical, although very similar. For reference, here comes a non-exhaustive list of specific features: +LM84: + * 8 bit sensor resolution + +ADM1020, ADM1021, GL523SM, MAX1617, NE1617, NE1617A, THMC10: + * 8 bit sensor resolution + * Low temperature limits + +NCT210, NE1618: + * 11 bit sensor resolution for remote temperature sensor + * Low temperature limits + +ADM1021A, ADM1023: + * Temperature offset register for remote temperature sensor + * 11 bit resolution for remote temperature sensor + * Low temperature limits + LM90: + * 11 bit resolution for remote temperature sensor + * Temperature offset register for remote temperature sensor + * Low and critical temperature limits + * Configurable conversion rate * Filter and alert configuration register at 0xBF. * ALERT is triggered by temperatures over critical limits. @@ -322,8 +512,31 @@ ADM1032: ADT7461, ADT7461A, NCT1008: * Extended temperature range (breaks compatibility) * Lower resolution for remote temperature + * SMBus PEC support for Write Byte and Receive Byte transactions. + * 10 bit temperature resolution + +ADT7481, ADT7482, ADT7483: + * Temperature offset register + * SMBus PEC support + * 10 bit temperature resolution for external sensors + * Two remote sensors + * Selectable address (ADT7483) + +MAX6642: + * No critical limit register + * Conversion rate not configurable + * Better local resolution (10 bit) + * 10 bit external sensor resolution + +MAX6646, MAX6647, MAX6649: + * Better local resolution + * Extended range unsigned external temperature + +MAX6648, MAX6692: + * Better local resolution + * Unsigned temperature -MAX6654: +MAX6654, MAX6690: * Better local resolution * Selectable address * Remote sensor type selection @@ -423,6 +636,6 @@ two transactions will typically mean twice as much delay waiting for transaction completion, effectively doubling the register cache refresh time. I guess reliability comes at a price, but it's quite expensive this time. -So, as not everyone might enjoy the slowdown, PEC can be disabled through -sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1 -to that file to enable PEC again. +So, as not everyone might enjoy the slowdown, PEC is disabled by default and +can be enabled through sysfs. Just write 1 to the "pec" file and PEC will be +enabled. Write 0 to that file to disable PEC again. diff --git a/Documentation/hwmon/lt7182s.rst b/Documentation/hwmon/lt7182s.rst new file mode 100644 index 0000000..f726831 --- /dev/null +++ b/Documentation/hwmon/lt7182s.rst @@ -0,0 +1,92 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver lt7182s +===================== + +Supported chips: + + * ADI LT7182S + + Prefix: 'lt7182s' + + Addresses scanned: - + + Datasheet: https://www.analog.com/en/products/lt7182s.html + +Author: Guenter Roeck + + +Description +----------- + +LT7182S is a Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher with +Digital Power System Management support. + + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +Example: the following commands will load the driver for a LT7182S +at address 0x4f on I2C bus #4:: + + # modprobe lt7182s + # echo lt7182s 0x4f > /sys/bus/i2c/devices/i2c-4/new_device + +It can also be instantiated by declaring an entry in device tree. + + +Sysfs attributes +---------------- + +======================= ==================================== +curr[1-2]_label "iin[12]" +curr[1-2]_input Measured input current +curr[1-2]_max Maximum input current +curr[1-2]_max_alarm Current high alarm + +curr[3-4]_label "iout[1-2]" +curr[3-4]_input Measured output current +curr[3-4]_highest Highest measured output current +curr[3-4]_max Maximum output current +curr[3-4]_max_alarm Output current high alarm + +in[1-2]_label "vin[12]" +in[1-2]_input Measured input voltage +in[1-2]_highest Highest measured input voltage +in[1-2]_crit Critical maximum input voltage +in[1-2]_crit_alarm Input voltage critical high alarm +in[1-2]_min Minimum input voltage +in[1-2]_min_alarm Input voltage low alarm +in[1-2]_rated_min Rated minimum input voltage +in[1-2]_rated_max Rated maximum input voltage +in1_reset_history Write to reset history for all attributes + +in[3-5]_label "vmon[1-3]" +in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins + Only available if enabled with MFR_ADC_CONTROL_LT7182S + command. + +in[3-4|6-7]_label "vout[1-2]" +in[3-4|6-7]_input Measured output voltage +in[3-4|6-7]_highest Highest measured output voltage +in[3-4|6-7]_lcrit Critical minimum output voltage +in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm +in[3-4|6-7]_min Minimum output voltage +in[3-4|6-7]_max_alarm Output voltage low alarm +in[3-4|6-7]_max Maximum output voltage +in[3-4|6-7]_max_alarm Output voltage high alarm +in[3-4|6-7]_crit Critical maximum output voltage +in[3-4|6-7]_crit_alarm Output voltage critical high alarm + +power[1-2]_label "pout[1-2]" +power[1-2]_input Measured output power + +temp1_input Measured temperature +temp1_crit Critical high temperature +temp1_crit_alarm Chip temperature critical high alarm +temp1_max Maximum temperature +temp1_max_alarm Chip temperature high alarm +======================= ==================================== diff --git a/Documentation/hwmon/pmbus-core.rst b/Documentation/hwmon/pmbus-core.rst index e7e0c9e..84c5a4e 100644 --- a/Documentation/hwmon/pmbus-core.rst +++ b/Documentation/hwmon/pmbus-core.rst @@ -121,6 +121,15 @@ Specifically, it provides the following information. non-standard PMBus commands to standard commands, or to augment standard command return values with device specific information. +PEC Support +=========== + +Many PMBus devices support SMBus PEC (Packet Error Checking). If supported +by both the I2C adapter and by the PMBus chip, it is by default enabled. +If PEC is supported, the PMBus core driver adds an attribute named 'pec' to +the I2C device. This attribute can be used to control PEC support in the +communication with the PMBus chip. + API functions ============= diff --git a/Documentation/index.rst b/Documentation/index.rst index 8f9be0e..67036a0 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -137,7 +137,6 @@ needed). scheduler/index mhi/index peci/index - hte/index Architecture-agnostic documentation ----------------------------------- diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst index b854bb4..6b2bac8 100644 --- a/Documentation/kbuild/llvm.rst +++ b/Documentation/kbuild/llvm.rst @@ -129,18 +129,24 @@ yet. Bug reports are always welcome at the issue tracker below! * - arm64 - Supported - ``LLVM=1`` + * - hexagon + - Maintained + - ``LLVM=1`` * - mips - Maintained - - ``CC=clang`` + - ``LLVM=1`` * - powerpc - Maintained - ``CC=clang`` * - riscv - Maintained - - ``CC=clang`` + - ``LLVM=1`` * - s390 - Maintained - ``CC=clang`` + * - um (User Mode) + - Maintained + - ``LLVM=1`` * - x86 - Supported - ``LLVM=1`` diff --git a/Documentation/livepatch/module-elf-format.rst b/Documentation/livepatch/module-elf-format.rst index dbe9b40..7347638 100644 --- a/Documentation/livepatch/module-elf-format.rst +++ b/Documentation/livepatch/module-elf-format.rst @@ -210,11 +210,11 @@ module->symtab. ===================================== Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->symtab (See layout_symtab() -in kernel/module.c). For livepatch modules, the symbol table copied into memory -on module load must be exactly the same as the symbol table produced when the -patch module was compiled. This is because the relocations in each livepatch -relocation section refer to their respective symbols with their symbol indices, -and the original symbol indices (and thus the symtab ordering) must be +in kernel/module/kallsyms.c). For livepatch modules, the symbol table copied +into memory on module load must be exactly the same as the symbol table produced +when the patch module was compiled. This is because the relocations in each +livepatch relocation section refer to their respective symbols with their symbol +indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. For example, take this particular rela from a livepatch module::: diff --git a/Documentation/loongarch/introduction.rst b/Documentation/loongarch/introduction.rst index 2bf40ad..216b3f3 100644 --- a/Documentation/loongarch/introduction.rst +++ b/Documentation/loongarch/introduction.rst @@ -45,10 +45,12 @@ Name Alias Usage Preserved ``$r23``-``$r31`` ``$s0``-``$s8`` Static registers Yes ================= =============== =================== ============ -Note: The register ``$r21`` is reserved in the ELF psABI, but used by the Linux -kernel for storing the percpu base address. It normally has no ABI name, but is -called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1`` in some old code, -however they are deprecated aliases of ``$a0`` and ``$a1`` respectively. +.. Note:: + The register ``$r21`` is reserved in the ELF psABI, but used by the Linux + kernel for storing the percpu base address. It normally has no ABI name, + but is called ``$u0`` in the kernel. You may also see ``$v0`` or ``$v1`` + in some old code,however they are deprecated aliases of ``$a0`` and ``$a1`` + respectively. FPRs ---- @@ -69,8 +71,9 @@ Name Alias Usage Preserved ``$f24``-``$f31`` ``$fs0``-``$fs7`` Static registers Yes ================= ================== =================== ============ -Note: You may see ``$fv0`` or ``$fv1`` in some old code, however they are deprecated -aliases of ``$fa0`` and ``$fa1`` respectively. +.. Note:: + You may see ``$fv0`` or ``$fv1`` in some old code, however they are + deprecated aliases of ``$fa0`` and ``$fa1`` respectively. VRs ---- diff --git a/Documentation/loongarch/irq-chip-model.rst b/Documentation/loongarch/irq-chip-model.rst index 8d88f7a..7988f41 100644 --- a/Documentation/loongarch/irq-chip-model.rst +++ b/Documentation/loongarch/irq-chip-model.rst @@ -145,12 +145,16 @@ Documentation of Loongson's LS7A chipset: https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (in English) -Note: CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described -in Section 7.4 of "LoongArch Reference Manual, Vol 1"; LIOINTC is "Legacy I/O -Interrupts" described in Section 11.1 of "Loongson 3A5000 Processor Reference -Manual"; EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of -"Loongson 3A5000 Processor Reference Manual"; HTVECINTC is "HyperTransport -Interrupts" described in Section 14.3 of "Loongson 3A5000 Processor Reference -Manual"; PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of -"Loongson 7A1000 Bridge User Manual"; PCH-LPC is "LPC Interrupts" described in -Section 24.3 of "Loongson 7A1000 Bridge User Manual". +.. Note:: + - CPUINTC is CSR.ECFG/CSR.ESTAT and its interrupt controller described + in Section 7.4 of "LoongArch Reference Manual, Vol 1"; + - LIOINTC is "Legacy I/OInterrupts" described in Section 11.1 of + "Loongson 3A5000 Processor Reference Manual"; + - EIOINTC is "Extended I/O Interrupts" described in Section 11.2 of + "Loongson 3A5000 Processor Reference Manual"; + - HTVECINTC is "HyperTransport Interrupts" described in Section 14.3 of + "Loongson 3A5000 Processor Reference Manual"; + - PCH-PIC/PCH-MSI is "Interrupt Controller" described in Section 5 of + "Loongson 7A1000 Bridge User Manual"; + - PCH-LPC is "LPC Interrupts" described in Section 24.3 of + "Loongson 7A1000 Bridge User Manual". diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index b12df91..832b5d3 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -1894,6 +1894,7 @@ There are some more advanced barrier functions: (*) dma_wmb(); (*) dma_rmb(); + (*) dma_mb(); These are for use with consistent memory to guarantee the ordering of writes or reads of shared memory accessible to both the CPU and a @@ -1925,11 +1926,11 @@ There are some more advanced barrier functions: The dma_rmb() allows us guarantee the device has released ownership before we read the data from the descriptor, and the dma_wmb() allows us to guarantee the data is written to the descriptor before the device - can see it now has ownership. Note that, when using writel(), a prior - wmb() is not needed to guarantee that the cache coherent memory writes - have completed before writing to the MMIO region. The cheaper - writel_relaxed() does not provide this guarantee and must not be used - here. + can see it now has ownership. The dma_mb() implies both a dma_rmb() and + a dma_wmb(). Note that, when using writel(), a prior wmb() is not needed + to guarantee that the cache coherent memory writes have completed before + writing to the MMIO region. The cheaper writel_relaxed() does not provide + this guarantee and must not be used here. See the subsection "Kernel I/O barrier effects" for more information on relaxed I/O accessors and the Documentation/core-api/dma-api.rst file for diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst index ed7fa76..d742ba6 100644 --- a/Documentation/networking/dsa/dsa.rst +++ b/Documentation/networking/dsa/dsa.rst @@ -503,26 +503,108 @@ per-port PHY specific details: interface connection, MDIO bus location, etc. Driver development ================== -DSA switch drivers need to implement a dsa_switch_ops structure which will +DSA switch drivers need to implement a ``dsa_switch_ops`` structure which will contain the various members described below. -``register_switch_driver()`` registers this dsa_switch_ops in its internal list -of drivers to probe for. ``unregister_switch_driver()`` does the exact opposite. +Probing, registration and device lifetime +----------------------------------------- -Unless requested differently by setting the priv_size member accordingly, DSA -does not allocate any driver private context space. +DSA switches are regular ``device`` structures on buses (be they platform, SPI, +I2C, MDIO or otherwise). The DSA framework is not involved in their probing +with the device core. + +Switch registration from the perspective of a driver means passing a valid +``struct dsa_switch`` pointer to ``dsa_register_switch()``, usually from the +switch driver's probing function. The following members must be valid in the +provided structure: + +- ``ds->dev``: will be used to parse the switch's OF node or platform data. + +- ``ds->num_ports``: will be used to create the port list for this switch, and + to validate the port indices provided in the OF node. + +- ``ds->ops``: a pointer to the ``dsa_switch_ops`` structure holding the DSA + method implementations. + +- ``ds->priv``: backpointer to a driver-private data structure which can be + retrieved in all further DSA method callbacks. + +In addition, the following flags in the ``dsa_switch`` structure may optionally +be configured to obtain driver-specific behavior from the DSA core. Their +behavior when set is documented through comments in ``include/net/dsa.h``. + +- ``ds->vlan_filtering_is_global`` + +- ``ds->needs_standalone_vlan_filtering`` + +- ``ds->configure_vlan_while_not_filtering`` + +- ``ds->untag_bridge_pvid`` + +- ``ds->assisted_learning_on_cpu_port`` + +- ``ds->mtu_enforcement_ingress`` + +- ``ds->fdb_isolation`` + +Internally, DSA keeps an array of switch trees (group of switches) global to +the kernel, and attaches a ``dsa_switch`` structure to a tree on registration. +The tree ID to which the switch is attached is determined by the first u32 +number of the ``dsa,member`` property of the switch's OF node (0 if missing). +The switch ID within the tree is determined by the second u32 number of the +same OF property (0 if missing). Registering multiple switches with the same +switch ID and tree ID is illegal and will cause an error. Using platform data, +a single switch and a single switch tree is permitted. + +In case of a tree with multiple switches, probing takes place asymmetrically. +The first N-1 callers of ``dsa_register_switch()`` only add their ports to the +port list of the tree (``dst->ports``), each port having a backpointer to its +associated switch (``dp->ds``). Then, these switches exit their +``dsa_register_switch()`` call early, because ``dsa_tree_setup_routing_table()`` +has determined that the tree is not yet complete (not all ports referenced by +DSA links are present in the tree's port list). The tree becomes complete when +the last switch calls ``dsa_register_switch()``, and this triggers the effective +continuation of initialization (including the call to ``ds->ops->setup()``) for +all switches within that tree, all as part of the calling context of the last +switch's probe function. + +The opposite of registration takes place when calling ``dsa_unregister_switch()``, +which removes a switch's ports from the port list of the tree. The entire tree +is torn down when the first switch unregisters. + +It is mandatory for DSA switch drivers to implement the ``shutdown()`` callback +of their respective bus, and call ``dsa_switch_shutdown()`` from it (a minimal +version of the full teardown performed by ``dsa_unregister_switch()``). +The reason is that DSA keeps a reference on the master net device, and if the +driver for the master device decides to unbind on shutdown, DSA's reference +will block that operation from finalizing. + +Either ``dsa_switch_shutdown()`` or ``dsa_unregister_switch()`` must be called, +but not both, and the device driver model permits the bus' ``remove()`` method +to be called even if ``shutdown()`` was already called. Therefore, drivers are +expected to implement a mutual exclusion method between ``remove()`` and +``shutdown()`` by setting their drvdata to NULL after any of these has run, and +checking whether the drvdata is NULL before proceeding to take any action. + +After ``dsa_switch_shutdown()`` or ``dsa_unregister_switch()`` was called, no +further callbacks via the provided ``dsa_switch_ops`` may take place, and the +driver may free the data structures associated with the ``dsa_switch``. Switch configuration -------------------- -- ``tag_protocol``: this is to indicate what kind of tagging protocol is supported, - should be a valid value from the ``dsa_tag_protocol`` enum +- ``get_tag_protocol``: this is to indicate what kind of tagging protocol is + supported, should be a valid value from the ``dsa_tag_protocol`` enum. + The returned information does not have to be static; the driver is passed the + CPU port number, as well as the tagging protocol of a possibly stacked + upstream switch, in case there are hardware limitations in terms of supported + tag formats. -- ``probe``: probe routine which will be invoked by the DSA platform device upon - registration to test for the presence/absence of a switch device. For MDIO - devices, it is recommended to issue a read towards internal registers using - the switch pseudo-PHY and return whether this is a supported device. For other - buses, return a non-NULL string +- ``change_tag_protocol``: when the default tagging protocol has compatibility + problems with the master or other issues, the driver may support changing it + at runtime, either through a device tree property or through sysfs. In that + case, further calls to ``get_tag_protocol`` should report the protocol in + current use. - ``setup``: setup function for the switch, this function is responsible for setting up the ``dsa_switch_ops`` private structure with all it needs: register maps, @@ -535,7 +617,17 @@ Switch configuration fully configured and ready to serve any kind of request. It is recommended to issue a software reset of the switch during this setup function in order to avoid relying on what a previous software agent such as a bootloader/firmware - may have previously configured. + may have previously configured. The method responsible for undoing any + applicable allocations or operations done here is ``teardown``. + +- ``port_setup`` and ``port_teardown``: methods for initialization and + destruction of per-port data structures. It is mandatory for some operations + such as registering and unregistering devlink port regions to be done from + these methods, otherwise they are optional. A port will be torn down only if + it has been previously set up. It is possible for a port to be set up during + probing only to be torn down immediately afterwards, for example in case its + PHY cannot be found. In this case, probing of the DSA switch continues + without that particular port. PHY devices and link management ------------------------------- @@ -635,26 +727,198 @@ Power management ``BR_STATE_DISABLED`` and propagating changes to the hardware if this port is disabled while being a bridge member +Address databases +----------------- + +Switching hardware is expected to have a table for FDB entries, however not all +of them are active at the same time. An address database is the subset (partition) +of FDB entries that is active (can be matched by address learning on RX, or FDB +lookup on TX) depending on the state of the port. An address database may +occasionally be called "FID" (Filtering ID) in this document, although the +underlying implementation may choose whatever is available to the hardware. + +For example, all ports that belong to a VLAN-unaware bridge (which is +*currently* VLAN-unaware) are expected to learn source addresses in the +database associated by the driver with that bridge (and not with other +VLAN-unaware bridges). During forwarding and FDB lookup, a packet received on a +VLAN-unaware bridge port should be able to find a VLAN-unaware FDB entry having +the same MAC DA as the packet, which is present on another port member of the +same bridge. At the same time, the FDB lookup process must be able to not find +an FDB entry having the same MAC DA as the packet, if that entry points towards +a port which is a member of a different VLAN-unaware bridge (and is therefore +associated with a different address database). + +Similarly, each VLAN of each offloaded VLAN-aware bridge should have an +associated address database, which is shared by all ports which are members of +that VLAN, but not shared by ports belonging to different bridges that are +members of the same VID. + +In this context, a VLAN-unaware database means that all packets are expected to +match on it irrespective of VLAN ID (only MAC address lookup), whereas a +VLAN-aware database means that packets are supposed to match based on the VLAN +ID from the classified 802.1Q header (or the pvid if untagged). + +At the bridge layer, VLAN-unaware FDB entries have the special VID value of 0, +whereas VLAN-aware FDB entries have non-zero VID values. Note that a +VLAN-unaware bridge may have VLAN-aware (non-zero VID) FDB entries, and a +VLAN-aware bridge may have VLAN-unaware FDB entries. As in hardware, the +software bridge keeps separate address databases, and offloads to hardware the +FDB entries belonging to these databases, through switchdev, asynchronously +relative to the moment when the databases become active or inactive. + +When a user port operates in standalone mode, its driver should configure it to +use a separate database called a port private database. This is different from +the databases described above, and should impede operation as standalone port +(packet in, packet out to the CPU port) as little as possible. For example, +on ingress, it should not attempt to learn the MAC SA of ingress traffic, since +learning is a bridging layer service and this is a standalone port, therefore +it would consume useless space. With no address learning, the port private +database should be empty in a naive implementation, and in this case, all +received packets should be trivially flooded to the CPU port. + +DSA (cascade) and CPU ports are also called "shared" ports because they service +multiple address databases, and the database that a packet should be associated +to is usually embedded in the DSA tag. This means that the CPU port may +simultaneously transport packets coming from a standalone port (which were +classified by hardware in one address database), and from a bridge port (which +were classified to a different address database). + +Switch drivers which satisfy certain criteria are able to optimize the naive +configuration by removing the CPU port from the flooding domain of the switch, +and just program the hardware with FDB entries pointing towards the CPU port +for which it is known that software is interested in those MAC addresses. +Packets which do not match a known FDB entry will not be delivered to the CPU, +which will save CPU cycles required for creating an skb just to drop it. + +DSA is able to perform host address filtering for the following kinds of +addresses: + +- Primary unicast MAC addresses of ports (``dev->dev_addr``). These are + associated with the port private database of the respective user port, + and the driver is notified to install them through ``port_fdb_add`` towards + the CPU port. + +- Secondary unicast and multicast MAC addresses of ports (addresses added + through ``dev_uc_add()`` and ``dev_mc_add()``). These are also associated + with the port private database of the respective user port. + +- Local/permanent bridge FDB entries (``BR_FDB_LOCAL``). These are the MAC + addresses of the bridge ports, for which packets must be terminated locally + and not forwarded. They are associated with the address database for that + bridge. + +- Static bridge FDB entries installed towards foreign (non-DSA) interfaces + present in the same bridge as some DSA switch ports. These are also + associated with the address database for that bridge. + +- Dynamically learned FDB entries on foreign interfaces present in the same + bridge as some DSA switch ports, only if ``ds->assisted_learning_on_cpu_port`` + is set to true by the driver. These are associated with the address database + for that bridge. + +For various operations detailed below, DSA provides a ``dsa_db`` structure +which can be of the following types: + +- ``DSA_DB_PORT``: the FDB (or MDB) entry to be installed or deleted belongs to + the port private database of user port ``db->dp``. +- ``DSA_DB_BRIDGE``: the entry belongs to one of the address databases of bridge + ``db->bridge``. Separation between the VLAN-unaware database and the per-VID + databases of this bridge is expected to be done by the driver. +- ``DSA_DB_LAG``: the entry belongs to the address database of LAG ``db->lag``. + Note: ``DSA_DB_LAG`` is currently unused and may be removed in the future. + +The drivers which act upon the ``dsa_db`` argument in ``port_fdb_add``, +``port_mdb_add`` etc should declare ``ds->fdb_isolation`` as true. + +DSA associates each offloaded bridge and each offloaded LAG with a one-based ID +(``struct dsa_bridge :: num``, ``struct dsa_lag :: id``) for the purposes of +refcounting addresses on shared ports. Drivers may piggyback on DSA's numbering +scheme (the ID is readable through ``db->bridge.num`` and ``db->lag.id`` or may +implement their own. + +Only the drivers which declare support for FDB isolation are notified of FDB +entries on the CPU port belonging to ``DSA_DB_PORT`` databases. +For compatibility/legacy reasons, ``DSA_DB_BRIDGE`` addresses are notified to +drivers even if they do not support FDB isolation. However, ``db->bridge.num`` +and ``db->lag.id`` are always set to 0 in that case (to denote the lack of +isolation, for refcounting purposes). + +Note that it is not mandatory for a switch driver to implement physically +separate address databases for each standalone user port. Since FDB entries in +the port private databases will always point to the CPU port, there is no risk +for incorrect forwarding decisions. In this case, all standalone ports may +share the same database, but the reference counting of host-filtered addresses +(not deleting the FDB entry for a port's MAC address if it's still in use by +another port) becomes the responsibility of the driver, because DSA is unaware +that the port databases are in fact shared. This can be achieved by calling +``dsa_fdb_present_in_other_db()`` and ``dsa_mdb_present_in_other_db()``. +The down side is that the RX filtering lists of each user port are in fact +shared, which means that user port A may accept a packet with a MAC DA it +shouldn't have, only because that MAC address was in the RX filtering list of +user port B. These packets will still be dropped in software, however. + Bridge layer ------------ +Offloading the bridge forwarding plane is optional and handled by the methods +below. They may be absent, return -EOPNOTSUPP, or ``ds->max_num_bridges`` may +be non-zero and exceeded, and in this case, joining a bridge port is still +possible, but the packet forwarding will take place in software, and the ports +under a software bridge must remain configured in the same way as for +standalone operation, i.e. have all bridging service functions (address +learning etc) disabled, and send all received packets to the CPU port only. + +Concretely, a port starts offloading the forwarding plane of a bridge once it +returns success to the ``port_bridge_join`` method, and stops doing so after +``port_bridge_leave`` has been called. Offloading the bridge means autonomously +learning FDB entries in accordance with the software bridge port's state, and +autonomously forwarding (or flooding) received packets without CPU intervention. +This is optional even when offloading a bridge port. Tagging protocol drivers +are expected to call ``dsa_default_offload_fwd_mark(skb)`` for packets which +have already been autonomously forwarded in the forwarding domain of the +ingress switch port. DSA, through ``dsa_port_devlink_setup()``, considers all +switch ports part of the same tree ID to be part of the same bridge forwarding +domain (capable of autonomous forwarding to each other). + +Offloading the TX forwarding process of a bridge is a distinct concept from +simply offloading its forwarding plane, and refers to the ability of certain +driver and tag protocol combinations to transmit a single skb coming from the +bridge device's transmit function to potentially multiple egress ports (and +thereby avoid its cloning in software). + +Packets for which the bridge requests this behavior are called data plane +packets and have ``skb->offload_fwd_mark`` set to true in the tag protocol +driver's ``xmit`` function. Data plane packets are subject to FDB lookup, +hardware learning on the CPU port, and do not override the port STP state. +Additionally, replication of data plane packets (multicast, flooding) is +handled in hardware and the bridge driver will transmit a single skb for each +packet that may or may not need replication. + +When the TX forwarding offload is enabled, the tag protocol driver is +responsible to inject packets into the data plane of the hardware towards the +correct bridging domain (FID) that the port is a part of. The port may be +VLAN-unaware, and in this case the FID must be equal to the FID used by the +driver for its VLAN-unaware address database associated with that bridge. +Alternatively, the bridge may be VLAN-aware, and in that case, it is guaranteed +that the packet is also VLAN-tagged with the VLAN ID that the bridge processed +this packet in. It is the responsibility of the hardware to untag the VID on +the egress-untagged ports, or keep the tag on the egress-tagged ones. + - ``port_bridge_join``: bridge layer function invoked when a given switch port is added to a bridge, this function should do what's necessary at the switch level to permit the joining port to be added to the relevant logical domain for it to ingress/egress traffic with other members of the bridge. + By setting the ``tx_fwd_offload`` argument to true, the TX forwarding process + of this bridge is also offloaded. - ``port_bridge_leave``: bridge layer function invoked when a given switch port is removed from a bridge, this function should do what's necessary at the switch level to deny the leaving port from ingress/egress traffic from the - remaining bridge members. When the port leaves the bridge, it should be aged - out at the switch hardware for the switch to (re) learn MAC addresses behind - this port. + remaining bridge members. - ``port_stp_state_set``: bridge layer function invoked when a given switch port STP state is computed by the bridge layer and should be propagated to switch - hardware to forward/block/learn traffic. The switch driver is responsible for - computing a STP state change based on current and asked parameters and perform - the relevant ageing based on the intersection results + hardware to forward/block/learn traffic. - ``port_bridge_flags``: bridge layer function invoked when a port must configure its settings for e.g. flooding of unknown traffic or source address @@ -667,21 +931,11 @@ Bridge layer CPU port, and flooding towards the CPU port should also be enabled, due to a lack of an explicit address filtering mechanism in the DSA core. -- ``port_bridge_tx_fwd_offload``: bridge layer function invoked after - ``port_bridge_join`` when a driver sets ``ds->num_fwd_offloading_bridges`` to - a non-zero value. Returning success in this function activates the TX - forwarding offload bridge feature for this port, which enables the tagging - protocol driver to inject data plane packets towards the bridging domain that - the port is a part of. Data plane packets are subject to FDB lookup, hardware - learning on the CPU port, and do not override the port STP state. - Additionally, replication of data plane packets (multicast, flooding) is - handled in hardware and the bridge driver will transmit a single skb for each - packet that needs replication. The method is provided as a configuration - point for drivers that need to configure the hardware for enabling this - feature. - -- ``port_bridge_tx_fwd_unoffload``: bridge layer function invoked when a driver - leaves a bridge port which had the TX forwarding offload feature enabled. +- ``port_fast_age``: bridge layer function invoked when flushing the + dynamically learned FDB entries on the port is necessary. This is called when + transitioning from an STP state where learning should take place to an STP + state where it shouldn't, or when leaving a bridge, or when address learning + is turned off via ``port_bridge_flags``. Bridge VLAN filtering --------------------- @@ -697,55 +951,44 @@ Bridge VLAN filtering allowed. - ``port_vlan_add``: bridge layer function invoked when a VLAN is configured - (tagged or untagged) for the given switch port. If the operation is not - supported by the hardware, this function should return ``-EOPNOTSUPP`` to - inform the bridge code to fallback to a software implementation. + (tagged or untagged) for the given switch port. The CPU port becomes a member + of a VLAN only if a foreign bridge port is also a member of it (and + forwarding needs to take place in software), or the VLAN is installed to the + VLAN group of the bridge device itself, for termination purposes + (``bridge vlan add dev br0 vid 100 self``). VLANs on shared ports are + reference counted and removed when there is no user left. Drivers do not need + to manually install a VLAN on the CPU port. - ``port_vlan_del``: bridge layer function invoked when a VLAN is removed from the given switch port -- ``port_vlan_dump``: bridge layer function invoked with a switchdev callback - function that the driver has to call for each VLAN the given port is a member - of. A switchdev object is used to carry the VID and bridge flags. - - ``port_fdb_add``: bridge layer function invoked when the bridge wants to install a Forwarding Database entry, the switch hardware should be programmed with the specified address in the specified VLAN Id in the forwarding database - associated with this VLAN ID. If the operation is not supported, this - function should return ``-EOPNOTSUPP`` to inform the bridge code to fallback to - a software implementation. - -.. note:: VLAN ID 0 corresponds to the port private database, which, in the context - of DSA, would be its port-based VLAN, used by the associated bridge device. + associated with this VLAN ID. - ``port_fdb_del``: bridge layer function invoked when the bridge wants to remove a Forwarding Database entry, the switch hardware should be programmed to delete the specified MAC address from the specified VLAN ID if it was mapped into this port forwarding database -- ``port_fdb_dump``: bridge layer function invoked with a switchdev callback - function that the driver has to call for each MAC address known to be behind - the given port. A switchdev object is used to carry the VID and FDB info. +- ``port_fdb_dump``: bridge bypass function invoked by ``ndo_fdb_dump`` on the + physical DSA port interfaces. Since DSA does not attempt to keep in sync its + hardware FDB entries with the software bridge, this method is implemented as + a means to view the entries visible on user ports in the hardware database. + The entries reported by this function have the ``self`` flag in the output of + the ``bridge fdb show`` command. - ``port_mdb_add``: bridge layer function invoked when the bridge wants to install - a multicast database entry. If the operation is not supported, this function - should return ``-EOPNOTSUPP`` to inform the bridge code to fallback to a - software implementation. The switch hardware should be programmed with the + a multicast database entry. The switch hardware should be programmed with the specified address in the specified VLAN ID in the forwarding database associated with this VLAN ID. -.. note:: VLAN ID 0 corresponds to the port private database, which, in the context - of DSA, would be its port-based VLAN, used by the associated bridge device. - - ``port_mdb_del``: bridge layer function invoked when the bridge wants to remove a multicast database entry, the switch hardware should be programmed to delete the specified MAC address from the specified VLAN ID if it was mapped into this port forwarding database. -- ``port_mdb_dump``: bridge layer function invoked with a switchdev callback - function that the driver has to call for each MAC address known to be behind - the given port. A switchdev object is used to carry the VID and MDB info. - Link aggregation ---------------- diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 0421656..d7a1bf1 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1052,11 +1052,7 @@ udp_rmem_min - INTEGER Default: 4K udp_wmem_min - INTEGER - Minimal size of send buffer used by UDP sockets in moderation. - Each UDP socket is able to use the size for sending data, even if - total pages of UDP sockets exceed udp_mem pressure. The unit is byte. - - Default: 4K + UDP does not have tx memory accounting and this tunable has no effect. RAW variables ============= @@ -1085,7 +1081,7 @@ cipso_cache_enable - BOOLEAN cipso_cache_bucket_size - INTEGER The CIPSO label cache consists of a fixed size hash table with each hash bucket containing a number of cache entries. This variable limits - the number of entries in each hash bucket; the larger the value the + the number of entries in each hash bucket; the larger the value is, the more CIPSO label mappings that can be cached. When the number of entries in a given hash bucket reaches this limit adding new entries causes the oldest entry in the bucket to be removed to make room. @@ -1179,7 +1175,7 @@ ip_autobind_reuse - BOOLEAN option should only be set by experts. Default: 0 -ip_dynaddr - BOOLEAN +ip_dynaddr - INTEGER If set non-zero, enables support for dynamic addresses. If set to a non-zero value larger than 1, a kernel log message will be printed when dynamic address rewriting @@ -2870,7 +2866,14 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max Default: 4K sctp_wmem - vector of 3 INTEGERs: min, default, max - Currently this tunable has no effect. + Only the first value ("min") is used, "default" and "max" are + ignored. + + min: Minimum size of send buffer that can be used by SCTP sockets. + It is guaranteed to each SCTP socket (but not association) even + under moderate memory pressure. + + Default: 4K addr_scope_policy - INTEGER Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00 @@ -2925,6 +2928,43 @@ plpmtud_probe_interval - INTEGER Default: 0 +reconf_enable - BOOLEAN + Enable or disable extension of Stream Reconfiguration functionality + specified in RFC6525. This extension provides the ability to "reset" + a stream, and it includes the Parameters of "Outgoing/Incoming SSN + Reset", "SSN/TSN Reset" and "Add Outgoing/Incoming Streams". + + - 1: Enable extension. + - 0: Disable extension. + + Default: 0 + +intl_enable - BOOLEAN + Enable or disable extension of User Message Interleaving functionality + specified in RFC8260. This extension allows the interleaving of user + messages sent on different streams. With this feature enabled, I-DATA + chunk will replace DATA chunk to carry user messages if also supported + by the peer. Note that to use this feature, one needs to set this option + to 1 and also needs to set socket options SCTP_FRAGMENT_INTERLEAVE to 2 + and SCTP_INTERLEAVING_SUPPORTED to 1. + + - 1: Enable extension. + - 0: Disable extension. + + Default: 0 + +ecn_enable - BOOLEAN + Control use of Explicit Congestion Notification (ECN) by SCTP. + Like in TCP, ECN is used only when both ends of the SCTP connection + indicate support for it. This feature is useful in avoiding losses + due to congestion by allowing supporting routers to signal congestion + before having to drop packets. + + 1: Enable ecn. + 0: Disable ecn. + + Default: 1 + ``/proc/sys/net/core/*`` ======================== diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index d43da70..704f31d 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -104,7 +104,7 @@ Whenever possible, use the PHY side RGMII delay for these reasons: * PHY device drivers in PHYLIB being reusable by nature, being able to configure correctly a specified delay enables more designs with similar delay - requirements to be operate correctly + requirements to be operated correctly For cases where the PHY is not capable of providing this delay, but the Ethernet MAC driver is capable of doing so, the correct phy_interface_t value diff --git a/Documentation/power/energy-model.rst b/Documentation/power/energy-model.rst index feb257b..ef341be2 100644 --- a/Documentation/power/energy-model.rst +++ b/Documentation/power/energy-model.rst @@ -20,20 +20,20 @@ possible source of information on its own, the EM framework intervenes as an abstraction layer which standardizes the format of power cost tables in the kernel, hence enabling to avoid redundant work. -The power values might be expressed in milli-Watts or in an 'abstract scale'. +The power values might be expressed in micro-Watts or in an 'abstract scale'. Multiple subsystems might use the EM and it is up to the system integrator to check that the requirements for the power value scale types are met. An example can be found in the Energy-Aware Scheduler documentation Documentation/scheduler/sched-energy.rst. For some subsystems like thermal or powercap power values expressed in an 'abstract scale' might cause issues. These subsystems are more interested in estimation of power used in the past, -thus the real milli-Watts might be needed. An example of these requirements can +thus the real micro-Watts might be needed. An example of these requirements can be found in the Intelligent Power Allocation in Documentation/driver-api/thermal/power_allocator.rst. Kernel subsystems might implement automatic detection to check whether EM registered devices have inconsistent scale (based on EM internal flag). Important thing to keep in mind is that when the power values are expressed in -an 'abstract scale' deriving real energy in milli-Joules would not be possible. +an 'abstract scale' deriving real energy in micro-Joules would not be possible. The figure below depicts an example of drivers (Arm-specific here, but the approach is applicable to any architecture) providing power costs to the EM @@ -98,7 +98,7 @@ Drivers are expected to register performance domains into the EM framework by calling the following API:: int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states, - struct em_data_callback *cb, cpumask_t *cpus, bool milliwatts); + struct em_data_callback *cb, cpumask_t *cpus, bool microwatts); Drivers must provide a callback function returning tuples for each performance state. The callback function provided by the driver is free @@ -106,10 +106,10 @@ to fetch data from any relevant location (DT, firmware, ...), and by any mean deemed necessary. Only for CPU devices, drivers must specify the CPUs of the performance domains using cpumask. For other devices than CPUs the last argument must be set to NULL. -The last argument 'milliwatts' is important to set with correct value. Kernel +The last argument 'microwatts' is important to set with correct value. Kernel subsystems which use EM might rely on this flag to check if all EM devices use the same scale. If there are different scales, these subsystems might decide -to: return warning/error, stop working or panic. +to return warning/error, stop working or panic. See Section 3. for an example of driver implementing this callback, or Section 2.4 for further documentation on this API @@ -137,7 +137,7 @@ The .get_cost() allows to provide the 'cost' values which reflect the efficiency of the CPUs. This would allow to provide EAS information which has different relation than what would be forced by the EM internal formulas calculating 'cost' values. To register an EM for such platform, the -driver must set the flag 'milliwatts' to 0, provide .get_power() callback +driver must set the flag 'microwatts' to 0, provide .get_power() callback and provide .get_cost() callback. The EM framework would handle such platform properly during registration. A flag EM_PERF_DOMAIN_ARTIFICIAL is set for such platform. Special care should be taken by other frameworks which are using EM diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst index b04fb18..a125544 100644 --- a/Documentation/power/pci.rst +++ b/Documentation/power/pci.rst @@ -315,7 +315,7 @@ that these callbacks operate on:: configuration space */ unsigned int pme_support:5; /* Bitmask of states from which PME# can be generated */ - unsigned int pme_interrupt:1;/* Is native PCIe PME signaling used? */ + unsigned int pme_poll:1; /* Poll device's PME status bit */ unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* D1 and D2 are forbidden */ diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index 34415ae..19c286c 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -32,6 +32,7 @@ you probably needn't concern yourself with pcmciautils. GNU C 5.1 gcc --version Clang/LLVM (optional) 11.0.0 clang --version GNU make 3.81 make --version +bash 4.2 bash --version binutils 2.23 ld -v flex 2.5.35 flex --version bison 2.0 bison --version @@ -84,6 +85,12 @@ Make You will need GNU make 3.81 or later to build the kernel. +Bash +---- + +Some bash scripts are used for the kernel build. +Bash 4.2 or newer is needed. + Binutils -------- @@ -362,6 +369,11 @@ Make - +Bash +---- + +- + Binutils -------- diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index c456b52..d140070 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -6,6 +6,15 @@ netdev FAQ ========== +tl;dr +----- + + - designate your patch to a tree - ``[PATCH net]`` or ``[PATCH net-next]`` + - for fixes the ``Fixes:`` tag is required, regardless of the tree + - don't post large series (> 15 patches), break them up + - don't repost your patches within one 24h period + - reverse xmas tree + What is netdev? --------------- It is a mailing list for all network-related Linux stuff. This @@ -136,6 +145,20 @@ it to the maintainer to figure out what is the most recent and current version that should be applied. If there is any doubt, the maintainer will reply and ask what should be done. +How do I divide my work into patches? +------------------------------------- + +Put yourself in the shoes of the reviewer. Each patch is read separately +and therefore should constitute a comprehensible step towards your stated +goal. + +Avoid sending series longer than 15 patches. Larger series takes longer +to review as reviewers will defer looking at it until they find a large +chunk of time. A small series can be reviewed in a short time, so Maintainers +just do it. As a result, a sequence of smaller series gets merged quicker and +with better review coverage. Re-posting large series also increases the mailing +list traffic. + I made changes to only a few patches in a patch series should I resend only those changed? ------------------------------------------------------------------------------------------ No, please resend the entire patch series and make sure you do number your @@ -183,6 +206,19 @@ it is requested that you make it look like this:: * another line of text */ +What is "reverse xmas tree"? +---------------------------- + +Netdev has a convention for ordering local variables in functions. +Order the variable declaration lines longest to shortest, e.g.:: + + struct scatterlist *sg; + struct sk_buff *skb; + int err, i; + +If there are dependencies between the variables preventing the ordering +move the initialization out of line. + I am working in existing code which uses non-standard formatting. Which formatting should I use? ------------------------------------------------------------------------------------------------ Make your code follow the most recent guidelines, so that eventually all code diff --git a/Documentation/scsi/scsi_eh.rst b/Documentation/scsi/scsi_eh.rst index 885395d..bad624f 100644 --- a/Documentation/scsi/scsi_eh.rst +++ b/Documentation/scsi/scsi_eh.rst @@ -87,8 +87,7 @@ with the command. 1.2.2 Completing a scmd w/ timeout ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The timeout handler is scsi_times_out(). When a timeout occurs, this -function +The timeout handler is scsi_timeout(). When a timeout occurs, this function 1. invokes optional hostt->eh_timed_out() callback. Return value can be one of diff --git a/Documentation/scsi/scsi_mid_low_api.rst b/Documentation/scsi/scsi_mid_low_api.rst index 63ddea2..a8c5bd1 100644 --- a/Documentation/scsi/scsi_mid_low_api.rst +++ b/Documentation/scsi/scsi_mid_low_api.rst @@ -731,7 +731,7 @@ Details:: * Notes: If 'no_async_abort' is defined this callback * will be invoked from scsi_eh thread. No other commands * will then be queued on current host during eh. - * Otherwise it will be called whenever scsi_times_out() + * Otherwise it will be called whenever scsi_timeout() * is called due to a command timeout. * * Optionally defined in: LLD diff --git a/Documentation/sound/soc/dai.rst b/Documentation/sound/soc/dai.rst index 009b07e..bf84313 100644 --- a/Documentation/sound/soc/dai.rst +++ b/Documentation/sound/soc/dai.rst @@ -10,7 +10,7 @@ AC97 ==== AC97 is a five wire interface commonly found on many PC sound cards. It is -now also popular in many portable devices. This DAI has a reset line and time +now also popular in many portable devices. This DAI has a RESET line and time multiplexes its data on its SDATA_OUT (playback) and SDATA_IN (capture) lines. The bit clock (BCLK) is always driven by the CODEC (usually 12.288MHz) and the frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97 diff --git a/Documentation/staging/static-keys.rst b/Documentation/staging/static-keys.rst index 38290b9..b0a519f 100644 --- a/Documentation/staging/static-keys.rst +++ b/Documentation/staging/static-keys.rst @@ -201,9 +201,6 @@ static_key->entry field makes use of the two least significant bits. * ``void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type)``, see: arch/x86/kernel/jump_label.c -* ``__init_or_module void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type)``, - see: arch/x86/kernel/jump_label.c - * ``struct jump_entry``, see: arch/x86/include/asm/jump_label.h diff --git a/Documentation/translations/it_IT/core-api/symbol-namespaces.rst b/Documentation/translations/it_IT/core-api/symbol-namespaces.rst index 42f5d04..0f68988 100644 --- a/Documentation/translations/it_IT/core-api/symbol-namespaces.rst +++ b/Documentation/translations/it_IT/core-api/symbol-namespaces.rst @@ -50,9 +50,9 @@ Di conseguenza, nella tabella dei simboli del kernel ci sarà una voce rappresentata dalla struttura ``kernel_symbol`` che avrà il campo ``namespace`` (spazio dei nomi) impostato. Un simbolo esportato senza uno spazio dei nomi avrà questo campo impostato a ``NULL``. Non esiste uno spazio dei nomi -di base. Il programma ``modpost`` e il codice in kernel/module.c usano lo spazio -dei nomi, rispettivamente, durante la compilazione e durante il caricamento -di un modulo. +di base. Il programma ``modpost`` e il codice in kernel/module/main.c usano lo +spazio dei nomi, rispettivamente, durante la compilazione e durante il +caricamento di un modulo. 2.2 Usare il simbolo di preprocessore DEFAULT_SYMBOL_NAMESPACE ============================================================== diff --git a/Documentation/translations/zh_CN/core-api/kernel-api.rst b/Documentation/translations/zh_CN/core-api/kernel-api.rst index e45fe80..962d31d 100644 --- a/Documentation/translations/zh_CN/core-api/kernel-api.rst +++ b/Documentation/translations/zh_CN/core-api/kernel-api.rst @@ -224,7 +224,7 @@ kernel/kmod.c 模块接口支持 ------------ -更多信息请参考文件kernel/module.c。 +更多信息请参阅kernel/module/目录下的文件。 硬件接口 ======== diff --git a/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst b/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst index 6abf7ed..bb16f06 100644 --- a/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst +++ b/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst @@ -52,7 +52,7 @@ 相应的 ksymtab 条目结构体 ``kernel_symbol`` 将有相应的成员 ``命名空间`` 集。 导出时未指明命名空间的符号将指向 ``NULL`` 。如果没有定义命名空间，则默认没有。 -``modpost`` 和kernel/module.c分别在构建时或模块加载时使用名称空间。 +``modpost`` 和kernel/module/main.c分别在构建时或模块加载时使用名称空间。 2.2 使用DEFAULT_SYMBOL_NAMESPACE定义 ==================================== diff --git a/Documentation/translations/zh_CN/loongarch/introduction.rst b/Documentation/translations/zh_CN/loongarch/introduction.rst index e31a1a9..11686ee 100644 --- a/Documentation/translations/zh_CN/loongarch/introduction.rst +++ b/Documentation/translations/zh_CN/loongarch/introduction.rst @@ -46,10 +46,11 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0，而其 ``$r23``-``$r31`` ``$s0``-``$s8`` 静态寄存器 是 ================= =============== =================== ========== -注意：``$r21``寄存器在ELF psABI中保留未使用，但是在Linux内核用于保存每CPU -变量基地址。该寄存器没有ABI命名，不过在内核中称为``$u0``。在一些遗留代码 -中有时可能见到``$v0``和``$v1``，它们是``$a0``和``$a1``的别名，属于已经废弃 -的用法。 +.. note:: + 注意： ``$r21`` 寄存器在ELF psABI中保留未使用，但是在Linux内核用于保 + 存每CPU变量基地址。该寄存器没有ABI命名，不过在内核中称为 ``$u0`` 。在 + 一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ，它们是 ``$a0`` 和 + ``$a1`` 的别名，属于已经废弃的用法。 浮点寄存器 ---------- @@ -68,8 +69,9 @@ LA64中每个寄存器为64位宽。 ``$r0`` 的内容总是固定为0，而其 ``$f24``-``$f31`` ``$fs0``-``$fs7`` 静态寄存器 是 ================= ================== =================== ========== -注意：在一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ，它们是 ``$a0`` -和 ``$a1`` 的别名，属于已经废弃的用法。 +.. note:: + 注意：在一些遗留代码中有时可能见到 ``$v0`` 和 ``$v1`` ，它们是 + ``$a0`` 和 ``$a1`` 的别名，属于已经废弃的用法。 向量寄存器 diff --git a/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst b/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst index 2a4c3ad..fb5d23b 100644 --- a/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst +++ b/Documentation/translations/zh_CN/loongarch/irq-chip-model.rst @@ -147,9 +147,11 @@ PCH-LPC:: https://github.com/loongson/LoongArch-Documentation/releases/latest/download/Loongson-7A1000-usermanual-2.00-EN.pdf (英文版) -注：CPUINTC即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其中断 -控制逻辑；LIOINTC即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”；EIOINTC -即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”；HTVECINTC即《龙芯3A5000 -处理器使用手册》第14.3节所描述的“HyperTransport中断”；PCH-PIC/PCH-MSI即《龙芯7A1000æ¡¥ -片用户手册》第5章所描述的“中断控制器”；PCH-LPC即《龙芯7A1000桥片用户手册》第24.3节所 -描述的“LPC中断”。 +.. note:: + - CPUINTC：即《龙芯架构参考手册卷一》第7.4节所描述的CSR.ECFG/CSR.ESTAT寄存器及其 + 中断控制逻辑； + - LIOINTC：即《龙芯3A5000处理器使用手册》第11.1节所描述的“传统I/O中断”； + - EIOINTC：即《龙芯3A5000处理器使用手册》第11.2节所描述的“扩展I/O中断”； + - HTVECINTC：即《龙芯3A5000处理器使用手册》第14.3节所描述的“HyperTransport中断”； + - PCH-PIC/PCH-MSI：即《龙芯7A1000桥片用户手册》第5章所描述的“中断控制器”； + - PCH-LPC：即《龙芯7A1000桥片用户手册》第24.3节所描述的“LPC中断”。 diff --git a/Documentation/usb/usbmon.rst b/Documentation/usb/usbmon.rst index b0bd510..6d5ec1e 100644 --- a/Documentation/usb/usbmon.rst +++ b/Documentation/usb/usbmon.rst @@ -42,7 +42,7 @@ if usbmon is built into the kernel:: # modprobe usbmon # -Verify that bus sockets are present: +Verify that bus sockets are present:: # ls /sys/kernel/debug/usb/usbmon 0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 11e00a4..98a2839 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -5657,7 +5657,8 @@ by a string of size ``name_size``. #define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT) #define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT) #define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT) - #define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_CYCLES + #define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT) + #define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN #define KVM_STATS_BASE_SHIFT 8 #define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT) @@ -5702,14 +5703,13 @@ Bits 0-3 of ``flags`` encode the type: by the ``hist_param`` field. The range of the Nth bucket (1 <= N < ``size``) is [``hist_param``*(N-1), ``hist_param``*N), while the range of the last bucket is [``hist_param``*(``size``-1), +INF). (+INF means positive infinity - value.) The bucket value indicates how many samples fell in the bucket's range. + value.) * ``KVM_STATS_TYPE_LOG_HIST`` The statistic is reported as a logarithmic histogram. The number of buckets is specified by the ``size`` field. The range of the first bucket is [0, 1), while the range of the last bucket is [pow(2, ``size``-2), +INF). Otherwise, The Nth bucket (1 < N < ``size``) covers - [pow(2, N-2), pow(2, N-1)). The bucket value indicates how many samples fell - in the bucket's range. + [pow(2, N-2), pow(2, N-1)). Bits 4-7 of ``flags`` encode the unit: @@ -5724,6 +5724,15 @@ Bits 4-7 of ``flags`` encode the unit: It indicates that the statistics data is used to measure time or latency. * ``KVM_STATS_UNIT_CYCLES`` It indicates that the statistics data is used to measure CPU clock cycles. + * ``KVM_STATS_UNIT_BOOLEAN`` + It indicates that the statistic will always be either 0 or 1. Boolean + statistics of "peak" type will never go back from 1 to 0. Boolean + statistics can be linear histograms (with two buckets) but not logarithmic + histograms. + +Note that, in the case of histograms, the unit applies to the bucket +ranges, while the bucket value indicates how many samples fell in the +bucket's range. Bits 8-11 of ``flags``, together with ``exponent``, encode the scale of the unit: @@ -5746,7 +5755,7 @@ the corresponding statistics data. The ``bucket_size`` field is used as a parameter for histogram statistics data. It is only used by linear histogram statistics data, specifying the size of a -bucket. +bucket in the unit expressed by bits 4-11 of ``flags`` together with ``exponent``. The ``name`` field is the name string of the statistics data. The name string starts at the end of ``struct kvm_stats_desc``. The maximum length including diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst index 4d43fbc..412b276 100644 --- a/Documentation/virt/kvm/arm/hyp-abi.rst +++ b/Documentation/virt/kvm/arm/hyp-abi.rst @@ -60,12 +60,13 @@ these functions (see arch/arm{,64}/include/asm/virt.h): * :: - x0 = HVC_VHE_RESTART (arm64 only) + x0 = HVC_FINALISE_EL2 (arm64 only) - Attempt to upgrade the kernel's exception level from EL1 to EL2 by enabling - the VHE mode. This is conditioned by the CPU supporting VHE, the EL2 MMU - being off, and VHE not being disabled by any other means (command line - option, for example). + Finish configuring EL2 depending on the command-line options, + including an attempt to upgrade the kernel's exception level from + EL1 to EL2 by enabling the VHE mode. This is conditioned by the CPU + supporting VHE, the EL2 MMU being off, and VHE not being disabled by + any other means (command line option, for example). Any other value of r0/x0 triggers a hypervisor-specific handling, which is not documented here. diff --git a/Documentation/vm/hwpoison.rst b/Documentation/vm/hwpoison.rst index c742de1..b9d5253 100644 --- a/Documentation/vm/hwpoison.rst +++ b/Documentation/vm/hwpoison.rst @@ -120,7 +120,8 @@ Testing unpoison-pfn Software-unpoison page at PFN echoed into this file. This way a page can be reused again. This only works for Linux - injected failures, not for real memory failures. + injected failures, not for real memory failures. Once any hardware + memory failure happens, this feature is disabled. Note these injection interfaces are not stable and might change between kernel versions diff --git a/MAINTAINERS b/MAINTAINERS index 5c7c5d0..90bb246 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -242,6 +242,11 @@ F: include/trace/events/9p.h F: include/uapi/linux/virtio_9p.h F: net/9p/ +A64FX DIAG DRIVER +M: Hitomi Hasegawa +S: Supported +F: drivers/soc/fujitsu/a64fx-diag.c + A8293 MEDIA DRIVER M: Antti Palosaari L: linux-media@vger.kernel.org @@ -426,7 +431,7 @@ F: drivers/acpi/*thermal* ACPI VIOT DRIVER M: Jean-Philippe Brucker L: linux-acpi@vger.kernel.org -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained F: drivers/acpi/viot.c F: include/linux/acpi_viot.h @@ -959,7 +964,7 @@ F: drivers/video/fbdev/geode/ AMD IOMMU (AMD-VI) M: Joerg Roedel R: Suravee Suthikulpanit -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git F: drivers/iommu/amd/ @@ -1038,6 +1043,7 @@ F: arch/arm64/boot/dts/amd/ AMD XGBE DRIVER M: Tom Lendacky +M: "Shyam Sundar S K" L: netdev@vger.kernel.org S: Supported F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi @@ -1507,7 +1513,7 @@ F: drivers/clocksource/arm_arch_timer.c ARM HDLCD DRM DRIVER M: Liviu Dudau S: Supported -F: Documentation/devicetree/bindings/display/arm,hdlcd.txt +F: Documentation/devicetree/bindings/display/arm,hdlcd.yaml F: drivers/gpu/drm/arm/hdlcd_* ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT @@ -1542,7 +1548,7 @@ M: Mihail Atanassov L: Mali DP Maintainers S: Supported T: git git://anongit.freedesktop.org/drm/drm-misc -F: Documentation/devicetree/bindings/display/arm,komeda.txt +F: Documentation/devicetree/bindings/display/arm,komeda.yaml F: Documentation/gpu/komeda-kms.rst F: drivers/gpu/drm/arm/display/include/ F: drivers/gpu/drm/arm/display/komeda/ @@ -1564,7 +1570,7 @@ M: Brian Starkey L: Mali DP Maintainers S: Supported T: git git://anongit.freedesktop.org/drm/drm-misc -F: Documentation/devicetree/bindings/display/arm,malidp.txt +F: Documentation/devicetree/bindings/display/arm,malidp.yaml F: Documentation/gpu/afbc.rst F: drivers/gpu/drm/arm/ @@ -1893,6 +1899,7 @@ L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers) S: Supported Q: https://patchwork.ozlabs.org/project/linux-aspeed/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git +F: Documentation/devicetree/bindings/arm/aspeed/ F: arch/arm/boot/dts/aspeed-* F: arch/arm/mach-aspeed/ N: aspeed @@ -2009,7 +2016,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://github.com/ulli-kroll/linux.git F: Documentation/devicetree/bindings/arm/gemini.yaml -F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt +F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml F: arch/arm/boot/dts/gemini* @@ -2140,11 +2147,13 @@ M: Jean-Marie Verdun M: Nick Hawkins S: Maintained F: Documentation/devicetree/bindings/arm/hpe,gxp.yaml +F: Documentation/devicetree/bindings/spi/hpe,gxp-spi.yaml F: Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml F: arch/arm/boot/dts/hpe-bmc* F: arch/arm/boot/dts/hpe-gxp* F: arch/arm/mach-hpe/ F: drivers/clocksource/timer-gxp.c +F: drivers/spi/spi-gxp.c F: drivers/watchdog/gxp-wdt.c ARM/IGEP MACHINE SUPPORT @@ -2448,9 +2457,11 @@ F: Documentation/devicetree/bindings/*/*npcm* F: Documentation/devicetree/bindings/arm/npcm/* F: arch/arm/boot/dts/nuvoton-npcm* F: arch/arm/mach-npcm/ +F: arch/arm64/boot/dts/nuvoton/ F: drivers/*/*npcm* F: drivers/*/*/*npcm* F: include/dt-bindings/clock/nuvoton,npcm7xx-clock.h +F: include/dt-bindings/clock/nuvoton,npcm845-clk.h ARM/NUVOTON WPCM450 ARCHITECTURE M: Jonathan Neuschäfer @@ -2467,6 +2478,7 @@ ARM/NXP S32G ARCHITECTURE M: Chester Lin R: Andreas Färber R: Matthias Brugger +R: NXP S32 Linux Team L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm64/boot/dts/freescale/s32g*.dts* @@ -2496,10 +2508,8 @@ F: drivers/power/reset/oxnas-restart.c N: oxnas ARM/PALM TREO SUPPORT -M: Tomas Cech L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -W: http://hackndev.com +S: Orphan F: arch/arm/mach-pxa/palmtreo.* ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT @@ -2537,6 +2547,7 @@ W: http://www.armlinux.org.uk/ ARM/QUALCOMM SUPPORT M: Andy Gross M: Bjorn Andersson +R: Konrad Dybcio L: linux-arm-msm@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git @@ -2615,6 +2626,8 @@ Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/ C: irc://irc.libera.chat/renesas-soc T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next F: Documentation/devicetree/bindings/arm/renesas.yaml +F: Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml +F: Documentation/devicetree/bindings/soc/renesas/ F: arch/arm64/boot/dts/renesas/ F: drivers/soc/renesas/ F: include/linux/soc/renesas/ @@ -2733,6 +2746,7 @@ Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/ C: irc://irc.libera.chat/renesas-soc T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next F: Documentation/devicetree/bindings/arm/renesas.yaml +F: Documentation/devicetree/bindings/soc/renesas/ F: arch/arm/boot/dts/emev2* F: arch/arm/boot/dts/gr-peach* F: arch/arm/boot/dts/iwg20d-q7* @@ -2822,6 +2836,23 @@ F: drivers/clocksource/armv7m_systick.c N: stm32 N: stm +ARM/SUNPLUS SP7021 SOC SUPPORT +M: Qin Jian +L: linux-arm-kernel@lists.infradead.org (moderated for mon-subscribers) +S: Maintained +W: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview +F: Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml +F: Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml +F: Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml +F: Documentation/devicetree/bindings/reset/sunplus,reset.yaml +F: arch/arm/boot/dts/sunplus-sp7021*.dts* +F: arch/arm/configs/sp7021_*defconfig +F: arch/arm/mach-sunplus/ +F: drivers/irqchip/irq-sp7021-intc.c +F: drivers/reset/reset-sunplus.c +F: include/dt-bindings/clock/sunplus,sp7021-clkc.h +F: include/dt-bindings/reset/sunplus,sp7021-reset.h + ARM/Synaptics SoC support M: Jisheng Zhang M: Sebastian Hesselbarth @@ -3614,16 +3645,18 @@ S: Maintained F: Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml F: drivers/iio/accel/bma400* -BPF (Safe dynamic programs and tools) +BPF [GENERAL] (Safe Dynamic Programs and Tools) M: Alexei Starovoitov M: Daniel Borkmann M: Andrii Nakryiko -R: Martin KaFai Lau -R: Song Liu +R: Martin KaFai Lau +R: Song Liu R: Yonghong Song R: John Fastabend R: KP Singh -L: netdev@vger.kernel.org +R: Stanislav Fomichev +R: Hao Luo +R: Jiri Olsa L: bpf@vger.kernel.org S: Supported W: https://bpf.io/ @@ -3655,21 +3688,17 @@ F: scripts/pahole-version.sh F: tools/bpf/ F: tools/lib/bpf/ F: tools/testing/selftests/bpf/ -N: bpf -K: bpf BPF JIT for ARM M: Shubham Bansal -L: netdev@vger.kernel.org L: bpf@vger.kernel.org -S: Maintained +S: Odd Fixes F: arch/arm/net/ BPF JIT for ARM64 M: Daniel Borkmann M: Alexei Starovoitov M: Zi Shen Lim -L: netdev@vger.kernel.org L: bpf@vger.kernel.org S: Supported F: arch/arm64/net/ @@ -3677,29 +3706,26 @@ F: arch/arm64/net/ BPF JIT for MIPS (32-BIT AND 64-BIT) M: Johan Almbladh M: Paul Burton -L: netdev@vger.kernel.org L: bpf@vger.kernel.org S: Maintained F: arch/mips/net/ BPF JIT for NFP NICs M: Jakub Kicinski -L: netdev@vger.kernel.org L: bpf@vger.kernel.org -S: Supported +S: Odd Fixes F: drivers/net/ethernet/netronome/nfp/bpf/ BPF JIT for POWERPC (32-BIT AND 64-BIT) M: Naveen N. Rao -L: netdev@vger.kernel.org +M: Michael Ellerman L: bpf@vger.kernel.org -S: Maintained +S: Supported F: arch/powerpc/net/ BPF JIT for RISC-V (32-bit) M: Luke Nelson M: Xi Wang -L: netdev@vger.kernel.org L: bpf@vger.kernel.org S: Maintained F: arch/riscv/net/ @@ -3707,7 +3733,6 @@ X: arch/riscv/net/bpf_jit_comp64.c BPF JIT for RISC-V (64-bit) M: Björn Töpel -L: netdev@vger.kernel.org L: bpf@vger.kernel.org S: Maintained F: arch/riscv/net/ @@ -3717,36 +3742,80 @@ BPF JIT for S390 M: Ilya Leoshkevich M: Heiko Carstens M: Vasily Gorbik -L: netdev@vger.kernel.org L: bpf@vger.kernel.org -S: Maintained +S: Supported F: arch/s390/net/ X: arch/s390/net/pnet.c BPF JIT for SPARC (32-BIT AND 64-BIT) M: David S. Miller -L: netdev@vger.kernel.org L: bpf@vger.kernel.org -S: Maintained +S: Odd Fixes F: arch/sparc/net/ BPF JIT for X86 32-BIT M: Wang YanQing -L: netdev@vger.kernel.org L: bpf@vger.kernel.org -S: Maintained +S: Odd Fixes F: arch/x86/net/bpf_jit_comp32.c BPF JIT for X86 64-BIT M: Alexei Starovoitov M: Daniel Borkmann -L: netdev@vger.kernel.org L: bpf@vger.kernel.org S: Supported F: arch/x86/net/ X: arch/x86/net/bpf_jit_comp32.c -BPF LSM (Security Audit and Enforcement using BPF) +BPF [CORE] +M: Alexei Starovoitov +M: Daniel Borkmann +R: John Fastabend +L: bpf@vger.kernel.org +S: Maintained +F: kernel/bpf/verifier.c +F: kernel/bpf/tnum.c +F: kernel/bpf/core.c +F: kernel/bpf/syscall.c +F: kernel/bpf/dispatcher.c +F: kernel/bpf/trampoline.c +F: include/linux/bpf* +F: include/linux/filter.h + +BPF [BTF] +M: Martin KaFai Lau +L: bpf@vger.kernel.org +S: Maintained +F: kernel/bpf/btf.c +F: include/linux/btf* + +BPF [TRACING] +M: Song Liu +R: Jiri Olsa +L: bpf@vger.kernel.org +S: Maintained +F: kernel/trace/bpf_trace.c +F: kernel/bpf/stackmap.c + +BPF [NETWORKING] (tc BPF, sock_addr) +M: Martin KaFai Lau +M: Daniel Borkmann +R: John Fastabend +L: bpf@vger.kernel.org +L: netdev@vger.kernel.org +S: Maintained +F: net/core/filter.c +F: net/sched/act_bpf.c +F: net/sched/cls_bpf.c + +BPF [NETWORKING] (struct_ops, reuseport) +M: Martin KaFai Lau +L: bpf@vger.kernel.org +L: netdev@vger.kernel.org +S: Maintained +F: kernel/bpf/bpf_struct* + +BPF [SECURITY & LSM] (Security Audit and Enforcement using BPF) M: KP Singh R: Florent Revest R: Brendan Jackman @@ -3757,6 +3826,64 @@ F: include/linux/bpf_lsm.h F: kernel/bpf/bpf_lsm.c F: security/bpf/ +BPF [STORAGE & CGROUPS] +M: Martin KaFai Lau +L: bpf@vger.kernel.org +S: Maintained +F: kernel/bpf/cgroup.c +F: kernel/bpf/*storage.c +F: kernel/bpf/bpf_lru* + +BPF [RINGBUF] +M: Andrii Nakryiko +L: bpf@vger.kernel.org +S: Maintained +F: kernel/bpf/ringbuf.c + +BPF [ITERATOR] +M: Yonghong Song +L: bpf@vger.kernel.org +S: Maintained +F: kernel/bpf/*iter.c + +BPF [L7 FRAMEWORK] (sockmap) +M: John Fastabend +M: Jakub Sitnicki +L: netdev@vger.kernel.org +L: bpf@vger.kernel.org +S: Maintained +F: include/linux/skmsg.h +F: net/core/skmsg.c +F: net/core/sock_map.c +F: net/ipv4/tcp_bpf.c +F: net/ipv4/udp_bpf.c +F: net/unix/unix_bpf.c + +BPF [LIBRARY] (libbpf) +M: Andrii Nakryiko +L: bpf@vger.kernel.org +S: Maintained +F: tools/lib/bpf/ + +BPF [TOOLING] (bpftool) +M: Quentin Monnet +L: bpf@vger.kernel.org +S: Maintained +F: kernel/bpf/disasm.* +F: tools/bpf/bpftool/ + +BPF [SELFTESTS] (Test Runners & Infrastructure) +M: Andrii Nakryiko +R: Mykola Lysenko +L: bpf@vger.kernel.org +S: Maintained +F: tools/testing/selftests/bpf/ + +BPF [MISC] +L: bpf@vger.kernel.org +S: Odd Fixes +K: (?:\b|_)bpf(?:\b|_) + BROADCOM B44 10/100 ETHERNET DRIVER M: Michael Chan L: netdev@vger.kernel.org @@ -3778,23 +3905,36 @@ BROADCOM BCMBCA ARM ARCHITECTURE M: William Zhang M: Anand Gore M: Kursad Oney +M: Florian Fainelli R: Broadcom internal kernel review list L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://github.com/broadcom/stblinux.git F: Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml -F: arch/arm/boot/dts/bcm47622.dtsi -F: arch/arm/boot/dts/bcm947622.dts +F: arch/arm64/boot/dts/broadcom/bcmbca/* N: bcmbca N: bcm[9]?47622 +N: bcm[9]?4912 +N: bcm[9]?63138 +N: bcm[9]?63146 +N: bcm[9]?63148 +N: bcm[9]?63158 +N: bcm[9]?63178 +N: bcm[9]?6756 +N: bcm[9]?6813 +N: bcm[9]?6846 +N: bcm[9]?6855 +N: bcm[9]?6856 +N: bcm[9]?6858 +N: bcm[9]?6878 BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE -M: Nicolas Saenz Julienne +M: Florian Fainelli R: Broadcom internal kernel review list L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git +T: git git://github.com/broadcom/stblinux.git F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml F: drivers/pci/controller/pcie-brcmstb.c F: drivers/staging/vc04_services @@ -3862,14 +4002,6 @@ S: Maintained F: arch/arm/boot/dts/bcm47189* F: arch/arm/boot/dts/bcm53573* -BROADCOM BCM63XX ARM ARCHITECTURE -M: Florian Fainelli -R: Broadcom internal kernel review list -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -T: git git://github.com/broadcom/stblinux.git -N: bcm63xx - BROADCOM BCM63XX/BCM33XX UDC DRIVER M: Kevin Cernekee L: linux-usb@vger.kernel.org @@ -4276,7 +4408,7 @@ L: linux-pm@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git -F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt +F: Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml F: drivers/devfreq/exynos-bus.c BUSLOGIC SCSI DRIVER @@ -4866,7 +4998,7 @@ R: Nick Desaulniers L: llvm@lists.linux.dev S: Supported B: https://github.com/ClangBuiltLinux/linux/issues -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/clang/features +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening F: include/linux/cfi.h F: kernel/cfi.c @@ -4952,6 +5084,7 @@ Q: http://patchwork.kernel.org/project/linux-clk/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git F: Documentation/devicetree/bindings/clock/ F: drivers/clk/ +F: include/dt-bindings/clock/ F: include/linux/clk-pr* F: include/linux/clk/ F: include/linux/of_clk.h @@ -5002,7 +5135,7 @@ COMPUTE EXPRESS LINK (CXL) M: Alison Schofield M: Vishal Verma M: Ira Weiny -M: Ben Widawsky +M: Ben Widawsky M: Dan Williams L: linux-cxl@vger.kernel.org S: Maintained @@ -5757,6 +5890,7 @@ L: linux-pm@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git F: Documentation/devicetree/bindings/devfreq/ +F: Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml F: drivers/devfreq/ F: include/linux/devfreq.h F: include/trace/events/devfreq.h @@ -5954,7 +6088,7 @@ DMA MAPPING HELPERS M: Christoph Hellwig M: Marek Szyprowski R: Robin Murphy -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported W: http://git.infradead.org/users/hch/dma-mapping.git T: git git://git.infradead.org/users/hch/dma-mapping.git @@ -5966,7 +6100,7 @@ F: kernel/dma/ DMA MAPPING BENCHMARK M: Xiang Chen -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev F: kernel/dma/map_benchmark.c F: tools/testing/selftests/dma/ @@ -6078,7 +6212,7 @@ M: Sakari Ailus L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git -F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt +F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml F: drivers/media/i2c/dw9807-vcm.c DOUBLETALK DRIVER @@ -7387,6 +7521,8 @@ F: include/video/s1d13xxxfb.h EROFS FILE SYSTEM M: Gao Xiang M: Chao Yu +R: Yue Hu +R: Jeffle Xu L: linux-erofs@lists.ozlabs.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git @@ -7550,7 +7686,7 @@ F: drivers/gpu/drm/exynos/exynos_dp* EXYNOS SYSMMU (IOMMU) driver M: Marek Szyprowski -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained F: drivers/iommu/exynos-iommu.c @@ -7647,6 +7783,7 @@ F: include/uapi/scsi/fc/ FILE LOCKING (flock() and fcntl()/lockf()) M: Jeff Layton +M: Chuck Lever L: linux-fsdevel@vger.kernel.org S: Maintained F: fs/fcntl.c @@ -7674,9 +7811,6 @@ F: include/linux/fs.h F: include/linux/fs_types.h F: include/uapi/linux/fs.h F: include/uapi/linux/openat2.h -X: fs/io-wq.c -X: fs/io-wq.h -X: fs/io_uring.c FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER M: Riku Voipio @@ -7775,6 +7909,7 @@ FORTIFY_SOURCE M: Kees Cook L: linux-hardening@vger.kernel.org S: Supported +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening F: include/linux/fortify-string.h F: lib/test_fortify/* F: scripts/test_fortify.sh @@ -8217,6 +8352,7 @@ GCC PLUGINS M: Kees Cook L: linux-hardening@vger.kernel.org S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening F: Documentation/kbuild/gcc-plugins.rst F: scripts/Makefile.gcc-plugins F: scripts/gcc-plugins/ @@ -8471,6 +8607,7 @@ F: Documentation/devicetree/bindings/gpio/ F: Documentation/driver-api/gpio/ F: drivers/gpio/ F: include/asm-generic/gpio.h +F: include/dt-bindings/gpio/ F: include/linux/gpio.h F: include/linux/gpio/ F: include/linux/of_gpio.h @@ -8936,6 +9073,12 @@ F: Documentation/admin-guide/perf/hisi-pcie-pmu.rst F: Documentation/admin-guide/perf/hisi-pmu.rst F: drivers/perf/hisilicon +HISILICON HNS3 PMU DRIVER +M: Guangbin Huang +S: Supported +F: Documentation/admin-guide/perf/hns3-pmu.rst +F: drivers/perf/hisilicon/hns3_pmu.c + HISILICON QM AND ZIP Controller DRIVER M: Zhou Wang L: linux-crypto@vger.kernel.org @@ -9081,7 +9224,7 @@ HTE SUBSYSTEM M: Dipen Patel S: Maintained F: Documentation/devicetree/bindings/timestamp/ -F: Documentation/hte/ +F: Documentation/driver-api/hte/ F: drivers/hte/ F: include/linux/hte.h @@ -9124,6 +9267,7 @@ F: drivers/media/platform/st/sti/hva HWPOISON MEMORY FAILURE HANDLING M: Naoya Horiguchi +R: Miaohe Lin L: linux-mm@kvack.org S: Maintained F: mm/hwpoison-inject.c @@ -9268,6 +9412,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git F: Documentation/devicetree/bindings/i2c/i2c.txt F: Documentation/i2c/ F: drivers/i2c/* +F: include/dt-bindings/i2c/i2c.h F: include/linux/i2c-dev.h F: include/linux/i2c-smbus.h F: include/linux/i2c.h @@ -9283,6 +9428,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git F: Documentation/devicetree/bindings/i2c/ F: drivers/i2c/algos/ F: drivers/i2c/busses/ +F: include/dt-bindings/i2c/ I2C-TAOS-EVM DRIVER M: Jean Delvare @@ -9515,6 +9661,7 @@ F: drivers/input/misc/ideapad_slidebar.c IDMAPPED MOUNTS M: Christian Brauner +M: Seth Forshee L: linux-fsdevel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git @@ -9803,7 +9950,10 @@ INTEL ASoC DRIVERS M: Cezary Rojewski M: Pierre-Louis Bossart M: Liam Girdwood -M: Jie Yang +M: Peter Ujfalusi +M: Bard Liao +M: Ranjani Sridharan +M: Kai Vehmanen L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/intel/ @@ -9966,7 +10116,7 @@ F: drivers/hid/intel-ish-hid/ INTEL IOMMU (VT-d) M: David Woodhouse M: Lu Baolu -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git F: drivers/iommu/intel/ @@ -10345,7 +10495,7 @@ F: include/linux/iomap.h IOMMU DRIVERS M: Joerg Roedel M: Will Deacon -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git F: Documentation/devicetree/bindings/iommu/ @@ -10370,9 +10520,7 @@ L: io-uring@vger.kernel.org S: Maintained T: git git://git.kernel.dk/linux-block T: git git://git.kernel.dk/liburing -F: fs/io-wq.c -F: fs/io-wq.h -F: fs/io_uring.c +F: io_uring/ F: include/linux/io_uring.h F: include/uapi/linux/io_uring.h F: tools/io_uring/ @@ -10732,6 +10880,17 @@ F: scripts/mk* F: scripts/mod/ F: scripts/package/ +KERNEL HARDENING (not covered by other areas) +M: Kees Cook +L: linux-hardening@vger.kernel.org +S: Supported +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening +F: include/linux/overflow.h +F: include/linux/randomize_kstack.h +F: mm/usercopy.c +K: \b(add|choose)_random_kstack_offset\b +K: \b__check_(object_size|heap_object)\b + KERNEL JANITORS L: kernel-janitors@vger.kernel.org S: Odd Fixes @@ -10739,6 +10898,7 @@ W: http://kernelnewbies.org/KernelJanitors KERNEL NFSD, SUNRPC, AND LOCKD SERVERS M: Chuck Lever +M: Jeff Layton L: linux-nfs@vger.kernel.org S: Supported W: http://nfs.sourceforge.net/ @@ -10821,6 +10981,7 @@ M: Marc Zyngier R: James Morse R: Alexandru Elisei R: Suzuki K Poulose +R: Oliver Upton L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: kvmarm@lists.cs.columbia.edu (moderated for non-subscribers) S: Maintained @@ -10863,7 +11024,6 @@ F: arch/riscv/include/asm/kvm* F: arch/riscv/include/uapi/asm/kvm* F: arch/riscv/kvm/ F: tools/testing/selftests/kvm/*/riscv/ -F: tools/testing/selftests/kvm/riscv/ KERNEL VIRTUAL MACHINE for s390 (KVM/s390) M: Christian Borntraeger @@ -10888,28 +11048,51 @@ F: tools/testing/selftests/kvm/*/s390x/ F: tools/testing/selftests/kvm/s390x/ KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86) +M: Sean Christopherson M: Paolo Bonzini -R: Sean Christopherson -R: Vitaly Kuznetsov -R: Wanpeng Li -R: Jim Mattson -R: Joerg Roedel L: kvm@vger.kernel.org S: Supported -W: http://www.linux-kvm.org T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git F: arch/x86/include/asm/kvm* -F: arch/x86/include/asm/pvclock-abi.h F: arch/x86/include/asm/svm.h F: arch/x86/include/asm/vmx*.h F: arch/x86/include/uapi/asm/kvm* F: arch/x86/include/uapi/asm/svm.h F: arch/x86/include/uapi/asm/vmx.h -F: arch/x86/kernel/kvm.c -F: arch/x86/kernel/kvmclock.c F: arch/x86/kvm/ F: arch/x86/kvm/*/ +KVM PARAVIRT (KVM/paravirt) +M: Paolo Bonzini +R: Wanpeng Li +R: Vitaly Kuznetsov +L: kvm@vger.kernel.org +S: Supported +T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git +F: arch/x86/kernel/kvm.c +F: arch/x86/kernel/kvmclock.c +F: arch/x86/include/asm/pvclock-abi.h +F: include/linux/kvm_para.h +F: include/uapi/linux/kvm_para.h +F: include/uapi/asm-generic/kvm_para.h +F: include/asm-generic/kvm_para.h +F: arch/um/include/asm/kvm_para.h +F: arch/x86/include/asm/kvm_para.h +F: arch/x86/include/uapi/asm/kvm_para.h + +KVM X86 HYPER-V (KVM/hyper-v) +M: Vitaly Kuznetsov +M: Sean Christopherson +M: Paolo Bonzini +L: kvm@vger.kernel.org +S: Supported +T: git git://git.kernel.org/pub/scm/virt/kvm/kvm.git +F: arch/x86/kvm/hyperv.* +F: arch/x86/kvm/kvm_onhyperv.* +F: arch/x86/kvm/svm/hyperv.* +F: arch/x86/kvm/svm/svm_onhyperv.* +F: arch/x86/kvm/vmx/evmcs.* + KERNFS M: Greg Kroah-Hartman M: Tejun Heo @@ -11088,20 +11271,6 @@ S: Maintained F: include/net/l3mdev.h F: net/l3mdev -L7 BPF FRAMEWORK -M: John Fastabend -M: Daniel Borkmann -M: Jakub Sitnicki -L: netdev@vger.kernel.org -L: bpf@vger.kernel.org -S: Maintained -F: include/linux/skmsg.h -F: net/core/skmsg.c -F: net/core/sock_map.c -F: net/ipv4/tcp_bpf.c -F: net/ipv4/udp_bpf.c -F: net/unix/unix_bpf.c - LANDLOCK SECURITY MODULE M: Mickaël Salaün L: linux-security-module@vger.kernel.org @@ -11257,6 +11426,7 @@ M: Damien Le Moal L: linux-ide@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata.git +F: Documentation/ABI/testing/sysfs-ata F: Documentation/devicetree/bindings/ata/ F: drivers/ata/ F: include/linux/ata.h @@ -11531,7 +11701,7 @@ F: drivers/media/usb/dvb-usb-v2/lmedm04* LOADPIN SECURITY MODULE M: Kees Cook S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git lsm/loadpin +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening F: Documentation/admin-guide/LSM/LoadPin.rst F: security/loadpin/ @@ -11580,6 +11750,7 @@ F: drivers/gpu/drm/bridge/lontium-lt8912b.c LOONGARCH M: Huacai Chen R: WANG Xuerui +L: loongarch@lists.linux.dev S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git F: arch/loongarch/ @@ -12492,7 +12663,7 @@ F: drivers/i2c/busses/i2c-mt65xx.c MEDIATEK IOMMU DRIVER M: Yong Wu -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Supported F: Documentation/devicetree/bindings/iommu/mediatek* @@ -12696,7 +12867,6 @@ L: netdev@vger.kernel.org S: Supported W: http://www.mellanox.com Q: https://patchwork.kernel.org/project/netdevbpf/list/ -F: drivers/net/ethernet/mellanox/mlx5/core/accel/* F: drivers/net/ethernet/mellanox/mlx5/core/en_accel/* F: drivers/net/ethernet/mellanox/mlx5/core/fpga/* F: include/linux/mlx5/mlx5_ifc_fpga.h @@ -12836,9 +13006,8 @@ M: Andrew Morton L: linux-mm@kvack.org S: Maintained W: http://www.linux-mm.org -T: quilt https://ozlabs.org/~akpm/mmotm/ -T: quilt https://ozlabs.org/~akpm/mmots/ -T: git git://github.com/hnaz/linux-mm.git +T: git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm +T: quilt git://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new F: include/linux/gfp.h F: include/linux/memory_hotplug.h F: include/linux/mm.h @@ -12848,6 +13017,18 @@ F: include/linux/vmalloc.h F: mm/ F: tools/testing/selftests/vm/ +MEMORY HOT(UN)PLUG +M: David Hildenbrand +M: Oscar Salvador +L: linux-mm@kvack.org +S: Maintained +F: Documentation/admin-guide/mm/memory-hotplug.rst +F: Documentation/core-api/memory-hotplug.rst +F: drivers/base/memory.c +F: include/linux/memory_hotplug.h +F: mm/memory_hotplug.c +F: tools/testing/selftests/memory-hotplug/ + MEMORY TECHNOLOGY DEVICES (MTD) M: Miquel Raynal M: Richard Weinberger @@ -13792,6 +13973,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git F: Documentation/devicetree/bindings/net/ F: drivers/connector/ F: drivers/net/ +F: include/dt-bindings/net/ F: include/linux/etherdevice.h F: include/linux/fcdevice.h F: include/linux/fddidevice.h @@ -13943,7 +14125,6 @@ F: net/ipv6/tcp*.c NETWORKING [TLS] M: Boris Pismenny M: John Fastabend -M: Daniel Borkmann M: Jakub Kicinski L: netdev@vger.kernel.org S: Maintained @@ -14234,7 +14415,8 @@ S: Maintained F: drivers/net/phy/nxp-c45-tja11xx.c NXP FSPI DRIVER -M: Ashish Kumar +M: Han Xu +M: Haibo Chen R: Yogesh Gaur L: linux-spi@vger.kernel.org S: Maintained @@ -14252,7 +14434,7 @@ F: drivers/iio/gyro/fxas21002c_i2c.c F: drivers/iio/gyro/fxas21002c_spi.c NXP i.MX CLOCK DRIVERS -M: Abel Vesa +M: Abel Vesa L: linux-clk@vger.kernel.org L: linux-imx@nxp.com S: Maintained @@ -14340,9 +14522,8 @@ F: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml F: sound/soc/codecs/tfa989x.c NXP-NCI NFC DRIVER -R: Charles Gorand L: linux-nfc@lists.01.org (subscribers-only) -S: Supported +S: Orphan F: Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml F: drivers/nfc/nxp-nci @@ -14860,6 +15041,7 @@ F: include/dt-bindings/ OPENCOMPUTE PTP CLOCK DRIVER M: Jonathan Lemon +M: Vadim Fedorenko L: netdev@vger.kernel.org S: Maintained F: drivers/ptp/ptp_ocp.c @@ -15720,7 +15902,7 @@ PIN CONTROLLER - FREESCALE M: Dong Aisheng M: Fabio Estevam M: Shawn Guo -M: Stefan Agner +M: Jacky Bai R: Pengutronix Kernel Team L: linux-gpio@vger.kernel.org S: Maintained @@ -15730,7 +15912,7 @@ F: drivers/pinctrl/freescale/ PIN CONTROLLER - INTEL M: Mika Westerberg M: Andy Shevchenko -S: Maintained +S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git F: drivers/pinctrl/intel/ @@ -15824,6 +16006,14 @@ S: Maintained F: Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml F: drivers/iio/chemical/pms7003.c +PLATFORM FEATURE INFRASTRUCTURE +M: Juergen Gross +S: Maintained +F: arch/*/include/asm/platform-feature.h +F: include/asm-generic/platform-feature.h +F: include/linux/platform-feature.h +F: kernel/platform-feature.c + PLDMFW LIBRARY M: Jacob Keller S: Maintained @@ -16188,7 +16378,6 @@ F: drivers/media/rc/pwm-ir-tx.c PWM SUBSYSTEM M: Thierry Reding R: Uwe Kleine-König -M: Lee Jones L: linux-pwm@vger.kernel.org S: Maintained Q: https://patchwork.ozlabs.org/project/linux-pwm/list/ @@ -16199,6 +16388,7 @@ F: Documentation/driver-api/pwm.rst F: drivers/gpio/gpio-mvebu.c F: drivers/pwm/ F: drivers/video/backlight/pwm_bl.c +F: include/dt-bindings/pwm/ F: include/linux/pwm.h F: include/linux/pwm_backlight.h K: pwm_(config|apply_state|ops) @@ -16244,7 +16434,7 @@ F: drivers/crypto/qat/ QCOM AUDIO (ASoC) DRIVERS M: Srinivas Kandagatla -M: Banajit Goswami +M: Banajit Goswami L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/codecs/lpass-va-macro.c @@ -16471,7 +16661,7 @@ F: Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml F: drivers/cpufreq/qcom-cpufreq-nvmem.c QUALCOMM CRYPTO DRIVERS -M: Thara Gopinath +M: Thara Gopinath L: linux-crypto@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained @@ -16523,9 +16713,16 @@ S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt F: drivers/i2c/busses/i2c-qcom-cci.c +QUALCOMM INTERCONNECT BWMON DRIVER +M: Krzysztof Kozlowski +L: linux-arm-msm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +F: drivers/soc/qcom/icc-bwmon.c + QUALCOMM IOMMU M: Rob Clark -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev L: linux-arm-msm@vger.kernel.org S: Maintained F: drivers/iommu/arm/arm-smmu/qcom_iommu.c @@ -16581,7 +16778,7 @@ F: include/linux/if_rmnet.h QUALCOMM TSENS THERMAL DRIVER M: Amit Kucheria -M: Thara Gopinath +M: Thara Gopinath L: linux-pm@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained @@ -17136,13 +17333,17 @@ N: riscv K: riscv RISC-V/MICROCHIP POLARFIRE SOC SUPPORT -M: Lewis Hanly M: Conor Dooley +M: Daire McNamara L: linux-riscv@lists.infradead.org S: Supported F: arch/riscv/boot/dts/microchip/ +F: drivers/char/hw_random/mpfs-rng.c +F: drivers/clk/microchip/clk-mpfs.c F: drivers/mailbox/mailbox-mpfs.c +F: drivers/pci/controller/pcie-microchip-host.c F: drivers/soc/microchip/ +F: drivers/spi/spi-microchip-core.c F: include/soc/microchip/mpfs.h RNBD BLOCK DRIVERS @@ -17838,7 +18039,7 @@ M: Kees Cook R: Andy Lutomirski R: Will Drewry S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/seccomp F: Documentation/userspace-api/seccomp_filter.rst F: include/linux/seccomp.h F: include/uapi/linux/seccomp.h @@ -18039,6 +18240,7 @@ F: drivers/misc/sgi-xp/ SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS M: Karsten Graul +M: Wenjia Zhang L: linux-s390@vger.kernel.org S: Supported W: http://www.ibm.com/developerworks/linux/linux390/ @@ -18671,8 +18873,10 @@ F: sound/soc/ SOUND - SOUND OPEN FIRMWARE (SOF) DRIVERS M: Pierre-Louis Bossart M: Liam Girdwood +M: Peter Ujfalusi +M: Bard Liao M: Ranjani Sridharan -M: Kai Vehmanen +R: Kai Vehmanen M: Daniel Baluta L: sound-open-firmware@alsa-project.org (moderated for non-subscribers) S: Supported @@ -19151,7 +19355,7 @@ F: arch/x86/boot/video* SWIOTLB SUBSYSTEM M: Christoph Hellwig -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported W: http://git.infradead.org/users/hch/dma-mapping.git T: git git://git.infradead.org/users/hch/dma-mapping.git @@ -19221,7 +19425,7 @@ F: arch/arc/plat-axs10x SYNOPSYS AXS10x RESET CONTROLLER DRIVER M: Eugeniy Paltsev S: Supported -F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt +F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml F: drivers/reset/reset-axs10x.c SYNOPSYS CREG GPIO DRIVER @@ -19289,7 +19493,7 @@ R: Andy Shevchenko R: Mika Westerberg R: Jan Dabros L: linux-i2c@vger.kernel.org -S: Maintained +S: Supported F: drivers/i2c/busses/i2c-designware-* SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER @@ -19754,6 +19958,7 @@ F: Documentation/ABI/testing/sysfs-class-thermal F: Documentation/devicetree/bindings/thermal/ F: Documentation/driver-api/thermal/ F: drivers/thermal/ +F: include/dt-bindings/thermal/ F: include/linux/cpu_cooling.h F: include/linux/thermal.h F: include/uapi/linux/thermal.h @@ -20348,6 +20553,13 @@ F: Documentation/filesystems/ubifs-authentication.rst F: Documentation/filesystems/ubifs.rst F: fs/ubifs/ +UBLK USERSPACE BLOCK DRIVER +M: Ming Lei +L: linux-block@vger.kernel.org +S: Maintained +F: drivers/block/ublk_drv.c +F: include/uapi/linux/ublk_cmd.h + UCLINUX (M68KNOMMU AND COLDFIRE) M: Greg Ungerer L: linux-m68k@lists.linux-m68k.org @@ -20696,6 +20908,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git F: Documentation/devicetree/bindings/usb/ F: Documentation/usb/ F: drivers/usb/ +F: include/dt-bindings/usb/ F: include/linux/usb.h F: include/linux/usb/ @@ -21825,7 +22038,7 @@ XEN SWIOTLB SUBSYSTEM M: Juergen Gross M: Stefano Stabellini L: xen-devel@lists.xenproject.org (moderated for non-subscribers) -L: iommu@lists.linux-foundation.org +L: iommu@lists.linux.dev S: Supported F: arch/x86/xen/*swiotlb* F: drivers/xen/*swiotlb* @@ -21975,7 +22188,7 @@ F: include/linux/yam.h YAMA SECURITY MODULE M: Kees Cook S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git yama/tip +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening F: Documentation/admin-guide/LSM/Yama.rst F: security/yama/ diff --git a/Makefile b/Makefile index c43d825..1a0d25f 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 19 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = NAME = Superb Owl # *DOCUMENTATION* @@ -788,6 +788,7 @@ stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG) := -fstack-protector-strong KBUILD_CFLAGS += $(stackp-flags-y) KBUILD_CFLAGS-$(CONFIG_WERROR) += -Werror +KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds KBUILD_CFLAGS += $(KBUILD_CFLAGS-y) $(CONFIG_CC_IMPLICIT_FALLTHROUGH) ifdef CONFIG_CC_IS_CLANG @@ -805,6 +806,9 @@ endif KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) +# These result in bogus false positives +KBUILD_CFLAGS += $(call cc-disable-warning, dangling-pointer) + ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else @@ -1093,6 +1097,7 @@ export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps ifeq ($(KBUILD_EXTMOD),) core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ core-$(CONFIG_BLOCK) += block/ +core-$(CONFIG_IO_URING) += io_uring/ vmlinux-dirs := $(patsubst %/,%,$(filter %/, \ $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ @@ -1137,7 +1142,7 @@ KBUILD_MODULES := 1 autoksyms_recursive: descend modules.order $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \ - "$(MAKE) -f $(srctree)/Makefile vmlinux" + "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive" endif autoksyms_h := $(if $(CONFIG_TRIM_UNUSED_KSYMS), include/generated/autoksyms.h) diff --git a/arch/Kconfig b/arch/Kconfig index fcf9a41..5ea3e38 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -223,6 +223,9 @@ config HAVE_FUNCTION_DESCRIPTORS config TRACE_IRQFLAGS_SUPPORT bool +config TRACE_IRQFLAGS_NMI_SUPPORT + bool + # # An arch should select this if it provides all these things: # @@ -438,6 +441,13 @@ config MMU_GATHER_PAGE_SIZE config MMU_GATHER_NO_RANGE bool + select MMU_GATHER_MERGE_VMAS + +config MMU_GATHER_NO_FLUSH_CACHE + bool + +config MMU_GATHER_MERGE_VMAS + bool config MMU_GATHER_NO_GATHER bool diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index f6d2946..15f2eff 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -60,7 +60,7 @@ int irq_select_affinity(unsigned int irq) cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0); last_cpu = cpu; - cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu)); + irq_data_update_affinity(data, cpumask_of(cpu)); chip->irq_set_affinity(data, cpumask_of(cpu), false); return 0; } diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c index b8600dc..70b74a5 100644 --- a/arch/arc/kernel/jump_label.c +++ b/arch/arc/kernel/jump_label.c @@ -96,19 +96,6 @@ void arch_jump_label_transform(struct jump_entry *entry, flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE); } -void arch_jump_label_transform_static(struct jump_entry *entry, - enum jump_label_type type) -{ - /* - * We use only one NOP type (1x, 4 byte) in arch_static_branch, so - * there's no need to patch an identical NOP over the top of it here. - * The generic code calls 'arch_jump_label_transform' if the NOP needs - * to be replaced by a branch, so 'arch_jump_label_transform_static' is - * never called with type other than JUMP_LABEL_NOP. - */ - BUG_ON(type != JUMP_LABEL_NOP); -} - #ifdef CONFIG_ARC_DBG_JUMP_LABEL #define SELFTEST_MSG "ARC: instruction generation self-test: " diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7630ba9..4055966 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -350,6 +350,7 @@ config ARCH_MULTIPLATFORM config ARCH_FOOTBRIDGE bool "FootBridge" depends on CPU_LITTLE_ENDIAN + depends on ATAGS select CPU_SA110 select FOOTBRIDGE select NEED_MACH_MEMORY_H @@ -361,6 +362,7 @@ config ARCH_RPC bool "RiscPC" depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 depends on CPU_LITTLE_ENDIAN + depends on ATAGS select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE @@ -380,6 +382,7 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" depends on CPU_LITTLE_ENDIAN + depends on ATAGS select ARCH_MTD_XIP select ARCH_SPARSEMEM_ENABLE select CLKSRC_MMIO @@ -588,6 +591,8 @@ source "arch/arm/mach-sti/Kconfig" source "arch/arm/mach-stm32/Kconfig" +source "arch/arm/mach-sunplus/Kconfig" + source "arch/arm/mach-sunxi/Kconfig" source "arch/arm/mach-tegra/Kconfig" @@ -1539,14 +1544,26 @@ config USE_OF Include support for flattened device tree machine descriptions. config ATAGS - bool "Support for the traditional ATAGS boot data passing" if USE_OF + bool "Support for the traditional ATAGS boot data passing" default y help This is the traditional way of passing data to the kernel at boot time. If you are solely relying on the flattened device tree (or the ARM_ATAG_DTB_COMPAT option) then you may unselect this option - to remove ATAGS support from your kernel binary. If unsure, - leave this to y. + to remove ATAGS support from your kernel binary. + +config UNUSED_BOARD_FILES + bool "Board support for machines without known users" + depends on ATAGS + help + Most ATAGS based board files are completely unused and are + scheduled for removal in early 2023, and left out of kernels + by default now. If you are using a board file that is marked + as unused, turn on this option to build support into the kernel. + + To keep support for your individual board from being removed, + send a reply to the email discussion at + https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/ config DEPRECATED_PARAM_STRUCT bool "Provide old way to pass kernel parameters" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9b0aa48..792796a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -271,7 +271,7 @@ choice config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" - depends on ARCH_BCM_63XX + depends on ARCH_BCMBCA config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c8e3633..56f655d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -215,6 +215,7 @@ machine-$(CONFIG_ARCH_RENESAS) += shmobile machine-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti machine-$(CONFIG_ARCH_STM32) += stm32 +machine-$(CONFIG_ARCH_SUNPLUS) += sunplus machine-$(CONFIG_ARCH_SUNXI) += sunxi machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U8500) += ux500 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1848998..05d8aef 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -79,6 +79,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-vinco.dtb dtb-$(CONFIG_SOC_SAMA7G5) += \ at91-sama7g5ek.dtb +dtb-$(CONFIG_SOC_SP7021) += \ + sunplus-sp7021-demo-v3.dtb dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ @@ -135,6 +137,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ bcm47094-phicomm-k3.dtb \ + bcm53015-meraki-mr26.dtb \ bcm53016-meraki-mr32.dtb \ bcm94708.dtb \ bcm94709.dtb \ @@ -146,8 +149,6 @@ dtb-$(CONFIG_ARCH_BCM_53573) += \ bcm47189-luxul-xap-810.dtb \ bcm47189-tenda-ac9.dtb \ bcm947189acdbmr.dtb -dtb-$(CONFIG_ARCH_BCM_63XX) += \ - bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm911360_entphn.dtb \ bcm911360k.dtb \ @@ -182,7 +183,15 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb dtb-$(CONFIG_ARCH_BCMBCA) += \ - bcm947622.dtb + bcm947622.dtb \ + bcm963138.dtb \ + bcm963138dvt.dtb \ + bcm963148.dtb \ + bcm963178.dtb \ + bcm96756.dtb \ + bcm96846.dtb \ + bcm96855.dtb \ + bcm96878.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ @@ -550,6 +559,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ + imx6q-apalis-ixora-v1.2.dtb \ imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-b450v3.dtb \ @@ -741,8 +751,12 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-aster.dtb \ imx7d-colibri-emmc-aster.dtb \ + imx7d-colibri-emmc-iris.dtb \ + imx7d-colibri-emmc-iris-v2.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ + imx7d-colibri-iris.dtb \ + imx7d-colibri-iris-v2.dtb \ imx7d-flex-concentrator.dtb \ imx7d-flex-concentrator-mfg.dtb \ imx7d-mba7.dtb \ @@ -762,6 +776,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-zii-rpu2.dtb \ imx7s-colibri-aster.dtb \ imx7s-colibri-eval-v3.dtb \ + imx7s-colibri-iris.dtb \ + imx7s-colibri-iris-v2.dtb \ imx7s-mba7.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_IMX7ULP) += \ @@ -770,9 +786,10 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ dtb-$(CONFIG_SOC_IMXRT) += \ imxrt1050-evk.dtb dtb-$(CONFIG_SOC_LAN966) += \ - lan966x-pcb8291.dtb \ lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ - lan966x-kontron-kswitch-d10-mmt-8g.dtb + lan966x-kontron-kswitch-d10-mmt-8g.dtb \ + lan966x-pcb8291.dtb \ + lan966x-pcb8309.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-iot.dtb \ ls1021a-moxa-uc-8410a.dtb \ @@ -1148,7 +1165,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ - socfpga_arria10_mercury_aa1.dtb \ + socfpga_arria10_chameleonv3.dtb \ socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ @@ -1192,6 +1209,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp151a-prtt1c.dtb \ stm32mp151a-prtt1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ + stm32mp153c-dhcor-drc-compact.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ @@ -1558,7 +1576,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2600-evb.dtb \ aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-ampere-mtjade.dtb \ - aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-asrock-romed8hm3.dtb \ @@ -1586,7 +1603,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr630.dtb \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ - aspeed-bmc-nuvia-dc-scm.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ aspeed-bmc-opp-mowgli.dtb \ @@ -1599,6 +1615,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \ + aspeed-bmc-qcom-dc-scm-v1.dtb \ aspeed-bmc-quanta-q71l.dtb \ aspeed-bmc-quanta-s6q.dtb \ aspeed-bmc-supermicro-x11spi.dtb \ diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi index 3b0675a..4be9887 100644 --- a/arch/arm/boot/dts/alpine.dtsi +++ b/arch/arm/boot/dts/alpine.dtsi @@ -154,7 +154,7 @@ reg = <0x0 0xfbc00000 0x0 0x100000>; interrupt-map-mask = <0xf800 0 0 7>; /* Add legacy interrupts for SATA devices only */ - interrupt-map = <0x4000 0 0 1 &gic 0 43 4>, + interrupt-map = <0x4000 0 0 1 &gic 0 43 4>, <0x4800 0 0 1 &gic 0 44 4>; /* 32 bit non prefetchable memory space */ diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index c72b09a..207d2b6 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -19,7 +19,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio3 9 0>; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 9312197..b956e2f6 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -168,3 +168,7 @@ "NC", "NC"; }; + +&baseboard_eeprom { + vcc-supply = <&ldo4_reg>; +}; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 147c00d..34579e9 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -106,7 +106,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio3 9 0>; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 215f279..d388cff 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -18,7 +18,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - startup-delay-us= <70000>; + startup-delay-us = <70000>; /* WL_EN */ gpio = <&gpio0 26 0>; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index d9f003d..993b134 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -325,7 +325,7 @@ status = "okay"; tlv320aic23: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; }; @@ -491,7 +491,7 @@ status = "okay"; tx-num-evt = <1>; rx-num-evt = <1>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index b9745a2..25c6ac9 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -92,20 +92,18 @@ 0x0201006c>; /* DOWN */ }; - gpio_keys: volume_keys0 { + gpio_keys: volume-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - switch9 { + switch-9 { label = "volume-up"; linux,code = <115>; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; wakeup-source; }; - switch10 { + switch-10 { label = "volume-down"; linux,code = <114>; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index 1a7e187..f635626 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -33,8 +33,6 @@ pinctrl-names = "default"; pinctrl-0 = <&guardian_button_pins>; compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; select-button { label = "guardian-select-button"; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 92a0e98..7b40ca9 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -166,10 +166,8 @@ &buttons { pinctrl-names = "default"; pinctrl-0 = <&push_button_pins>; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "push_button"; linux,code = <0x100>; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi index e7e439a..e0364ad 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -378,10 +378,8 @@ &buttons { pinctrl-names = "default"; pinctrl-0 = <&push_button_pins>; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "push_button"; linux,code = <0x100>; gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 124026f..dae4480 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -54,14 +54,14 @@ pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; - button@0 { + button-0 { label = "home"; linux,code = ; gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; wakeup-source; }; - button@1 { + button-1 { label = "menu"; linux,code = ; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index b5e88e6..8691eec 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -596,24 +596,22 @@ &buttons { pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; - #address-cells = <1>; - #size-cells = <0>; - button0 { + button-0 { label = "home"; linux,code = ; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; wakeup-source; }; - button1 { + button-1 { label = "menu"; linux,code = ; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; wakeup-source; }; - buttons2 { + button-2 { label = "power"; linux,code = ; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts index 246a1a9..a2676d1 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts @@ -23,7 +23,7 @@ regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - startup-delay-us= <100000>; + startup-delay-us = <100000>; }; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 6b98775..c497200 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -36,10 +36,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - back_button { + back-button { label = "Back Button"; gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; linux,code = ; @@ -47,7 +47,7 @@ wakeup-source; }; - front_button { + front-button { label = "Front Button"; gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; linux,code = ; diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi index 7d8f32b..75ad421 100644 --- a/arch/arm/boot/dts/am3517-evm-ui.dtsi +++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi @@ -70,61 +70,61 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - record { + key-record { label = "Record"; /* linux,code = ; */ gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>; }; - play { + key-play { label = "Play"; linux,code = ; gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>; }; - Stop { + key-stop { label = "Stop"; linux,code = ; gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>; }; - fwd { + key-fwd { label = "FWD"; linux,code = ; gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>; }; - rwd { + key-rwd { label = "RWD"; linux,code = ; gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>; }; - shift { + key-shift { label = "Shift"; linux,code = ; gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>; }; - Mode { + key-mode { label = "Mode"; linux,code = ; gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>; }; - Menu { + key-menu { label = "Menu"; linux,code = ; gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>; }; - Up { + key-up { label = "Up"; linux,code = ; gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>; }; - Down { + key-down { label = "Down"; linux,code = ; gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>; @@ -137,14 +137,14 @@ tlv320aic23_1: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; tlv320aic23_2: codec@1b { compatible = "ti,tlv320aic23"; reg = <0x1b>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; }; @@ -154,7 +154,7 @@ tlv320aic23_3: codec@1a { compatible = "ti,tlv320aic23"; reg = <0x1a>; - #sound-dai-cells= <0>; + #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index c8b80f1..35b6530 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -37,55 +37,55 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - user_pb { + button-user { label = "User Push Button"; linux,code = ; gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; }; - user_sw_1 { + switch-1 { label = "User Switch 1"; linux,code = ; gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; }; - user_sw_2 { + switch-2 { label = "User Switch 2"; linux,code = ; gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; }; - user_sw_3 { + switch-3 { label = "User Switch 3"; linux,code = ; gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; }; - user_sw_4 { + switch-4 { label = "User Switch 4"; linux,code = ; gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; }; - user_sw_5 { + switch-5 { label = "User Switch 5"; linux,code = ; gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; }; - user_sw_6 { + switch-6 { label = "User Switch 6"; linux,code = ; gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; }; - user_sw_7 { + switch-7 { label = "User Switch 7"; linux,code = ; gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; }; - user_sw_8 { + switch-8 { label = "User Switch 8"; linux,code = ; gpios = <&tca6416 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index c9323d1..d039af8 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -213,7 +213,7 @@ u48: pca9575@22 { compatible = "nxp,pca9575"; - reg=<0x22>; + reg = <0x22>; gpio-controller; #gpio-cells = <2>; @@ -232,7 +232,7 @@ u59: pca9575@23 { compatible = "nxp,pca9575"; - reg=<0x23>; + reg = <0x23>; gpio-controller; #gpio-cells = <2>; gpio-line-names = diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 5a74b83..123a95f 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -98,14 +98,12 @@ vin-supply = <&v1_5dreg>; }; - gpio_keys: gpio_keys { + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pins_default>; - #address-cells = <1>; - #size-cells = <0>; - switch0 { + switch-0 { label = "power-button"; linux,code = ; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 8f2268c..415210b 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -2407,7 +2407,7 @@ adc { #io-channel-cells = <1>; - compatible ="ti,am4372-adc"; + compatible = "ti,am4372-adc"; }; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 7da718a..29936bf 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -168,26 +168,24 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - keyswitch_in { + key-switch-in { label = "keyswitch_in"; gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; wakeup-source; }; - error_in { + key-error-in { label = "error_in"; gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; wakeup-source; }; - btn { + key-s { label = "btn"; gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts index 1a4a09b..84d40e1 100644 --- a/arch/arm/boot/dts/armada-370-c200-v2.dts +++ b/arch/arm/boot/dts/armada-370-c200-v2.dts @@ -75,25 +75,25 @@ pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = ; gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; }; - reset { + button-reset { label = "Reset Button"; linux,code = ; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; - usb1 { + button-usb1 { label = "USB1 Button"; linux,code = ; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; - usb2 { + button-usb2 { label = "USB2 Button"; linux,code = ; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index c910d15..6ba7699 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -84,8 +84,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; button { label = "Software Button"; linux,code = ; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi index b52634e..866b863 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -108,22 +108,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power button"; linux,code = ; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - backup { + button-backup { label = "Backup button"; linux,code = ; gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - reset { + button-reset { label = "Reset Button"; linux,code = ; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index 0abac5ff..702a85a 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -83,22 +83,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power button"; linux,code = ; gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; debounce-interval = <100>; }; - reset { + button-reset { label = "Reset Button"; linux,code = ; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button { + button-usb { label = "USB VBUS error"; linux,code = ; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 3961720..095df55 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -24,7 +24,7 @@ pinctrl-0 = <&front_button_pins>; pinctrl-names = "default"; - factory_default { + key-factory-default { label = "Factory Default"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi index 10ad46f..d1452a0 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi @@ -256,14 +256,14 @@ pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { label = "Rear Button"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; linux,can-disable; linux,code = ; }; - button_1 { + button-1 { label = "Front Button"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,can-disable; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index fb9c8a0..116aca5 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -53,13 +53,13 @@ pinctrl-0 = <&gpio_keys_pins>; pinctrl-names = "default"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Factory Reset Button"; linux,code = ; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index f4878df..d1e0db6 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -191,15 +191,13 @@ reg = <0x2b>; #address-cells = <1>; #size-cells = <0>; + status = "okay"; /* * LEDs are controlled by MCU (STM32F0) at * address 0x2b. * - * The driver does not support HW control mode - * for the LEDs yet. Disable the LEDs for now. - * - * Also LED functions are not stable yet: + * LED functions are not stable yet: * - there are 3 LEDs connected via MCU to PCIe * ports. One of these ports supports mSATA. * There is no mSATA nor PCIe function. @@ -210,7 +208,6 @@ * B. Again there is no such function defined. * For now we use LED_FUNCTION_INDICATOR */ - status = "disabled"; multi-led@0 { reg = <0x0>; @@ -397,7 +394,8 @@ phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - marvell,reg-init = <3 18 0 0x4985>; + marvell,reg-init = <3 18 0 0x4985>, + <3 16 0xfff0 0x0001>; /* irq is connected to &pcawan pin 7 */ }; diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts index 53b4bd3..f7daa3b 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-base.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -19,7 +19,7 @@ pinctrl-0 = <&rear_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear SW3 button */ label = "Rear Button"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 4140a53..9529916 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -35,7 +35,7 @@ pinctrl-0 = <&rear_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear SW3 button */ label = "Rear Button"; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 3e77b43..5a74197 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -69,14 +69,12 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - reset { + button-reset { label = "Factory Reset Button"; linux,code = ; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 36932e3..622ac40 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -172,20 +172,18 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Factory Reset Button"; linux,code = ; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 0efcc16..1ecf72a 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -97,12 +97,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - init { + button-init { label = "Init Button"; linux,code = ; gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 1d24b39..a497dd1 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -5,7 +5,7 @@ / { model = "AST2500 EVB"; - compatible = "aspeed,ast2500"; + compatible = "aspeed,ast2500-evb", "aspeed,ast2500"; aliases { serial4 = &uart5; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts index dd71480..d0a5c2f 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts @@ -5,6 +5,7 @@ / { model = "AST2600 A1 EVB"; + compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; /delete-node/regulator-vcc-sdhci0; /delete-node/regulator-vcc-sdhci1; diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 5a6063b..c698e65 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -8,7 +8,7 @@ / { model = "AST2600 EVB"; - compatible = "aspeed,ast2600"; + compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600"; aliases { serial4 = &uart5; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 1b2e7ad..82a6f14 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -100,91 +100,91 @@ gpio-keys { compatible = "gpio-keys"; - shutdown_ack { + event-shutdown-ack { label = "SHUTDOWN_ACK"; gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - reboot_ack { + event-reboot-ack { label = "REBOOT_ACK"; gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; linux,code = ; }; - S0_overtemp { + event-s0-overtemp { label = "S0_OVERTEMP"; gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; linux,code = ; }; - S0_hightemp { + event-s0-hightemp { label = "S0_HIGHTEMP"; gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; linux,code = ; }; - S0_cpu_fault { + event-s0-cpu-fault { label = "S0_CPU_FAULT"; gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; linux,code = ; }; - S0_scp_auth_fail { + event-s0-scp-auth-fail { label = "S0_SCP_AUTH_FAIL"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - S1_scp_auth_fail { + event-s1-scp-auth-fail { label = "S1_SCP_AUTH_FAIL"; gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>; linux,code = ; }; - S1_overtemp { + event-s1-overtemp { label = "S1_OVERTEMP"; gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; linux,code = ; }; - S1_hightemp { + event-s1-hightemp { label = "S1_HIGHTEMP"; gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; linux,code = ; }; - S1_cpu_fault { + event-s1-cpu-fault { label = "S1_CPU_FAULT"; gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; linux,code = ; }; - id_button { + event-id { label = "ID_BUTTON"; gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; linux,code = ; }; - psu1_vin_good { + event-psu1-vin-good { label = "PSU1_VIN_GOOD"; gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; linux,code = ; }; - psu2_vin_good { + event-psu2-vin-good { label = "PSU2_VIN_GOOD"; gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>; linux,code = ; }; - psu1_present { + event-psu1-present { label = "PSU1_PRESENT"; gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; linux,code = ; }; - psu2_present { + event-psu2-present { label = "PSU2_PRESENT"; gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts deleted file mode 100644 index 3395de96e..0000000 --- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts +++ /dev/null @@ -1,225 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/dts-v1/; - -#include "aspeed-g5.dtsi" -#include - -/ { - model = "Qualcomm Centriq 2400 REP AST2520"; - compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500"; - - chosen { - stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlycon"; - }; - - memory@80000000 { - reg = <0x80000000 0x40000000>; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, - <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>; - }; - - iio-hwmon-battery { - compatible = "iio-hwmon"; - io-channels = <&adc 7>; - }; - - leds { - compatible = "gpio-leds"; - - uid_led { - label = "UID_LED"; - gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; - }; - - ras_error_led { - label = "RAS_ERROR_LED"; - gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; - }; - - system_fault { - label = "System_fault"; - gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; - }; - }; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "openbmc-flash-layout.dtsi" - }; -}; - -&spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_default>; - flash@0 { - status = "okay"; - }; -}; - -&spi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi2ck_default - &pinctrl_spi2miso_default - &pinctrl_spi2mosi_default - &pinctrl_spi2cs0_default>; -}; - -&uart3 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; - current-speed = <115200>; -}; - -&uart5 { - status = "okay"; -}; - -&mac0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - tmp421@1e { - compatible = "ti,tmp421"; - reg = <0x1e>; - }; - tmp421@2a { - compatible = "ti,tmp421"; - reg = <0x2a>; - }; - tmp421@4e { - compatible = "ti,tmp421"; - reg = <0x4e>; - }; - tmp421@1c { - compatible = "ti,tmp421"; - reg = <0x1c>; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; - - tmp421@1d { - compatible = "ti,tmp421"; - reg = <0x1d>; - }; - tmp421@1f { - compatible = "ti,tmp421"; - reg = <0x1f>; - }; - tmp421@4d { - compatible = "ti,tmp421"; - reg = <0x4d>; - }; - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - nvt210@4c { - compatible = "nvt210"; - reg = <0x4c>; - }; - eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - pagesize = <128>; - }; -}; - -&i2c7 { - status = "okay"; -}; - -&i2c8 { - status = "okay"; - - pca9641@70 { - compatible = "nxp,pca9641"; - reg = <0x70>; - i2c-arb { - #address-cells = <1>; - #size-cells = <0>; - tmp421@1d { - compatible = "tmp421"; - reg = <0x1d>; - }; - adm1278@12 { - compatible = "adi,adm1278"; - reg = <0x12>; - Rsense = <500>; - }; - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - ds1100@58 { - compatible = "ds1100"; - reg = <0x58>; - }; - }; - }; -}; - -&i2c9 { - status = "okay"; -}; - -&vuart { - status = "okay"; -}; - -&gfx { - status = "okay"; -}; - -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -&gpio { - pin_gpio_c7 { - gpio-hog; - gpios = ; - output; - line-name = "BIOS_SPI_MUX_S"; - }; -}; diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts index 0d1fb5c..f75cad4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -100,7 +100,7 @@ gpio-keys { compatible = "gpio-keys"; - burn-in-signal { + event-burn-in-signal { label = "burn-in"; gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; linux,code = ; @@ -111,139 +111,139 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - rear-riser1-presence { + event-rear-riser1-presence { label = "rear-riser1-presence"; gpios = <&pca0 1 GPIO_ACTIVE_LOW>; linux,code = <1>; }; - alrt-pvddq-cpu0 { + event-alrt-pvddq-cpu0 { label = "alrt-pvddq-cpu0"; gpios = <&pca0 8 GPIO_ACTIVE_LOW>; linux,code = <2>; }; - rear-riser0-presence { + event-rear-riser0-presence { label = "rear-riser0-presence"; gpios = <&pca0 9 GPIO_ACTIVE_LOW>; linux,code = <3>; }; - fault-pvddq-cpu0 { + event-fault-pvddq-cpu0 { label = "fault-pvddq-cpu0"; gpios = <&pca0 10 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - alrt-pvddq-cpu1 { + event-alrt-pvddq-cpu1 { label = "alrt-pvddq-cpu1"; gpios = <&pca0 11 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fault-pvddq-cpu1 { + event-fault-pvddq-cpu1 { label = "alrt-pvddq-cpu1"; gpios = <&pca0 12 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fault-pvccin-cpu1 { + event-fault-pvccin-cpu1 { label = "fault-pvccin-cpuq"; gpios = <&pca0 13 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - bmc-rom0-wp { + event-bmc-rom0-wp { label = "bmc-rom0-wp"; gpios = <&pca1 0 GPIO_ACTIVE_LOW>; linux,code = <8>; }; - bmc-rom1-wp { + event-bmc-rom1-wp { label = "bmc-rom1-wp"; gpios = <&pca1 1 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca1 2 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca1 3 GPIO_ACTIVE_LOW>; linux,code = <11>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca1 4 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca1 5 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca1 6 GPIO_ACTIVE_LOW>; linux,code = <14>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca1 7 GPIO_ACTIVE_LOW>; linux,code = <15>; }; - front-bp1-presence { + event-front-bp1-presence { label = "front-bp1-presence"; gpios = <&pca1 8 GPIO_ACTIVE_LOW>; linux,code = <16>; }; - rear-bp-presence { + event-rear-bp-presence { label = "rear-bp-presence"; gpios = <&pca1 9 GPIO_ACTIVE_LOW>; linux,code = <17>; }; - fault-pvccin-cpu0 { + event-fault-pvccin-cpu0 { label = "fault-pvccin-cpu0"; gpios = <&pca1 10 GPIO_ACTIVE_LOW>; linux,code = <18>; }; - alrt-p1v05-pvcc { + event-alrt-p1v05-pvcc { label = "alrt-p1v05-pvcc1"; gpios = <&pca1 11 GPIO_ACTIVE_LOW>; linux,code = <19>; }; - fault-p1v05-pvccio { + event-fault-p1v05-pvccio { label = "alrt-p1v05-pvcc1"; gpios = <&pca1 12 GPIO_ACTIVE_LOW>; linux,code = <20>; }; - alrt-p1v8-pvccio { + event-alrt-p1v8-pvccio { label = "alrt-p1v8-pvccio"; gpios = <&pca1 13 GPIO_ACTIVE_LOW>; linux,code = <21>; }; - fault-p1v8-pvccio { + event-fault-p1v8-pvccio { label = "fault-p1v8-pvccio"; gpios = <&pca1 14 GPIO_ACTIVE_LOW>; linux,code = <22>; }; - front-bp0-presence { + event-front-bp0-presence { label = "front-bp0-presence"; gpios = <&pca1 15 GPIO_ACTIVE_LOW>; linux,code = <23>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index 382da79..a6a2bc3 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -189,29 +189,27 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 15 GPIO_ACTIVE_LOW>; linux,code = <15>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 14 GPIO_ACTIVE_LOW>; linux,code = <14>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 13 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 12 GPIO_ACTIVE_LOW>; linux,code = <12>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 7213434..bf59a99 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -179,41 +179,39 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 8 GPIO_ACTIVE_LOW>; linux,code = <8>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 9 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca0 10 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca0 11 GPIO_ACTIVE_LOW>; linux,code = <11>; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index 60a39ea..208b0f0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -73,19 +73,19 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; linux,code = ; @@ -97,49 +97,49 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca1 0 GPIO_ACTIVE_LOW>; linux,code = <1>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca1 1 GPIO_ACTIVE_LOW>; linux,code = <2>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca1 2 GPIO_ACTIVE_LOW>; linux,code = <3>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca1 3 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca1 4 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca1 5 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan6-presence { + event-fan6-presence { label = "fan6-presence"; gpios = <&pca1 6 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - fan7-presence { + event-fan7-presence { label = "fan7-presence"; gpios = <&pca1 7 GPIO_ACTIVE_LOW>; linux,code = <8>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index a52a289..48776fb 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -92,30 +92,31 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; linux,code = ; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; linux,code = ; }; - id-button { + + button-id { label = "id-button"; gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; linux,code = ; @@ -126,37 +127,37 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; linux,code = <11>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan5-presence { + event-fan5-presence { label = "fan5-presence"; gpios = <&pca9552 14 GPIO_ACTIVE_LOW>; linux,code = <14>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts index 7d38d12..31ff19e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts @@ -46,31 +46,31 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; linux,code = ; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; linux,code = ; }; - id-button { + button-id { label = "id-button"; gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; linux,code = ; @@ -81,31 +81,31 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; linux,code = <9>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; linux,code = <10>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; linux,code = <11>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - fan4-presence { + event-fan4-presence { label = "fan4-presence"; gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; linux,code = <13>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts index 3d4bdad..ac0d666c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -96,7 +96,7 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index cd660c1..45631b4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -73,7 +73,7 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 084f548..893e621 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -87,7 +87,7 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts index 4816486..bbf864f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts @@ -38,37 +38,37 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; linux,code = ; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; linux,code = ; }; - oppanel-presence { + event-oppanel-presence { label = "oppanel-presence"; gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; linux,code = ; }; - opencapi-riser-presence { + event-opencapi-riser-presence { label = "opencapi-riser-presence"; gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; linux,code = ; @@ -84,55 +84,55 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - scm0-presence { + event-scm0-presence { label = "scm0-presence"; gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - scm1-presence { + event-scm1-presence { label = "scm1-presence"; gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - cpu0vrm-presence { + event-cpu0vrm-presence { label = "cpu0vrm-presence"; gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; linux,code = <12>; }; - cpu1vrm-presence { + event-cpu1vrm-presence { label = "cpu1vrm-presence"; gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; linux,code = <13>; }; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 5 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 8 GPIO_ACTIVE_LOW>; linux,code = <8>; }; - fanboost-presence { + event-fanboost-presence { label = "fanboost-presence"; gpios = <&pca0 9 GPIO_ACTIVE_LOW>; linux,code = <9>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 72b7a66..3f6010e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -50,13 +50,13 @@ gpio-keys { compatible = "gpio-keys"; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; linux,code = ; @@ -65,29 +65,27 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 4 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 5 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts index 328ef47..8a7fb55 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts @@ -63,13 +63,13 @@ gpio-keys { compatible = "gpio-keys"; - button_checkstop { + event-checkstop { label = "checkstop"; linux,code = <74>; gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; }; - button_identify { + event-identify { label = "identify"; linux,code = <152>; gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 230f358..a20a532 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -51,25 +51,25 @@ gpio-keys { compatible = "gpio-keys"; - air-water { + event-air-water { label = "air-water"; gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; linux,code = ; }; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps0-presence { + event-ps0-presence { label = "ps0-presence"; gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; linux,code = ; }; - ps1-presence { + event-ps1-presence { label = "ps1-presence"; gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; linux,code = ; @@ -85,25 +85,25 @@ compatible = "gpio-keys-polled"; poll-interval = <1000>; - fan0-presence { + event-fan0-presence { label = "fan0-presence"; gpios = <&pca0 4 GPIO_ACTIVE_LOW>; linux,code = <4>; }; - fan1-presence { + event-fan1-presence { label = "fan1-presence"; gpios = <&pca0 5 GPIO_ACTIVE_LOW>; linux,code = <5>; }; - fan2-presence { + event-fan2-presence { label = "fan2-presence"; gpios = <&pca0 6 GPIO_ACTIVE_LOW>; linux,code = <6>; }; - fan3-presence { + event-fan3-presence { label = "fan3-presence"; gpios = <&pca0 7 GPIO_ACTIVE_LOW>; linux,code = <7>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index 7ae4ea0..0cb7b20 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -58,13 +58,13 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { + event-checkstop { label = "checkstop"; gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; linux,code = ; }; - pcie-e2b-present{ + event-pcie-e2b-present{ label = "pcie-e2b-present"; gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 61bc74b..a5e64cc 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -24,17 +24,17 @@ leds { compatible = "gpio-leds"; postcode0 { - label="BMC_UP"; + label = "BMC_UP"; gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; default-state = "on"; }; postcode1 { - label="BMC_HB"; + label = "BMC_HB"; gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; postcode2 { - label="FAULT"; + label = "FAULT"; gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; // postcode3-7 are GPIOH3-H7 diff --git a/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts similarity index 97% rename from arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts rename to arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts index f4a97cf..259ef3f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts @@ -6,8 +6,8 @@ #include "aspeed-g6.dtsi" / { - model = "Nuvia DC-SCM BMC"; - compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600"; + model = "Qualcomm DC-SCM V1 BMC"; + compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600"; aliases { serial4 = &uart5; diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts index 69e1bd2..46cbba6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts +++ b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts @@ -65,19 +65,19 @@ compatible = "gpio-leds"; BMC_HEARTBEAT_N { - label="BMC_HEARTBEAT_N"; + label = "BMC_HEARTBEAT_N"; gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; BMC_LED_STATUS_AMBER_N { - label="BMC_LED_STATUS_AMBER_N"; + label = "BMC_LED_STATUS_AMBER_N"; gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>; default-state = "off"; }; FM_ID_LED_N { - label="FM_ID_LED_N"; + label = "FM_ID_LED_N"; gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; default-state = "off"; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index 7edf057..9dfd5de 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -155,10 +155,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - btn { + button { label = "Button"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <0x103>; diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts index 5a81cab..2c718cf 100644 --- a/arch/arm/boot/dts/at91-gatwick.dts +++ b/arch/arm/boot/dts/at91-gatwick.dts @@ -13,7 +13,7 @@ model = "Laird Workgroup Bridge 50N - Project Gatwick"; compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; autorepeat; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 3b8812f..307663b 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -28,19 +28,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - reset { + button-reset { label = "PB_RST"; gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; wakeup-source; }; - user { + button-user { label = "PB_USER"; gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi index c08834dd..e5e21df 100644 --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -31,26 +31,24 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - prog { + button-prog { label = "PB_PROG"; gpios = <&pioE 27 GPIO_ACTIVE_LOW>; linux,code = <0x102>; wakeup-source; }; - reset { + button-reset { label = "PB_RST"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x100>; wakeup-source; }; - user { + button-user { label = "PB_USER"; gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts index 2799b2a..7075df65 100644 --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -55,7 +55,7 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default" , "default", "default", "default", "default" ; @@ -68,35 +68,35 @@ &pinctrl_pio_zbe_rst>; pinctrl-4 = <&pinctrl_pio_input>; - SW1 { + switch-1 { label = "SW1"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; linux,code = <0x101>; wakeup-source; }; - SW2 { + switch-2 { label = "SW2"; gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; linux,code = <0x102>; wakeup-source; }; - SW3 { + switch-3 { label = "SW3"; gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; linux,code = <0x103>; wakeup-source; }; - SW7 { + switch-7 { label = "SW7"; gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; linux,code = <0x107>; wakeup-source; }; - SW8 { + switch-8 { label = "SW8"; gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; linux,code = <0x108>; @@ -186,7 +186,7 @@ &pioA { pinctrl_key_gpio_default: key_gpio_default { - pinmux= , + pinmux = , , , , diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi index 9c62289..42640fe 100644 --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi @@ -36,17 +36,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - prog { + key-prog { label = "PB_PROG"; gpios = <&pioC 17 GPIO_ACTIVE_LOW>; linux,code = <0x102>; wakeup-source; }; - reset { + key-reset { label = "PB_RST"; gpios = <&pioC 16 GPIO_ACTIVE_LOW>; linux,code = <0x100>; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index 4f12347..f71377c 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -18,7 +18,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "Wakeup"; linux,code = <10>; wakeup-source; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index 969d990..9d26f99 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -198,10 +198,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - user_pb { + button-user { label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 7719ea3..81c38e1 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -76,16 +76,15 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - status = "okay"; - sw1 { + button-1 { label = "SW1"; gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - linux,code=; + linux,code = ; wakeup-source; }; }; @@ -233,10 +232,9 @@ status = "okay"; eeprom@53 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; - size = <128>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index a4623cc..8aa9e8d 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -15,7 +15,7 @@ compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; aliases { - i2c0 = &i2c0; + i2c0 = &i2c0; }; clocks { @@ -83,6 +83,8 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; ethernet-phy@7 { diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 08f0d4b..0dc6ca3 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -21,8 +21,8 @@ serial0 = &uart1; /* DBGU */ serial1 = &uart4; /* mikro BUS 1 */ serial2 = &uart2; /* mikro BUS 2 */ - i2c1 = &i2c1; - i2c2 = &i2c3; + i2c1 = &i2c1; + i2c2 = &i2c3; }; chosen { @@ -478,13 +478,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - pb4 { + button { label = "USER"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index ba62178..76b2025 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -194,6 +194,8 @@ &macb0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; ethernet-phy@0 { diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 5e8755f..b665ddc 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -19,21 +19,20 @@ serial1 = &uart6; /* BT */ serial2 = &uart5; /* mikro BUS 2 */ serial3 = &uart3; /* mikro BUS 1 */ - i2c1 = &i2c1; + i2c1 = &i2c1; }; chosen { stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - status = "okay"; - sw4 { + button-1 { label = "USER BUTTON"; gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 806eb1d..6865be8 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -24,8 +24,8 @@ serial1 = &uart1; /* mikro BUS 3 */ serial3 = &uart3; /* mikro BUS 2 */ serial5 = &uart7; /* flx2 */ - i2c0 = &i2c0; - i2c1 = &i2c1; + i2c0 = &i2c0; + i2c1 = &i2c1; }; chosen { @@ -42,14 +42,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - status = "okay"; - sw4 { + button-1 { label = "USER_PB1"; gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; linux,code = ; @@ -329,21 +328,21 @@ status = "okay"; eeprom@50 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; status = "okay"; }; eeprom@52 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; status = "disabled"; }; eeprom@53 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 8ed58af..76a711b 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -20,9 +20,9 @@ aliases { serial0 = &uart0; /* DBGU */ - i2c0 = &i2c0; /* mikroBUS 1 */ - i2c1 = &i2c1; /* XPRO EXT1 */ - i2c2 = &i2c2; + i2c0 = &i2c0; /* mikroBUS 1 */ + i2c1 = &i2c1; /* XPRO EXT1 */ + i2c2 = &i2c2; }; chosen { @@ -139,6 +139,8 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; status = "okay"; @@ -394,13 +396,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button-1 { label = "PB_USER"; gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index cdfe891..85949c24b 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -147,6 +147,8 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; + #address-cells = <1>; + #size-cells = <0>; phy-mode = "rmii"; status = "okay"; @@ -205,10 +207,10 @@ regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-min-microvolt=<1400000>; - regulator-suspend-max-microvolt=<1400000>; + regulator-suspend-min-microvolt = <1400000>; + regulator-suspend-max-microvolt = <1400000>; regulator-changeable-in-suspend; - regulator-mode=; + regulator-mode = ; }; }; @@ -703,13 +705,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button { label = "PB_USER"; gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts index 443e8b0..14af1fd 100644 --- a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts +++ b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts @@ -120,26 +120,31 @@ port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; }; port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; }; port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; }; port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; }; port@4 { reg = <4>; label = "lan5"; + phy-mode = "internal"; }; port@5 { diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index a49c296..1f42a6a 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -372,13 +372,13 @@ regulator-always-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; - bp3 { + button { label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index e519d27..f122f30 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -242,13 +242,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; - pb_user1 { + button { label = "pb_user1"; gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; linux,code = ; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 7017f62..fce4e93 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -269,13 +269,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio>; - pb_user1 { + button { label = "pb_user1"; gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 10354462..de44da2 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -45,13 +45,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button { label = "PB_USER"; gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts index 54d130c..ef73f72 100644 --- a/arch/arm/boot/dts/at91-wb45n.dts +++ b/arch/arm/boot/dts/at91-wb45n.dts @@ -12,13 +12,10 @@ model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - irqbtn@18 { - reg = <18>; + button { label = "IRQBTN"; linux,code = <99>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts index 89f0f71..ec2becf 100644 --- a/arch/arm/boot/dts/at91-wb50n.dts +++ b/arch/arm/boot/dts/at91-wb50n.dts @@ -13,21 +13,17 @@ model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - btn0@10 { - reg = <10>; + button-0 { label = "BTNESC"; linux,code = <1>; /* ESC button */ gpios = <&pioA 10 GPIO_ACTIVE_LOW>; wakeup-source; }; - irqbtn@31 { - reg = <31>; + button-1 { label = "IRQBTN"; linux,code = <99>; /* SysReq button */ gpios = <&pioE 31 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 7368347..9d9820d 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -123,7 +123,7 @@ clock-names = "slow_xtal", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 6381088..bb72f05 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -144,17 +144,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - btn3 { + button-3 { label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; wakeup-source; }; - btn4 { + button-4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 7adc36c..259aca5 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -603,7 +603,7 @@ clock-names = "slow_xtal", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&slow_xtal>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 6fb4fe4..88869ca 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -211,31 +211,31 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - button_0 { + button-0 { label = "button_0"; gpios = <&pioA 27 GPIO_ACTIVE_LOW>; linux,code = <256>; wakeup-source; }; - button_1 { + button-1 { label = "button_1"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <257>; wakeup-source; }; - button_2 { + button-2 { label = "button_2"; gpios = <&pioA 25 GPIO_ACTIVE_LOW>; linux,code = <258>; wakeup-source; }; - button_3 { + button-3 { label = "button_3"; gpios = <&pioA 24 GPIO_ACTIVE_LOW>; linux,code = <259>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index fe45d96..c080df8 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -151,7 +151,7 @@ clock-names = "t0_clk", "slow_clk"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&slow_xtal>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index e732565..ce8baff 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -232,17 +232,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - left_click { + button-left-click { label = "left_click"; gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; wakeup-source; }; - right_click { + button-right-click { label = "right_click"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 85c17dd..60d6129 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -234,17 +234,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - btn3 { + button-3 { label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; wakeup-source; }; - btn4 { + button-4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts index 7da70ae..92f2c05 100644 --- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts +++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts @@ -23,7 +23,7 @@ gpio-keys { compatible = "gpio-keys"; - user_btn1 { + button { label = "USER_BTN1"; gpios = <&pioA 24 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 2ab730f..0979456 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -137,7 +137,7 @@ clock-names = "slow_clk", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffd00 0x10>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index e5db198..7f45e81 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -343,48 +343,48 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - left_click { + button-left-click { label = "left_click"; gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; wakeup-source; }; - right_click { + button-right-click { label = "right_click"; gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; wakeup-source; }; - left { + button-left { label = "Joystick Left"; gpios = <&pioB 14 GPIO_ACTIVE_LOW>; linux,code = <105>; }; - right { + button-right { label = "Joystick Right"; gpios = <&pioB 15 GPIO_ACTIVE_LOW>; linux,code = <106>; }; - up { + button-up { label = "Joystick Up"; gpios = <&pioB 16 GPIO_ACTIVE_LOW>; linux,code = <103>; }; - down { + button-down { label = "Joystick Down"; gpios = <&pioB 17 GPIO_ACTIVE_LOW>; linux,code = <108>; }; - enter { + button-enter { label = "Joystick Press"; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 0785389..556f35c 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -126,7 +126,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; }; - rstc@fffffe00 { + reset-controller@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index c905d7b..4c644d4 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -226,10 +226,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - enter { + button-enter { label = "Enter"; gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 730d118..12c6348 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -766,7 +766,7 @@ clock-names = "slow_clk", "main_xtal"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index ddaadfe..a573512 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -248,17 +248,17 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - right_click { + button-right-click { label = "right_click"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,code = <273>; wakeup-source; }; - left_click { + button-left-click { label = "left_click"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,code = <272>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 395e883..ea3b113 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -134,7 +134,7 @@ clock-names = "slow_clk", "main_xtal"; }; - reset_controller: rstc@fffffe00 { + reset_controller: reset-controller@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi index 3bcf4e0..f13ef80 100644 --- a/arch/arm/boot/dts/axm5516-cpus.dtsi +++ b/arch/arm/boot/dts/axm5516-cpus.dtsi @@ -73,7 +73,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x00>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -81,7 +81,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x01>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -89,7 +89,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x02>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -97,7 +97,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x03>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -105,7 +105,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x100>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -113,7 +113,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x101>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -121,7 +121,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x102>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -129,7 +129,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x103>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -137,7 +137,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x200>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -145,7 +145,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x201>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -153,7 +153,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x202>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -161,7 +161,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x203>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -169,7 +169,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x300>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -177,7 +177,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x301>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -185,7 +185,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x302>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; @@ -193,7 +193,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x303>; - clock-frequency= <1400000000>; + clock-frequency = <1400000000>; cpu-release-addr = <0>; // Fixed by the boot loader }; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts index f4d2fc2..c53d9eb 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-400.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts @@ -28,12 +28,12 @@ &expgpio { gpio-line-names = "BT_ON", "WL_ON", - "", + "PWR_LED_OFF", "GLOBAL_RESET", "VDD_SD_IO_SEL", - "CAM_GPIO", + "GLOBAL_SHUTDOWN", "SD_PWR_ON", - "SD_OC_N"; + "SHUTDOWN_REQUEST"; }; &genet_mdio { diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi index ca266c5..98817a6 100644 --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi @@ -69,6 +69,10 @@ }; }; +&v3d { + clocks = <&firmware_clocks 5>; +}; + &vchiq { interrupts = ; }; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 89af574..941c4d1 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -107,12 +107,13 @@ }; pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt"; #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x7e100000 0x114>, <0x7e00a000 0x24>, <0x7ec11000 0x20>; + reg-names = "pm", "asb", "rpivid_asb"; clocks = <&clocks BCM2835_CLOCK_V3D>, <&clocks BCM2835_CLOCK_PERI_IMAGE>, <&clocks BCM2835_CLOCK_H264>, @@ -601,6 +602,17 @@ #size-cells = <0x0>; }; }; + + v3d: gpu@7ec00000 { + compatible = "brcm,2711-v3d"; + reg = <0x0 0x7ec00000 0x4000>, + <0x0 0x7ec04000 0x4000>; + reg-names = "hub", "core0"; + + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + resets = <&pm BCM2835_RESET_V3D>; + interrupts = ; + }; }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index ead6e980..78465ad 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -31,22 +31,22 @@ }; i2c@3e016000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3e017000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3e018000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3500d000 { - status="okay"; + status = "okay"; clock-frequency = <100000>; pmu: pmu@8 { diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index c25e797..a037d2b 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -62,6 +62,7 @@ #reset-cells = <1>; reg = <0x7e100000 0x114>, <0x7e00a000 0x24>; + reg-names = "pm", "asb"; clocks = <&clocks BCM2835_CLOCK_V3D>, <&clocks BCM2835_CLOCK_PERI_IMAGE>, <&clocks BCM2835_CLOCK_H264>, diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index c113661..d2d9c6e 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -50,9 +50,9 @@ trips { cpu-crit { - temperature = <90000>; - hysteresis = <0>; - type = "critical"; + temperature = <90000>; + hysteresis = <0>; + type = "critical"; }; }; @@ -352,8 +352,6 @@ clocks = <&clocks BCM2835_CLOCK_VPU>, <&clocks BCM2835_CLOCK_DPI>; clock-names = "core", "pixel"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 8ed4037..09ee3e4 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -70,19 +70,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 667b118..32619c6 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -54,25 +54,25 @@ gpio-keys { compatible = "gpio-keys"; - brightness { + button-brightness { label = "Backlight"; linux,code = ; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi index d659e40..a658b9b 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -104,33 +104,33 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = ; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = ; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = ; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = ; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index ff31ce4..f8f5345 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -100,33 +100,33 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = ; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = ; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = ; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = ; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 5bac1e1..0ed25bf 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -29,13 +29,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts index cd797b4..f1412ba 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -25,13 +25,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 5b4a481..14ee410 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index c81944c..600ab08 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -52,7 +52,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 43a5d67..fd6d8d2 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -63,19 +63,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 4c60eda..76fc109 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -59,19 +59,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 9ca6d1b..6bcdfb7 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -94,19 +94,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 0e273c5..ca47cc4 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -60,13 +60,13 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index d00495a..0edc254 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -91,26 +91,26 @@ gpio-keys { compatible = "gpio-keys"; - aoss { + button-aoss { label = "AOSS"; linux,code = ; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; /* Switch device mode? */ - mode { + button-mode { label = "Mode"; linux,code = ; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = ; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 8b1a05a..1f0998f 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -96,7 +96,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 68aaf0a..c8c0237 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 9316a36..3b35a7a 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -94,7 +94,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 12e34a0..19a7971 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -77,13 +77,13 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 7546c8d..f52a75c 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -47,16 +47,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index beae9ea..5ff6c58 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -77,42 +77,40 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power"; linux,code = ; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = ; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = ; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = ; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index 7879f7d..99253fd7 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -29,16 +29,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 56d309d..de961fb 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -72,22 +72,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 89f992a..087f7f6 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -99,28 +99,26 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - brightness { + button-brightness { label = "Backlight"; linux,code = ; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index c2a266a..11d1068 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -77,16 +77,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index d850375..a5fec56 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -72,25 +72,25 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = ; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - wifi { + button-wifi { label = "Wi-Fi"; linux,code = ; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; - led { + button-led { label = "Backlight"; linux,code = ; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 60bfd52..2c38b64 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -86,20 +86,20 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; /* Switch: router / extender */ - extender { + button-extender { label = "Extender"; linux,code = ; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 9bef6b9..86c7cc0 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -30,19 +30,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index b51a0ee..9ad15bc 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index 6fa101f..ee24d376 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -43,7 +43,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index b959a95..6549d07 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index b0d8a68..654fcce 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -34,10 +34,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index cbe8c8e..bf053a2 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -89,7 +89,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 9efcb24..78a90dd 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -67,7 +67,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 42097a4..f850dce 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -65,25 +65,25 @@ gpio-keys { compatible = "gpio-keys"; - brightness { + button-brightness { label = "Backlight"; linux,code = ; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts index a2566ad..3bf6e24 100644 --- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts +++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts @@ -22,7 +22,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index 57ca1cf..e20b6d2 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -39,7 +39,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 2e1a7e3..9d86357 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 07eb3a82..55b9264 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -59,19 +59,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = ; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index c016e12..2df0452 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -32,6 +32,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -39,6 +40,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -46,6 +48,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + L2_0: l2-cache0 { compatible = "cache"; }; @@ -76,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -88,23 +92,23 @@ psci { compatible = "arm,psci-0.2"; method = "smc"; - cpu_off = <1>; - cpu_on = <2>; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x81000000 0x818000>; + ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; - #address-cells = <0>; interrupt-controller; + interrupts = ; reg = <0x1000 0x1000>, - <0x2000 0x2000>; + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; }; }; diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts new file mode 100644 index 0000000..14f5803 --- /dev/null +++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR26 / Codename: Venom + * + * Copyright (C) 2022 Christian Lamparter + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include + +/ { + compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708"; + model = "Meraki MR26"; + + memory@0 { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_FAULT; + color = ; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + led-1 { + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + key-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + clock-frequency = <50000000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&nandcs { + nand-ecc-algo = "hw"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x200000>; + read-only; + }; + + partition@200000 { + label = "u-boot-env"; + reg = <0x200000 0x200000>; + /* empty */ + }; + + partition@400000 { + label = "u-boot-backup"; + reg = <0x400000 0x200000>; + /* empty */ + }; + + partition@600000 { + label = "u-boot-env-backup"; + reg = <0x600000 0x200000>; + /* empty */ + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; + duplex-full; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c>; + + clock-frequency = <100000>; + + ina219@40 { + compatible = "ti,ina219"; /* PoE power */ + reg = <0x40>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <32>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + /* it's empty */ + }; +}; + +&thermal { + status = "disabled"; + /* does not work, reads 418 degree Celsius */ +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index daca63f..e678bc0 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -47,10 +47,8 @@ keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 65f8a75..5fc1b84 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -568,9 +568,9 @@ trips { cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; + temperature = <125000>; + hysteresis = <0>; + type = "critical"; }; }; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index cca49a2..b774a8d 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -9,8 +9,8 @@ / { #address-cells = <1>; #size-cells = <1>; - compatible = "brcm,bcm63138"; - model = "Broadcom BCM63138 DSL SoC"; + compatible = "brcm,bcm63138", "brcm,bcmbca"; + model = "Broadcom BCM963138 Reference Board"; interrupt-parent = <&gic>; aliases { diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi new file mode 100644 index 0000000..df5307b --- /dev/null +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include +#include + +/ { + compatible = "brcm,bcm63148", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + B15_0: cpu@0 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B15_1: cpu@1 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + }; + + pmu: pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = , + ; + interrupt-affinity = <&B15_0>, <&B15_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@80030000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80030000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = ; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffe8000 0x8000>; + + uart0: serial@600 { + compatible = "brcm,bcm6345-uart"; + reg = <0x600 0x20>; + interrupts = ; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi new file mode 100644 index 0000000..5463443 --- /dev/null +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include +#include + +/ { + compatible = "brcm,bcm63178", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + ; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi new file mode 100644 index 0000000..ce1b59f --- /dev/null +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include +#include + +/ { + compatible = "brcm,bcm6756", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi new file mode 100644 index 0000000..e610c10 --- /dev/null +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include +#include + +/ { + compatible = "brcm,bcm6846", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + ; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x1b>; + interrupts = ; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi new file mode 100644 index 0000000..620f51a --- /dev/null +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include +#include + +/ { + compatible = "brcm,bcm6855", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + ; + interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi new file mode 100644 index 0000000..a7dff59 --- /dev/null +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include +#include + +/ { + compatible = "brcm,bcm6878", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + ; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = ; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index a76c74b..363009e 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -47,10 +47,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - hook { + button-hook { label = "HOOK"; linux,code = ; gpios = <&gpio_asiu 48 0>; diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts index b0b8c77..16e70a2 100644 --- a/arch/arm/boot/dts/bcm947189acdbmr.dts +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -44,13 +44,13 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; }; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index dd63a14..4fe3b36 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -47,13 +47,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = ; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = ; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi index 58b7d9f..c54451d 100644 --- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi @@ -13,7 +13,7 @@ autorepeat; poll-interval = <20>; - reset { + button-reset { label = "reset"; linux,code = ; gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi index 576cfc5..1830844 100644 --- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi +++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi @@ -14,7 +14,7 @@ autorepeat; poll-interval = <20>; - reset { + button-reset { label = "reset"; linux,code = ; gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts new file mode 100644 index 0000000..d28c4f1 --- /dev/null +++ b/arch/arm/boot/dts/bcm963138.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63138.dtsi" + +/ { + model = "Broadcom BCM963138 Reference Board"; + compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&serial0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index df5c8ab..15bec75 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -8,7 +8,7 @@ #include "bcm63138.dtsi" / { - compatible = "brcm,BCM963138DVT", "brcm,bcm63138"; + compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca"; model = "Broadcom BCM963138DVT"; chosen { diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts new file mode 100644 index 0000000..98f6a6d --- /dev/null +++ b/arch/arm/boot/dts/bcm963148.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63148.dtsi" + +/ { + model = "Broadcom BCM963148 Reference Board"; + compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts new file mode 100644 index 0000000..fa096e9 --- /dev/null +++ b/arch/arm/boot/dts/bcm963178.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63178.dtsi" + +/ { + model = "Broadcom BCM963178 Reference Board"; + compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts new file mode 100644 index 0000000..9a4a87b --- /dev/null +++ b/arch/arm/boot/dts/bcm96756.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6756.dtsi" + +/ { + model = "Broadcom BCM96756 Reference Board"; + compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts new file mode 100644 index 0000000..c70ebcc --- /dev/null +++ b/arch/arm/boot/dts/bcm96846.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6846.dtsi" + +/ { + model = "Broadcom BCM96846 Reference Board"; + compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts new file mode 100644 index 0000000..4438152 --- /dev/null +++ b/arch/arm/boot/dts/bcm96855.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6855.dtsi" + +/ { + model = "Broadcom BCM96855 Reference Board"; + compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts new file mode 100644 index 0000000..8fbc175 --- /dev/null +++ b/arch/arm/boot/dts/bcm96878.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6878.dtsi" + +/ { + model = "Broadcom BCM96878 Reference Board"; + compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index e9aecac..1fdd9a2 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -52,15 +52,15 @@ enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; }; display-timings { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 0386376..e46e4d2 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -419,7 +419,7 @@ edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ - reg = <0x0 0x8000>; + reg = <0x0 0x8000>; reg-names = "edma3_cc"; interrupts = <11 12>; interrupt-names = "edma3_ccint", "edma3_ccerrint"; @@ -430,14 +430,14 @@ }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; - reg = <0x8000 0x400>; + reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; - reg = <0x8400 0x400>; + reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc0 2>; @@ -445,7 +445,7 @@ edma1: edma@230000 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ - reg = <0x230000 0x8000>; + reg = <0x230000 0x8000>; reg-names = "edma3_cc"; interrupts = <93 94>; interrupt-names = "edma3_ccint", "edma3_ccerrint"; @@ -456,7 +456,7 @@ }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; - reg = <0x238000 0x400>; + reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; power-domains = <&psc1 21>; @@ -672,7 +672,7 @@ cppi41dma: dma-controller@201000 { compatible = "ti,da830-cppi41"; - reg = <0x201000 0x1000 + reg = <0x201000 0x1000 0x202000 0x1000 0x204000 0x4000>; reg-names = "controller", diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 8ef48c00f..fe3f9a9 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -51,7 +51,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f2g16aadwp"; + linux,mtd-name = "micron,mt29f2g16aadwp"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 778796c..244a957 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -119,7 +119,7 @@ nand@0,0 { compatible = "ti,omap2-nand"; - linux,mtd-name= "micron,mt29f2g16aadwp"; + linux,mtd-name = "micron,mt29f2g16aadwp"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index c16e183..577114c 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -51,7 +51,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f2g16aadwp"; + linux,mtd-name = "micron,mt29f2g16aadwp"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index bc4ae91..931db79 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -90,8 +90,8 @@ clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; reg = <0x03fc>; - ti,bit-shift=<20>; - ti,latch-bit=<26>; + ti,bit-shift = <20>; + ti,latch-bit = <26>; assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>; assigned-clock-rates = <80000000>; }; @@ -102,7 +102,7 @@ clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>; reg = <0x3fc>; ti,bit-shift = <29>; - ti,latch-bit=<26>; + ti,latch-bit = <26>; assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>; }; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index 1a49f15..935e235 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -22,14 +22,14 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - cover { + key-cover { label = "Cover"; gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi index 156de65..27ef9a6 100644 --- a/arch/arm/boot/dts/e70k02.dtsi +++ b/arch/arm/boot/dts/e70k02.dtsi @@ -26,14 +26,14 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - cover { + key-cover { label = "Cover"; gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; linux,code = ; @@ -41,13 +41,13 @@ wakeup-source; }; - pageup { + key-pageup { label = "PageUp"; gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; linux,code = ; }; - pagedown { + key-pagedown { label = "PageDown"; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index 57a028a..ce5221c 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -9,11 +9,11 @@ }; psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000002>; - cpu_off = <0x84000004>; - cpu_on = <0x84000006>; + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000002>; + cpu_off = <0x84000004>; + cpu_on = <0x84000006>; }; soc { diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts index a8d8bb0..f23a25c 100644 --- a/arch/arm/boot/dts/en7523-evb.dts +++ b/arch/arm/boot/dts/en7523-evb.dts @@ -33,3 +33,11 @@ &gpio1 { status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi index 36597f5..7f83933 100644 --- a/arch/arm/boot/dts/en7523.dtsi +++ b/arch/arm/boot/dts/en7523.dtsi @@ -3,6 +3,7 @@ #include #include #include +#include / { interrupt-parent = <&gic>; @@ -83,6 +84,13 @@ }; }; + scu: system-controller@1fa20000 { + compatible = "airoha,en7523-scu"; + reg = <0x1fa20000 0x400>, + <0x1fb00000 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller@9000000 { compatible = "arm,gic-v3"; interrupt-controller; @@ -135,4 +143,62 @@ gpio-controller; #gpio-cells = <2>; }; + + pcie0: pcie@1fa91000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa91000 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x20000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1fa92000 { + compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0x1fa92000 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&scu EN7523_CLK_PCIE>; + clock-names = "sys_ck1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos-pinctrl.h b/arch/arm/boot/dts/exynos-pinctrl.h new file mode 100644 index 0000000..e3a6df9 --- /dev/null +++ b/arch/arm/boot/dts/exynos-pinctrl.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung Exynos DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski + */ + +#ifndef __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ + +#define EXYNOS_PIN_PULL_NONE 0 +#define EXYNOS_PIN_PULL_DOWN 1 +#define EXYNOS_PIN_PULL_UP 3 + +/* Pin function in power down mode */ +#define EXYNOS_PIN_PDN_OUT0 0 +#define EXYNOS_PIN_PDN_OUT1 1 +#define EXYNOS_PIN_PDN_INPUT 2 +#define EXYNOS_PIN_PDN_PREV 3 + +/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */ +#define EXYNOS4_PIN_DRV_LV1 0 +#define EXYNOS4_PIN_DRV_LV2 2 +#define EXYNOS4_PIN_DRV_LV3 1 +#define EXYNOS4_PIN_DRV_LV4 3 + +/* Drive strengths for Exynos5260 */ +#define EXYNOS5260_PIN_DRV_LV1 0 +#define EXYNOS5260_PIN_DRV_LV2 1 +#define EXYNOS5260_PIN_DRV_LV4 2 +#define EXYNOS5260_PIN_DRV_LV6 3 + +/* + * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except + * GPIO_HSI block) + */ +#define EXYNOS5420_PIN_DRV_LV1 0 +#define EXYNOS5420_PIN_DRV_LV2 1 +#define EXYNOS5420_PIN_DRV_LV3 2 +#define EXYNOS5420_PIN_DRV_LV4 3 + +#define EXYNOS_PIN_FUNC_INPUT 0 +#define EXYNOS_PIN_FUNC_OUTPUT 1 +#define EXYNOS_PIN_FUNC_2 2 +#define EXYNOS_PIN_FUNC_3 3 +#define EXYNOS_PIN_FUNC_4 4 +#define EXYNOS_PIN_FUNC_5 5 +#define EXYNOS_PIN_FUNC_6 6 +#define EXYNOS_PIN_FUNC_EINT 0xf +#define EXYNOS_PIN_FUNC_F EXYNOS_PIN_FUNC_EINT + +#endif /* __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 7b429622..0ac3f28 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -357,7 +357,7 @@ &pinctrl_1 { bten: bten-pins { - samsung,pins ="gpx1-7"; + samsung,pins = "gpx1-7"; samsung,pin-function = ; samsung,pin-pud = ; samsung,pin-con-pdn = ; diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi index cc30d15..011ba2e 100644 --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include +#include "exynos-pinctrl.h" #define PIN_IN(_pin, _pull, _drv) \ pin- ## _pin { \ diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 78dad23..326b9e0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -376,7 +376,7 @@ status = "disabled"; }; - mshc_0: mshc@12510000 { + mshc_0: mmc@12510000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12510000 0x1000>; interrupts = ; @@ -388,7 +388,7 @@ status = "disabled"; }; - mshc_1: mshc@12520000 { + mshc_1: mmc@12520000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12520000 0x1000>; interrupts = ; @@ -400,7 +400,7 @@ status = "disabled"; }; - mshc_2: mshc@12530000 { + mshc_2: mmc@12530000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12530000 0x1000>; interrupts = ; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 6f0ca33..5c4ecda 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -316,7 +316,7 @@ status = "disabled"; }; - sdhci_0: sdhci@12510000 { + sdhci_0: mmc@12510000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; interrupts = ; @@ -325,7 +325,7 @@ status = "disabled"; }; - sdhci_1: sdhci@12520000 { + sdhci_1: mmc@12520000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; interrupts = ; @@ -334,7 +334,7 @@ status = "disabled"; }; - sdhci_2: sdhci@12530000 { + sdhci_2: mmc@12530000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; interrupts = ; @@ -343,7 +343,7 @@ status = "disabled"; }; - sdhci_3: sdhci@12540000 { + sdhci_3: mmc@12540000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 3c0a18b..bba8501 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -89,21 +89,21 @@ gpio-keys { compatible = "gpio-keys"; - vol-down { + key-vol-down { gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = ; label = "volume down"; debounce-interval = <10>; }; - vol-up { + key-vol-up { gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = ; label = "volume up"; debounce-interval = <10>; }; - power { + key-power { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = ; label = "power"; @@ -111,7 +111,7 @@ wakeup-source; }; - ok { + key-ok { gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = ; label = "ok"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index a08ce2f..5f37b75 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -15,6 +15,7 @@ #include "exynos4210.dtsi" #include #include +#include #include "exynos-mfc-reserved-memory.dtsi" / { @@ -46,35 +47,35 @@ gpio-keys { compatible = "gpio-keys"; - up { + key-up { label = "Up"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - down { + key-down { label = "Down"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - back { + key-back { label = "Back"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - home { + key-home { label = "Home"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = ; @@ -86,6 +87,7 @@ compatible = "gpio-leds"; status { gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 6373009..76f44ae 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -11,7 +11,7 @@ * tree nodes are listed in this file. */ -#include +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 01f44d9..b8e9dd2 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -180,7 +180,7 @@ vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; + power-on-delay = <50>; reset-delay = <100>; init-delay = <100>; flip-horizontal; diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 03dffc69..94122e9 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -7,6 +7,7 @@ */ /dts-v1/; +#include #include "exynos4412-midas.dtsi" / { @@ -25,8 +26,9 @@ pinctrl-1 = <&camera_flash_host>; pinctrl-2 = <&camera_flash_isp>; - flash-led { - label = "flash"; + led { + function = LED_FUNCTION_FLASH; + color = ; led-max-microamp = <520833>; flash-max-microamp = <1012500>; flash-max-timeout-us = <1940000>; @@ -107,7 +109,7 @@ vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; + power-on-delay = <50>; reset-delay = <100>; init-delay = <100>; flip-horizontal; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index a940628..202ab0f 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include #include #include #include "exynos4412-itop-scp-core.dtsi" @@ -28,7 +29,8 @@ compatible = "gpio-leds"; led2 { - label = "red:system"; + function = LED_FUNCTION_HEARTBEAT; + color = ; gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "heartbeat"; @@ -36,6 +38,7 @@ led3 { label = "red:user"; + color = ; gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -44,31 +47,31 @@ gpio-keys { compatible = "gpio-keys"; - home { + key-home { label = "GPIO Key Home"; linux,code = ; gpios = <&gpx1 1 GPIO_ACTIVE_LOW>; }; - back { + key-back { label = "GPIO Key Back"; linux,code = ; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; }; - sleep { + key-sleep { label = "GPIO Key Sleep"; linux,code = ; gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; }; - vol-up { + key-vol-up { label = "GPIO Key Vol+"; linux,code = ; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; }; - vol-down { + key-vol-down { label = "GPIO Key Vol-"; linux,code = ; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 23f50c9..b967397 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -12,11 +12,12 @@ /dts-v1/; #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" + #include #include #include #include -#include +#include "exynos-pinctrl.h" / { compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 36c369c..a5ad88b 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include #include "exynos4412-odroid-common.dtsi" #include "exynos4412-prime.dtsi" @@ -37,7 +38,8 @@ leds { compatible = "gpio-leds"; led1 { - label = "led1:heart"; + function = LED_FUNCTION_HEARTBEAT; + color = ; gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 1f17cc3..68d589e 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include #include "exynos4412-odroid-common.dtsi" / { @@ -27,13 +28,15 @@ leds { compatible = "gpio-leds"; led1 { - label = "led1:heart"; + function = LED_FUNCTION_HEARTBEAT; + color = ; gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2:mmc0"; + function = LED_FUNCTION_DISK_ACTIVITY; gpios = <&gpc1 2 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "mmc0"; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 97f131b..7a515b8 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -15,8 +15,8 @@ #include #include #include -#include #include +#include "exynos-pinctrl.h" / { compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; @@ -106,6 +106,16 @@ regulator-always-on; }; + panel_vdd: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "LCD_ENABLE"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable>; + gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + wlan_pwrseq: sdhci3-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>; @@ -216,6 +226,32 @@ monitored-battery = <&battery_cell>; }; }; + + panel { + compatible = "samsung,ltl101al01"; + pinctrl-0 = <&lvds_nshdn>; + pinctrl-names = "default"; + power-supply = <&panel_vdd>; + enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-0 = <&led_bl_reset>; + pinctrl-names = "default"; + enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>; + pwms = <&pwm 1 78770 0>; + brightness-levels = <0 48 128 255>; + num-interpolated-steps = <8>; + default-brightness-level = <12>; + }; }; &adc { @@ -295,22 +331,19 @@ }; &fimd { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-0 = <&lcd_clk &lcd_data24>; pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; - display-timings { - timing0 { - clock-frequency = <66666666>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <18>; - hback-porch = <36>; - hsync-len = <16>; - vback-porch = <16>; - vfront-porch = <4>; - vsync-len = <3>; - hsync-active = <1>; + samsung,invert-vclk; + + port@3 { + reg = <3>; + + fimd_ep: endpoint { + remote-endpoint = <&lcd_ep>; }; }; }; @@ -687,6 +720,12 @@ samsung,pin-pud = ; }; + lcd_enable: lcd-enable-pins { + samsung,pins = "gpc0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + sleep0: sleep-state { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); @@ -809,12 +848,24 @@ /* 0 = CP, 1 = AP (serial output) */ }; + led_bl_reset: led-bl-reset-pins { + samsung,pins = "gpm0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + tsp_rst: tsp-rst-pins { samsung,pins = "gpm0-4"; samsung,pin-function = ; samsung,pin-pud = ; }; + lvds_nshdn: lvds-nshdn-pins { + samsung,pins = "gpm0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + tsp_irq: tsp-irq-pins { samsung,pins = "gpm2-3"; samsung,pin-function = ; @@ -1100,6 +1151,13 @@ assigned-clock-parents = <&clock CLK_XUSBXTI>; }; +&pwm { + pinctrl-0 = <&pwm1_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <1>; + status = "okay"; +}; + &rtc { clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; clock-names = "rtc", "rtc_src"; diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index 88b8afd..58847d4 100644 --- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include +#include "exynos-pinctrl.h" #define PIN_SLP(_pin, _mode, _pull) \ _pin { \ diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 017b261..04388c5 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos4412.dtsi" #include +#include / { model = "FriendlyARM TINY4412 board based on Exynos4412"; @@ -30,6 +31,7 @@ led1 { label = "led1"; + function = LED_FUNCTION_HEARTBEAT; gpios = <&gpm4 0 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "heartbeat"; @@ -49,6 +51,7 @@ led4 { label = "led4"; + function = LED_FUNCTION_DISK_ACTIVITY; gpios = <&gpm4 3 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "mmc0"; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 9ce9fb3..c8da0d4 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -89,7 +89,7 @@ compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10481000 0x1000>, + reg = <0x10481000 0x1000>, <0x10482000 0x2000>, <0x10484000 0x2000>, <0x10486000 0x2000>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index f7795f2..71c0e87 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -30,42 +30,42 @@ gpio-keys { compatible = "gpio-keys"; - menu { + key-menu { label = "SW-TACT2"; gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - home { + key-home { label = "SW-TACT3"; gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - up { + key-up { label = "SW-TACT4"; gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - down { + key-down { label = "SW-TACT5"; gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - back { + key-back { label = "SW-TACT6"; gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - wakeup { + key-wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 918947a..48732ed 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index c15ecfc..3d84b9c 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -32,7 +32,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq &lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 24609bb..5eca10e 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -33,7 +33,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq>, <&lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi index 150607f..43e4a54 100644 --- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index 6c7814b..f7b9233 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -6,7 +6,7 @@ * https://www.hardkernel.com */ -#include +#include "exynos-pinctrl.h" &pinctrl_0 { gpa0: gpa0-gpio-bank { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 946b791..55b7759 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -42,7 +42,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SW-TACT1"; gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index d6434ec..9e21234 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -60,7 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq &lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 546ba27..14cf9c4 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -9,7 +9,7 @@ * tree nodes are listed in this file. */ -#include +#include "exynos-pinctrl.h" &pinctrl_0 { gpy7: gpy7-gpio-bank { diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index d91f7fa..3de7019 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -8,6 +8,7 @@ */ /dts-v1/; +#include #include "exynos5422-odroid-core.dtsi" / { @@ -19,7 +20,8 @@ compatible = "pwm-leds"; led-1 { - label = "blue:heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + color = ; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; max-brightness = <255>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 1c24f9b..f5fb617 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -9,6 +9,7 @@ */ /dts-v1/; +#include #include #include "exynos5422-odroidxu3-common.dtsi" @@ -21,7 +22,8 @@ compatible = "pwm-leds"; led-1 { - label = "blue:heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + color = ; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; max-brightness = <255>; diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi index 982752e..8c0e171 100644 --- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi +++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi @@ -9,6 +9,7 @@ */ #include +#include / { led-controller-1 { @@ -16,6 +17,8 @@ led-1 { label = "green:mmc0"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = ; pwms = <&pwm 1 2000000 0>; pwm-names = "pwm1"; /* @@ -27,7 +30,8 @@ }; led-2 { - label = "blue:heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + color = ; pwms = <&pwm 2 2000000 0>; pwm-names = "pwm2"; max-brightness = <255>; @@ -40,6 +44,8 @@ led-3 { label = "red:microSD"; + function = LED_FUNCTION_DISK_ACTIVITY; + color = ; gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "mmc1"; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 4ee7628..0ebcb66 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -59,7 +59,7 @@ pinctrl-names = "default"; pinctrl-0 = <&power_key_irq &lid_irq>; - power { + power-key { label = "Power"; gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index fa8044c..bc4de0c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -68,7 +68,7 @@ }; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b660c7d..e140307 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -74,14 +74,14 @@ }; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&aitc>; ranges; - aipi@10000000 { /* AIPI1 */ + aipi1: aipi@10000000 { /* AIPI1 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -453,7 +453,7 @@ }; }; - aipi@10020000 { /* AIPI2 */ + aipi2: aipi@10020000 { /* AIPI2 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 2adb923..5c4938b 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -48,7 +48,7 @@ reg = <0x68000000 0x100000>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -63,7 +63,7 @@ ranges = <0 0x1fffc000 0x4000>; }; - bus@43f00000 { /* AIPS1 */ + aips1: bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index be0de0f..c0c7575 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -94,14 +94,14 @@ status = "okay"; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&tzic>; ranges; - bus@50000000 { /* AIPS1 */ + aips1: bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -385,7 +385,7 @@ }; }; - bus@60000000 { /* AIPS2 */ + aips2: bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 85654d6..f740872 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -174,7 +174,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_interrupt_fpga>; interrupt-parent = <&gpio2>; - interrupts= <9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 1e20a663..592d9c2 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -114,7 +114,7 @@ ports = <&ipu_di0>, <&ipu_di1>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -171,7 +171,7 @@ }; }; - bus@70000000 { /* AIPS1 */ + aips1: bus@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -460,7 +460,7 @@ }; }; - bus@80000000 { /* AIPS2 */ + aips2: bus@80000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 67487f3..b7a6469 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -132,7 +132,7 @@ status = "okay"; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -222,7 +222,7 @@ clock-names = "core_clk", "mem_iface_clk"; }; - bus@50000000 { /* AIPS1 */ + aips1: bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -655,7 +655,7 @@ }; }; - bus@60000000 { /* AIPS2 */ + aips2: bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts index c4ce23d..522660c 100644 --- a/arch/arm/boot/dts/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -196,7 +196,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_tsc2046>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index b86deeb..0a0b7ac 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -344,7 +344,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_tsc>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 516ec91..779b528 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -144,7 +144,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_touchscreen>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index fdd81fd..8e0ed20 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -80,7 +80,7 @@ }; }; - soc { + soc: soc { ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index a0683b4..fa160a3 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -30,89 +30,26 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - power-supply = <®_3v3_sw>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; - regulator-name = "pcie_switch"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + enable-active-high; gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "pcie_switch"; startup-delay-us = <100000>; - enable-active-high; status = "okay"; }; reg_3v3_sw: regulator-3v3-sw { compatible = "regulator-fixed"; - regulator-name = "3.3V_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SW"; }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - power-supply = <®_3v3_sw>; - status = "okay"; -}; - &can1 { xceiver-supply = <®_3v3_sw>; status = "okay"; @@ -123,27 +60,10 @@ status = "okay"; }; -&hdmi { - status = "okay"; -}; - /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM, PWM, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; @@ -164,14 +84,6 @@ status = "okay"; }; -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; @@ -198,11 +110,11 @@ status = "okay"; }; -®_usb_otg_vbus { +®_usb_host_vbus { status = "okay"; }; -®_usb_host_vbus { +®_usb_otg_vbus { status = "okay"; }; @@ -246,28 +158,13 @@ /* MMC1 */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; - cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; status = "okay"; }; /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; - -&iomuxc { - /* - * Mux the Apalis GPIOs - */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; -}; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index 86e8478..44637d6 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -1,274 +1,37 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ -/dts-v1/; - -#include -#include -#include -#include "imx6q.dtsi" -#include "imx6qdl-apalis.dtsi" +#include "imx6q-apalis-ixora-v1.2.dts" / { model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1"; - compatible = "toradex,apalis_imx6q-ixora-v1.1", - "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", + compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q", "fsl,imx6q"; - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds_ixora>; - - led4-green { - label = "LED_4_GREEN"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - - led4-red { - label = "LED_4_RED"; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - led5-green { - label = "LED_5_GREEN"; - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - }; - - led5-red { - label = "LED_5_RED"; - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - }; - }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; -}; +/delete-node/ &eeprom; +/delete-node/ ®_3v3_vmmc; +/delete-node/ ®_can1_supply; +/delete-node/ ®_can2_supply; &can1 { - status = "okay"; + /delete-property/ xceiver-supply; }; &can2 { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ -&i2c1 { - status = "okay"; - - /* - * Touchscreen is using SODIMM 28/30, also used for PWM, PWM, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* - * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier - * board) - */ -&i2c3 { - status = "okay"; -}; - -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - /* active-high meaning opposite of regular PERST# active-low polarity */ - reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - reset-gpio-active-high; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -®_usb_otg_vbus { - status = "okay"; -}; - -®_usb_host_vbus { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sound_spdif { - status = "okay"; -}; - -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_host_vbus>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - status = "okay"; + /delete-property/ xceiver-supply; }; /* MMC1 */ &usdhc1 { + /delete-property/ cap-power-off-card; + /delete-property/ pinctrl-1; + /delete-property/ vmmc-supply; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; - cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; - bus-width = <4>; - status = "okay"; -}; - -&iomuxc { - /* - * Mux the Apalis GPIOs - */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; - - pinctrl_leds_ixora: ledsixoragrp { - fsl,pins = < - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts new file mode 100644 index 0000000..f9f7d99 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2014-2022 Toradex + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + */ + +/dts-v1/; + +#include +#include +#include +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2"; + compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q", + "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + i2c2 = &i2c2; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + led4-green { + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + label = "LED_4_GREEN"; + }; + + led4-red { + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + label = "LED_4_RED"; + }; + + led5-green { + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + label = "LED_5_GREEN"; + }; + + led5-red { + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + label = "LED_5_RED"; + }; + }; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + startup-delay-us = <100>; + }; + + reg_can1_supply: regulator-can1-supply { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + regulator-name = "can1_supply"; + }; + + reg_can2_supply: regulator-can2-supply { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can2_power>; + regulator-name = "can2_supply"; + }; +}; + +&can1 { + xceiver-supply = <®_can1_supply>; + status = "okay"; +}; + +&can2 { + xceiver-supply = <®_can2_supply>; + status = "okay"; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart24_forceoff>; + + /* + * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis + * UART2 and UART3. If one wants to disable the transceiver force + * the GPIO to output-low, if one wants to control the transceiver + * from user space delete the hog node. + */ + uart-2-4-on-x21-enable-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */ + output-high; + }; +}; + +/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) + */ +&i2c3 { + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; + /* active-high meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +®_usb_otg_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sound_spdif { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +/* MMC1 */ +&usdhc1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>; + bus-width = <4>; + cap-power-off-card; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; + + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + >; + }; + + pinctrl_enable_can2_power: enablecan2powergrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0 + >; + }; + + pinctrl_uart24_forceoff: uart24forceoffgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + >; + }; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; + + pinctrl_mmc_cd_sleep: mmccdslpgrp { + fsl,pins = < + /* MMC1 CD */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0 + >; + }; + + pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 62e7277..ce39c6a 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -30,95 +30,33 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds_ixora>; led4-green { - label = "LED_4_GREEN"; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + label = "LED_4_GREEN"; }; led4-red { - label = "LED_4_RED"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + label = "LED_4_RED"; }; led5-green { - label = "LED_5_GREEN"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + label = "LED_5_GREEN"; }; led5-red { - label = "LED_5_RED"; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + label = "LED_5_RED"; }; }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; -}; - &can1 { status = "okay"; }; @@ -127,27 +65,10 @@ status = "okay"; }; -&hdmi { - status = "okay"; -}; - /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM, PWM, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -168,14 +89,6 @@ status = "okay"; }; -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; @@ -201,11 +114,11 @@ status = "okay"; }; -®_usb_otg_vbus { +®_usb_host_vbus { status = "okay"; }; -®_usb_host_vbus { +®_usb_otg_vbus { status = "okay"; }; @@ -249,21 +162,13 @@ /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; &iomuxc { - /* Mux the Apalis GPIOs */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; - pinctrl_leds_ixora: ledsixoragrp { fsl,pins = < MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts index 8768222..8263bfe 100644 --- a/arch/arm/boot/dts/imx6q-bosch-acc.dts +++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts @@ -570,7 +570,7 @@ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; voltage-ranges = <3300 3300>; vmmc-supply = <®_sw4>; fsl,wp-controller; @@ -594,7 +594,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog1>; fsl,ext-reset-output; - timeout-sec=<10>; + timeout-sec = <10>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts index 7f1f19b..a3f247c 100644 --- a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts +++ b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts @@ -125,3 +125,9 @@ >; }; }; + +®_tft_vcom { + regulator-min-microvolt = <3160000>; + regulator-max-microvolt = <3160000>; + voltage-table = <3160000 73>; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 9caba45..3b77eae 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -159,14 +159,14 @@ }; }; - soc { + soc: soc { ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - bus@2000000 { /* AIPS1 */ + aips1: bus@2000000 { /* AIPS1 */ spba-bus@2000000 { ecspi5: spi@2018000 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index bd763ba..7c17b91 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -1,11 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ #include +#include / { model = "Toradex Apalis iMX6Q/D Module"; @@ -19,88 +20,182 @@ backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - pwms = <&pwm4 0 5000000>; - enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + power-supply = <®_module_3v3>; + pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + clk_ov5640_osc: clk-ov5640-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = ; + wakeup-source; + }; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_dpi: panel-dpi { + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds: panel-lvds { + compatible = "panel-lvds"; + backlight = <&backlight>; + status = "disabled"; + + port { + lvds_panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; }; reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "+V3.3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; }; reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "+V3.3_AUDIO"; - regulator-min-microvolt = <3300000>; + regulator-always-on; regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_AUDIO"; + }; + + reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "DOVDD/DVDD_1.8V"; + /* Note: The CSI module uses on-board 3.3V_SW supply */ + vin-supply = <®_module_3v3>; + }; + + reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd { + compatible = "regulator-fixed"; regulator-always-on; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "AVDD/AFVDD_2.8V"; + /* Note: The CSI module uses on-board 3.3V_SW supply */ + vin-supply = <®_module_3v3>; }; reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_otg_vbus"; status = "disabled"; }; /* on module USB hub */ reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; - regulator-name = "usb_host_vbus_hub"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus_hub"; startup-delay-us = <2000>; - enable-active-high; status = "okay"; }; reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus"; vin-supply = <®_usb_host_vbus_hub>; status = "disabled"; }; sound { compatible = "fsl,imx-audio-sgtl5000"; - model = "imx6q-apalis-sgtl5000"; - ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; + model = "imx6q-apalis-sgtl5000"; mux-ext-port = <4>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; }; sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; spdif-controller = <&spdif>; spdif-in; spdif-out; + model = "imx-spdif"; status = "disabled"; }; }; @@ -125,6 +220,10 @@ status = "disabled"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + /* Apalis SPI1 */ &ecspi1 { cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; @@ -141,6 +240,214 @@ status = "disabled"; }; +&gpio1 { + gpio-line-names = "MXM3_84", + "MXM3_4", + "MXM3_15/GPIO7", + "MXM3_96", + "MXM3_37", + "", + "MXM3_17/GPIO8", + "MXM3_14", + "MXM3_12", + "MXM3_2", + "MXM3_184", + "MXM3_180", + "MXM3_178", + "MXM3_176", + "MXM3_188", + "MXM3_186", + "MXM3_160", + "MXM3_162", + "MXM3_150", + "MXM3_144", + "MXM3_154", + "MXM3_146", + "", + "", + "MXM3_72"; +}; + +&gpio2 { + gpio-line-names = "MXM3_148", + "MXM3_152", + "MXM3_156", + "MXM3_158", + "MXM3_1/GPIO1", + "MXM3_3/GPIO2", + "MXM3_5/GPIO3", + "MXM3_7/GPIO4", + "MXM3_95", + "MXM3_6", + "MXM3_8", + "MXM3_123", + "MXM3_126", + "MXM3_128", + "MXM3_130", + "MXM3_132", + "MXM3_253", + "MXM3_251", + "MXM3_283", + "MXM3_281", + "MXM3_279", + "MXM3_277", + "MXM3_243", + "MXM3_235", + "MXM3_231", + "MXM3_229", + "MXM3_233", + "MXM3_198", + "MXM3_275", + "MXM3_273", + "MXM3_207", + "MXM3_122"; +}; + +&gpio3 { + gpio-line-names = "MXM3_271", + "MXM3_269", + "MXM3_301", + "MXM3_299", + "MXM3_297", + "MXM3_295", + "MXM3_293", + "MXM3_291", + "MXM3_289", + "MXM3_287", + "MXM3_249", + "MXM3_247", + "MXM3_245", + "MXM3_286", + "MXM3_239", + "MXM3_35", + "MXM3_205", + "MXM3_203", + "MXM3_201", + "MXM3_116", + "MXM3_114", + "MXM3_262", + "MXM3_274", + "MXM3_124", + "MXM3_110", + "MXM3_120", + "MXM3_263", + "MXM3_265", + "", + "MXM3_135", + "MXM3_261", + "MXM3_259"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "MXM3_194", + "MXM3_136", + "MXM3_134", + "MXM3_140", + "MXM3_138", + "", + "MXM3_220", + "", + "", + "MXM3_18", + "MXM3_16", + "", + "", + "MXM3_214", + "MXM3_216", + "MXM3_164"; +}; + +&gpio5 { + gpio-line-names = "MXM3_159", + "", + "", + "", + "MXM3_257", + "", + "", + "", + "", + "", + "MXM3_200", + "MXM3_196", + "MXM3_204", + "MXM3_202", + "", + "", + "", + "", + "MXM3_191", + "MXM3_197", + "MXM3_77", + "MXM3_195", + "MXM3_221", + "MXM3_225", + "MXM3_223", + "MXM3_227", + "MXM3_209", + "MXM3_211", + "MXM3_118", + "MXM3_112", + "MXM3_187", + "MXM3_185"; +}; + +&gpio6 { + gpio-line-names = "MXM3_183", + "MXM3_181", + "MXM3_179", + "MXM3_177", + "MXM3_175", + "MXM3_173", + "MXM3_255", + "MXM3_83", + "MXM3_91", + "MXM3_13/GPIO6", + "MXM3_11/GPIO5", + "MXM3_79", + "", + "", + "MXM3_190", + "MXM3_193", + "MXM3_89"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_99", + "MXM3_85", + "MXM3_217", + "MXM3_215"; +}; + +&gpr { + ipu1_csi0_mux { + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@1 { + reg = <1>; + ipu1_csi0_mux_from_parallel_sensor: endpoint { + remote-endpoint = <&adv7280_to_ipu1_csi0_mux>; + }; + }; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -177,6 +484,16 @@ scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + /* These GPIOs are muxed with the iomuxc node */ + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* MXM3_11 */ + reg = <0x4a>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* MXM3_13 */ + status = "disabled"; + }; }; /* @@ -192,103 +509,105 @@ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; + fsl,pmic-stby-poweroff; reg = <0x08>; regulators { sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1975000>; + regulator-min-microvolt = <400000>; }; swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5150000>; + regulator-min-microvolt = <5000000>; }; snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1000000>; }; vref_reg: vrefddr { - regulator-boot-on; regulator-always-on; + regulator-boot-on; }; vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; }; vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; }; }; codec: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; - clocks = <&clks IMX6QDL_CLK_CKO>; + reg = <0x0a>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; VDDD-supply = <&vgen4_reg>; @@ -297,15 +616,15 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - reg = <0x41>; + blocks = <0x5>; + id = <0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; interrupt-controller; - id = <0>; - blocks = <0x5>; + interrupt-parent = <&gpio4>; irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + reg = <0x41>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ @@ -315,7 +634,7 @@ /* ADC conversion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen: stmpe-touchscreen { + stmpe_ts: stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -330,13 +649,14 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; + status = "disabled"; }; - stmpe_adc: stmpe-adc { + stmpe_adc: stmpe_adc { compatible = "st,stmpe-adc"; + #io-channel-cells = <1>; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; - #io-channel-cells = <1>; }; }; }; @@ -353,6 +673,90 @@ scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + adv_7280: adv7280@21 { + compatible = "adi,adv7280"; + adv,force-bt656-4; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + reg = <0x21>; + status = "disabled"; + + port { + adv7280_to_ipu1_csi0_mux: endpoint { + bus-width = <8>; + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; + + ov5640_csi_cam: ov5640_mipi@3c { + compatible = "ovti,ov5640"; + AVDD-supply = <®_ov5640_2v8_a_vdd>; + DOVDD-supply = <®_ov5640_1v8_d_o_vdd>; + DVDD-supply = <®_ov5640_1v8_d_o_vdd>; + clock-names = "xclk"; + clocks = <&clks IMX6QDL_CLK_CKO2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cam_mclk>; + /* These GPIOs are muxed with the iomuxc node */ + powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + reg = <0x3c>; + reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5640_to_mipi_csi2: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi_from_ov5640>; + }; + }; + }; +}; + +&ipu1_di1_disp1 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + lvds-channel@0 { + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + }; + }; + }; +}; + +&mipi_csi { + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + + mipi_csi_from_ov5640: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5640_to_mipi_csi2>; + }; + }; }; &pwm1 { @@ -374,7 +778,6 @@ }; &pwm4 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "disabled"; @@ -391,72 +794,73 @@ }; &uart1 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; &uart2 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; &uart4 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_dte>; - fsl,dte-mode; status = "disabled"; }; &uart5 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5_dte>; - fsl,dte-mode; status = "disabled"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; status = "disabled"; }; /* MMC1 */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; disable-wp; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; + vqmmc-supply = <®_module_3v3>; status = "disabled"; }; /* SD1 */ &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vqmmc-supply = <®_module_3v3>; bus-width = <4>; disable-wp; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vqmmc-supply = <®_module_3v3>; status = "disabled"; }; /* eMMC */ &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; no-1-8-v; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_module_3v3>; status = "okay"; }; @@ -465,49 +869,57 @@ }; &iomuxc { - pinctrl_apalis_gpio1: gpio2io04grp { + /* Mux the Apalis GPIOs */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 + &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 + &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 + &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 + >; + + pinctrl_apalis_gpio1: apalisgpio1grp { fsl,pins = < MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 >; }; - pinctrl_apalis_gpio2: gpio2io05grp { + pinctrl_apalis_gpio2: apalisgpio2grp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 >; }; - pinctrl_apalis_gpio3: gpio2io06grp { + pinctrl_apalis_gpio3: apalisgpio3grp { fsl,pins = < MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 >; }; - pinctrl_apalis_gpio4: gpio2io07grp { + pinctrl_apalis_gpio4: apalisgpio4grp { fsl,pins = < MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 >; }; - pinctrl_apalis_gpio5: gpio6io10grp { + pinctrl_apalis_gpio5: apalisgpio5grp { fsl,pins = < MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 >; }; - pinctrl_apalis_gpio6: gpio6io09grp { + pinctrl_apalis_gpio6: apalisgpio6grp { fsl,pins = < MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 >; }; - pinctrl_apalis_gpio7: gpio1io02grp { + pinctrl_apalis_gpio7: apalisgpio7grp { fsl,pins = < MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 >; }; - pinctrl_apalis_gpio8: gpio1io06grp { + pinctrl_apalis_gpio8: apalisgpio8grp { fsl,pins = < MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 >; @@ -600,7 +1012,7 @@ >; }; - pinctrl_gpio_bl_on: gpioblon { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 >; @@ -745,7 +1157,7 @@ >; }; - pinctrl_mmc_cd: gpiommccdgrp { + pinctrl_mmc_cd: mmccdgrp { fsl,pins = < /* MMC1 CD */ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 @@ -776,35 +1188,35 @@ >; }; - pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + pinctrl_regulator_usbh_pwr: regusbhpwrgrp { fsl,pins = < /* USBH_EN */ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 >; }; - pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp { + pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp { fsl,pins = < /* USBH_HUB_EN */ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 >; }; - pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp { + pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp { fsl,pins = < /* USBO1 power en */ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 >; }; - pinctrl_reset_moci: gpioresetmocigrp { + pinctrl_reset_moci: resetmocigrp { fsl,pins = < /* RESET_MOCI control */ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 >; }; - pinctrl_sd_cd: gpiosdcdgrp { + pinctrl_sd_cd: sdcdgrp { fsl,pins = < /* SD1 CD */ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 @@ -824,13 +1236,22 @@ >; }; - pinctrl_touch_int: gpiotouchintgrp { + pinctrl_touch_int: touchintgrp { fsl,pins = < /* STMPE811 interrupt */ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 >; }; + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + pinctrl_uart1_dce: uart1dcegrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 @@ -848,15 +1269,6 @@ >; }; - /* Additional DTR, DSR, DCD */ - pinctrl_uart1_ctrl: uart1ctrlgrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 - MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 - MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 - >; - }; - pinctrl_uart2_dce: uart2dcegrp { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 @@ -910,7 +1322,7 @@ >; }; - pinctrl_usdhc1_4bit: usdhc1grp_4bit { + pinctrl_usdhc1_4bit: usdhc1-4bitgrp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 @@ -921,7 +1333,7 @@ >; }; - pinctrl_usdhc1_8bit: usdhc1grp_8bit { + pinctrl_usdhc1_8bit: usdhc1-8bitgrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index c383e0e..023e762 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -6,6 +6,7 @@ */ #include +#include / { model = "Toradex Colibri iMX6DL/S Module"; @@ -13,13 +14,13 @@ backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; power-supply = <®_module_3v3>; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>; status = "disabled"; }; @@ -520,6 +521,8 @@ compatible = "fsl,sgtl5000"; clocks = <&clks IMX6QDL_CLK_CKO>; lrclk-strength = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; @@ -593,7 +596,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_atmel_conn>; reg = <0x4a>; - reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* SODIMM 106 */ status = "disabled"; }; }; @@ -618,7 +621,6 @@ /* Colibri PWM */ &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; @@ -739,8 +741,6 @@ pinctrl_audmux: audmuxgrp { fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 @@ -991,6 +991,13 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi index 19578f6..f0db0d4 100644 --- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi +++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi @@ -94,6 +94,9 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; non-removable; + no-1-8-v; + no-sd; + no-sdio; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi index 69ae430..8254bce 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi @@ -15,13 +15,13 @@ reg = <0>; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <®_3v3>; + vcc-supply = <®_3v3>; pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <850>; ti,y-plate-ohms = /bits/ 16 <295>; ti,pressure-min = /bits/ 16 <2>; ti,pressure-max = /bits/ 16 <1500>; - ti,vref-mv = /bits/ 16 <3300>; + ti,vref-mv = /bits/ 16 <3300>; ti,settle-delay-usec = /bits/ 16 <15>; ti,vref-delay-usecs = /bits/ 16 <0>; ti,penirq-recheck-delay-usecs = /bits/ 16 <100>; diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi index 77a91a9..3def1b6 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi @@ -149,6 +149,16 @@ gpio = <&gpio4 11 GPIO_ACTIVE_LOW>; }; + reg_tft_vcom: regulator-tft-vcom { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 20000 0>; + regulator-name = "tft_vcom"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + voltage-table = <3600000 26>; + }; + reg_vcc_mmc: regulator-vcc-mmc { compatible = "regulator-fixed"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index fded07f..d6ba4b2 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -226,7 +226,7 @@ reg = <0x28>; #gpio-cells = <2>; gpio-controller; - ngpio = <32>; + ngpios = <62>; }; sgtl5000: codec@a { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index d27beb4..4f7fefc 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -143,7 +143,7 @@ #phy-cells = <0>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -290,7 +290,7 @@ status = "disabled"; }; - bus@2000000 { /* AIPS1 */ + aips1: bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -762,7 +762,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-enable-ramp-delay = <150>; + regulator-enable-ramp-delay = <380>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; @@ -941,7 +941,7 @@ }; }; - bus@2100000 { /* AIPS2 */ + aips2: bus@2100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index a17b8bb..663ee9d 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -27,7 +27,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - cover { + key-cover { label = "Cover"; gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; linux,code = ; @@ -35,19 +35,19 @@ wakeup-source; }; - fl { + key-fl { label = "Frontlight"; gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; linux,code = ; }; - home { + key-home { label = "Home"; gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; linux,code = ; }; - power { + key-power { label = "Power"; gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; linux,code = ; @@ -60,7 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_led>; - on { + led-0 { label = "tolinoshine2hd:white:on"; gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index fc63343..4d075e2 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -154,7 +154,7 @@ #phy-cells = <0>; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index a6cf0f2..4386831 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -72,7 +72,6 @@ &adc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; - num-channels = <3>; vref-supply = <®_vref_adc>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index 0d4ba94..38ea4dc 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -83,11 +83,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; vref-supply = <®_adc1_vref_3v3>; - /* - * driver can not separate a specific channel so we request 4 channels - * here - we need only the fourth channel - */ - num-channels = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi index caf2c5d..4b87e2dc 100644 --- a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi @@ -14,7 +14,7 @@ }; &usdhc2 { - fsl,tuning-step= <6>; + fsl,tuning-step = <6>; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index afeec01..c95efd1 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -64,20 +64,18 @@ clock-frequency = <696000000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; - operating-points = < + operating-points = /* kHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < + <696000 1275000>, + <528000 1175000>, + <396000 1025000>, + <198000 950000>; + fsl,soc-operating-points = /* KHz uV */ - 696000 1275000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; + <696000 1275000>, + <528000 1175000>, + <396000 1175000>, + <198000 1175000>; clocks = <&clks IMX6UL_CLK_ARM>, <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_PLL2_PFD2>, @@ -139,7 +137,7 @@ interrupts = ; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -149,6 +147,9 @@ ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; intc: interrupt-controller@a01000 { @@ -543,7 +544,7 @@ }; kpp: keypad@20b8000 { - compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; + compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = ; clocks = <&clks IMX6UL_CLK_KPP>; @@ -923,7 +924,6 @@ reg = <0x02198000 0x4000>; interrupts = ; clocks = <&clks IMX6UL_CLK_ADC1>; - num-channels = <2>; clock-names = "adc"; fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; @@ -998,7 +998,7 @@ }; csi: csi@21c4000 { - compatible = "fsl,imx6ul-csi", "fsl,imx7-csi"; + compatible = "fsl,imx6ul-csi"; reg = <0x021c4000 0x4000>; interrupts = ; clocks = <&clks IMX6UL_CLK_CSI>; @@ -1007,7 +1007,7 @@ }; lcdif: lcdif@21c8000 { - compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif"; reg = <0x021c8000 0x4000>; interrupts = ; clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, @@ -1028,7 +1028,7 @@ qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; + compatible = "fsl,imx6ul-qspi"; reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = ; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 15621e0..577a424 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -94,7 +94,6 @@ }; &adc1 { - num-channels = <10>; vref-supply = <®_module_3v3_avdd>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; @@ -166,7 +165,7 @@ atmel_mxt_ts: touchscreen@4a { compatible = "atmel,maxtouch"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_atmel_conn>; + pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>; reg = <0x4a>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ @@ -331,7 +330,6 @@ pinctrl_atmel_conn: atmelconngrp { fsl,pins = < MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ >; }; @@ -684,6 +682,12 @@ }; &iomuxc_snvs { + pinctrl_atmel_snvs_conn: atmelsnvsconngrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ + >; + }; + pinctrl_snvs_gpio1: snvsgpio1grp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */ diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi index 326e6da..8541cb3 100644 --- a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi @@ -14,7 +14,7 @@ }; &usdhc2 { - fsl,tuning-step= <6>; + fsl,tuning-step = <6>; /* Errata ERR010450 Workaround */ max-frequency = <99000000>; assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi index 8e4d5cd..be593d4 100644 --- a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi @@ -14,7 +14,7 @@ }; &usdhc2 { - fsl,tuning-step= <6>; + fsl,tuning-step = <6>; /* Errata ERR010450 Workaround */ max-frequency = <99000000>; assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index 9bf6749..2bccd45 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -50,7 +50,7 @@ }; / { - soc { + soc: soc { aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts index 59bcfc9..c92e4e2 100644 --- a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts +++ b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts @@ -29,6 +29,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi index b770fc9..fa488a6 100644 --- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi @@ -1,169 +1,79 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG - * + * Copyright 2017-2022 Toradex */ - -#include -#include - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v0: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbh_vbus: regulator-usbh-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; -}; - +/* Colibri AD0 to AD3 */ &adc1 { status = "okay"; }; -/* - * ADC2 is not available on the Aster board and - * conflicts with AD7879 resistive touchscreen. - */ -&adc2 { - status = "disabled"; -}; - -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; +/* Colibri SSP */ +&ecspi3 { + cs-gpios = < + &gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or */ + &gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */ + &gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */ + >; status = "okay"; }; +/* Colibri Fast Ethernet */ &fec1 { status = "okay"; }; +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ &i2c4 { status = "okay"; - - /* Microchip/Atmel maxtouch controller */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiotouch>; - reg = <0x4a>; - interrupt-parent = <&gpio2>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ - reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 */ - }; - - /* M41T0M6 real time clock on carrier board */ - rtc: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -&iomuxc { - pinctrl_gpiotouch: touchgpios { - fsl,pins = < - MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 - >; - }; -}; - -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; }; +/* Colibri PWM */ &pwm1 { status = "okay"; }; +/* Colibri PWM */ &pwm2 { status = "okay"; }; +/* Colibri PWM */ &pwm3 { status = "okay"; }; +/* Colibri PWM */ &pwm4 { status = "okay"; }; +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ &uart1 { status = "okay"; }; +/* Colibri UART_B */ &uart2 { status = "okay"; }; +/* Colibri UART_C */ &uart3 { status = "okay"; }; +/* Colibri USBC */ &usbotg1 { status = "okay"; }; +/* Colibri MMC/SD */ &usdhc1 { - keep-power-in-suspend; - no-1-8-v; - wakeup-source; - vmmc-supply = <®_3v3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 3b9df8c..826f13d 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -1,194 +1,110 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ / { - aliases { - rtc0 = &rtc; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* fixed crystal dedicated to mpc258x */ + /* Fixed crystal dedicated to MCP2515. */ clk16m: clk16m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <16000000>; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v0: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbh_vbus: regulator-usbh-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; -}; - -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - - status = "okay"; }; +/* Colibri AD0 to AD3 */ &adc1 { status = "okay"; }; -&adc2 { - status = "okay"; +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM, PWM, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ + pinctrl-0 = <&pinctrl_atmel_adapter>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ + status = "disabled"; }; +/* Colibri SSP */ &ecspi3 { status = "okay"; mcp2515: can@0 { + clocks = <&clk16m>; compatible = "microchip,mcp2515"; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can_int>; reg = <0>; - clocks = <&clk16m>; - interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; vdd-supply = <®_3v3>; xceiver-supply = <®_5v0>; - status = "okay"; }; }; +/* Colibri Fast Ethernet */ &fec1 { status = "okay"; }; +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ &i2c4 { status = "okay"; - - /* - * Touchscreen is using SODIMM 28/30, also used for PWM, PWM, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiotouch>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; }; +/* Colibri PWM */ &pwm1 { status = "okay"; }; +/* Colibri PWM */ &pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ status = "okay"; }; +/* Colibri PWM */ &pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ status = "okay"; }; +/* Colibri PWM */ &pwm4 { status = "okay"; }; +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ &uart1 { status = "okay"; }; +/* Colibri UART_B */ &uart2 { status = "okay"; }; +/* Colibri UART_C */ &uart3 { status = "okay"; }; +/* Colibri USBC */ &usbotg1 { status = "okay"; }; +/* Colibri MMC/SD */ &usdhc1 { - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; status = "okay"; }; - -&iomuxc { - pinctrl_gpiotouch: touchgpios { - fsl,pins = < - MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 - MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi new file mode 100644 index 0000000..6e19961 --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */ + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + startup-delay-us = <100>; + }; +}; + +/* Colibri AD0 to AD3 */ +&adc1 { + status = "okay"; +}; + +/* Colibri SSP */ +&ecspi3 { + status = "okay"; +}; + +/* Colibri Fast Ethernet */ +&fec1 { + status = "okay"; +}; + +&gpio2 { + /* + * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to + * turn the transceiver off, that property has to be deleted and the gpio handled in + * userspace. + * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on. + */ + uart-b-c-on-x14-enable-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +&gpio5 { + uart-a-on-x13-enable-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c4 { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm1 { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm2 { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm3 { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm4 { + status = "okay"; +}; + +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + status = "okay"; +}; + +/* Colibri UART_B */ +&uart2 { + status = "okay"; +}; + +/* Colibri UART_C */ +&uart3 { + status = "okay"; +}; + +/* Colibri USBC */ +&usbotg1 { + status = "okay"; +}; + +/* Colibri MMC/SD, UHS-I capable uSD slot */ +&usdhc1 { + cap-power-off-card; + /delete-property/ keep-power-in-suspend; + /delete-property/ no-1-8-v; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/imx7-colibri-iris.dtsi new file mode 100644 index 0000000..175c5d4 --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-iris.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/* Colibri AD0 to AD3 */ +&adc1 { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM, PWM, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ + pinctrl-0 = <&pinctrl_atmel_adapter>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ +}; + +/* Colibri SSP */ +&ecspi3 { + status = "okay"; +}; + +/* Colibri Fast Ethernet */ +&fec1 { + status = "okay"; +}; + +&gpio2 { + /* + * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled in userspace. + * The same applies to uart1_tx_on where the UART1 transceiver is turned on. + */ + uart25-tx-on-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +&gpio5 { + uart1-tx-on-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c4 { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm1 { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM */ +&pwm4 { + status = "okay"; +}; + +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + status = "okay"; +}; + +/* Colibri UART_B */ +&uart2 { + status = "okay"; +}; + +/* Colibri UART_C */ +&uart3 { + status = "okay"; +}; + +/* Colibri USBC */ +&usbotg1 { + status = "okay"; +}; + +/* Colibri MMC/SD */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index f1c60b0..a8c31ee 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -1,96 +1,198 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ +#include + / { - bl: backlight { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + backlight: backlight { + brightness-levels = <0 45 63 88 119 158 203 255>; compatible = "pwm-backlight"; + default-brightness-level = <4>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - pwms = <&pwm1 0 5000000 0>; - enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + power-supply = <®_module_3v3>; + pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; }; - reg_module_3v3: regulator-module-3v3 { + chosen { + stdout-path = "serial0:115200n8"; + }; + + extcon_usbc_det: usbc-det { + compatible = "linux,extcon-usb-gpio"; + debounce = <25>; + id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbc_det>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = ; + wakeup-source; + }; + }; + + panel_dpi: panel-dpi { + backlight = <&backlight>; + compatible = "edt,et057090dhu"; + power-supply = <®_3v3>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; - regulator-name = "+V3.3"; - regulator-min-microvolt = <3300000>; + regulator-always-on; regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V"; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "5V"; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; }; reg_module_3v3_avdd: regulator-module-3v3-avdd { compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; regulator-name = "+V3.3_AVDD_AUDIO"; + }; + + reg_module_3v3_eth: regulator-module-3v3-eth { + compatible = "regulator-fixed"; + off-on-delay-us = <200000>; + regulator-name = "+V3.3_ETH"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-boot-on; + startup-delay-us = <200000>; + vin-supply = <®_LDO1>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VCC_USB[1-4]"; + vin-supply = <®_5v0>; }; sound { compatible = "simple-audio-card"; - simple-audio-card,name = "imx7-sgtl5000"; - simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,cpu { sound-dai = <&sai1>; }; dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + sound-dai = <&codec>; }; }; }; +/* Colibri AD0 to AD3 */ &adc1 { vref-supply = <®_DCDC3>; }; -&adc2 { - vref-supply = <®_DCDC3>; -}; +/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */ &cpu0 { cpu-supply = <®_DCDC2>; }; +/* Colibri SSP */ &ecspi3 { + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; - cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; }; +/* Colibri Fast Ethernet */ &fec1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_enet1>; - pinctrl-1 = <&pinctrl_enet1_sleep>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; - clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; - assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rmii"; - phy-supply = <®_LDO1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rmii"; + phy-supply = <®_module_3v3_eth>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_enet1>; + pinctrl-1 = <&pinctrl_enet1_sleep>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Micrel KSZ8041RNL */ + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + micrel,led-mode = <0>; + reg = <0>; + }; + }; }; &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; - status = "disabled"; }; &flexcan2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; - status = "disabled"; }; &gpio1 { @@ -271,14 +373,16 @@ "SODIMM_137"; }; +/* NAND on such SKUs */ &gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; fsl,use-minimum-ecc; - nand-on-flash-bbt; nand-ecc-mode = "hw"; + nand-on-flash-bbt; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; }; +/* On-module Power I2C */ &i2c1 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; @@ -286,33 +390,33 @@ pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>; scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - status = "okay"; codec: sgtl5000@a { - compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; - reg = <0x0a>; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1_mclk>; + reg = <0xa>; VDDA-supply = <®_module_3v3_avdd>; - VDDIO-supply = <®_module_3v3>; VDDD-supply = <®_DCDC3>; + VDDIO-supply = <®_module_3v3>; }; - ad7879@2c { + ad7879_ts: touchscreen@2c { + adi,acquisition-time = /bits/ 8 <1>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,median-filter-size = /bits/ 8 <2>; + adi,resistance-plate-x = <120>; compatible = "adi,ad7879-1"; - reg = <0x2c>; interrupt-parent = <&gpio1>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reg = <0x2c>; touchscreen-max-pressure = <4096>; - adi,resistance-plate-x = <120>; - adi,first-conversion-delay = /bits/ 8 <3>; - adi,acquisition-time = /bits/ 8 <1>; - adi,median-filter-size = /bits/ 8 <2>; - adi,averaging = /bits/ 8 <1>; - adi,conversion-interval = /bits/ 8 <255>; + status = "disabled"; }; pmic@33 { @@ -320,71 +424,81 @@ reg = <0x33>; regulators { - reg_DCDC1: DCDC1 { /* V1.0_SOC */ - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; + reg_DCDC1: DCDC1 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1000000>; + regulator-name = "+V1.0_SOC"; }; - reg_DCDC2: DCDC2 { /* V1.1_ARM */ - regulator-min-microvolt = <975000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; + reg_DCDC2: DCDC2 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <975000>; + regulator-name = "+V1.1_ARM"; }; - reg_DCDC3: DCDC3 { /* V1.8 */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; + reg_DCDC3: DCDC3 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8"; }; - reg_DCDC4: DCDC4 { /* V1.35_DRAM */ - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; + reg_DCDC4: DCDC4 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <1350000>; + regulator-name = "+V1.35_DRAM"; }; - reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + reg_LDO1: LDO1 { regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PWR_EN_+V3.3_ETH"; }; - reg_LDO2: LDO2 { /* +V1.8_SD */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + reg_LDO2: LDO2 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SD"; }; - reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */ - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + reg_LDO3: LDO3 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PWR_EN_+V3.3_LPSR"; }; - reg_LDO4: LDO4 { /* V1.8_LPSR */ - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; + reg_LDO4: LDO4 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_LPSR"; }; - reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */ - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; + reg_LDO5: LDO5 { regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PWR_EN_+V3.3"; }; }; }; }; +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ &i2c4 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; @@ -392,36 +506,69 @@ pinctrl-1 = <&pinctrl_i2c4_recovery>; scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "disabled"; + + /* Atmel maxtouch controller */ + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_connector>; + reg = <0x4a>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */ + status = "disabled"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + status = "disabled"; + }; }; &lcdif { + assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + status = "disabled"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; }; +/* Colibri PWM */ &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; }; +/* Colibri PWM */ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; }; +/* Colibri PWM */ &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; }; +/* Colibri PWM */ &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; }; ®_1p0d { - vin-supply = <®_DCDC3>; + vin-supply = <®_DCDC3>; /* VDDA_1P8_IN */ }; &sai1 { @@ -430,237 +577,257 @@ status = "okay"; }; +/* Colibri UART_A */ &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; - uart-has-rtscts; fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; + uart-has-rtscts; }; +/* Colibri UART_B */ &uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; - uart-has-rtscts; fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; }; +/* Colibri UART_C */ &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; }; +/* Colibri USBC */ &usbotg1 { - dr_mode = "host"; + dr_mode = "otg"; + extcon = <0>, <&extcon_usbc_det>; }; +/* Colibri MMC/SD */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; disable-wp; + no-1-8-v; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; + pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>; + vmmc-supply = <®_3v3>; vqmmc-supply = <®_LDO2>; + wakeup-source; }; +/* eMMC on 1GB (eMMC) SKUs */ &usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; assigned-clock-rates = <400000000>; bus-width = <8>; fsl,tuning-step = <2>; - vmmc-supply = <®_module_3v3>; - vqmmc-supply = <®_DCDC3>; non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; sdhci-caps-mask = <0x80000000 0x0>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <®_DCDC3>; }; &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4 - &pinctrl_gpio7 &pinctrl_usbc_det>; - - pinctrl_gpio1: gpio1-grp { - fsl,pins = < - MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ - MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ - MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ - MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ - MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ - MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ - MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ - MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ - MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ - MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ - MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */ - MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */ - MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */ - MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */ - MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */ - MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ - MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ - MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ - MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */ - MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ - MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ - MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ - MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ - MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ - MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ - MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ - MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */ - MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */ - MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */ - MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */ - MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */ - MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */ - MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */ - MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */ - MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */ - MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */ - MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */ - MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */ - MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */ - MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */ - >; - }; - - pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */ + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>; + + /* + * Atmel MXT touchsceen + Capacitive Touch Adapter + * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3. + * Don't use them simultaneously. + */ + pinctrl_atmel_adapter: atmelconnectorgrp { fsl,pins = < - MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */ - MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ - MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ - MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ - MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */ - MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */ - MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */ - MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */ - MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */ - MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */ - MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 /* SODIMM 28 / INT */ + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 /* SODIMM 30 / RST */ >; }; - pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */ + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + pinctrl_atmel_connector: atmeladaptergrp { fsl,pins = < - MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */ - MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ - MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ - MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ - MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */ - MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 / RST */ + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 / INT */ >; }; - pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */ + pinctrl_can_int: canintgrp { fsl,pins = < - MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */ - MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ >; }; - pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */ + pinctrl_ecspi3: ecspi3grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 /* SODIMM 90 */ + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 /* SODIMM 92 */ + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 /* SODIMM 88 */ >; }; - pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */ + pinctrl_ecspi3_cs: ecspi3csgrp { fsl,pins = < - MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 - >; - }; - - pinctrl_can_int: can-int-grp { - fsl,pins = < - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 /* SODIMM 86 */ >; }; pinctrl_enet1: enet1grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 - - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73 MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73 MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 MX7D_PAD_SD2_WP__ENET1_MDC 0x3 >; }; - pinctrl_enet1_sleep: enet1sleepgrp { + pinctrl_enet1_sleep: enet1-sleepgrp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0 MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x0 MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0 MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0 - - MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0 + MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0 MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0 MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0 + MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0 MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0 MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x0 MX7D_PAD_SD2_WP__GPIO5_IO10 0x0 >; }; - pinctrl_ecspi3_cs: ecspi3-cs-grp { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 + MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */ + MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */ >; }; - pinctrl_ecspi3: ecspi3-grp { + pinctrl_flexcan2: flexcan2grp { fsl,pins = < - MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 - MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 - MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */ + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */ >; }; - pinctrl_flexcan1: flexcan1-grp { + pinctrl_gpio1: gpio1grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */ + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */ + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */ + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */ + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */ + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ + MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */ + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */ + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */ + MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */ + MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */ + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ + MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */ + MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */ + MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */ + MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ + MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */ + MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ + MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */ + MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */ + MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */ + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ + MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x14 /* SODIMM 169 */ + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */ + MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */ + MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ + MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ + MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ >; }; - pinctrl_flexcan2: flexcan2-grp { + pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */ fsl,pins = < - MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */ - MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */ + MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */ + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */ + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */ + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */ + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */ + MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */ + MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x74 /* SODIMM 69 */ + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */ + >; + }; + + pinctrl_gpio3: gpio3grp { /* LCD 18-23 */ + fsl,pins = < + MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */ + MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ + MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74 /* SODIMM 144 */ + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x74 /* SODIMM 146 */ + >; + }; + + pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */ + fsl,pins = < + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */ + MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */ + >; + }; + + pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */ + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ >; }; - pinctrl_gpio_bl_on: gpio-bl-on { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ >; }; - pinctrl_gpmi_nand: gpmi-nand-grp { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < - MX7D_PAD_SD3_CLK__NAND_CLE 0x71 - MX7D_PAD_SD3_CMD__NAND_ALE 0x71 MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71 MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74 - MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 - MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 + MX7D_PAD_SD3_CLK__NAND_CLE 0x71 + MX7D_PAD_SD3_CMD__NAND_ALE 0x71 MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71 MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71 MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71 @@ -669,13 +836,21 @@ MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71 MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71 MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71 + MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 + MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 >; }; - pinctrl_i2c4: i2c4-grp { + pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */ fsl,pins = < - MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f - MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f /* SODIMM 196 */ + MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f /* SODIMM 194 */ >; }; @@ -686,155 +861,176 @@ >; }; - pinctrl_lcdif_dat: lcdif-dat-grp { + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 /* SODIMM 76 */ + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 /* SODIMM 70 */ + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 /* SODIMM 60 */ + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 /* SODIMM 58 */ + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 /* SODIMM 78 */ + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 /* SODIMM 72 */ + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 /* SODIMM 80 */ + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 /* SODIMM 46 */ + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 /* SODIMM 62 */ + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 /* SODIMM 48 */ + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 /* SODIMM 74 */ + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 /* SODIMM 50 */ + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 /* SODIMM 52 */ + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 /* SODIMM 54 */ + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 /* SODIMM 66 */ + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 /* SODIMM 64 */ + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 /* SODIMM 57 */ + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 /* SODIMM 61 */ + >; + }; + + pinctrl_lcdif_dat_24: lcdifdat24grp { fsl,pins = < - MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 - MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 - MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 - MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 - MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 - MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 - MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 - MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 - MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 - MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 - MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 - MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 - MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 - MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 - MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 - MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 - MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 - MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 /* SODIMM 136 */ + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 /* SODIMM 138 */ + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 /* SODIMM 140 */ + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 /* SODIMM 142 */ + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 /* SODIMM 144 */ + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 /* SODIMM 146 */ >; }; - pinctrl_lcdif_dat_24: lcdif-dat-24-grp { + pinctrl_lcdif_ctrl: lcdifctrlgrp { fsl,pins = < - MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 - MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 - MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 - MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 - MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 - MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 /* SODIMM 56 */ + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 /* SODIMM 44 */ + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 /* SODIMM 68 */ + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 /* SODIMM 82 */ >; }; - pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + pinctrl_lvds_transceiver: lvdstx { fsl,pins = < - MX7D_PAD_LCD_CLK__LCD_CLK 0x79 - MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 - MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 - MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ >; }; - pinctrl_pwm1: pwm1-grp { + pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 - MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4 + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4 /* SODIMM 59 */ + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 /* SODIMM 59 */ >; }; - pinctrl_pwm2: pwm2-grp { + pinctrl_pwm2: pwm2grp { fsl,pins = < - MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 /* SODIMM 28 */ >; }; - pinctrl_pwm3: pwm3-grp { + pinctrl_pwm3: pwm3grp { fsl,pins = < - MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 /* SODIMM 30 */ >; }; - pinctrl_pwm4: pwm4-grp { + pinctrl_pwm4: pwm4grp { fsl,pins = < - MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 - MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4 + MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4 /* SODIMM 67 */ + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 /* SODIMM 67 */ >; }; - pinctrl_uart1: uart1-grp { + pinctrl_uart1: uart1grp { fsl,pins = < - MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 - MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 - MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 - MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 + MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 /* SODIMM 25 */ + MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 /* SODIMM 27 */ + MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 /* SODIMM 35 */ + MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 /* SODIMM 33 */ >; }; - pinctrl_uart1_ctrl1: uart1-ctrl1-grp { + pinctrl_uart1_ctrl1: uart1ctrl1grp { fsl,pins = < - MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */ - MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */ + MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* SODIMM 23 / DTR */ + MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* SODIMM 31 / DCD */ >; }; - pinctrl_uart2: uart2-grp { + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 /* SODIMM 32 / CTS */ + MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 /* SODIMM 34 / RTS */ + MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 /* SODIMM 38 */ + MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 /* SODIMM 36 */ + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < - MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 - MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 - MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 - MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 + MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 /* SODIMM 21 */ + MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 /* SODIMM 19 */ >; }; - pinctrl_uart3: uart3-grp { + + pinctrl_usbc_det: usbcdetgrp { fsl,pins = < - MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 - MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 /* SODIMM 137 / USBC_DET */ >; }; - pinctrl_usbc_det: gpio-usbc-det { + pinctrl_usbh_reg: usbhreggrp { fsl,pins = < - MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 / USBH_PEN */ >; }; - pinctrl_usbh_reg: gpio-usbh-vbus { + pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 /* SODIMM 47 */ + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 /* SODIMM 190 */ + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 /* SODIMM 192 */ + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 /* SODIMM 49 */ + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 /* SODIMM 51 */ + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 /* SODIMM 53 */ >; }; - pinctrl_usdhc1: usdhc1-grp { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x59 - MX7D_PAD_SD1_CLK__SD1_CLK 0x19 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a >; }; - pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5a - MX7D_PAD_SD1_CLK__SD1_CLK 0x1a - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b >; }; - pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + /* Avoid backfeeding with removed card power. */ + pinctrl_usdhc1_sleep: usdhc1-slpgrp { fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5b - MX7D_PAD_SD1_CLK__SD1_CLK 0x1b - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + MX7D_PAD_SD1_CMD__SD1_CMD 0x10 + MX7D_PAD_SD1_CLK__SD1_CLK 0x10 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x10 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x10 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x10 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x10 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x59 MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 @@ -847,10 +1043,10 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a @@ -863,10 +1059,10 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < - MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b @@ -879,16 +1075,16 @@ >; }; - pinctrl_sai1: sai1-grp { + pinctrl_sai1: sai1grp { fsl,pins = < - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f >; }; - pinctrl_sai1_mclk: sai1grp_mclk { + pinctrl_sai1_mclk: sai1mclkgrp { fsl,pins = < MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f >; @@ -899,23 +1095,35 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_lpsr>; - pinctrl_gpio_lpsr: gpio1-grp { + pinctrl_cd_usdhc1: cdusdhc1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 - MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* SODIMM 43 / MMC_CD */ + >; + }; + + pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0 + >; + }; + + pinctrl_gpio_lpsr: gpiolpsrgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 /* SODIMM 135 */ + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 /* SODIMM 22 */ >; }; pinctrl_gpiokeys: gpiokeysgrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 /* SODIMM 45 / WAKE_UP */ >; }; - pinctrl_i2c1: i2c1-grp { + pinctrl_i2c1: i2c1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f >; }; @@ -926,16 +1134,10 @@ >; }; - pinctrl_cd_usdhc1: usdhc1-cd-grp { - fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ - >; - }; - - pinctrl_uart1_ctrl2: uart1-ctrl2-grp { + pinctrl_uart1_ctrl2: uart1ctrl2grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ - MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 /* SODIMM 37 / RI */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 /* SODIMM 29 / DSR */ >; }; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts index f3f0537..90aaeddf 100644 --- a/arch/arm/boot/dts/imx7d-colibri-aster.dts +++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG - * + * Copyright 2017-2022 Toradex */ /dts-v1/; @@ -10,11 +9,32 @@ / { model = "Toradex Colibri iMX7D on Aster Carrier Board"; - compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d", + compatible = "toradex,colibri-imx7d-aster", + "toradex,colibri-imx7d", "fsl,imx7d"; }; +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts index 2048027..3ec9ef6 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG + * Copyright 2017-2022 Toradex * */ @@ -11,10 +11,12 @@ / { model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board"; compatible = "toradex,colibri-imx7d-emmc-aster", - "toradex,colibri-imx7d-emmc", "fsl,imx7d"; + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; }; +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts index 8ee73c8..6d505cb 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ /dts-v1/; @@ -10,10 +10,12 @@ / { model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx7d-emmc-eval-v3", - "toradex,colibri-imx7d-emmc", "fsl,imx7d"; + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; }; +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts new file mode 100644 index 0000000..7347659 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-iris-v2", + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts new file mode 100644 index 0000000..5324c92 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-iris", + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi index af39e53..2fb4d21 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -1,18 +1,28 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ #include "imx7d.dtsi" #include "imx7-colibri.dtsi" / { + aliases { + /* Required to properly pass MAC addresses from bootloader. */ + ethernet0 = &fec1; + ethernet1 = &fec2; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; +&cpu1 { + cpu-supply = <®_DCDC2>; +}; + &gpio6 { gpio-line-names = "", "", @@ -39,10 +49,13 @@ "SODIMM_34"; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; }; +/* eMMC */ &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index 87b132bcd..c7a8b5a 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ /dts-v1/; @@ -9,11 +9,48 @@ / { model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; - compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", + compatible = "toradex,colibri-imx7d-eval-v3", + "toradex,colibri-imx7d", "fsl,imx7d"; }; +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM, PWM, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri USBH */ &usbotg2 { - vbus-supply = <®_usbh_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts new file mode 100644 index 0000000..5762f51 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7d-iris-v2", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map-hog { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; + +&gpio7 { + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; + + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* This turns the LVDS transceiver on */ + lvds-power-on-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-iris.dts b/arch/arm/boot/dts/imx7d-colibri-iris.dts new file mode 100644 index 0000000..9c63cb9 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-iris.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Iris Carrier Board"; + compatible = "toradex,colibri-imx7d-iris", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM, PWM, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index 219a040..531a45b 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -1,12 +1,18 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ #include "imx7d.dtsi" #include "imx7-colibri.dtsi" / { + aliases { + /* Required to properly pass MAC addresses from bootloader. */ + ethernet0 = &fec1; + ethernet1 = &fec2; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; @@ -17,10 +23,13 @@ cpu-supply = <®_DCDC2>; }; +/* NAND */ &gpmi { status = "okay"; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f053f51..78f4224 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -201,7 +201,7 @@ compatible = "ti,tsc2046"; reg = <0>; spi-max-frequency = <1000000>; - pinctrl-names ="default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts index c6b3206..546268b 100644 --- a/arch/arm/boot/dts/imx7d-smegw01.dts +++ b/arch/arm/boot/dts/imx7d-smegw01.dts @@ -207,7 +207,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; no-1-8-v; - enable-sdio-wakeup; + wakeup-source; keep-power-in-suspend; status = "okay"; }; @@ -216,12 +216,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; + no-1-8-v; non-removable; - cap-sd-highspeed; - sd-uhs-ddr50; - mmc-ddr-1_8v; vmmc-supply = <®_wifi>; - enable-sdio-wakeup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index f8cba475..7ceb7c0 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -78,7 +78,7 @@ #phy-cells = <0>; }; - soc { + soc: soc { etm@3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x3007d000 0x1000>; diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts index fca4e0a..58ebb02d 100644 --- a/arch/arm/boot/dts/imx7s-colibri-aster.dts +++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017-2020 Toradex AG + * Copyright 2017-2022 Toradex * */ @@ -10,6 +10,27 @@ / { model = "Toradex Colibri iMX7S on Aster Carrier Board"; - compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s", + compatible = "toradex,colibri-imx7s-aster", + "toradex,colibri-imx7s", "fsl,imx7s"; }; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts index aa70d3f..38de766 100644 --- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ /dts-v1/; @@ -9,6 +9,43 @@ / { model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3"; - compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s", + compatible = "toradex,colibri-imx7s-eval-v3", + "toradex,colibri-imx7s", "fsl,imx7s"; }; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM, PWM, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts new file mode 100644 index 0000000..72b5c17 --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7s-iris-v2", + "toradex,colibri-imx7s", + "fsl,imx7s"; +}; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map-hog { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; + +&gpio7 { + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; + + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* This turns the LVDS transceiver on */ + lvds-power-on-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-iris.dts b/arch/arm/boot/dts/imx7s-colibri-iris.dts new file mode 100644 index 0000000..26ba72c --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-iris.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Iris Carrier Board"; + compatible = "toradex,colibri-imx7s-iris", + "toradex,colibri-imx7s", + "fsl,imx7s"; +}; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM, PWM, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi index 94de220..ef51395 100644 --- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2016-2020 Toradex + * Copyright 2016-2022 Toradex */ #include "imx7s.dtsi" @@ -13,6 +13,7 @@ }; }; +/* NAND */ &gpmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 008e3da..2914828 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -120,6 +120,7 @@ compatible = "usb-nop-xceiv"; clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; clock-names = "main_clk"; + power-domains = <&pgc_hsic_phy>; #phy-cells = <0>; }; @@ -175,7 +176,7 @@ ; }; - soc { + soc: soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -1153,7 +1154,6 @@ compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b30000 0x200>; interrupts = ; - power-domains = <&pgc_hsic_phy>; clocks = <&clks IMX7D_USB_CTRL_CLK>; fsl,usbphy = <&usbphynop3>; fsl,usbmisc = <&usbmisc3 0>; diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi index 77b911b..03e6a85 100644 --- a/arch/arm/boot/dts/imxrt1050.dtsi +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -83,7 +83,7 @@ }; usdhc1: mmc@402c0000 { - compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; reg = <0x402c0000 0x4000>; interrupts = <110>; clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, @@ -95,7 +95,7 @@ no-1-8-v; max-frequency = <4000000>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index 7106448..42cf74d 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x2000>; - linkram0 = <0x100000 0x4000>; - linkram1 = <0 0x10000>; + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0 0x10000>; qmgrs { #address-cells = <1>; @@ -176,40 +176,40 @@ netcp: netcp@24000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <1>; - phy-handle = <ðphy0>; + link-interface = <1>; + phy-handle = <ðphy0>; }; gbe1: interface-1 { slave-port = <1>; - link-interface = <1>; - phy-handle = <ðphy1>; + link-interface = <1>; + phy-handle = <ðphy1>; }; }; secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; port-4 { slave-port = <4>; - link-interface = <2>; + link-interface = <2>; }; port-5 { slave-port = <5>; - link-interface = <2>; + link-interface = <2>; }; port-6 { slave-port = <6>; - link-interface = <2>; + link-interface = <2>; }; port-7 { slave-port = <7>; - link-interface = <2>; + link-interface = <2>; }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index b8f152e7..65c3294 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -141,7 +141,7 @@ clock-names = "pcie"; #address-cells = <3>; #size-cells = <2>; - reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; + reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; ranges = <0x82000000 0 0x60000000 0x60000000 0 0x10000000>; @@ -185,14 +185,14 @@ }; mdio: mdio@24200f00 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x24200f00 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2e-netcp.dtsi" }; diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi index d0e6a9a..f630693 100644 --- a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi @@ -125,7 +125,7 @@ netcp: netcp@4000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <5>; + link-interface = <5>; }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 3719829..380dd9d 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -262,7 +262,7 @@ */ ti,system-reboot-controller; mbox-names = "rx", "tx"; - mboxes= <&msgmgr 5 2>, + mboxes = <&msgmgr 5 2>, <&msgmgr 0 0>; reg-names = "debug_messages"; reg = <0x02921c00 0x400>; @@ -326,13 +326,13 @@ dss: dss@02540000 { compatible = "ti,k2g-dss"; - reg = <0x02540000 0x400>, + reg = <0x02540000 0x400>, <0x02550000 0x1000>, <0x02557000 0x1000>, <0x0255a800 0x100>, <0x0255ac00 0x100>; reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; - clocks = <&k2g_clks 0x2 0>, + clocks = <&k2g_clks 0x2 0>, <&k2g_clks 0x2 1>; clock-names = "fck", "vp1"; interrupts = ; @@ -348,7 +348,7 @@ edma0: edma@2700000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; - reg = <0x02700000 0x8000>; + reg = <0x02700000 0x8000>; reg-names = "edma3_cc"; interrupts = , , @@ -367,19 +367,19 @@ edma0_tptc0: tptc@2760000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x02760000 0x400>; + reg = <0x02760000 0x400>; power-domains = <&k2g_pds 0x3f>; }; edma0_tptc1: tptc@2768000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x02768000 0x400>; + reg = <0x02768000 0x400>; power-domains = <&k2g_pds 0x3f>; }; edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; - reg = <0x02728000 0x8000>; + reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; interrupts = , , @@ -402,13 +402,13 @@ edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x027b0000 0x400>; + reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; edma1_tptc1: tptc@27b8000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; - reg = <0x027b8000 0x400>; + reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index 022d93c..8a421c6 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x4000>; - linkram0 = <0x100000 0x8000>; - linkram1 = <0x0 0x10000>; + queue-range = <0 0x4000>; + linkram0 = <0x100000 0x8000>; + linkram1 = <0x0 0x10000>; qmgrs { #address-cells = <1>; @@ -150,7 +150,7 @@ netcp: netcp@2000000 { #size-cells = <1>; /* NetCP address range */ - ranges = <0 0x2000000 0x100000>; + ranges = <0 0x2000000 0x100000>; clocks = <&clkpa>, <&clkcpgmac>; clock-names = "pa_clk", "ethss_clk"; @@ -207,11 +207,11 @@ netcp: netcp@2000000 { secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index 8a94477..da6d393 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -282,14 +282,14 @@ }; mdio: mdio@2090300 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x02090300 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2hk-netcp.dtsi" }; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index e96ca66..5ec6680 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -12,9 +12,9 @@ qmss: qmss@2a40000 { #size-cells = <1>; clocks = <&chipclk13>; ranges; - queue-range = <0 0x2000>; - linkram0 = <0x100000 0x4000>; - linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ qmgrs { #address-cells = <1>; @@ -174,24 +174,24 @@ netcp: netcp@26000000 { interfaces { gbe0: interface-0 { slave-port = <0>; - link-interface = <1>; - phy-handle = <ðphy0>; + link-interface = <1>; + phy-handle = <ðphy0>; }; gbe1: interface-1 { slave-port = <1>; - link-interface = <1>; - phy-handle = <ðphy1>; + link-interface = <1>; + phy-handle = <ðphy1>; }; }; secondary-slave-ports { port-2 { slave-port = <2>; - link-interface = <2>; + link-interface = <2>; }; port-3 { slave-port = <3>; - link-interface = <2>; + link-interface = <2>; }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index dff5fea7..421a02b 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -47,7 +47,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02348400 0x100>; - clocks = <&clkuart2>; + clocks = <&clkuart2>; interrupts = ; }; @@ -57,7 +57,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02348800 0x100>; - clocks = <&clkuart3>; + clocks = <&clkuart3>; interrupts = ; }; @@ -388,14 +388,14 @@ }; mdio: mdio@26200f00 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x26200f00 0x100>; status = "disabled"; clocks = <&clkcpgmac>; clock-names = "fck"; - bus_freq = <2500000>; + bus_freq = <2500000>; }; /include/ "keystone-k2l-netcp.dtsi" }; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index fc9fdc8..50789f9 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -14,7 +14,7 @@ interrupt-parent = <&gic>; aliases { - serial0 = &uart0; + serial0 = &uart0; spi0 = &spi0; spi1 = &spi1; spi2 = &spi2; @@ -61,11 +61,11 @@ }; psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; }; soc0: soc@0 { @@ -119,7 +119,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02530c00 0x100>; - clocks = <&clkuart0>; + clocks = <&clkuart0>; interrupts = ; }; @@ -129,7 +129,7 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02531000 0x100>; - clocks = <&clkuart1>; + clocks = <&clkuart1>; interrupts = ; }; @@ -301,7 +301,7 @@ clock-names = "pcie"; #address-cells = <3>; #size-cells = <2>; - reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; + reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; ranges = <0x82000000 0 0x50000000 0x50000000 0 0x10000000>; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi index 4cab1b3..0097e72 100644 --- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi @@ -76,6 +76,12 @@ pins = "GPIO_25", "GPIO_26"; function = "fc0_b"; }; + + usbs_a_pins: usbs-a-pins { + /* VBUS_DET */ + pins = "GPIO_66"; + function = "gpio"; + }; }; &mdio0 { @@ -87,22 +93,22 @@ phy4: ethernet-phy@5 { reg = <5>; - coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; }; phy5: ethernet-phy@6 { reg = <6>; - coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; }; phy6: ethernet-phy@7 { reg = <7>; - coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; }; phy7: ethernet-phy@8 { reg = <8>; - coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>; }; }; @@ -185,6 +191,13 @@ status = "okay"; }; +&udc { + pinctrl-0 = <&usbs_a_pins>; + pinctrl-names = "default"; + atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + &watchdog { status = "okay"; }; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index 3c7e3a7..24d9055 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -4,6 +4,7 @@ */ /dts-v1/; #include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" / { model = "Microchip EVB - LAN9662"; @@ -16,22 +17,18 @@ aliases { serial0 = &usart3; }; -}; - -&gpio { - fc_shrd7_pins: fc_shrd7-pins { - pins = "GPIO_49"; - function = "fc_shrd7"; - }; - fc_shrd8_pins: fc_shrd8-pins { - pins = "GPIO_54"; - function = "fc_shrd8"; + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; }; +}; - fc3_b_pins: fcb3-spi-pins { - /* SCK, RXD, TXD */ - pins = "GPIO_51", "GPIO_52", "GPIO_53"; +&gpio { + fc3_b_pins: fc3-b-pins { + /* RX, TX */ + pins = "GPIO_52", "GPIO_53"; function = "fc3_b"; }; @@ -45,7 +42,7 @@ &can0 { pinctrl-0 = <&can0_b_pins>; pinctrl-names = "default"; - status = "okay"; + status = "disabled"; /* Conflict with switch */ }; &flx3 { @@ -53,12 +50,46 @@ status = "okay"; usart3: serial@200 { - pinctrl-0 = <&fc3_b_pins>, <&fc_shrd7_pins>, <&fc_shrd8_pins>; + pinctrl-0 = <&fc3_b_pins>; pinctrl-names = "default"; status = "okay"; }; }; +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phy-handle = <&phy0>; + phy-mode = "gmii"; + phys = <&serdes 0 CU(0)>; + status = "okay"; +}; + +&port1 { + phy-handle = <&phy1>; + phy-mode = "gmii"; + phys = <&serdes 1 CU(1)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + &watchdog { status = "okay"; }; diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts new file mode 100644 index 0000000..05ce27e --- /dev/null +++ b/arch/arm/boot/dts/lan966x-pcb8309.dts @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * lan966x_pcb8309.dts - Device Tree file for PCB8309 + */ +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + model = "Microchip EVB - LAN9662"; + compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966"; + + aliases { + serial0 = &usart3; + i2c102 = &i2c102; + i2c103 = &i2c103; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; + + i2c-mux { + compatible = "i2c-mux"; + #address-cells = <1>; + #size-cells = <0>; + mux-controls = <&mux>; + i2c-parent = <&i2c4>; + + i2c102: i2c-sfp@1 { + reg = <1>; + }; + + i2c103: i2c-sfp@2 { + reg = <2>; + }; + }; + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */ + <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */ + }; + + sfp2: sfp2 { + compatible = "sff,sfp"; + i2c-bus = <&i2c102>; + tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in 2 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 2 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>; + }; + + sfp3: sfp3 { + compatible = "sff,sfp"; + i2c-bus = <&i2c103>; + tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in 3 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 3 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&flx3 { + atmel,flexcom-mode = ; + status = "okay"; + + usart3: serial@200 { + pinctrl-0 = <&fc3_b_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c4: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = ; + clocks = <&nic_clk>; + pinctrl-0 = <&fc4_b_pins>; + pinctrl-names = "default"; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + i2c-sda-hold-time-ns = <1500>; + status = "okay"; + }; +}; + +&gpio { + fc3_b_pins: fc3-b-pins { + /* RXD, TXD */ + pins = "GPIO_52", "GPIO_53"; + function = "fc3_b"; + }; + + fc4_b_pins: fc4-b-pins { + /* SCL, SDA */ + pins = "GPIO_57", "GPIO_58"; + function = "fc4_b"; + }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1, LD */ + pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; + function = "sgpio_a"; + }; +}; + +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phy-handle = <&phy0>; + phy-mode = "gmii"; + phys = <&serdes 0 CU(0)>; + status = "okay"; +}; + +&port1 { + phy-handle = <&phy1>; + phy-mode = "gmii"; + phys = <&serdes 1 CU(1)>; + status = "okay"; +}; + +&port2 { + sfp = <&sfp2>; + managed = "in-band-status"; + phy-mode = "sgmii"; + phys = <&serdes 2 SERDES6G(0)>; + status = "okay"; +}; + +&port3 { + sfp = <&sfp3>; + managed = "in-band-status"; + phy-mode = "sgmii"; + phys = <&serdes 3 SERDES6G(1)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&sgpio { + pinctrl-0 = <&sgpio_a_pins>; + pinctrl-names = "default"; + microchip,sgpio-port-ranges = <0 3>, <8 11>; + status = "okay"; + + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&switch { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index 3cb02ff..894bf9d 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -38,7 +38,7 @@ sys_clk: sys_clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <162500000>; + clock-frequency = <165625000>; }; cpu_clk: cpu_clk { @@ -65,7 +65,7 @@ #clock-cells = <1>; clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>; clock-names = "cpu", "ddr", "sys"; - reg = <0xe00c00a8 0x38>; + reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>; }; timer { @@ -84,6 +84,17 @@ #size-cells = <1>; ranges; + udc: usb@200000 { + compatible = "microchip,lan9662-udc", + "atmel,sama5d3-udc"; + reg = <0x00200000 0x80000>, + <0xe0808000 0x400>; + interrupts = ; + clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + switch: switch@e0000000 { compatible = "microchip,lan966x-switch"; reg = <0xe0000000 0x0100000>, @@ -473,6 +484,21 @@ status = "disabled"; }; + can1: can@e0820000 { + compatible = "bosch,m_can"; + reg = <0xe0820000 0xfc>, <0x00100000 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&clks GCK_ID_MCAN1>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>; + status = "disabled"; + }; + reset: reset-controller@e200400c { compatible = "microchip,lan966x-switch-reset"; reg = <0xe200400c 0x4>; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 10b8249..1bb686a 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -121,7 +121,7 @@ status = "disabled"; }; - usb0: ehci@40006100 { + usb0: usb@40006100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40006100 0x100>; interrupts = <8>; @@ -133,7 +133,7 @@ status = "disabled"; }; - usb1: ehci@40007100 { + usb1: usb@40007100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40007100 0x100>; interrupts = <9>; @@ -183,7 +183,7 @@ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; reg = <0x40010000 0x2000>; interrupts = <5>; - interrupt-names = "macirq"; + interrupt-names = "macirq"; clocks = <&ccu1 CLK_CPU_ETHERNET>; clock-names = "stmmaceth"; resets = <&rgu 22>; diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts index 66bcdaf..ce8e26d 100644 --- a/arch/arm/boot/dts/ls1021a-iot.dts +++ b/arch/arm/boot/dts/ls1021a-iot.dts @@ -142,7 +142,7 @@ }; sgtl5000: audio-codec@2a { - #sound-dai-cells=<0x0>; + #sound-dai-cells = <0x0>; compatible = "fsl,sgtl5000"; reg = <0x2a>; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 6c88be2a..fa76162 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -129,6 +129,13 @@ status = "disabled"; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen 4 3>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1021a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x1000>; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 26eaba3..8e3860d 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -214,14 +214,14 @@ ranges = <0x0 0xc8100000 0x100000>; ao_arc_rproc: remoteproc@1c { - compatible= "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson-mx-ao-arc"; reg = <0x1c 0x8>, <0x38 0x8>; reg-names = "remap", "cpu"; status = "disabled"; }; ir_receiver: ir-receiver@480 { - compatible= "amlogic,meson6-ir"; + compatible = "amlogic,meson6-ir"; reg = <0x480 0x20>; interrupts = ; status = "disabled"; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 9997a5d..0f8bac8 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -430,7 +430,7 @@ }; &ao_arc_rproc { - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; amlogic,secbus2 = <&secbus2>; sram = <&ao_arc_sram>; resets = <&reset RESET_MEDIA_CPU>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 94f1c03..cf9c04a 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -384,7 +384,7 @@ }; &ao_arc_rproc { - compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc"; amlogic,secbus2 = <&secbus2>; sram = <&ao_arc_sram>; resets = <&reset RESET_MEDIA_CPU>; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index ef583cf..b8eba3ba 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -427,9 +427,9 @@ afe: audio-controller { compatible = "mediatek,mt2701-audio"; - interrupts = , + interrupts = , ; - interrupt-names = "afe", "asys"; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, @@ -559,7 +559,7 @@ compatible = "mediatek,mt2701-jpgdec"; reg = <0 0x15004000 0 0x1000>; interrupts = ; - clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, <&imgsys CLK_IMG_JPGDEC>; clock-names = "jpgdec-smi", "jpgdec"; @@ -573,7 +573,7 @@ "mediatek,mtk-jpgenc"; reg = <0 0x1500a000 0 0x1000>; interrupts = ; - clocks = <&imgsys CLK_IMG_VENC>; + clocks = <&imgsys CLK_IMG_VENC>; clock-names = "jpgenc"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index f484836..25d31e4 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -241,7 +241,7 @@ }; pericfg: syscon@10003000 { - compatible = "mediatek,mt7623-pericfg", + compatible = "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"; reg = <0 0x10003000 0 0x1000>; @@ -628,9 +628,9 @@ afe: audio-controller { compatible = "mediatek,mt7623-audio", "mediatek,mt2701-audio"; - interrupts = , + interrupts = , ; - interrupt-names = "afe", "asys"; + interrupt-names = "afe", "asys"; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts index 13c8693..e8b4b6d 100644 --- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts +++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts @@ -45,13 +45,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = ; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = ; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts index 88d8f0b..61f5da6 100644 --- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts +++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts @@ -45,13 +45,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = ; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = ; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 027c1b0..5008115 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -91,13 +91,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = ; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = ; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts index 1b9b9a8..bf67a8e 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts @@ -60,13 +60,13 @@ pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; - factory { + button-factory { label = "factory"; linux,code = ; gpios = <&pio 256 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = ; gpios = <&pio 257 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index eb536cb..84e14be 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -23,13 +23,13 @@ gpio-keys { compatible = "gpio-keys"; - reset { + button-reset { label = "factory"; linux,code = ; gpios = <&pio 60 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = ; gpios = <&pio 58 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi index 3696980..c7b5ef1 100644 --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi @@ -110,6 +110,7 @@ compatible = "nuvoton,npcm750-reset"; reg = <0xf0801000 0x70>; #reset-cells = <2>; + nuvoton,sysgcr = <&gcr>; }; clk: clock-controller@f0801000 { @@ -128,7 +129,7 @@ interrupts = ; interrupt-names = "macirq"; ethernet = <0>; - clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; + clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>; clock-names = "stmmaceth", "clk_gmac"; pinctrl-names = "default"; pinctrl-0 = <&rg1_pins diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi index 13eee0f..30eed40 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi @@ -51,7 +51,7 @@ interrupts = ; interrupt-names = "macirq"; ethernet = <1>; - clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>; + clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>; clock-names = "stmmaceth", "clk_gmac"; pinctrl-names = "default"; pinctrl-0 = <&rg2_pins diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index af964f1..5acf5dd 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -21,7 +21,7 @@ nor@0,0 { compatible = "cfi-flash"; - linux,mtd-name= "intel,ge28f256l18b85"; + linux,mtd-name = "intel,ge28f256l18b85"; #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x04000000>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index c933219..abd403c 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -60,7 +60,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "hynix,h8kds0un0mer-4em"; + linux,mtd-name = "hynix,h8kds0un0mer-4em"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 5cc0cf7..f95eea6 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -60,7 +60,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f2g16abdhc"; + linux,mtd-name = "micron,mt29f2g16abdhc"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 0365f06..28a6a93 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -127,7 +127,7 @@ spi-cpol; spi-cpha; - backlight= <&backlight>; + backlight = <&backlight>; label = "lcd"; port { lcd_in: endpoint { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 99f5585..2192026 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -111,7 +111,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29c4g96maz"; + linux,mtd-name = "micron,mt29c4g96maz"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 9c6a927..36fc880 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -103,7 +103,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,nand"; + linux,mtd-name = "micron,nand"; nand-bus-width = <16>; gpmc,device-width = <2>; ti,nand-ecc-opt = "bch8"; @@ -215,11 +215,11 @@ }; &mmc2 { - status="disabled"; + status = "disabled"; }; &mmc3 { - status="disabled"; + status = "disabled"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 73d4778..c595afe 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -372,7 +372,7 @@ gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,wait-monitoring-ns = <0>; - gpmc,burst-length= <4>; + gpmc,burst-length = <4>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <100>; gpmc,cs-wr-off-ns = <100>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index d40c3d2..dd79715 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -568,8 +568,8 @@ }; &twl_gpio { - ti,pullups = <0x0>; - ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ + ti,pullups = <0x0>; + ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */ }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 7dde9fb..f68da82 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -162,8 +162,8 @@ }; &twl_gpio { - ti,pullups = <0x000001>; /* BIT(0) */ - ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ + ti,pullups = <0x000001>; /* BIT(0) */ + ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ }; &vdac { diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 006a6d9..adc714c 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -222,7 +222,7 @@ nand@0,0 { compatible = "ti,omap2-nand"; - linux,mtd-name= "micron,mt29c4g96maz"; + linux,mtd-name = "micron,mt29c4g96maz"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 37608af..5598537 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -666,7 +666,7 @@ lcd: lcd@1 { reg = <1>; /* CS1 */ - compatible = "tpo,td043mtea1"; + compatible = "tpo,td043mtea1"; spi-max-frequency = <100000>; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 7d530ae..258ecd9 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -53,7 +53,7 @@ nor@0,0 { compatible = "cfi-flash"; - linux,mtd-name= "intel,pf48f6000m0y1be"; + linux,mtd-name = "intel,pf48f6000m0y1be"; #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x08000000>; @@ -105,7 +105,7 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ - linux,mtd-name= "micron,mt29f1g08abb"; + linux,mtd-name = "micron,mt29f1g08abb"; #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "sw"; @@ -148,7 +148,7 @@ }; onenand@2,0 { - linux,mtd-name= "samsung,kfm2g16q2m-deb8"; + linux,mtd-name = "samsung,kfm2g16q2m-deb8"; #address-cells = <1>; #size-cells = <1>; compatible = "ti,omap2-onenand"; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 06cc3a1..3b505fe 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -482,7 +482,7 @@ clocks = <&usb_phy_cm_clk32k>, <&sys_clkin>, <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", + clock-names = "wkupclk", "sysclk", "refclk"; #phy-cells = <0>; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi index 8a6721d..147c991 100644 --- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi +++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi @@ -189,31 +189,31 @@ regulators { regulator-v3 { - regulator-compatible= "V3(DCDC)"; + regulator-compatible = "V3(DCDC)"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1800000>; }; regulator-v4 { - regulator-compatible= "V4(DCDC)"; + regulator-compatible = "V4(DCDC)"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1800000>; }; regulator-v5 { - regulator-compatible= "V5(LDO)"; + regulator-compatible = "V5(LDO)"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2000000>; }; reg_vcc_sdio: regulator-v6 { - regulator-compatible= "V6(LDO)"; + regulator-compatible = "V6(LDO)"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; regulator-v7 { - regulator-compatible= "V7(LDO)"; + regulator-compatible = "V7(LDO)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 138d647..70a1dd6 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) #include #include +#include #include #include #include "qcom-msm8660.dtsi" @@ -273,7 +274,7 @@ }; gpio@150 { - dragon_ethernet_gpios: ethernet-gpios { + dragon_ethernet_gpios: ethernet-state { pinconf { pins = "gpio7"; function = "normal"; @@ -282,7 +283,7 @@ power-source = ; }; }; - dragon_bmp085_gpios: bmp085-gpios { + dragon_bmp085_gpios: bmp085-state { pinconf { pins = "gpio16"; function = "normal"; @@ -291,7 +292,7 @@ power-source = ; }; }; - dragon_mpu3050_gpios: mpu3050-gpios { + dragon_mpu3050_gpios: mpu3050-state { pinconf { pins = "gpio17"; function = "normal"; @@ -300,7 +301,7 @@ power-source = ; }; }; - dragon_sdcc3_gpios: sdcc3-gpios { + dragon_sdcc3_gpios: sdcc3-state { pinconf { pins = "gpio22"; function = "normal"; @@ -309,7 +310,7 @@ power-source = ; }; }; - dragon_sdcc5_gpios: sdcc5-gpios { + dragon_sdcc5_gpios: sdcc5-state { pinconf { pins = "gpio26"; function = "normal"; @@ -319,7 +320,7 @@ power-source = ; }; }; - dragon_ak8975_gpios: ak8975-gpios { + dragon_ak8975_gpios: ak8975-state { pinconf { pins = "gpio33"; function = "normal"; @@ -328,9 +329,9 @@ power-source = ; }; }; - dragon_cm3605_gpios: cm3605-gpios { + dragon_cm3605_gpios: cm3605-state { /* Pin 34 connected to the proxy IRQ */ - pinconf_gpio34 { + gpio34-pins { pins = "gpio34"; function = "normal"; input-enable; @@ -338,7 +339,7 @@ power-source = ; }; /* Pin 35 connected to ASET */ - pinconf_gpio35 { + gpio35-pins { pins = "gpio35"; function = "normal"; output-high; @@ -346,7 +347,7 @@ power-source = ; }; }; - dragon_veth_gpios: veth-gpios { + dragon_veth_gpios: veth-state { pinconf { pins = "gpio40"; function = "normal"; @@ -416,6 +417,7 @@ compatible = "qcom,pm8058-led"; reg = <0x131>; label = "pm8058:red"; + color = ; default-state = "off"; }; led@132 { @@ -426,6 +428,7 @@ compatible = "qcom,pm8058-led"; reg = <0x132>; label = "pm8058:yellow"; + color = ; default-state = "off"; linux,default-trigger = "mmc0"; }; @@ -433,6 +436,8 @@ compatible = "qcom,pm8058-led"; reg = <0x133>; label = "pm8058:green"; + function = LED_FUNCTION_HEARTBEAT; + color = ; default-state = "on"; linux,default-trigger = "heartbeat"; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index ca9f735..fee278e 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -24,9 +24,9 @@ ramoops@88d00000{ compatible = "ramoops"; reg = <0x88d00000 0x100000>; - record-size = <0x00020000>; - console-size = <0x00020000>; - ftrace-size = <0x00020000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; }; }; @@ -44,12 +44,12 @@ gpio-keys { compatible = "gpio-keys"; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; linux,code = ; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>; linux,code = ; @@ -98,8 +98,8 @@ * tabla2x-slim-VDDIO_CDC */ s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; regulator-always-on; }; @@ -341,17 +341,17 @@ }; }; - imem@2a03f000 { - compatible = "syscon", "simple-mfd"; + sram@2a03f000 { + compatible = "qcom,apq8064-imem", "syscon", "simple-mfd"; reg = <0x2a03f000 0x1000>; reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x65c>; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index e068a8d..e3bf57c 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -82,8 +82,8 @@ }; s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; @@ -196,8 +196,8 @@ qcom,ssbi@500000 { pmic@0 { gpio@150 { - wlan_default_gpios: wlan-gpios { - pios { + wlan_default_gpios: wlan-gpios-state { + pinconf { pins = "gpio43"; function = "normal"; bias-disable; @@ -230,9 +230,9 @@ sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: mmc@121c0000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 2638b38..0322cb8 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-apq8064-v2.0.dtsi" #include +#include #include / { @@ -39,6 +40,7 @@ led@1 { label = "apq8064:green:user1"; + color = ; gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; default-state = "on"; }; @@ -108,8 +110,8 @@ }; s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; @@ -240,8 +242,8 @@ }; sata0: sata@29000000 { - status = "okay"; - target-supply = <&pm8921_s4>; + status = "okay"; + target-supply = <&pm8921_s4>; }; /* OTG */ @@ -291,8 +293,8 @@ qcom,ssbi@500000 { pmic@0 { gpio@150 { - wlan_default_gpios: wlan-gpios { - pios { + wlan_default_gpios: wlan-gpios-state { + pinconf { pins = "gpio43"; function = "normal"; bias-disable; @@ -300,8 +302,8 @@ }; }; - notify_led: nled { - pios { + notify_led: nled-state { + pinconf { pins = "gpio18"; function = "normal"; bias-disable; @@ -324,9 +326,9 @@ sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: mmc@121c0000 { @@ -341,7 +343,6 @@ status = "okay"; core-vdda-supply = <&pm8921_hdmi_switch>; - hdmi-mux-supply = <&ext_3p3v>; hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts index 0cee62c..c07c547 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -23,28 +23,28 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - camera-focus { + key-camera-focus { label = "camera_focus"; gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -334,7 +334,7 @@ qcom,ssbi@500000 { pmic@0 { gpio@150 { - gpio_keys_pin_a: gpio-keys-pin-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio3", "gpio4", "gpio29", "gpio35"; function = "normal"; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 34c0ba7..ada4c82 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -105,7 +105,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 7>; + thermal-sensors = <&tsens 7>; coefficients = <1199 0>; trips { @@ -126,7 +126,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 8>; + thermal-sensors = <&tsens 8>; coefficients = <1132 0>; trips { @@ -147,7 +147,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 9>; + thermal-sensors = <&tsens 9>; coefficients = <1199 0>; trips { @@ -168,7 +168,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&gcc 10>; + thermal-sensors = <&tsens 10>; coefficients = <1132 0>; trips { @@ -315,7 +315,7 @@ firmware { scm { - compatible = "qcom,scm-apq8064"; + compatible = "qcom,scm-apq8064", "qcom,scm"; clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; clock-names = "core"; @@ -430,8 +430,8 @@ }; sps_sic_non_secure: sps-sic-non-secure@12100000 { - compatible = "syscon"; - reg = <0x12100000 0x10000>; + compatible = "syscon"; + reg = <0x12100000 0x10000>; }; gsbi1: gsbi@12440000 { @@ -796,28 +796,37 @@ }; qfprom: qfprom@700000 { - compatible = "qcom,qfprom"; - reg = <0x00700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + compatible = "qcom,apq8064-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; ranges; - tsens_calib: calib { + tsens_calib: calib@404 { reg = <0x404 0x10>; }; - tsens_backup: backup_calib { + tsens_backup: backup_calib@414 { reg = <0x414 0x10>; }; }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-apq8064"; + compatible = "qcom,gcc-apq8064", "syscon"; reg = <0x00900000 0x4000>; - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; - #thermal-sensor-cells = <1>; + + tsens: thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = ; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; }; lcc: clock-controller@28000000 { @@ -836,23 +845,25 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; }; rpm@108000 { - compatible = "qcom,rpm-apq8064"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; + compatible = "qcom,rpm-apq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; - interrupts = , - , - ; - interrupt-names = "ack", "err", "wakeup"; + interrupts = , + , + ; + interrupt-names = "ack", "err", "wakeup"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; + compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; }; regulators { @@ -1004,39 +1015,39 @@ }; sata_phy0: phy@1b400000 { - compatible = "qcom,apq8064-sata-phy"; - status = "disabled"; - reg = <0x1b400000 0x200>; - reg-names = "phy_mem"; - clocks = <&gcc SATA_PHY_CFG_CLK>; - clock-names = "cfg"; - #phy-cells = <0>; + compatible = "qcom,apq8064-sata-phy"; + status = "disabled"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; }; sata0: sata@29000000 { - compatible = "qcom,apq8064-ahci", "generic-ahci"; - status = "disabled"; - reg = <0x29000000 0x180>; - interrupts = ; - - clocks = <&gcc SFAB_SATA_S_H_CLK>, - <&gcc SATA_H_CLK>, - <&gcc SATA_A_CLK>, - <&gcc SATA_RXOOB_CLK>, - <&gcc SATA_PMALIVE_CLK>; - clock-names = "slave_iface", - "iface", - "bus", - "rxoob", - "core_pmalive"; - - assigned-clocks = <&gcc SATA_RXOOB_CLK>, - <&gcc SATA_PMALIVE_CLK>; - assigned-clock-rates = <100000000>, <100000000>; - - phys = <&sata_phy0>; - phy-names = "sata-phy"; - ports-implemented = <0x1>; + compatible = "qcom,apq8064-ahci", "generic-ahci"; + status = "disabled"; + reg = <0x29000000 0x180>; + interrupts = ; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", + "iface", + "bus", + "rxoob", + "core_pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; }; /* Temporary fixed regulator */ @@ -1076,18 +1087,18 @@ #size-cells = <1>; ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pins>; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + pinctrl-names = "default"; + pinctrl-0 = <&sdcc1_pins>; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; + reg = <0x12400000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -1096,36 +1107,36 @@ }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <192000000>; + max-frequency = <192000000>; no-1-8-v; dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; dma-names = "tx", "rx"; }; sdcc4: mmc@121c0000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x121c0000 0x2000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <48000000>; + max-frequency = <48000000>; dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; @@ -1271,6 +1282,8 @@ syscon-sfpb = <&mmss_sfpb>; phys = <&dsi0_phy>; phy-names = "dsi"; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1299,9 +1312,10 @@ <0x04700300 0x200>, <0x04700500 0x5c>; reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; - clock-names = "iface_clk", "ref"; + clock-names = "iface", "ref"; clocks = <&mmcc DSI_M_AHB_CLK>, <&pxo_board>; + status = "disabled"; }; @@ -1420,7 +1434,6 @@ "slave_iface"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index da50a1a..72f9255 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -95,7 +95,7 @@ firmware { scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-apq8084", "qcom,scm"; clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; clock-names = "core", "bus", "iface"; }; @@ -240,10 +240,10 @@ }; qfprom: qfprom@fc4bc000 { + compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; #address-cells = <1>; #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; tsens_calib: calib@d0 { reg = <0xd0 0x18>; }; @@ -419,7 +419,7 @@ status = "disabled"; }; - sdhci@f9824900 { + mmc@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -432,7 +432,7 @@ status = "disabled"; }; - sdhci@f98a4900 { + mmc@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts index 028ac8e..cf7da1a 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include #include "qcom-ipq4018-ap120c-ac.dtsi" / { @@ -10,17 +11,22 @@ power { label = "ap120c-ac:green:power"; + function = LED_FUNCTION_POWER; + color = ; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "on"; }; wlan { label = "ap120c-ac:green:wlan"; + function = LED_FUNCTION_WLAN; + color = ; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; support { label = "ap120c-ac:green:support"; + color = ; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; panic-indicator; }; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts index b7916fc..c4f89b7 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include #include "qcom-ipq4018-ap120c-ac.dtsi" / { @@ -8,18 +9,24 @@ status: status { label = "ap120c-ac:blue:status"; + function = LED_FUNCTION_STATUS; + color = ; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "keep"; }; wlan2g { label = "ap120c-ac:green:wlan2g"; + function = LED_FUNCTION_WLAN; + color = ; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { label = "ap120c-ac:red:wlan5g"; + function = LED_FUNCTION_WLAN; + color = ; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi index 1f3b1ce..af9a26f 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -11,7 +11,7 @@ keys { compatible = "gpio-keys"; - reset { + key-reset { label = "reset"; gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index faeaa6b..44a9597 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -93,7 +93,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0>; - compatible = "n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index d596dd1..c7a6e77 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -56,7 +56,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0>; - compatible = "n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index c5da723..bb307b8 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -156,7 +156,7 @@ firmware { scm { - compatible = "qcom,scm-ipq4019"; + compatible = "qcom,scm-ipq4019", "qcom,scm"; }; }; @@ -221,7 +221,7 @@ status = "disabled"; }; - sdhci: sdhci@7824900 { + sdhci: mmc@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; interrupts = , ; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index b63d01d..a654d3c 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -7,12 +7,6 @@ soc { pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; - }; - buttons_pins: buttons_pins { mux { pins = "gpio54", "gpio65"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index 596d129..5a65cce 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" #include +#include / { model = "MikroTik RB3011UiAS-RM"; @@ -187,12 +188,12 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&buttons_pins>; pinctrl-names = "default"; - button@1 { + button { label = "reset"; linux,code = ; gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; @@ -208,6 +209,7 @@ led@7 { label = "rb3011:green:user"; + color = ; gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -305,15 +307,6 @@ }; }; - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - mdio1_pins: mdio1_pins { mux { pins = "gpio10", "gpio11"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi new file mode 100644 index 0000000..ac9c44f --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "qcom-ipq8064.dtsi" + +&rpm { + smb208_regulators: regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index 5c802b9..411c8d6 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" #include +#include / { model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; @@ -65,19 +66,19 @@ status = "okay"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&buttons_pins>; pinctrl-names = "default"; - button@1 { + button-1 { label = "reset"; linux,code = ; gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; linux,input-type = <1>; debounce-interval = <60>; }; - button@2 { + button-2 { label = "wps"; linux,code = ; gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; @@ -107,6 +108,7 @@ led@9 { label = "status_led_fail"; + function = LED_FUNCTION_STATUS; gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -119,6 +121,7 @@ led@53 { label = "status_led_pass"; + function = LED_FUNCTION_STATUS; gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; default-state = "off"; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 808ea18..c8337c8 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -292,8 +292,11 @@ }; smem: smem@41000000 { + compatible = "qcom,smem"; reg = <0x41000000 0x200000>; no-map; + + hwlocks = <&sfpb_mutex 3>; }; }; @@ -382,6 +385,13 @@ }; }; + i2c4_pins: i2c4-default { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + spi_pins: spi_pins { mux { pins = "gpio18", "gpio19", "gpio21"; @@ -424,6 +434,8 @@ pullups { pins = "gpio39"; + function = "nand"; + drive-strength = <10>; bias-pull-up; }; @@ -431,9 +443,32 @@ pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; bias-bus-hold; }; }; + + mdio0_pins: mdio0-pins { + mux { + pins = "gpio0", "gpio1"; + function = "mdio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2-pins { + mux { + pins = "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", + "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; }; intc: interrupt-controller@2000000 { @@ -507,6 +542,44 @@ regulator; }; + gsbi1: gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi1_serial: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = ; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + gsbi1_i2c: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <2>; @@ -530,7 +603,7 @@ status = "disabled"; }; - i2c@124a0000 { + gsbi2_i2c: i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; interrupts = ; @@ -631,6 +704,49 @@ }; }; + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16500000 0x100>; + cell-index = <6>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi6_i2c: i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = ; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + gsbi6_spi: spi@16580000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = ; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -652,6 +768,20 @@ clock-names = "core", "iface"; status = "disabled"; }; + + gsbi7_i2c: i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = ; + + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; }; rng@1a500000 { @@ -723,10 +853,13 @@ }; qfprom: qfprom@700000 { - compatible = "qcom,qfprom"; + compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; + speedbin_efuse: speedbin@c0 { + reg = <0xc0 0x4>; + }; tsens_calib: calib@400 { reg = <0x400 0xb>; }; @@ -773,6 +906,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&pxo_board>; + clock-names = "pxo"; }; }; @@ -784,7 +919,7 @@ l2cc: clock-controller@2011000 { compatible = "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; clock-output-names = "acpu_l2_aux"; }; @@ -810,7 +945,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ interrupts = ; @@ -861,7 +996,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = ; @@ -912,7 +1047,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = ; @@ -967,7 +1102,7 @@ gmac0: ethernet@37000000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37000000 0x200000>; interrupts = ; interrupt-names = "macirq"; @@ -991,7 +1126,7 @@ gmac1: ethernet@37200000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37200000 0x200000>; interrupts = ; interrupt-names = "macirq"; @@ -1015,7 +1150,7 @@ gmac2: ethernet@37400000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37400000 0x200000>; interrupts = ; interrupt-names = "macirq"; @@ -1039,7 +1174,7 @@ gmac3: ethernet@37600000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37600000 0x200000>; interrupts = ; interrupt-names = "macirq"; @@ -1113,6 +1248,8 @@ clocks = <&gcc USB30_1_UTMI_CLK>; clock-names = "ref"; #phy-cells = <0>; + + status = "disabled"; }; ss_phy_1: phy@110f8830 { @@ -1121,6 +1258,8 @@ clocks = <&gcc USB30_1_MASTER_CLK>; clock-names = "ref"; #phy-cells = <0>; + + status = "disabled"; }; usb3_1: usb3@110f8800 { @@ -1184,16 +1323,16 @@ ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x2000>; - interrupts = ; + reg = <0x12400000 0x2000>; + interrupts = ; interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -1204,18 +1343,18 @@ }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x2000>; - interrupts = ; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = ; interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <192000000>; + max-frequency = <192000000>; sd-uhs-sdr104; sd-uhs-ddr50; vqmmc-supply = <&vsdcc_fixed>; @@ -1223,5 +1362,12 @@ dma-names = "tx", "rx"; }; }; + + sfpb_mutex: hwlock@1200600 { + compatible = "qcom,sfpb-mutex"; + reg = <0x01200600 0x100>; + + #hwlock-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index 10ad9297..49de182 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -114,7 +114,7 @@ }; &pmicgpio { - usb_vbus_5v_pins: usb_vbus_5v_pins { + usb_vbus_5v_pins: usb-vbus-5v-state { pins = "gpio4"; function = "normal"; output-high; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 8f0752ce..b47c864 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -321,6 +321,7 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; + reg = <0x150>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; @@ -361,7 +362,7 @@ arm,primecell-periphid = <0x00051180>; reg = <0x12180000 0x2000>; interrupts = ; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <8>; @@ -381,7 +382,7 @@ status = "disabled"; reg = <0x12140000 0x2000>; interrupts = ; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; clock-names = "mclk", "apb_pclk"; bus-width = <4>; @@ -411,7 +412,7 @@ interrupts = , , ; - interrupt-names = "ack", "err", "wakeup"; + interrupt-names = "ack", "err", "wakeup"; regulators { compatible = "qcom,rpm-pm8018-regulators"; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 28eca15..0b5effd 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -134,7 +134,7 @@ reg = <0xf9011000 0x1000>; }; - sdhc_1: sdhci@f9824900 { + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -150,7 +150,7 @@ status = "disabled"; }; - sdhc_2: sdhci@f98a4900 { + sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -166,7 +166,7 @@ status = "disabled"; }; - sdhc_3: sdhci@f9864900 { + sdhc_3: mmc@f9864900 { compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 47b97da..63a501c 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -56,7 +56,7 @@ clock-frequency = <19200000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -392,25 +392,27 @@ }; l2cc: clock-controller@2082000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x02082000 0x1000>; + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x02082000 0x1000>; }; rpm: rpm@104000 { - compatible = "qcom,rpm-msm8660"; - reg = <0x00104000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; - - interrupts = , - , - ; - interrupt-names = "ack", "err", "wakeup"; + compatible = "qcom,rpm-msm8660"; + reg = <0x00104000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = , + , + ; + interrupt-names = "ack", "err", "wakeup"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; + compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc"; #clock-cells = <1>; + clocks = <&pxo_board>; + clock-names = "pxo"; }; pm8901-regulators { @@ -486,80 +488,80 @@ #size-cells = <1>; ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x8000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <48000000>; + reg = <0x12400000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; }; sdcc2: mmc@12140000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12140000 0x8000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <48000000>; + reg = <0x12140000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; cap-sd-highspeed; cap-mmc-highspeed; }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x8000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <48000000>; + max-frequency = <48000000>; no-1-8-v; }; sdcc4: mmc@121c0000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x121c0000 0x8000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; - max-frequency = <48000000>; + status = "disabled"; + reg = <0x121c0000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + max-frequency = <48000000>; cap-sd-highspeed; cap-mmc-highspeed; }; sdcc5: mmc@12200000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12200000 0x8000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12200000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <48000000>; + max-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 4a2d74c..19554f3 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -148,19 +148,19 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; - reg = <0x2011000 0x1000>; + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; }; rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; - interrupts = , - , - ; - interrupt-names = "ack", "err", "wakeup"; + interrupts = , + , + ; + interrupt-names = "ack", "err", "wakeup"; regulators { compatible = "qcom,rpm-pm8921-regulators"; @@ -268,16 +268,16 @@ #size-cells = <1>; ranges; sdcc1: mmc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - reg = <0x12400000 0x8000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <8>; - max-frequency = <96000000>; + reg = <0x12400000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -285,18 +285,18 @@ }; sdcc3: mmc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; - status = "disabled"; - reg = <0x12180000 0x8000>; - interrupts = ; - interrupt-names = "cmd_irq"; - clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; - clock-names = "mclk", "apb_pclk"; - bus-width = <4>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <192000000>; + max-frequency = <192000000>; no-1-8-v; vmmc-supply = <&vsdcc_fixed>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 9493886..ec5d340 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include +#include #include / { @@ -24,14 +25,14 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -272,7 +273,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3"; function = "normal"; @@ -280,7 +281,7 @@ power-source = ; }; - fuelgauge_pin: fuelgauge-int { + fuelgauge_pin: fuelgauge-int-state { pins = "gpio9"; function = "normal"; @@ -289,7 +290,7 @@ power-source = ; }; - wlan_sleep_clk_pin: wl-sleep-clk { + wlan_sleep_clk_pin: wl-sleep-clk-state { pins = "gpio16"; function = "func2"; @@ -297,7 +298,7 @@ power-source = ; }; - wlan_regulator_pin: wl-reg-active { + wlan_regulator_pin: wl-reg-active-state { pins = "gpio17"; function = "normal"; @@ -313,6 +314,35 @@ }; }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@7 { + reg = <7>; + color = ; + }; + + led@6 { + reg = <6>; + color = ; + }; + + led@5 { + reg = <5>; + color = ; + }; + }; +}; + &rpm_requests { pm8841-regulators { compatible = "qcom,rpm-pm8841-regulators"; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi index 1d21de4..5a70683 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include +#include #include / { @@ -20,28 +21,28 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - camera-focus { + key-camera-focus { label = "camera_focus"; gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -163,7 +164,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3", "gpio4", "gpio5"; function = "normal"; @@ -172,6 +173,35 @@ }; }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + rgb-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@5 { + reg = <5>; + color = ; + }; + + led@6 { + reg = <6>; + color = ; + }; + + led@7 { + reg = <7>; + color = ; + }; + }; +}; + &pm8941_wled { status = "okay"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 814ad0b..8baca2a 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -96,7 +96,7 @@ firmware { scm { - compatible = "qcom,scm"; + compatible = "qcom,scm-msm8974", "qcom,scm"; clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; clock-names = "core", "bus", "iface"; }; @@ -436,7 +436,7 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - sdhc_1: sdhci@f9824900 { + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -453,7 +453,7 @@ status = "disabled"; }; - sdhc_3: sdhci@f9864900 { + sdhc_3: mmc@f9864900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -472,7 +472,7 @@ status = "disabled"; }; - sdhc_2: sdhci@f98a4900 { + sdhc_2: mmc@f98a4900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -506,6 +506,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; status = "disabled"; }; @@ -578,9 +580,12 @@ blsp2_uart1: serial@f995d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995d000 0x1000>; - interrupts = ; + interrupts = ; clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; status = "disabled"; }; @@ -599,6 +604,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart4_default>; status = "disabled"; }; @@ -639,6 +646,9 @@ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; #address-cells = <1>; #size-cells = <0>; }; @@ -1118,10 +1128,10 @@ }; qfprom: qfprom@fc4bc000 { + compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; #address-cells = <1>; #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; tsens_calib: calib@d0 { reg = <0xd0 0x18>; }; @@ -1146,6 +1156,18 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@fc834000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xfc834000 0x7000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + }; + remoteproc_mss: remoteproc@fc880000 { compatible = "qcom,msm8974-mss-pil"; reg = <0xfc880000 0x100>, <0xfc820000 0x020>; @@ -1172,6 +1194,8 @@ qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; + status = "disabled"; + mba { memory-region = <&mba_region>; }; @@ -1180,6 +1204,20 @@ memory-region = <&mpss_region>; }; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&modem_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + }; + smd-edge { interrupts = ; @@ -1256,7 +1294,7 @@ }; }; - blsp1_uart2_active: blsp1-uart2-active { + blsp1_uart2_default: blsp1-uart2-default { rx { pins = "gpio5"; function = "blsp_uart2"; @@ -1272,7 +1310,7 @@ }; }; - blsp2_uart1_active: blsp2-uart1-active { + blsp2_uart1_default: blsp2-uart1-default { tx-rts { pins = "gpio41", "gpio44"; function = "blsp_uart7"; @@ -1295,7 +1333,7 @@ bias-pull-down; }; - blsp2_uart4_active: blsp2-uart4-active { + blsp2_uart4_default: blsp2-uart4-default { tx-rts { pins = "gpio53", "gpio56"; function = "blsp_uart10"; @@ -1406,7 +1444,19 @@ bias-pull-up; }; - /* BLSP2_I2C6 info is missing - nobody uses it though? */ + blsp2_i2c6_default: blsp2-i2c6-default { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; spi8_default: spi8_default { mosi { @@ -1586,7 +1636,7 @@ status = "disabled"; - gpu_opp_table: opp_table { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-320000000 { @@ -1603,11 +1653,12 @@ }; }; - ocmem@fdd00000 { + sram@fdd00000 { compatible = "qcom,msm8974-ocmem"; reg = <0xfdd00000 0x2000>, <0xfec00000 0x180000>; reg-names = "ctrl", "mem"; + ranges = <0 0xfec00000 0x180000>; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; clock-names = "core", "iface"; @@ -1639,6 +1690,8 @@ qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; + status = "disabled"; + smd-edge { interrupts = ; @@ -1650,8 +1703,8 @@ }; }; - imem: imem@fe805000 { - compatible = "syscon", "simple-mfd"; + imem: sram@fe805000 { + compatible = "qcom,msm8974-imem", "syscon", "simple-mfd"; reg = <0xfe805000 0x1000>; reboot-mode { diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts index 58cb2ce..ff6e006 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include +#include #include / { @@ -25,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; linux,code = ; @@ -33,7 +34,7 @@ debounce-interval = <15>; }; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,code = ; @@ -41,7 +42,7 @@ debounce-interval = <15>; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; linux,code = ; @@ -78,9 +79,9 @@ &imem { reboot-mode { - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; @@ -110,7 +111,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio1", "gpio2", "gpio5"; function = "normal"; @@ -119,6 +120,35 @@ }; }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@7 { + reg = <7>; + color = ; + }; + + led@6 { + reg = <6>; + color = ; + }; + + led@5 { + reg = <5>; + color = ; + }; + }; +}; + &pronto { status = "okay"; @@ -147,10 +177,12 @@ }; &remoteproc_adsp { + status = "okay"; cx-supply = <&pm8841_s2>; }; &remoteproc_mss { + status = "okay"; cx-supply = <&pm8841_s2>; mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts index d6b2300..983e10c 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -25,7 +25,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -33,7 +33,7 @@ debounce-interval = <15>; }; - home-key { + key-home { label = "home_key"; gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -42,7 +42,7 @@ debounce-interval = <15>; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -398,7 +398,7 @@ }; &pma8084_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio3", "gpio5"; function = "normal"; @@ -406,7 +406,7 @@ power-source = ; }; - touchkey_pin: touchkey-int-pin { + touchkey_pin: touchkey-int-state { pins = "gpio6"; function = "normal"; bias-disable; @@ -414,7 +414,7 @@ power-source = ; }; - touch_pin: touchscreen-int-pin { + touch_pin: touchscreen-int-state { pins = "gpio8"; function = "normal"; bias-disable; @@ -422,7 +422,7 @@ power-source = ; }; - panel_en_pin: panel-en-pin { + panel_en_pin: panel-en-state { pins = "gpio14"; function = "normal"; bias-pull-up; @@ -430,7 +430,7 @@ qcom,drive-strength = ; }; - wlan_sleep_clk_pin: wlan-sleep-clk-pin { + wlan_sleep_clk_pin: wlan-sleep-clk-state { pins = "gpio16"; function = "func2"; @@ -439,7 +439,7 @@ qcom,drive-strength = ; }; - panel_rst_pin: panel-rst-pin { + panel_rst_pin: panel-rst-state { pins = "gpio17"; function = "normal"; bias-disable; @@ -447,7 +447,7 @@ qcom,drive-strength = ; }; - fuelgauge_pin: fuelgauge-int-pin { + fuelgauge_pin: fuelgauge-int-state { pins = "gpio21"; function = "normal"; bias-disable; @@ -457,10 +457,12 @@ }; &remoteproc_adsp { + status = "okay"; cx-supply = <&pma8084_s2>; }; &remoteproc_mss { + status = "okay"; cx-supply = <&pma8084_s2>; mss-supply = <&pma8084_s6>; mx-supply = <&pma8084_s1>; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 9bd8fae..3f45f5c 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -3,6 +3,7 @@ #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" #include +#include #include / { @@ -24,28 +25,28 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pin_a>; - volume-down { + key-volume-down { label = "volume_down"; gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - camera-snapshot { + key-camera-snapshot { label = "camera_snapshot"; gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - camera-focus { + key-camera-focus { label = "camera_focus"; gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; }; - volume-up { + key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -244,7 +245,7 @@ }; &pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active { + gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio2", "gpio5"; function = "normal"; @@ -252,7 +253,7 @@ power-source = ; }; - bt_reg_on_pin: bt-reg-on { + bt_reg_on_pin: bt-reg-on-state { pins = "gpio16"; function = "normal"; @@ -260,7 +261,7 @@ power-source = ; }; - wlan_sleep_clk_pin: wl-sleep-clk { + wlan_sleep_clk_pin: wl-sleep-clk-state { pins = "gpio17"; function = "func2"; @@ -268,7 +269,7 @@ power-source = ; }; - wlan_regulator_pin: wl-reg-active { + wlan_regulator_pin: wl-reg-active-state { pins = "gpio18"; function = "normal"; @@ -276,7 +277,7 @@ power-source = ; }; - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state { pins = "gpio20"; function = "normal"; @@ -288,6 +289,35 @@ }; +&pm8941_lpg { + status = "okay"; + + qcom,power-source = <1>; + + rgb-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@5 { + reg = <5>; + color = ; + }; + + led@6 { + reg = <6>; + color = ; + }; + + led@7 { + reg = <7>; + color = ; + }; + }; +}; + &rpm_requests { pm8941-regulators { compatible = "qcom,rpm-pm8941-regulators"; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 2caf71e..b5cdde0 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -24,6 +24,7 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index cdd2bdb7..59d0cde 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -68,7 +68,7 @@ interrupt-controller; #interrupt-cells = <2>; - boost_bypass_n_pin: boost-bypass { + boost_bypass_n_pin: boost-bypass-state { pins = "gpio21"; function = "normal"; }; @@ -144,6 +144,16 @@ #address-cells = <1>; #size-cells = <0>; + pm8941_lpg: lpg { + compatible = "qcom,pm8941-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pm8941_wled: wled@d800 { compatible = "qcom,pm8941-wled"; reg = <0xd800>; diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi index 6571b88..9de7578 100644 --- a/arch/arm/boot/dts/qcom-pmx55.dtsi +++ b/arch/arm/boot/dts/qcom-pmx55.dtsi @@ -69,6 +69,7 @@ compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmx55_gpios 0 0 11>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi index 5411b83..abf229a 100644 --- a/arch/arm/boot/dts/qcom-pmx65.dtsi +++ b/arch/arm/boot/dts/qcom-pmx65.dtsi @@ -21,9 +21,10 @@ }; pmx65_gpios: pinctrl@8800 { - compatible = "qcom,pmx65-gpio"; + compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio"; reg = <0x8800>; gpio-controller; + gpio-ranges = <&pmx65_gpios 0 0 16>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index 1c2b208..c725402 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -206,7 +206,7 @@ blsp1_uart3: serial@831000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x00831000 0x200>; - interrupts = ; + interrupts = ; clocks = <&gcc 30>, <&gcc 9>; clock-names = "core", "iface"; @@ -388,7 +388,7 @@ reg = <0x01fc0000 0x1000>; }; - sdhc_1: sdhci@8804000 { + sdhc_1: mmc@8804000 { compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; interrupts = , @@ -561,8 +561,8 @@ #interrupt-cells = <2>; }; - imem@1468f000 { - compatible = "simple-mfd"; + sram@1468f000 { + compatible = "qcom,sdx55-imem", "syscon", "simple-mfd"; reg = <0x1468f000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index 79dc31a..85ea02d 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -64,10 +64,6 @@ }; }; -&blsp1_uart3 { - status = "ok"; -}; - &apps_rsc { pmx65-rpmh-regulators { compatible = "qcom,pmx65-rpmh-regulators"; @@ -123,7 +119,7 @@ regulator-max-microvolt = <1300000>; }; - ldo1 { + vreg_l1b_1p2: ldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; @@ -141,13 +137,13 @@ regulator-initial-mode = ; }; - ldo4 { + vreg_l4b_0p88: ldo4 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; - ldo5 { + vreg_l5b_1p8: ldo5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; @@ -177,7 +173,7 @@ regulator-initial-mode = ; }; - ldo10 { + vreg_l10b_3p08: ldo10 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; regulator-initial-mode = ; @@ -244,3 +240,52 @@ }; }; }; + +&blsp1_uart3 { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + /* ico and efs2 partitions are secured */ + secure-regions = /bits/ 64 <0x500000 0x500000 + 0xa00000 0xb00000>; + }; +}; + +&remoteproc_mpss { + status = "okay"; + memory-region = <&mpss_adsp_mem>; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4b_0p88>; + vdda33-supply = <&vreg_l10b_3p08>; + vdda18-supply = <&vreg_l5b_1p8>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4b_0p88>; + vdda-pll-supply = <&vreg_l1b_1p2>; +}; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index df6f9d6..8daefd5 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -37,6 +37,12 @@ clock-output-names = "sleep_clk"; #clock-cells = <0>; }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; }; cpus { @@ -48,9 +54,50 @@ compatible = "arm,cortex-a7"; reg = <0x0>; enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX65_CX_AO>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; }; }; + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx65", "qcom,scm"; + }; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sdx65-mc-virt"; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -87,8 +134,10 @@ }; smem_mem: memory@8fe20000 { - no-map; + compatible = "qcom,smem"; reg = <0x8fe20000 0xc0000>; + hwlocks = <&tcsr_mutex 3>; + no-map; }; cmd_db: reserved-memory@8fee0000 { @@ -113,6 +162,37 @@ }; }; + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -124,6 +204,7 @@ reg = <0x00100000 0x001f7400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; @@ -137,13 +218,120 @@ status = "disabled"; }; + usb_hsphy: phy@ff4000 { + compatible = "qcom,usb-snps-hs-7nm-phy"; + reg = <0xff4000 0x120>; + #phy-cells = <0>; + status = "disabled"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx65-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c8>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6e00 0x160>, + <0x00ff7000 0x1ec>, + <0x00ff6200 0x1e00>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sdx65-system-noc"; + reg = <0x01620000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = ; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand-controller@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x40000>; #hwlock-cells = <1>; }; - sdhc_1: sdhci@8804000 { + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX65_CX>, + <&rpmhpd SDX65_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + + sdhc_1: mmc@8804000 { compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; reg-names = "hc_mem"; @@ -156,6 +344,63 @@ status = "disabled"; }; + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx65-mem-noc"; + reg = <0x09680000 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 76 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 18 IRQ_TYPE_EDGE_BOTH>, + <&pdc 19 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + spmi_bus: qcom,spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0xd00>, @@ -196,6 +441,19 @@ interrupt-controller; }; + imem@1468f000 { + compatible = "simple-mfd"; + reg = <0x1468f000 0x1000>; + ranges = <0x0 0x1468f000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdx65-smmu-500", "arm,mmu-500"; reg = <0x15000000 0x40000>; @@ -262,6 +520,12 @@ #clock-cells = <0>; }; + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + timer@17820000 { #address-cells = <1>; #size-cells = <1>; @@ -399,6 +663,11 @@ }; }; }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; }; diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 9c0d968..69a5a44 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -71,10 +71,10 @@ leds { compatible = "gpio-leds"; - red { + led-red { gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; }; - green { + led-green { gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 57cd2fa..5ad5349 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -442,7 +442,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index c802f9f..fe14727 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -341,7 +341,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 6e691b6..26a4078 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -805,7 +805,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 38e2ab9..ec0a20d 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -390,7 +390,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index 62aa9f6..c66de9d 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -335,7 +335,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index c8978f4..79b537b 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -740,7 +740,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 99d554f..4d93319 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -463,7 +463,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 92a7616..b7af1be 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -433,7 +433,7 @@ compatible = "dlg,da9063-rtc"; }; - wdt { + watchdog { compatible = "dlg,da9063-watchdog"; }; }; diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi deleted file mode 100644 index 79fce67..0000000 --- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Common file for the AA104XD12 panel connected to Renesas R-Car boards - * - * Copyright (C) 2014 Renesas Electronics Corp. - */ - -/ { - panel { - compatible = "mitsubishi,aa104xd12", "panel-lvds"; - - width-mm = <210>; - height-mm = <158>; - data-mapping = "jeida-18"; - - panel-timing { - /* 1024x768 @65Hz */ - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hsync-len = <136>; - hfront-porch = <20>; - hback-porch = <160>; - vfront-porch = <3>; - vback-porch = <29>; - vsync-len = <6>; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds_connector>; - }; - }; - }; -}; - -&lvds_connector { - remote-endpoint = <&panel_in>; -}; diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts index 3f8f3ce..4bf8133 100644 --- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -8,6 +8,9 @@ /dts-v1/; +#include +#include + #include "r9a06g032.dtsi" / { @@ -23,6 +26,122 @@ }; }; +ð_miic { + status = "okay"; + renesas,miic-switch-portin = ; +}; + +&gmac2 { + status = "okay"; + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&mii_conv4 { + renesas,miic-input = ; + status = "okay"; +}; + +&mii_conv5 { + renesas,miic-input = ; + status = "okay"; +}; + +&pinctrl{ + pins_eth3: pins_eth3 { + pinmux = , + , + , + , + , + , + , + , + , + , + , + ; + drive-strength = <6>; + bias-disable; + }; + + pins_eth4: pins_eth4 { + pinmux = , + , + , + , + , + , + , + , + , + , + , + ; + drive-strength = <6>; + bias-disable; + }; + + pins_mdio1: pins_mdio1 { + pinmux = , + ; + }; +}; + +&rtc0 { + status = "okay"; +}; + +&switch { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>; + + dsa,member = <0 0>; + + mdio { + clock-frequency = <2500000>; + + #address-cells = <1>; + #size-cells = <0>; + + switch0phy4: ethernet-phy@4 { + reg = <4>; + micrel,led-mode = <1>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <5>; + micrel,led-mode = <1>; + }; + }; +}; + +&switch_port0 { + label = "lan0"; + phy-mode = "mii"; + phy-handle = <&switch0phy5>; + status = "okay"; +}; + +&switch_port1 { + label = "lan1"; + phy-mode = "mii"; + phy-handle = <&switch0phy4>; + status = "okay"; +}; + +&switch_port4 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index d366591..5b97fa8 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -304,6 +304,114 @@ data-width = <8>; }; + gmac2: ethernet@44002000 { + compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; + reg = <0x44002000 0x2000>; + interrupt-parent = <&gic>; + interrupts = , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + clocks = <&sysctrl R9A06G032_HCLK_GMAC1>; + clock-names = "stmmaceth"; + power-domains = <&sysctrl>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; + status = "disabled"; + }; + + eth_miic: eth-miic@44030000 { + compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x44030000 0x10000>; + clocks = <&sysctrl R9A06G032_CLK_MII_REF>, + <&sysctrl R9A06G032_CLK_RGMII_REF>, + <&sysctrl R9A06G032_CLK_RMII_REF>, + <&sysctrl R9A06G032_HCLK_SWITCH_RG>; + clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; + power-domains = <&sysctrl>; + status = "disabled"; + + mii_conv1: mii-conv@1 { + reg = <1>; + status = "disabled"; + }; + + mii_conv2: mii-conv@2 { + reg = <2>; + status = "disabled"; + }; + + mii_conv3: mii-conv@3 { + reg = <3>; + status = "disabled"; + }; + + mii_conv4: mii-conv@4 { + reg = <4>; + status = "disabled"; + }; + + mii_conv5: mii-conv@5 { + reg = <5>; + status = "disabled"; + }; + }; + + switch: switch@44050000 { + compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw"; + reg = <0x44050000 0x10000>; + clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, + <&sysctrl R9A06G032_CLK_SWITCH>; + clock-names = "hclk", "clk"; + power-domains = <&sysctrl>; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0>; + pcs-handle = <&mii_conv5>; + status = "disabled"; + }; + + switch_port1: port@1 { + reg = <1>; + pcs-handle = <&mii_conv4>; + status = "disabled"; + }; + + switch_port2: port@2 { + reg = <2>; + pcs-handle = <&mii_conv3>; + status = "disabled"; + }; + + switch_port3: port@3 { + reg = <3>; + pcs-handle = <&mii_conv2>; + status = "disabled"; + }; + + switch_port4: port@4 { + reg = <4>; + ethernet = <&gmac2>; + label = "cpu"; + phy-mode = "internal"; + status = "disabled"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + gic: interrupt-controller@44101000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 390aa33..962b4d1 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -48,7 +48,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ linux,code = ; label = "GPIO Key Power"; @@ -56,7 +56,7 @@ wakeup-source; debounce-interval = <100>; }; - volume-down { + key-volume-down { gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ linux,code = ; label = "GPIO Key Vol-"; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 667d57a..cfa318a 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -160,6 +160,24 @@ status = "okay"; }; +&nfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nand@0 { + reg = <0>; + label = "rk-nand"; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-step-size = <1024>; + nand-ecc-strength = <40>; + nand-is-boot-medium; + rockchip,boot-blks = <8>; + rockchip,boot-ecc-strength = <24>; + }; +}; + &pinctrl { usb-host { host_drv: host-drv { diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 12b2e59..dbbc517 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -32,7 +32,7 @@ keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { wakeup-source; gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index 35b7a57..9312be3 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key &usb_int>; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; @@ -46,7 +46,7 @@ wakeup-source; }; - wake_on_usb: wake-on-usb { + wake_on_usb: key-wake-on-usb { label = "Wake-on-USB"; gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index fc478ac..0a1ae68 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -29,7 +29,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 36c0945..a9ed3cd 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -24,7 +24,7 @@ compatible = "gpio-keys"; autorepeat; - power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 797476e..5c3d08e 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -107,7 +107,7 @@ regulator-boot-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index c4ca73b..399d6b9 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 9a4a974..a5a0826 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -27,7 +27,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 7fb5823..052afe5 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -49,7 +49,7 @@ keys: gpio-keys { compatible = "gpio-keys"; - power { + key-power { wakeup-source; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 1e33859..1a51569 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -20,14 +20,14 @@ pinctrl-names = "default"; pinctrl-0 = <&user_button_pins>; - button@0 { + button-0 { label = "home"; linux,code = ; gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; wakeup-source; }; - button@1 { + button-1 { label = "menu"; linux,code = ; gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 8c7376d..fd90f3b 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -30,7 +30,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 55467bc..633e5a0 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -31,7 +31,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index c4d1d142..80e0f07 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -28,7 +28,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = ; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 9c1e38c..09618bb 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -26,14 +26,12 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - button@0 { + button { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi index a10d25a..f9dde0e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi @@ -13,10 +13,10 @@ <&bt_dev_wake>; compatible = "brcm,bcm43540-bt"; - host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - max-speed = <3000000>; - brcm,bt-pcm-int-params = [01 02 00 01 01]; + host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 05112c2..700bb54 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -32,7 +32,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ap_lid_int_l>; - lid { + switch-lid { label = "Lid"; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; wakeup-source; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 82fc6fb..dcdcc55 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -21,14 +21,14 @@ pinctrl-names = "default"; pinctrl-0 = <&volum_down_l &volum_up_l>; - volum_down { + key-volum-down { label = "Volum_down"; gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <100>; }; - volum_up { + key-volum-up { label = "Volum_up"; gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 4e9fdb0..e2a4e62 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -45,7 +45,7 @@ &lid_switch { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; - power { + key-power { gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 54a6838..e406c8c 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -29,7 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; - power { + key-power { label = "Power"; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts index 0c99a59..2d99943 100644 --- a/arch/arm/boot/dts/rv1108-elgin-r1.dts +++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts @@ -83,7 +83,7 @@ regulators { vdd_core: DCDC_REG1 { - regulator-name= "vdd_core"; + regulator-name = "vdd_core"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -95,7 +95,7 @@ }; vdd_buck2: DCDC_REG2 { - regulator-name= "vdd_buck2"; + regulator-name = "vdd_buck2"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; regulator-always-on; @@ -106,7 +106,7 @@ }; vcc_ddr: DCDC_REG3 { - regulator-name= "vcc_ddr"; + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { @@ -115,7 +115,7 @@ }; vcc_io: DCDC_REG4 { - regulator-name= "vcc_io"; + regulator-name = "vcc_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -127,7 +127,7 @@ }; vdd_10: LDO_REG1 { - regulator-name= "vdd_10"; + regulator-name = "vdd_10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -138,7 +138,7 @@ }; vcc_18: LDO_REG2 { - regulator-name= "vcc_18"; + regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -149,7 +149,7 @@ }; vdd10_pmu: LDO_REG3 { - regulator-name= "vdd10_pmu"; + regulator-name = "vdd10_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 46cad7c..ef150f4 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -96,7 +96,7 @@ regulators { vdd_core: DCDC_REG1 { - regulator-name= "vdd_core"; + regulator-name = "vdd_core"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; regulator-always-on; @@ -108,7 +108,7 @@ }; vdd_cam: DCDC_REG2 { - regulator-name= "vdd_cam"; + regulator-name = "vdd_cam"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <2000000>; regulator-state-mem { @@ -117,7 +117,7 @@ }; vcc_ddr: DCDC_REG3 { - regulator-name= "vcc_ddr"; + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { @@ -126,7 +126,7 @@ }; vcc_io: DCDC_REG4 { - regulator-name= "vcc_io"; + regulator-name = "vcc_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -138,7 +138,7 @@ }; vdd_10: LDO_REG1 { - regulator-name= "vdd_10"; + regulator-name = "vdd_10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -149,7 +149,7 @@ }; vcc_18: LDO_REG2 { - regulator-name= "vcc_18"; + regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -160,7 +160,7 @@ }; vdd10_pmu: LDO_REG3 { - regulator-name= "vdd10_pmu"; + regulator-name = "vdd10_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index c158a7e..abf3006 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -748,7 +748,7 @@ gmac { rmii_pins: rmii-pins { - rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>, + rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>, <1 RK_PC3 2 &pcfg_pull_none>, <1 RK_PC4 2 &pcfg_pull_none>, <1 RK_PB2 3 &pcfg_pull_none_drv_12ma>, diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h new file mode 100644 index 0000000..76b6171 --- /dev/null +++ b/arch/arm/boot/dts/s3c2410-pinctrl.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung S3C2410 DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski + */ + +#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ + +#define S3C2410_PIN_FUNC_INPUT 0 +#define S3C2410_PIN_FUNC_OUTPUT 1 +#define S3C2410_PIN_FUNC_2 2 +#define S3C2410_PIN_FUNC_3 3 + +#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi index 20a7d72..3268366 100644 --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -5,7 +5,7 @@ * Copyright (c) 2013 Heiko Stuebner */ -#include +#include "s3c2410-pinctrl.h" &pinctrl_0 { /* @@ -82,91 +82,91 @@ uart0_data: uart0-data-pins { samsung,pins = "gph-0", "gph-1"; - samsung,pin-function = ; + samsung,pin-function = ; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gph-8", "gph-9"; - samsung,pin-function = ; + samsung,pin-function = ; }; uart1_data: uart1-data-pins { samsung,pins = "gph-2", "gph-3"; - samsung,pin-function = ; + samsung,pin-function = ; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gph-10", "gph-11"; - samsung,pin-function = ; + samsung,pin-function = ; }; uart2_data: uart2-data-pins { samsung,pins = "gph-4", "gph-5"; - samsung,pin-function = ; + samsung,pin-function = ; }; uart2_fctl: uart2-fctl-pins { samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = ; + samsung,pin-function = ; }; uart3_data: uart3-data-pins { samsung,pins = "gph-6", "gph-7"; - samsung,pin-function = ; + samsung,pin-function = ; }; extuart_clk: extuart-clk-pins { samsung,pins = "gph-12"; - samsung,pin-function = ; + samsung,pin-function = ; }; i2c0_bus: i2c0-bus-pins { samsung,pins = "gpe-14", "gpe-15"; - samsung,pin-function = ; + samsung,pin-function = ; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpe-11", "gpe-12", "gpe-13"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd0_clk: sd0-clk-pins { samsung,pins = "gpe-5"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd0_cmd: sd0-cmd-pins { samsung,pins = "gpe-6"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd0_bus1: sd0-bus1-pins { samsung,pins = "gpe-7"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd0_bus4: sd0-bus4-pins { samsung,pins = "gpe-8", "gpe-9", "gpe-10"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd1_cmd: sd1-cmd-pins { samsung,pins = "gpl-8"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd1_clk: sd1-clk-pins { samsung,pins = "gpl-9"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd1_bus1: sd1-bus1-pins { samsung,pins = "gpl-0"; - samsung,pin-function = ; + samsung,pin-function = ; }; sd1_bus4: sd1-bus4-pins { samsung,pins = "gpl-1", "gpl-2", "gpl-3"; - samsung,pin-function = ; + samsung,pin-function = ; }; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 4f084f4f..4660751 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -45,7 +45,7 @@ status = "disabled"; }; - sdhci_1: sdhci@4ac00000 { + sdhci_1: mmc@4ac00000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; @@ -56,7 +56,7 @@ status = "disabled"; }; - sdhci_0: sdhci@4a800000 { + sdhci_0: mmc@4a800000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi index 0a3186d..f53959b 100644 --- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi +++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi @@ -9,7 +9,7 @@ * listed as device tree nodes in this file. */ -#include +#include "s3c64xx-pinctrl.h" &pinctrl0 { /* @@ -133,219 +133,219 @@ uart0_data: uart0-data-pins { samsung,pins = "gpa-0", "gpa-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gpa-2", "gpa-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; uart1_data: uart1-data-pins { samsung,pins = "gpa-4", "gpa-5"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gpa-6", "gpa-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; uart2_data: uart2-data-pins { samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; uart3_data: uart3-data-pins { samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; ext_dma_0: ext-dma-0-pins { samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; ext_dma_1: ext-dma-1-pins { samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; irda_data_0: irda-data-0-pins { samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; irda_data_1: irda-data-1-pins { samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; irda_sdbw: irda-sdbw-pins { samsung,pins = "gpb-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; i2c0_bus: i2c0-bus-pins { samsung,pins = "gpb-5", "gpb-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; i2c1_bus: i2c1-bus-pins { /* S3C6410-only */ samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpc-0", "gpc-1", "gpc-2"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; spi0_cs: spi0-cs-pins { samsung,pins = "gpc-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpc-4", "gpc-5", "gpc-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; spi1_cs: spi1-cs-pins { samsung,pins = "gpc-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd0_cmd: sd0-cmd-pins { samsung,pins = "gpg-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd0_clk: sd0-clk-pins { samsung,pins = "gpg-0"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd0_bus1: sd0-bus1-pins { samsung,pins = "gpg-2"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd0_bus4: sd0-bus4-pins { samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd0_cd: sd0-cd-pins { samsung,pins = "gpg-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd1_cmd: sd1-cmd-pins { samsung,pins = "gph-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd1_clk: sd1-clk-pins { samsung,pins = "gph-0"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd1_bus1: sd1-bus1-pins { samsung,pins = "gph-2"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd1_bus4: sd1-bus4-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd1_bus8: sd1-bus8-pins { samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5", "gph-6", "gph-7", "gph-8", "gph-9"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd1_cd: sd1-cd-pins { samsung,pins = "gpg-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd2_cmd: sd2-cmd-pins { samsung,pins = "gpc-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd2_clk: sd2-clk-pins { samsung,pins = "gpc-5"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd2_bus1: sd2-bus1-pins { samsung,pins = "gph-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; sd2_bus4: sd2-bus4-pins { samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; i2s0_bus: i2s0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; i2s0_cdclk: i2s0-cdclk-pins { samsung,pins = "gpd-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; i2s1_bus: i2s1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; i2s1_cdclk: i2s1-cdclk-pins { samsung,pins = "gpe-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; @@ -353,50 +353,50 @@ /* S3C6410-only */ samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6", "gph-8", "gph-9"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; i2s2_cdclk: i2s2-cdclk-pins { /* S3C6410-only */ samsung,pins = "gph-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; pcm0_bus: pcm0-bus-pins { samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; pcm0_extclk: pcm0-extclk-pins { samsung,pins = "gpd-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; pcm1_bus: pcm1-bus-pins { samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; pcm1_extclk: pcm1-extclk-pins { samsung,pins = "gpe-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; ac97_bus_0: ac97-bus-0-pins { samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; ac97_bus_1: ac97-bus-1-pins { samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; @@ -404,242 +404,242 @@ samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4", "gpf-5", "gpf-6", "gpf-7", "gpf-8", "gpf-9", "gpf-10", "gpf-11", "gpf-12"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; cam_rst: cam-rst-pins { samsung,pins = "gpf-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; cam_field: cam-field-pins { /* S3C6410-only */ samsung,pins = "gpb-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; pwm_extclk: pwm-extclk-pins { samsung,pins = "gpf-13"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; pwm0_out: pwm0-out-pins { samsung,pins = "gpf-14"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpf-15"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; clkout0: clkout-0-pins { samsung,pins = "gpf-14"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col0_0: keypad-col0-0-pins { samsung,pins = "gph-0"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col1_0: keypad-col1-0-pins { samsung,pins = "gph-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col2_0: keypad-col2-0-pins { samsung,pins = "gph-2"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col3_0: keypad-col3-0-pins { samsung,pins = "gph-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col4_0: keypad-col4-0-pins { samsung,pins = "gph-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col5_0: keypad-col5-0-pins { samsung,pins = "gph-5"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col6_0: keypad-col6-0-pins { samsung,pins = "gph-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col7_0: keypad-col7-0-pins { samsung,pins = "gph-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col0_1: keypad-col0-1-pins { samsung,pins = "gpl-0"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col1_1: keypad-col1-1-pins { samsung,pins = "gpl-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col2_1: keypad-col2-1-pins { samsung,pins = "gpl-2"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col3_1: keypad-col3-1-pins { samsung,pins = "gpl-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col4_1: keypad-col4-1-pins { samsung,pins = "gpl-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col5_1: keypad-col5-1-pins { samsung,pins = "gpl-5"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col6_1: keypad-col6-1-pins { samsung,pins = "gpl-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_col7_1: keypad-col7-1-pins { samsung,pins = "gpl-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row0_0: keypad-row0-0-pins { samsung,pins = "gpk-8"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row1_0: keypad-row1-0-pins { samsung,pins = "gpk-9"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row2_0: keypad-row2-0-pins { samsung,pins = "gpk-10"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row3_0: keypad-row3-0-pins { samsung,pins = "gpk-11"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row4_0: keypad-row4-0-pins { samsung,pins = "gpk-12"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row5_0: keypad-row5-0-pins { samsung,pins = "gpk-13"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row6_0: keypad-row6-0-pins { samsung,pins = "gpk-14"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row7_0: keypad-row7-0-pins { samsung,pins = "gpk-15"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row0_1: keypad-row0-1-pins { samsung,pins = "gpn-0"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row1_1: keypad-row1-1-pins { samsung,pins = "gpn-1"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row2_1: keypad-row2-1-pins { samsung,pins = "gpn-2"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row3_1: keypad-row3-1-pins { samsung,pins = "gpn-3"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row4_1: keypad-row4-1-pins { samsung,pins = "gpn-4"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row5_1: keypad-row5-1-pins { samsung,pins = "gpn-5"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row6_1: keypad-row6-1-pins { samsung,pins = "gpn-6"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; keypad_row7_1: keypad-row7-1-pins { samsung,pins = "gpn-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; lcd_ctrl: lcd-ctrl-pins { samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; @@ -648,7 +648,7 @@ "gpi-7", "gpi-10", "gpi-11", "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-3", "gpj-4", "gpj-5", "gpj-6", "gpj-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; @@ -658,7 +658,7 @@ "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-2", "gpj-3", "gpj-4", "gpj-5", "gpj-6", "gpj-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; @@ -669,14 +669,14 @@ "gpi-12", "gpi-13", "gpi-14", "gpi-15", "gpj-0", "gpj-1", "gpj-2", "gpj-3", "gpj-4", "gpj-5", "gpj-6", "gpj-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; hsi_bus: hsi-bus-pins { samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3", "gpk-4", "gpk-5", "gpk-6", "gpk-7"; - samsung,pin-function = ; + samsung,pin-function = ; samsung,pin-pud = ; }; }; diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.h b/arch/arm/boot/dts/s3c64xx-pinctrl.h new file mode 100644 index 0000000..645c591 --- /dev/null +++ b/arch/arm/boot/dts/s3c64xx-pinctrl.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung S3C64xx DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski + */ + +#ifndef __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ + +#define S3C64XX_PIN_PULL_NONE 0 +#define S3C64XX_PIN_PULL_DOWN 1 +#define S3C64XX_PIN_PULL_UP 2 + +#define S3C64XX_PIN_FUNC_INPUT 0 +#define S3C64XX_PIN_FUNC_OUTPUT 1 +#define S3C64XX_PIN_FUNC_2 2 +#define S3C64XX_PIN_FUNC_3 3 +#define S3C64XX_PIN_FUNC_4 4 +#define S3C64XX_PIN_FUNC_5 5 +#define S3C64XX_PIN_FUNC_6 6 +#define S3C64XX_PIN_FUNC_EINT 7 + +#endif /* __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index 67a7a66..c03df63 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -59,7 +59,7 @@ #interrupt-cells = <1>; }; - sdhci0: sdhci@7c200000 { + sdhci0: mmc@7c200000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x7c200000 0x100>; interrupt-parent = <&vic1>; @@ -70,7 +70,7 @@ status = "disabled"; }; - sdhci1: sdhci@7c300000 { + sdhci1: mmc@7c300000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x7c300000 0x100>; interrupt-parent = <&vic1>; @@ -81,7 +81,7 @@ status = "disabled"; }; - sdhci2: sdhci@7c400000 { + sdhci2: mmc@7c400000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x7c400000 0x100>; interrupt-parent = <&vic1>; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index bc0b735..0f5c6cd 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -392,7 +392,7 @@ &pinctrl0 { t_flash_detect: t-flash-detect-pins { samsung,pins = "gph3-4"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; }; }; diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index daa1067..5541df4 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -646,183 +646,183 @@ &pinctrl0 { bt_reset: bt-reset-pins { samsung,pins = "gpb-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; wlan_bt_en: wlan-bt-en-pins { samsung,pins = "gpb-5"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; samsung,pin-val = <1>; }; codec_ldo: codec-ldo-pins { samsung,pins = "gpf3-4"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; }; prox_i2c_pins: gp2a-i2c-pins { samsung,pins = "gpg0-2", "gpg2-2"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; wlan_gpio_rst: wlan-gpio-rst-pins { samsung,pins = "gpg1-2"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; }; bt_wake: bt-wake-pins { samsung,pins = "gpg3-4"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; }; gp2a_irq: gp2a-irq-pins { samsung,pins = "gph0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pmic_dvs_pins: pmic-dvs-pins { samsung,pins = "gph0-3", "gph0-4", "gph0-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; samsung,pin-val = <0>; }; pmic_irq: pmic-irq-pins { samsung,pins = "gph0-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; wifi_host_wake: wifi-host-wake-pins { samsung,pins = "gph2-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; bt_host_wake: bt-host-wake-pins { samsung,pins = "gph2-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; musb_irq: musq-irq-pins { samsung,pins = "gph2-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; tf_detect: tf-detect-pins { samsung,pins = "gph3-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; wifi_wake: wifi-wake-pins { samsung,pins = "gph3-5"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; }; magnetometer_i2c_pins: yas529-i2c-pins-pins { samsung,pins = "gpj0-0", "gpj0-1"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; ts_irq: ts-irq-pins { samsung,pins = "gpj0-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; vibrator_ena: vibrator-ena-pins { samsung,pins = "gpj1-1"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; gp2a_power: gp2a-power-pins { samsung,pins = "gpj1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; touchkey_i2c_pins: touchkey-i2c-pins { samsung,pins = "gpj3-0", "gpj3-1"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; touchkey_vdd_ena: touchkey-vdd-ena-pins { samsung,pins = "gpj3-2"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; musb_i2c_pins: musb-i2c-pins { samsung,pins = "gpj3-4", "gpj3-5"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; accel_i2c_pins: accel-i2c-pins { samsung,pins = "gpj3-6", "gpj3-7"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pmic_i2c_pins: pmic-i2c-pins-pins { samsung,pins = "gpj4-0", "gpj4-3"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; touchkey_irq: touchkey-irq-pins { samsung,pins = "gpj4-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; lcd_spi_pins: spi-lcd-pins { samsung,pins = "mp01-1", "mp04-1", "mp04-3"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; fg_i2c_pins: fg-i2c-pins { samsung,pins = "mp05-0", "mp05-1"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sound_i2c_pins: sound-i2c-pins { samsung,pins = "mp05-2", "mp05-3"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; panel_rst: panel-rst-pins { samsung,pins = "mp05-5"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; }; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index dfb2ee6..eaa7c4f 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -17,20 +17,20 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; gpios = <&gph2 6 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - vol-down { + key-vol-down { label = "volume_down"; gpios = <&gph3 2 GPIO_ACTIVE_LOW>; linux,code = ; }; - vol-up { + key-vol-up { label = "volume_up"; gpios = <&gph3 1 GPIO_ACTIVE_LOW>; linux,code = ; @@ -128,33 +128,33 @@ headset_det: headset-det-pins { samsung,pins = "gph0-6", "gph3-6"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; }; fg_irq: fg-irq-pins { samsung,pins = "gph3-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; headset_micbias_ena: headset-micbias-ena-pins { samsung,pins = "gpj2-5"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; earpath_sel: earpath-sel-pins { samsung,pins = "gpj2-6"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; main_micbias_ena: main-micbias-ena-pins { samsung,pins = "gpj4-2"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; /* Based on vendor kernel v2.6.35.7 */ diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index a78caaa..cdd3653 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -24,26 +24,26 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; gpios = <&gph2 6 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - vol-down { + key-vol-down { label = "volume_down"; gpios = <&gph3 1 GPIO_ACTIVE_LOW>; linux,code = ; }; - vol-up { + key-vol-up { label = "volume_up"; gpios = <&gph3 2 GPIO_ACTIVE_LOW>; linux,code = ; }; - home { + key-home { label = "home"; gpios = <&gph3 5 GPIO_ACTIVE_LOW>; linux,code = ; @@ -152,47 +152,47 @@ fm_i2c_pins: fm-i2c-pins-pins { samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; headset_det: headset-det-pins { samsung,pins = "gph0-6", "gph3-6"; - samsung,pin-function = ; - samsung,pin-pud = ; + samsung,pin-function = ; + samsung,pin-pud = ; }; fm_irq: fm-irq-pins { samsung,pins = "gpj2-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; fm_rst: fm-rst-pins { samsung,pins = "gpj2-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; earpath_sel: earpath-sel-pins { samsung,pins = "gpj2-6"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; massmemory_en: massmemory-en-pins { samsung,pins = "gpj2-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; micbias_reg_ena: micbias-reg-ena-pins { samsung,pins = "gpj4-2"; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; /* Based on CyanogenMod 3.0.101 kernel */ diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index ae34e7e..6d6daef 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -16,13 +16,13 @@ * nodes can be added to this file. */ -#include +#include "s5pv210-pinctrl.h" #define PIN_SLP(_pin, _mode, _pull) \ _pin { \ samsung,pins = #_pin; \ - samsung,pin-con-pdn = ; \ - samsung,pin-pud-pdn = ; \ + samsung,pin-con-pdn = ; \ + samsung,pin-pud-pdn = ; \ } &pinctrl0 { @@ -280,559 +280,559 @@ uart0_data: uart0-data-pins { samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; uart0_fctl: uart0-fctl-pins { samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; uart1_data: uart1-data-pins { samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; uart1_fctl: uart1-fctl-pins { samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; uart2_data: uart2-data-pins { samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; uart2_fctl: uart2-fctl-pins { samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; uart3_data: uart3-data-pins { samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; uart_audio: uart-audio-pins { samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; spi0_bus: spi0-bus-pins { samsung,pins = "gpb-0", "gpb-2", "gpb-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; spi1_bus: spi1-bus-pins { samsung,pins = "gpb-4", "gpb-6", "gpb-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; i2s0_bus: i2s0-bus-pins { samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", "gpi-4", "gpi-5", "gpi-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; i2s1_bus: i2s1-bus-pins { samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", "gpc0-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; i2s2_bus: i2s2-bus-pins { samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pcm1_bus: pcm1-bus-pins { samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", "gpc0-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; ac97_bus: ac97-bus-pins { samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", "gpc0-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; i2s2_bus: i2s2-bus-pins { samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pcm2_bus: pcm2-bus-pins { samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; spdif_bus: spdif-bus-pins { samsung,pins = "gpc1-0", "gpc1-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; spi2_bus: spi2-bus-pins { samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; i2c0_bus: i2c0-bus-pins { samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; i2c1_bus: i2c1-bus-pins { samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; i2c2_bus: i2c2-bus-pins { samsung,pins = "gpd1-4", "gpd1-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pwm0_out: pwm0-out-pins { samsung,pins = "gpd0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pwm1_out: pwm1-out-pins { samsung,pins = "gpd0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pwm2_out: pwm2-out-pins { samsung,pins = "gpd0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; pwm3_out: pwm3-out-pins { samsung,pins = "gpd0-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row0: keypad-row-0-pins { samsung,pins = "gph3-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row1: keypad-row-1-pins { samsung,pins = "gph3-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row2: keypad-row-2-pins { samsung,pins = "gph3-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row3: keypad-row-3-pins { samsung,pins = "gph3-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row4: keypad-row-4-pins { samsung,pins = "gph3-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row5: keypad-row-5-pins { samsung,pins = "gph3-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row6: keypad-row-6-pins { samsung,pins = "gph3-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_row7: keypad-row-7-pins { samsung,pins = "gph3-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col0: keypad-col-0-pins { samsung,pins = "gph2-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col1: keypad-col-1-pins { samsung,pins = "gph2-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col2: keypad-col-2-pins { samsung,pins = "gph2-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col3: keypad-col-3-pins { samsung,pins = "gph2-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col4: keypad-col-4-pins { samsung,pins = "gph2-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col5: keypad-col-5-pins { samsung,pins = "gph2-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col6: keypad-col-6-pins { samsung,pins = "gph2-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; keypad_col7: keypad-col-7-pins { samsung,pins = "gph2-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd0_clk: sd0-clk-pins { samsung,pins = "gpg0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd0_cmd: sd0-cmd-pins { samsung,pins = "gpg0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd0_cd: sd0-cd-pins { samsung,pins = "gpg0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd0_bus1: sd0-bus-width1-pins { samsung,pins = "gpg0-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd0_bus4: sd0-bus-width4-pins { samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd0_bus8: sd0-bus-width8-pins { samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd1_clk: sd1-clk-pins { samsung,pins = "gpg1-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd1_cmd: sd1-cmd-pins { samsung,pins = "gpg1-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd1_cd: sd1-cd-pins { samsung,pins = "gpg1-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd1_bus1: sd1-bus-width1-pins { samsung,pins = "gpg1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd1_bus4: sd1-bus-width4-pins { samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd2_clk: sd2-clk-pins { samsung,pins = "gpg2-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd2_cmd: sd2-cmd-pins { samsung,pins = "gpg2-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd2_cd: sd2-cd-pins { samsung,pins = "gpg2-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd2_bus1: sd2-bus-width1-pins { samsung,pins = "gpg2-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd2_bus4: sd2-bus-width4-pins { samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd2_bus8: sd2-bus-width8-pins { samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd3_clk: sd3-clk-pins { samsung,pins = "gpg3-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd3_cmd: sd3-cmd-pins { samsung,pins = "gpg3-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd3_cd: sd3-cd-pins { samsung,pins = "gpg3-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd3_bus1: sd3-bus-width1-pins { samsung,pins = "gpg3-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; sd3_bus4: sd3-bus-width4-pins { samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; eint0: ext-int0-pins { samsung,pins = "gph0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; eint8: ext-int8-pins { samsung,pins = "gph1-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; eint15: ext-int15-pins { samsung,pins = "gph1-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; eint16: ext-int16-pins { samsung,pins = "gph2-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; eint31: ext-int31-pins { samsung,pins = "gph3-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; cam_port_a_io: cam-port-a-io-pins { samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", "gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; cam_port_a_clk_active: cam-port-a-clk-active-pins { samsung,pins = "gpe1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; cam_port_a_clk_idle: cam-port-a-clk-idle-pins { samsung,pins = "gpe1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; cam_port_b_io: cam-port-b-io-pins { samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; cam_port_b_clk_active: cam-port-b-clk-active-pins { samsung,pins = "gpj1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; cam_port_b_clk_idle: cam-port-b-clk-idle-pins { samsung,pins = "gpj1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; lcd_ctrl: lcd-ctrl-pins { samsung,pins = "gpd0-0", "gpd0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; lcd_sync: lcd-sync-pins { samsung,pins = "gpf0-0", "gpf0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; lcd_clk: lcd-clk-pins { samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; lcd_data24: lcd-data-width24-pins { @@ -842,8 +842,8 @@ "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; }; }; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.h b/arch/arm/boot/dts/s5pv210-pinctrl.h new file mode 100644 index 0000000..29bdf37 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-pinctrl.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Samsung S5PV210 DTS pinctrl constants + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2022 Linaro Ltd + * Author: Krzysztof Kozlowski + */ + +#ifndef __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ +#define __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ + +#define S5PV210_PIN_PULL_NONE 0 +#define S5PV210_PIN_PULL_DOWN 1 +#define S5PV210_PIN_PULL_UP 2 + +/* Pin function in power down mode */ +#define S5PV210_PIN_PDN_OUT0 0 +#define S5PV210_PIN_PDN_OUT1 1 +#define S5PV210_PIN_PDN_INPUT 2 +#define S5PV210_PIN_PDN_PREV 3 + +#define S5PV210_PIN_DRV_LV1 0 +#define S5PV210_PIN_DRV_LV2 2 +#define S5PV210_PIN_DRV_LV3 1 +#define S5PV210_PIN_DRV_LV4 3 + +#define S5PV210_PIN_FUNC_INPUT 0 +#define S5PV210_PIN_FUNC_OUTPUT 1 +#define S5PV210_PIN_FUNC_2 2 +#define S5PV210_PIN_FUNC_3 3 +#define S5PV210_PIN_FUNC_4 4 +#define S5PV210_PIN_FUNC_5 5 +#define S5PV210_PIN_FUNC_6 6 +#define S5PV210_PIN_FUNC_EINT 0xf +#define S5PV210_PIN_FUNC_F S5PV210_PIN_FUNC_EINT + +#endif /* __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ */ diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index f1b85aa..12e90a1 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -357,7 +357,7 @@ status = "disabled"; }; - sdhci0: sdhci@eb000000 { + sdhci0: mmc@eb000000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb000000 0x100000>; interrupt-parent = <&vic1>; @@ -368,7 +368,7 @@ status = "disabled"; }; - sdhci1: sdhci@eb100000 { + sdhci1: mmc@eb100000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb100000 0x100000>; interrupt-parent = <&vic1>; @@ -379,7 +379,7 @@ status = "disabled"; }; - sdhci2: sdhci@eb200000 { + sdhci2: mmc@eb200000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb200000 0x100000>; interrupt-parent = <&vic1>; @@ -390,7 +390,7 @@ status = "disabled"; }; - sdhci3: sdhci@eb300000 { + sdhci3: mmc@eb300000 { compatible = "samsung,s3c6410-sdhci"; reg = <0xeb300000 0x100000>; interrupt-parent = <&vic3>; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index c328b67..d3f60f6 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -464,7 +464,7 @@ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; #pwm-cells = <3>; - status="disabled"; + status = "disabled"; }; hlcdc: hlcdc@f8038000 { @@ -667,7 +667,7 @@ clock-names = "td_slck", "md_slck", "main_xtal"; }; - reset_controller: rstc@fffffe00 { + reset_controller: reset-controller@fffffe00 { compatible = "microchip,sam9x60-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k 0>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 89c71d4..2c50a02 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -99,6 +99,16 @@ ranges = <0 0x00200000 0x20000>; }; + resistive_touch: resistive-touch { + compatible = "resistive-adc-touch"; + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; + io-channel-names = "x", "y", "pressure"; + touchscreen-min-pressure = <50000>; + status = "disabled"; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -374,8 +384,6 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */ 66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */ 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */ - #address-cells = <1>; - #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -660,7 +668,7 @@ ranges = <0 0xf8044000 0x1420>; }; - reset_controller: rstc@f8048000 { + reset_controller: reset-controller@f8048000 { compatible = "atmel,sama5d3-rstc"; reg = <0xf8048000 0x10>; clocks = <&clk32k>; @@ -1050,16 +1058,6 @@ status = "disabled"; }; - resistive_touch: resistive-touch { - compatible = "resistive-adc-touch"; - io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, - <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, - <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; - io-channel-names = "x", "y", "pressure"; - touchscreen-min-pressure = <50000>; - status = "disabled"; - }; - pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; @@ -1124,7 +1122,7 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>; clock-names = "pclk", "gclk"; assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>; - assigned-parrents = <&pmc PMC_TYPE_GCK 55>; + assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 8fa423c..2d0935a 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1003,7 +1003,7 @@ clock-names = "slow_clk", "main_xtal"; }; - reset_controller: rstc@fffffe00 { + reset_controller: reset-controller@fffffe00 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 7b92426..1e5c018 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -726,7 +726,7 @@ }; }; - reset_controller: rstc@fc068600 { + reset_controller: reset-controller@fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index a37e3a8..bb6d71e 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -198,6 +198,13 @@ clock-names = "td_slck", "md_slck", "main_xtal"; }; + reset_controller: reset-controller@e001d000 { + compatible = "microchip,sama7g5-rstc"; + reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + shdwc: shdwc@e001d010 { compatible = "microchip,sama7g5-shdwc", "syscon"; reg = <0xe001d010 0x10>; diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts index a61a078..6938181 100644 --- a/arch/arm/boot/dts/sd5203.dts +++ b/arch/arm/boot/dts/sd5203.dts @@ -15,7 +15,7 @@ #size-cells = <1>; chosen { - bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000"; + bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000"; }; aliases { diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 26bda25..4370e3c 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -736,6 +736,16 @@ <37 IRQ_TYPE_LEVEL_HIGH>; }; + sdmmca-ecc@ff8c2c00 { + compatible = "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c2c00 0x400>; + altr,ecc-parent = <&mmc>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>; + }; + dma-ecc@ff8c8000 { compatible = "altr,socfpga-dma-ecc"; reg = <0xff8c8000 0x400>; diff --git a/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts new file mode 100644 index 0000000..422d00c --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2022 Google LLC + */ +/dts-v1/; +#include "socfpga_arria10_mercury_aa1.dtsi" + +/ { + model = "Google Chameleon V3"; + compatible = "google,chameleon-v3", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; + + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + }; +}; + +&gmac0 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + ssm2603: audio-codec@1a { + compatible = "adi,ssm2603"; + reg = <0x1a>; + }; +}; + +&i2c1 { + status = "okay"; + + u80: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SOM_AUD_MUTE", + "DP1_OUT_CEC_EN", + "DP2_OUT_CEC_EN", + "DP1_SOM_PS8469_CAD", + "DPD_SOM_PS8469_CAD", + "DP_OUT_PWR_EN", + "STM32_RST_L", + "STM32_BOOT0", + + "FPGA_PROT", + "STM32_FPGA_COMM0", + "TP119", + "TP120", + "TP121", + "TP122", + "TP123", + "TP124"; + }; +}; + +&mmc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi similarity index 70% rename from arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts rename to arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi index a75c059..ad7cd14 100644 --- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts +++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 -/dts-v1/; +/* + * Copyright 2022 Google LLC + */ #include "socfpga_arria10.dtsi" @@ -11,8 +13,6 @@ aliases { ethernet0 = &gmac0; serial1 = &uart1; - i2c0 = &i2c0; - i2c1 = &i2c1; }; memory@0 { @@ -26,24 +26,11 @@ }; }; -&eccmgr { - sdmmca-ecc@ff8c2c00 { - compatible = "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c2c00 0x400>; - altr,ecc-parent = <&mmc>; - interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <16 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - &gmac0 { phy-mode = "rgmii"; phy-addr = <0xffffffff>; /* probe for phy addr */ max-frame-size = <3800>; - status = "okay"; phy-handle = <&phy3>; @@ -69,22 +56,13 @@ }; }; -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - &i2c1 { - status = "okay"; + atsha204a: crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; + isl12022: isl12022@6f { - status = "okay"; compatible = "isil,isl12022"; reg = <0x6f>; }; @@ -92,7 +70,6 @@ /* Following mappings are taken from arria10 socdk dts */ &mmc { - status = "okay"; cap-sd-highspeed; broken-cd; bus-width = <4>; @@ -101,12 +78,3 @@ &osc1 { clock-frequency = <33330000>; }; - -&uart1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index ddd1cf4..05408df 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -170,7 +170,7 @@ smi: flash@ea000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@e6000000 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 3a51a41..7700f2a 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -168,7 +168,7 @@ smi: flash@ea000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@e6000000 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 13e1bdb..818886e 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -88,7 +88,7 @@ }; pwm: pwm@e0180000 { - compatible ="st,spear13xx-pwm"; + compatible = "st,spear13xx-pwm"; reg = <0xe0180000 0x1000>; #pwm-cells = <2>; status = "disabled"; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index 2beb30c..303ef29 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -80,7 +80,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index 1c41e4a..ea0b530 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -94,7 +94,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index c322407..3c026d0 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -95,7 +95,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index b587e4e..34503ac 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -167,7 +167,7 @@ smi: flash@fc000000 { status = "okay"; - clock-rate=<50000000>; + clock-rate = <50000000>; flash@f8000000 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 47ac447..b124744 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -78,7 +78,7 @@ }; pwm: pwm@a8000000 { - compatible ="st,spear-pwm"; + compatible = "st,spear-pwm"; reg = <0xa8000000 0x1000>; #pwm-cells = <2>; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 35137c6..dd30d08 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -195,7 +195,7 @@ "CH_WD_EXP", "VBUS_CH_DROP_END"; monitored-battery = <&battery>; - vddadc-supply = <&ab8500_ldo_tvout_reg>; + vddadc-supply = <&ab8500_ldo_tvout_reg>; io-channels = <&gpadc 0x03>, <&gpadc 0x0a>, <&gpadc 0x09>, @@ -207,8 +207,8 @@ }; ab8500_chargalg { - compatible = "stericsson,ab8500-chargalg"; - monitored-battery = <&battery>; + compatible = "stericsson,ab8500-chargalg"; + monitored-battery = <&battery>; }; ab8500_usb: phy { diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index c28b326..9afe830 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -661,7 +661,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; @@ -679,7 +678,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; @@ -698,7 +696,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; @@ -717,7 +714,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; @@ -736,7 +732,6 @@ #address-cells = <1>; #size-cells = <0>; - v-i2c-supply = <&db8500_vape_reg>; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 8f504ed..e66fa59 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -353,11 +353,11 @@ * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) */ hrefv60_cfg1 { - pins ="GPIO65_F1"; + pins = "GPIO65_F1"; ste,config = <&gpio_out_hi>; }; hrefv60_cfg2 { - pins ="GPIO66_G3"; + pins = "GPIO66_G3"; ste,config = <&gpio_out_lo>; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index b6746ac..5f41256 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -598,8 +598,8 @@ reg = <0x19>; vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V - mount-matrix = "0", "-1", "0", - "1", "0", "0", + mount-matrix = "0", "1", "0", + "-1", "0", "0", "0", "0", "1"; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index 53062d5..806da3f 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -527,8 +527,8 @@ accelerometer@18 { compatible = "bosch,bma222e"; reg = <0x18>; - mount-matrix = "0", "1", "0", - "-1", "0", "0", + mount-matrix = "0", "-1", "0", + "1", "0", "0", "0", "0", "1"; vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index e6d4fd0..ed5c79c 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -633,8 +633,8 @@ accelerometer@8 { compatible = "bosch,bma222"; reg = <0x08>; - mount-matrix = "0", "1", "0", - "-1", "0", "0", + mount-matrix = "0", "-1", "0", + "1", "0", "0", "0", "0", "1"; vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 1713f78..5ebb779 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -137,8 +137,8 @@ }; irq-syscfg { - compatible = "st,stih407-irq-syscfg"; - st,syscfg = <&syscfg_core>; + compatible = "st,stih407-irq-syscfg"; + st,syscfg = <&syscfg_core>; st,irq-device = , ; st,fiq-device = , @@ -157,8 +157,8 @@ miphy28lp_phy: miphy28lp { compatible = "st,miphy28lp-phy"; st,syscfg = <&syscfg_core>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; ranges; phy_port0: port@9b22000 { @@ -208,26 +208,26 @@ }; st231_gp0: st231-gp0 { - compatible = "st,st231-rproc"; - memory-region = <&gp0_reserved>; - resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x22c>; + compatible = "st,st231-rproc"; + memory-region = <&gp0_reserved>; + resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x22c>; #mbox-cells = <1>; mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>; }; st231_delta: st231-delta { - compatible = "st,st231-rproc"; - memory-region = <&delta_reserved>; - resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; - reset-names = "sw_reset"; - clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; - clock-frequency = <600000000>; - st,syscfg = <&syscfg_core 0x224>; + compatible = "st,st231-rproc"; + memory-region = <&delta_reserved>; + resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x224>; #mbox-cells = <1>; mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx"; mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>; @@ -710,78 +710,78 @@ st_dwc3: dwc3@8f94000 { - compatible = "st,stih407-dwc3"; - reg = <0x08f94000 0x1000>, <0x110 0x4>; - reg-names = "reg-glue", "syscfg-reg"; - st,syscfg = <&syscfg_core>; - resets = <&powerdown STIH407_USB3_POWERDOWN>, - <&softreset STIH407_MIPHY2_SOFTRESET>; - reset-names = "powerdown", "softreset"; - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb3>; + compatible = "st,stih407-dwc3"; + reg = <0x08f94000 0x1000>, <0x110 0x4>; + reg-names = "reg-glue", "syscfg-reg"; + st,syscfg = <&syscfg_core>; + resets = <&powerdown STIH407_USB3_POWERDOWN>, + <&softreset STIH407_MIPHY2_SOFTRESET>; + reset-names = "powerdown", "softreset"; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; ranges; status = "disabled"; - dwc3: dwc3@9900000 { - compatible = "snps,dwc3"; - reg = <0x09900000 0x100000>; - interrupts = ; - dr_mode = "host"; - phy-names = "usb2-phy", "usb3-phy"; - phys = <&usb2_picophy0>, - <&phy_port2 PHY_TYPE_USB3>; + dwc3: usb@9900000 { + compatible = "snps,dwc3"; + reg = <0x09900000 0x100000>; + interrupts = ; + dr_mode = "host"; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy0>, + <&phy_port2 PHY_TYPE_USB3>; snps,dis_u3_susphy_quirk; }; }; /* COMMS PWM Module */ pwm0: pwm@9810000 { - compatible = "st,sti-pwm"; - #pwm-cells = <2>; - reg = <0x9810000 0x68>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_chan0_default>; - clock-names = "pwm"; - clocks = <&clk_sysin>; + compatible = "st,sti-pwm"; + #pwm-cells = <2>; + reg = <0x9810000 0x68>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; st,pwm-num-chan = <1>; - status = "disabled"; + status = "disabled"; }; /* SBC PWM Module */ pwm1: pwm@9510000 { - compatible = "st,sti-pwm"; - #pwm-cells = <2>; - reg = <0x9510000 0x68>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1_chan0_default - &pinctrl_pwm1_chan1_default - &pinctrl_pwm1_chan2_default - &pinctrl_pwm1_chan3_default>; - clock-names = "pwm"; - clocks = <&clk_sysin>; + compatible = "st,sti-pwm"; + #pwm-cells = <2>; + reg = <0x9510000 0x68>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + &pinctrl_pwm1_chan1_default + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; st,pwm-num-chan = <4>; - status = "disabled"; + status = "disabled"; }; rng10: rng@8a89000 { - compatible = "st,rng"; - reg = <0x08a89000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; + compatible = "st,rng"; + reg = <0x08a89000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; }; rng11: rng@8a8a000 { - compatible = "st,rng"; - reg = <0x08a8a000 0x1000>; - clocks = <&clk_sysin>; - status = "okay"; + compatible = "st,rng"; + reg = <0x08a8a000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; }; ethernet0: dwmac@9630000 { @@ -812,36 +812,36 @@ }; mailbox0: mailbox@8f00000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f00000 0x1000>; - interrupts = ; - #mbox-cells = <2>; - mbox-name = "a9"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f00000 0x1000>; + interrupts = ; + #mbox-cells = <2>; + mbox-name = "a9"; + status = "okay"; }; mailbox1: mailbox@8f01000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f01000 0x1000>; - #mbox-cells = <2>; - mbox-name = "st231_gp_1"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f01000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_gp_1"; + status = "okay"; }; mailbox2: mailbox@8f02000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f02000 0x1000>; - #mbox-cells = <2>; - mbox-name = "st231_gp_0"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f02000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_gp_0"; + status = "okay"; }; mailbox3: mailbox@8f03000 { - compatible = "st,stih407-mailbox"; - reg = <0x8f03000 0x1000>; - #mbox-cells = <2>; - mbox-name = "st231_audio_video"; - status = "okay"; + compatible = "st,stih407-mailbox"; + reg = <0x8f03000 0x1000>; + #mbox-cells = <2>; + mbox-name = "st231_audio_video"; + status = "okay"; }; /* fdma audio */ @@ -913,7 +913,7 @@ dmas = <&fdma0 2 0 1>; dma-names = "tx"; - status = "disabled"; + status = "disabled"; }; sti_uni_player1: sti-uni-player@8d81000 { diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 9e212b0..aca43d2 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -13,7 +13,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <0 0>; - assigned-clocks = <&clk_s_d2_quadfs 0>, + assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, <&clk_s_c0_flexgen CLK_COMPO_DVP>, @@ -106,7 +106,7 @@ reg-names = "hdmi-reg"; #sound-dai-cells = <0>; interrupts = ; - interrupt-names = "irq"; + interrupt-names = "irq"; clock-names = "pix", "tmds", "phy", diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index ce2f62c..a39dd5f 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -105,7 +105,7 @@ #size-cells = <1>; reg = <0 0>; - assigned-clocks = <&clk_s_d2_quadfs 0>, + assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, <&clk_s_c0_flexgen CLK_COMPO_DVP>, @@ -198,7 +198,7 @@ reg-names = "hdmi-reg"; #sound-dai-cells = <0>; interrupts = ; - interrupt-names = "irq"; + interrupt-names = "irq"; clock-names = "pix", "tmds", "phy", diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 4c72ded..2aa9460 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -175,11 +175,11 @@ /* tsin0 is TSA on NIMA */ tsin0: port { - tsin-num = <0>; + tsin-num = <0>; serial-not-parallel; - i2c-bus = <&ssc2>; - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; - dvb-card = ; + i2c-bus = <&ssc2>; + reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; + dvb-card = ; }; }; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 0d98aca..3de0e9d 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -251,10 +251,10 @@ &mac { status = "okay"; - pinctrl-0 = <ðernet_mii>; - pinctrl-names = "default"; - phy-mode = "mii"; - phy-handle = <&phy1>; + pinctrl-0 = <ðernet_mii>; + pinctrl-names = "default"; + phy-mode = "mii"; + phy-handle = <&phy1>; mdio0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 91dde07..2059593 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -375,7 +375,7 @@ arm,primecell-periphid = <0x10153180>; reg = <0x52007000 0x1000>; interrupts = <49>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_CK>; clock-names = "apb_pclk"; resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>; @@ -389,7 +389,7 @@ arm,primecell-periphid = <0x10153180>; reg = <0x48022400 0x400>; interrupts = <124>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC2_CK>; clock-names = "apb_pclk"; resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index 59e01ce..2b45288 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -77,10 +77,10 @@ &mac { status = "disabled"; - pinctrl-0 = <ðernet_rmii>; - pinctrl-names = "default"; - phy-mode = "rmii"; - phy-handle = <&phy0>; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; mdio0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 38cc7fa..5c5d805 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -115,10 +115,10 @@ &mac { status = "disabled"; - pinctrl-0 = <ðernet_rmii>; - pinctrl-names = "default"; - phy-mode = "rmii"; - phy-handle = <&phy0>; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; mdio0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts index 9bb73bb..f3e70d3 100644 --- a/arch/arm/boot/dts/stm32h750i-art-pi.dts +++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts @@ -126,10 +126,10 @@ &mac { status = "disabled"; - pinctrl-0 = <ðernet_rmii>; - pinctrl-names = "default"; - phy-mode = "rmii"; - phy-handle = <&phy0>; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; mdio0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index f9ebc47..3a921db 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -4,6 +4,8 @@ * Author: Alexandre Torgue for STMicroelectronics. */ #include +#include +#include / { #address-cells = <1>; @@ -27,59 +29,28 @@ interrupt-parent = <&intc>; }; - clocks { - clk_axi: clk-axi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <266500000>; + firmware { + optee { + method = "smc"; + compatible = "linaro,optee-tz"; }; - clk_hse: clk-hse { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - }; - - clk_hsi: clk-hsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <64000000>; - }; - - clk_lsi: clk-lsi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32000>; - }; - - clk_pclk3: clk-pclk3 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <104438965>; - }; - - clk_pclk4: clk-pclk4 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <133250000>; - }; - - clk_pll4_p: clk-pll4_p { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; + scmi: scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + shmem = <&scmi_shm>; - clk_pll4_r: clk-pll4_r { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <99000000>; - }; + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; - clk_rtc_k: clk-rtc-k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; }; }; @@ -113,11 +84,25 @@ interrupt-parent = <&intc>; ranges; + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + }; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; interrupts = ; - clocks = <&clk_hsi>; + clocks = <&rcc UART4_K>; + resets = <&rcc UART4_R>; status = "disabled"; }; @@ -132,7 +117,8 @@ , , ; - clocks = <&clk_pclk4>; + clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -149,7 +135,8 @@ , , ; - clocks = <&clk_pclk4>; + clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -158,13 +145,27 @@ dmamux1: dma-router@48002000 { compatible = "st,stm32h7-dmamux"; reg = <0x48002000 0x40>; - clocks = <&clk_pclk4>; + clocks = <&rcc DMAMUX1>; + resets = <&rcc DMAMUX1_R>; #dma-cells = <3>; dma-masters = <&dma1 &dma2>; dma-requests = <128>; dma-channels = <16>; }; + rcc: rcc@50000000 { + compatible = "st,stm32mp13-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp13-exti", "syscon"; interrupt-controller; @@ -175,14 +176,14 @@ syscfg: syscon@50020000 { compatible = "st,stm32mp157-syscfg", "syscon"; reg = <0x50020000 0x400>; - clocks = <&clk_pclk3>; + clocks = <&rcc SYSCFG>; }; mdma: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = ; - clocks = <&clk_pclk4>; + clocks = <&rcc MDMA>; #dma-cells = <5>; dma-channels = <32>; dma-requests = <48>; @@ -194,8 +195,9 @@ reg = <0x58005000 0x1000>, <0x58006000 0x1000>; interrupts = ; interrupt-names = "cmd_irq"; - clocks = <&clk_pll4_p>; + clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; + resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <130000000>; @@ -208,8 +210,9 @@ reg = <0x58007000 0x1000>, <0x58008000 0x1000>; interrupts = ; interrupt-names = "cmd_irq"; - clocks = <&clk_pll4_p>; + clocks = <&rcc SDMMC2_K>; clock-names = "apb_pclk"; + resets = <&rcc SDMMC2_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <130000000>; @@ -219,7 +222,7 @@ iwdg2: watchdog@5a002000 { compatible = "st,stm32mp1-iwdg"; reg = <0x5a002000 0x400>; - clocks = <&clk_pclk4>, <&clk_lsi>; + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; clock-names = "pclk", "lsi"; status = "disabled"; }; @@ -228,7 +231,8 @@ compatible = "st,stm32mp1-rtc"; reg = <0x5c004000 0x400>; interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_pclk4>, <&clk_rtc_k>; + clocks = <&scmi_clk CK_SCMI_RTCAPB>, + <&scmi_clk CK_SCMI_RTC>; clock-names = "pclk", "rtc_ck"; status = "disabled"; }; @@ -269,7 +273,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOA>; st,bank-name = "GPIOA"; ngpios = <16>; gpio-ranges = <&pinctrl 0 0 16>; @@ -281,7 +285,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOB>; st,bank-name = "GPIOB"; ngpios = <16>; gpio-ranges = <&pinctrl 0 16 16>; @@ -293,7 +297,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOC>; st,bank-name = "GPIOC"; ngpios = <16>; gpio-ranges = <&pinctrl 0 32 16>; @@ -305,7 +309,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x3000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOD>; st,bank-name = "GPIOD"; ngpios = <16>; gpio-ranges = <&pinctrl 0 48 16>; @@ -317,7 +321,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x4000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOE>; st,bank-name = "GPIOE"; ngpios = <16>; gpio-ranges = <&pinctrl 0 64 16>; @@ -329,7 +333,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x5000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOF>; st,bank-name = "GPIOF"; ngpios = <16>; gpio-ranges = <&pinctrl 0 80 16>; @@ -341,7 +345,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x6000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOG>; st,bank-name = "GPIOG"; ngpios = <16>; gpio-ranges = <&pinctrl 0 96 16>; @@ -353,7 +357,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x7000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOH>; st,bank-name = "GPIOH"; ngpios = <15>; gpio-ranges = <&pinctrl 0 112 15>; @@ -365,7 +369,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x8000 0x400>; - clocks = <&clk_pclk4>; + clocks = <&rcc GPIOI>; st,bank-name = "GPIOI"; ngpios = <8>; gpio-ranges = <&pinctrl 0 128 8>; diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi index 0fb1386..531c263 100644 --- a/arch/arm/boot/dts/stm32mp133.dtsi +++ b/arch/arm/boot/dts/stm32mp133.dtsi @@ -15,7 +15,7 @@ interrupts = , ; interrupt-names = "int0", "int1"; - clocks = <&clk_hse>, <&clk_pll4_r>; + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; status = "disabled"; @@ -28,7 +28,7 @@ interrupts = , ; interrupt-names = "int0", "int1"; - clocks = <&clk_hse>, <&clk_pll4_r>; + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index 09d6226..e6b8ffd3 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -26,6 +26,17 @@ reg = <0xc0000000 0x20000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@dd000000 { + reg = <0xdd000000 0x3000000>; + no-map; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi index fa6889e..4d00e75 100644 --- a/arch/arm/boot/dts/stm32mp13xc.dtsi +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi @@ -10,7 +10,8 @@ compatible = "st,stm32mp1-cryp"; reg = <0x54002000 0x400>; interrupts = ; - clocks = <&clk_axi>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi index fa6889e..4d00e75 100644 --- a/arch/arm/boot/dts/stm32mp13xf.dtsi +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi @@ -10,7 +10,8 @@ compatible = "st,stm32mp1-cryp"; reg = <0x54002000 0x400>; interrupts = ; - clocks = <&clk_axi>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 6052243..2cc9341 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -151,6 +151,43 @@ }; }; + dcmi_pins_c: dcmi-2 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ;/* DCMI_D9 */ + bias-pull-up; + }; + }; + + dcmi_sleep_pins_c: dcmi-sleep-2 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ;/* DCMI_D9 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = , /* ETH_RGMII_CLK125 */ @@ -923,6 +960,21 @@ }; }; + mco1_pins_a: mco1-0 { + pins { + pinmux = ; /* MCO1 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + mco1_sleep_pins_a: mco1-sleep-0 { + pins { + pinmux = ; /* MCO1 */ + }; + }; + mco2_pins_a: mco2-0 { pins { pinmux = ; /* MCO2 */ @@ -978,6 +1030,26 @@ }; }; + m_can1_pins_c: m-can1-2 { + pins1 { + pinmux = ; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_c: m_can1-sleep-2 { + pins { + pinmux = , /* CAN1_TX */ + ; /* CAN1_RX */ + }; + }; + m_can2_pins_a: m-can2-0 { pins1 { pinmux = ; /* CAN2_TX */ @@ -1794,15 +1866,30 @@ spi2_pins_a: spi2-0 { pins1 { - pinmux = , /* SPI1_SCK */ - ; /* SPI1_MOSI */ + pinmux = , /* SPI2_SCK */ + ; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI2_MISO */ + bias-disable; + }; + }; + + spi2_pins_b: spi2-1 { + pins1 { + pinmux = , /* SPI2_SCK */ + ; /* SPI2_MOSI */ bias-disable; drive-push-pull; slew-rate = <1>; }; pins2 { - pinmux = ; /* SPI1_MISO */ + pinmux = ; /* SPI2_MISO */ bias-disable; }; }; @@ -1884,6 +1971,49 @@ }; }; + uart4_pins_d: uart4-3 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_idle_pins_d: uart4-idle-3 { + pins1 { + pinmux = ; /* UART4_TX */ + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_d: uart4-sleep-3 { + pins { + pinmux = , /* UART4_TX */ + ; /* UART4_RX */ + }; + }; + + uart5_pins_a: uart5-0 { + pins1 { + pinmux = ; /* UART5_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART5_RX */ + bias-disable; + }; + }; + uart7_pins_a: uart7-0 { pins1 { pinmux = ; /* UART7_TX */ @@ -2183,6 +2313,47 @@ }; }; + usart3_pins_e: usart3-4 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART3_RX */ + ; /* USART3_CTS_NSS */ + bias-pull-up; + }; + }; + + usart3_idle_pins_e: usart3-idle-4 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = ; /* USART3_RX */ + bias-pull-up; + }; + }; + + usart3_sleep_pins_e: usart3-sleep-4 { + pins { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + , /* USART3_CTS_NSS */ + ; /* USART3_RX */ + }; + }; + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = ; /* OTG_ID */ diff --git a/arch/arm/boot/dts/stm32mp15-scmi.dtsi b/arch/arm/boot/dts/stm32mp15-scmi.dtsi new file mode 100644 index 0000000..543f24c --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15-scmi.dtsi @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scmi: scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + shmem = <&scmi_shm>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + + scmi_voltd: protocol@17 { + reg = <0x17>; + + scmi_reguls: regulators { + #address-cells = <1>; + #size-cells = <0>; + + scmi_reg11: reg11@0 { + reg = <0>; + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + scmi_reg18: reg18@1 { + voltd-name = "reg18"; + reg = <1>; + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + scmi_usb33: usb33@2 { + reg = <2>; + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; + }; + + soc { + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + }; + }; + }; +}; + +®11 { + status = "disabled"; +}; + +®18 { + status = "disabled"; +}; + +&usb33 { + status = "disabled"; +}; + +&usbotg_hs { + usb33d-supply = <&scmi_usb33>; +}; + +&usbphyc { + vdda1v1-supply = <&scmi_reg11>; + vdda1v8-supply = <&scmi_reg18>; +}; + +/delete-node/ &clk_hse; +/delete-node/ &clk_hsi; +/delete-node/ &clk_lse; +/delete-node/ &clk_lsi; +/delete-node/ &clk_csi; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 1b2fd34..742fdee 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -115,33 +115,6 @@ status = "disabled"; }; - firmware { - optee: optee { - compatible = "linaro,optee-tz"; - method = "smc"; - status = "disabled"; - }; - - scmi: scmi { - compatible = "linaro,scmi-optee"; - #address-cells = <1>; - #size-cells = <0>; - linaro,optee-channel-id = <0>; - shmem = <&scmi_shm>; - status = "disabled"; - - scmi_clk: protocol@14 { - reg = <0x14>; - #clock-cells = <1>; - }; - - scmi_reset: protocol@16 { - reg = <0x16>; - #reset-cells = <1>; - }; - }; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -149,20 +122,6 @@ interrupt-parent = <&intc>; ranges; - scmi_sram: sram@2ffff000 { - compatible = "mmio-sram"; - reg = <0x2ffff000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2ffff000 0x1000>; - - scmi_shm: scmi-sram@0 { - compatible = "arm,scmi-shmem"; - reg = <0 0x80>; - status = "disabled"; - }; - }; - timers2: timer@40000000 { #address-cells = <1>; #size-cells = <0>; @@ -606,7 +565,7 @@ compatible = "st,stm32-cec"; reg = <0x40016000 0x400>; interrupts = ; - clocks = <&rcc CEC_K>, <&clk_lse>; + clocks = <&rcc CEC_K>, <&rcc CEC>; clock-names = "cec", "hdmi-cec"; status = "disabled"; }; @@ -1158,10 +1117,9 @@ reg = <0x4c001000 0x400>; st,proc-id = <0>; interrupts-extended = - <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <&exti 61 1>; - interrupt-names = "rx", "tx", "wakeup"; + <&exti 61 1>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; clocks = <&rcc IPCC>; wakeup-source; status = "disabled"; @@ -1515,7 +1473,7 @@ usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; - clocks = <&rcc USBH>, <&usbphyc>; + clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = ; status = "disabled"; @@ -1524,7 +1482,7 @@ usbh_ehci: usb@5800d000 { compatible = "generic-ehci"; reg = <0x5800d000 0x1000>; - clocks = <&rcc USBH>; + clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = ; companion = <&usbh_ohci>; diff --git a/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts b/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts new file mode 100644 index 0000000..c8b9818 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut + * + * DHCOR STM32MP1 variant: + * DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG + * DHCOR PCB number: 586-100 or newer + * DRC Compact PCB number: 627-100 or newer + */ + +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcor-som.dtsi" +#include "stm32mp15xx-dhcor-drc-compact.dtsi" + +/ { + model = "DH electronics STM32MP153C DHCOR DRC Compact"; + compatible = "dh,stm32mp153c-dhcor-drc-compact", + "dh,stm32mp153c-dhcor-som", + "st,stm32mp153"; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_c>; + pinctrl-1 = <&m_can1_sleep_pins_c>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts index e3d3f3f..e539cc8 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "stm32mp157a-dk1.dts" +#include "stm32mp15-scmi.dtsi" / { model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board"; @@ -28,6 +29,10 @@ clocks = <&scmi_clk CK_SCMI_MPU>; }; +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + &gpioz { clocks = <&scmi_clk CK_SCMI_GPIOZ>; }; @@ -54,10 +59,6 @@ resets = <&scmi_reset RST_SCMI_MCU>; }; -&optee { - status = "okay"; -}; - &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; @@ -76,11 +77,3 @@ &rtc { clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; }; - -&scmi { - status = "okay"; -}; - -&scmi_shm { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts index 45dcd29..97e4f94 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "stm32mp157c-dk2.dts" +#include "stm32mp15-scmi.dtsi" / { model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board"; @@ -34,6 +35,7 @@ }; &dsi { + phy-dsi-supply = <&scmi_reg18>; clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; }; @@ -63,10 +65,6 @@ resets = <&scmi_reset RST_SCMI_MCU>; }; -&optee { - status = "okay"; -}; - &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; @@ -85,11 +83,3 @@ &rtc { clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; }; - -&scmi { - status = "okay"; -}; - -&scmi_shm { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts index 458e0ca..9cf0a44 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "stm32mp157c-ed1.dts" +#include "stm32mp15-scmi.dtsi" / { model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter"; @@ -33,6 +34,10 @@ resets = <&scmi_reset RST_SCMI_CRYP1>; }; +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + &gpioz { clocks = <&scmi_clk CK_SCMI_GPIOZ>; }; @@ -59,10 +64,6 @@ resets = <&scmi_reset RST_SCMI_MCU>; }; -&optee { - status = "okay"; -}; - &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; @@ -81,11 +82,3 @@ &rtc { clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; }; - -&scmi { - status = "okay"; -}; - -&scmi_shm { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts index df9c113..3b9dd6f 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "stm32mp157c-ev1.dts" +#include "stm32mp15-scmi.dtsi" / { model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother"; @@ -35,6 +36,7 @@ }; &dsi { + phy-dsi-supply = <&scmi_reg18>; clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; }; @@ -68,10 +70,6 @@ resets = <&scmi_reset RST_SCMI_MCU>; }; -&optee { - status = "okay"; -}; - &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; @@ -90,11 +88,3 @@ &rtc { clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; }; - -&scmi { - status = "okay"; -}; - -&scmi_shm { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 76c54b0..9093307 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -126,6 +126,22 @@ }; }; +&dcmi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_c>; + pinctrl-1 = <&dcmi_sleep_pins_c>; + status = "disabled"; + + port { + dcmi_0: endpoint { + remote-endpoint = <&stmipi_2>; + bus-type = <5>; + bus-width = <8>; + pclk-sample = <0>; + }; + }; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_c>; @@ -219,6 +235,45 @@ }; &i2c4 { + stmipi: stmipi@14 { + compatible = "st,st-mipid02"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mco1_pins_a>; + pinctrl-1 = <&mco1_sleep_pins_a>; + reg = <0x14>; + clocks = <&rcc CK_MCO1>; + clock-names = "xclk"; + assigned-clocks = <&rcc CK_MCO1>; + assigned-clock-parents = <&rcc CK_HSE>; + assigned-clock-rates = <24000000>; + VDDE-supply = <&v1v8>; + VDDIN-supply = <&v1v8>; + reset-gpios = <&gpioz 0 GPIO_ACTIVE_LOW>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + stmipi_0: endpoint { + }; + }; + + port@2 { + reg = <2>; + stmipi_2: endpoint { + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + remote-endpoint = <&dcmi_0>; + }; + }; + }; + }; + hdmi-transmitter@3d { compatible = "adi,adv7513"; reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi new file mode 100644 index 0000000..27477bb --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2022 Marek Vasut + */ + +/ { + aliases { + ethernet0 = ðernet0; + ethernet1 = &ksz8851; + mmc0 = &sdmmc1; + rtc0 = &hwrtc; + rtc1 = &rtc; + serial0 = &uart4; + serial1 = &uart8; + serial2 = &usart3; + serial3 = &uart5; + spi0 = &qspi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "yellow:user0"; + gpios = <&gpioz 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "red:user1"; + gpios = <&gpioz 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpioh 2 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; +}; + +&adc { /* X11 ADC inputs */ + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_b>; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,adc-channels = <0 1 6>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <0 1 2>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_c>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + + phy0: ethernet-phy@7 { + reg = <7>; + + rxc-skew-ps = <1500>; + rxdv-skew-ps = <540>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + + txc-skew-ps = <1440>; + txen-skew-ps = <540>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <420>; + txd3-skew-ps = <420>; + }; + }; +}; + +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_b>; + pinctrl-1 = <&fmc_sleep_pins_b>; + status = "okay"; + + ksz8851: ethernet@1,0 { + compatible = "micrel,ks8851-mll"; + reg = <1 0x0 0x2>, <1 0x2 0x20000>; + interrupt-parent = <&gpioc>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + bank-width = <2>; + + /* Timing values are in nS */ + st,fmc2-ebi-cs-mux-enable; + st,fmc2-ebi-cs-transaction-type = <4>; + st,fmc2-ebi-cs-buswidth = <16>; + st,fmc2-ebi-cs-address-setup-ns = <5>; + st,fmc2-ebi-cs-address-hold-ns = <5>; + st,fmc2-ebi-cs-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-data-setup-ns = <45>; + st,fmc2-ebi-cs-data-hold-ns = <1>; + st,fmc2-ebi-cs-write-address-setup-ns = <5>; + st,fmc2-ebi-cs-write-address-hold-ns = <5>; + st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>; + st,fmc2-ebi-cs-write-data-setup-ns = <45>; + st,fmc2-ebi-cs-write-data-hold-ns = <1>; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "DRCC-VAR2", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "DRCC-GPIO0", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "DRCC-GPIO5", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "DRCC-HW2", + "DRCC-GPIO4", "", "", "", + "DRCC-HW1", "DRCC-HW0", "", "DRCC-VAR1", + "DRCC-VAR0", "", "", "DRCC-GPIO6"; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "DRCC-GPIO2", + "", "DRCC-GPIO1", "", "", + "", "", "", ""; +}; + +&i2c1 { /* X11 I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + hwrtc: rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&sdmmc1 { /* MicroSD */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; + +&sdmmc2 { /* eMMC */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; + +&sdmmc3 { /* SDIO Wi-Fi */ + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + bus-width = <4>; + mmc-ddr-3_3v; + st,neg-edge; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + status = "okay"; +}; + +&spi2 { /* X11 SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + cs-gpios = <&gpioi 0 0>; + status = "disabled"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&uart4 { + label = "UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_d>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart5 { /* X11 UART */ + label = "X11-UART5"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + label = "RS485-1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart3 { /* RS485 or RS232 */ + label = "RS485-2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usart3_pins_e>; + pinctrl-1 = <&usart3_sleep_pins_e>; + uart-has-rtscts; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi index 7517231..9937b28 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi @@ -18,6 +18,11 @@ }; }; +&vdd { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; +}; + &pwr_regulators { vdd-supply = <&vdd_io>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 6336c3c..134a798 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -119,8 +119,8 @@ vdd: buck3 { regulator-name = "vdd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-initial-mode = <0>; regulator-over-current-protection; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi index 6706d83..935b708 100644 --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -50,12 +50,6 @@ no-map; }; }; - - reg_sip_eeprom: regulator_eeprom { - compatible = "regulator-fixed"; - regulator-name = "sip_eeprom"; - regulator-always-on; - }; }; &i2c4 { @@ -78,6 +72,7 @@ compatible = "st,stpmic1-regulators"; ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; ldo6-supply = <&v3v3>; pwr_sw1-supply = <&bst_out>; @@ -203,7 +198,7 @@ sip_eeprom: eeprom@50 { compatible = "atmel,24c32"; - vcc-supply = <®_sip_eeprom>; + vcc-supply = <&vdd>; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 0a562b2..62e7aa5 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -63,7 +63,7 @@ compatible = "gpio-keys-polled"; poll-interval = <20>; - left-joystick-left { + event-left-joystick-left { label = "Left Joystick Left"; linux,code = ; linux,input-type = ; @@ -71,7 +71,7 @@ gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ }; - left-joystick-right { + event-left-joystick-right { label = "Left Joystick Right"; linux,code = ; linux,input-type = ; @@ -79,7 +79,7 @@ gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ }; - left-joystick-up { + event-left-joystick-up { label = "Left Joystick Up"; linux,code = ; linux,input-type = ; @@ -87,7 +87,7 @@ gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ }; - left-joystick-down { + event-left-joystick-down { label = "Left Joystick Down"; linux,code = ; linux,input-type = ; @@ -95,7 +95,7 @@ gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ }; - right-joystick-left { + event-right-joystick-left { label = "Right Joystick Left"; linux,code = ; linux,input-type = ; @@ -103,7 +103,7 @@ gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ }; - right-joystick-right { + event-right-joystick-right { label = "Right Joystick Right"; linux,code = ; linux,input-type = ; @@ -111,7 +111,7 @@ gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ }; - right-joystick-up { + event-right-joystick-up { label = "Right Joystick Up"; linux,code = ; linux,input-type = ; @@ -119,7 +119,7 @@ gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ }; - right-joystick-down { + event-right-joystick-down { label = "Right Joystick Down"; linux,code = ; linux,input-type = ; @@ -127,7 +127,7 @@ gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ }; - dpad-left { + event-dpad-left { label = "DPad Left"; linux,code = ; linux,input-type = ; @@ -135,7 +135,7 @@ gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ }; - dpad-right { + event-dpad-right { label = "DPad Right"; linux,code = ; linux,input-type = ; @@ -143,7 +143,7 @@ gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ }; - dpad-up { + event-dpad-up { label = "DPad Up"; linux,code = ; linux,input-type = ; @@ -151,7 +151,7 @@ gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ }; - dpad-down { + event-dpad-down { label = "DPad Down"; linux,code = ; linux,input-type = ; @@ -159,49 +159,49 @@ gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ }; - x { + event-x { label = "Button X"; linux,code = ; gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ }; - y { + event-y { label = "Button Y"; linux,code = ; gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ }; - a { + event-a { label = "Button A"; linux,code = ; gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ }; - b { + event-b { label = "Button B"; linux,code = ; gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ }; - select { + event-select { label = "Select Button"; linux,code = ; gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ }; - start { + event-start { label = "Start Button"; linux,code = ; gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ }; - top-left { + event-top-left { label = "Top Left Button"; linux,code = ; gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ }; - top-right { + event-top-right { label = "Top Right Button"; linux,code = ; gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 1ac8237..a332d61 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -77,19 +77,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Key Back"; linux,code = ; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - home { + key-home { label = "Key Home"; linux,code = ; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - menu { + key-menu { label = "Key Menu"; linux,code = ; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index 2ce361f..3a6c4bd 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -67,18 +67,18 @@ compatible = "gpio-leds"; led-0 { - label ="licheepi:red:usr"; + label = "licheepi:red:usr"; gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; }; led-1 { - label ="licheepi:green:usr"; + label = "licheepi:green:usr"; gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; default-state = "on"; }; led-2 { - label ="licheepi:blue:usr"; + label = "licheepi:blue:usr"; gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 715d748..70e634b 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -46,6 +46,7 @@ #include #include +#include #include / { @@ -598,7 +599,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -612,7 +613,8 @@ , , ; - clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1319,7 +1321,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&rtc 0>, <&osc24M>, + clocks = <&rtc CLK_OSC32K>, <&osc24M>, <&ccu CLK_PLL_PERIPH>, <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; @@ -1354,7 +1356,7 @@ ir_clk: ir_clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; - clocks = <&rtc 0>, <&osc24M>; + clocks = <&rtc CLK_OSC32K>, <&osc24M>; clock-output-names = "ir"; }; @@ -1385,7 +1387,7 @@ interrupt-parent = <&r_intc>; interrupts = , ; - clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 4f8d55d..928b86a 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -78,19 +78,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Key Back"; linux,code = ; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - home { + key-home { label = "Key Home"; linux,code = ; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - menu { + key-menu { label = "Key Menu"; linux,code = ; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 4461d509..1a262a0 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -44,6 +44,7 @@ #include +#include #include #include @@ -329,7 +330,7 @@ ccu: clock@1c20000 { reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -340,7 +341,8 @@ reg = <0x01c20800 0x400>; interrupt-parent = <&r_intc>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -810,7 +812,7 @@ reg = <0x01f02c00 0x400>; interrupt-parent = <&r_intc>; interrupts = ; - clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index d5c7b79..d729b7c 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -47,10 +47,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -106,7 +106,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -181,7 +181,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index f19ed981d..3706216 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -169,7 +169,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index cd9f655..27a0d51 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -93,10 +93,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -125,7 +125,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts index ff0a7a9..f5c8ccc 100644 --- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts +++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts @@ -39,16 +39,16 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ }; - user { + key-user { label = "user"; linux,code = ; gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts index 8e7dfcf..43641cb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -37,10 +37,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - k1 { + key-0 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ @@ -90,7 +90,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; @@ -151,7 +151,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts index cd3df12..9e1a33f 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -127,7 +127,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts index 26e2e61..42cd113 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts @@ -46,7 +46,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; @@ -147,7 +147,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index a9f749f..cf8413f 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -73,10 +73,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - k1 { + key-0 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 9daffd9..f1f9dbe 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -88,16 +88,16 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw2 { + switch-2 { label = "sw2"; linux,code = ; gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; }; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 6f9c97a..305b34a 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -87,10 +87,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 4759ba3..59f6f6d 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -86,10 +86,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 90f75fa..b96e015 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -86,10 +86,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index bf5b5e2..bc39468 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -91,7 +91,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -283,7 +283,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo1>; vddio-supply = <®_aldo3>; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index a6a1087..28197bbc 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -43,6 +43,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include @@ -113,6 +114,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi new file mode 100644 index 0000000..649928b --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi @@ -0,0 +1,52 @@ +/{ + cpu0_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1000000 1000000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1100000 1100000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1160000 1160000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1240000 1240000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1300000 1300000 1300000>; + clock-latency-ns = <2000000>; + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu0_opp_table>; +}; diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi index 265e0fa..9f39b5a 100644 --- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi +++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi @@ -5,6 +5,11 @@ // Copyright (C) 2017 Icenowy Zheng #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 03d3e5f..4ef26d8 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -42,6 +42,7 @@ */ #include +#include #include #include #include @@ -84,24 +85,36 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; }; @@ -117,6 +130,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal: gpu-thermal { @@ -485,7 +522,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -504,7 +541,8 @@ compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1231,7 +1269,7 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts index 6931aaa..9f47252 100644 --- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts +++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include @@ -88,6 +89,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 084323d..db194c6 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -42,6 +42,7 @@ */ #include +#include #include #include #include @@ -321,7 +322,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -342,7 +343,8 @@ reg = <0x01c20800 0x400>; interrupts = , ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index 4795455..4348710 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -42,6 +42,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include @@ -107,6 +108,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi new file mode 100644 index 0000000..493d323 --- /dev/null +++ b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Sunplus SP7021 + * + * Copyright (C) 2021 Sunplus Technology Co. + */ + +#include "sunplus-sp7021.dtsi" +#include + +/ { + compatible = "sunplus,sp7021-achip", "sunplus,sp7021"; + model = "Sunplus SP7021 (CA7)"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-frequency = <931000000>; + }; + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clock-frequency = <931000000>; + }; + cpu2: cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + clock-frequency = <931000000>; + }; + cpu3: cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + clock-frequency = <931000000>; + }; + }; + + gic: interrupt-controller@9f101000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x9f101000 0x1000>, + <0x9f102000 0x2000>, + <0x9f104000 0x2000>, + <0x9f106000 0x2000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = ; + arm,cpu-registers-not-fw-configured; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + soc@9c000000 { + intc: interrupt-controller@780 { + interrupt-parent = <&gic>; + interrupts = , /* EXT_INT0 */ + ; /* EXT_INT1 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts new file mode 100644 index 0000000..d5c5ffc --- /dev/null +++ b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Sunplus SP7021 Demo V3 SBC board + * + * Copyright (C) Sunplus Technology Co. + */ + +/dts-v1/; + +#include "sunplus-sp7021-achip.dtsi" + +/ { + compatible = "sunplus,sp7021-demo-v3", "sunplus,sp7021"; + model = "Sunplus SP7021/CA7/Demo_V3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus-sp7021.dtsi new file mode 100644 index 0000000..7dc4ce3 --- /dev/null +++ b/arch/arm/boot/dts/sunplus-sp7021.dtsi @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Sunplus SP7021 + * + * Copyright (C) 2021 Sunplus Technology Co. + */ + +#include +#include +#include +#include +#include + +#define XTAL 27000000 + +/ { + compatible = "sunplus,sp7021"; + model = "Sunplus SP7021"; + + clocks { + extclk: osc0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = ; + clock-output-names = "extclk"; + }; + }; + + soc@9c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9c000000 0x400000>; + interrupt-parent = <&intc>; + + clkc: clock-controller@4 { + compatible = "sunplus,sp7021-clkc"; + reg = <0x4 0x28>, + <0x200 0x44>, + <0x268 0x04>; + clocks = <&extclk>; + #clock-cells = <1>; + }; + + intc: interrupt-controller@780 { + compatible = "sunplus,sp7021-intc"; + reg = <0x780 0x80>, <0xa80 0x80>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + otp: otp@af00 { + compatible = "sunplus,sp7021-ocotp"; + reg = <0xaf00 0x34>, <0xaf80 0x58>; + reg-names = "hb_gpio", "otprx"; + clocks = <&clkc CLK_OTPRX>; + resets = <&rstc RST_OTPRX>; + #address-cells = <1>; + #size-cells = <1>; + + therm_calib: thermal-calibration@14 { + reg = <0x14 0x3>; + }; + disc_vol: disconnect-voltage@18 { + reg = <0x18 0x2>; + }; + mac_addr0: mac-address0@34 { + reg = <0x34 0x6>; + }; + mac_addr1: mac-address1@3a { + reg = <0x3a 0x6>; + }; + }; + + pctl: pinctrl@100 { + compatible = "sunplus,sp7021-pctl"; + reg = <0x100 0x100>, + <0x300 0x100>, + <0x32e4 0x1C>, + <0x80 0x20>; + reg-names = "moon2", "gpioxt", "first", "moon1"; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clkc CLK_GPIO>; + resets = <&rstc RST_GPIO>; + + emac_pins: pinmux-emac-pins { + sunplus,pins = < + SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0) + SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0) + SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0) + SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0) + SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0) + SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0) + SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0) + SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0) + SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0) + SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0) + SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0) + SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0) + SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0) + SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0) + SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0) + SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0) + SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0) + >; + sunplus,zerofunc = < + MUXF_L2SW_LED_FLASH0 + MUXF_L2SW_LED_FLASH1 + MUXF_L2SW_LED_ON0 + MUXF_L2SW_LED_ON1 + MUXF_DAISY_MODE + >; + }; + + emmc_pins: pinmux-emmc-pins { + function = "CARD0_EMMC"; + groups = "CARD0_EMMC"; + }; + + leds_pins: pinmux-leds-pins { + sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >; + }; + + sdcard_pins: pinmux-sdcard-pins { + function = "SD_CARD"; + groups = "SD_CARD"; + sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >; + }; + + spi0_pins: pinmux-spi0-pins { + sunplus,pins = < + SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0) + SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0) + SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0) + SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0) + SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0) + >; + }; + + uart0_pins: pinmux-uart0-pins { + function = "UA0"; + groups = "UA0"; + }; + + uart1_pins: pinmux-uart1-pins { + sunplus,pins = < + SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0) + SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0) + >; + }; + + uart2_pins: pinmux-uart2-pins { + sunplus,pins = < + SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0) + SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0) + SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0) + SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0) + >; + }; + + uart4_pins: pinmux-uart4-pins { + sunplus,pins = < + SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0) + SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0) + SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0) + SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0) + >; + }; + }; + + rstc: reset@54 { + compatible = "sunplus,sp7021-reset"; + reg = <0x54 0x28>; + #reset-cells = <1>; + }; + + rtc: rtc@3a00 { + compatible = "sunplus,sp7021-rtc"; + reg = <0x3a00 0x80>; + reg-names = "rtc"; + clocks = <&clkc CLK_RTC>; + resets = <&rstc RST_RTC>; + interrupts = <163 IRQ_TYPE_EDGE_RISING>; + }; + + spi_controller0: spi@2d80 { + compatible = "sunplus,sp7021-spi"; + reg = <0x2d80 0x80>, <0x2e00 0x80>; + reg-names = "master", "slave"; + interrupts = <144 IRQ_TYPE_LEVEL_HIGH>, + <146 IRQ_TYPE_LEVEL_HIGH>, + <145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_0>; + resets = <&rstc RST_SPI_COMBO_0>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>, + <&pctl 28 GPIO_ACTIVE_LOW>; + }; + + spi_controller1: spi@f480 { + compatible = "sunplus,sp7021-spi"; + reg = <0xf480 0x80>, <0xf500 0x80>; + reg-names = "master", "slave"; + interrupts = <67 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_1>; + resets = <&rstc RST_SPI_COMBO_1>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + spi_controller2: spi@f600 { + compatible = "sunplus,sp7021-spi"; + reg = <0xf600 0x80>, <0xf680 0x80>; + reg-names = "master", "slave"; + interrupts = <70 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_2>; + resets = <&rstc RST_SPI_COMBO_2>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + spi_controller3: spi@f780 { + compatible = "sunplus,sp7021-spi"; + reg = <0xf780 0x80>, <0xf800 0x80>; + reg-names = "master", "slave"; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>, + <75 IRQ_TYPE_LEVEL_HIGH>, + <74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma_w", "master_risc", "slave_risc"; + clocks = <&clkc CLK_SPI_COMBO_3>; + resets = <&rstc RST_SPI_COMBO_3>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + uart0: serial@900 { + compatible = "sunplus,sp7021-uart"; + reg = <0x900 0x80>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA0>; + resets = <&rstc RST_UA0>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + }; + + uart1: serial@980 { + compatible = "sunplus,sp7021-uart"; + reg = <0x980 0x80>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA1>; + resets = <&rstc RST_UA1>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; + }; + + uart2: serial@800 { + compatible = "sunplus,sp7021-uart"; + reg = <0x800 0x80>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA2>; + resets = <&rstc RST_UA2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; + }; + + uart3: serial@880 { + compatible = "sunplus,sp7021-uart"; + reg = <0x880 0x80>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA3>; + resets = <&rstc RST_UA3>; + status = "disabled"; + }; + + uart4: serial@8780 { + compatible = "sunplus,sp7021-uart"; + reg = <0x8780 0x80>; + interrupts = <134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLK_UA4>; + resets = <&rstc RST_UA4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + system-led { + label = "system-led"; + gpios = <&pctl 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index d03f585..e899d14 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -77,10 +77,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -101,7 +101,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -221,7 +221,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi index fc67e30..60804b0 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi @@ -22,7 +22,7 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -124,7 +124,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index d7e9f97..09aefb4 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -40,6 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include #include #include #include @@ -386,7 +387,7 @@ ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -398,7 +399,8 @@ interrupt-parent = <&r_intc>; interrupts = , ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -818,7 +820,7 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; @@ -878,7 +880,7 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; @@ -931,7 +933,8 @@ reg = <0x01f02c00 0x400>; interrupt-parent = <&r_intc>; interrupts = ; - clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi index 9e14fe5..89731bb 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -42,10 +42,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = ; gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts index b791ce9..284209b 100644 --- a/arch/arm/boot/dts/tegra114-asus-tf701t.dts +++ b/arch/arm/boot/dts/tegra114-asus-tf701t.dts @@ -684,7 +684,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; - power { + button-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; @@ -692,14 +692,14 @@ wakeup-source; }; - volume-up { + button-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <10>; }; - volume-down { + button-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = ; @@ -715,7 +715,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gpio_hall_sensor_default>; - hall-sensor { + switch-hall-sensor { label = "Hall Effect Sensor"; gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>; linux,input-type = ; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 658edfb..fffd62b 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1161,26 +1161,26 @@ gpio-keys { compatible = "gpio-keys"; - home { + key-home { label = "Home"; gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; linux,code = ; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = ; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 2498cf1..b9d0000 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -1025,19 +1025,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Back"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - home { + key-home { label = "Home"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = ; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index ef8f722..f02d8c7 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -282,20 +282,20 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - volume_down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; linux,code = ; }; - volume_up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 3209554..bce12b3 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -191,7 +191,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts index 814257c..800283a 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts @@ -193,7 +193,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 28b889e..f41dd40 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1886,7 +1886,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index a93cfb4..13061ab 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -603,7 +603,7 @@ gpio-keys { compatible = "gpio-keys"; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; linux,input-type = <5>; @@ -612,7 +612,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 6a9592ce..8f40fcf 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1078,7 +1078,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index a170a4b..dac6d02 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -417,7 +417,7 @@ vddio-supply = <&vdd_1v8_sys>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -905,7 +905,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; linux,code = ; @@ -914,7 +914,7 @@ wakeup-source; }; - rotation-lock { + key-rotation-lock { label = "Rotate-lock"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>; linux,code = ; @@ -922,7 +922,7 @@ debounce-interval = <10>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; linux,code = ; @@ -931,7 +931,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts index a054d39..bf797a1 100644 --- a/arch/arm/boot/dts/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts @@ -477,7 +477,7 @@ vddio-supply = <&vdd_1v8_sys>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -980,7 +980,7 @@ gpio-keys { compatible = "gpio-keys"; - dock-hall-sensor { + switch-dock-hall-sensor { label = "Lid"; gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; linux,input-type = ; @@ -990,7 +990,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = ; @@ -999,7 +999,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; linux,code = ; @@ -1008,7 +1008,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts index d2a3bf9..cb1190b 100644 --- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts @@ -209,7 +209,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts index 00ecbbd..53487cc 100644 --- a/arch/arm/boot/dts/tegra20-colibri-iris.dts +++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts @@ -191,7 +191,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 79b6b79..11f21ae 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -648,7 +648,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 0fb4b1f..48fe628 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -596,7 +596,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "Wakeup"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index c4a6a6a..5b4c5ef 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -800,14 +800,14 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; - lid { + switch-lid { label = "Lid"; gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>; linux,input-type = <5>; /* EV_SW */ diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9d0c867..dc51835 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -388,7 +388,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index b0a0097..caa17e8 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -628,7 +628,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 93b83b3..ad968ff 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -181,7 +181,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts index fbfa75e..c172fdb 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts @@ -182,7 +182,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 2c2ad2a..ee683c5 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -63,7 +63,7 @@ gpio@6000d000 { init-mode-hog { gpio-hog; - gpios = , + gpios = , , ; output-low; @@ -820,7 +820,7 @@ vddio-supply = <&vdd_1v8>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -833,7 +833,7 @@ status = "okay"; touchscreen@10 { - compatible ="elan,ektf3624"; + compatible = "elan,ektf3624"; reg = <0x10>; interrupt-parent = <&gpio>; @@ -1124,7 +1124,7 @@ gpio-keys { compatible = "gpio-keys"; - hall-sensor { + switch-hall-sensor { label = "Lid"; gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>; linux,input-type = ; @@ -1134,7 +1134,7 @@ wakeup-source; }; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; linux,code = ; @@ -1143,7 +1143,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; linux,code = ; @@ -1152,7 +1152,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi index cd63e0e..1b241f0 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi @@ -25,7 +25,7 @@ gpio@6000d000 { init-mode-3g-hog { gpio-hog; - gpios = , + gpios = , , , , diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi index c662ab2..c27e70d 100644 --- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi @@ -1511,7 +1511,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - dock-hall-sensor { + switch-dock-hall-sensor { label = "Lid sensor"; gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>; linux,input-type = ; @@ -1521,7 +1521,7 @@ wakeup-source; }; - lineout-detect { + switch-lineout-detect { label = "Audio dock line-out detect"; gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>; linux,input-type = ; @@ -1544,7 +1544,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; linux,code = ; @@ -1553,7 +1553,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; linux,code = ; @@ -1562,7 +1562,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index ba257ed..540530c 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -685,7 +685,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power"; interrupt-parent = <&pmic>; interrupts = <2 0>; @@ -694,14 +694,14 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <10>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 7d4a6ca..8dbc15f9 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -145,7 +145,7 @@ gpio-keys { compatible = "gpio-keys"; - wakeup { + key-wakeup { label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 22231d45..310dff0 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -239,7 +239,7 @@ nvidia,enable-input = ; }; spdif-in-pk6 { - nvidia,pins = "spdif_in_pk6"; + nvidia,pins = "spdif_in_pk6"; nvidia,function = "hda"; nvidia,pull = ; nvidia,tristate = ; @@ -364,7 +364,7 @@ }; /* Multiplexed and therefore disabled */ cam-mclk-pcc0 { - nvidia,pins = "cam_mclk_pcc0"; + nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = ; nvidia,tristate = ; @@ -511,7 +511,7 @@ /* Colibri USBC_DET */ spdif-out-pk5 { - nvidia,pins = "spdif_out_pk5"; + nvidia,pins = "spdif_out_pk5"; nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index e58dda4..b7acea3 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -4764,7 +4764,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; debounce-interval = <10>; linux,code = ; diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts index 8ce6103..7c81f02 100644 --- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts +++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts @@ -2655,7 +2655,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - dock-insert { + switch-dock-insert { label = "Chagall Dock"; gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; linux,input-type = ; @@ -2665,7 +2665,7 @@ wakeup-source; }; - lineout-detect { + switch-lineout-detect { label = "Audio dock line-out detect"; gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>; linux,input-type = ; @@ -2688,7 +2688,7 @@ compatible = "gpio-keys"; interrupt-parent = <&gpio>; - power { + key-power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; linux,code = ; @@ -2697,7 +2697,7 @@ wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; linux,code = ; @@ -2706,7 +2706,7 @@ wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>; linux,code = ; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index cf70aff..d23201b 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -30,14 +30,14 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - sw14 { + switch-14 { label = "sw14"; gpios = <&gpio0 12 0>; linux,code = <108>; /* down */ wakeup-source; autorepeat; }; - sw13 { + switch-13 { label = "sw13"; gpios = <&gpio0 14 0>; linux,code = <103>; /* up */ diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/zynq-zturn-common.dtsi index bf5d1c4..dfb1fba 100644 --- a/arch/arm/boot/dts/zynq-zturn-common.dtsi +++ b/arch/arm/boot/dts/zynq-zturn-common.dtsi @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; autorepeat; - K1 { + key { label = "K1"; gpios = <&gpio0 0x32 0x1>; linux,code = <0x66>; diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 9252ce0..3f633ea 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -1,25 +1,22 @@ CONFIG_LOCALVERSION="gum" -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_PREEMPT=y CONFIG_EXPERT=y # CONFIG_EPOLL is not set # CONFIG_SHMEM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_GUMSTIX=y -CONFIG_PCCARD=y -CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2" +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +# CONFIG_SWAP is not set +CONFIG_SLAB=y +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=m CONFIG_UNIX=y @@ -35,6 +32,7 @@ CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y +CONFIG_PCCARD=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -48,14 +46,15 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PXA2XX=y CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_SD=m +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=m CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=m +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set CONFIG_WATCHDOG=y @@ -84,16 +83,15 @@ CONFIG_VFAT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_RUBIN=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_DEBUG_KERNEL=y # CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_USER=y CONFIG_CRYPTO=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_ARC4=m +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_PREEMPT is not set +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 5d20057..67feb06 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -1,5 +1,4 @@ CONFIG_KERNEL_XZ=y -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y @@ -17,9 +16,6 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_AIO is not set CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G4=y @@ -30,7 +26,6 @@ CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y -CONFIG_FIRMWARE_MEMMAP=y CONFIG_JUMP_LABEL=y CONFIG_STRICT_KERNEL_RWX=y # CONFIG_BLK_DEV_BSG is not set @@ -38,6 +33,10 @@ CONFIG_STRICT_KERNEL_RWX=y # CONFIG_MQ_IOSCHED_DEADLINE is not set # CONFIG_MQ_IOSCHED_KYBER is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SWAP is not set +CONFIG_SLAB_FREELIST_RANDOM=y +CONFIG_SLAB_FREELIST_HARDENED=y +# CONFIG_COMPAT_BRK is not set # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -57,12 +56,12 @@ CONFIG_NET_NCSI=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FIRMWARE_MEMMAP=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_PARTITIONED_MASTER=y CONFIG_MTD_SPI_NOR=y # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set -CONFIG_SPI_ASPEED_SMC=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y @@ -88,9 +87,9 @@ CONFIG_FTGMAC100=y # CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROSEMI is not set +# CONFIG_NET_VENDOR_NI is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NETRONOME is not set -# CONFIG_NET_VENDOR_NI is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set @@ -134,6 +133,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_ASPEED=y CONFIG_I2C_FSI=y CONFIG_SPI=y +CONFIG_SPI_ASPEED_SMC=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -244,9 +244,8 @@ CONFIG_CRYPTO_USER_API_HASH=y # CONFIG_XZ_DEC_SPARC is not set CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_REDUCED=y CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_DEBUG_INFO_REDUCED=y CONFIG_GDB_SCRIPTS=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index ae4f3c5..247ab72 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -1,5 +1,4 @@ CONFIG_KERNEL_XZ=y -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y @@ -17,9 +16,6 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_AIO is not set CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G5=y @@ -36,13 +32,16 @@ CONFIG_KEXEC=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y -CONFIG_FIRMWARE_MEMMAP=y CONFIG_JUMP_LABEL=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_MQ_IOSCHED_DEADLINE is not set # CONFIG_MQ_IOSCHED_KYBER is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SWAP is not set +CONFIG_SLAB_FREELIST_RANDOM=y +CONFIG_SLAB_FREELIST_HARDENED=y +# CONFIG_COMPAT_BRK is not set # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -70,12 +69,12 @@ CONFIG_NET_NCSI=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FIRMWARE_MEMMAP=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_PARTITIONED_MASTER=y CONFIG_MTD_SPI_NOR=y # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set -CONFIG_SPI_ASPEED_SMC=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y @@ -103,9 +102,9 @@ CONFIG_FTGMAC100=y # CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROSEMI is not set +# CONFIG_NET_VENDOR_NI is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NETRONOME is not set -# CONFIG_NET_VENDOR_NI is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set @@ -156,6 +155,7 @@ CONFIG_I2C_ASPEED=y CONFIG_I2C_FSI=y CONFIG_I2C_SLAVE=y CONFIG_SPI=y +CONFIG_SPI_ASPEED_SMC=y CONFIG_SPI_FSI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y @@ -273,9 +273,8 @@ CONFIG_CRYPTO_USER_API_HASH=y # CONFIG_XZ_DEC_SPARC is not set CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_REDUCED=y CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_DEBUG_INFO_REDUCED=y CONFIG_GDB_SCRIPTS=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig index 04c86ff..801383e 100644 --- a/arch/arm/configs/assabet_defconfig +++ b/arch/arm/configs/assabet_defconfig @@ -1,25 +1,19 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_ASSABET=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram" CONFIG_FPE_NWFPE=y CONFIG_PM=y +CONFIG_MODULES=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_SA1100_FIR=m +CONFIG_PCCARD=y +CONFIG_PCMCIA_SA1100=y CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y @@ -46,11 +40,14 @@ CONFIG_FB=y CONFIG_FB_SA1100=y # CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index db15a8b..da90ce9 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -1,5 +1,4 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y @@ -9,7 +8,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y -CONFIG_SLAB=y CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set @@ -27,8 +25,9 @@ CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 r CONFIG_KEXEC=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SWAP is not set +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -66,6 +65,7 @@ CONFIG_ATMEL_SSC=y CONFIG_EEPROM_AT24=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set @@ -139,9 +139,9 @@ CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_ATMEL_ISI=y +CONFIG_VIDEO_MT9V032=m CONFIG_VIDEO_OV2640=m CONFIG_VIDEO_OV7740=m -CONFIG_VIDEO_MT9V032=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y @@ -206,8 +206,8 @@ CONFIG_PWM_ATMEL=y CONFIG_PWM_ATMEL_HLCDC_PWM=y CONFIG_PWM_ATMEL_TCB=y CONFIG_EXT4_FS=y -CONFIG_AUTOFS_FS=m CONFIG_FANOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_UBIFS_FS=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index 4607521..bfbaa2d 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_FHANDLE=y CONFIG_AUDIT=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y @@ -21,12 +22,8 @@ CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AXXIA=y -CONFIG_GPIO_PCA953X=y CONFIG_ARM_LPAE=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_430973=y @@ -37,26 +34,24 @@ CONFIG_ARM_ERRATA_754327=y CONFIG_ARM_ERRATA_764369=y CONFIG_ARM_ERRATA_775420=y CONFIG_ARM_ERRATA_798181=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y CONFIG_PCIE_AXXIA=y CONFIG_SMP=y CONFIG_NR_CPUS=16 CONFIG_HOTPLUG_CPU=y -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_OABI_COMPAT=y CONFIG_HIGHMEM=y -CONFIG_KSM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y CONFIG_NEON=y +# CONFIG_SUSPEND is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=y -# CONFIG_SUSPEND is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_KSM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -76,6 +71,8 @@ CONFIG_INET_IPCOMP=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_BRIDGE=y # CONFIG_WIRELESS is not set +CONFIG_PCI=y +CONFIG_PCI_MSI=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y @@ -142,9 +139,10 @@ CONFIG_DP83640_PHY=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y -CONFIG_POWER_SUPPLY=y +CONFIG_GPIO_PCA953X=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_AXXIA=y +CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_ADT7475=y CONFIG_SENSORS_JC42=y CONFIG_SENSORS_LM75=y @@ -224,8 +222,9 @@ CONFIG_NFS_FSCACHE=y CONFIG_SUNRPC_DEBUG=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_XCBC=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set @@ -233,6 +232,5 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_XCBC=y CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index d9119da..506f337 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -1,26 +1,21 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_MODVERSIONS=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_BADGE4=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3" CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=m +CONFIG_MODULES=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set -CONFIG_IRDA=y -CONFIG_IRLAN=y -CONFIG_IRCOMM=y -CONFIG_IRDA_ULTRA=y -CONFIG_SA1100_FIR=y CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIVHCI=m @@ -101,10 +96,9 @@ CONFIG_MINIX_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_SMB_FS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index a9ed79b..c4d2e23 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT_VOLUNTARY=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=18 @@ -19,19 +20,12 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y -CONFIG_JUMP_LABEL=y CONFIG_CC_STACKPROTECTOR_REGULAR=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y -CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_KSM=y -CONFIG_CMA=y CONFIG_SECCOMP=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y @@ -44,9 +38,15 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=y CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set CONFIG_PM=y +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_KSM=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -63,8 +63,7 @@ CONFIG_MAC80211=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=32 +CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_CONSTANTS=y @@ -106,6 +105,7 @@ CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_DRM=y +CONFIG_DRM_V3D=y CONFIG_DRM_VC4=y CONFIG_FB_SIMPLE=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -151,7 +151,6 @@ CONFIG_BCM2835_MBOX=y CONFIG_RASPBERRYPI_POWER=y CONFIG_PWM=y CONFIG_PWM_BCM2835=y -CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -170,20 +169,22 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +# CONFIG_XZ_DEC_ARM is not set +# CONFIG_XZ_DEC_ARMTHUMB is not set +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_BOOT_PRINTK_DELAY=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_MEMORY_INIT=y CONFIG_LOCKUP_DETECTOR=y -CONFIG_SCHED_TRACER=y -CONFIG_STACK_TRACER=y -CONFIG_FUNCTION_PROFILER=y -CONFIG_TEST_KSTRTOX=y CONFIG_DEBUG_FS=y CONFIG_KGDB=y CONFIG_KGDB_KDB=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_STACK_TRACER=y +CONFIG_SCHED_TRACER=y CONFIG_STRICT_DEVMEM=y -# CONFIG_XZ_DEC_ARM is not set -# CONFIG_XZ_DEC_ARMTHUMB is not set +CONFIG_TEST_KSTRTOX=y diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig index 3f910bb..7e6f7df 100644 --- a/arch/arm/configs/cerfcube_defconfig +++ b/arch/arm/configs/cerfcube_defconfig @@ -1,23 +1,19 @@ CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_CERF=y CONFIG_SA1100_CERF_FLASH_16MB=y -CONFIG_PCCARD=m -CONFIG_PCMCIA_SA1100=m -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc" CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_FPE_FASTFPE=y CONFIG_PM=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -27,9 +23,11 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set +CONFIG_PCCARD=m +CONFIG_PCMCIA_SA1100=m CONFIG_MTD=y -CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y @@ -47,6 +45,10 @@ CONFIG_SERIAL_SA1100_CONSOLE=y CONFIG_WATCHDOG=y CONFIG_SA1100_WATCHDOG=m # CONFIG_VGA_CONSOLE is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m CONFIG_MSDOS_FS=m @@ -60,11 +62,10 @@ CONFIG_NFS_V4=y CONFIG_NFSD=m CONFIG_NFSD_V4=y CONFIG_SMB_FS=m -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_ISO8859_1=m -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig index 63a153f..92481b2 100644 --- a/arch/arm/configs/clps711x_defconfig +++ b/arch/arm/configs/clps711x_defconfig @@ -4,7 +4,6 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_RD_LZMA=y CONFIG_EMBEDDED=y -CONFIG_SLOB=y CONFIG_JUMP_LABEL=y CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_CLPS711X=y @@ -14,16 +13,13 @@ CONFIG_ARCH_CLEP7312=y CONFIG_ARCH_EDB7211=y CONFIG_ARCH_P720T=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 # CONFIG_COREDUMP is not set +CONFIG_SLOB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set -CONFIG_IRDA=y -CONFIG_IRTTY_SIR=y # CONFIG_WIRELESS is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index bb0fcd8..31f41159 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -1,29 +1,27 @@ CONFIG_LOCALVERSION="-cm-x300" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y -CONFIG_GPIO_PCA953X=y CONFIG_MACH_CM_X300=y -CONFIG_NO_HZ=y CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_FPE_NWFPE=y CONFIG_APM_EMULATION=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -55,6 +53,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_DM9000=y @@ -80,6 +79,7 @@ CONFIG_I2C_PXA=y CONFIG_SPI=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PCA953X=y # CONFIG_HWMON is not set CONFIG_PMIC_DA903X=y CONFIG_REGULATOR=y @@ -91,8 +91,6 @@ CONFIG_LCD_TDO24M=y CONFIG_BACKLIGHT_DA903X=m CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FONTS=y -CONFIG_FONT_6x11=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -147,18 +145,19 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_ISO8859_1=m -CONFIG_DEBUG_FS=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_T10DIF=y +CONFIG_FONTS=y +CONFIG_FONT_6x11=y CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index 63fa2eb..b3aab97 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -1,5 +1,4 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -9,23 +8,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y # CONFIG_PERF_EVENTS is not set -CONFIG_SLAB=y CONFIG_PROFILING=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_CNS3XXX=y +CONFIG_MACH_CNS3420VB=y +CONFIG_UNUSED_BOARD_FILES=y +CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_IOSCHED_BFQ=m -CONFIG_ARCH_MULTI_V6=y #CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_CNS3XXX=y -CONFIG_MACH_CNS3420VB=y CONFIG_DEBUG_CNS3XXX=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" +# CONFIG_SWAP is not set +CONFIG_SLAB=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -36,6 +34,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=20000 CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y # CONFIG_SATA_PMP is not set # CONFIG_ATA_SFF is not set @@ -43,9 +42,9 @@ CONFIG_ATA=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set @@ -59,6 +58,6 @@ CONFIG_AUTOFS4_FS=y CONFIG_FSCACHE=y CONFIG_TMPFS=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y # CONFIG_ARM_UNWIND is not set CONFIG_CRC_CCITT=y +CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index b29898f..8357d72 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -1,5 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y @@ -9,20 +10,20 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_PXA=y +CONFIG_MACH_COLIBRI=y +CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_PXA=y -CONFIG_MACH_COLIBRI=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y CONFIG_FPE_NWFPE=y CONFIG_PM=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -35,13 +36,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_VLAN_8021Q=m -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRTTY_SIR=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -64,22 +58,22 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PXA2XX=y CONFIG_MTD_BLOCK2MTD=y +CONFIG_MTD_ONENAND=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DISKONCHIP=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y -CONFIG_MTD_ONENAND=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=8 CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y CONFIG_NET_ETHERNET=y CONFIG_DM9000=y +CONFIG_PHYLIB=y CONFIG_HOSTAP=y CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y @@ -107,9 +101,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_USB_HID is not set CONFIG_USB=y @@ -143,13 +134,8 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m @@ -161,3 +147,11 @@ CONFIG_CRYPTO_DEFLATE=m CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_LIBCRC32C=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index f9d1102..42adfef 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -1,13 +1,13 @@ -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_COLIBRI300=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200 rw" CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y @@ -18,6 +18,7 @@ CONFIG_IPV6=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_AX88796=y @@ -48,12 +49,12 @@ CONFIG_EXT3_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_AES=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 36384fd..d35cc59 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -1,4 +1,3 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -6,22 +5,21 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_BASE_FULL is not set # CONFIG_EPOLL is not set -CONFIG_SLOB=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_COLLIE=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_PCMCIA_DEBUG=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1" CONFIG_FPE_NWFPE=y CONFIG_PM=y +# CONFIG_SWAP is not set +CONFIG_SLOB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set +CONFIG_PCCARD=y +CONFIG_PCMCIA_SA1100=y +CONFIG_PCMCIA_DEBUG=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -48,12 +46,12 @@ CONFIG_KEYBOARD_LOCOMO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_SERIO_SERPORT is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CS=y CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_SA1100=y CONFIG_SERIAL_SA1100_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HWMON is not set CONFIG_MCP_SA11X0=y CONFIG_MCP_UCB1200=y @@ -64,8 +62,6 @@ CONFIG_FB_SA1100=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LOCOMO=y @@ -80,9 +76,11 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRC_CCITT=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 96c677c..1f137f7 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -1,14 +1,11 @@ CONFIG_SYSVIPC=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y @@ -16,14 +13,14 @@ CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y CONFIG_MACH_SHEPHERD=y CONFIG_MACH_HUSKY=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_PXA2XX=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_NET=y @@ -58,11 +55,6 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -81,6 +73,8 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m +CONFIG_PCCARD=y +CONFIG_PCMCIA_PXA2XX=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -95,10 +89,15 @@ CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y +CONFIG_PCMCIA_PCNET=m +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_ASYNC=m CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,10 +105,6 @@ CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_PCNET=m -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_BSDCOMP=m CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y @@ -120,11 +115,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_I2C=y CONFIG_I2C_PXA=y CONFIG_SPI=y @@ -136,13 +131,8 @@ CONFIG_LCD_CORGI=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_SOUND=y CONFIG_SOUND_PRIME=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m @@ -159,6 +149,8 @@ CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m CONFIG_USB=m CONFIG_USB_MON=m CONFIG_USB_SL811_HCD=m @@ -220,16 +212,12 @@ CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y -CONFIG_PARTITION_ADVANCED=y +CONFIG_NFS_V4=m CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_LL=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_ECB=m @@ -252,3 +240,9 @@ CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=m +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index b58d45a..fc71a03 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,8 +1,8 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -10,34 +10,16 @@ CONFIG_CGROUPS=y CONFIG_CHECKPOINT_RESTORE=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V7=n CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_DAVINCI=y -CONFIG_ARCH_DAVINCI_DM644x=y -CONFIG_ARCH_DAVINCI_DM355=y -CONFIG_ARCH_DAVINCI_DM646x=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y -CONFIG_ARCH_DAVINCI_DM365=y -CONFIG_MACH_SFFSDR=y -CONFIG_MACH_NEUROS_OSD2=y -CONFIG_MACH_DM355_LEOPARD=y -CONFIG_MACH_MITYOMAPL138=y -CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_CMA=y CONFIG_SECCOMP=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_AUTO_ZRELADDR=y @@ -48,6 +30,13 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPUFREQ_DT=m CONFIG_CPU_IDLE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y +# CONFIG_SWAP is not set +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -65,7 +54,6 @@ CONFIG_BT_HCIUART_LL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER=m -CONFIG_DMA_CMA=y CONFIG_DA8XX_MSTPRI=y CONFIG_MTD=m CONFIG_MTD_TESTS=m @@ -95,8 +83,8 @@ CONFIG_NETCONSOLE=y CONFIG_TUN=m CONFIG_DM9000=y CONFIG_TI_DAVINCI_EMAC=y -CONFIG_LSI_ET1011C_PHY=y CONFIG_LXT_PHY=y +CONFIG_LSI_ET1011C_PHY=y CONFIG_SMSC_PHY=y CONFIG_PPP=m CONFIG_PPP_DEFLATE=m @@ -113,7 +101,6 @@ CONFIG_KEYBOARD_XTKBD=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_DM355EVM=m CONFIG_SERIO_LIBPS2=y # CONFIG_VT_CONSOLE is not set CONFIG_SERIAL_8250=y @@ -141,7 +128,6 @@ CONFIG_SYSCON_REBOOT_MODE=m CONFIG_BATTERY_LEGO_EV3=m CONFIG_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=y -CONFIG_MFD_DM355EVM_MSP=y CONFIG_TPS6507X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -262,10 +248,11 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_T10DIF=m +CONFIG_DMA_CMA=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_MUTEXES=y # CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_USER=y -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_T10DIF=m diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index f8fb475..16ed5c1 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -3,27 +3,21 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y # CONFIG_ARCH_MULTI_V6 is not set CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y CONFIG_MACH_CM_A510=y CONFIG_MACH_DOVE_DT=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MVEBU=y CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -33,6 +27,9 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MVEBU=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y @@ -53,6 +50,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y CONFIG_SATA_MV=y @@ -117,14 +115,8 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -# CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m @@ -142,3 +134,9 @@ CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y +CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index fef802b..3154125 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -5,16 +5,9 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_EP93XX=y -CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9301=y CONFIG_MACH_EDB9302=y CONFIG_MACH_EDB9302A=y @@ -23,19 +16,15 @@ CONFIG_MACH_EDB9307A=y CONFIG_MACH_EDB9312=y CONFIG_MACH_EDB9315=y CONFIG_MACH_EDB9315A=y -CONFIG_MACH_GESBC9312=y -CONFIG_MACH_MICRO9H=y -CONFIG_MACH_MICRO9M=y -CONFIG_MACH_MICRO9L=y -CONFIG_MACH_MICRO9S=y -CONFIG_MACH_SIM_ONE=y -CONFIG_MACH_SNAPPER_CL15=y CONFIG_MACH_TS72XX=y CONFIG_MACH_VISION_EP9307=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp" +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -52,8 +41,8 @@ CONFIG_IPV6=y # CONFIG_IPV6_SIT is not set # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -68,6 +57,7 @@ CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NETDEVICES=y CONFIG_EP93XX_ETH=y CONFIG_USB_RTL8150=y @@ -124,6 +114,7 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_LIBCRC32C=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_SPINLOCK=y @@ -131,4 +122,3 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index 2146adc..b4c2e64 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -3,42 +3,33 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_ESERIES=y -# CONFIG_ARM_THUMB is not set CONFIG_IWMMXT=y -CONFIG_PCCARD=y -CONFIG_PCMCIA=m -CONFIG_PCMCIA_PXA2XX=m CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y CONFIG_PM=y +CONFIG_SLAB=y +# CONFIG_COMPAT_BRK is not set CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set -CONFIG_IRDA=y -CONFIG_IRLAN=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_PXA_FICP=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_PCCARD=y +CONFIG_PCMCIA=m +CONFIG_PCMCIA_PXA2XX=m # CONFIG_STANDALONE is not set CONFIG_MTD=m CONFIG_MTD_RAW_NAND=m @@ -46,6 +37,7 @@ CONFIG_MTD_NAND_TMIO=m CONFIG_BLK_DEV_LOOP=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=m +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=m # CONFIG_SATA_PMP is not set @@ -62,8 +54,8 @@ CONFIG_KEYBOARD_GPIO=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_WM97XX=m # CONFIG_SERIO is not set -CONFIG_SERIAL_PXA=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_PXA=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set CONFIG_MFD_T7L66XB=y @@ -76,8 +68,6 @@ CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_SOUND=y CONFIG_SND=m CONFIG_SND_MIXER_OSS=m @@ -97,10 +87,11 @@ CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index aa06107..1ce74f4 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -13,12 +13,9 @@ CONFIG_BIG_LITTLE=y CONFIG_NR_CPUS=8 CONFIG_HIGHMEM=y CONFIG_SECCOMP=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" -CONFIG_ENERGY_MODEL=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y @@ -34,6 +31,7 @@ CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_ENERGY_MODEL=y CONFIG_ARM_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM_NEON=m CONFIG_CRYPTO_SHA256_ARM=m @@ -170,8 +168,6 @@ CONFIG_THERMAL_EMULATION=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC_DEV=y -CONFIG_CHROME_PLATFORMS=y -CONFIG_CROS_EC=y CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y @@ -207,19 +203,19 @@ CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m CONFIG_VIDEO_S5P_FIMC=m CONFIG_VIDEO_S5P_MIPI_CSIS=m CONFIG_VIDEO_EXYNOS_FIMC_LITE=m CONFIG_VIDEO_EXYNOS4_FIMC_IS=m -CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m -CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_S5K6A3=m CONFIG_VIDEO_S5C73M3=m +CONFIG_VIDEO_S5K6A3=m CONFIG_DRM=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y @@ -295,11 +291,11 @@ CONFIG_MMC_DW_EXYNOS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y -CONFIG_LEDS_AAT1290=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y -CONFIG_LEDS_MAX77693=y CONFIG_LEDS_MAX8997=y +CONFIG_LEDS_AAT1290=y +CONFIG_LEDS_MAX77693=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8998=y @@ -309,6 +305,8 @@ CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y +CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y CONFIG_CROS_EC_SPI=y CONFIG_COMMON_CLK_MAX77686=y @@ -319,12 +317,12 @@ CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y -CONFIG_EXYNOS5422_DMC=y CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y CONFIG_EXTCON=y CONFIG_EXTCON_MAX14577=y CONFIG_EXTCON_MAX77693=y CONFIG_EXTCON_MAX8997=y +CONFIG_EXYNOS5422_DMC=y CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_STMPE_ADC=y @@ -376,10 +374,10 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_DETECT_HUNG_TASK is not set CONFIG_PROVE_LOCKING=y diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 5d000c8..1a41391 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -1,28 +1,21 @@ CONFIG_LOCALVERSION="-ezx200910312315" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_EXPERT=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_EZX=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y @@ -33,9 +26,15 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_APM_EMULATION=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_BINFMT_MISC=m +CONFIG_SLAB=y +# CONFIG_COMPAT_BRK is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -72,6 +71,7 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NF_NAT=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_MARK=m @@ -113,7 +113,6 @@ CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m -CONFIG_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m @@ -179,15 +178,15 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -# CONFIG_WLAN is not set CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPP_FILTER=y +CONFIG_PPP_MULTILINK=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m # CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -199,9 +198,9 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=y CONFIG_INPUT_PCAP=y # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=8 CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=8 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -218,27 +217,27 @@ CONFIG_REGULATOR_PCAP=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_MEDIA_TUNER_CUSTOMISE=y +CONFIG_RADIO_TEA5764=y +# CONFIG_MEDIA_TUNER_MC44S803 is not set +# CONFIG_MEDIA_TUNER_MT2060 is not set +# CONFIG_MEDIA_TUNER_MT20XX is not set +# CONFIG_MEDIA_TUNER_MT2131 is not set +# CONFIG_MEDIA_TUNER_MT2266 is not set +# CONFIG_MEDIA_TUNER_MXL5005S is not set +# CONFIG_MEDIA_TUNER_MXL5007T is not set +# CONFIG_MEDIA_TUNER_QT1010 is not set # CONFIG_MEDIA_TUNER_SIMPLE is not set -# CONFIG_MEDIA_TUNER_TDA8290 is not set -# CONFIG_MEDIA_TUNER_TDA827X is not set # CONFIG_MEDIA_TUNER_TDA18271 is not set +# CONFIG_MEDIA_TUNER_TDA827X is not set +# CONFIG_MEDIA_TUNER_TDA8290 is not set # CONFIG_MEDIA_TUNER_TDA9887 is not set # CONFIG_MEDIA_TUNER_TEA5761 is not set # CONFIG_MEDIA_TUNER_TEA5767 is not set -# CONFIG_MEDIA_TUNER_MT20XX is not set -# CONFIG_MEDIA_TUNER_MT2060 is not set -# CONFIG_MEDIA_TUNER_MT2266 is not set -# CONFIG_MEDIA_TUNER_MT2131 is not set -# CONFIG_MEDIA_TUNER_QT1010 is not set # CONFIG_MEDIA_TUNER_XC2028 is not set # CONFIG_MEDIA_TUNER_XC5000 is not set -# CONFIG_MEDIA_TUNER_MXL5005S is not set -# CONFIG_MEDIA_TUNER_MXL5007T is not set -# CONFIG_MEDIA_TUNER_MC44S803 is not set # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set CONFIG_VIDEO_PXA27x=y # CONFIG_V4L_USB_DRIVERS is not set -CONFIG_RADIO_TEA5764=y CONFIG_FB=y CONFIG_FB_PXA=y CONFIG_FB_PXA_OVERLAY=y @@ -248,8 +247,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_MIXER_OSS=y @@ -260,8 +257,8 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_SND_PXA2XX_SOC=y -# CONFIG_USB_HID is not set CONFIG_HID_APPLE=m +# CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_GADGET=y @@ -354,14 +351,8 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_PROVE_LOCKING=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -389,3 +380,11 @@ CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_PROVE_LOCKING=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 7a32de5..5040708 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -4,18 +4,16 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set -CONFIG_MODULES=y CONFIG_ARCH_FOOTBRIDGE=y -CONFIG_ARCH_CATS=y CONFIG_ARCH_EBSA285_HOST=y CONFIG_ARCH_NETWINDER=y -CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_BINFMT_AOUT=y +CONFIG_MODULES=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +CONFIG_ACORN_PARTITION_ADFS=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -26,15 +24,6 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set CONFIG_ATM=y -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y -CONFIG_WINBOND_FIR=m CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_FIFO=y @@ -71,17 +60,17 @@ CONFIG_VORTEX=y CONFIG_NET_PCI=y CONFIG_NE2K_PCI=y CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_21285=y CONFIG_SERIAL_21285_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y CONFIG_PRINTER=m CONFIG_DS1620=y CONFIG_NWBUTTON=y @@ -99,6 +88,10 @@ CONFIG_SOUND=m CONFIG_USB=m CONFIG_USB_MON=m CONFIG_USB_PRINTER=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_EXT2_FS=y CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=m @@ -109,9 +102,6 @@ CONFIG_ADFS_FS=m CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_ACORN_PARTITION=y -CONFIG_ACORN_PARTITION_ADFS=y CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig index c02b3e4..5bd1ec5 100644 --- a/arch/arm/configs/h3600_defconfig +++ b/arch/arm/configs/h3600_defconfig @@ -1,28 +1,21 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_H3600=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 # CONFIG_CPU_FREQ_STAT is not set CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m # CONFIG_WIRELESS is not set +CONFIG_PCCARD=y +CONFIG_PCMCIA_SA1100=y CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y @@ -36,6 +29,7 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig index a67d602..d01f1a6 100644 --- a/arch/arm/configs/h5000_defconfig +++ b/arch/arm/configs/h5000_defconfig @@ -5,22 +5,21 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y # CONFIG_UID16 is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_H5000=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="keepinitrd" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y CONFIG_PM=y CONFIG_APM_EMULATION=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -43,9 +42,9 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set @@ -60,11 +59,7 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y # CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD5=y @@ -73,3 +68,7 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=y +CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_FTRACE is not set diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig index 742d18cd..b9327b2 100644 --- a/arch/arm/configs/hackkit_defconfig +++ b/arch/arm/configs/hackkit_defconfig @@ -1,17 +1,14 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_HACKKIT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell" CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y +CONFIG_MODULES=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -33,13 +30,17 @@ CONFIG_DUMMY=y CONFIG_SERIAL_SA1100=y CONFIG_SERIAL_SA1100_CONSOLE=y # CONFIG_VGA_CONSOLE is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index 74d611e..1db5356 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -1,24 +1,25 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BLK_DEV_INITRD=y CONFIG_RD_LZMA=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_CMDLINE_PARTITION=y -CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_HIP01=y CONFIG_ARCH_HIP04=y +CONFIG_ARCH_HIX5HD2=y CONFIG_SMP=y CONFIG_NR_CPUS=16 -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y CONFIG_NEON=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_PM=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMDLINE_PARTITION=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -39,20 +40,20 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_PINCTRL_SINGLE=y -CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIOLIB=y -CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_REGULATOR_GPIO=y +CONFIG_DEBUG_GPIO=y CONFIG_GPIO_DWAPB=y CONFIG_MFD_SYSCON=y +CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_POWER_RESET_SYSCON=y CONFIG_DRM=y CONFIG_FB_SIMPLE=y @@ -66,13 +67,13 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y -CONFIG_RTC_CLASS=y CONFIG_MMC_DW=y CONFIG_MMC_DW_PLTFM=y +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y -CONFIG_DW_DMAC=y CONFIG_PL330_DMA=y +CONFIG_DW_DMAC=y CONFIG_PWM=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_EXT4_FS=y @@ -81,11 +82,10 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_LOCKUP_DETECTOR=y -CONFIG_VFP=y CONFIG_VFPv3=y +CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 1d9fa77bb..bfa2a95 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -1,4 +1,3 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_NO_HZ=y @@ -8,8 +7,6 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y CONFIG_PROFILING=y CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y @@ -24,13 +21,13 @@ CONFIG_SOC_IMX1=y CONFIG_SOC_IMX25=y CONFIG_SOC_IMX27=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_PM_DEBUG=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +# CONFIG_SWAP is not set +CONFIG_SLAB=y +# CONFIG_COMPAT_BRK is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -63,6 +60,7 @@ CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 88a3602..0101253 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -13,8 +13,6 @@ CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX31=y @@ -58,6 +56,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_BINFMT_MISC=m +# CONFIG_COMPAT_BRK is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -258,14 +257,14 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_MUX=y CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_MUX=y CONFIG_VIDEO_CODA=m CONFIG_VIDEO_IMX_PXP=y -CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_OV2680=m CONFIG_VIDEO_OV5640=m CONFIG_VIDEO_OV5645=m +CONFIG_VIDEO_ADV7180=m CONFIG_IMX_IPUV3_CORE=y CONFIG_DRM=y CONFIG_DRM_MSM=y @@ -468,6 +467,7 @@ CONFIG_PRINTK_TIME=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y +# CONFIG_SLUB_DEBUG is not set # CONFIG_SCHED_DEBUG is not set CONFIG_PROVE_LOCKING=y # CONFIG_FTRACE is not set diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 5b48572..9ca43c8 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -81,5 +81,5 @@ CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index ead14c3..c16e92c 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -3,22 +3,20 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_IOP32X=y CONFIG_MACH_GLANTANK=y CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y CONFIG_MACH_N2100=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -45,6 +43,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_SATA_SIL=y CONFIG_SATA_VITESSE=y @@ -95,12 +94,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_UART_8250=y CONFIG_KEYS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_LRW=y @@ -127,3 +120,8 @@ CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y CONFIG_LIBCRC32C=y +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 960978a..6b65ac2 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -8,7 +8,6 @@ CONFIG_INITRAMFS_COMPRESSION_XZ=y CONFIG_EXPERT=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_IXP4XX=y -# CONFIG_ARM_THUMB is not set CONFIG_CPU_BIG_ENDIAN=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttyS0,115200" diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index 069f60f..3dcf89d 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -1,18 +1,14 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_SA1100=y CONFIG_SA1100_JORNADA720=y CONFIG_SA1100_JORNADA720_SSP=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y CONFIG_PM=y +CONFIG_MODULES=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -20,13 +16,12 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRCOMM=m -CONFIG_SA1100_FIR=m +CONFIG_PCCARD=y +CONFIG_PCMCIA_SA1100=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y @@ -40,9 +35,9 @@ CONFIG_KEYBOARD_HP7XX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_HP7XX=y +CONFIG_LEGACY_PTY_COUNT=32 CONFIG_SERIAL_SA1100=y CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_S1D13XXX=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index b1bcb85..68b89b9 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -1,43 +1,41 @@ -# CONFIG_SWAP is not set CONFIG_POSIX_MQUEUE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_SCHED=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_BLK_CGROUP=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set +CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARM_LPAE=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y CONFIG_PCI_KEYSTONE=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y CONFIG_ARM_PSCI=y -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_CMA=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_SUSPEND is not set CONFIG_PM=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_SWAP is not set +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -113,9 +111,11 @@ CONFIG_VLAN_8021Q=y CONFIG_CAN=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_PCI=y +CONFIG_PCI_MSI=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y +CONFIG_TI_SCI_PROTOCOL=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -131,10 +131,15 @@ CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y +CONFIG_TI_CPTS=y CONFIG_TI_KEYSTONE_NETCP=y CONFIG_TI_KEYSTONE_NETCP_ETHSS=y -CONFIG_TI_CPTS=y CONFIG_MARVELL_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_DP83867_PHY=y +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_MISC=y +CONFIG_INPUT_GPIO_DECODER=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y @@ -144,6 +149,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y CONFIG_SPI=y +CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y CONFIG_PTP_1588_CLOCK=y @@ -152,9 +158,10 @@ CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_SYSCON=y -CONFIG_POWER_SUPPLY=y +CONFIG_GPIO_PCA953X=m CONFIG_POWER_RESET=y CONFIG_POWER_RESET_KEYSTONE=y +CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_DAVINCI_WATCHDOG=y @@ -166,8 +173,8 @@ CONFIG_USB_MON=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y -CONFIG_NOP_USB_XCEIV=y CONFIG_KEYSTONE_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -180,6 +187,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_ACTIVITY=y CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y @@ -196,7 +205,6 @@ CONFIG_PWM_TIECAP=m CONFIG_KEYSTONE_IRQ=y CONFIG_RESET_TI_SCI=m CONFIG_RESET_TI_SYSCON=m -CONFIG_TI_SCI_PROTOCOL=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_FANOTIFY=y @@ -216,10 +224,7 @@ CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_SHIRQ=y -CONFIG_DEBUG_USER=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_CRYPTO_USER=y CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_CBC=y @@ -229,12 +234,7 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y -CONFIG_SPI_CADENCE_QUADSPI=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_GPIO_DECODER=m -CONFIG_GPIO_PCA953X=m -CONFIG_LEDS_TRIGGER_ACTIVITY=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_MICREL_PHY=y -CONFIG_DP83867_PHY=y +CONFIG_DMA_CMA=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig index 2dfa33d..0c2f19d 100644 --- a/arch/arm/configs/lart_defconfig +++ b/arch/arm/configs/lart_defconfig @@ -1,32 +1,22 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_LART=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram" CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y CONFIG_PM=y +CONFIG_MODULES=y CONFIG_NET=y CONFIG_PACKET=m CONFIG_UNIX=y CONFIG_INET=y CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_DEBUG=y -CONFIG_SA1100_FIR=m CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=1 @@ -37,15 +27,19 @@ CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_NET_ETHERNET=y CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_ASYNC=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SERIAL_SA1100=y CONFIG_SERIAL_SA1100_CONSOLE=y # CONFIG_VGA_CONSOLE is not set CONFIG_SOUND=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=m CONFIG_REISERFS_FS=m diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 688c9849..142c170 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -15,8 +15,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_EMBEDDED=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set # CONFIG_MMU is not set CONFIG_ARCH_LPC18XX=y CONFIG_SET_MEM_PARAM=y @@ -24,13 +22,11 @@ CONFIG_DRAM_BASE=0x28000000 CONFIG_DRAM_SIZE=0x02000000 CONFIG_FLASH_MEM_BASE=0x1b000000 CONFIG_FLASH_SIZE=0x00080000 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_COREDUMP is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -60,6 +56,7 @@ CONFIG_SRAM=y CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_ARC is not set @@ -92,11 +89,11 @@ CONFIG_KEYBOARD_GPIO_POLLED=y # CONFIG_VT is not set # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_NONSTANDARD=y # CONFIG_HW_RANDOM is not set CONFIG_I2C_LPC2K=y CONFIG_SPI=y @@ -153,11 +150,12 @@ CONFIG_JFFS2_FS=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +# CONFIG_SLUB_DEBUG is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 6c3e4a1..8a41fe4 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -10,12 +10,9 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y -CONFIG_SLAB=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_LPC32XX=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0" @@ -24,9 +21,9 @@ CONFIG_VFP=y CONFIG_JUMP_LABEL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -60,6 +57,7 @@ CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set @@ -93,11 +91,11 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_PNX=y -CONFIG_GPIO_LPC32XX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_LPC32XX=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y CONFIG_SENSORS_DS620=y @@ -187,10 +185,10 @@ CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_GDB_SCRIPTS=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_TIMEOUT=5 # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index 5c0a671..b0c21a9 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -1,15 +1,13 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_LOGICPD_PXA270=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y @@ -53,8 +51,8 @@ CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig index cf49dc1..4fc744c 100644 --- a/arch/arm/configs/lubbock_defconfig +++ b/arch/arm/configs/lubbock_defconfig @@ -1,24 +1,20 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_MODULES=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_LUBBOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_PCMCIA_PXA2XX=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set +CONFIG_PCCARD=y +CONFIG_PCMCIA_PXA2XX=y CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y @@ -29,9 +25,9 @@ CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_PCNET=y +CONFIG_SMC91X=y CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_SA1111=y @@ -40,14 +36,18 @@ CONFIG_SERIAL_PXA_CONSOLE=y # CONFIG_VGA_CONSOLE is not set CONFIG_USB_GADGET=y CONFIG_USB_G_SERIAL=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 13da808..9cbb63c 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1,29 +1,28 @@ CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_UID16 is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_H4700=y CONFIG_MACH_MAGICIAN=y -CONFIG_NO_HZ=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="keepinitrd" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_FPE_NWFPE=y CONFIG_PM=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -35,15 +34,6 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y -CONFIG_IRTTY_SIR=m -CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -60,11 +50,11 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_NETDEVICES=y CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m # CONFIG_INPUT_MOUSEDEV is not set +CONFIG_PPP_ASYNC=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -73,19 +63,19 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m # CONFIG_SERIO is not set -CONFIG_SERIAL_PXA=y # CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_PXA=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_PXA=y CONFIG_W1_MASTER_DS1WM=y +CONFIG_HTC_EGPIO=y CONFIG_POWER_SUPPLY=y CONFIG_PDA_POWER=y CONFIG_BATTERY_DS2760=y # CONFIG_HWMON is not set CONFIG_MFD_ASIC3=y -CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y CONFIG_REGULATOR=y CONFIG_REGULATOR_GPIO=y @@ -99,8 +89,6 @@ CONFIG_BACKLIGHT_PWM=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y CONFIG_SOUND=y CONFIG_SND=m CONFIG_SND_MIXER_OSS=m @@ -112,6 +100,7 @@ CONFIG_SND_PXA2XX_SOC=m CONFIG_USB=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=y +CONFIG_USB_GPIO_VBUS=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_USB_PXA27X=y @@ -121,7 +110,6 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_GPIO_VBUS=y CONFIG_MMC=y CONFIG_SDIO_UART=m CONFIG_MMC_PXA=y @@ -148,6 +136,11 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set @@ -155,7 +148,4 @@ CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_CRYPTO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig index 03b4c61..096cd7b 100644 --- a/arch/arm/configs/mainstone_defconfig +++ b/arch/arm/configs/mainstone_defconfig @@ -1,16 +1,12 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_MODULES=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_MAINSTONE=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y @@ -38,14 +34,18 @@ CONFIG_FB_PXA=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig index 7c07f98..37739b6 100644 --- a/arch/arm/configs/milbeaut_m10v_defconfig +++ b/arch/arm/configs/milbeaut_m10v_defconfig @@ -45,7 +45,6 @@ CONFIG_VFP=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y CONFIG_EFI_VARS=m -CONFIG_EFI_CAPSULE_LOADER=m CONFIG_ARM_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM_NEON=m CONFIG_CRYPTO_SHA1_ARM_CE=m @@ -64,8 +63,7 @@ CONFIG_CMDLINE_PARTITION=y CONFIG_CMA=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_EFI_CAPSULE_LOADER=m CONFIG_OF_OVERLAY=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -115,5 +113,7 @@ CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=m CONFIG_CRC_ITU_T=m +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 3ef48e7..86e00f6 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C24XX=y @@ -12,6 +11,7 @@ CONFIG_S3C_ADC=y CONFIG_CPU_S3C2440=y CONFIG_MACH_MINI2440=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_KEXEC=y CONFIG_CPU_IDLE=y CONFIG_APM_EMULATION=y @@ -19,7 +19,6 @@ CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y @@ -28,6 +27,7 @@ CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y CONFIG_BINFMT_MISC=m +# CONFIG_COMPAT_BRK is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -104,6 +104,7 @@ CONFIG_SCSI=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_SG=m +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_TUN=m @@ -328,10 +329,10 @@ CONFIG_LIBCRC32C=m CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_MINI_4x6=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_DEBUG_KERNEL=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index a5e8d22..4d39c61 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -1,22 +1,18 @@ CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MMP=y -CONFIG_MACH_BROWNSTONE=y -CONFIG_MACH_FLINT=y -CONFIG_MACH_MARVELL_JASPER=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_MACH_MMP2_DT=y CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk" CONFIG_VFP=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -28,9 +24,9 @@ CONFIG_IP_PNP=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_RAW_NAND=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_GENERIC=y +CONFIG_MTD_RAW_NAND=y # CONFIG_BLK_DEV is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y @@ -39,9 +35,9 @@ CONFIG_SMC91X=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_PXA=y @@ -55,17 +51,18 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_MAX8925=y # CONFIG_VGA_CONSOLE is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8925=y -CONFIG_MMC=y -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_RESET_CONTROLLER is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y +# CONFIG_DNOTIFY is not set CONFIG_MSDOS_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y @@ -73,16 +70,16 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_MMP_UART3=y CONFIG_EARLY_PRINTK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig index eacc089..082a38a 100644 --- a/arch/arm/configs/moxart_defconfig +++ b/arch/arm/configs/moxart_defconfig @@ -1,7 +1,7 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_ELF_CORE is not set @@ -11,18 +11,17 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_EMBEDDED=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MULTI_V4=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MOXART=y CONFIG_MACH_UC7112LX=y -CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_ATAGS is not set CONFIG_ARM_APPENDED_DTB=y +# CONFIG_SWAP is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -118,10 +117,15 @@ CONFIG_EXT3_FS=y CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=y CONFIG_JFFS2_FS=y +CONFIG_KEYS=y +CONFIG_CRC32_BIT=y +CONFIG_DMA_API_DEBUG=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_KGDB=y CONFIG_DEBUG_PAGEALLOC=y +# CONFIG_SLUB_DEBUG is not set CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_KMEMLEAK=y CONFIG_DEBUG_STACK_USAGE=y @@ -131,12 +135,8 @@ CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_PROVE_LOCKING=y -CONFIG_DMA_API_DEBUG=y -CONFIG_KGDB=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y CONFIG_DEBUG_UART_PHYS=0x98200000 CONFIG_DEBUG_UART_VIRT=0xf9820000 CONFIG_EARLY_PRINTK=y -CONFIG_KEYS=y -CONFIG_CRC32_BIT=y diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig index c1e98e3..7005684 100644 --- a/arch/arm/configs/mps2_defconfig +++ b/arch/arm/configs/mps2_defconfig @@ -1,5 +1,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT_VOLUNTARY=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EXPERT=y @@ -10,21 +11,17 @@ CONFIG_EXPERT=y # CONFIG_SIGNALFD is not set # CONFIG_EVENTFD is not set # CONFIG_AIO is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_BLOCK is not set # CONFIG_MMU is not set CONFIG_ARCH_MPS2=y CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x21000000 CONFIG_DRAM_SIZE=0x1000000 -CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_ATAGS is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_SUSPEND is not set +# CONFIG_BLOCK is not set CONFIG_BINFMT_FLAT=y # CONFIG_COREDUMP is not set -# CONFIG_SUSPEND is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -67,9 +64,9 @@ CONFIG_SMSC911X=y # CONFIG_SERIO is not set # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_MPS2_UART_CONSOLE=y CONFIG_SERIAL_MPS2_UART=y +CONFIG_SERIAL_NONSTANDARD=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set CONFIG_WATCHDOG=y @@ -97,9 +94,10 @@ CONFIG_NFS_V4_2=y CONFIG_ROOT_NFS=y CONFIG_NLS=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_FS=y +# CONFIG_SLUB_DEBUG is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_MEMTEST=y diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index e530107b..6c3e45b 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y -CONFIG_SLOB=y CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_AT91=y @@ -11,23 +10,22 @@ CONFIG_SOC_AT91RM9200=y CONFIG_ARCH_CLPS711X=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX1=y +CONFIG_ARCH_NSPIRE=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_INTEGRATOR_IMPD1=y CONFIG_INTEGRATOR_CM720T=y CONFIG_INTEGRATOR_CM920T=y CONFIG_INTEGRATOR_CM922T_XA10=y -CONFIG_ARCH_NSPIRE=y CONFIG_AEABI=y # CONFIG_ATAGS is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_ARM_CLPS711X_CPUIDLE=y CONFIG_JUMP_LABEL=y CONFIG_PARTITION_ADVANCED=y # CONFIG_COREDUMP is not set +CONFIG_SLOB=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index f8d3011..e0be0e0 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -12,17 +12,8 @@ CONFIG_MACH_ASPEED_G4=y CONFIG_ARCH_AT91=y CONFIG_SOC_AT91SAM9=y CONFIG_ARCH_DAVINCI=y -CONFIG_ARCH_DAVINCI_DM644x=y -CONFIG_ARCH_DAVINCI_DM355=y -CONFIG_ARCH_DAVINCI_DM646x=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y -CONFIG_ARCH_DAVINCI_DM365=y -CONFIG_MACH_SFFSDR=y -CONFIG_MACH_NEUROS_OSD2=y -CONFIG_MACH_DM355_LEOPARD=y -CONFIG_MACH_MITYOMAPL138=y -CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_ARCH_MXC=y CONFIG_SOC_IMX25=y CONFIG_SOC_IMX27=y @@ -31,8 +22,6 @@ CONFIG_MACH_KIRKWOOD=y CONFIG_ARCH_NPCM=y CONFIG_ARCH_WPCM450=y CONFIG_ARCH_ORION5X=y -CONFIG_MACH_DB88F5281=y -CONFIG_MACH_RD88F5182=y CONFIG_MACH_RD88F5182_DT=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y @@ -40,19 +29,14 @@ CONFIG_MACH_TS209=y CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y -CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y -CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_D2NET_DT=y CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2_DT=y -CONFIG_MACH_WNR854T=y -CONFIG_MACH_RD88F5181L_GE=y -CONFIG_MACH_RD88F5181L_FXO=y -CONFIG_MACH_RD88F6183AP_GE=y CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_VERSATILE=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ARM_APPENDED_DTB=y @@ -78,7 +62,6 @@ CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_PCI_MVEBU=y -CONFIG_ARCH_VERSATILE=y CONFIG_PCI_VERSATILE=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -98,17 +81,14 @@ CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_ORION=y CONFIG_MTD_SPI_NOR=y -CONFIG_SPI_ASPEED_SMC=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y +CONFIG_VIRTIO_BLK=y CONFIG_ATMEL_SSC=m CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_BLK=y CONFIG_CHR_DEV_SG=m CONFIG_ATA=y CONFIG_SATA_AHCI=y @@ -161,6 +141,7 @@ CONFIG_I2C_AT91=y CONFIG_I2C_IMX=y CONFIG_I2C_MV64XXX=y CONFIG_SPI=y +CONFIG_SPI_ASPEED_SMC=y CONFIG_SPI_ATMEL=y CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y @@ -273,6 +254,8 @@ CONFIG_RTC_DRV_ASPEED=m CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_MV_XOR=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_MMIO=y CONFIG_STAGING=y CONFIG_ASPEED_LPC_CTRL=m CONFIG_ASPEED_LPC_SNOOP=m @@ -307,10 +290,10 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index ce9826b..bcd7a43 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -6,6 +6,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_ARCH_VIRT=y +CONFIG_ARCH_AIROHA=y CONFIG_ARCH_ACTIONS=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_ARTPEC=y @@ -28,15 +29,16 @@ CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_23550=y CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BCM_53573=y -CONFIG_ARCH_BCM_63XX=y CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BCMBCA=y +CONFIG_ARCH_BCMBCA_CORTEXA7=y +CONFIG_ARCH_BCMBCA_CORTEXA9=y +CONFIG_ARCH_BCMBCA_BRAHMAB15=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_DIGICOLOR=y -CONFIG_ARCH_AIROHA=y CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y @@ -94,6 +96,7 @@ CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y CONFIG_ARCH_STM32=y +CONFIG_ARCH_SUNPLUS=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_UNIPHIER=y @@ -129,12 +132,6 @@ CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_ARM_QCOM_SPM_CPUIDLE=y CONFIG_KERNEL_MODE_NEON=y -CONFIG_ARM_SCMI_PROTOCOL=y -CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_TRUSTED_FOUNDATIONS=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_EFI_CAPSULE_LOADER=m CONFIG_ARM_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM_NEON=m CONFIG_CRYPTO_SHA1_ARM_CE=m @@ -207,6 +204,12 @@ CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y +CONFIG_ARM_SCMI_PROTOCOL=y +CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_TRUSTED_FOUNDATIONS=y +CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_SPROM=y +CONFIG_EFI_CAPSULE_LOADER=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -227,7 +230,6 @@ CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_NAND_STM32_FMC2=y CONFIG_MTD_NAND_PL35X=y CONFIG_MTD_SPI_NOR=y -CONFIG_SPI_ASPEED_SMC=m CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -259,13 +261,13 @@ CONFIG_SATA_MV=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_NET_VENDOR_ASIX=y -CONFIG_SPI_AX88796C=m CONFIG_VIRTIO_NET=y CONFIG_B53_SPI_DRIVER=m CONFIG_B53_MDIO_DRIVER=m CONFIG_B53_MMAP_DRIVER=m CONFIG_NET_DSA_BCM_SF2=m CONFIG_SUN4I_EMAC=y +CONFIG_SPI_AX88796C=m CONFIG_BCMGENET=m CONFIG_BGMAC_BCMA=y CONFIG_SYSTEMPORT=m @@ -298,7 +300,6 @@ CONFIG_MARVELL_PHY=y CONFIG_AT803X_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_DP83867_PHY=y -CONFIG_USB_BRCMSTB=m CONFIG_MDIO_MSCC_MIIM=m CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8152=m @@ -435,6 +436,7 @@ CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_I2C_SLAVE_EEPROM=y CONFIG_SPI=y +CONFIG_SPI_ASPEED_SMC=m CONFIG_SPI_ATMEL=m CONFIG_SPI_ATMEL_QUADSPI=m CONFIG_SPI_BCM2835=y @@ -465,10 +467,10 @@ CONFIG_SPI_SPIDEV=y CONFIG_SPMI=y CONFIG_PTP_1588_CLOCK=y CONFIG_PINCTRL_AS3722=y -CONFIG_PINCTRL_STMFX=y CONFIG_PINCTRL_MICROCHIP_SGPIO=y CONFIG_PINCTRL_OCELOT=y CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_STMFX=y CONFIG_PINCTRL_OWL=y CONFIG_PINCTRL_S500=y CONFIG_PINCTRL_MSM=y @@ -511,7 +513,6 @@ CONFIG_BATTERY_ACT8945A=y CONFIG_BATTERY_CPCAP=m CONFIG_BATTERY_SBS=y CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_ACER_A500=m CONFIG_AXP20X_POWER=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m @@ -523,6 +524,7 @@ CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_SMB347=m CONFIG_CHARGER_TPS65090=y +CONFIG_BATTERY_ACER_A500=m CONFIG_SENSORS_ARM_SCMI=y CONFIG_SENSORS_ASPEED=m CONFIG_SENSORS_IIO_HWMON=y @@ -577,7 +579,6 @@ CONFIG_GXP_WATCHDOG=y CONFIG_BCMA_HOST_SOC=y CONFIG_BCMA_DRIVER_GMAC_CMN=y CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_MFD_ACER_A500_EC=m CONFIG_MFD_ACT8945A=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y @@ -610,6 +611,7 @@ CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_STM32_LPTIMER=m CONFIG_MFD_STPMIC1=y +CONFIG_MFD_ACER_A500_EC=m CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_ANATOP=y @@ -664,31 +666,31 @@ CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_MMP_CAMERA=m +CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_ASPEED=m -CONFIG_VIDEO_STM32_DCMI=m +CONFIG_VIDEO_ATMEL_ISC=m +CONFIG_VIDEO_ATMEL_XISC=m +CONFIG_VIDEO_ATMEL_ISI=m +CONFIG_VIDEO_MICROCHIP_CSI2DC=m +CONFIG_VIDEO_MMP_CAMERA=m +CONFIG_VIDEO_TEGRA_VDE=m CONFIG_VIDEO_RENESAS_CEU=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_VIDEO_RENESAS_FDP1=m +CONFIG_VIDEO_RENESAS_JPU=m +CONFIG_VIDEO_RENESAS_VSP1=m +CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m CONFIG_VIDEO_S5P_FIMC=m CONFIG_VIDEO_S5P_MIPI_CSIS=m CONFIG_VIDEO_EXYNOS_FIMC_LITE=m CONFIG_VIDEO_EXYNOS4_FIMC_IS=m -CONFIG_VIDEO_RCAR_VIN=m -CONFIG_VIDEO_ATMEL_ISC=m -CONFIG_VIDEO_ATMEL_XISC=m -CONFIG_VIDEO_ATMEL_ISI=m -CONFIG_VIDEO_MICROCHIP_CSI2DC=m -CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m -CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_STI_BDISP=m -CONFIG_VIDEO_STI_HVA=m CONFIG_VIDEO_STI_DELTA=m -CONFIG_VIDEO_RENESAS_FDP1=m -CONFIG_VIDEO_RENESAS_JPU=m -CONFIG_VIDEO_RENESAS_VSP1=m -CONFIG_VIDEO_TEGRA_VDE=m +CONFIG_VIDEO_STI_HVA=m +CONFIG_VIDEO_STM32_DCMI=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m CONFIG_VIDEO_ADV7180=m @@ -725,13 +727,13 @@ CONFIG_DRM_PANEL_LVDS=m CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m -CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m CONFIG_DRM_PANEL_RAYDIUM_RM68200=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m -CONFIG_DRM_LVDS_CODEC=m +CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m CONFIG_DRM_DISPLAY_CONNECTOR=m +CONFIG_DRM_LVDS_CODEC=m CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_SII902X=m @@ -747,6 +749,7 @@ CONFIG_DRM_IMX_PARALLEL_DISPLAY=m CONFIG_DRM_IMX_TVE=m CONFIG_DRM_IMX_LDB=m CONFIG_DRM_IMX_HDMI=m +CONFIG_DRM_V3D=m CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m @@ -832,6 +835,7 @@ CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_XHCI_TEGRA=m +CONFIG_USB_BRCMSTB=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_STI=y CONFIG_USB_EHCI_EXYNOS=m @@ -936,10 +940,10 @@ CONFIG_LEDS_CLASS_FLASH=m CONFIG_LEDS_CPCAP=m CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y -CONFIG_LEDS_MAX77693=m CONFIG_LEDS_MAX8997=m CONFIG_LEDS_ACER_A500=m CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_MAX77693=m CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -1162,10 +1166,10 @@ CONFIG_KEYSTONE_IRQ=y CONFIG_RESET_MCHP_SPARX5=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y +CONFIG_PHY_BRCM_USB=m CONFIG_PHY_HIX5HD2_SATA=y CONFIG_PHY_BERLIN_SATA=y CONFIG_PHY_BERLIN_USB=y -CONFIG_PHY_BRCM_USB=m CONFIG_PHY_MMP3_USB=m CONFIG_PHY_LAN966X_SERDES=m CONFIG_PHY_CPCAP_USB=m diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index cd703c1..a53ccd4 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,14 +1,12 @@ CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y -# CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V6 is not set # CONFIG_ARCH_MULTI_V7 is not set @@ -16,15 +14,16 @@ CONFIG_ARCH_MV78XX0=y CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y CONFIG_MACH_TERASTATION_WXL=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_FPE_NWFPE=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_VFP=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -52,25 +51,26 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_NET_PCI=y CONFIG_MV643XX_ETH=y # CONFIG_INPUT_MOUSEDEV is not set +CONFIG_MARVELL_PHY=y CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -110,21 +110,20 @@ CONFIG_CRAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y +# CONFIG_SLUB_DEBUG is not set CONFIG_SCHEDSTATS=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index d57ff30..ef3a33e 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -2,18 +2,13 @@ CONFIG_SYSVIPC=y CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=19 CONFIG_PROFILING=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y CONFIG_ARCH_ORION5X=y -CONFIG_MACH_DB88F5281=y -CONFIG_MACH_RD88F5182=y CONFIG_MACH_RD88F5182_DT=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y @@ -22,24 +17,14 @@ CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_LSCHL=y CONFIG_MACH_LINKSTATION_MINI=y -CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y -CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_D2NET_DT=y CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2_DT=y -CONFIG_MACH_WNR854T=y -CONFIG_MACH_RD88F5181L_GE=y -CONFIG_MACH_RD88F5181L_FXO=y -CONFIG_MACH_RD88F6183AP_GE=y -CONFIG_PCI_MVEBU=y -CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y @@ -47,6 +32,9 @@ CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_ARM_KIRKWOOD_CPUIDLE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -61,6 +49,7 @@ CONFIG_NET_SWITCHDEV=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y +CONFIG_PCI_MVEBU=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y @@ -84,6 +73,7 @@ CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y @@ -93,9 +83,9 @@ CONFIG_NET_DSA_MV88E6XXX=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y -CONFIG_MWL8K=m CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y +CONFIG_MWL8K=m CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set @@ -194,16 +184,16 @@ CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_DEV_MARVELL_CESA=y +CONFIG_CRC_CCITT=y +CONFIG_LIBCRC32C=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index 7b713c0..68a1826 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -4,7 +4,6 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -24,6 +23,7 @@ CONFIG_VFP=y CONFIG_NEON=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_SLAB=y # CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y @@ -147,7 +147,7 @@ CONFIG_NLS_UTF8=y CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_PRINTK_TIME=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ca32446..155553e 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -15,7 +15,6 @@ CONFIG_CGROUPS=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y -# CONFIG_COMPAT_BRK is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXS=y CONFIG_AEABI=y @@ -25,6 +24,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_COMPAT_BRK is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -93,6 +93,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_DRM=y CONFIG_DRM_PANEL_SEIKO_43WVF1G=y CONFIG_DRM_MXSFB=y +CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y @@ -162,10 +163,10 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC7=m CONFIG_FONTS=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_DEBUG_KERNEL=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_PROVE_LOCKING=y CONFIG_BLK_DEV_IO_TRACE=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 018a109..9074035 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -1,16 +1,9 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_ASSABET=y CONFIG_ASSABET_NEPONSET=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_PCMCIA_SA1111=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x80000 CONFIG_ZBOOT_ROM_BSS=0xc1000000 CONFIG_ZBOOT_ROM=y @@ -18,14 +11,21 @@ CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtd CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y CONFIG_PM=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +# CONFIG_MSDOS_PARTITION is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set +CONFIG_PCCARD=y +CONFIG_PCMCIA_SA1100=y +CONFIG_PCMCIA_SA1111=y CONFIG_MTD=y -CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y @@ -39,20 +39,20 @@ CONFIG_BLK_DEV_SD=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_SMC=y +CONFIG_PCMCIA_PCNET=y CONFIG_SMC9194=y CONFIG_SMC91X=y CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_PCNET=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_SA1111=y -CONFIG_SERIAL_NONSTANDARD=y +CONFIG_LEGACY_PTY_COUNT=64 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CS=y CONFIG_SERIAL_SA1100=y CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=64 +CONFIG_SERIAL_NONSTANDARD=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_WATCHDOG=y @@ -68,17 +68,19 @@ CONFIG_USB=m CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_ISO8859_1=m -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig index c3c171c..cf7bbcf 100644 --- a/arch/arm/configs/netwinder_defconfig +++ b/arch/arm/configs/netwinder_defconfig @@ -2,14 +2,11 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_ARCH_FOOTBRIDGE=y CONFIG_ARCH_NETWINDER=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_DEPRECATED_PARAM_STRUCT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=0x801" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -51,9 +48,6 @@ CONFIG_977_WATCHDOG=y CONFIG_FB=y CONFIG_FB_CYBER2000=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SOUND_PRIME=y @@ -62,6 +56,10 @@ CONFIG_SOUND_TRACEINIT=y CONFIG_SOUND_DMAP=y CONFIG_SOUND_YM3812=y CONFIG_SOUND_WAVEARTIST=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y @@ -72,7 +70,6 @@ CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_SMB_FS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y @@ -80,6 +77,9 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 907d651..d5881de 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -1,5 +1,4 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y @@ -10,14 +9,14 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y -CONFIG_SLAB=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_NOMADIK=y CONFIG_MACH_NOMADIK_8815NHK=y CONFIG_AEABI=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +# CONFIG_SWAP is not set +CONFIG_SLAB=y CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y @@ -59,6 +58,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y @@ -135,7 +135,7 @@ CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_DES=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 14c17a2..54a9f50 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -1,64 +1,49 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set # CONFIG_ELF_CORE is not set # CONFIG_BASE_FULL is not set # CONFIG_SHMEM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLOB=y +# CONFIG_KALLSYMS is not set CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MUX is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_DM_TIMER=y CONFIG_ARCH_OMAP730=y CONFIG_ARCH_OMAP850=y CONFIG_ARCH_OMAP16XX=y -CONFIG_MACH_OMAP_INNOVATOR=y -CONFIG_MACH_OMAP_H2=y -CONFIG_MACH_OMAP_H3=y -CONFIG_MACH_HERALD=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_RESET_CLOCKS=y CONFIG_MACH_OMAP_OSK=y -CONFIG_MACH_OMAP_PERSEUS2=y -CONFIG_MACH_OMAP_FSAMPLE=y -CONFIG_MACH_VOICEBLUE=y CONFIG_MACH_OMAP_PALMTE=y -CONFIG_MACH_OMAP_PALMZ71=y -CONFIG_MACH_OMAP_PALMTT=y CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_OMAP_CF=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2" CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y # CONFIG_SUSPEND is not set +CONFIG_PM=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BINFMT_MISC=y +# CONFIG_SWAP is not set +CONFIG_SLOB=y +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -79,6 +64,8 @@ CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=y CONFIG_BT_HIDP=y +CONFIG_PCCARD=y +CONFIG_OMAP_CF=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_CONNECTOR=y @@ -99,12 +86,21 @@ CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=m CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_TUN=y CONFIG_PHYLIB=y CONFIG_SMC91X=y +CONFIG_PPP=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_ASYNC=y +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y CONFIG_USB_PEGASUS=y @@ -112,14 +108,6 @@ CONFIG_USB_RTL8150=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -CONFIG_SLIP=y -CONFIG_SLIP_COMPRESSED=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=y @@ -130,11 +118,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=y # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=3 CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -156,11 +144,6 @@ CONFIG_FB_OMAP_LCD_MIPID=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_FONT_6x11=y -CONFIG_FONT_MINI_4x6=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -222,7 +205,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y @@ -235,13 +217,8 @@ CONFIG_NLS_ISO8859_15=y CONFIG_NLS_KOI8_R=y CONFIG_NLS_UTF8=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y @@ -249,3 +226,13 @@ CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_LIBCRC32C=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_FONT_6x11=y +CONFIG_FONT_MINI_4x6=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9380df6..99d015c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -22,11 +22,8 @@ CONFIG_CGROUP_PERF=y CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -CONFIG_SLAB=y CONFIG_PROFILING=y CONFIG_ARCH_MULTI_V6=y -CONFIG_POWER_AVS_OMAP=y -CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_ARCH_OMAP2=y CONFIG_ARCH_OMAP3=y @@ -35,6 +32,8 @@ CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y CONFIG_SMP=y @@ -69,9 +68,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y +CONFIG_SLAB=y CONFIG_CMA=y CONFIG_ZSMALLOC=m CONFIG_NET=y @@ -316,6 +315,7 @@ CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=m CONFIG_EEPROM_AT25=m CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y @@ -494,15 +494,15 @@ CONFIG_REGULATOR_TWL4030=y CONFIG_RC_CORE=m CONFIG_LIRC=y CONFIG_RC_DEVICES=y -CONFIG_IR_SPI=m -CONFIG_IR_RX51=m CONFIG_IR_GPIO_TX=m CONFIG_IR_PWM_TX=m +CONFIG_IR_RX51=m +CONFIG_IR_SPI=m CONFIG_MEDIA_SUPPORT=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_OMAP3=m -CONFIG_VIDEO_TVP5150=m CONFIG_VIDEO_MT9P031=m +CONFIG_VIDEO_TVP5150=m CONFIG_DRM=m CONFIG_DRM_OMAP=m CONFIG_OMAP5_DSS_HDMI=y @@ -726,9 +726,8 @@ CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_PRINTK_TIME=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_SPLIT=y CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_DEBUG_INFO_SPLIT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_SCHEDSTATS=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index b9e3b64..1311d95 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,23 +1,14 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y -# CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V6 is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ORION5X=y -CONFIG_ARCH_ORION5X_DT=y -CONFIG_MACH_DB88F5281=y -CONFIG_MACH_RD88F5182=y CONFIG_MACH_RD88F5182_DT=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y @@ -25,28 +16,20 @@ CONFIG_MACH_TS209=y CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y -CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y -CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y -CONFIG_MACH_EDMINI_V2_DT=y -CONFIG_MACH_D2NET=y -CONFIG_MACH_BIGDISK=y CONFIG_MACH_NET2BIG=y -CONFIG_MACH_MSS2=y -CONFIG_MACH_WNR854T=y -CONFIG_MACH_RD88F5181L_GE=y -CONFIG_MACH_RD88F5181L_FXO=y -CONFIG_MACH_RD88F6183AP_GE=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_FPE_NWFPE=y CONFIG_VFP=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -58,6 +41,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y CONFIG_NET_PKTGEN=m +# CONFIG_VGA_ARB is not set CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -69,13 +53,14 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV_LOOP=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y @@ -103,7 +88,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM75=y -# CONFIG_VGA_ARB is not set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y @@ -148,17 +132,18 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_DEV_MARVELL_CESA=y +CONFIG_CRC_T10DIF=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +# CONFIG_SLUB_DEBUG is not set CONFIG_LATENCYTOP=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig index de37f7e..600f78b 100644 --- a/arch/arm/configs/oxnas_v6_defconfig +++ b/arch/arm/configs/oxnas_v6_defconfig @@ -7,16 +7,11 @@ CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_STRICT_MODULE_RWX=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_CMDLINE_PARTITION=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OXNAS=y CONFIG_MACH_OX820=y CONFIG_SMP=y CONFIG_NR_CPUS=16 -CONFIG_CMA=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_SECCOMP=y CONFIG_ARM_APPENDED_DTB=y @@ -26,6 +21,11 @@ CONFIG_EFI=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_VFP=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMDLINE_PARTITION=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -44,8 +44,6 @@ CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=64 CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -88,5 +86,7 @@ CONFIG_PSTORE_RAM=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index e6acb1d..a9a808b 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -1,24 +1,23 @@ # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_PALM=y # CONFIG_MACH_PALMTX is not set -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0" CONFIG_FPE_NWFPE=y CONFIG_PM=y CONFIG_APM_EMULATION=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -52,8 +51,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_DEBUG=y @@ -72,5 +69,7 @@ CONFIG_TMPFS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_866=y CONFIG_NLS_UTF8=y -CONFIG_DEBUG_USER=y CONFIG_CRC_T10DIF=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 106d5be..06bc9a8 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -1,6 +1,8 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -8,22 +10,19 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_PCM027=y CONFIG_MACH_PCM990_BASEBOARD=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +# CONFIG_SWAP is not set +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -43,6 +42,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_BLK_DEV is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y @@ -51,9 +51,9 @@ CONFIG_SMC91X=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -84,7 +84,6 @@ CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_DEFAULT="iso8859-15" CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_15=y diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig index 2170148..d872633 100644 --- a/arch/arm/configs/pleb_defconfig +++ b/arch/arm/configs/pleb_defconfig @@ -1,19 +1,18 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set # CONFIG_SHMEM is not set -CONFIG_MODULES=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_PLEB=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M" CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +# CONFIG_SWAP is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -21,9 +20,9 @@ CONFIG_INET=y CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index 0947f02..70d3278 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -1,12 +1,6 @@ CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MMP=y CONFIG_MACH_ASPENITE=y CONFIG_MACH_ZYLONITE2=y CONFIG_MACH_AVENGERS_LITE=y @@ -14,10 +8,14 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_ARCH_MMP=y CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -34,9 +32,9 @@ CONFIG_SMC91X=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set @@ -49,12 +47,12 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig index 5663245..ae04449 100644 --- a/arch/arm/configs/pxa255-idp_defconfig +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -1,16 +1,12 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_MODULES=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_PXA_IDP=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y @@ -38,18 +34,22 @@ CONFIG_FB=y CONFIG_FB_PXA=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_LOGO=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 228d427..d1e83b5 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -1,22 +1,18 @@ CONFIG_SYSVIPC=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_SLAB=y -CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y -CONFIG_MACH_LITTLETON=y -CONFIG_MACH_TAVOREVB=y -CONFIG_MACH_SAAR=y -CONFIG_PREEMPT=y +CONFIG_MACH_PXA3XX_DT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -31,11 +27,11 @@ CONFIG_IP_PNP=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_NAND_MARVELL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_NETDEVICES=y @@ -45,12 +41,10 @@ CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_PXA27x=y -CONFIG_KEYBOARD_PXA930_ROTARY=y -CONFIG_MOUSE_PXA930_TRKBALL=y CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_HELPER_AUTO is not set @@ -61,7 +55,6 @@ CONFIG_GPIO_MAX732X=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_MAX7301=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=y CONFIG_BATTERY_DA9030=y @@ -79,8 +72,6 @@ CONFIG_BACKLIGHT_DA903X=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FONTS=y -CONFIG_FONT_6x11=y CONFIG_LOGO=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y @@ -106,9 +97,11 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS=y +CONFIG_FONTS=y +CONFIG_FONT_6x11=y CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index b211963..5072bde 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -1,23 +1,21 @@ CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y +CONFIG_ARCH_MMP=y +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk" CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MMP=y CONFIG_MACH_TAVOREVB=y CONFIG_MACH_TTC_DKB=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk" CONFIG_FPE_NWFPE=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -34,9 +32,12 @@ CONFIG_SMC91X=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y +# CONFIG_HW_RANDOM is not set CONFIG_SPI=y +# CONFIG_HWMON is not set CONFIG_FB=y CONFIG_MMP_DISP=y CONFIG_MMP_DISP_CONTROLLER=y @@ -44,9 +45,6 @@ CONFIG_MMP_SPI=y CONFIG_MMP_PANEL_TPOHVGA=y CONFIG_MMP_FB=y CONFIG_LOGO=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set # CONFIG_VGA_CONSOLE is not set # CONFIG_USB_SUPPORT is not set CONFIG_TMPFS=y @@ -57,14 +55,14 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +CONFIG_CRC_CCITT=y CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_MMP_UART2=y CONFIG_EARLY_PRINTK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 1db70df..104a457 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y @@ -11,81 +12,16 @@ CONFIG_LOG_BUF_SHIFT=13 CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y -CONFIG_SLOB=y CONFIG_PROFILING=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_LDM_PARTITION=y -CONFIG_CMDLINE_PARTITION=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y -CONFIG_ARCH_LUBBOCK=y -CONFIG_MACH_MAINSTONE=y -CONFIG_MACH_ZYLONITE300=y -CONFIG_MACH_ZYLONITE320=y -CONFIG_MACH_LITTLETON=y -CONFIG_MACH_TAVOREVB=y -CONFIG_MACH_SAAR=y -CONFIG_ARCH_PXA_IDP=y -CONFIG_ARCH_VIPER=y -CONFIG_MACH_ARCOM_ZEUS=y -CONFIG_MACH_BALLOON3=y -CONFIG_MACH_CSB726=y -CONFIG_CSB726_CSB701=y -CONFIG_MACH_EXEDA=y -CONFIG_MACH_CM_X300=y -CONFIG_MACH_CAPC7117=y CONFIG_ARCH_GUMSTIX=y -CONFIG_MACH_XCEP=y -CONFIG_TRIZEPS_PXA=y -CONFIG_MACH_TRIZEPS4WL=y -CONFIG_MACH_LOGICPD_PXA270=y -CONFIG_MACH_PCM027=y -CONFIG_MACH_PCM990_BASEBOARD=y -CONFIG_MACH_COLIBRI=y -CONFIG_MACH_COLIBRI_PXA270_INCOME=y -CONFIG_MACH_COLIBRI300=y -CONFIG_MACH_COLIBRI320=y -CONFIG_MACH_COLIBRI_EVALBOARD=y -CONFIG_MACH_VPAC270=y -CONFIG_MACH_H4700=y -CONFIG_MACH_H5000=y -CONFIG_MACH_HIMALAYA=y -CONFIG_MACH_MAGICIAN=y -CONFIG_MACH_MIOA701=y -CONFIG_PXA_EZX=y -CONFIG_MACH_MP900C=y -CONFIG_ARCH_PXA_PALM=y CONFIG_PXA_SHARPSL=y -CONFIG_MACH_POODLE=y -CONFIG_MACH_CORGI=y -CONFIG_MACH_SHEPHERD=y -CONFIG_MACH_HUSKY=y CONFIG_MACH_AKITA=y CONFIG_MACH_BORZOI=y -CONFIG_MACH_TOSA=y -CONFIG_TOSA_BT=m -CONFIG_TOSA_USE_EXT_KEYCODES=y -CONFIG_MACH_ICONTROL=y -CONFIG_ARCH_PXA_ESERIES=y -CONFIG_MACH_ZIPIT2=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCCARD=m -CONFIG_YENTA=m -CONFIG_PCMCIA_PXA2XX=m -CONFIG_PREEMPT=y +CONFIG_PXA_SYSTEMS_CPLDS=y CONFIG_AEABI=y -# CONFIG_COMPACTION is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_CMDLINE="root=/dev/ram0 ro" CONFIG_KEXEC=y CONFIG_CPU_FREQ=y @@ -98,7 +34,24 @@ CONFIG_CPUFREQ_DT=m CONFIG_ARM_PXA2xx_CPUFREQ=m CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_LDM_PARTITION=y +CONFIG_CMDLINE_PARTITION=y CONFIG_BINFMT_MISC=y +CONFIG_SLOB=y +# CONFIG_COMPACTION is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -116,16 +69,6 @@ CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_IEEE802154=y CONFIG_DNS_RESOLVER=y -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y -CONFIG_IRTTY_SIR=m -CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -152,51 +95,60 @@ CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=m +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_PCCARD=m +CONFIG_YENTA=m +CONFIG_PCMCIA_PXA2XX=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_AR7_PARTS=m +CONFIG_MTD_CMDLINE_PARTS=m +CONFIG_MTD_OF_PARTS=m +CONFIG_MTD_AFS_PARTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AFS_PARTS=m -CONFIG_MTD_OF_PARTS=m -CONFIG_MTD_AR7_PARTS=m CONFIG_MTD_BLOCK=m CONFIG_NFTL=m CONFIG_NFTL_RW=y +CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_LE_BYTE_SWAP=y CONFIG_MTD_CFI_GEOMETRY=y CONFIG_MTD_OTP=y +CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_STAA=m CONFIG_MTD_RAM=m CONFIG_MTD_ROM=m CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PXA2XX=m CONFIG_MTD_M25P80=m CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_DOCG3=m +CONFIG_MTD_ONENAND=m +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_GENERIC=m CONFIG_MTD_RAW_NAND=m -CONFIG_MTD_NAND_ECC_SW_BCH=y +CONFIG_MTD_NAND_SHARPSL=m +CONFIG_MTD_NAND_TMIO=m +CONFIG_MTD_NAND_BRCMNAND=m CONFIG_MTD_NAND_GPIO=m +CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_NAND_DISKONCHIP=m CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y -CONFIG_MTD_NAND_SHARPSL=m -CONFIG_MTD_NAND_MARVELL=m CONFIG_MTD_NAND_CM_X270=m -CONFIG_MTD_NAND_TMIO=m -CONFIG_MTD_NAND_BRCMNAND=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m +CONFIG_MTD_NAND_ECC_SW_BCH=y CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=m CONFIG_MTD_UBI_BLOCK=y @@ -210,8 +162,6 @@ CONFIG_AD525X_DPOT_I2C=m CONFIG_ICS932S401=m CONFIG_APDS9802ALS=m CONFIG_ISL29003=m -CONFIG_IIO=m -CONFIG_AD5446=m CONFIG_EEPROM_AT24=m CONFIG_SENSORS_LIS3_SPI=m CONFIG_SCSI=y @@ -242,13 +192,13 @@ CONFIG_SMC91X=m CONFIG_SMSC911X=m CONFIG_STMMAC_ETH=m CONFIG_PHYLIB=y -CONFIG_AT803X_PHY=m -CONFIG_MARVELL_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=m CONFIG_MICREL_PHY=m CONFIG_FIXED_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_AT803X_PHY=m CONFIG_MDIO_BITBANG=y CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m @@ -272,16 +222,16 @@ CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_CS=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_SDIO=m CONFIG_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m CONFIG_RT2X00=m CONFIG_RT73USB=m CONFIG_RT2800USB=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_MATRIXKMAP=y CONFIG_INPUT_MOUSEDEV=m @@ -294,14 +244,12 @@ CONFIG_KEYBOARD_ATKBD=m CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=m CONFIG_KEYBOARD_PXA27x=m -CONFIG_KEYBOARD_PXA930_ROTARY=m CONFIG_KEYBOARD_CROS_EC=m CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_PXA930_TRKBALL=m CONFIG_MOUSE_NAVPOINT_PXA27x=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m @@ -312,12 +260,9 @@ CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_HTCPEN=m CONFIG_TOUCHSCREEN_PENMOUNT=m CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_PCAP=m CONFIG_TOUCHSCREEN_ST1232=m @@ -328,7 +273,6 @@ CONFIG_INPUT_GPIO_ROTARY_ENCODER=m CONFIG_INPUT_PCAP=m CONFIG_INPUT_ADXL34X=m CONFIG_SERIO=m -CONFIG_SERIO_SA1111=m CONFIG_LEGACY_PTY_COUNT=8 CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_CS=m @@ -341,6 +285,7 @@ CONFIG_I2C_CHARDEV=m CONFIG_I2C_MUX_PCA954x=m CONFIG_I2C_MUX_PINCTRL=m CONFIG_I2C_DESIGNWARE_PLATFORM=m +CONFIG_I2C_GPIO=y CONFIG_I2C_PXA_SLAVE=y CONFIG_I2C_XILINX=m CONFIG_I2C_CROS_EC_TUNNEL=m @@ -354,16 +299,17 @@ CONFIG_SPI_XILINX=m CONFIG_SPI_SPIDEV=m CONFIG_PPS=y CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DWAPB=m CONFIG_GPIO_GENERIC_PLATFORM=m CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m +CONFIG_HTC_EGPIO=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_MAX7301=m -CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=m CONFIG_BATTERY_SBS=m @@ -387,13 +333,8 @@ CONFIG_MFD_AS3711=y CONFIG_MFD_BCM590XX=m CONFIG_MFD_AXP20X=y CONFIG_MFD_CROS_EC_DEV=m -CONFIG_CHROME_PLATFORMS=y -CONFIG_CROS_EC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_SPI=m CONFIG_MFD_ASIC3=y CONFIG_PMIC_DA903X=y -CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=m CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77693=y @@ -441,11 +382,13 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_PXA27x=m CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_PXA27x=m CONFIG_DRM=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_PXA=y CONFIG_FB_PXA_OVERLAY=y CONFIG_FB_PXA_PARAMETERS=y CONFIG_PXA3XX_GCU=m @@ -462,31 +405,20 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y +CONFIG_SND_SEQUENCER=m CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_ATMEL_SOC=m CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_CORGI=m +CONFIG_SND_PXA_SOC_SSP=m CONFIG_SND_PXA2XX_SOC_SPITZ=m -CONFIG_SND_PXA2XX_SOC_Z2=m -CONFIG_SND_PXA2XX_SOC_POODLE=m -CONFIG_SND_PXA2XX_SOC_TOSA=m -CONFIG_SND_PXA2XX_SOC_E740=m -CONFIG_SND_PXA2XX_SOC_E750=m -CONFIG_SND_PXA2XX_SOC_E800=m -CONFIG_SND_PXA2XX_SOC_EM_X270=m -CONFIG_SND_PXA2XX_SOC_PALM27X=y -CONFIG_SND_SOC_ZYLONITE=m -CONFIG_SND_PXA2XX_SOC_HX4700=m -CONFIG_SND_PXA2XX_SOC_MAGICIAN=m -CONFIG_SND_PXA2XX_SOC_MIOA701=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_WM8731_I2C=m CONFIG_SND_SOC_WM8978=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SOUND_PRIME=m @@ -575,6 +507,7 @@ CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_GPIO_VBUS=m CONFIG_USB_ISP1301=m CONFIG_USB_GADGET=m CONFIG_USB_GADGET_VBUS_DRAW=500 @@ -621,9 +554,9 @@ CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_MAX8907=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_TPS6586X=m CONFIG_RTC_DRV_TPS65910=m CONFIG_RTC_DRV_S35390A=m @@ -638,10 +571,16 @@ CONFIG_PXA_DMA=y CONFIG_DW_DMAC=m CONFIG_UIO=y CONFIG_CROS_EC_CHARDEV=m +CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC=m +CONFIG_CROS_EC_I2C=m +CONFIG_CROS_EC_SPI=m CONFIG_COMMON_CLK_S2MPS11=m CONFIG_PM_DEVFREQ=y CONFIG_EXTCON=y CONFIG_MEMORY=y +CONFIG_IIO=m +CONFIG_AD5446=m CONFIG_PWM=y CONFIG_PWM_PXA=m CONFIG_PHY_SAMSUNG_USB2=m @@ -707,17 +646,8 @@ CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m -CONFIG_PRINTK_TIME=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_FRAME_WARN=0 -CONFIG_STRIP_ASM_SYMS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_SHIRQ=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_TIMER_STATS=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FTRACE_SYSCALLS=y -CONFIG_DEBUG_USER=y CONFIG_SECURITY=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_CRYPTD=m @@ -743,11 +673,6 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y -CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM=m -CONFIG_CRYPTO_SHA256_ARM=m -CONFIG_CRYPTO_SHA512_ARM=m -CONFIG_CRYPTO_AES_ARM=m CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=m CONFIG_FONTS=y @@ -755,3 +680,11 @@ CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_FONT_6x11=y CONFIG_FONT_MINI_4x6=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_FRAME_WARN=0 +CONFIG_STRIP_ASM_SYMS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FTRACE_SYSCALLS=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 5cd935e..8a59441 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -1,39 +1,38 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_MDM9615=y -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCIE_QCOM=y CONFIG_SMP=y -CONFIG_PREEMPT=y +CONFIG_ARM_PSCI=y CONFIG_HIGHMEM=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_FREQ=y +CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_COMPAT_BRK is not set CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y @@ -56,15 +55,18 @@ CONFIG_BT_HCIUART_BCM=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_QCOM=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y +CONFIG_MTD_QCOMSMEM_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_QCOMSMEM_PARTS=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -133,10 +135,10 @@ CONFIG_PINCTRL_MSM8660=y CONFIG_PINCTRL_MSM8960=y CONFIG_PINCTRL_MDM9615=y CONFIG_PINCTRL_MSM8X74=y -CONFIG_PINCTRL_SDX55=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y CONFIG_GPIOLIB=y +CONFIG_PINCTRL_SDX55=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y @@ -144,15 +146,17 @@ CONFIG_CHARGER_QCOM_SMBB=y CONFIG_CHARGER_BQ24190=m CONFIG_THERMAL=y CONFIG_QCOM_TSENS=y +CONFIG_WATCHDOG=y +CONFIG_QCOM_WDT=y CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_QCOM_RPM=y +CONFIG_REGULATOR_QCOM_RPMH=y CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y -CONFIG_REGULATOR_QCOM_RPMH=y CONFIG_MEDIA_SUPPORT=y CONFIG_DRM=y CONFIG_DRM_MSM=m @@ -160,11 +164,11 @@ CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y CONFIG_DRM_ANALOGIX_ANX78XX=m CONFIG_FB=y -CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_LM3630A=y CONFIG_BACKLIGHT_LP855X=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y @@ -180,6 +184,7 @@ CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MSM=y CONFIG_USB_ACM=y +CONFIG_USB_DWC3=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y @@ -196,7 +201,6 @@ CONFIG_USB_CONFIGFS_ECM=y CONFIG_USB_CONFIGFS_F_FS=y CONFIG_USB_ULPI_BUS=y CONFIG_USB_ETH=m -CONFIG_USB_DWC3=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y @@ -218,8 +222,8 @@ CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_A7PLL=y CONFIG_QCOM_CLK_APCS_SDX55=y CONFIG_QCOM_CLK_RPM=y -CONFIG_QCOM_CLK_RPMH=y CONFIG_QCOM_CLK_SMD_RPM=y +CONFIG_QCOM_CLK_RPMH=y CONFIG_APQ_MMCC_8084=y CONFIG_IPQ_GCC_4019=y CONFIG_IPQ_LCC_806X=y @@ -229,12 +233,12 @@ CONFIG_MDM_LCC_9615=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_SDX_GCC_55=y -CONFIG_MSM_IOMMU=y -CONFIG_ARM_SMMU=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_MAILBOX=y CONFIG_QCOM_APCS_IPC=y +CONFIG_MSM_IOMMU=y +CONFIG_ARM_SMMU=y CONFIG_REMOTEPROC=y CONFIG_QCOM_ADSP_PIL=y CONFIG_QCOM_Q6V5_PAS=y @@ -247,12 +251,12 @@ CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_OCMEM=y CONFIG_QCOM_PM=y +CONFIG_QCOM_RPMH=y +CONFIG_QCOM_RPMHPD=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y -CONFIG_QCOM_RPMH=y -CONFIG_QCOM_RPMHPD=y CONFIG_QCOM_WCNSS_CTRL=y CONFIG_EXTCON_QCOM_SPMI_MISC=y CONFIG_IIO=y @@ -270,10 +274,10 @@ CONFIG_BMP280=y CONFIG_PWM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y -CONFIG_PHY_QCOM_USB_HS=y -CONFIG_PHY_QCOM_USB_HSIC=y CONFIG_PHY_QCOM_QMP=y +CONFIG_PHY_QCOM_USB_HS=y CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y +CONFIG_PHY_QCOM_USB_HSIC=y CONFIG_QCOM_QFPROM=y CONFIG_INTERCONNECT=y CONFIG_INTERCONNECT_QCOM=y @@ -299,19 +303,15 @@ CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_USER_API=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_DEV_QCOM_RNG=m CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y +# CONFIG_SLUB_DEBUG is not set # CONFIG_SCHED_DEBUG is not set -CONFIG_WATCHDOG=y -CONFIG_QCOM_WDT=y -CONFIG_ARM_PSCI=y -CONFIG_CPU_FREQ=y -CONFIG_CPUFREQ_DT=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 3ef3521..92f803c 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -1,10 +1,8 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_FULL=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_REALVIEW=y CONFIG_MACH_REALVIEW_EB=y @@ -21,7 +19,8 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt CONFIG_VFP=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set +# CONFIG_SWAP is not set +CONFIG_SLAB=y CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y @@ -43,6 +42,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NETDEVICES=y CONFIG_SMC91X=y CONFIG_SMSC911X=y @@ -95,9 +95,9 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index c090643b..16d74a1 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -2,16 +2,15 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_RPC=y CONFIG_CPU_SA110=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -33,6 +32,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_ARXESCSI=m @@ -55,12 +55,12 @@ CONFIG_INPUT_EVDEV=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_RISCPC=y # CONFIG_SERIO_SERPORT is not set +CONFIG_LEGACY_PTY_COUNT=64 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=8 CONFIG_SERIAL_8250_ACORN=y -CONFIG_LEGACY_PTY_COUNT=64 CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set CONFIG_I2C=y @@ -69,9 +69,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_FB=y CONFIG_FB_ACORN=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x16=y -CONFIG_FONT_ACORN_8x8=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SOUND_PRIME=m @@ -89,10 +86,8 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_ADFS_FS=y CONFIG_NFS_FS=y -CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION_CUMANA is not set # CONFIG_ACORN_PARTITION_EESOX is not set -CONFIG_BSD_DISKLABEL=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m @@ -120,8 +115,11 @@ CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_KOI8_R=m -CONFIG_MAGIC_SYSRQ=y +CONFIG_FONTS=y +CONFIG_FONT_8x16=y +CONFIG_FONT_ACORN_8x8=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_LL_UART_8250=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 12fa6ca..41b4086 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -3,7 +3,6 @@ CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set @@ -38,18 +37,17 @@ CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_RX1950=y CONFIG_MACH_SMDK2443=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_APM_EMULATION=m CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -206,6 +204,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y @@ -252,7 +251,6 @@ CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 @@ -261,6 +259,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_DEV_BUS=m CONFIG_PRINTER=y CONFIG_PPDEV=y @@ -430,9 +429,9 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 59a258d..4f04f58 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -5,15 +5,6 @@ CONFIG_KALLSYMS_ALL=y CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C64XX=y -CONFIG_MACH_SMDK6400=y -CONFIG_MACH_ANW6410=y -CONFIG_MACH_MINI6410=y -CONFIG_MACH_REAL6410=y -CONFIG_MACH_SMDK6410=y -CONFIG_MACH_NCP=y -CONFIG_MACH_HMT=y -CONFIG_MACH_SMARTQ5=y -CONFIG_MACH_SMARTQ7=y CONFIG_MACH_WLF_CRAGG_6410=y CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" CONFIG_VFP=y @@ -71,9 +62,9 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 7091971..789e900a 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -21,7 +21,6 @@ CONFIG_VFP=y CONFIG_NEON=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y @@ -48,6 +47,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_NETDEVICES=y CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y @@ -115,9 +115,9 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_CRC_CCITT=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 1885280..3a6a485 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -1,5 +1,4 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y @@ -7,7 +6,6 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y -CONFIG_SLAB=y CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y @@ -26,8 +24,9 @@ CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SWAP is not set +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -72,6 +71,7 @@ CONFIG_ATMEL_SSC=y CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_NET_DSA_MICROCHIP_KSZ9477=m @@ -152,11 +152,11 @@ CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_ATMEL_ISC=y CONFIG_VIDEO_ATMEL_ISI=y +CONFIG_VIDEO_MT9V032=m CONFIG_VIDEO_OV2640=m CONFIG_VIDEO_OV5640=m CONFIG_VIDEO_OV7670=m CONFIG_VIDEO_OV7740=m -CONFIG_VIDEO_MT9V032=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y CONFIG_DRM_PANEL_SIMPLE=y diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 6330285..0384030 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -1,5 +1,4 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y @@ -14,8 +13,6 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_IO_URING is not set CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA7G5=y CONFIG_ATMEL_CLOCKSOURCE_TCB=y @@ -43,8 +40,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y # CONFIG_EFI_PARTITION is not set # CONFIG_COREDUMP is not set +# CONFIG_SWAP is not set +CONFIG_SLAB=y # CONFIG_COMPACTION is not set CONFIG_CMA=y +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -229,9 +229,9 @@ CONFIG_CRC_ITU_T=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=32 CONFIG_CMA_ALIGNMENT=9 +# CONFIG_DEBUG_MISC is not set # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_MISC is not set # CONFIG_SCHED_DEBUG is not set CONFIG_STACKTRACE=y # CONFIG_FTRACE is not set diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig index de33abd..42252e8 100644 --- a/arch/arm/configs/shannon_defconfig +++ b/arch/arm/configs/shannon_defconfig @@ -1,20 +1,20 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_SHANNON=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IPV6 is not set +CONFIG_PCCARD=y +CONFIG_PCMCIA_SA1100=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -40,5 +40,4 @@ CONFIG_VFAT_FS=y CONFIG_JFFS2_FS=y CONFIG_MINIX_FS=y CONFIG_NFS_FS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 362643c..a29bebb 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -6,7 +6,6 @@ CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y CONFIG_ARCH_RENESAS=y CONFIG_PL310_ERRATA_588369=y CONFIG_SMP=y @@ -25,6 +24,7 @@ CONFIG_CPUFREQ_DT=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_SLAB=y CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y @@ -106,6 +106,7 @@ CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=y CONFIG_RENESAS_WDT=y CONFIG_RENESAS_RZAWDT=y +CONFIG_RENESAS_RZN1WDT=y CONFIG_MFD_AS3711=y CONFIG_MFD_DA9063=y CONFIG_MFD_STMPE=y @@ -177,6 +178,7 @@ CONFIG_RTC_DRV_S35390A=y CONFIG_RTC_DRV_RX8581=y CONFIG_RTC_DRV_DA9063=y CONFIG_RTC_DRV_SH=y +CONFIG_RTC_DRV_RZN1=y CONFIG_DMADEVICES=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=y diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig index 28d99d8..cc45172 100644 --- a/arch/arm/configs/simpad_defconfig +++ b/arch/arm/configs/simpad_defconfig @@ -1,20 +1,16 @@ CONFIG_LOCALVERSION="oe1" CONFIG_SYSVIPC=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y CONFIG_ARCH_SA1100=y CONFIG_SA1100_SIMPAD=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_SA1100=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_NET=y @@ -25,18 +21,14 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRTTY_SIR=m -CONFIG_SA1100_FIR=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_PCCARD=y +CONFIG_PCMCIA_SA1100=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -56,19 +48,19 @@ CONFIG_DUMMY=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m +CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m CONFIG_PPP_FILTER=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m CONFIG_INPUT_MOUSEDEV_SCREEN_X=800 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600 CONFIG_INPUT_EVDEV=m @@ -83,6 +75,8 @@ CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m CONFIG_REISERFS_FS=m diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 2d9404e..d91ae3f 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -14,13 +14,10 @@ CONFIG_ARM_THUMBEE=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_VFP=y CONFIG_NEON=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -52,7 +49,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_SPI_NOR=y # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set -CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_OF_OVERLAY=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -64,6 +60,7 @@ CONFIG_EEPROM_AT24=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_ALTERA_TSE=m @@ -88,6 +85,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y +CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_SPI_DESIGNWARE=y CONFIG_SPI_DW_MMIO=y CONFIG_SPI_SPIDEV=y @@ -154,7 +152,7 @@ CONFIG_NFSD_V4=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig new file mode 100644 index 0000000..703b9aa --- /dev/null +++ b/arch/arm/configs/sp7021_defconfig @@ -0,0 +1,59 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_RD_GZIP is not set +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +CONFIG_ARCH_SUNPLUS=y +# CONFIG_VDSO is not set +CONFIG_SMP=y +CONFIG_THUMB2_KERNEL=y +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_INPUT_SPARSEKMAP=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_EXT4_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_EXFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig index 0655533..0227dd5 100644 --- a/arch/arm/configs/spear13xx_defconfig +++ b/arch/arm/configs/spear13xx_defconfig @@ -1,18 +1,11 @@ CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y # CONFIG_SWP_EMULATE is not set -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCIE_SPEAR13XX=y CONFIG_SMP=y # CONFIG_SMP_ON_UP is not set # CONFIG_ARM_CPU_TOPOLOGY is not set @@ -20,6 +13,10 @@ CONFIG_AEABI=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_UNIX=y @@ -28,6 +25,9 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_IPIP=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_SPEAR13XX=y CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_BLOCK=y @@ -97,8 +97,8 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index afca722..254d970 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -1,16 +1,16 @@ CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR3XX=y CONFIG_MACH_SPEAR300=y CONFIG_MACH_SPEAR310=y CONFIG_MACH_SPEAR320=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_MTD=y @@ -77,8 +77,8 @@ CONFIG_JFFS2_FS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index bc32c02..2809c4e 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -1,13 +1,13 @@ CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR6XX=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_PLAT_SPEAR=y -CONFIG_ARCH_SPEAR6XX=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_MTD=y @@ -66,8 +66,8 @@ CONFIG_JFFS2_FS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 43d079e..1284a1d 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -1,27 +1,23 @@ CONFIG_SYSVIPC=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_AKITA=y CONFIG_MACH_BORZOI=y -CONFIG_PCCARD=y -CONFIG_PCMCIA_PXA2XX=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" CONFIG_FPE_NWFPE=y CONFIG_BINFMT_AOUT=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_NET=y @@ -55,11 +51,6 @@ CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_PXA_FICP=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -78,6 +69,8 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m +CONFIG_PCCARD=y +CONFIG_PCMCIA_PXA2XX=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -91,10 +84,15 @@ CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=y CONFIG_PATA_PCMCIA=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y +CONFIG_PCMCIA_PCNET=m +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_ASYNC=m CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -102,10 +100,6 @@ CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_PCNET=m -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_BSDCOMP=m CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y @@ -116,11 +110,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_SPI=y CONFIG_SPI_PXA2XX=y CONFIG_FB=y @@ -131,11 +125,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m @@ -152,6 +141,8 @@ CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m CONFIG_USB=m CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m @@ -220,16 +211,12 @@ CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y -CONFIG_PARTITION_ADVANCED=y +CONFIG_NFS_V4=m CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_LL=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_ECB=m @@ -252,3 +239,9 @@ CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=m +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 71d6bfc..1f5446c 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -1,5 +1,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -11,8 +12,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EVENTFD is not set # CONFIG_AIO is not set CONFIG_EMBEDDED=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_MMU is not set CONFIG_ARCH_STM32=y @@ -21,14 +20,12 @@ CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x90000000 CONFIG_FLASH_MEM_BASE=0x08000000 CONFIG_FLASH_SIZE=0x00200000 -CONFIG_PREEMPT=y # CONFIG_ATAGS is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x08008000 CONFIG_BINFMT_FLAT=y # CONFIG_COREDUMP is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set @@ -38,9 +35,9 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_VT is not set # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -74,12 +71,13 @@ CONFIG_EXT3_FS=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set CONFIG_NLS=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y # CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_SLUB_DEBUG is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_CRYPTO=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 8ba7935..3d14827 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -97,9 +97,9 @@ CONFIG_IR_SUNXI=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SUN4I_CSI=y CONFIG_VIDEO_SUN6I_CSI=y -CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SUN8I_DEINTERLACE=y CONFIG_VIDEO_SUN8I_ROTATE=y CONFIG_DRM=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 46cbae6..3b29ae1 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -1,26 +1,25 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set -CONFIG_SLOB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +# CONFIG_KALLSYMS is not set CONFIG_ARCH_MULTI_V4T=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_S3C24XX=y CONFIG_MACH_TCT_HAMMER=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw" CONFIG_FPE_NWFPE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_SWAP is not set +CONFIG_SLOB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -55,5 +54,5 @@ CONFIG_JFFS2_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_LL=y CONFIG_CRC_CCITT=y +CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index c209722..71400af 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -16,7 +16,6 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_ELF_CORE is not set CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y CONFIG_ARCH_TEGRA=y CONFIG_SMP=y CONFIG_HIGHMEM=y @@ -29,12 +28,11 @@ CONFIG_CPU_IDLE=y CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y -CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y +CONFIG_SLAB=y CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y @@ -80,6 +78,7 @@ CONFIG_PCI_TEGRA=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_TEGRA_GMI=y +CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_MTD=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y @@ -91,6 +90,7 @@ CONFIG_ISL29003=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_BSG is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y CONFIG_SATA_AHCI=y @@ -114,9 +114,9 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_KEYBOARD_CAP11XX=y +CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_ELAN_I2C=m CONFIG_MOUSE_ELAN_I2C_SMBUS=y -CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_TOUCHSCREEN_ELAN=y @@ -139,6 +139,7 @@ CONFIG_I2C_MUX_GPIO=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y +CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_SPI=y CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y @@ -158,9 +159,9 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_BATTERY_SBS=y -CONFIG_CHARGER_BQ24735=y CONFIG_BATTERY_BQ27XXX=y CONFIG_CHARGER_GPIO=y +CONFIG_CHARGER_BQ24735=y CONFIG_CHARGER_SMB347=y CONFIG_CHARGER_TPS65090=y CONFIG_BATTERY_ACER_A500=y @@ -198,8 +199,10 @@ CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y -CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_GSPCA=y +CONFIG_USB_VIDEO_CLASS=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_TEGRA_VDE=y CONFIG_DRM=y CONFIG_DRM_NOUVEAU=m CONFIG_DRM_TEGRA=y @@ -286,13 +289,10 @@ CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_STAGING_MEDIA=y -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_TEGRA_VDE=y CONFIG_CHROME_PLATFORMS=y CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_SPI=m -CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARCH_TEGRA_2x_SOC=y @@ -343,7 +343,7 @@ CONFIG_CRYPTO_TWOFISH=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_VM=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index baeba46..009abe1 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -1,5 +1,6 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y @@ -8,25 +9,24 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4=y -CONFIG_PCCARD=y -# CONFIG_PCMCIA_LOAD_CIS is not set -CONFIG_PCMCIA_PXA2XX=y -CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5" CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_PM=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_LDM_PARTITION=y +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -39,14 +39,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_VLAN_8021Q=m -CONFIG_IRDA=m -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRTTY_SIR=m CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -55,6 +47,9 @@ CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_HIDP=m CONFIG_CFG80211=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_LOAD_CIS is not set +CONFIG_PCMCIA_PXA2XX=y CONFIG_CONNECTOR=y CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y @@ -77,13 +72,13 @@ CONFIG_MTD_DOC2001PLUS=y CONFIG_MTD_DOCPROBE_ADVANCED=y CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000 CONFIG_MTD_DOCPROBE_HIGH=y +CONFIG_MTD_ONENAND=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DISKONCHIP=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y -CONFIG_MTD_ONENAND=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=y @@ -97,9 +92,17 @@ CONFIG_ATA=m CONFIG_PATA_PCMCIA=m CONFIG_PATA_PLATFORM=m CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y CONFIG_NET_ETHERNET=y CONFIG_DM9000=y +CONFIG_PHYLIB=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_HOSTAP=y CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y @@ -107,14 +110,6 @@ CONFIG_HOSTAP_CS=y CONFIG_HERMES=y CONFIG_PCMCIA_HERMES=y CONFIG_PCMCIA_SPECTRUM=y -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 CONFIG_INPUT_EVDEV=y @@ -142,17 +137,14 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y -CONFIG_SND_SEQUENCER=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y +CONFIG_SND_SEQUENCER=y CONFIG_SND_PXA2XX_AC97=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set @@ -191,8 +183,6 @@ CONFIG_NFSD=y CONFIG_NFSD_V4=y CONFIG_SMB_FS=m CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_LDM_PARTITION=y CONFIG_NLS_DEFAULT="iso8859-15" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -200,9 +190,6 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_USER=y CONFIG_KEYS=y CONFIG_SECURITY=y CONFIG_CRYPTO_PCBC=m @@ -212,3 +199,9 @@ CONFIG_CRYPTO_DEFLATE=m CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_LIBCRC32C=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index a352207..3bdc217 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,4 +1,3 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y @@ -21,6 +20,7 @@ CONFIG_NEON=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y +# CONFIG_SWAP is not set CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index c2d79a6..67e3f91 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -4,7 +4,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_VERSATILE=y CONFIG_AEABI=y @@ -15,6 +14,7 @@ CONFIG_VFP=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y +CONFIG_SLAB=y CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y @@ -88,8 +88,8 @@ CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=m +CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index 9479877..4e3a013 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -20,15 +20,12 @@ CONFIG_MCPM=y CONFIG_VMSPLIT_2G=y CONFIG_NR_CPUS=8 CONFIG_ARM_PSCI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyAMA0" CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_CMA=y CONFIG_NET=y @@ -56,6 +53,7 @@ CONFIG_MTD_UBI=y CONFIG_VIRTIO_BLK=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_BSG is not set CONFIG_SCSI_VIRTIO=y CONFIG_ATA=y CONFIG_NETDEVICES=y @@ -135,9 +133,9 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y # CONFIG_CRYPTO_HW is not set CONFIG_DMA_CMA=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig index 70fdbfd..2e47cc5 100644 --- a/arch/arm/configs/vf610m4_defconfig +++ b/arch/arm/configs/vf610m4_defconfig @@ -16,9 +16,9 @@ CONFIG_FLASH_SIZE=0x01000000 CONFIG_CMDLINE="console=/dev/ttyLP2" CONFIG_XIP_KERNEL=y CONFIG_XIP_PHYS_ADDR=0x0f000080 +# CONFIG_SUSPEND is not set CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -# CONFIG_SUSPEND is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 7c10297..02f9849 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -1,23 +1,15 @@ -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=13 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_ARCH_VIPER=y CONFIG_IWMMXT=y -CONFIG_PCCARD=m -CONFIG_PCMCIA_PXA2XX=m CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m @@ -26,6 +18,11 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_FPE_FASTFPE=y CONFIG_PM=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +# CONFIG_SWAP is not set +CONFIG_SLAB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -41,6 +38,8 @@ CONFIG_BT_BNEP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y +CONFIG_PCCARD=m +CONFIG_PCMCIA_PXA2XX=m CONFIG_FW_LOADER=m CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y @@ -61,20 +60,21 @@ CONFIG_MTD_PXA2XX=y CONFIG_BLK_DEV_LOOP=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=m +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=m # CONFIG_SATA_PMP is not set CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_ASYNC=m CONFIG_USB_PEGASUS=m CONFIG_USB_USBNET=m # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_NET_PCMCIA=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m CONFIG_INPUT_MOUSEDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=m @@ -94,12 +94,12 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m # CONFIG_CONSOLE_TRANSLATIONS is not set # CONFIG_VT_CONSOLE is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_NR_UARTS=5 CONFIG_SERIAL_8250_RUNTIME_UARTS=5 CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set @@ -146,16 +146,15 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m +CONFIG_CRC_T10DIF=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y # CONFIG_FTRACE is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_ARC4=m -CONFIG_CRC_T10DIF=m diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig index 9b85326..cb8d38e 100644 --- a/arch/arm/configs/vt8500_v6_v7_defconfig +++ b/arch/arm/configs/vt8500_v6_v7_defconfig @@ -50,8 +50,8 @@ CONFIG_I2C_WMT=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_WM8750=y CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y +CONFIG_POWER_SUPPLY=y CONFIG_MFD_SYSCON=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 3752672..0453948 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -1,6 +1,8 @@ CONFIG_LOCALVERSION=".xcep-itech" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -10,26 +12,23 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_UID16 is not set # CONFIG_SHMEM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLOB=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLOCK is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_XCEP=y CONFIG_IWMMXT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200" CONFIG_FPE_NWFPE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLOCK is not set +CONFIG_SLOB=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=m CONFIG_UNIX=y @@ -54,9 +53,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=m CONFIG_I2C_CHARDEV=m @@ -78,13 +77,13 @@ CONFIG_NFS_V3=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_UTF8=m +# CONFIG_CRYPTO_HW is not set +CONFIG_LIBCRC32C=m CONFIG_PRINTK_TIME=y +# CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 03a12fb..c453531 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -1,17 +1,11 @@ CONFIG_SYSVIPC=y CONFIG_TINY_RCU=y CONFIG_LOG_BUF_SHIFT=13 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_PXA=y CONFIG_MACH_ARCOM_ZEUS=y -CONFIG_PCCARD=m -CONFIG_PCMCIA_PXA2XX=m CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_UNUSED_BOARD_FILES=y CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m @@ -21,6 +15,9 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_FPE_NWFPE=y CONFIG_PM=y CONFIG_APM_EMULATION=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -39,6 +36,8 @@ CONFIG_BT_HCIUART_BCSP=y CONFIG_CFG80211=m CONFIG_LIB80211=m CONFIG_MAC80211=m +CONFIG_PCCARD=m +CONFIG_PCMCIA_PXA2XX=m CONFIG_MTD=y CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y @@ -59,21 +58,22 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_EEPROM_AT24=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=m +# CONFIG_BLK_DEV_BSG is not set CONFIG_ATA=m # CONFIG_SATA_PMP is not set CONFIG_PATA_PCMCIA=m CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_DM9000=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_ASYNC=m CONFIG_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_RT2X00=m CONFIG_RT73USB=m CONFIG_NET_PCMCIA=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_KEYBOARD is not set @@ -90,11 +90,11 @@ CONFIG_TOUCHSCREEN_TOUCHWIN=m CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=7 CONFIG_SERIAL_8250_RUNTIME_UARTS=7 -# CONFIG_LEGACY_PTYS is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set @@ -161,14 +161,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m -CONFIG_MAGIC_SYSRQ=y +CONFIG_CRC_T10DIF=m CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_MUTEXES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_T10DIF=m diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index a81dda6..45180a2c 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -10,7 +10,7 @@ #else #define MAX_DMA_ADDRESS ({ \ extern phys_addr_t arm_dma_zone_size; \ - arm_dma_zone_size && arm_dma_zone_size < (0x10000000 - PAGE_OFFSET) ? \ + arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \ (PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; }) #endif diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index f1d0a78..41536fe 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -112,19 +112,6 @@ static __always_inline void set_domain(unsigned int val) } #endif -#ifdef CONFIG_CPU_USE_DOMAINS -#define modify_domain(dom,type) \ - do { \ - unsigned int domain = get_domain(); \ - domain &= ~domain_mask(dom); \ - domain = domain | domain_val(dom, type); \ - set_domain(domain); \ - } while (0) - -#else -static inline void modify_domain(unsigned dom, unsigned type) { } -#endif - /* * Generate the T (user) versions of the LDR/STR and related * instructions (inline assembly) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index eba7cbc..7fcdc78 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -139,11 +139,9 @@ extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int, extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached); void __arm_iomem_set_ro(void __iomem *ptr, size_t size); -extern void __iounmap(volatile void __iomem *addr); extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *); -extern void (*arch_iounmap)(volatile void __iomem *); /* * Bad read/write accesses... @@ -380,7 +378,7 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size); #define ioremap_wc ioremap_wc #define ioremap_wt ioremap_wc -void iounmap(volatile void __iomem *iomem_cookie); +void iounmap(volatile void __iomem *io_addr); #define iounmap iounmap void *arch_memremap_wb(phys_addr_t phys_addr, size_t size); diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 9228255..2b8970d 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -27,6 +27,7 @@ enum { MT_HIGH_VECTORS, MT_MEMORY_RWX, MT_MEMORY_RW, + MT_MEMORY_RO, MT_ROM, MT_MEMORY_RWX_NONCACHED, MT_MEMORY_RW_DTCM, diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 93051e2..1408a6a 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -163,5 +163,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs) ((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1; \ }) + +/* + * Update ITSTATE after normal execution of an IT block instruction. + * + * The 8 IT state bits are split into two parts in CPSR: + * ITSTATE<1:0> are in CPSR<26:25> + * ITSTATE<7:2> are in CPSR<15:10> + */ +static inline unsigned long it_advance(unsigned long cpsr) +{ + if ((cpsr & 0x06000400) == 0) { + /* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */ + cpsr &= ~PSR_IT_MASK; + } else { + /* We need to shift left ITSTATE<4:0> */ + const unsigned long mask = 0x06001c00; /* Mask ITSTATE<4:0> */ + unsigned long it = cpsr & mask; + it <<= 1; + it |= it >> (27 - 10); /* Carry ITSTATE<2> to correct place */ + it &= mask; + cpsr &= ~mask; + cpsr |= it; + } + return cpsr; +} + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/xen/xen-ops.h b/arch/arm/include/asm/xen/xen-ops.h new file mode 100644 index 0000000..7ebb7eb --- /dev/null +++ b/arch/arm/include/asm/xen/xen-ops.h @@ -0,0 +1,2 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 7aa3ded..6a447ac 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -302,6 +302,7 @@ local_restart: b ret_fast_syscall #endif ENDPROC(vector_swi) + .ltorg /* * This is the really slow path. We're going to be doing diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c index 303b3ab..eb9c24b 100644 --- a/arch/arm/kernel/jump_label.c +++ b/arch/arm/kernel/jump_label.c @@ -27,9 +27,3 @@ void arch_jump_label_transform(struct jump_entry *entry, { __arch_jump_label_transform(entry, type, false); } - -void arch_jump_label_transform_static(struct jump_entry *entry, - enum jump_label_type type) -{ - __arch_jump_label_transform(entry, type, true); -} diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index b5e8b9a..7fd3600 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -40,8 +40,8 @@ ENDPROC(_find_first_zero_bit_le) * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset) */ ENTRY(_find_next_zero_bit_le) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine ARM( ldrb r3, [r0, r2, lsr #3] ) @@ -81,8 +81,8 @@ ENDPROC(_find_first_bit_le) * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset) */ ENTRY(_find_next_bit_le) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine ARM( ldrb r3, [r0, r2, lsr #3] ) @@ -115,8 +115,8 @@ ENTRY(_find_first_zero_bit_be) ENDPROC(_find_first_zero_bit_be) ENTRY(_find_next_zero_bit_be) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering @@ -149,8 +149,8 @@ ENTRY(_find_first_bit_be) ENDPROC(_find_first_bit_be) ENTRY(_find_next_bit_be) - teq r1, #0 - beq 3b + cmp r2, r1 + bhs 3b ands ip, r2, #7 beq 1b @ If new byte, goto old routine eor r3, r2, #0x18 @ big endian byte ordering diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index b1a43d7..df6d673 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -202,7 +202,7 @@ static const struct wakeup_source_info ws_info[] = { static const struct of_device_id sama5d2_ws_ids[] = { { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] }, - { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,sama5d2-rtc", .data = &ws_info[1] }, { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] }, { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, @@ -213,24 +213,24 @@ static const struct of_device_id sama5d2_ws_ids[] = { }; static const struct of_device_id sam9x60_ws_ids[] = { - { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, + { .compatible = "microchip,sam9x60-rtc", .data = &ws_info[1] }, { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, { .compatible = "usb-ehci", .data = &ws_info[2] }, - { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, + { .compatible = "microchip,sam9x60-rtt", .data = &ws_info[4] }, { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] }, { /* sentinel */ } }; static const struct of_device_id sama7g5_ws_ids[] = { - { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, + { .compatible = "microchip,sama7g5-rtc", .data = &ws_info[1] }, { .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, { .compatible = "usb-ehci", .data = &ws_info[2] }, { .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] }, - { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, + { .compatible = "microchip,sama7g5-rtt", .data = &ws_info[4] }, { /* sentinel */ } }; @@ -1079,7 +1079,7 @@ securam_fail: return ret; } -static void at91_pm_secure_init(void) +static void __init at91_pm_secure_init(void) { int suspend_mode; struct arm_smccc_res res; diff --git a/arch/arm/mach-at91/sam_secure.c b/arch/arm/mach-at91/sam_secure.c index 2a01f7a..f7789cb 100644 --- a/arch/arm/mach-at91/sam_secure.c +++ b/arch/arm/mach-at91/sam_secure.c @@ -27,6 +27,12 @@ struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1) return res; } +bool sam_linux_is_optee_available(void) +{ + /* If optee has been detected, then we are running in normal world */ + return optee_available; +} + void __init sam_secure_init(void) { struct device_node *np; diff --git a/arch/arm/mach-at91/sam_secure.h b/arch/arm/mach-at91/sam_secure.h index 1e7d8b2..1a0b5eb 100644 --- a/arch/arm/mach-at91/sam_secure.h +++ b/arch/arm/mach-at91/sam_secure.h @@ -14,5 +14,6 @@ void __init sam_secure_init(void); struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1); +bool sam_linux_is_optee_available(void); #endif /* SAM_SECURE_H */ diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index de5dd28..67ed68fb 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -9,13 +9,27 @@ #include #include +#include #include #include +#include #include #include "generic.h" #include "sam_secure.h" +static void sama5_l2c310_write_sec(unsigned long val, unsigned reg) +{ + /* OP-TEE configures the L2 cache and does not allow modifying it yet */ +} + +static void __init sama5_secure_cache_init(void) +{ + sam_secure_init(); + if (sam_linux_is_optee_available()) + outer_cache.write_sec = sama5_l2c310_write_sec; +} + static void __init sama5_dt_device_init(void) { of_platform_default_populate(NULL, NULL, NULL); @@ -48,7 +62,6 @@ MACHINE_END static void __init sama5d2_init(void) { of_platform_default_populate(NULL, NULL, NULL); - sam_secure_init(); sama5d2_pm_init(); } @@ -60,6 +73,7 @@ static const char *const sama5d2_compat[] __initconst = { DT_MACHINE_START(sama5d2, "Atmel SAMA5") /* Maintainer: Atmel */ .init_machine = sama5d2_init, + .init_early = sama5_secure_cache_init, .dt_compat = sama5d2_compat, .l2c_aux_mask = ~0UL, MACHINE_END diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c index 512943e..2e20362 100644 --- a/arch/arm/mach-axxia/platsmp.c +++ b/arch/arm/mach-axxia/platsmp.c @@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle) return -ENOENT; syscon = of_iomap(syscon_np, 0); + of_node_put(syscon_np); if (!syscon) return -ENOMEM; diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index f73a056..8789d93 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -54,8 +54,6 @@ config ARCH_BCM_NSP select ARM_ERRATA_775420 select ARM_ERRATA_764369 if SMP select ARM_TIMER_SP804 - select THERMAL - select THERMAL_OF help Support for Broadcom Northstar Plus SoC. Broadcom Northstar Plus family of SoCs are used for switching control @@ -182,23 +180,6 @@ config ARCH_BCM_53573 The base chip is BCM53573 and there are some packaging modifications like BCM47189 and BCM47452. -config ARCH_BCM_63XX - bool "Broadcom BCM63xx DSL SoC" - depends on ARCH_MULTI_V7 - select ARCH_HAS_RESET_CONTROLLER - select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP - select ARM_GIC - select ARM_GLOBAL_TIMER - select CACHE_L2X0 - select HAVE_ARM_ARCH_TIMER - select HAVE_ARM_TWD if SMP - select HAVE_ARM_SCU if SMP - help - This enables support for systems based on Broadcom DSL SoCs. - It currently supports the 'BCM63XX' ARM-based family, which includes - the BCM63138 variant. - config ARCH_BRCMSTB bool "Broadcom BCM7XXX based boards" depends on ARCH_MULTI_V7 @@ -218,8 +199,8 @@ config ARCH_BRCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. -config ARCH_BCMBCA - bool "Broadcom Broadband SoC" +menuconfig ARCH_BCMBCA + bool "Broadcom Broadband Carrier Access (BCA) origin SoC" depends on ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC @@ -230,4 +211,46 @@ config ARCH_BCMBCA This enables support for Broadcom BCA ARM-based broadband chipsets, including the DSL, PON and Wireless family of chips. + +comment "BCMBCA sub platforms" + +if ARCH_BCMBCA + +config ARCH_BCMBCA_CORTEXA7 + bool "Cortex-A7 SoCs" + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM A7 + based chipset. + + This enables support for Broadcom BCA ARM A7 broadband chipsets, + including various DSL, PON and Wireless family of chips. + +config ARCH_BCMBCA_CORTEXA9 + bool "Cortex-A9 SoCS" + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARCH_HAS_RESET_CONTROLLER + select ARM_GLOBAL_TIMER + select CACHE_L2X0 + select HAVE_ARM_TWD if SMP + select HAVE_ARM_SCU if SMP + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM A9 + based BCA chipset. + + This enables support for Broadcom BCA ARM A9 broadband chipset. Currently + only DSL chip BCM63138. + +config ARCH_BCMBCA_BRAHMAB15 + bool "Brahma-B15 SoCs" + select ARM_ERRATA_798181 if SMP + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM B15 + based BCA chipset. + + This enables support for Broadcom BCA ARM B15 broadband chipset. Currently + only DSL chip BCM63148. + +endif + endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index b2394dd..020075e 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -57,14 +57,13 @@ ifeq ($(CONFIG_ARCH_BCM_5301X),y) obj-$(CONFIG_SMP) += platsmp.o endif -# BCM63XXx -ifeq ($(CONFIG_ARCH_BCM_63XX),y) -obj-y += bcm63xx.o -obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_pmb.o -endif - ifeq ($(CONFIG_ARCH_BRCMSTB),y) CFLAGS_platsmp-brcmstb.o += -march=armv7-a obj-y += brcmstb.o obj-$(CONFIG_SMP) += platsmp-brcmstb.o endif + +# BCMBCA +ifeq ($(CONFIG_ARCH_BCMBCA),y) +obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_pmb.o +endif diff --git a/arch/arm/mach-bcm/bcm63xx.c b/arch/arm/mach-bcm/bcm63xx.c deleted file mode 100644 index c4c66ae..0000000 --- a/arch/arm/mach-bcm/bcm63xx.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include - -#include - -static const char * const bcm63xx_dt_compat[] = { - "brcm,bcm63138", - NULL -}; - -DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC") - .dt_compat = bcm63xx_dt_compat, - .l2c_aux_val = 0, - .l2c_aux_mask = ~0, -MACHINE_END diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 43829e4..347bfb7 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -52,6 +52,7 @@ int __init bcm_kona_smc_init(void) return -ENODEV; prop_val = of_get_address(node, 0, &prop_size, NULL); + of_node_put(node); if (!prop_val) return -EINVAL; diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 1ecf546..1f85def 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" depends on ARCH_MULTI_V6 + depends on ATAGS && UNUSED_BOARD_FILES select ARM_GIC help Support for Cavium Networks CNS3XXX platform. diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index e4f4b20..3fc4ec8 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -372,6 +372,7 @@ static void __init cns3xxx_init(void) /* De-Asscer SATA Reset */ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA)); } + of_node_put(dn); dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci"); if (of_device_is_available(dn)) { @@ -385,6 +386,7 @@ static void __init cns3xxx_init(void) cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO)); } + of_node_put(dn); pm_power_off = cns3xxx_power_off; diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 008cbc2..c8cbd9a 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -19,24 +19,16 @@ config ARCH_DAVINCI_DMx comment "DaVinci Core Type" -config ARCH_DAVINCI_DM644x - bool "DaVinci 644x based system" - select DAVINCI_AINTC - select ARCH_DAVINCI_DMx - config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" - select DAVINCI_AINTC - select ARCH_DAVINCI_DMx - -config ARCH_DAVINCI_DM646x - bool "DaVinci 646x based system" + depends on ATAGS && UNUSED_BOARD_FILES select DAVINCI_AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE @@ -45,6 +37,7 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS select ARCH_DAVINCI_DA8XX select DAVINCI_CP_INTC @@ -53,6 +46,7 @@ config ARCH_DAVINCI_DA8XX config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" + depends on ATAGS && UNUSED_BOARD_FILES select DAVINCI_AINTC select ARCH_DAVINCI_DMx @@ -67,28 +61,6 @@ config MACH_DA8XX_DT Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree -config MACH_DAVINCI_EVM - bool "TI DM644x EVM" - default ARCH_DAVINCI_DM644x - depends on ARCH_DAVINCI_DM644x - help - Configure this option to specify the whether the board used - for development is a DM644x EVM - -config MACH_SFFSDR - bool "Lyrtech SFFSDR" - depends on ARCH_DAVINCI_DM644x - help - Say Y here to select the Lyrtech Small Form Factor - Software Defined Radio (SFFSDR) board. - -config MACH_NEUROS_OSD2 - bool "Neuros OSD2 Open Television Set Top Box" - depends on ARCH_DAVINCI_DM644x - help - Configure this option to specify the whether the board used - for development is a Neuros OSD2 Open Set Top Box. - config MACH_DAVINCI_DM355_EVM bool "TI DM355 EVM" default ARCH_DAVINCI_DM355 @@ -104,18 +76,6 @@ config MACH_DM355_LEOPARD Configure this option to specify the whether the board used for development is a DM355 Leopard board. -config MACH_DAVINCI_DM6467_EVM - bool "TI DM6467 EVM" - default ARCH_DAVINCI_DM646x - depends on ARCH_DAVINCI_DM646x - select MACH_DAVINCI_DM6467TEVM - help - Configure this option to specify the whether the board used - for development is a DM6467 EVM - -config MACH_DAVINCI_DM6467TEVM - bool - config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 @@ -127,6 +87,7 @@ config MACH_DAVINCI_DM365_EVM config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 + depends on ATAGS && UNUSED_BOARD_FILES depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X if I2C help @@ -156,6 +117,7 @@ endchoice config MACH_DAVINCI_DA850_EVM bool "TI DA850/OMAP-L138/AM18x Reference Platform" + depends on ATAGS && UNUSED_BOARD_FILES default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 help @@ -197,6 +159,7 @@ endchoice config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES help Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 System on Module. Information on this SoM may be found at @@ -205,6 +168,7 @@ config MACH_MITYOMAPL138 config MACH_OMAPL138_HAWKBOARD bool "TI AM1808 / OMAPL-138 Hawkboard platform" depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES help Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index b04c084..3f4894a 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -10,21 +10,15 @@ obj-y := serial.o usb.o common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o # Chip specific -obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o -obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o usb-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o usb-da8xx.o # Board specific obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o pdata-quirks.o -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o -obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o -obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o -obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c deleted file mode 100644 index 9f405af..0000000 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ /dev/null @@ -1,928 +0,0 @@ -/* - * TI DaVinci EVM board support - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "davinci.h" -#include "common.h" -#include "mux.h" -#include "serial.h" -#include "irqs.h" - -#define DM644X_EVM_PHY_ID "davinci_mdio-0:01" -#define LXT971_PHY_ID (0x001378e2) -#define LXT971_PHY_MASK (0xfffffff0) - -static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ - { - .name = "bootloader", - .offset = 0, - .size = 5 * SZ_64K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next 1 sectors */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data davinci_evm_norflash_data = { - .width = 2, - .parts = davinci_evm_norflash_partitions, - .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), -}; - -/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF - * limits addresses to 16M, so using addresses past 16M will wrap */ -static struct resource davinci_evm_norflash_resource = { - .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, - .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device davinci_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &davinci_evm_norflash_data, - }, - .num_resources = 1, - .resource = &davinci_evm_norflash_resource, -}; - -/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). - * It may used instead of the (default) NOR chip to boot, using TI's - * tools to install the secondary boot loader (UBL) and U-Boot. - */ -static struct mtd_partition davinci_evm_nandflash_partition[] = { - /* Bootloader layout depends on whose u-boot is installed, but we - * can hide all the details. - * - block 0 for u-boot environment ... in mainline u-boot - * - block 1 for UBL (plus up to four backup copies in blocks 2..5) - * - blocks 6...? for u-boot - * - blocks 16..23 for u-boot environment ... in TI's u-boot - */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_256K + SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* Kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, - /* File system (older GIT kernels started this on the 5MB mark) */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } - /* A few blocks at end hold a flash BBT ... created by TI's CCS - * using flashwriter_nand.out, but ignored by TI's versions of - * Linux and u-boot. We boot faster by using them. - */ -}; - -static struct davinci_aemif_timing davinci_evm_nandflash_timing = { - .wsetup = 20, - .wstrobe = 40, - .whold = 20, - .rsetup = 10, - .rstrobe = 40, - .rhold = 10, - .ta = 40, -}; - -static struct davinci_nand_pdata davinci_evm_nandflash_data = { - .core_chipsel = 0, - .parts = davinci_evm_nandflash_partition, - .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_bits = 1, - .bbt_options = NAND_BBT_USE_FLASH, - .timing = &davinci_evm_nandflash_timing, -}; - -static struct resource davinci_evm_nandflash_resource[] = { - { - .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, - .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM644X_ASYNC_EMIF_CONTROL_BASE, - .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource davinci_evm_aemif_resource[] = { - { - .start = DM644X_ASYNC_EMIF_CONTROL_BASE, - .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct aemif_abus_data davinci_evm_aemif_abus_data[] = { - { - .cs = 1, - }, -}; - -static struct platform_device davinci_evm_nandflash_devices[] = { - { - .name = "davinci_nand", - .id = 0, - .dev = { - .platform_data = &davinci_evm_nandflash_data, - }, - .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), - .resource = davinci_evm_nandflash_resource, - }, -}; - -static struct aemif_platform_data davinci_evm_aemif_pdata = { - .abus_data = davinci_evm_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data), - .sub_devices = davinci_evm_nandflash_devices, - .num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices), -}; - -static struct platform_device davinci_evm_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &davinci_evm_aemif_pdata, - }, - .resource = davinci_evm_aemif_resource, - .num_resources = ARRAY_SIZE(davinci_evm_aemif_resource), -}; - -static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device davinci_fb_device = { - .name = "davincifb", - .id = -1, - .dev = { - .dma_mask = &davinci_fb_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = 0, -}; - -static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = { - .clk_polarity = 0, - .hs_polarity = 1, - .vs_polarity = 1 -}; - -#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) -/* Inputs available at the TVP5146 */ -static struct v4l2_input dm644xevm_tvp5146_inputs[] = { - { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = TVP514X_STD_ALL, - }, - { - .index = 1, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = TVP514X_STD_ALL, - }, -}; - -/* - * this is the route info for connecting each input to decoder - * ouput that goes to vpfe. There is a one to one correspondence - * with tvp5146_inputs - */ -static struct vpfe_route dm644xevm_tvp5146_routes[] = { - { - .input = INPUT_CVBS_VI2B, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, - { - .input = INPUT_SVIDEO_VI2C_VI1C, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -}; - -static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = { - { - .name = "tvp5146", - .grp_id = 0, - .num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs), - .inputs = dm644xevm_tvp5146_inputs, - .routes = dm644xevm_tvp5146_routes, - .can_route = 1, - .ccdc_if_params = { - .if_type = VPFE_BT656, - .hdpol = VPFE_PINPOL_POSITIVE, - .vdpol = VPFE_PINPOL_POSITIVE, - }, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &dm644xevm_tvp5146_pdata, - }, - }, -}; - -static struct vpfe_config dm644xevm_capture_cfg = { - .num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs), - .i2c_adapter_id = 1, - .sub_devs = dm644xevm_vpfe_sub_devs, - .card_name = "DM6446 EVM", - .ccdc = "DM6446 CCDC", -}; - -static struct platform_device rtc_dev = { - .name = "rtc_davinci_evm", - .id = -1, -}; - -/*----------------------------------------------------------------------*/ -#ifdef CONFIG_I2C -/* - * I2C GPIO expanders - */ - -#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) - - -/* U2 -- LEDs */ - -static struct gpio_led evm_leds[] = { - { .name = "DS8", .active_low = 1, - .default_trigger = "heartbeat", }, - { .name = "DS7", .active_low = 1, }, - { .name = "DS6", .active_low = 1, }, - { .name = "DS5", .active_low = 1, }, - { .name = "DS4", .active_low = 1, }, - { .name = "DS3", .active_low = 1, }, - { .name = "DS2", .active_low = 1, - .default_trigger = "mmc0", }, - { .name = "DS1", .active_low = 1, - .default_trigger = "disk-activity", }, -}; - -static const struct gpio_led_platform_data evm_led_data = { - .num_leds = ARRAY_SIZE(evm_leds), - .leds = evm_leds, -}; - -static struct platform_device *evm_led_dev; - -static int -evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - struct gpio_led *leds = evm_leds; - int status; - - while (ngpio--) { - leds->gpio = gpio++; - leds++; - } - - /* what an extremely annoying way to be forced to handle - * device unregistration ... - */ - evm_led_dev = platform_device_alloc("leds-gpio", 0); - platform_device_add_data(evm_led_dev, - &evm_led_data, sizeof evm_led_data); - - evm_led_dev->dev.parent = &client->dev; - status = platform_device_add(evm_led_dev); - if (status < 0) { - platform_device_put(evm_led_dev); - evm_led_dev = NULL; - } - return status; -} - -static void -evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - if (evm_led_dev) { - platform_device_unregister(evm_led_dev); - evm_led_dev = NULL; - } -} - -static struct pcf857x_platform_data pcf_data_u2 = { - .gpio_base = PCF_Uxx_BASE(0), - .setup = evm_led_setup, - .teardown = evm_led_teardown, -}; - - -/* U18 - A/V clock generator and user switch */ - -static int sw_gpio; - -static ssize_t -sw_show(struct device *d, struct device_attribute *a, char *buf) -{ - char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; - - strcpy(buf, s); - return strlen(s); -} - -static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); - -static int -evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - int status; - - /* export dip switch option */ - sw_gpio = gpio + 7; - status = gpio_request(sw_gpio, "user_sw"); - if (status == 0) - status = gpio_direction_input(sw_gpio); - if (status == 0) - status = device_create_file(&client->dev, &dev_attr_user_sw); - else - gpio_free(sw_gpio); - if (status != 0) - sw_gpio = -EINVAL; - - /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ - gpio_request(gpio + 3, "pll_fs2"); - gpio_direction_output(gpio + 3, 0); - - gpio_request(gpio + 2, "pll_fs1"); - gpio_direction_output(gpio + 2, 0); - - gpio_request(gpio + 1, "pll_sr"); - gpio_direction_output(gpio + 1, 0); - - return 0; -} - -static void -evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 1); - gpio_free(gpio + 2); - gpio_free(gpio + 3); - - if (sw_gpio > 0) { - device_remove_file(&client->dev, &dev_attr_user_sw); - gpio_free(sw_gpio); - } -} - -static struct pcf857x_platform_data pcf_data_u18 = { - .gpio_base = PCF_Uxx_BASE(1), - .n_latch = (1 << 3) | (1 << 2) | (1 << 1), - .setup = evm_u18_setup, - .teardown = evm_u18_teardown, -}; - - -/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ - -static int -evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - /* p0 = nDRV_VBUS (initial: don't supply it) */ - gpio_request(gpio + 0, "nDRV_VBUS"); - gpio_direction_output(gpio + 0, 1); - - /* p1 = VDDIMX_EN */ - gpio_request(gpio + 1, "VDDIMX_EN"); - gpio_direction_output(gpio + 1, 1); - - /* p2 = VLYNQ_EN */ - gpio_request(gpio + 2, "VLYNQ_EN"); - gpio_direction_output(gpio + 2, 1); - - /* p3 = n3V3_CF_RESET (initial: stay in reset) */ - gpio_request(gpio + 3, "nCF_RESET"); - gpio_direction_output(gpio + 3, 0); - - /* (p4 unused) */ - - /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ - gpio_request(gpio + 5, "WLAN_RESET"); - gpio_direction_output(gpio + 5, 1); - - /* p6 = nATA_SEL (initial: select) */ - gpio_request(gpio + 6, "nATA_SEL"); - gpio_direction_output(gpio + 6, 0); - - /* p7 = nCF_SEL (initial: deselect) */ - gpio_request(gpio + 7, "nCF_SEL"); - gpio_direction_output(gpio + 7, 1); - - return 0; -} - -static void -evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 7); - gpio_free(gpio + 6); - gpio_free(gpio + 5); - gpio_free(gpio + 3); - gpio_free(gpio + 2); - gpio_free(gpio + 1); - gpio_free(gpio + 0); -} - -static struct pcf857x_platform_data pcf_data_u35 = { - .gpio_base = PCF_Uxx_BASE(2), - .setup = evm_u35_setup, - .teardown = evm_u35_teardown, -}; - -/*----------------------------------------------------------------------*/ - -/* Most of this EEPROM is unused, but U-Boot uses some data: - * - 0x7f00, 6 bytes Ethernet Address - * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) - * - ... newer boards may have more - */ - -static struct nvmem_cell_info dm644evm_nvmem_cells[] = { - { - .name = "macaddr", - .offset = 0x7f00, - .bytes = ETH_ALEN, - } -}; - -static struct nvmem_cell_table dm644evm_nvmem_cell_table = { - .nvmem_name = "1-00500", - .cells = dm644evm_nvmem_cells, - .ncells = ARRAY_SIZE(dm644evm_nvmem_cells), -}; - -static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = { - .nvmem_name = "1-00500", - .cell_name = "macaddr", - .dev_id = "davinci_emac.1", - .con_id = "mac-address", -}; - -static const struct property_entry eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 64), - { } -}; - -static const struct software_node eeprom_node = { - .properties = eeprom_properties, -}; - -/* - * MSP430 supports RTC, card detection, input from IR remote, and - * a bit more. It triggers interrupts on GPIO(7) from pressing - * buttons on the IR remote, and for card detect switches. - */ -static struct i2c_client *dm6446evm_msp; - -static int dm6446evm_msp_probe(struct i2c_client *client) -{ - dm6446evm_msp = client; - return 0; -} - -static int dm6446evm_msp_remove(struct i2c_client *client) -{ - dm6446evm_msp = NULL; - return 0; -} - -static const struct i2c_device_id dm6446evm_msp_ids[] = { - { "dm6446evm_msp", 0, }, - { /* end of list */ }, -}; - -static struct i2c_driver dm6446evm_msp_driver = { - .driver.name = "dm6446evm_msp", - .id_table = dm6446evm_msp_ids, - .probe_new = dm6446evm_msp_probe, - .remove = dm6446evm_msp_remove, -}; - -static int dm6444evm_msp430_get_pins(void) -{ - static const char txbuf[2] = { 2, 4, }; - char buf[4]; - struct i2c_msg msg[2] = { - { - .flags = 0, - .len = 2, - .buf = (void __force *)txbuf, - }, - { - .flags = I2C_M_RD, - .len = 4, - .buf = buf, - }, - }; - int status; - - if (!dm6446evm_msp) - return -ENXIO; - - msg[0].addr = dm6446evm_msp->addr; - msg[1].addr = dm6446evm_msp->addr; - - /* Command 4 == get input state, returns port 2 and port3 data - * S Addr W [A] len=2 [A] cmd=4 [A] - * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P - */ - status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); - if (status < 0) - return status; - - dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf); - - return (buf[3] << 8) | buf[2]; -} - -static int dm6444evm_mmc_get_cd(int module) -{ - int status = dm6444evm_msp430_get_pins(); - - return (status < 0) ? status : !(status & BIT(1)); -} - -static int dm6444evm_mmc_get_ro(int module) -{ - int status = dm6444evm_msp430_get_pins(); - - return (status < 0) ? status : status & BIT(6 + 8); -} - -static struct davinci_mmc_config dm6446evm_mmc_config = { - .get_cd = dm6444evm_mmc_get_cd, - .get_ro = dm6444evm_mmc_get_ro, - .wires = 4, -}; - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("dm6446evm_msp", 0x23), - }, - { - I2C_BOARD_INFO("pcf8574", 0x38), - .platform_data = &pcf_data_u2, - }, - { - I2C_BOARD_INFO("pcf8574", 0x39), - .platform_data = &pcf_data_u18, - }, - { - I2C_BOARD_INFO("pcf8574", 0x3a), - .platform_data = &pcf_data_u35, - }, - { - I2C_BOARD_INFO("24c256", 0x50), - .swnode = &eeprom_node, - }, - { - I2C_BOARD_INFO("tlv320aic33", 0x1b), - }, -}; - -#define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12) -#define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11) - -static struct gpiod_lookup_table i2c_recovery_gpiod_table = { - .dev_id = "i2c_davinci.1", - .table = { - GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda", - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl", - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - { } - }, -}; - -/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), - * which requires 100 usec of idle bus after i2c writes sent to it. - */ -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, - .gpio_recovery = true, -}; - -static void __init evm_init_i2c(void) -{ - gpiod_add_lookup_table(&i2c_recovery_gpiod_table); - davinci_init_i2c(&i2c_pdata); - i2c_add_driver(&dm6446evm_msp_driver); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); -} -#endif - -/* Fixed regulator support */ -static struct regulator_consumer_supply fixed_supplies_3_3v[] = { - /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */ - REGULATOR_SUPPLY("AVDD", "1-001b"), - REGULATOR_SUPPLY("DRVDD", "1-001b"), -}; - -static struct regulator_consumer_supply fixed_supplies_1_8v[] = { - /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */ - REGULATOR_SUPPLY("IOVDD", "1-001b"), - REGULATOR_SUPPLY("DVDD", "1-001b"), -}; - -#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) - -/* venc standard timings */ -static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { - { - .name = "ntsc", - .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_NTSC, - .interlaced = 1, - .xres = 720, - .yres = 480, - .aspect = {11, 10}, - .fps = {30000, 1001}, - .left_margin = 0x79, - .upper_margin = 0x10, - }, - { - .name = "pal", - .timings_type = VPBE_ENC_STD, - .std_id = V4L2_STD_PAL, - .interlaced = 1, - .xres = 720, - .yres = 576, - .aspect = {54, 59}, - .fps = {25, 1}, - .left_margin = 0x7e, - .upper_margin = 0x16, - }, -}; - -/* venc dv preset timings */ -static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { - { - .name = "480p59_94", - .timings_type = VPBE_ENC_DV_TIMINGS, - .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, - .interlaced = 0, - .xres = 720, - .yres = 480, - .aspect = {1, 1}, - .fps = {5994, 100}, - .left_margin = 0x80, - .upper_margin = 0x20, - }, - { - .name = "576p50", - .timings_type = VPBE_ENC_DV_TIMINGS, - .dv_timings = V4L2_DV_BT_CEA_720X576P50, - .interlaced = 0, - .xres = 720, - .yres = 576, - .aspect = {1, 1}, - .fps = {50, 1}, - .left_margin = 0x7e, - .upper_margin = 0x30, - }, -}; - -/* - * The outputs available from VPBE + encoders. Keep the order same - * as that of encoders. First those from venc followed by that from - * encoders. Index in the output refers to index on a particular encoder. - * Driver uses this index to pass it to encoder when it supports more - * than one output. Userspace applications use index of the array to - * set an output. - */ -static struct vpbe_output dm644xevm_vpbe_outputs[] = { - { - .output = { - .index = 0, - .name = "Composite", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .std = VENC_STD_ALL, - .capabilities = V4L2_OUT_CAP_STD, - }, - .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME, - .default_mode = "ntsc", - .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing), - .modes = dm644xevm_enc_std_timing, - }, - { - .output = { - .index = 1, - .name = "Component", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_DV_TIMINGS, - }, - .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME, - .default_mode = "480p59_94", - .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing), - .modes = dm644xevm_enc_preset_timing, - }, -}; - -static struct vpbe_config dm644xevm_display_cfg = { - .module_name = "dm644x-vpbe-display", - .i2c_adapter_id = 1, - .osd = { - .module_name = DM644X_VPBE_OSD_SUBDEV_NAME, - }, - .venc = { - .module_name = DM644X_VPBE_VENC_SUBDEV_NAME, - }, - .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs), - .outputs = dm644xevm_vpbe_outputs, -}; - -static struct platform_device *davinci_evm_devices[] __initdata = { - &davinci_fb_device, - &rtc_dev, -}; - -static void __init -davinci_evm_map_io(void) -{ - dm644x_init(); -} - -static int davinci_phy_fixup(struct phy_device *phydev) -{ - unsigned int control; - /* CRITICAL: Fix for increasing PHY signal drive strength for - * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY - * signal strength was low causing TX to fail randomly. The - * fix is to Set bit 11 (Increased MII drive strength) of PHY - * register 26 (Digital Config register) on this phy. */ - control = phy_read(phydev, 26); - phy_write(phydev, 26, (control | 0x800)); - return 0; -} - -#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - IS_ENABLED(CONFIG_PATA_BK3710)) - -#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP) - -#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) - -#define GPIO_nVBUS_DRV 160 - -static struct gpiod_lookup_table dm644evm_usb_gpio_table = { - .dev_id = "musb-davinci", - .table = { - GPIO_LOOKUP("davinci_gpio", GPIO_nVBUS_DRV, NULL, - GPIO_ACTIVE_HIGH), - { } - }, -}; - -static __init void davinci_evm_init(void) -{ - int ret; - struct clk *aemif_clk; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - dm644x_register_clocks(); - - regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v, - ARRAY_SIZE(fixed_supplies_1_8v), 1800000); - regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v, - ARRAY_SIZE(fixed_supplies_3_3v), 3300000); - - dm644x_init_devices(); - - ret = dm644x_gpio_register(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - aemif_clk = clk_get(NULL, "aemif"); - clk_prepare_enable(aemif_clk); - - if (HAS_ATA) { - if (HAS_NAND || HAS_NOR) - pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n" - "\tDisable IDE for NAND/NOR support\n"); - davinci_init_ide(); - } else if (HAS_NAND || HAS_NOR) { - davinci_cfg_reg(DM644X_HPIEN_DISABLE); - davinci_cfg_reg(DM644X_ATAEN_DISABLE); - - /* only one device will be jumpered and detected */ - if (HAS_NAND) { - platform_device_register(&davinci_evm_aemif_device); -#ifdef CONFIG_I2C - evm_leds[7].default_trigger = "nand-disk"; -#endif - if (HAS_NOR) - pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n"); - } else if (HAS_NOR) - platform_device_register(&davinci_evm_norflash_device); - } - - platform_add_devices(davinci_evm_devices, - ARRAY_SIZE(davinci_evm_devices)); -#ifdef CONFIG_I2C - nvmem_add_cell_table(&dm644evm_nvmem_cell_table); - nvmem_add_cell_lookups(&dm644evm_nvmem_cell_lookup, 1); - evm_init_i2c(); - davinci_setup_mmc(0, &dm6446evm_mmc_config); -#endif - dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); - - davinci_serial_init(dm644x_serial_device); - dm644x_init_asp(); - - /* irlml6401 switches over 1A, in under 8 msec */ - gpiod_add_lookup_table(&dm644evm_usb_gpio_table); - davinci_setup_usb(1000, 8); - - if (IS_BUILTIN(CONFIG_PHYLIB)) { - soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; - /* Register the fixup for PHY on DaVinci */ - phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, - davinci_phy_fixup); - } -} - -MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") - /* Maintainer: MontaVista Software */ - .atag_offset = 0x100, - .map_io = davinci_evm_map_io, - .init_irq = dm644x_init_irq, - .init_time = dm644x_init_time, - .init_machine = davinci_evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c deleted file mode 100644 index 84ad065..0000000 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ /dev/null @@ -1,873 +0,0 @@ -/* - * TI DaVinci DM646X EVM board - * - * Derived from: arch/arm/mach-davinci/board-evm.c - * Copyright (C) 2006 Texas Instruments. - * - * (C) 2007-2008, MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -/************************************************************************** - * Included Files - **************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "common.h" -#include "serial.h" -#include "davinci.h" -#include "irqs.h" - -#define NAND_BLOCK_SIZE SZ_128K - -/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot - * and U-Boot environment this avoids dependency on any particular combination - * of UBL, U-Boot or flashing tools etc. - */ -static struct mtd_partition davinci_nand_partitions[] = { - { - /* UBL, U-Boot with environment */ - .name = "bootloader", - .offset = MTDPART_OFS_APPEND, - .size = 16 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } -}; - -static struct davinci_aemif_timing dm6467tevm_nandflash_timing = { - .wsetup = 29, - .wstrobe = 24, - .whold = 14, - .rsetup = 19, - .rstrobe = 33, - .rhold = 0, - .ta = 29, -}; - -static struct davinci_nand_pdata davinci_nand_data = { - .core_chipsel = 0, - .mask_cle = 0x80000, - .mask_ale = 0x40000, - .parts = davinci_nand_partitions, - .nr_parts = ARRAY_SIZE(davinci_nand_partitions), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_bits = 1, - .options = 0, -}; - -static struct resource davinci_nand_resources[] = { - { - .start = DM646X_ASYNC_EMIF_CS2_SPACE_BASE, - .end = DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM646X_ASYNC_EMIF_CONTROL_BASE, - .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_aemif_devices[] = { - { - .name = "davinci_nand", - .id = 0, - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - .dev = { - .platform_data = &davinci_nand_data, - }, - }, -}; - -static struct resource davinci_aemif_resources[] = { - { - .start = DM646X_ASYNC_EMIF_CONTROL_BASE, - .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct aemif_abus_data davinci_aemif_abus_data[] = { - { - .cs = 1, - }, -}; - -static struct aemif_platform_data davinci_aemif_pdata = { - .abus_data = davinci_aemif_abus_data, - .num_abus_data = ARRAY_SIZE(davinci_aemif_abus_data), - .sub_devices = davinci_aemif_devices, - .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices), -}; - -static struct platform_device davinci_aemif_device = { - .name = "ti-aemif", - .id = -1, - .dev = { - .platform_data = &davinci_aemif_pdata, - }, - .resource = davinci_aemif_resources, - .num_resources = ARRAY_SIZE(davinci_aemif_resources), -}; - -#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - IS_ENABLED(CONFIG_PATA_BK3710)) - -#ifdef CONFIG_I2C -/* CPLD Register 0 bits to control ATA */ -#define DM646X_EVM_ATA_RST BIT(0) -#define DM646X_EVM_ATA_PWD BIT(1) - -/* CPLD Register 0 Client: used for I/O Control */ -static int cpld_reg0_probe(struct i2c_client *client) -{ - if (HAS_ATA) { - u8 data; - struct i2c_msg msg[2] = { - { - .addr = client->addr, - .flags = I2C_M_RD, - .len = 1, - .buf = &data, - }, - { - .addr = client->addr, - .flags = 0, - .len = 1, - .buf = &data, - }, - }; - - /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */ - i2c_transfer(client->adapter, msg, 1); - data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD); - i2c_transfer(client->adapter, msg + 1, 1); - } - - return 0; -} - -static const struct i2c_device_id cpld_reg_ids[] = { - { "cpld_reg0", 0, }, - { }, -}; - -static struct i2c_driver dm6467evm_cpld_driver = { - .driver.name = "cpld_reg0", - .id_table = cpld_reg_ids, - .probe_new = cpld_reg0_probe, -}; - -/* LEDS */ - -static struct gpio_led evm_leds[] = { - { .name = "DS1", .active_low = 1, }, - { .name = "DS2", .active_low = 1, }, - { .name = "DS3", .active_low = 1, }, - { .name = "DS4", .active_low = 1, }, -}; - -static const struct gpio_led_platform_data evm_led_data = { - .num_leds = ARRAY_SIZE(evm_leds), - .leds = evm_leds, -}; - -static struct platform_device *evm_led_dev; - -static int evm_led_setup(struct i2c_client *client, int gpio, - unsigned int ngpio, void *c) -{ - struct gpio_led *leds = evm_leds; - int status; - - while (ngpio--) { - leds->gpio = gpio++; - leds++; - } - - evm_led_dev = platform_device_alloc("leds-gpio", 0); - platform_device_add_data(evm_led_dev, &evm_led_data, - sizeof(evm_led_data)); - - evm_led_dev->dev.parent = &client->dev; - status = platform_device_add(evm_led_dev); - if (status < 0) { - platform_device_put(evm_led_dev); - evm_led_dev = NULL; - } - return status; -} - -static int evm_led_teardown(struct i2c_client *client, int gpio, - unsigned ngpio, void *c) -{ - if (evm_led_dev) { - platform_device_unregister(evm_led_dev); - evm_led_dev = NULL; - } - return 0; -} - -static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL }; - -static int evm_sw_setup(struct i2c_client *client, int gpio, - unsigned ngpio, void *c) -{ - int status; - int i; - char label[10]; - - for (i = 0; i < 4; ++i) { - snprintf(label, 10, "user_sw%d", i); - status = gpio_request(gpio, label); - if (status) - goto out_free; - evm_sw_gpio[i] = gpio++; - - status = gpio_direction_input(evm_sw_gpio[i]); - if (status) - goto out_free; - - status = gpio_export(evm_sw_gpio[i], 0); - if (status) - goto out_free; - } - return 0; - -out_free: - for (i = 0; i < 4; ++i) { - if (evm_sw_gpio[i] != -EINVAL) { - gpio_free(evm_sw_gpio[i]); - evm_sw_gpio[i] = -EINVAL; - } - } - return status; -} - -static int evm_sw_teardown(struct i2c_client *client, int gpio, - unsigned ngpio, void *c) -{ - int i; - - for (i = 0; i < 4; ++i) { - if (evm_sw_gpio[i] != -EINVAL) { - gpio_unexport(evm_sw_gpio[i]); - gpio_free(evm_sw_gpio[i]); - evm_sw_gpio[i] = -EINVAL; - } - } - return 0; -} - -static int evm_pcf_setup(struct i2c_client *client, int gpio, - unsigned int ngpio, void *c) -{ - int status; - - if (ngpio < 8) - return -EINVAL; - - status = evm_sw_setup(client, gpio, 4, c); - if (status) - return status; - - return evm_led_setup(client, gpio+4, 4, c); -} - -static void evm_pcf_teardown(struct i2c_client *client, int gpio, - unsigned int ngpio, void *c) -{ - BUG_ON(ngpio < 8); - - evm_sw_teardown(client, gpio, 4, c); - evm_led_teardown(client, gpio+4, 4, c); -} - -static struct pcf857x_platform_data pcf_data = { - .gpio_base = DAVINCI_N_GPIO+1, - .setup = evm_pcf_setup, - .teardown = evm_pcf_teardown, -}; - -/* Most of this EEPROM is unused, but U-Boot uses some data: - * - 0x7f00, 6 bytes Ethernet Address - * - ... newer boards may have more - */ - -static struct nvmem_cell_info dm646x_evm_nvmem_cells[] = { - { - .name = "macaddr", - .offset = 0x7f00, - .bytes = ETH_ALEN, - } -}; - -static struct nvmem_cell_table dm646x_evm_nvmem_cell_table = { - .nvmem_name = "1-00500", - .cells = dm646x_evm_nvmem_cells, - .ncells = ARRAY_SIZE(dm646x_evm_nvmem_cells), -}; - -static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = { - .nvmem_name = "1-00500", - .cell_name = "macaddr", - .dev_id = "davinci_emac.1", - .con_id = "mac-address", -}; - -static const struct property_entry eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 64), - { } -}; - -static const struct software_node eeprom_node = { - .properties = eeprom_properties, -}; -#endif - -static u8 dm646x_iis_serializer_direction[] = { - TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE, -}; - -static u8 dm646x_dit_serializer_direction[] = { - TX_MODE, -}; - -static struct snd_platform_data dm646x_evm_snd_data[] = { - { - .tx_dma_offset = 0x400, - .rx_dma_offset = 0x400, - .op_mode = DAVINCI_MCASP_IIS_MODE, - .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction), - .tdm_slots = 2, - .serial_dir = dm646x_iis_serializer_direction, - .asp_chan_q = EVENTQ_0, - }, - { - .tx_dma_offset = 0x400, - .rx_dma_offset = 0, - .op_mode = DAVINCI_MCASP_DIT_MODE, - .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction), - .tdm_slots = 32, - .serial_dir = dm646x_dit_serializer_direction, - .asp_chan_q = EVENTQ_0, - }, -}; - -#ifdef CONFIG_I2C -static struct i2c_client *cpld_client; - -static int cpld_video_probe(struct i2c_client *client) -{ - cpld_client = client; - return 0; -} - -static int cpld_video_remove(struct i2c_client *client) -{ - cpld_client = NULL; - return 0; -} - -static const struct i2c_device_id cpld_video_id[] = { - { "cpld_video", 0 }, - { } -}; - -static struct i2c_driver cpld_video_driver = { - .driver = { - .name = "cpld_video", - }, - .probe_new = cpld_video_probe, - .remove = cpld_video_remove, - .id_table = cpld_video_id, -}; - -static void evm_init_cpld(void) -{ - i2c_add_driver(&cpld_video_driver); -} - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("24c256", 0x50), - .swnode = &eeprom_node, - }, - { - I2C_BOARD_INFO("pcf8574a", 0x38), - .platform_data = &pcf_data, - }, - { - I2C_BOARD_INFO("cpld_reg0", 0x3a), - }, - { - I2C_BOARD_INFO("tlv320aic33", 0x18), - }, - { - I2C_BOARD_INFO("cpld_video", 0x3b), - }, -}; - -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 100 /* kHz */, - .bus_delay = 0 /* usec */, -}; - -#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8)) -#define VCH2CLK_SYSCLK8 (BIT(9)) -#define VCH2CLK_AUXCLK (BIT(9) | BIT(8)) -#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12)) -#define VCH3CLK_SYSCLK8 (BIT(13)) -#define VCH3CLK_AUXCLK (BIT(14) | BIT(13)) - -#define VIDCH2CLK (BIT(10)) -#define VIDCH3CLK (BIT(11)) -#define VIDCH1CLK (BIT(4)) -#define TVP7002_INPUT (BIT(4)) -#define TVP5147_INPUT (~BIT(4)) -#define VPIF_INPUT_ONE_CHANNEL (BIT(5)) -#define VPIF_INPUT_TWO_CHANNEL (~BIT(5)) -#define TVP5147_CH0 "tvp514x-0" -#define TVP5147_CH1 "tvp514x-1" - -/* spin lock for updating above registers */ -static spinlock_t vpif_reg_lock; - -static int set_vpif_clock(int mux_mode, int hd) -{ - unsigned long flags; - unsigned int value; - int val = 0; - int err = 0; - - if (!cpld_client) - return -ENXIO; - - /* disable the clock */ - spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - value |= (VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - spin_unlock_irqrestore(&vpif_reg_lock, flags); - - val = i2c_smbus_read_byte(cpld_client); - if (val < 0) - return val; - - if (mux_mode == 1) - val &= ~0x40; - else - val |= 0x40; - - err = i2c_smbus_write_byte(cpld_client, val); - if (err) - return err; - - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - value &= ~(VCH2CLK_MASK); - value &= ~(VCH3CLK_MASK); - - if (hd >= 1) - value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8); - else - value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK); - - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - - spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - /* enable the clock */ - value &= ~(VIDCH3CLK | VIDCH2CLK); - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - spin_unlock_irqrestore(&vpif_reg_lock, flags); - - return 0; -} - -static struct vpif_subdev_info dm646x_vpif_subdev[] = { - { - .name = "adv7343", - .board_info = { - I2C_BOARD_INFO("adv7343", 0x2a), - }, - }, - { - .name = "ths7303", - .board_info = { - I2C_BOARD_INFO("ths7303", 0x2c), - }, - }, -}; - -static const struct vpif_output dm6467_ch0_outputs[] = { - { - .output = { - .index = 0, - .name = "Composite", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_STD, - .std = V4L2_STD_ALL, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_COMPOSITE_ID, - }, - { - .output = { - .index = 1, - .name = "Component", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_DV_TIMINGS, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_COMPONENT_ID, - }, - { - .output = { - .index = 2, - .name = "S-Video", - .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_STD, - .std = V4L2_STD_ALL, - }, - .subdev_name = "adv7343", - .output_route = ADV7343_SVIDEO_ID, - }, -}; - -static struct vpif_display_config dm646x_vpif_display_config = { - .set_clock = set_vpif_clock, - .subdevinfo = dm646x_vpif_subdev, - .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev), - .i2c_adapter_id = 1, - .chan_config[0] = { - .outputs = dm6467_ch0_outputs, - .output_count = ARRAY_SIZE(dm6467_ch0_outputs), - }, - .card_name = "DM646x EVM Video Display", -}; - -/** - * setup_vpif_input_path() - * @channel: channel id (0 - CH0, 1 - CH1) - * @sub_dev_name: ptr sub device name - * - * This will set vpif input to capture data from tvp514x or - * tvp7002. - */ -static int setup_vpif_input_path(int channel, const char *sub_dev_name) -{ - int err = 0; - int val; - - /* for channel 1, we don't do anything */ - if (channel != 0) - return 0; - - if (!cpld_client) - return -ENXIO; - - val = i2c_smbus_read_byte(cpld_client); - if (val < 0) - return val; - - if (!strcmp(sub_dev_name, TVP5147_CH0) || - !strcmp(sub_dev_name, TVP5147_CH1)) - val &= TVP5147_INPUT; - else - val |= TVP7002_INPUT; - - err = i2c_smbus_write_byte(cpld_client, val); - if (err) - return err; - return 0; -} - -/** - * setup_vpif_input_channel_mode() - * @mux_mode: mux mode. 0 - 1 channel or (1) - 2 channel - * - * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147) - */ -static int setup_vpif_input_channel_mode(int mux_mode) -{ - unsigned long flags; - int err = 0; - int val; - u32 value; - - if (!cpld_client) - return -ENXIO; - - val = i2c_smbus_read_byte(cpld_client); - if (val < 0) - return val; - - spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - if (mux_mode) { - val &= VPIF_INPUT_TWO_CHANNEL; - value |= VIDCH1CLK; - } else { - val |= VPIF_INPUT_ONE_CHANNEL; - value &= ~VIDCH1CLK; - } - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL)); - spin_unlock_irqrestore(&vpif_reg_lock, flags); - - err = i2c_smbus_write_byte(cpld_client, val); - if (err) - return err; - - return 0; -} - -static struct tvp514x_platform_data tvp5146_pdata = { - .clk_polarity = 0, - .hs_polarity = 1, - .vs_polarity = 1 -}; - -#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) - -static struct vpif_subdev_info vpif_capture_sdev_info[] = { - { - .name = TVP5147_CH0, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5d), - .platform_data = &tvp5146_pdata, - }, - }, - { - .name = TVP5147_CH1, - .board_info = { - I2C_BOARD_INFO("tvp5146", 0x5c), - .platform_data = &tvp5146_pdata, - }, - }, -}; - -static struct vpif_input dm6467_ch0_inputs[] = { - { - .input = { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_STD, - .std = TVP514X_STD_ALL, - }, - .subdev_name = TVP5147_CH0, - .input_route = INPUT_CVBS_VI2B, - .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -}; - -static struct vpif_input dm6467_ch1_inputs[] = { - { - .input = { - .index = 0, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .capabilities = V4L2_IN_CAP_STD, - .std = TVP514X_STD_ALL, - }, - .subdev_name = TVP5147_CH1, - .input_route = INPUT_SVIDEO_VI2C_VI1C, - .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, - }, -}; - -static struct vpif_capture_config dm646x_vpif_capture_cfg = { - .setup_input_path = setup_vpif_input_path, - .setup_input_channel_mode = setup_vpif_input_channel_mode, - .subdev_info = vpif_capture_sdev_info, - .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info), - .i2c_adapter_id = 1, - .chan_config[0] = { - .inputs = dm6467_ch0_inputs, - .input_count = ARRAY_SIZE(dm6467_ch0_inputs), - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, - }, - .chan_config[1] = { - .inputs = dm6467_ch1_inputs, - .input_count = ARRAY_SIZE(dm6467_ch1_inputs), - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, - }, - .card_name = "DM646x EVM Video Capture", -}; - -static void __init evm_init_video(void) -{ - spin_lock_init(&vpif_reg_lock); - - dm646x_setup_vpif(&dm646x_vpif_display_config, - &dm646x_vpif_capture_cfg); -} - -static void __init evm_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_add_driver(&dm6467evm_cpld_driver); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); - evm_init_cpld(); - evm_init_video(); -} -#endif - -#define DM646X_REF_FREQ 27000000 -#define DM646X_AUX_FREQ 24000000 -#define DM6467T_EVM_REF_FREQ 33000000 - -static void __init davinci_map_io(void) -{ - dm646x_init(); -} - -static void __init dm646x_evm_init_time(void) -{ - dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ); -} - -static void __init dm6467t_evm_init_time(void) -{ - dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ); -} - -#define DM646X_EVM_PHY_ID "davinci_mdio-0:01" -/* - * The following EDMA channels/slots are not being used by drivers (for - * example: Timer, GPIO, UART events etc) on dm646x, hence they are being - * reserved for codecs on the DSP side. - */ -static const s16 dm646x_dma_rsv_chans[][2] = { - /* (offset, number) */ - { 0, 4}, - {13, 3}, - {24, 4}, - {30, 2}, - {54, 3}, - {-1, -1} -}; - -static const s16 dm646x_dma_rsv_slots[][2] = { - /* (offset, number) */ - { 0, 4}, - {13, 3}, - {24, 4}, - {30, 2}, - {54, 3}, - {128, 384}, - {-1, -1} -}; - -static struct edma_rsv_info dm646x_edma_rsv[] = { - { - .rsv_chans = dm646x_dma_rsv_chans, - .rsv_slots = dm646x_dma_rsv_slots, - }, -}; - -static __init void evm_init(void) -{ - int ret; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - dm646x_register_clocks(); - - ret = dm646x_gpio_register(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - -#ifdef CONFIG_I2C - nvmem_add_cell_table(&dm646x_evm_nvmem_cell_table); - nvmem_add_cell_lookups(&dm646x_evm_nvmem_cell_lookup, 1); - evm_init_i2c(); -#endif - - davinci_serial_init(dm646x_serial_device); - dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); - dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); - - if (machine_is_davinci_dm6467tevm()) - davinci_nand_data.timing = &dm6467tevm_nandflash_timing; - - if (platform_device_register(&davinci_aemif_device)) - pr_warn("%s: Cannot register AEMIF device.\n", __func__); - - dm646x_init_edma(dm646x_edma_rsv); - - if (HAS_ATA) - davinci_init_ide(); - - soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID; -} - -MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") - .atag_offset = 0x100, - .map_io = davinci_map_io, - .init_irq = dm646x_init_irq, - .init_time = dm646x_evm_init_time, - .init_machine = evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END - -MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") - .atag_offset = 0x100, - .map_io = davinci_map_io, - .init_irq = dm646x_init_irq, - .init_time = dm6467t_evm_init_time, - .init_machine = evm_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END - diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c deleted file mode 100644 index 94be492..0000000 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Neuros Technologies OSD2 board support - * - * Modified from original 644X-EVM board support. - * 2008 (c) Neuros Technology, LLC. - * 2009 (c) Jorge Luis Zapata Muga - * 2009 (c) Andrey A. Porodko - * - * The Neuros OSD 2.0 is the hardware component of the Neuros Open - * Internet Television Platform. Hardware is very close to TI - * DM644X-EVM board. It has: - * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC, - * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video. - * Additionally realtime clock, IR remote control receiver, - * IR Blaster based on MSP430 (firmware although is different - * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive - * with PATA interface, two muxed red-green leds. - * - * For more information please refer to - * http://wiki.neurostechnology.com/index.php/OSD_2.0_HD - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "common.h" -#include "serial.h" -#include "mux.h" -#include "davinci.h" - -#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01" -#define LXT971_PHY_ID 0x001378e2 -#define LXT971_PHY_MASK 0xfffffff0 - -#define NTOSD2_AUDIOSOC_I2C_ADDR 0x18 -#define NTOSD2_MSP430_I2C_ADDR 0x59 -#define NTOSD2_MSP430_IRQ 2 - -/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA, - * 2048 blocks in the device, 64 pages per block, 2048 bytes per - * page. - */ - -#define NAND_BLOCK_SIZE SZ_128K - -static struct mtd_partition davinci_ntosd2_nandflash_partition[] = { - { - /* UBL (a few copies) plus U-Boot */ - .name = "bootloader", - .offset = 0, - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - /* U-Boot environment */ - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 1 * NAND_BLOCK_SIZE, - .mask_flags = 0, - }, { - /* Kernel */ - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - .mask_flags = 0, - }, { - /* File System */ - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - } - /* A few blocks at end hold a flash Bad Block Table. */ -}; - -static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { - .core_chipsel = 0, - .parts = davinci_ntosd2_nandflash_partition, - .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), - .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST, - .ecc_bits = 1, - .bbt_options = NAND_BBT_USE_FLASH, -}; - -static struct resource davinci_ntosd2_nandflash_resource[] = { - { - .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, - .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM644X_ASYNC_EMIF_CONTROL_BASE, - .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_ntosd2_nandflash_device = { - .name = "davinci_nand", - .id = 0, - .dev = { - .platform_data = &davinci_ntosd2_nandflash_data, - }, - .num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource), - .resource = davinci_ntosd2_nandflash_resource, -}; - -static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device davinci_fb_device = { - .name = "davincifb", - .id = -1, - .dev = { - .dma_mask = &davinci_fb_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = 0, -}; - -static const struct gpio_led ntosd2_leds[] = { - { .name = "led1_green", .gpio = 10, }, - { .name = "led1_red", .gpio = 11, }, - { .name = "led2_green", .gpio = 12, }, - { .name = "led2_red", .gpio = 13, }, -}; - -static struct gpio_led_platform_data ntosd2_leds_data = { - .num_leds = ARRAY_SIZE(ntosd2_leds), - .leds = ntosd2_leds, -}; - -static struct platform_device ntosd2_leds_dev = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ntosd2_leds_data, - }, -}; - - -static struct platform_device *davinci_ntosd2_devices[] __initdata = { - &davinci_fb_device, - &ntosd2_leds_dev, -}; - -static void __init davinci_ntosd2_map_io(void) -{ - dm644x_init(); -} - -static struct davinci_mmc_config davinci_ntosd2_mmc_config = { - .wires = 4, -}; - -#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - IS_ENABLED(CONFIG_PATA_BK3710)) - -#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) - -static __init void davinci_ntosd2_init(void) -{ - int ret; - struct clk *aemif_clk; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - dm644x_register_clocks(); - - dm644x_init_devices(); - - ret = dm644x_gpio_register(); - if (ret) - pr_warn("%s: GPIO init failed: %d\n", __func__, ret); - - aemif_clk = clk_get(NULL, "aemif"); - clk_prepare_enable(aemif_clk); - - if (HAS_ATA) { - if (HAS_NAND) - pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n" - "\tDisable IDE for NAND/NOR support\n"); - davinci_init_ide(); - } else if (HAS_NAND) { - davinci_cfg_reg(DM644X_HPIEN_DISABLE); - davinci_cfg_reg(DM644X_ATAEN_DISABLE); - - /* only one device will be jumpered and detected */ - if (HAS_NAND) - platform_device_register( - &davinci_ntosd2_nandflash_device); - } - - platform_add_devices(davinci_ntosd2_devices, - ARRAY_SIZE(davinci_ntosd2_devices)); - - davinci_serial_init(dm644x_serial_device); - dm644x_init_asp(); - - soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID; - - davinci_setup_usb(1000, 8); - /* - * Mux the pins to be GPIOs, VLYNQEN is already done at startup. - * The AEAWx are five new AEAW pins that can be muxed by separately. - * They are a bitmask for GPIO management. According TI - * documentation (https://www.ti.com/lit/gpn/tms320dm6446) to employ - * gpio(10,11,12,13) for leds any combination of bits works except - * four last. So we are to reset all five. - */ - davinci_cfg_reg(DM644X_AEAW0); - davinci_cfg_reg(DM644X_AEAW1); - davinci_cfg_reg(DM644X_AEAW2); - davinci_cfg_reg(DM644X_AEAW3); - davinci_cfg_reg(DM644X_AEAW4); - - davinci_setup_mmc(0, &davinci_ntosd2_mmc_config); -} - -MACHINE_START(NEUROS_OSD2, "Neuros OSD2") - /* Maintainer: Neuros Technologies */ - .atag_offset = 0x100, - .map_io = davinci_ntosd2_map_io, - .init_irq = dm644x_init_irq, - .init_time = dm644x_init_time, - .init_machine = davinci_ntosd2_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c deleted file mode 100644 index e87fd8f..0000000 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Lyrtech SFFSDR board support. - * - * Copyright (C) 2008 Philip Balister, OpenSDR - * Copyright (C) 2008 Lyrtech - * - * Based on DV-EVM platform, original copyright follows: - * - * Copyright (C) 2007 MontaVista Software, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "common.h" -#include "serial.h" -#include "mux.h" -#include "davinci.h" - -#define SFFSDR_PHY_ID "davinci_mdio-0:01" -static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { - /* U-Boot Environment: Block 0 - * UBL: Block 1 - * U-Boot: Blocks 6-7 (256 kb) - * Integrity Kernel: Blocks 8-31 (3 Mb) - * Integrity Data: Blocks 100-END - */ - { - .name = "Linux Kernel", - .offset = 32 * SZ_128K, - .size = 16 * SZ_128K, /* 2 Mb */ - .mask_flags = MTD_WRITEABLE, /* Force read-only */ - }, - { - .name = "Linux ROOT", - .offset = MTDPART_OFS_APPEND, - .size = 256 * SZ_128K, /* 32 Mb */ - .mask_flags = 0, /* R/W */ - }, -}; - -static struct flash_platform_data davinci_sffsdr_nandflash_data = { - .parts = davinci_sffsdr_nandflash_partition, - .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition), -}; - -static struct resource davinci_sffsdr_nandflash_resource[] = { - { - .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE, - .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, { - .start = DM644X_ASYNC_EMIF_CONTROL_BASE, - .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device davinci_sffsdr_nandflash_device = { - .name = "davinci_nand", /* Name of driver */ - .id = 0, - .dev = { - .platform_data = &davinci_sffsdr_nandflash_data, - }, - .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource), - .resource = davinci_sffsdr_nandflash_resource, -}; - -static const struct property_entry eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 32), - { } -}; - -static const struct software_node eeprom_node = { - .properties = eeprom_properties, -}; - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("24c64", 0x50), - .swnode = &eeprom_node, - }, - /* Other I2C devices: - * MSP430, addr 0x23 (not used) - * PCA9543, addr 0x70 (setup done by U-Boot) - * ADS7828, addr 0x48 (ADC for voltage monitoring.) - */ -}; - -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static void __init sffsdr_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); -} - -static struct platform_device *davinci_sffsdr_devices[] __initdata = { - &davinci_sffsdr_nandflash_device, -}; - -static void __init davinci_sffsdr_map_io(void) -{ - dm644x_init(); -} - -static __init void davinci_sffsdr_init(void) -{ - struct davinci_soc_info *soc_info = &davinci_soc_info; - - dm644x_register_clocks(); - - dm644x_init_devices(); - - platform_add_devices(davinci_sffsdr_devices, - ARRAY_SIZE(davinci_sffsdr_devices)); - sffsdr_init_i2c(); - davinci_serial_init(dm644x_serial_device); - soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID; - davinci_setup_usb(0, 0); /* We support only peripheral mode. */ - - /* mux VLYNQ pins */ - davinci_cfg_reg(DM644X_VLYNQEN); - davinci_cfg_reg(DM644X_VLYNQWD); -} - -MACHINE_START(SFFSDR, "Lyrtech SFFSDR") - .atag_offset = 0x100, - .map_io = davinci_sffsdr_map_io, - .init_irq = dm644x_init_irq, - .init_time = dm644x_init_time, - .init_machine = davinci_sffsdr_init, - .init_late = davinci_init_late, - .dma_zone_size = SZ_128M, -MACHINE_END diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c deleted file mode 100644 index 1ce48d0..0000000 --- a/arch/arm/mach-davinci/dm644x.c +++ /dev/null @@ -1,765 +0,0 @@ -/* - * TI DaVinci DM644x chip specific setup - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include "common.h" -#include "cputype.h" -#include "serial.h" -#include "asp.h" -#include "davinci.h" -#include "irqs.h" -#include "mux.h" - -/* - * Device specific clocks - */ -#define DM644X_REF_FREQ 27000000 - -#define DM644X_EMAC_BASE 0x01c80000 -#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) -#define DM644X_EMAC_CNTRL_OFFSET 0x0000 -#define DM644X_EMAC_CNTRL_MOD_OFFSET 0x1000 -#define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000 -#define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000 - -static struct emac_platform_data dm644x_emac_pdata = { - .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, - .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, - .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, - .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, - .version = EMAC_VERSION_1, -}; - -static struct resource dm644x_emac_resources[] = { - { - .start = DM644X_EMAC_BASE, - .end = DM644X_EMAC_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_EMACINT), - .end = DAVINCI_INTC_IRQ(IRQ_EMACINT), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm644x_emac_device = { - .name = "davinci_emac", - .id = 1, - .dev = { - .platform_data = &dm644x_emac_pdata, - }, - .num_resources = ARRAY_SIZE(dm644x_emac_resources), - .resource = dm644x_emac_resources, -}; - -static struct resource dm644x_mdio_resources[] = { - { - .start = DM644X_EMAC_MDIO_BASE, - .end = DM644X_EMAC_MDIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm644x_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(dm644x_mdio_resources), - .resource = dm644x_mdio_resources, -}; - -/* - * Device specific mux setup - * - * soc description mux mode mode mux dbg - * reg offset mask mode - */ -static const struct mux_config dm644x_pins[] = { -#ifdef CONFIG_DAVINCI_MUX -MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) -MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) -MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) - -MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) - -MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) -MUX_CFG(DM644X, AEAW0, 0, 0, 1, 0, true) -MUX_CFG(DM644X, AEAW1, 0, 1, 1, 0, true) -MUX_CFG(DM644X, AEAW2, 0, 2, 1, 0, true) -MUX_CFG(DM644X, AEAW3, 0, 3, 1, 0, true) -MUX_CFG(DM644X, AEAW4, 0, 4, 1, 0, true) - -MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) - -MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) - -MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) - -MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) -MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) - -MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) - -MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) - -MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) - -MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) -MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) -MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) - -MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) - -MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) - -MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) -MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) -MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) -MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) - -MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) - -MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) -MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) -#endif -}; - -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_VDINT0] = 2, - [IRQ_VDINT1] = 6, - [IRQ_VDINT2] = 6, - [IRQ_HISTINT] = 6, - [IRQ_H3AINT] = 6, - [IRQ_PRVUINT] = 6, - [IRQ_RSZINT] = 6, - [7] = 7, - [IRQ_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_VLCDINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_EMACINT] = 4, - [14] = 7, - [15] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_PSCIN] = 7, - [21] = 7, - [IRQ_IDE] = 4, - [23] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_SDIOINT] = 7, - [28] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_VLQINT] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_UARTINT2] = 3, - [IRQ_SPINT0] = 3, - [IRQ_SPINT1] = 3, - [45] = 7, - [IRQ_DSP2ARM0] = 4, - [IRQ_DSP2ARM1] = 4, - [IRQ_GPIO0] = 7, - [IRQ_GPIO1] = 7, - [IRQ_GPIO2] = 7, - [IRQ_GPIO3] = 7, - [IRQ_GPIO4] = 7, - [IRQ_GPIO5] = 7, - [IRQ_GPIO6] = 7, - [IRQ_GPIO7] = 7, - [IRQ_GPIOBNK0] = 7, - [IRQ_GPIOBNK1] = 7, - [IRQ_GPIOBNK2] = 7, - [IRQ_GPIOBNK3] = 7, - [IRQ_GPIOBNK4] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -/*----------------------------------------------------------------------*/ - -static s8 queue_priority_mapping[][2] = { - /* {event queue no, Priority} */ - {0, 3}, - {1, 7}, - {-1, -1}, -}; - -static const struct dma_slave_map dm644x_edma_map[] = { - { "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) }, - { "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) }, - { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, - { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, - { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, - { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, -}; - -static struct edma_soc_info dm644x_edma_pdata = { - .queue_priority_mapping = queue_priority_mapping, - .default_queue = EVENTQ_1, - .slave_map = dm644x_edma_map, - .slavecnt = ARRAY_SIZE(dm644x_edma_map), -}; - -static struct resource edma_resources[] = { - { - .name = "edma3_cc", - .start = 0x01c00000, - .end = 0x01c00000 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc0", - .start = 0x01c10000, - .end = 0x01c10000 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc1", - .start = 0x01c10400, - .end = 0x01c10400 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_ccint", - .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma3_ccerrint", - .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), - .flags = IORESOURCE_IRQ, - }, - /* not using TC*_ERR */ -}; - -static const struct platform_device_info dm644x_edma_device __initconst = { - .name = "edma", - .id = 0, - .dma_mask = DMA_BIT_MASK(32), - .res = edma_resources, - .num_res = ARRAY_SIZE(edma_resources), - .data = &dm644x_edma_pdata, - .size_data = sizeof(dm644x_edma_pdata), -}; - -/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ -static struct resource dm644x_asp_resources[] = { - { - .name = "mpu", - .start = DAVINCI_ASP0_BASE, - .end = DAVINCI_ASP0_BASE + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_DMA_ASP0_TX, - .end = DAVINCI_DMA_ASP0_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = DAVINCI_DMA_ASP0_RX, - .end = DAVINCI_DMA_ASP0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device dm644x_asp_device = { - .name = "davinci-mcbsp", - .id = -1, - .num_resources = ARRAY_SIZE(dm644x_asp_resources), - .resource = dm644x_asp_resources, -}; - -#define DM644X_VPSS_BASE 0x01c73400 - -static struct resource dm644x_vpss_resources[] = { - { - /* VPSS Base address */ - .name = "vpss", - .start = DM644X_VPSS_BASE, - .end = DM644X_VPSS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm644x_vpss_device = { - .name = "vpss", - .id = -1, - .dev.platform_data = "dm644x_vpss", - .num_resources = ARRAY_SIZE(dm644x_vpss_resources), - .resource = dm644x_vpss_resources, -}; - -static struct resource dm644x_vpfe_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VDINT0), - .end = DAVINCI_INTC_IRQ(IRQ_VDINT0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_VDINT1), - .end = DAVINCI_INTC_IRQ(IRQ_VDINT1), - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32); -static struct resource dm644x_ccdc_resource[] = { - /* CCDC Base address */ - { - .start = 0x01c70400, - .end = 0x01c70400 + 0xff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm644x_ccdc_dev = { - .name = "dm644x_ccdc", - .id = -1, - .num_resources = ARRAY_SIZE(dm644x_ccdc_resource), - .resource = dm644x_ccdc_resource, - .dev = { - .dma_mask = &dm644x_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct platform_device dm644x_vpfe_dev = { - .name = CAPTURE_DRV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(dm644x_vpfe_resources), - .resource = dm644x_vpfe_resources, - .dev = { - .dma_mask = &dm644x_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#define DM644X_OSD_BASE 0x01c72600 - -static struct resource dm644x_osd_resources[] = { - { - .start = DM644X_OSD_BASE, - .end = DM644X_OSD_BASE + 0x1ff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm644x_osd_dev = { - .name = DM644X_VPBE_OSD_SUBDEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(dm644x_osd_resources), - .resource = dm644x_osd_resources, - .dev = { - .dma_mask = &dm644x_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#define DM644X_VENC_BASE 0x01c72400 - -static struct resource dm644x_venc_resources[] = { - { - .start = DM644X_VENC_BASE, - .end = DM644X_VENC_BASE + 0x17f, - .flags = IORESOURCE_MEM, - }, -}; - -#define DM644X_VPSS_MUXSEL_PLL2_MODE BIT(0) -#define DM644X_VPSS_MUXSEL_VPBECLK_MODE BIT(1) -#define DM644X_VPSS_VENCLKEN BIT(3) -#define DM644X_VPSS_DACCLKEN BIT(4) - -static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, - unsigned int pclock) -{ - int ret = 0; - u32 v = DM644X_VPSS_VENCLKEN; - - switch (type) { - case VPBE_ENC_STD: - v |= DM644X_VPSS_DACCLKEN; - writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); - break; - case VPBE_ENC_DV_TIMINGS: - if (pclock <= 27000000) { - v |= DM644X_VPSS_DACCLKEN; - writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); - } else { - /* - * For HD, use external clock source since - * HD requires higher clock rate - */ - v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE; - writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); - } - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static struct resource dm644x_v4l2_disp_resources[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .end = DAVINCI_INTC_IRQ(IRQ_VENCINT), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm644x_vpbe_display = { - .name = "vpbe-v4l2", - .id = -1, - .num_resources = ARRAY_SIZE(dm644x_v4l2_disp_resources), - .resource = dm644x_v4l2_disp_resources, - .dev = { - .dma_mask = &dm644x_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct venc_platform_data dm644x_venc_pdata = { - .setup_clock = dm644x_venc_setup_clock, -}; - -static struct platform_device dm644x_venc_dev = { - .name = DM644X_VPBE_VENC_SUBDEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(dm644x_venc_resources), - .resource = dm644x_venc_resources, - .dev = { - .dma_mask = &dm644x_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dm644x_venc_pdata, - }, -}; - -static struct platform_device dm644x_vpbe_dev = { - .name = "vpbe_controller", - .id = -1, - .dev = { - .dma_mask = &dm644x_video_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static struct resource dm644_gpio_resources[] = { - { /* registers */ - .start = DAVINCI_GPIO_BASE, - .end = DAVINCI_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* interrupt */ - .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK0), - .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK1), - .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK1), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK2), - .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK2), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK3), - .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK3), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_GPIOBNK4), - .end = DAVINCI_INTC_IRQ(IRQ_GPIOBNK4), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct davinci_gpio_platform_data dm644_gpio_platform_data = { - .no_auto_base = true, - .base = 0, - .ngpio = 71, -}; - -int __init dm644x_gpio_register(void) -{ - return davinci_gpio_register(dm644_gpio_resources, - ARRAY_SIZE(dm644_gpio_resources), - &dm644_gpio_platform_data); -} -/*----------------------------------------------------------------------*/ - -static struct map_desc dm644x_io_desc[] = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -/* Contents of JTAG ID register used to identify exact cpu type */ -static struct davinci_id dm644x_ids[] = { - { - .variant = 0x0, - .part_no = 0xb700, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_DM6446, - .name = "dm6446", - }, - { - .variant = 0x1, - .part_no = 0xb700, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_DM6446, - .name = "dm6446a", - }, -}; - -/* - * Bottom half of timer0 is used for clockevent, top half is used for - * clocksource. - */ -static const struct davinci_timer_cfg dm644x_timer_cfg = { - .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K), - .irq = { - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)), - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)), - }, -}; - -static struct plat_serial8250_port dm644x_serial0_platform_data[] = { - { - .mapbase = DAVINCI_UART0_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port dm644x_serial1_platform_data[] = { - { - .mapbase = DAVINCI_UART1_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port dm644x_serial2_platform_data[] = { - { - .mapbase = DAVINCI_UART2_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT2), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0, - } -}; - -struct platform_device dm644x_serial_device[] = { - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm644x_serial0_platform_data, - } - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = dm644x_serial1_platform_data, - } - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = dm644x_serial2_platform_data, - } - }, - { - } -}; - -static const struct davinci_soc_info davinci_soc_info_dm644x = { - .io_desc = dm644x_io_desc, - .io_desc_num = ARRAY_SIZE(dm644x_io_desc), - .jtag_id_reg = 0x01c40028, - .ids = dm644x_ids, - .ids_num = ARRAY_SIZE(dm644x_ids), - .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, - .pinmux_pins = dm644x_pins, - .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), - .emac_pdata = &dm644x_emac_pdata, - .sram_dma = 0x00008000, - .sram_len = SZ_16K, -}; - -void __init dm644x_init_asp(void) -{ - davinci_cfg_reg(DM644X_MCBSP); - platform_device_register(&dm644x_asp_device); -} - -void __init dm644x_init(void) -{ - davinci_common_init(&davinci_soc_info_dm644x); - davinci_map_sysmod(); -} - -void __init dm644x_init_time(void) -{ - void __iomem *pll1, *psc; - struct clk *clk; - int rv; - - clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ); - - pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); - dm644x_pll1_init(NULL, pll1, NULL); - - psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); - dm644x_psc_init(NULL, psc); - - clk = clk_get(NULL, "timer0"); - if (WARN_ON(IS_ERR(clk))) { - pr_err("Unable to get the timer clock\n"); - return; - } - - rv = davinci_timer_register(clk, &dm644x_timer_cfg); - WARN(rv, "Unable to register the timer: %d\n", rv); -} - -static struct resource dm644x_pll2_resources[] = { - { - .start = DAVINCI_PLL2_BASE, - .end = DAVINCI_PLL2_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm644x_pll2_device = { - .name = "dm644x-pll2", - .id = -1, - .resource = dm644x_pll2_resources, - .num_resources = ARRAY_SIZE(dm644x_pll2_resources), -}; - -void __init dm644x_register_clocks(void) -{ - /* PLL1 and PSC are registered in dm644x_init_time() */ - platform_device_register(&dm644x_pll2_device); -} - -int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, - struct vpbe_config *vpbe_cfg) -{ - if (vpfe_cfg || vpbe_cfg) - platform_device_register(&dm644x_vpss_device); - - if (vpfe_cfg) { - dm644x_vpfe_dev.dev.platform_data = vpfe_cfg; - platform_device_register(&dm644x_ccdc_dev); - platform_device_register(&dm644x_vpfe_dev); - } - - if (vpbe_cfg) { - dm644x_vpbe_dev.dev.platform_data = vpbe_cfg; - platform_device_register(&dm644x_osd_dev); - platform_device_register(&dm644x_venc_dev); - platform_device_register(&dm644x_vpbe_dev); - platform_device_register(&dm644x_vpbe_display); - } - - return 0; -} - -static const struct davinci_aintc_config dm644x_aintc_config = { - .reg = { - .start = DAVINCI_ARM_INTC_BASE, - .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .num_irqs = 64, - .prios = dm644x_default_priorities, -}; - -void __init dm644x_init_irq(void) -{ - davinci_aintc_init(&dm644x_aintc_config); -} - -void __init dm644x_init_devices(void) -{ - struct platform_device *edma_pdev; - int ret; - - edma_pdev = platform_device_register_full(&dm644x_edma_device); - if (IS_ERR(edma_pdev)) - pr_warn("%s: Failed to register eDMA\n", __func__); - - platform_device_register(&dm644x_mdio_device); - platform_device_register(&dm644x_emac_device); - - ret = davinci_init_wdt(); - if (ret) - pr_warn("%s: watchdog init failed: %d\n", __func__, ret); - -} diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c deleted file mode 100644 index 971b2d4..0000000 --- a/arch/arm/mach-davinci/dm646x.c +++ /dev/null @@ -1,726 +0,0 @@ -/* - * TI DaVinci DM646x chip specific setup - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include "common.h" -#include "cputype.h" -#include "serial.h" -#include "asp.h" -#include "davinci.h" -#include "irqs.h" -#include "mux.h" - -#define DAVINCI_VPIF_BASE (0x01C12000) - -#define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\ - BIT_MASK(0)) -#define VSCLKDIS_MASK (BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\ - BIT_MASK(8)) - -#define DM646X_EMAC_BASE 0x01c80000 -#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) -#define DM646X_EMAC_CNTRL_OFFSET 0x0000 -#define DM646X_EMAC_CNTRL_MOD_OFFSET 0x1000 -#define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000 -#define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000 - -static struct emac_platform_data dm646x_emac_pdata = { - .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, - .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, - .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, - .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, - .version = EMAC_VERSION_2, -}; - -static struct resource dm646x_emac_resources[] = { - { - .start = DM646X_EMAC_BASE, - .end = DM646X_EMAC_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm646x_emac_device = { - .name = "davinci_emac", - .id = 1, - .dev = { - .platform_data = &dm646x_emac_pdata, - }, - .num_resources = ARRAY_SIZE(dm646x_emac_resources), - .resource = dm646x_emac_resources, -}; - -static struct resource dm646x_mdio_resources[] = { - { - .start = DM646X_EMAC_MDIO_BASE, - .end = DM646X_EMAC_MDIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm646x_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(dm646x_mdio_resources), - .resource = dm646x_mdio_resources, -}; - -/* - * Device specific mux setup - * - * soc description mux mode mode mux dbg - * reg offset mask mode - */ -static const struct mux_config dm646x_pins[] = { -#ifdef CONFIG_DAVINCI_MUX -MUX_CFG(DM646X, ATAEN, 0, 0, 5, 1, true) - -MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false) - -MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false) - -MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true) - -MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true) - -MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true) - -MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true) - -MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true) - -MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true) - -MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true) - -MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true) - -MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true) - -MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true) - -MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true) -#endif -}; - -static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM646X_VP_VERTINT0] = 7, - [IRQ_DM646X_VP_VERTINT1] = 7, - [IRQ_DM646X_VP_VERTINT2] = 7, - [IRQ_DM646X_VP_VERTINT3] = 7, - [IRQ_DM646X_VP_ERRINT] = 7, - [IRQ_DM646X_RESERVED_1] = 7, - [IRQ_DM646X_RESERVED_2] = 7, - [IRQ_DM646X_WDINT] = 7, - [IRQ_DM646X_CRGENINT0] = 7, - [IRQ_DM646X_CRGENINT1] = 7, - [IRQ_DM646X_TSIFINT0] = 7, - [IRQ_DM646X_TSIFINT1] = 7, - [IRQ_DM646X_VDCEINT] = 7, - [IRQ_DM646X_USBINT] = 7, - [IRQ_DM646X_USBDMAINT] = 7, - [IRQ_DM646X_PCIINT] = 7, - [IRQ_CCINT0] = 7, /* dma */ - [IRQ_CCERRINT] = 7, /* dma */ - [IRQ_TCERRINT0] = 7, /* dma */ - [IRQ_TCERRINT] = 7, /* dma */ - [IRQ_DM646X_TCERRINT2] = 7, - [IRQ_DM646X_TCERRINT3] = 7, - [IRQ_DM646X_IDE] = 7, - [IRQ_DM646X_HPIINT] = 7, - [IRQ_DM646X_EMACRXTHINT] = 7, - [IRQ_DM646X_EMACRXINT] = 7, - [IRQ_DM646X_EMACTXINT] = 7, - [IRQ_DM646X_EMACMISCINT] = 7, - [IRQ_DM646X_MCASP0TXINT] = 7, - [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_DM646X_RESERVED_3] = 7, - [IRQ_DM646X_MCASP1TXINT] = 7, - [IRQ_TINT0_TINT12] = 7, /* clockevent */ - [IRQ_TINT0_TINT34] = 7, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_DM646X_VLQINT] = 7, - [IRQ_I2C] = 7, - [IRQ_UARTINT0] = 7, - [IRQ_UARTINT1] = 7, - [IRQ_DM646X_UARTINT2] = 7, - [IRQ_DM646X_SPINT0] = 7, - [IRQ_DM646X_SPINT1] = 7, - [IRQ_DM646X_DSP2ARMINT] = 7, - [IRQ_DM646X_RESERVED_4] = 7, - [IRQ_DM646X_PSCINT] = 7, - [IRQ_DM646X_GPIO0] = 7, - [IRQ_DM646X_GPIO1] = 7, - [IRQ_DM646X_GPIO2] = 7, - [IRQ_DM646X_GPIO3] = 7, - [IRQ_DM646X_GPIO4] = 7, - [IRQ_DM646X_GPIO5] = 7, - [IRQ_DM646X_GPIO6] = 7, - [IRQ_DM646X_GPIO7] = 7, - [IRQ_DM646X_GPIOBNK0] = 7, - [IRQ_DM646X_GPIOBNK1] = 7, - [IRQ_DM646X_GPIOBNK2] = 7, - [IRQ_DM646X_DDRINT] = 7, - [IRQ_DM646X_AEMIFINT] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -/*----------------------------------------------------------------------*/ - -/* Four Transfer Controllers on DM646x */ -static s8 dm646x_queue_priority_mapping[][2] = { - /* {event queue no, Priority} */ - {0, 4}, - {1, 0}, - {2, 5}, - {3, 1}, - {-1, -1}, -}; - -static const struct dma_slave_map dm646x_edma_map[] = { - { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) }, - { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) }, - { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) }, - { "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) }, - { "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) }, -}; - -static struct edma_soc_info dm646x_edma_pdata = { - .queue_priority_mapping = dm646x_queue_priority_mapping, - .default_queue = EVENTQ_1, - .slave_map = dm646x_edma_map, - .slavecnt = ARRAY_SIZE(dm646x_edma_map), -}; - -static struct resource edma_resources[] = { - { - .name = "edma3_cc", - .start = 0x01c00000, - .end = 0x01c00000 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc0", - .start = 0x01c10000, - .end = 0x01c10000 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc1", - .start = 0x01c10400, - .end = 0x01c10400 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc2", - .start = 0x01c10800, - .end = 0x01c10800 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_tc3", - .start = 0x01c10c00, - .end = 0x01c10c00 + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "edma3_ccint", - .start = DAVINCI_INTC_IRQ(IRQ_CCINT0), - .flags = IORESOURCE_IRQ, - }, - { - .name = "edma3_ccerrint", - .start = DAVINCI_INTC_IRQ(IRQ_CCERRINT), - .flags = IORESOURCE_IRQ, - }, - /* not using TC*_ERR */ -}; - -static const struct platform_device_info dm646x_edma_device __initconst = { - .name = "edma", - .id = 0, - .dma_mask = DMA_BIT_MASK(32), - .res = edma_resources, - .num_res = ARRAY_SIZE(edma_resources), - .data = &dm646x_edma_pdata, - .size_data = sizeof(dm646x_edma_pdata), -}; - -static struct resource dm646x_mcasp0_resources[] = { - { - .name = "mpu", - .start = DAVINCI_DM646X_MCASP0_REG_BASE, - .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, - .end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, - .flags = IORESOURCE_DMA, - }, - { - .name = "rx", - .start = DAVINCI_DM646X_DMA_MCASP0_AREVT0, - .end = DAVINCI_DM646X_DMA_MCASP0_AREVT0, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0TXINT), - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0RXINT), - .flags = IORESOURCE_IRQ, - }, -}; - -/* DIT mode only, rx is not supported */ -static struct resource dm646x_mcasp1_resources[] = { - { - .name = "mpu", - .start = DAVINCI_DM646X_MCASP1_REG_BASE, - .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, - .end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, - .flags = IORESOURCE_DMA, - }, - { - .name = "tx", - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP1TXINT), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device dm646x_mcasp0_device = { - .name = "davinci-mcasp", - .id = 0, - .num_resources = ARRAY_SIZE(dm646x_mcasp0_resources), - .resource = dm646x_mcasp0_resources, -}; - -static struct platform_device dm646x_mcasp1_device = { - .name = "davinci-mcasp", - .id = 1, - .num_resources = ARRAY_SIZE(dm646x_mcasp1_resources), - .resource = dm646x_mcasp1_resources, -}; - -static struct platform_device dm646x_dit_device = { - .name = "spdif-dit", - .id = -1, -}; - -static u64 vpif_dma_mask = DMA_BIT_MASK(32); - -static struct resource vpif_resource[] = { - { - .start = DAVINCI_VPIF_BASE, - .end = DAVINCI_VPIF_BASE + 0x03ff, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device vpif_dev = { - .name = "vpif", - .id = -1, - .dev = { - .dma_mask = &vpif_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = vpif_resource, - .num_resources = ARRAY_SIZE(vpif_resource), -}; - -static struct resource vpif_display_resource[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device vpif_display_dev = { - .name = "vpif_display", - .id = -1, - .dev = { - .dma_mask = &vpif_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = vpif_display_resource, - .num_resources = ARRAY_SIZE(vpif_display_resource), -}; - -static struct resource vpif_capture_resource[] = { - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device vpif_capture_dev = { - .name = "vpif_capture", - .id = -1, - .dev = { - .dma_mask = &vpif_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = vpif_capture_resource, - .num_resources = ARRAY_SIZE(vpif_capture_resource), -}; - -static struct resource dm646x_gpio_resources[] = { - { /* registers */ - .start = DAVINCI_GPIO_BASE, - .end = DAVINCI_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* interrupt */ - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1), - .flags = IORESOURCE_IRQ, - }, - { - .start = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2), - .end = DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { - .no_auto_base = true, - .base = 0, - .ngpio = 43, -}; - -int __init dm646x_gpio_register(void) -{ - return davinci_gpio_register(dm646x_gpio_resources, - ARRAY_SIZE(dm646x_gpio_resources), - &dm646x_gpio_platform_data); -} -/*----------------------------------------------------------------------*/ - -static struct map_desc dm646x_io_desc[] = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -/* Contents of JTAG ID register used to identify exact cpu type */ -static struct davinci_id dm646x_ids[] = { - { - .variant = 0x0, - .part_no = 0xb770, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_DM6467, - .name = "dm6467_rev1.x", - }, - { - .variant = 0x1, - .part_no = 0xb770, - .manufacturer = 0x017, - .cpu_id = DAVINCI_CPU_ID_DM6467, - .name = "dm6467_rev3.x", - }, -}; - -/* - * Bottom half of timer0 is used for clockevent, top half is used for - * clocksource. - */ -static const struct davinci_timer_cfg dm646x_timer_cfg = { - .reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K), - .irq = { - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)), - DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)), - }, -}; - -static struct plat_serial8250_port dm646x_serial0_platform_data[] = { - { - .mapbase = DAVINCI_UART0_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT0), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM32, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port dm646x_serial1_platform_data[] = { - { - .mapbase = DAVINCI_UART1_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_UARTINT1), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM32, - .regshift = 2, - }, - { - .flags = 0, - } -}; -static struct plat_serial8250_port dm646x_serial2_platform_data[] = { - { - .mapbase = DAVINCI_UART2_BASE, - .irq = DAVINCI_INTC_IRQ(IRQ_DM646X_UARTINT2), - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM32, - .regshift = 2, - }, - { - .flags = 0, - } -}; - -struct platform_device dm646x_serial_device[] = { - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = dm646x_serial0_platform_data, - } - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = dm646x_serial1_platform_data, - } - }, - { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = dm646x_serial2_platform_data, - } - }, - { - } -}; - -static const struct davinci_soc_info davinci_soc_info_dm646x = { - .io_desc = dm646x_io_desc, - .io_desc_num = ARRAY_SIZE(dm646x_io_desc), - .jtag_id_reg = 0x01c40028, - .ids = dm646x_ids, - .ids_num = ARRAY_SIZE(dm646x_ids), - .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, - .pinmux_pins = dm646x_pins, - .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), - .emac_pdata = &dm646x_emac_pdata, - .sram_dma = 0x10010000, - .sram_len = SZ_32K, -}; - -void __init dm646x_init_mcasp0(struct snd_platform_data *pdata) -{ - dm646x_mcasp0_device.dev.platform_data = pdata; - platform_device_register(&dm646x_mcasp0_device); -} - -void __init dm646x_init_mcasp1(struct snd_platform_data *pdata) -{ - dm646x_mcasp1_device.dev.platform_data = pdata; - platform_device_register(&dm646x_mcasp1_device); - platform_device_register(&dm646x_dit_device); -} - -void dm646x_setup_vpif(struct vpif_display_config *display_config, - struct vpif_capture_config *capture_config) -{ - unsigned int value; - - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - value &= ~VSCLKDIS_MASK; - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS)); - - value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); - value &= ~VDD3P3V_VID_MASK; - __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN)); - - davinci_cfg_reg(DM646X_STSOMUX_DISABLE); - davinci_cfg_reg(DM646X_STSIMUX_DISABLE); - davinci_cfg_reg(DM646X_PTSOMUX_DISABLE); - davinci_cfg_reg(DM646X_PTSIMUX_DISABLE); - - vpif_display_dev.dev.platform_data = display_config; - vpif_capture_dev.dev.platform_data = capture_config; - platform_device_register(&vpif_dev); - platform_device_register(&vpif_display_dev); - platform_device_register(&vpif_capture_dev); -} - -int __init dm646x_init_edma(struct edma_rsv_info *rsv) -{ - struct platform_device *edma_pdev; - - dm646x_edma_pdata.rsv = rsv; - - edma_pdev = platform_device_register_full(&dm646x_edma_device); - return PTR_ERR_OR_ZERO(edma_pdev); -} - -void __init dm646x_init(void) -{ - davinci_common_init(&davinci_soc_info_dm646x); - davinci_map_sysmod(); -} - -void __init dm646x_init_time(unsigned long ref_clk_rate, - unsigned long aux_clkin_rate) -{ - void __iomem *pll1, *psc; - struct clk *clk; - int rv; - - clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate); - clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate); - - pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); - dm646x_pll1_init(NULL, pll1, NULL); - - psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); - dm646x_psc_init(NULL, psc); - - clk = clk_get(NULL, "timer0"); - if (WARN_ON(IS_ERR(clk))) { - pr_err("Unable to get the timer clock\n"); - return; - } - - rv = davinci_timer_register(clk, &dm646x_timer_cfg); - WARN(rv, "Unable to register the timer: %d\n", rv); -} - -static struct resource dm646x_pll2_resources[] = { - { - .start = DAVINCI_PLL2_BASE, - .end = DAVINCI_PLL2_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device dm646x_pll2_device = { - .name = "dm646x-pll2", - .id = -1, - .resource = dm646x_pll2_resources, - .num_resources = ARRAY_SIZE(dm646x_pll2_resources), -}; - -void __init dm646x_register_clocks(void) -{ - /* PLL1 and PSC are registered in dm646x_init_time() */ - platform_device_register(&dm646x_pll2_device); -} - -static const struct davinci_aintc_config dm646x_aintc_config = { - .reg = { - .start = DAVINCI_ARM_INTC_BASE, - .end = DAVINCI_ARM_INTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .num_irqs = 64, - .prios = dm646x_default_priorities, -}; - -void __init dm646x_init_irq(void) -{ - davinci_aintc_init(&dm646x_aintc_config); -} - -static int __init dm646x_init_devices(void) -{ - int ret = 0; - - if (!cpu_is_davinci_dm646x()) - return 0; - - platform_device_register(&dm646x_mdio_device); - platform_device_register(&dm646x_emac_device); - - ret = davinci_init_wdt(); - if (ret) - pr_warn("%s: watchdog init failed: %d\n", __func__, ret); - - return ret; -} -postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index c30c69c..2252f46 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 menuconfig ARCH_DOVE bool "Marvell Dove" if ARCH_MULTI_V7 + depends on ATAGS select CPU_PJ4 select GPIOLIB select MVEBU_MBUS @@ -8,6 +9,7 @@ menuconfig ARCH_DOVE select PINCTRL_DOVE select PLAT_ORION_LEGACY select PM_GENERIC_DOMAINS if PM + select PCI_QUIRKS if PCI help Support for the Marvell Dove SoC 88AP510 diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 2a493bd..f90f42f 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -136,14 +136,19 @@ static struct pci_ops pcie_ops = { .write = pcie_wr_conf, }; +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 21f4cc2..2c40996 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_EP93XX bool "EP93xx-based" + depends on ATAGS depends on ARCH_MULTI_V4T depends on CPU_LITTLE_ENDIAN select ARCH_SPARSEMEM_ENABLE @@ -26,6 +27,7 @@ comment "EP93xx Platforms" config MACH_ADSSPHERE bool "Support ADS Sphere" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the ADS Sphere board. @@ -98,6 +100,7 @@ config MACH_EDB9315A config MACH_GESBC9312 bool "Support Glomation GESBC-9312-sx" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board. @@ -108,6 +111,7 @@ config MACH_MICRO9 config MACH_MICRO9H bool "Support Contec Micro9-High" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-High board. @@ -115,6 +119,7 @@ config MACH_MICRO9H config MACH_MICRO9M bool "Support Contec Micro9-Mid" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Mid board. @@ -122,6 +127,7 @@ config MACH_MICRO9M config MACH_MICRO9L bool "Support Contec Micro9-Lite" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Lite board. @@ -129,18 +135,21 @@ config MACH_MICRO9L config MACH_MICRO9S bool "Support Contec Micro9-Slim" select MACH_MICRO9 + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Contec Micro9-Slim board. config MACH_SIM_ONE bool "Support Simplemachines Sim.One board" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board. config MACH_SNAPPER_CL15 bool "Support Bluewater Systems Snapper CL15 Module" + depends on UNUSED_BOARD_FILES help Say 'Y' here if you want your kernel to support the Bluewater Systems Snapper CL15 Module. diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 8b48326..51a247c 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -149,6 +149,7 @@ static void exynos_map_pmu(void) np = of_find_matching_node(NULL, exynos_dt_pmu_match); if (np) pmu_base_addr = of_iomap(np, 0); + of_node_put(np); } static void __init exynos_init_irq(void) diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 728aff93..bcd4e4c 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -5,6 +5,7 @@ menu "Footbridge Implementations" config ARCH_CATS bool "CATS" + depends on UNUSED_BOARD_FILES select CLKEVT_I8253 select CLKSRC_I8253 select FOOTBRIDGE_HOST diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig index 75cccbd..7b34406 100644 --- a/arch/arm/mach-hisi/Kconfig +++ b/arch/arm/mach-hisi/Kconfig @@ -40,7 +40,7 @@ config ARCH_HIP04 select HAVE_ARM_ARCH_TIMER select MCPM if SMP select MCPM_QUAD_CLUSTER if SMP - select GENERIC_IRQ_EFFECTIVE_AFF_MASK + select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP help Support for Hisilicon HiP04 SoC family diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 696c59f..77e435d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -96,7 +96,7 @@ config SOC_IMX5 select HAVE_IMX_SRC select MXC_TZIC -config SOC_IMX50 +config SOC_IMX50 bool "i.MX50 support" select PINCTRL_IMX50 select SOC_IMX5 @@ -111,7 +111,7 @@ config SOC_IMX51 help This enables support for Freescale i.MX51 processor -config SOC_IMX53 +config SOC_IMX53 bool "i.MX53 support" select PINCTRL_IMX53 select SOC_IMX5 @@ -216,7 +216,7 @@ config SOC_IMX7D select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M select ARM_ERRATA_814220 if ARCH_MULTI_V7 help - This enables support for Freescale i.MX7 Dual processor. + This enables support for Freescale i.MX7 Dual processor. config SOC_IMX7ULP bool "i.MX7ULP support" diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index b2e1963..3e63445 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -32,6 +32,8 @@ static int mx25_read_cpu_rev(void) return IMX_CHIP_REVISION_1_0; case 0x01: return IMX_CHIP_REVISION_1_1; + case 0x02: + return IMX_CHIP_REVISION_1_2; default: return IMX_CHIP_REVISION_UNKNOWN; } diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig index 01f60a8..761fbb0 100644 --- a/arch/arm/mach-iop32x/Kconfig +++ b/arch/arm/mach-iop32x/Kconfig @@ -3,6 +3,7 @@ menuconfig ARCH_IOP32X bool "IOP32x-based platforms" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN + depends on ATAGS && UNUSED_BOARD_FILES select CPU_XSCALE select GPIO_IOP select GPIOLIB diff --git a/arch/arm/mach-meson/platsmp.c b/arch/arm/mach-meson/platsmp.c index 4b8ad72..32ac60b 100644 --- a/arch/arm/mach-meson/platsmp.c +++ b/arch/arm/mach-meson/platsmp.c @@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible, } sram_base = of_iomap(node, 0); + of_node_put(node); if (!sram_base) { pr_err("Couldn't map SRAM registers\n"); return; @@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible, } scu_base = of_iomap(node, 0); + of_node_put(node); if (!scu_base) { pr_err("Couldn't map SCU registers\n"); return; diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 333229c..d71417d 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -18,6 +18,7 @@ if ATAGS config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -26,6 +27,7 @@ config MACH_ASPENITE config MACH_ZYLONITE2 bool "Marvell's PXA168 Zylonite2 Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -34,6 +36,7 @@ config MACH_ZYLONITE2 config MACH_AVENGERS_LITE bool "Marvell's PXA168 Avengers Lite Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -42,6 +45,7 @@ config MACH_AVENGERS_LITE config MACH_TTC_DKB bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA910 help Say 'Y' here if you want to support the Marvell PXA910-based @@ -50,6 +54,7 @@ config MACH_TTC_DKB config MACH_BROWNSTONE bool "Marvell's Brownstone Development Platform" depends on ARCH_MULTI_V7 + depends on UNUSED_BOARD_FILES select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based @@ -61,6 +66,7 @@ config MACH_BROWNSTONE config MACH_FLINT bool "Marvell's Flint Development Platform" depends on ARCH_MULTI_V7 + depends on UNUSED_BOARD_FILES select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-based @@ -72,6 +78,7 @@ config MACH_FLINT config MACH_MARVELL_JASPER bool "Marvell's Jasper Development Platform" depends on ARCH_MULTI_V7 + depends on UNUSED_BOARD_FILES select CPU_MMP2 help Say 'Y' here if you want to support the Marvell MMP2-base @@ -83,6 +90,7 @@ config MACH_MARVELL_JASPER config MACH_TETON_BGA bool "Marvell's PXA168 Teton BGA Development Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based @@ -91,6 +99,7 @@ config MACH_TETON_BGA config MACH_GPLUGD bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" depends on ARCH_MULTI_V5 + depends on UNUSED_BOARD_FILES select CPU_PXA168 help Say 'Y' here if you want to support the Marvell PXA168-based diff --git a/arch/arm/mach-mmp/mmp2.h b/arch/arm/mach-mmp/mmp2.h index 3ebc1bb..7f80b90 100644 --- a/arch/arm/mach-mmp/mmp2.h +++ b/arch/arm/mach-mmp/mmp2.h @@ -5,13 +5,13 @@ #include extern void mmp2_timer_init(void); -extern void __init mmp2_init_icu(void); extern void __init mmp2_init_irq(void); extern void mmp2_clear_pmic_int(void); #include #include #include +#include #include "devices.h" diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h index 34f907c..c1547e0 100644 --- a/arch/arm/mach-mmp/pxa168.h +++ b/arch/arm/mach-mmp/pxa168.h @@ -5,7 +5,6 @@ #include extern void pxa168_timer_init(void); -extern void __init icu_init_irq(void); extern void __init pxa168_init_irq(void); extern void pxa168_restart(enum reboot_mode, const char *); extern void pxa168_clear_keypad_wakeup(void); @@ -18,6 +17,7 @@ extern void pxa168_clear_keypad_wakeup(void); #include #include #include +#include #include "devices.h" diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h index 6ace5a8..7d22921 100644 --- a/arch/arm/mach-mmp/pxa910.h +++ b/arch/arm/mach-mmp/pxa910.h @@ -3,13 +3,13 @@ #define __ASM_MACH_PXA910_H extern void pxa910_timer_init(void); -extern void __init icu_init_irq(void); extern void __init pxa910_init_irq(void); #include #include #include #include
.*) usecs', last) - if(mc and mr and (mc.group('t') == mr.group('t')) and - (mc.group('f') == mr.group('f'))): + ct, cf, n, p = data.initcall_debug_call(line) + rt, rf, l = data.initcall_debug_return(last) + if ct and rt and ct == rt and cf == rf: i = data.dmesgtext.index(last) j = data.dmesgtext.index(line) data.dmesgtext[i] = line @@ -3777,7 +3935,6 @@ def loadKernelLog(): # Function: parseKernelLog # Description: -# [deprecated for kernel 3.15.0 or newer] # Analyse a dmesg log output file generated from this app during # the execution phase. Create a set of device structures in memory # for subsequent formatting in the html output file @@ -3796,30 +3953,30 @@ def parseKernelLog(data): # dmesg phase match table dm = { - 'suspend_prepare': ['PM: Syncing filesystems.*'], - 'suspend': ['PM: Entering [a-z]* sleep.*', 'Suspending console.*'], - 'suspend_late': ['PM: suspend of devices complete after.*'], - 'suspend_noirq': ['PM: late suspend of devices complete after.*'], - 'suspend_machine': ['PM: noirq suspend of devices complete after.*'], - 'resume_machine': ['ACPI: Low-level resume complete.*'], - 'resume_noirq': ['ACPI: Waking up from system sleep state.*'], - 'resume_early': ['PM: noirq resume of devices complete after.*'], - 'resume': ['PM: early resume of devices complete after.*'], - 'resume_complete': ['PM: resume of devices complete after.*'], + 'suspend_prepare': ['PM: Syncing filesystems.*', 'PM: suspend entry.*'], + 'suspend': ['PM: Entering [a-z]* sleep.*', 'Suspending console.*', + 'PM: Suspending system .*'], + 'suspend_late': ['PM: suspend of devices complete after.*', + 'PM: freeze of devices complete after.*'], + 'suspend_noirq': ['PM: late suspend of devices complete after.*', + 'PM: late freeze of devices complete after.*'], + 'suspend_machine': ['PM: suspend-to-idle', + 'PM: noirq suspend of devices complete after.*', + 'PM: noirq freeze of devices complete after.*'], + 'resume_machine': ['PM: Timekeeping suspended for.*', + 'ACPI: Low-level resume complete.*', + 'ACPI: resume from mwait', + 'Suspended for [0-9\.]* seconds'], + 'resume_noirq': ['PM: resume from suspend-to-idle', + 'ACPI: Waking up from system sleep state.*'], + 'resume_early': ['PM: noirq resume of devices complete after.*', + 'PM: noirq restore of devices complete after.*'], + 'resume': ['PM: early resume of devices complete after.*', + 'PM: early restore of devices complete after.*'], + 'resume_complete': ['PM: resume of devices complete after.*', + 'PM: restore of devices complete after.*'], 'post_resume': ['.*Restarting tasks \.\.\..*'], } - if(sysvals.suspendmode == 'standby'): - dm['resume_machine'] = ['PM: Restoring platform NVS memory'] - elif(sysvals.suspendmode == 'disk'): - dm['suspend_late'] = ['PM: freeze of devices complete after.*'] - dm['suspend_noirq'] = ['PM: late freeze of devices complete after.*'] - dm['suspend_machine'] = ['PM: noirq freeze of devices complete after.*'] - dm['resume_machine'] = ['PM: Restoring platform NVS memory'] - dm['resume_early'] = ['PM: noirq restore of devices complete after.*'] - dm['resume'] = ['PM: early restore of devices complete after.*'] - dm['resume_complete'] = ['PM: restore of devices complete after.*'] - elif(sysvals.suspendmode == 'freeze'): - dm['resume_machine'] = ['ACPI: resume from mwait'] # action table (expected events that occur and show up in dmesg) at = { @@ -3867,12 +4024,13 @@ def parseKernelLog(data): for s in dm[p]: if(re.match(s, msg)): phasechange, phase = True, p + dm[p] = [s] break # hack for determining resume_machine end for freeze if(not sysvals.usetraceevents and sysvals.suspendmode == 'freeze' \ and phase == 'resume_machine' and \ - re.match('calling (?P.*)\+ @ .*, parent: .*', msg)): + data.initcall_debug_call(line, True)): data.setPhase(phase, ktime, False) phase = 'resume_noirq' data.setPhase(phase, ktime, True) @@ -3945,26 +4103,18 @@ def parseKernelLog(data): # -- device callbacks -- if(phase in data.sortedPhases()): # device init call - if(re.match('calling (?P.*)\+ @ .*, parent: .*', msg)): - sm = re.match('calling (?P.*)\+ @ '+\ - '(?P.*), parent: (?P

.*)', msg); - f = sm.group('f') - n = sm.group('n') - p = sm.group('p') - if(f and n and p): - data.newAction(phase, f, int(n), p, ktime, -1, '') - # device init return - elif(re.match('call (?P.*)\+ returned .* after '+\ - '(?P.*) usecs', msg)): - sm = re.match('call (?P.*)\+ returned .* after '+\ - '(?P.*) usecs(?P.*)', msg); - f = sm.group('f') - t = sm.group('t') - list = data.dmesg[phase]['list'] - if(f in list): - dev = list[f] - dev['length'] = int(t) - dev['end'] = ktime + t, f, n, p = data.initcall_debug_call(line) + if t and f and n and p: + data.newAction(phase, f, int(n), p, ktime, -1, '') + else: + # device init return + t, f, l = data.initcall_debug_return(line) + if t and f and l: + list = data.dmesg[phase]['list'] + if(f in list): + dev = list[f] + dev['length'] = int(l) + dev['end'] = ktime # if trace events are not available, these are better than nothing if(not sysvals.usetraceevents): @@ -4006,6 +4156,8 @@ def parseKernelLog(data): # fill in any missing phases phasedef = data.phasedef terr, lp = '', 'suspend_prepare' + if lp not in data.dmesg: + doError('dmesg log format has changed, could not find start of suspend') for p in sorted(phasedef, key=lambda k:phasedef[k]['order']): if p not in data.dmesg: if not terr: @@ -5302,7 +5454,7 @@ def executeSuspend(quiet=False): sv.dlog('read dmesg') sv.initdmesg() # start ftrace - if(sv.usecallgraph or sv.usetraceevents): + if sv.useftrace: if not quiet: pprint('START TRACING') sv.dlog('start ftrace tracing') @@ -5334,8 +5486,7 @@ def executeSuspend(quiet=False): sv.dlog('enable RTC wake alarm') sv.rtcWakeAlarmOn() # start of suspend trace marker - if(sv.usecallgraph or sv.usetraceevents): - sv.fsetVal(datetime.now().strftime(sv.tmstart), 'trace_marker') + sv.fsetVal(datetime.now().strftime(sv.tmstart), 'trace_marker') # predelay delay if(count == 1 and sv.predelay > 0): sv.fsetVal('WAIT %d' % sv.predelay, 'trace_marker') @@ -5384,11 +5535,17 @@ def executeSuspend(quiet=False): sv.fsetVal('WAIT END', 'trace_marker') # return from suspend pprint('RESUME COMPLETE') - if(sv.usecallgraph or sv.usetraceevents): - sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker') + sv.fsetVal(datetime.now().strftime(sv.tmend), 'trace_marker') if sv.wifi and wifi: tdata['wifi'] = sv.pollWifi(wifi) sv.dlog('wifi check, %s' % tdata['wifi']) + if sv.netfix: + netfixout = sv.netfixon('wired') + elif sv.netfix: + netfixout = sv.netfixon() + if sv.netfix and netfixout: + tdata['netfix'] = netfixout + sv.dlog('netfix, %s' % tdata['netfix']) if(sv.suspendmode == 'mem' or sv.suspendmode == 'command'): sv.dlog('read the ACPI FPDT') tdata['fw'] = getFPDT(False) @@ -5396,7 +5553,7 @@ def executeSuspend(quiet=False): sv.dlog('run the cmdinfo list after') cmdafter = sv.cmdinfo(False) # stop ftrace - if(sv.usecallgraph or sv.usetraceevents): + if sv.useftrace: if sv.useprocmon: sv.dlog('stop the process monitor') pm.stop() @@ -5407,7 +5564,7 @@ def executeSuspend(quiet=False): sysvals.dlog('EXECUTION TRACE END') sv.getdmesg(testdata) # grab a copy of the ftrace output - if(sv.usecallgraph or sv.usetraceevents): + if sv.useftrace: if not quiet: pprint('CAPTURING TRACE') op = sv.writeDatafileHeader(sv.ftracefile, testdata) @@ -5838,13 +5995,19 @@ def statusCheck(probecheck=False): pprint(' please choose one with -m') # check if ftrace is available - res = sysvals.colorText('NO') - ftgood = sysvals.verifyFtrace() - if(ftgood): - res = 'YES' - elif(sysvals.usecallgraph): - status = 'ftrace is not properly supported' - pprint(' is ftrace supported: %s' % res) + if sysvals.useftrace: + res = sysvals.colorText('NO') + sysvals.useftrace = sysvals.verifyFtrace() + efmt = '"{0}" uses ftrace, and it is not properly supported' + if sysvals.useftrace: + res = 'YES' + elif sysvals.usecallgraph: + status = efmt.format('-f') + elif sysvals.usedevsrc: + status = efmt.format('-dev') + elif sysvals.useprocmon: + status = efmt.format('-proc') + pprint(' is ftrace supported: %s' % res) # check if kprobes are available if sysvals.usekprobes: @@ -5857,8 +6020,8 @@ def statusCheck(probecheck=False): pprint(' are kprobes supported: %s' % res) # what data source are we using - res = 'DMESG' - if(ftgood): + res = 'DMESG (very limited, ftrace is preferred)' + if sysvals.useftrace: sysvals.usetraceevents = True for e in sysvals.traceevents: if not os.path.exists(sysvals.epath+e): @@ -5879,7 +6042,7 @@ def statusCheck(probecheck=False): pprint(' optional commands this tool may use for info:') no = sysvals.colorText('MISSING') yes = sysvals.colorText('FOUND', 32) - for c in ['turbostat', 'mcelog', 'lspci', 'lsusb']: + for c in ['turbostat', 'mcelog', 'lspci', 'lsusb', 'netfix']: if c == 'turbostat': res = yes if sysvals.haveTurbostat() else no else: @@ -5971,7 +6134,7 @@ def processData(live=False, quiet=False): if not sysvals.stamp: pprint('ERROR: data does not include the expected stamp') return (testruns, {'error': 'timeline generation failed'}) - shown = ['bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr', + shown = ['os', 'bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr', 'memsz', 'mode', 'numcpu', 'plat', 'time', 'wifi'] sysvals.vprint('System Info:') for key in sorted(sysvals.stamp): @@ -6052,6 +6215,8 @@ def runTest(n=0, quiet=False): if sysvals.display: ret = sysvals.displayControl('init') sysvals.dlog('xset display init, ret = %d' % ret) + sysvals.testVal(sysvals.pmdpath, 'basic', '1') + sysvals.testVal(sysvals.s0ixpath, 'basic', 'Y') sysvals.dlog('initialize ftrace') sysvals.initFtrace(quiet) @@ -6145,9 +6310,12 @@ def data_from_html(file, outpath, issues, fulldetail=False): elist[err[0]] += 1 for i in elist: ilist.append('%sx%d' % (i, elist[i]) if elist[i] > 1 else i) - wifi = find_in_html(html, 'Wifi Resume: ', '') - if wifi: - extra['wifi'] = wifi + line = find_in_html(log, '# wifi ', '\n') + if line: + extra['wifi'] = line + line = find_in_html(log, '# netfix ', '\n') + if line: + extra['netfix'] = line low = find_in_html(html, 'freeze time: ', ' ms') for lowstr in ['waking', '+']: if not low: @@ -6243,7 +6411,7 @@ def genHtml(subdir, force=False): sysvals.ftracefile = file sysvals.setOutputFile() if (sysvals.dmesgfile or sysvals.ftracefile) and sysvals.htmlfile and \ - (force or not sysvals.usable(sysvals.htmlfile)): + (force or not sysvals.usable(sysvals.htmlfile, True)): pprint('FTRACE: %s' % sysvals.ftracefile) if sysvals.dmesgfile: pprint('DMESG : %s' % sysvals.dmesgfile) @@ -6533,6 +6701,7 @@ def printHelp(): ' -skiphtml Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\ ' -result fn Export a results table to a text file for parsing.\n'\ ' -wifi If a wifi connection is available, check that it reconnects after resume.\n'\ + ' -netfix Use netfix to reset the network in the event it fails to resume.\n'\ ' [testprep]\n'\ ' -sync Sync the filesystems before starting the test\n'\ ' -rs on/off Enable/disable runtime suspend for all devices, restore all after test\n'\ @@ -6615,6 +6784,8 @@ if __name__ == '__main__': elif(arg == '-v'): pprint("Version %s" % sysvals.version) sys.exit(0) + elif(arg == '-debugtiming'): + debugtiming = True elif(arg == '-x2'): sysvals.execcount = 2 elif(arg == '-x2delay'): @@ -6657,6 +6828,8 @@ if __name__ == '__main__': sysvals.sync = True elif(arg == '-wifi'): sysvals.wifi = True + elif(arg == '-netfix'): + sysvals.netfix = True elif(arg == '-gzip'): sysvals.gzip = True elif(arg == '-info'): @@ -6819,7 +6992,7 @@ if __name__ == '__main__': sysvals.outdir = val sysvals.notestrun = True if(os.path.isdir(val) == False): - doError('%s is not accessible' % val) + doError('%s is not accesible' % val) elif(arg == '-filter'): try: val = next(args) @@ -6942,12 +7115,11 @@ if __name__ == '__main__': time.sleep(sysvals.multitest['delay']) fmt = 'suspend-%y%m%d-%H%M%S' sysvals.testdir = os.path.join(sysvals.outdir, datetime.now().strftime(fmt)) - ret = runTest(i+1, True) + ret = runTest(i+1, not sysvals.verbose) failcnt = 0 if not ret else failcnt + 1 if sysvals.maxfail > 0 and failcnt >= sysvals.maxfail: pprint('Maximum fail count of %d reached, aborting multitest' % (sysvals.maxfail)) break - time.sleep(5) sysvals.resetlog() sysvals.multistat(False, i, finish) if 'time' in sysvals.multitest and datetime.now() >= finish: diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 index 1e7d3de..c7b26a3 100644 --- a/tools/power/x86/turbostat/turbostat.8 +++ b/tools/power/x86/turbostat/turbostat.8 @@ -92,40 +92,66 @@ displays the statistics gathered since it was forked. .SH ROW DESCRIPTIONS The system configuration dump (if --quiet is not used) is followed by statistics. The first row of the statistics labels the content of each column (below). The second row of statistics is the system summary line. The system summary line has a '-' in the columns for the Package, Core, and CPU. The contents of the system summary line depends on the type of column. Columns that count items (eg. IRQ) show the sum across all CPUs in the system. Columns that show a percentage show the average across all CPUs in the system. Columns that dump raw MSR values simply show 0 in the summary. After the system summary row, each row describes a specific Package/Core/CPU. Note that if the --cpu parameter is used to limit which specific CPUs are displayed, turbostat will still collect statistics for all CPUs in the system and will still show the system summary for all CPUs in the system. .SH COLUMN DESCRIPTIONS -.nf +.PP \fBusec\fP For each CPU, the number of microseconds elapsed during counter collection, including thread migration -- if any. This counter is disabled by default, and is enabled with "--enable usec", or --debug. On the summary row, usec refers to the total elapsed time to collect the counters on all cpus. +.PP \fBTime_Of_Day_Seconds\fP For each CPU, the gettimeofday(2) value (seconds.subsec since Epoch) when the counters ending the measurement interval were collected. This column is disabled by default, and can be enabled with "--enable Time_Of_Day_Seconds" or "--debug". On the summary row, Time_Of_Day_Seconds refers to the timestamp following collection of counters on the last CPU. +.PP \fBCore\fP processor core number. Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT). +.PP \fBCPU\fP Linux CPU (logical processor) number. Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together. +.PP \fBPackage\fP processor package number -- not present on systems with a single processor package. +.PP \fBAvg_MHz\fP number of cycles executed divided by time elapsed. Note that this includes idle-time when 0 instructions are executed. +.PP \fBBusy%\fP percent of the measurement interval that the CPU executes instructions, aka. % of time in "C0" state. +.PP \fBBzy_MHz\fP average clock rate while the CPU was not idle (ie. in "c0" state). +.PP \fBTSC_MHz\fP average MHz that the TSC ran during the entire interval. +.PP \fBIRQ\fP The number of interrupts serviced by that CPU during the measurement interval. The system total line is the sum of interrupts serviced across all CPUs. turbostat parses /proc/interrupts to generate this summary. +.PP \fBSMI\fP The number of System Management Interrupts serviced CPU during the measurement interval. While this counter is actually per-CPU, SMI are triggered on all processors, so the number should be the same for all CPUs. +.PP \fBC1, C2, C3...\fP The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system. +.PP \fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved. +.PP \fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters. +.PP \fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor. +.PP \fBPkgTmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. +.PP \fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms. +.PP \fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz. +.PP \fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters. +.PP \fBPkgWatt\fP Watts consumed by the whole package. +.PP \fBCorWatt\fP Watts consumed by the core part of the package. +.PP \fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors. +.PP \fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors. +.PP \fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package. Note that the system summary is the sum of the package throttling time, and thus may be higher than 100% on a multi-package system. Note that the meaning of this field is model specific. For example, some hardware increments this counter when RAPL responds to thermal limits, but does not increment this counter when RAPL responds to power limits. Comparing PkgWatt and PkgTmp to system limits is necessary. +.PP \fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM. -.fi +.PP +\fBUncMHz\fP uncore MHz, instantaneous sample. .SH TOO MUCH INFORMATION EXAMPLE By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters. This is ideal for remote debugging, use the "--out" option to save everything to a text file, and get that file to the expert helping you debug. .PP When you are not interested in all that information, and there are several ways to see only what you want. First the "--quiet" option will skip the configuration information, and turbostat will show only the counter columns. Second, you can reduce the columns with the "--hide" and "--show" options. If you use the "--show" option, then turbostat will show only the columns you list. If you use the "--hide" option, turbostat will show all columns, except the ones you list. .PP -To find out what columns are available for --show and --hide, the "--list" option is available. For convenience, the special strings "sysfs" can be used to refer to all of the sysfs C-state counters at once: +To find out what columns are available for --show and --hide, the "--list" option is available. Usually, the CATEGORY names above are used to refer to groups of counters. Also, for convenience, the special string "sysfs" can be used to refer to all of the sysfs C-state counters at once: +.PP .nf sudo ./turbostat --show sysfs --quiet sleep 10 10.003837 sec @@ -158,32 +184,29 @@ Without a command to fork, turbostat displays statistics ever 5 seconds. Periodic output goes to stdout, by default, unless --out is used to specify an output file. The 5-second interval can be changed with the "-i sec" option. .nf -sudo ./turbostat --quiet --hide sysfs,IRQ,SMI,CoreTmp,PkgTmp,GFX%rc6,GFXMHz,PkgWatt,CorWatt,GFXWatt - Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7 - - - 488 12.52 3900 3498 12.50 0.00 0.00 74.98 - 0 0 5 0.13 3900 3498 99.87 0.00 0.00 0.00 - 0 4 3897 99.99 3900 3498 0.01 - 1 1 0 0.00 3856 3498 0.01 0.00 0.00 99.98 - 1 5 0 0.00 3861 3498 0.01 - 2 2 1 0.02 3889 3498 0.03 0.00 0.00 99.95 - 2 6 0 0.00 3863 3498 0.05 - 3 3 0 0.01 3869 3498 0.02 0.00 0.00 99.97 - 3 7 0 0.00 3878 3498 0.03 - Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7 - - - 491 12.59 3900 3498 12.42 0.00 0.00 74.99 - 0 0 27 0.69 3900 3498 99.31 0.00 0.00 0.00 - 0 4 3898 99.99 3900 3498 0.01 - 1 1 0 0.00 3883 3498 0.01 0.00 0.00 99.99 - 1 5 0 0.00 3898 3498 0.01 - 2 2 0 0.01 3889 3498 0.02 0.00 0.00 99.98 - 2 6 0 0.00 3889 3498 0.02 - 3 3 0 0.00 3856 3498 0.01 0.00 0.00 99.99 - 3 7 0 0.00 3897 3498 0.01 +sudo turbostat --quiet --show CPU,frequency + Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c7 UncMhz + - - 524 12.48 4198 3096 74.53 3800 + 0 0 4 0.09 4081 3096 98.88 3800 + 0 4 1 0.02 4063 3096 + 1 1 2 0.06 4063 3096 99.60 + 1 5 2 0.05 4070 3096 + 2 2 4178 99.52 4199 3096 0.00 + 2 6 3 0.08 4159 3096 + 3 3 1 0.04 4046 3096 99.66 + 3 7 0 0.01 3989 3096 + Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c7 UncMhz + - - 525 12.52 4198 3096 74.54 3800 + 0 0 4 0.10 4051 3096 99.49 3800 + 0 4 2 0.04 3993 3096 + 1 1 3 0.07 4054 3096 99.56 + 1 5 4 0.10 4018 3096 + 2 2 4178 99.51 4199 3096 0.00 + 2 6 4 0.09 4143 3096 + 3 3 2 0.06 4026 3096 99.10 + 3 7 7 0.17 4074 3096 .fi -This example also shows the use of the --hide option to skip columns that are not wanted. -Note that cpu4 in this example is 99.99% busy, while the other CPUs are all under 1% busy. -Notice that cpu4's HT sibling is cpu0, which is under 1% busy, but can get into CPU%c1 only, -because its cpu4's activity on shared hardware keeps it from entering a deeper C-state. +This example also shows the use of the --show option to show only the desired columns. .SH SYSTEM CONFIGURATION INFORMATION EXAMPLE @@ -191,61 +214,86 @@ By default, turbostat always dumps system configuration information before taking measurements. In the example above, "--quiet" is used to suppress that output. Here is an example of the configuration information: .nf -turbostat version 2017.02.15 - Len Brown -CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3) -CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM TM -CPUID(6): APERF, TURBO, DTS, PTM, No-HWP, No-HWPnotify, No-HWPwindow, No-HWPepp, No-HWPpkg, EPB -cpu4: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO) -CPUID(7): No-SGX -cpu4: MSR_MISC_PWR_MGMT: 0x00400000 (ENable-EIST_Coordination DISable-EPB DISable-OOB) -RAPL: 3121 sec. Joule Counter Range, at 84 Watts -cpu4: MSR_PLATFORM_INFO: 0x80838f3012300 +turbostat version 2022.04.16 - Len Brown +Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.18.0-rc6-00001-ge6891250e3b5 ... +CPUID(0): GenuineIntel 0x16 CPUID levels +CPUID(1): family:model:stepping 0x6:9e:9 (6:158:9) microcode 0xea +CPUID(0x80000000): max_extended_levels: 0x80000008 +CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM +CPUID(6): APERF, TURBO, DTS, PTM, HWP, HWPnotify, HWPwindow, HWPepp, No-HWPpkg, EPB +cpu7: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO) +CPUID(7): SGX +cpu7: MSR_IA32_FEATURE_CONTROL: 0x00000005 (Locked ) +CPUID(0x15): eax_crystal: 2 ebx_tsc: 258 ecx_crystal_hz: 0 +TSC: 3096 MHz (24000000 Hz * 258 / 2 / 1000000) +CPUID(0x16): base_mhz: 3100 max_mhz: 4200 bus_mhz: 100 +cpu7: MSR_MISC_PWR_MGMT: 0x00401cc0 (ENable-EIST_Coordination DISable-EPB DISable-OOB) +RAPL: 5825 sec. Joule Counter Range, at 45 Watts +cpu7: MSR_PLATFORM_INFO: 0x80839f1011f00 8 * 100.0 = 800.0 MHz max efficiency frequency -35 * 100.0 = 3500.0 MHz base frequency -cpu4: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled) -cpu4: MSR_TURBO_RATIO_LIMIT: 0x25262727 -37 * 100.0 = 3700.0 MHz max turbo 4 active cores -38 * 100.0 = 3800.0 MHz max turbo 3 active cores -39 * 100.0 = 3900.0 MHz max turbo 2 active cores -39 * 100.0 = 3900.0 MHz max turbo 1 active cores -cpu4: MSR_CONFIG_TDP_NOMINAL: 0x00000023 (base_ratio=35) -cpu4: MSR_CONFIG_TDP_LEVEL_1: 0x00000000 () -cpu4: MSR_CONFIG_TDP_LEVEL_2: 0x00000000 () -cpu4: MSR_CONFIG_TDP_CONTROL: 0x80000000 ( lock=1) -cpu4: MSR_TURBO_ACTIVATION_RATIO: 0x00000000 (MAX_NON_TURBO_RATIO=0 lock=0) -cpu4: MSR_PKG_CST_CONFIG_CONTROL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0) -cpu4: POLL: CPUIDLE CORE POLL IDLE -cpu4: C1: MWAIT 0x00 -cpu4: C1E: MWAIT 0x01 -cpu4: C3: MWAIT 0x10 -cpu4: C6: MWAIT 0x20 -cpu4: C7s: MWAIT 0x32 -cpu4: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch) -cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced) -cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Transitions, MultiCoreTurbo, Amps, Auto-HWP, ) -cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x00000000 (Active: ) (Logged: ) -cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d000000 (Active: ) (Logged: Amps, PkgPwrL1, PkgPwrL2, ) +31 * 100.0 = 3100.0 MHz base frequency +cpu7: MSR_IA32_POWER_CTL: 0x002c005d (C1E auto-promotion: DISabled) +cpu7: MSR_TURBO_RATIO_LIMIT: 0x2728292a +39 * 100.0 = 3900.0 MHz max turbo 4 active cores +40 * 100.0 = 4000.0 MHz max turbo 3 active cores +41 * 100.0 = 4100.0 MHz max turbo 2 active cores +42 * 100.0 = 4200.0 MHz max turbo 1 active cores +cpu7: MSR_CONFIG_TDP_NOMINAL: 0x0000001f (base_ratio=31) +cpu7: MSR_CONFIG_TDP_LEVEL_1: 0x00000000 () +cpu7: MSR_CONFIG_TDP_LEVEL_2: 0x00000000 () +cpu7: MSR_CONFIG_TDP_CONTROL: 0x80000000 ( lock=1) +cpu7: MSR_TURBO_ACTIVATION_RATIO: 0x00000000 (MAX_NON_TURBO_RATIO=0 lock=0) +cpu7: MSR_PKG_CST_CONFIG_CONTROL: 0x1e008008 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, locked, pkg-cstate-limit=8 (unlimited)) +Uncore Frequency pkg0 die0: 800 - 3900 MHz (800 - 3900 MHz) +/dev/cpu_dma_latency: 2000000000 usec (default) +current_driver: intel_idle +current_governor: menu +current_governor_ro: menu +cpu7: POLL: CPUIDLE CORE POLL IDLE +cpu7: C1: MWAIT 0x00 +cpu7: C1E: MWAIT 0x01 +cpu7: C3: MWAIT 0x10 +cpu7: C6: MWAIT 0x20 +cpu7: C7s: MWAIT 0x33 +cpu7: C8: MWAIT 0x40 +cpu7: C9: MWAIT 0x50 +cpu7: C10: MWAIT 0x60 +cpu7: cpufreq driver: intel_pstate +cpu7: cpufreq governor: performance +cpufreq intel_pstate no_turbo: 0 +cpu7: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch) +cpu0: MSR_PM_ENABLE: 0x00000001 (HWP) +cpu0: MSR_HWP_CAPABILITIES: 0x01101f53 (high 83 guar 31 eff 16 low 1) +cpu0: MSR_HWP_REQUEST: 0x00005353 (min 83 max 83 des 0 epp 0x0 window 0x0 pkg 0x0) +cpu0: MSR_HWP_INTERRUPT: 0x00000001 (EN_Guaranteed_Perf_Change, Dis_Excursion_Min) +cpu0: MSR_HWP_STATUS: 0x00000004 (No-Guaranteed_Perf_Change, No-Excursion_Min) +cpu0: EPB: 6 (balanced) cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.) -cpu0: MSR_PKG_POWER_INFO: 0x000002a0 (84 W TDP, RAPL 0 - 0 W, 0.000000 sec.) -cpu0: MSR_PKG_POWER_LIMIT: 0x428348001a82a0 (UNlocked) -cpu0: PKG Limit #1: ENabled (84.000000 Watts, 8.000000 sec, clamp DISabled) -cpu0: PKG Limit #2: ENabled (105.000000 Watts, 0.002441* sec, clamp DISabled) +cpu0: MSR_PKG_POWER_INFO: 0x00000168 (45 W TDP, RAPL 0 - 0 W, 0.000000 sec.) +cpu0: MSR_PKG_POWER_LIMIT: 0x42820800218208 (UNlocked) +cpu0: PKG Limit #1: ENabled (65.000 Watts, 64.000000 sec, clamp ENabled) +cpu0: PKG Limit #2: ENabled (65.000 Watts, 0.002441* sec, clamp DISabled) +cpu0: MSR_VR_CURRENT_CONFIG: 0x00000000 +cpu0: PKG Limit #4: 0.000000 Watts (UNlocked) +cpu0: MSR_DRAM_POWER_LIMIT: 0x5400de00000000 (UNlocked) +cpu0: DRAM Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled) cpu0: MSR_PP0_POLICY: 0 cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked) -cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled) +cpu0: Cores Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled) cpu0: MSR_PP1_POLICY: 0 cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked) -cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled) -cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C) -cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0800 (24 C) -cpu0: MSR_IA32_THERM_STATUS: 0x884c0000 (24 C +/- 1) -cpu1: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1) -cpu2: MSR_IA32_THERM_STATUS: 0x884e0000 (22 C +/- 1) -cpu3: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1) -cpu4: MSR_PKGC3_IRTL: 0x00008842 (valid, 67584 ns) -cpu4: MSR_PKGC6_IRTL: 0x00008873 (valid, 117760 ns) -cpu4: MSR_PKGC7_IRTL: 0x00008891 (valid, 148480 ns) +cpu0: GFX Limit: DISabled (0.000 Watts, 0.000977 sec, clamp DISabled) +cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00640000 (100 C) (100 default - 0 offset) +cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88200800 (68 C) +cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C) +cpu7: MSR_PKGC3_IRTL: 0x0000884e (valid, 79872 ns) +cpu7: MSR_PKGC6_IRTL: 0x00008876 (valid, 120832 ns) +cpu7: MSR_PKGC7_IRTL: 0x00008894 (valid, 151552 ns) +cpu7: MSR_PKGC8_IRTL: 0x000088fa (valid, 256000 ns) +cpu7: MSR_PKGC9_IRTL: 0x0000894c (valid, 339968 ns) +cpu7: MSR_PKGC10_IRTL: 0x00008bf2 (valid, 1034240 ns) .fi +.PP The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency available at the minimum package voltage. The \fBTSC frequency\fP is the base frequency of the processor -- this should match the brand string diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index ede31a4..831dc32 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -126,6 +126,7 @@ struct msr_counter bic[] = { { 0x0, "GFXAMHz", "", 0, 0, 0, NULL, 0 }, { 0x0, "IPC", "", 0, 0, 0, NULL, 0 }, { 0x0, "CoreThr", "", 0, 0, 0, NULL, 0 }, + { 0x0, "UncMHz", "", 0, 0, 0, NULL, 0 }, }; #define MAX_BIC (sizeof(bic) / sizeof(struct msr_counter)) @@ -183,10 +184,11 @@ struct msr_counter bic[] = { #define BIC_GFXACTMHz (1ULL << 51) #define BIC_IPC (1ULL << 52) #define BIC_CORE_THROT_CNT (1ULL << 53) +#define BIC_UNCORE_MHZ (1ULL << 54) #define BIC_TOPOLOGY (BIC_Package | BIC_Node | BIC_CoreCnt | BIC_PkgCnt | BIC_Core | BIC_CPU | BIC_Die ) #define BIC_THERMAL_PWR ( BIC_CoreTmp | BIC_PkgTmp | BIC_PkgWatt | BIC_CorWatt | BIC_GFXWatt | BIC_RAMWatt | BIC_PKG__ | BIC_RAM__) -#define BIC_FREQUENCY ( BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz ) +#define BIC_FREQUENCY ( BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz | BIC_UNCORE_MHZ) #define BIC_IDLE ( BIC_sysfs | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX) #define BIC_OTHER ( BIC_IRQ | BIC_SMI | BIC_ThreadC | BIC_CoreTmp | BIC_IPC) @@ -228,6 +230,7 @@ unsigned int do_slm_cstates; unsigned int use_c1_residency_msr; unsigned int has_aperf; unsigned int has_epb; +unsigned int is_hybrid; unsigned int do_irtl_snb; unsigned int do_irtl_hsw; unsigned int units = 1000000; /* MHz etc */ @@ -393,6 +396,7 @@ struct pkg_data { unsigned long long rapl_pkg_perf_status; /* MSR_PKG_PERF_STATUS */ unsigned long long rapl_dram_perf_status; /* MSR_DRAM_PERF_STATUS */ unsigned int pkg_temp_c; + unsigned int uncore_mhz; unsigned long long counter[MAX_ADDED_COUNTERS]; } *package_even, *package_odd; @@ -988,6 +992,9 @@ void print_header(char *delim) if (DO_BIC(BIC_RAM__)) outp += sprintf(outp, "%sRAM_%%", (printed++ ? delim : "")); } + if (DO_BIC(BIC_UNCORE_MHZ)) + outp += sprintf(outp, "%sUncMHz", (printed++ ? delim : "")); + for (mp = sys.pp; mp; mp = mp->next) { if (mp->format == FORMAT_RAW) { if (mp->width == 64) @@ -1370,6 +1377,9 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data outp += sprintf(outp, fmt8, (printed++ ? delim : ""), 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float); + /* UncMHz */ + if (DO_BIC(BIC_UNCORE_MHZ)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->uncore_mhz); for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { if (mp->format == FORMAT_RAW) { @@ -1471,6 +1481,7 @@ int delta_package(struct pkg_data *new, struct pkg_data *old) else old->gfx_rc6_ms = new->gfx_rc6_ms - old->gfx_rc6_ms; + old->uncore_mhz = new->uncore_mhz; old->gfx_mhz = new->gfx_mhz; old->gfx_act_mhz = new->gfx_act_mhz; @@ -1689,6 +1700,7 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data p->pkg_temp_c = 0; p->gfx_rc6_ms = 0; + p->uncore_mhz = 0; p->gfx_mhz = 0; p->gfx_act_mhz = 0; for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) @@ -1788,6 +1800,7 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) average.packages.energy_gfx += p->energy_gfx; average.packages.gfx_rc6_ms = p->gfx_rc6_ms; + average.packages.uncore_mhz = p->uncore_mhz; average.packages.gfx_mhz = p->gfx_mhz; average.packages.gfx_act_mhz = p->gfx_act_mhz; @@ -1948,6 +1961,16 @@ int get_mp(int cpu, struct msr_counter *mp, unsigned long long *counterp) return 0; } +unsigned long long get_uncore_mhz(int package, int die) +{ + char path[128]; + + sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/current_freq_khz", package, + die); + + return (snapshot_sysfs_counter(path) / 1000); +} + int get_epb(int cpu) { char path[128 + PATH_BYTES]; @@ -2035,9 +2058,9 @@ int get_core_throt_cnt(int cpu, unsigned long long *cnt) if (!fp) return -1; ret = fscanf(fp, "%lld", &tmp); + fclose(fp); if (ret != 1) return -1; - fclose(fp); *cnt = tmp; return 0; @@ -2297,6 +2320,10 @@ retry: if (DO_BIC(BIC_GFX_rc6)) p->gfx_rc6_ms = gfx_cur_rc6_ms; + /* n.b. assume die0 uncore frequency applies to whole package */ + if (DO_BIC(BIC_UNCORE_MHZ)) + p->uncore_mhz = get_uncore_mhz(p->package_id, 0); + if (DO_BIC(BIC_GFXMHz)) p->gfx_mhz = gfx_cur_mhz; @@ -2494,6 +2521,7 @@ int has_turbo_ratio_group_limits(int family, int model) case INTEL_FAM6_ATOM_GOLDMONT: case INTEL_FAM6_SKYLAKE_X: case INTEL_FAM6_ICELAKE_X: + case INTEL_FAM6_SAPPHIRERAPIDS_X: case INTEL_FAM6_ATOM_GOLDMONT_D: case INTEL_FAM6_ATOM_TREMONT_D: return 1; @@ -2502,13 +2530,14 @@ int has_turbo_ratio_group_limits(int family, int model) } } -static void dump_turbo_ratio_limits(int family, int model) +static void dump_turbo_ratio_limits(int trl_msr_offset, int family, int model) { unsigned long long msr, core_counts; - unsigned int ratio, group_size; + int shift; - get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr); - fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT: 0x%08llx\n", base_cpu, msr); + get_msr(base_cpu, trl_msr_offset, &msr); + fprintf(outf, "cpu%d: MSR_%sTURBO_RATIO_LIMIT: 0x%08llx\n", + base_cpu, trl_msr_offset == MSR_SECONDARY_TURBO_RATIO_LIMIT ? "SECONDARY" : "", msr); if (has_turbo_ratio_group_limits(family, model)) { get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &core_counts); @@ -2517,53 +2546,16 @@ static void dump_turbo_ratio_limits(int family, int model) core_counts = 0x0807060504030201; } - ratio = (msr >> 56) & 0xFF; - group_size = (core_counts >> 56) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); + for (shift = 56; shift >= 0; shift -= 8) { + unsigned int ratio, group_size; - ratio = (msr >> 48) & 0xFF; - group_size = (core_counts >> 48) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); - - ratio = (msr >> 40) & 0xFF; - group_size = (core_counts >> 40) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); - - ratio = (msr >> 32) & 0xFF; - group_size = (core_counts >> 32) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); - - ratio = (msr >> 24) & 0xFF; - group_size = (core_counts >> 24) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); - - ratio = (msr >> 16) & 0xFF; - group_size = (core_counts >> 16) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); - - ratio = (msr >> 8) & 0xFF; - group_size = (core_counts >> 8) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); + ratio = (msr >> shift) & 0xFF; + group_size = (core_counts >> shift) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + } - ratio = (msr >> 0) & 0xFF; - group_size = (core_counts >> 0) & 0xFF; - if (ratio) - fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", - ratio, bclk, ratio * bclk, group_size); return; } @@ -2976,7 +2968,7 @@ int get_thread_siblings(struct cpu_topology *thiscpu) } } } - } while (!strncmp(&character, ",", 1)); + } while (character == ','); fclose(filep); return CPU_COUNT_S(size, thiscpu->put_ids); @@ -3742,6 +3734,7 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) has_misc_feature_control = 1; break; case INTEL_FAM6_SKYLAKE_X: /* SKX */ + case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ pkg_cstate_limits = skx_pkg_cstate_limits; has_misc_feature_control = 1; break; @@ -3871,6 +3864,22 @@ int is_icx(unsigned int family, unsigned int model) return 0; } +int is_spr(unsigned int family, unsigned int model) +{ + + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + switch (model) { + case INTEL_FAM6_SAPPHIRERAPIDS_X: + return 1; + } + return 0; +} + int is_ehl(unsigned int family, unsigned int model) { if (!genuine_intel) @@ -3988,6 +3997,7 @@ int has_glm_turbo_ratio_limit(unsigned int family, unsigned int model) case INTEL_FAM6_ATOM_GOLDMONT: case INTEL_FAM6_SKYLAKE_X: case INTEL_FAM6_ICELAKE_X: + case INTEL_FAM6_SAPPHIRERAPIDS_X: return 1; default: return 0; @@ -4015,7 +4025,7 @@ int has_config_tdp(unsigned int family, unsigned int model) case INTEL_FAM6_CANNONLAKE_L: /* CNL */ case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_ICELAKE_X: /* ICX */ - + case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ return 1; default: @@ -4083,8 +4093,12 @@ static void dump_cstate_pstate_config_info(unsigned int family, unsigned int mod if (has_ivt_turbo_ratio_limit(family, model)) dump_ivt_turbo_ratio_limits(); - if (has_turbo_ratio_limit(family, model)) - dump_turbo_ratio_limits(family, model); + if (has_turbo_ratio_limit(family, model)) { + dump_turbo_ratio_limits(MSR_TURBO_RATIO_LIMIT, family, model); + + if (is_hybrid) + dump_turbo_ratio_limits(MSR_SECONDARY_TURBO_RATIO_LIMIT, family, model); + } if (has_atom_turbo_ratio_limit(family, model)) dump_atom_turbo_ratio_limits(); @@ -4098,6 +4112,24 @@ static void dump_cstate_pstate_config_info(unsigned int family, unsigned int mod dump_nhm_cst_cfg(); } +static int read_sysfs_int(char *path) +{ + FILE *input; + int retval = -1; + + input = fopen(path, "r"); + if (input == NULL) { + if (debug) + fprintf(outf, "NSFOD %s\n", path); + return (-1); + } + if (fscanf(input, "%d", &retval) != 1) + err(1, "%s: failed to read int from file", path); + fclose(input); + + return (retval); +} + static void dump_sysfs_file(char *path) { FILE *input; @@ -4116,6 +4148,48 @@ static void dump_sysfs_file(char *path) fprintf(outf, "%s: %s", strrchr(path, '/') + 1, cpuidle_buf); } +static void intel_uncore_frequency_probe(void) +{ + int i, j; + char path[128]; + + if (!genuine_intel) + return; + + if (access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00", R_OK)) + return; + + if (!access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz", R_OK)) + BIC_PRESENT(BIC_UNCORE_MHZ); + + if (quiet) + return; + + for (i = 0; i < topo.num_packages; ++i) { + for (j = 0; j < topo.num_die; ++j) { + int k, l; + + sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/min_freq_khz", + i, j); + k = read_sysfs_int(path); + sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/max_freq_khz", + i, j); + l = read_sysfs_int(path); + fprintf(outf, "Uncore Frequency pkg%d die%d: %d - %d MHz ", i, j, k / 1000, l / 1000); + + sprintf(path, + "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/initial_min_freq_khz", + i, j); + k = read_sysfs_int(path); + sprintf(path, + "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/initial_max_freq_khz", + i, j); + l = read_sysfs_int(path); + fprintf(outf, "(%d - %d MHz)\n", k / 1000, l / 1000); + } + } +} + static void dump_sysfs_cstate_config(void) { char path[64]; @@ -4486,6 +4560,7 @@ static double rapl_dram_energy_units_probe(int model, double rapl_energy_units) case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ case INTEL_FAM6_ICELAKE_X: /* ICX */ + case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ return (rapl_dram_energy_units = 15.3 / 1000000); default: return (rapl_energy_units); @@ -4575,6 +4650,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) case INTEL_FAM6_BROADWELL_X: /* BDX */ case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_ICELAKE_X: /* ICX */ + case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | @@ -4740,13 +4816,19 @@ void perf_limit_reasons_probe(unsigned int family, unsigned int model) void automatic_cstate_conversion_probe(unsigned int family, unsigned int model) { - if (is_skx(family, model) || is_bdx(family, model) || is_icx(family, model)) + if (family != 6) + return; + + switch (model) { + case INTEL_FAM6_BROADWELL_X: + case INTEL_FAM6_SKYLAKE_X: has_automatic_cstate_conversion = 1; + } } void prewake_cstate_probe(unsigned int family, unsigned int model) { - if (is_icx(family, model)) + if (is_icx(family, model) || is_spr(family, model)) dis_cstate_prewake = 1; } @@ -4975,6 +5057,7 @@ int has_snb_msrs(unsigned int family, unsigned int model) case INTEL_FAM6_CANNONLAKE_L: /* CNL */ case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_ICELAKE_X: /* ICX */ + case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ case INTEL_FAM6_ATOM_GOLDMONT_PLUS: case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ @@ -5361,13 +5444,15 @@ unsigned int intel_model_duplicates(unsigned int model) case INTEL_FAM6_LAKEFIELD: case INTEL_FAM6_ALDERLAKE: case INTEL_FAM6_ALDERLAKE_L: + case INTEL_FAM6_ALDERLAKE_N: + case INTEL_FAM6_RAPTORLAKE: + case INTEL_FAM6_RAPTORLAKE_P: return INTEL_FAM6_CANNONLAKE_L; case INTEL_FAM6_ATOM_TREMONT_L: return INTEL_FAM6_ATOM_TREMONT; case INTEL_FAM6_ICELAKE_D: - case INTEL_FAM6_SAPPHIRERAPIDS_X: return INTEL_FAM6_ICELAKE_X; } return model; @@ -5398,7 +5483,7 @@ void print_dev_latency(void) } /* - * Linux-perf manages the the HW instructions-retired counter + * Linux-perf manages the HW instructions-retired counter * by enabling when requested, and hiding rollover */ void linux_perf_init(void) @@ -5543,7 +5628,10 @@ void process_cpuid() __cpuid_count(0x7, 0, eax, ebx, ecx, edx); has_sgx = ebx & (1 << 2); - fprintf(outf, "CPUID(7): %sSGX\n", has_sgx ? "" : "No-"); + + is_hybrid = edx & (1 << 15); + + fprintf(outf, "CPUID(7): %sSGX %sHybrid\n", has_sgx ? "" : "No-", is_hybrid ? "" : "No-"); if (has_sgx) decode_feature_control_msr(); @@ -5654,7 +5742,7 @@ void process_cpuid() BIC_NOT_PRESENT(BIC_Pkgpc7); use_c1_residency_msr = 1; } - if (is_skx(family, model) || is_icx(family, model)) { + if (is_skx(family, model) || is_icx(family, model) || is_spr(family, model)) { BIC_NOT_PRESENT(BIC_CPU_c3); BIC_NOT_PRESENT(BIC_Pkgpc3); BIC_NOT_PRESENT(BIC_CPU_c7); @@ -5699,6 +5787,7 @@ void process_cpuid() if (!quiet) dump_cstate_pstate_config_info(family, model); + intel_uncore_frequency_probe(); if (!quiet) print_dev_latency(); @@ -6128,7 +6217,30 @@ int get_and_dump_counters(void) void print_version() { - fprintf(outf, "turbostat version 2022.04.16 - Len Brown \n"); + fprintf(outf, "turbostat version 2022.07.28 - Len Brown \n"); +} + +#define COMMAND_LINE_SIZE 2048 + +void print_bootcmd(void) +{ + char bootcmd[COMMAND_LINE_SIZE]; + FILE *fp; + int ret; + + memset(bootcmd, 0, COMMAND_LINE_SIZE); + fp = fopen("/proc/cmdline", "r"); + if (!fp) + return; + + ret = fread(bootcmd, sizeof(char), COMMAND_LINE_SIZE - 1, fp); + if (ret) { + bootcmd[ret] = '\0'; + /* the last character is already '\n' */ + fprintf(outf, "Kernel command line: %s", bootcmd); + } + + fclose(fp); } int add_counter(unsigned int msr_num, char *path, char *name, @@ -6602,8 +6714,10 @@ int main(int argc, char **argv) outf = stderr; cmdline(argc, argv); - if (!quiet) + if (!quiet) { print_version(); + print_bootcmd(); + } probe_sysfs(); diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c index 83844f8..b0ca44c 100644 --- a/tools/spi/spidev_test.c +++ b/tools/spi/spidev_test.c @@ -417,6 +417,7 @@ int main(int argc, char *argv[]) { int ret = 0; int fd; + uint32_t request; parse_opts(argc, argv); @@ -430,13 +431,23 @@ int main(int argc, char *argv[]) /* * spi mode */ + /* WR is make a request to assign 'mode' */ + request = mode; ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode); if (ret == -1) pabort("can't set spi mode"); + /* RD is read what mode the device actually is in */ ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode); if (ret == -1) pabort("can't get spi mode"); + /* Drivers can reject some mode bits without returning an error. + * Read the current value to identify what mode it is in, and if it + * differs from the requested mode, warn the user. + */ + if (request != mode) + printf("WARNING device does not support requested mode 0x%x\n", + request); /* * bits per word diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c index 83ef55e3..2974b44 100644 --- a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c +++ b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c @@ -121,24 +121,24 @@ static void kprobe_multi_link_api_subtest(void) }) GET_ADDR("bpf_fentry_test1", addrs[0]); - GET_ADDR("bpf_fentry_test2", addrs[1]); - GET_ADDR("bpf_fentry_test3", addrs[2]); - GET_ADDR("bpf_fentry_test4", addrs[3]); - GET_ADDR("bpf_fentry_test5", addrs[4]); - GET_ADDR("bpf_fentry_test6", addrs[5]); - GET_ADDR("bpf_fentry_test7", addrs[6]); + GET_ADDR("bpf_fentry_test3", addrs[1]); + GET_ADDR("bpf_fentry_test4", addrs[2]); + GET_ADDR("bpf_fentry_test5", addrs[3]); + GET_ADDR("bpf_fentry_test6", addrs[4]); + GET_ADDR("bpf_fentry_test7", addrs[5]); + GET_ADDR("bpf_fentry_test2", addrs[6]); GET_ADDR("bpf_fentry_test8", addrs[7]); #undef GET_ADDR - cookies[0] = 1; - cookies[1] = 2; - cookies[2] = 3; - cookies[3] = 4; - cookies[4] = 5; - cookies[5] = 6; - cookies[6] = 7; - cookies[7] = 8; + cookies[0] = 1; /* bpf_fentry_test1 */ + cookies[1] = 2; /* bpf_fentry_test3 */ + cookies[2] = 3; /* bpf_fentry_test4 */ + cookies[3] = 4; /* bpf_fentry_test5 */ + cookies[4] = 5; /* bpf_fentry_test6 */ + cookies[5] = 6; /* bpf_fentry_test7 */ + cookies[6] = 7; /* bpf_fentry_test2 */ + cookies[7] = 8; /* bpf_fentry_test8 */ opts.kprobe_multi.addrs = (const unsigned long *) &addrs; opts.kprobe_multi.cnt = ARRAY_SIZE(addrs); @@ -149,14 +149,14 @@ static void kprobe_multi_link_api_subtest(void) if (!ASSERT_GE(link1_fd, 0, "link1_fd")) goto cleanup; - cookies[0] = 8; - cookies[1] = 7; - cookies[2] = 6; - cookies[3] = 5; - cookies[4] = 4; - cookies[5] = 3; - cookies[6] = 2; - cookies[7] = 1; + cookies[0] = 8; /* bpf_fentry_test1 */ + cookies[1] = 7; /* bpf_fentry_test3 */ + cookies[2] = 6; /* bpf_fentry_test4 */ + cookies[3] = 5; /* bpf_fentry_test5 */ + cookies[4] = 4; /* bpf_fentry_test6 */ + cookies[5] = 3; /* bpf_fentry_test7 */ + cookies[6] = 2; /* bpf_fentry_test2 */ + cookies[7] = 1; /* bpf_fentry_test8 */ opts.kprobe_multi.flags = BPF_F_KPROBE_MULTI_RETURN; prog_fd = bpf_program__fd(skel->progs.test_kretprobe); @@ -181,12 +181,12 @@ static void kprobe_multi_attach_api_subtest(void) struct kprobe_multi *skel = NULL; const char *syms[8] = { "bpf_fentry_test1", - "bpf_fentry_test2", "bpf_fentry_test3", "bpf_fentry_test4", "bpf_fentry_test5", "bpf_fentry_test6", "bpf_fentry_test7", + "bpf_fentry_test2", "bpf_fentry_test8", }; __u64 cookies[8]; @@ -198,14 +198,14 @@ static void kprobe_multi_attach_api_subtest(void) skel->bss->pid = getpid(); skel->bss->test_cookie = true; - cookies[0] = 1; - cookies[1] = 2; - cookies[2] = 3; - cookies[3] = 4; - cookies[4] = 5; - cookies[5] = 6; - cookies[6] = 7; - cookies[7] = 8; + cookies[0] = 1; /* bpf_fentry_test1 */ + cookies[1] = 2; /* bpf_fentry_test3 */ + cookies[2] = 3; /* bpf_fentry_test4 */ + cookies[3] = 4; /* bpf_fentry_test5 */ + cookies[4] = 5; /* bpf_fentry_test6 */ + cookies[5] = 6; /* bpf_fentry_test7 */ + cookies[6] = 7; /* bpf_fentry_test2 */ + cookies[7] = 8; /* bpf_fentry_test8 */ opts.syms = syms; opts.cnt = ARRAY_SIZE(syms); @@ -216,14 +216,14 @@ static void kprobe_multi_attach_api_subtest(void) if (!ASSERT_OK_PTR(link1, "bpf_program__attach_kprobe_multi_opts")) goto cleanup; - cookies[0] = 8; - cookies[1] = 7; - cookies[2] = 6; - cookies[3] = 5; - cookies[4] = 4; - cookies[5] = 3; - cookies[6] = 2; - cookies[7] = 1; + cookies[0] = 8; /* bpf_fentry_test1 */ + cookies[1] = 7; /* bpf_fentry_test3 */ + cookies[2] = 6; /* bpf_fentry_test4 */ + cookies[3] = 5; /* bpf_fentry_test5 */ + cookies[4] = 4; /* bpf_fentry_test6 */ + cookies[5] = 3; /* bpf_fentry_test7 */ + cookies[6] = 2; /* bpf_fentry_test2 */ + cookies[7] = 1; /* bpf_fentry_test8 */ opts.retprobe = true; diff --git a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c index d9aad15..02bb8cb 100644 --- a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c +++ b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c @@ -395,6 +395,18 @@ static void test_func_map_prog_compatibility(void) "./test_attach_probe.o"); } +static void test_func_replace_global_func(void) +{ + const char *prog_name[] = { + "freplace/test_pkt_access", + }; + + test_fexit_bpf2bpf_common("./freplace_global_func.o", + "./test_pkt_access.o", + ARRAY_SIZE(prog_name), + prog_name, false, NULL); +} + /* NOTE: affect other tests, must run in serial mode */ void serial_test_fexit_bpf2bpf(void) { @@ -416,4 +428,6 @@ void serial_test_fexit_bpf2bpf(void) test_func_replace_multi(); if (test__start_subtest("fmod_ret_freplace")) test_fmod_ret_freplace(); + if (test__start_subtest("func_replace_global_func")) + test_func_replace_global_func(); } diff --git a/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c b/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c index 586dc52..5b93d5d 100644 --- a/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c +++ b/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c @@ -364,6 +364,9 @@ static int get_syms(char ***symsp, size_t *cntp) continue; if (!strncmp(name, "rcu_", 4)) continue; + if (!strncmp(name, "__ftrace_invalid_address__", + sizeof("__ftrace_invalid_address__") - 1)) + continue; err = hashmap__add(map, name, NULL); if (err) { free(name); diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c b/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c index af293ea..e172d89 100644 --- a/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c +++ b/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c @@ -4,6 +4,7 @@ * Tests for sockmap/sockhash holding kTLS sockets. */ +#include #include "test_progs.h" #define MAX_TEST_NAME 80 @@ -92,9 +93,78 @@ close_srv: close(srv); } +static void test_sockmap_ktls_update_fails_when_sock_has_ulp(int family, int map) +{ + struct sockaddr_storage addr = {}; + socklen_t len = sizeof(addr); + struct sockaddr_in6 *v6; + struct sockaddr_in *v4; + int err, s, zero = 0; + + switch (family) { + case AF_INET: + v4 = (struct sockaddr_in *)&addr; + v4->sin_family = AF_INET; + break; + case AF_INET6: + v6 = (struct sockaddr_in6 *)&addr; + v6->sin6_family = AF_INET6; + break; + default: + PRINT_FAIL("unsupported socket family %d", family); + return; + } + + s = socket(family, SOCK_STREAM, 0); + if (!ASSERT_GE(s, 0, "socket")) + return; + + err = bind(s, (struct sockaddr *)&addr, len); + if (!ASSERT_OK(err, "bind")) + goto close; + + err = getsockname(s, (struct sockaddr *)&addr, &len); + if (!ASSERT_OK(err, "getsockname")) + goto close; + + err = connect(s, (struct sockaddr *)&addr, len); + if (!ASSERT_OK(err, "connect")) + goto close; + + /* save sk->sk_prot and set it to tls_prots */ + err = setsockopt(s, IPPROTO_TCP, TCP_ULP, "tls", strlen("tls")); + if (!ASSERT_OK(err, "setsockopt(TCP_ULP)")) + goto close; + + /* sockmap update should not affect saved sk_prot */ + err = bpf_map_update_elem(map, &zero, &s, BPF_ANY); + if (!ASSERT_ERR(err, "sockmap update elem")) + goto close; + + /* call sk->sk_prot->setsockopt to dispatch to saved sk_prot */ + err = setsockopt(s, IPPROTO_TCP, TCP_NODELAY, &zero, sizeof(zero)); + ASSERT_OK(err, "setsockopt(TCP_NODELAY)"); + +close: + close(s); +} + +static const char *fmt_test_name(const char *subtest_name, int family, + enum bpf_map_type map_type) +{ + const char *map_type_str = BPF_MAP_TYPE_SOCKMAP ? "SOCKMAP" : "SOCKHASH"; + const char *family_str = AF_INET ? "IPv4" : "IPv6"; + static char test_name[MAX_TEST_NAME]; + + snprintf(test_name, MAX_TEST_NAME, + "sockmap_ktls %s %s %s", + subtest_name, family_str, map_type_str); + + return test_name; +} + static void run_tests(int family, enum bpf_map_type map_type) { - char test_name[MAX_TEST_NAME]; int map; map = bpf_map_create(map_type, NULL, sizeof(int), sizeof(int), 1, NULL); @@ -103,14 +173,10 @@ static void run_tests(int family, enum bpf_map_type map_type) return; } - snprintf(test_name, MAX_TEST_NAME, - "sockmap_ktls disconnect_after_delete %s %s", - family == AF_INET ? "IPv4" : "IPv6", - map_type == BPF_MAP_TYPE_SOCKMAP ? "SOCKMAP" : "SOCKHASH"); - if (!test__start_subtest(test_name)) - return; - - test_sockmap_ktls_disconnect_after_delete(family, map); + if (test__start_subtest(fmt_test_name("disconnect_after_delete", family, map_type))) + test_sockmap_ktls_disconnect_after_delete(family, map); + if (test__start_subtest(fmt_test_name("update_fails_when_sock_has_ulp", family, map_type))) + test_sockmap_ktls_update_fails_when_sock_has_ulp(family, map); close(map); } diff --git a/tools/testing/selftests/bpf/prog_tests/tailcalls.c b/tools/testing/selftests/bpf/prog_tests/tailcalls.c index c4da87e..19c7088 100644 --- a/tools/testing/selftests/bpf/prog_tests/tailcalls.c +++ b/tools/testing/selftests/bpf/prog_tests/tailcalls.c @@ -831,6 +831,59 @@ out: bpf_object__close(obj); } +#include "tailcall_bpf2bpf6.skel.h" + +/* Tail call counting works even when there is data on stack which is + * not aligned to 8 bytes. + */ +static void test_tailcall_bpf2bpf_6(void) +{ + struct tailcall_bpf2bpf6 *obj; + int err, map_fd, prog_fd, main_fd, data_fd, i, val; + LIBBPF_OPTS(bpf_test_run_opts, topts, + .data_in = &pkt_v4, + .data_size_in = sizeof(pkt_v4), + .repeat = 1, + ); + + obj = tailcall_bpf2bpf6__open_and_load(); + if (!ASSERT_OK_PTR(obj, "open and load")) + return; + + main_fd = bpf_program__fd(obj->progs.entry); + if (!ASSERT_GE(main_fd, 0, "entry prog fd")) + goto out; + + map_fd = bpf_map__fd(obj->maps.jmp_table); + if (!ASSERT_GE(map_fd, 0, "jmp_table map fd")) + goto out; + + prog_fd = bpf_program__fd(obj->progs.classifier_0); + if (!ASSERT_GE(prog_fd, 0, "classifier_0 prog fd")) + goto out; + + i = 0; + err = bpf_map_update_elem(map_fd, &i, &prog_fd, BPF_ANY); + if (!ASSERT_OK(err, "jmp_table map update")) + goto out; + + err = bpf_prog_test_run_opts(main_fd, &topts); + ASSERT_OK(err, "entry prog test run"); + ASSERT_EQ(topts.retval, 0, "tailcall retval"); + + data_fd = bpf_map__fd(obj->maps.bss); + if (!ASSERT_GE(map_fd, 0, "bss map fd")) + goto out; + + i = 0; + err = bpf_map_lookup_elem(data_fd, &i, &val); + ASSERT_OK(err, "bss map lookup"); + ASSERT_EQ(val, 1, "done flag is set"); + +out: + tailcall_bpf2bpf6__destroy(obj); +} + void test_tailcalls(void) { if (test__start_subtest("tailcall_1")) @@ -855,4 +908,6 @@ void test_tailcalls(void) test_tailcall_bpf2bpf_4(false); if (test__start_subtest("tailcall_bpf2bpf_5")) test_tailcall_bpf2bpf_4(true); + if (test__start_subtest("tailcall_bpf2bpf_6")) + test_tailcall_bpf2bpf_6(); } diff --git a/tools/testing/selftests/bpf/progs/dynptr_fail.c b/tools/testing/selftests/bpf/progs/dynptr_fail.c index d811cff..0a26c24 100644 --- a/tools/testing/selftests/bpf/progs/dynptr_fail.c +++ b/tools/testing/selftests/bpf/progs/dynptr_fail.c @@ -140,12 +140,12 @@ int use_after_invalid(void *ctx) bpf_ringbuf_reserve_dynptr(&ringbuf, sizeof(read_data), 0, &ptr); - bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0); + bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0, 0); bpf_ringbuf_submit_dynptr(&ptr, 0); /* this should fail */ - bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0); + bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0, 0); return 0; } @@ -338,7 +338,7 @@ int invalid_helper2(void *ctx) get_map_val_dynptr(&ptr); /* this should fail */ - bpf_dynptr_read(read_data, sizeof(read_data), (void *)&ptr + 8, 0); + bpf_dynptr_read(read_data, sizeof(read_data), (void *)&ptr + 8, 0, 0); return 0; } @@ -377,7 +377,7 @@ int invalid_write2(void *ctx) memcpy((void *)&ptr + 8, &x, sizeof(x)); /* this should fail */ - bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0); + bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0, 0); bpf_ringbuf_submit_dynptr(&ptr, 0); @@ -473,7 +473,7 @@ int invalid_read2(void *ctx) get_map_val_dynptr(&ptr); /* this should fail */ - bpf_dynptr_read(read_data, sizeof(read_data), (void *)&ptr + 1, 0); + bpf_dynptr_read(read_data, sizeof(read_data), (void *)&ptr + 1, 0, 0); return 0; } diff --git a/tools/testing/selftests/bpf/progs/dynptr_success.c b/tools/testing/selftests/bpf/progs/dynptr_success.c index d67be48..a3a6103 100644 --- a/tools/testing/selftests/bpf/progs/dynptr_success.c +++ b/tools/testing/selftests/bpf/progs/dynptr_success.c @@ -43,10 +43,10 @@ int test_read_write(void *ctx) bpf_ringbuf_reserve_dynptr(&ringbuf, sizeof(write_data), 0, &ptr); /* Write data into the dynptr */ - err = err ?: bpf_dynptr_write(&ptr, 0, write_data, sizeof(write_data)); + err = bpf_dynptr_write(&ptr, 0, write_data, sizeof(write_data), 0); /* Read the data that was written into the dynptr */ - err = err ?: bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0); + err = err ?: bpf_dynptr_read(read_data, sizeof(read_data), &ptr, 0, 0); /* Ensure the data we read matches the data we wrote */ for (i = 0; i < sizeof(read_data); i++) { diff --git a/tools/testing/selftests/bpf/progs/freplace_global_func.c b/tools/testing/selftests/bpf/progs/freplace_global_func.c new file mode 100644 index 0000000..96cb61a --- /dev/null +++ b/tools/testing/selftests/bpf/progs/freplace_global_func.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include + +__noinline +int test_ctx_global_func(struct __sk_buff *skb) +{ + volatile int retval = 1; + return retval; +} + +SEC("freplace/test_pkt_access") +int new_test_pkt_access(struct __sk_buff *skb) +{ + return test_ctx_global_func(skb); +} + +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/kprobe_multi.c b/tools/testing/selftests/bpf/progs/kprobe_multi.c index 93510f4..08f95a8 100644 --- a/tools/testing/selftests/bpf/progs/kprobe_multi.c +++ b/tools/testing/selftests/bpf/progs/kprobe_multi.c @@ -54,21 +54,21 @@ static void kprobe_multi_check(void *ctx, bool is_return) if (is_return) { SET(kretprobe_test1_result, &bpf_fentry_test1, 8); - SET(kretprobe_test2_result, &bpf_fentry_test2, 7); - SET(kretprobe_test3_result, &bpf_fentry_test3, 6); - SET(kretprobe_test4_result, &bpf_fentry_test4, 5); - SET(kretprobe_test5_result, &bpf_fentry_test5, 4); - SET(kretprobe_test6_result, &bpf_fentry_test6, 3); - SET(kretprobe_test7_result, &bpf_fentry_test7, 2); + SET(kretprobe_test2_result, &bpf_fentry_test2, 2); + SET(kretprobe_test3_result, &bpf_fentry_test3, 7); + SET(kretprobe_test4_result, &bpf_fentry_test4, 6); + SET(kretprobe_test5_result, &bpf_fentry_test5, 5); + SET(kretprobe_test6_result, &bpf_fentry_test6, 4); + SET(kretprobe_test7_result, &bpf_fentry_test7, 3); SET(kretprobe_test8_result, &bpf_fentry_test8, 1); } else { SET(kprobe_test1_result, &bpf_fentry_test1, 1); - SET(kprobe_test2_result, &bpf_fentry_test2, 2); - SET(kprobe_test3_result, &bpf_fentry_test3, 3); - SET(kprobe_test4_result, &bpf_fentry_test4, 4); - SET(kprobe_test5_result, &bpf_fentry_test5, 5); - SET(kprobe_test6_result, &bpf_fentry_test6, 6); - SET(kprobe_test7_result, &bpf_fentry_test7, 7); + SET(kprobe_test2_result, &bpf_fentry_test2, 7); + SET(kprobe_test3_result, &bpf_fentry_test3, 2); + SET(kprobe_test4_result, &bpf_fentry_test4, 3); + SET(kprobe_test5_result, &bpf_fentry_test5, 4); + SET(kprobe_test6_result, &bpf_fentry_test6, 5); + SET(kprobe_test7_result, &bpf_fentry_test7, 6); SET(kprobe_test8_result, &bpf_fentry_test8, 8); } diff --git a/tools/testing/selftests/bpf/progs/tailcall_bpf2bpf6.c b/tools/testing/selftests/bpf/progs/tailcall_bpf2bpf6.c new file mode 100644 index 0000000..41ce83d --- /dev/null +++ b/tools/testing/selftests/bpf/progs/tailcall_bpf2bpf6.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include + +#define __unused __attribute__((unused)) + +struct { + __uint(type, BPF_MAP_TYPE_PROG_ARRAY); + __uint(max_entries, 1); + __uint(key_size, sizeof(__u32)); + __uint(value_size, sizeof(__u32)); +} jmp_table SEC(".maps"); + +int done = 0; + +SEC("tc") +int classifier_0(struct __sk_buff *skb __unused) +{ + done = 1; + return 0; +} + +static __noinline +int subprog_tail(struct __sk_buff *skb) +{ + /* Don't propagate the constant to the caller */ + volatile int ret = 1; + + bpf_tail_call_static(skb, &jmp_table, 0); + return ret; +} + +SEC("tc") +int entry(struct __sk_buff *skb) +{ + /* Have data on stack which size is not a multiple of 8 */ + volatile char arr[1] = {}; + + return subprog_tail(skb); +} + +char __license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/verifier/jmp32.c b/tools/testing/selftests/bpf/verifier/jmp32.c index 6ddc418..1a27a62 100644 --- a/tools/testing/selftests/bpf/verifier/jmp32.c +++ b/tools/testing/selftests/bpf/verifier/jmp32.c @@ -864,3 +864,24 @@ .result = ACCEPT, .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, }, +{ + "jeq32/jne32: bounds checking", + .insns = { + BPF_MOV64_IMM(BPF_REG_6, 563), + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0), + BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0), + BPF_ALU32_REG(BPF_OR, BPF_REG_2, BPF_REG_6), + BPF_JMP32_IMM(BPF_JNE, BPF_REG_2, 8, 5), + BPF_JMP_IMM(BPF_JSGE, BPF_REG_2, 500, 2), + BPF_MOV64_IMM(BPF_REG_0, 2), + BPF_EXIT_INSN(), + BPF_MOV64_REG(BPF_REG_0, BPF_REG_4), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + .retval = 1, +}, diff --git a/tools/testing/selftests/bpf/verifier/jump.c b/tools/testing/selftests/bpf/verifier/jump.c index 6f951d1..497fe17 100644 --- a/tools/testing/selftests/bpf/verifier/jump.c +++ b/tools/testing/selftests/bpf/verifier/jump.c @@ -373,3 +373,25 @@ .result = ACCEPT, .retval = 3, }, +{ + "jump & dead code elimination", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_ALU64_IMM(BPF_NEG, BPF_REG_3, 0), + BPF_ALU64_IMM(BPF_NEG, BPF_REG_3, 0), + BPF_ALU64_IMM(BPF_OR, BPF_REG_3, 32767), + BPF_JMP_IMM(BPF_JSGE, BPF_REG_3, 0, 1), + BPF_EXIT_INSN(), + BPF_JMP_IMM(BPF_JSLE, BPF_REG_3, 0x8000, 1), + BPF_EXIT_INSN(), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, -32767), + BPF_MOV64_IMM(BPF_REG_0, 2), + BPF_JMP_IMM(BPF_JLE, BPF_REG_3, 0, 1), + BPF_MOV64_REG(BPF_REG_0, BPF_REG_4), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + .retval = 2, +}, diff --git a/tools/testing/selftests/dma/Makefile b/tools/testing/selftests/dma/Makefile index aa8e8b5..cd8c5ec 100644 --- a/tools/testing/selftests/dma/Makefile +++ b/tools/testing/selftests/dma/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 CFLAGS += -I../../../../usr/include/ +CFLAGS += -I../../../../include/ TEST_GEN_PROGS := dma_map_benchmark diff --git a/tools/testing/selftests/dma/dma_map_benchmark.c b/tools/testing/selftests/dma/dma_map_benchmark.c index c3b3c09..5c997f1 100644 --- a/tools/testing/selftests/dma/dma_map_benchmark.c +++ b/tools/testing/selftests/dma/dma_map_benchmark.c @@ -10,8 +10,8 @@ #include #include #include -#include #include +#include #define NSEC_PER_MSEC 1000000L diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile index 71b3066..616ed40 100644 --- a/tools/testing/selftests/gpio/Makefile +++ b/tools/testing/selftests/gpio/Makefile @@ -3,6 +3,6 @@ TEST_PROGS := gpio-mockup.sh gpio-sim.sh TEST_FILES := gpio-mockup-sysfs.sh TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev gpio-chip-info gpio-line-name -CFLAGS += -O2 -g -Wall -I../../../../usr/include/ +CFLAGS += -O2 -g -Wall -I../../../../usr/include/ $(KHDR_INCLUDES) include ../lib.mk diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 81470a9..22423c8 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -37,11 +37,38 @@ ifeq ($(ARCH),riscv) UNAME_M := riscv endif -LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/rbtree.c lib/sparsebit.c lib/test_util.c lib/guest_modes.c lib/perf_test_util.c -LIBKVM_x86_64 = lib/x86_64/apic.c lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c lib/x86_64/handlers.S -LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c lib/aarch64/vgic.c -LIBKVM_s390x = lib/s390x/processor.c lib/s390x/ucall.c lib/s390x/diag318_test_handler.c -LIBKVM_riscv = lib/riscv/processor.c lib/riscv/ucall.c +LIBKVM += lib/assert.c +LIBKVM += lib/elf.c +LIBKVM += lib/guest_modes.c +LIBKVM += lib/io.c +LIBKVM += lib/kvm_util.c +LIBKVM += lib/perf_test_util.c +LIBKVM += lib/rbtree.c +LIBKVM += lib/sparsebit.c +LIBKVM += lib/test_util.c + +LIBKVM_x86_64 += lib/x86_64/apic.c +LIBKVM_x86_64 += lib/x86_64/handlers.S +LIBKVM_x86_64 += lib/x86_64/perf_test_util.c +LIBKVM_x86_64 += lib/x86_64/processor.c +LIBKVM_x86_64 += lib/x86_64/svm.c +LIBKVM_x86_64 += lib/x86_64/ucall.c +LIBKVM_x86_64 += lib/x86_64/vmx.c + +LIBKVM_aarch64 += lib/aarch64/gic.c +LIBKVM_aarch64 += lib/aarch64/gic_v3.c +LIBKVM_aarch64 += lib/aarch64/handlers.S +LIBKVM_aarch64 += lib/aarch64/processor.c +LIBKVM_aarch64 += lib/aarch64/spinlock.c +LIBKVM_aarch64 += lib/aarch64/ucall.c +LIBKVM_aarch64 += lib/aarch64/vgic.c + +LIBKVM_s390x += lib/s390x/diag318_test_handler.c +LIBKVM_s390x += lib/s390x/processor.c +LIBKVM_s390x += lib/s390x/ucall.c + +LIBKVM_riscv += lib/riscv/processor.c +LIBKVM_riscv += lib/riscv/ucall.c TEST_GEN_PROGS_x86_64 = x86_64/cpuid_test TEST_GEN_PROGS_x86_64 += x86_64/cr4_cpuid_sync_test @@ -173,12 +200,13 @@ LDFLAGS += -pthread $(no-pie-option) $(pgste-option) # $(TEST_GEN_PROGS) starts with $(OUTPUT)/ include ../lib.mk -STATIC_LIBS := $(OUTPUT)/libkvm.a LIBKVM_C := $(filter %.c,$(LIBKVM)) LIBKVM_S := $(filter %.S,$(LIBKVM)) LIBKVM_C_OBJ := $(patsubst %.c, $(OUTPUT)/%.o, $(LIBKVM_C)) LIBKVM_S_OBJ := $(patsubst %.S, $(OUTPUT)/%.o, $(LIBKVM_S)) -EXTRA_CLEAN += $(LIBKVM_C_OBJ) $(LIBKVM_S_OBJ) $(STATIC_LIBS) cscope.* +LIBKVM_OBJS = $(LIBKVM_C_OBJ) $(LIBKVM_S_OBJ) + +EXTRA_CLEAN += $(LIBKVM_OBJS) cscope.* x := $(shell mkdir -p $(sort $(dir $(LIBKVM_C_OBJ) $(LIBKVM_S_OBJ)))) $(LIBKVM_C_OBJ): $(OUTPUT)/%.o: %.c @@ -187,13 +215,8 @@ $(LIBKVM_C_OBJ): $(OUTPUT)/%.o: %.c $(LIBKVM_S_OBJ): $(OUTPUT)/%.o: %.S $(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c $< -o $@ -LIBKVM_OBJS = $(LIBKVM_C_OBJ) $(LIBKVM_S_OBJ) -$(OUTPUT)/libkvm.a: $(LIBKVM_OBJS) - $(AR) crs $@ $^ - x := $(shell mkdir -p $(sort $(dir $(TEST_GEN_PROGS)))) -all: $(STATIC_LIBS) -$(TEST_GEN_PROGS): $(STATIC_LIBS) +$(TEST_GEN_PROGS): $(LIBKVM_OBJS) cscope: include_paths = $(LINUX_TOOL_INCLUDE) $(LINUX_HDR_PATH) include lib .. cscope: diff --git a/tools/testing/selftests/kvm/dirty_log_perf_test.c b/tools/testing/selftests/kvm/dirty_log_perf_test.c index 7b47ae4..d60a34c 100644 --- a/tools/testing/selftests/kvm/dirty_log_perf_test.c +++ b/tools/testing/selftests/kvm/dirty_log_perf_test.c @@ -336,8 +336,8 @@ static void run_test(enum vm_guest_mode mode, void *arg) static void help(char *name) { puts(""); - printf("usage: %s [-h] [-i iterations] [-p offset] [-g]" - "[-m mode] [-b vcpu bytes] [-v vcpus] [-o] [-s mem type]" + printf("usage: %s [-h] [-i iterations] [-p offset] [-g] " + "[-m mode] [-n] [-b vcpu bytes] [-v vcpus] [-o] [-s mem type]" "[-x memslots]\n", name); puts(""); printf(" -i: specify iteration counts (default: %"PRIu64")\n", @@ -351,6 +351,7 @@ static void help(char *name) printf(" -p: specify guest physical test memory offset\n" " Warning: a low offset can conflict with the loaded test code.\n"); guest_modes_help(); + printf(" -n: Run the vCPUs in nested mode (L2)\n"); printf(" -b: specify the size of the memory region which should be\n" " dirtied by each vCPU. e.g. 10M or 3G.\n" " (default: 1G)\n"); @@ -387,7 +388,7 @@ int main(int argc, char *argv[]) guest_modes_append_default(); - while ((opt = getopt(argc, argv, "ghi:p:m:b:f:v:os:x:")) != -1) { + while ((opt = getopt(argc, argv, "ghi:p:m:nb:f:v:os:x:")) != -1) { switch (opt) { case 'g': dirty_log_manual_caps = 0; @@ -401,6 +402,9 @@ int main(int argc, char *argv[]) case 'm': guest_modes_cmdline(optarg); break; + case 'n': + perf_test_args.nested = true; + break; case 'b': guest_percpu_mem_size = parse_size(optarg); break; diff --git a/tools/testing/selftests/kvm/include/perf_test_util.h b/tools/testing/selftests/kvm/include/perf_test_util.h index a86f953..d822cb6 100644 --- a/tools/testing/selftests/kvm/include/perf_test_util.h +++ b/tools/testing/selftests/kvm/include/perf_test_util.h @@ -30,10 +30,15 @@ struct perf_test_vcpu_args { struct perf_test_args { struct kvm_vm *vm; + /* The starting address and size of the guest test region. */ uint64_t gpa; + uint64_t size; uint64_t guest_page_size; int wr_fract; + /* Run vCPUs in L2 instead of L1, if the architecture supports it. */ + bool nested; + struct perf_test_vcpu_args vcpu_args[KVM_MAX_VCPUS]; }; @@ -49,5 +54,9 @@ void perf_test_set_wr_fract(struct kvm_vm *vm, int wr_fract); void perf_test_start_vcpu_threads(int vcpus, void (*vcpu_fn)(struct perf_test_vcpu_args *)); void perf_test_join_vcpu_threads(int vcpus); +void perf_test_guest_code(uint32_t vcpu_id); + +uint64_t perf_test_nested_pages(int nr_vcpus); +void perf_test_setup_nested(struct kvm_vm *vm, int nr_vcpus); #endif /* SELFTEST_KVM_PERF_TEST_UTIL_H */ diff --git a/tools/testing/selftests/kvm/include/x86_64/processor.h b/tools/testing/selftests/kvm/include/x86_64/processor.h index d0d51ad..6ce1854 100644 --- a/tools/testing/selftests/kvm/include/x86_64/processor.h +++ b/tools/testing/selftests/kvm/include/x86_64/processor.h @@ -482,13 +482,23 @@ void vcpu_set_hv_cpuid(struct kvm_vm *vm, uint32_t vcpuid); struct kvm_cpuid2 *vcpu_get_supported_hv_cpuid(struct kvm_vm *vm, uint32_t vcpuid); void vm_xsave_req_perm(int bit); -enum x86_page_size { - X86_PAGE_SIZE_4K = 0, - X86_PAGE_SIZE_2M, - X86_PAGE_SIZE_1G, +enum pg_level { + PG_LEVEL_NONE, + PG_LEVEL_4K, + PG_LEVEL_2M, + PG_LEVEL_1G, + PG_LEVEL_512G, + PG_LEVEL_NUM }; -void __virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, - enum x86_page_size page_size); + +#define PG_LEVEL_SHIFT(_level) ((_level - 1) * 9 + 12) +#define PG_LEVEL_SIZE(_level) (1ull << PG_LEVEL_SHIFT(_level)) + +#define PG_SIZE_4K PG_LEVEL_SIZE(PG_LEVEL_4K) +#define PG_SIZE_2M PG_LEVEL_SIZE(PG_LEVEL_2M) +#define PG_SIZE_1G PG_LEVEL_SIZE(PG_LEVEL_1G) + +void __virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, int level); /* * Basic CPU control in CR0 @@ -505,9 +515,6 @@ void __virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, #define X86_CR0_CD (1UL<<30) /* Cache Disable */ #define X86_CR0_PG (1UL<<31) /* Paging */ -/* VMX_EPT_VPID_CAP bits */ -#define VMX_EPT_VPID_CAP_AD_BITS (1ULL << 21) - #define XSTATE_XTILE_CFG_BIT 17 #define XSTATE_XTILE_DATA_BIT 18 diff --git a/tools/testing/selftests/kvm/include/x86_64/vmx.h b/tools/testing/selftests/kvm/include/x86_64/vmx.h index 583ceb0..cc3604f 100644 --- a/tools/testing/selftests/kvm/include/x86_64/vmx.h +++ b/tools/testing/selftests/kvm/include/x86_64/vmx.h @@ -96,6 +96,9 @@ #define VMX_MISC_PREEMPTION_TIMER_RATE_MASK 0x0000001f #define VMX_MISC_SAVE_EFER_LMA 0x00000020 +#define VMX_EPT_VPID_CAP_1G_PAGES 0x00020000 +#define VMX_EPT_VPID_CAP_AD_BITS 0x00200000 + #define EXIT_REASON_FAILED_VMENTRY 0x80000000 #define EXIT_REASON_EXCEPTION_NMI 0 #define EXIT_REASON_EXTERNAL_INTERRUPT 1 @@ -606,6 +609,7 @@ bool load_vmcs(struct vmx_pages *vmx); bool nested_vmx_supported(void); void nested_vmx_check_supported(void); +bool ept_1g_pages_supported(void); void nested_pg_map(struct vmx_pages *vmx, struct kvm_vm *vm, uint64_t nested_paddr, uint64_t paddr); @@ -613,6 +617,8 @@ void nested_map(struct vmx_pages *vmx, struct kvm_vm *vm, uint64_t nested_paddr, uint64_t paddr, uint64_t size); void nested_map_memslot(struct vmx_pages *vmx, struct kvm_vm *vm, uint32_t memslot); +void nested_identity_map_1g(struct vmx_pages *vmx, struct kvm_vm *vm, + uint64_t addr, uint64_t size); void prepare_eptp(struct vmx_pages *vmx, struct kvm_vm *vm, uint32_t eptp_memslot); void prepare_virtualize_apic_accesses(struct vmx_pages *vmx, struct kvm_vm *vm); diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index e0b0164..be1d972 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) diff --git a/tools/testing/selftests/kvm/lib/perf_test_util.c b/tools/testing/selftests/kvm/lib/perf_test_util.c index 722df3a..f989ff9 100644 --- a/tools/testing/selftests/kvm/lib/perf_test_util.c +++ b/tools/testing/selftests/kvm/lib/perf_test_util.c @@ -40,7 +40,7 @@ static bool all_vcpu_threads_running; * Continuously write to the first 8 bytes of each page in the * specified region. */ -static void guest_code(uint32_t vcpu_id) +void perf_test_guest_code(uint32_t vcpu_id) { struct perf_test_args *pta = &perf_test_args; struct perf_test_vcpu_args *vcpu_args = &pta->vcpu_args[vcpu_id]; @@ -108,8 +108,9 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus, { struct perf_test_args *pta = &perf_test_args; struct kvm_vm *vm; - uint64_t guest_num_pages; + uint64_t guest_num_pages, slot0_pages = DEFAULT_GUEST_PHY_PAGES; uint64_t backing_src_pagesz = get_backing_src_pagesz(backing_src); + uint64_t region_end_gfn; int i; pr_info("Testing guest mode: %s\n", vm_guest_mode_string(mode)); @@ -135,33 +136,53 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus, slots); /* + * If using nested, allocate extra pages for the nested page tables and + * in-memory data structures. + */ + if (pta->nested) + slot0_pages += perf_test_nested_pages(vcpus); + + /* * Pass guest_num_pages to populate the page tables for test memory. * The memory is also added to memslot 0, but that's a benign side * effect as KVM allows aliasing HVAs in meslots. */ - vm = vm_create_with_vcpus(mode, vcpus, DEFAULT_GUEST_PHY_PAGES, - guest_num_pages, 0, guest_code, NULL); + vm = vm_create_with_vcpus(mode, vcpus, slot0_pages, guest_num_pages, 0, + perf_test_guest_code, NULL); pta->vm = vm; + /* Put the test region at the top guest physical memory. */ + region_end_gfn = vm_get_max_gfn(vm) + 1; + +#ifdef __x86_64__ + /* + * When running vCPUs in L2, restrict the test region to 48 bits to + * avoid needing 5-level page tables to identity map L2. + */ + if (pta->nested) + region_end_gfn = min(region_end_gfn, (1UL << 48) / pta->guest_page_size); +#endif /* * If there should be more memory in the guest test region than there * can be pages in the guest, it will definitely cause problems. */ - TEST_ASSERT(guest_num_pages < vm_get_max_gfn(vm), + TEST_ASSERT(guest_num_pages < region_end_gfn, "Requested more guest memory than address space allows.\n" " guest pages: %" PRIx64 " max gfn: %" PRIx64 " vcpus: %d wss: %" PRIx64 "]\n", - guest_num_pages, vm_get_max_gfn(vm), vcpus, + guest_num_pages, region_end_gfn - 1, vcpus, vcpu_memory_bytes); - pta->gpa = (vm_get_max_gfn(vm) - guest_num_pages) * pta->guest_page_size; + pta->gpa = (region_end_gfn - guest_num_pages) * pta->guest_page_size; pta->gpa = align_down(pta->gpa, backing_src_pagesz); #ifdef __s390x__ /* Align to 1M (segment size) */ pta->gpa = align_down(pta->gpa, 1 << 20); #endif - pr_info("guest physical test memory offset: 0x%lx\n", pta->gpa); + pta->size = guest_num_pages * pta->guest_page_size; + pr_info("guest physical test memory: [0x%lx, 0x%lx)\n", + pta->gpa, pta->gpa + pta->size); /* Add extra memory slots for testing */ for (i = 0; i < slots; i++) { @@ -178,6 +199,11 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus, perf_test_setup_vcpus(vm, vcpus, vcpu_memory_bytes, partition_vcpu_memory_access); + if (pta->nested) { + pr_info("Configuring vCPUs to run in L2 (nested).\n"); + perf_test_setup_nested(vm, vcpus); + } + ucall_init(vm, NULL); /* Export the shared variables to the guest. */ @@ -198,6 +224,17 @@ void perf_test_set_wr_fract(struct kvm_vm *vm, int wr_fract) sync_global_to_guest(vm, perf_test_args); } +uint64_t __weak perf_test_nested_pages(int nr_vcpus) +{ + return 0; +} + +void __weak perf_test_setup_nested(struct kvm_vm *vm, int nr_vcpus) +{ + pr_info("%s() not support on this architecture, skipping.\n", __func__); + exit(KSFT_SKIP); +} + static void *vcpu_thread_main(void *data) { struct vcpu_thread *vcpu = data; diff --git a/tools/testing/selftests/kvm/lib/x86_64/perf_test_util.c b/tools/testing/selftests/kvm/lib/x86_64/perf_test_util.c new file mode 100644 index 0000000..e258524 --- /dev/null +++ b/tools/testing/selftests/kvm/lib/x86_64/perf_test_util.c @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * x86_64-specific extensions to perf_test_util.c. + * + * Copyright (C) 2022, Google, Inc. + */ +#include +#include +#include +#include + +#include "test_util.h" +#include "kvm_util.h" +#include "perf_test_util.h" +#include "../kvm_util_internal.h" +#include "processor.h" +#include "vmx.h" + +void perf_test_l2_guest_code(uint64_t vcpu_id) +{ + perf_test_guest_code(vcpu_id); + vmcall(); +} + +extern char perf_test_l2_guest_entry[]; +__asm__( +"perf_test_l2_guest_entry:" +" mov (%rsp), %rdi;" +" call perf_test_l2_guest_code;" +" ud2;" +); + +static void perf_test_l1_guest_code(struct vmx_pages *vmx, uint64_t vcpu_id) +{ +#define L2_GUEST_STACK_SIZE 64 + unsigned long l2_guest_stack[L2_GUEST_STACK_SIZE]; + unsigned long *rsp; + + GUEST_ASSERT(vmx->vmcs_gpa); + GUEST_ASSERT(prepare_for_vmx_operation(vmx)); + GUEST_ASSERT(load_vmcs(vmx)); + GUEST_ASSERT(ept_1g_pages_supported()); + + rsp = &l2_guest_stack[L2_GUEST_STACK_SIZE - 1]; + *rsp = vcpu_id; + prepare_vmcs(vmx, perf_test_l2_guest_entry, rsp); + + GUEST_ASSERT(!vmlaunch()); + GUEST_ASSERT(vmreadz(VM_EXIT_REASON) == EXIT_REASON_VMCALL); + GUEST_DONE(); +} + +uint64_t perf_test_nested_pages(int nr_vcpus) +{ + /* + * 513 page tables is enough to identity-map 256 TiB of L2 with 1G + * pages and 4-level paging, plus a few pages per-vCPU for data + * structures such as the VMCS. + */ + return 513 + 10 * nr_vcpus; +} + +void perf_test_setup_ept(struct vmx_pages *vmx, struct kvm_vm *vm) +{ + uint64_t start, end; + + prepare_eptp(vmx, vm, 0); + + /* + * Identity map the first 4G and the test region with 1G pages so that + * KVM can shadow the EPT12 with the maximum huge page size supported + * by the backing source. + */ + nested_identity_map_1g(vmx, vm, 0, 0x100000000ULL); + + start = align_down(perf_test_args.gpa, PG_SIZE_1G); + end = align_up(perf_test_args.gpa + perf_test_args.size, PG_SIZE_1G); + nested_identity_map_1g(vmx, vm, start, end - start); +} + +void perf_test_setup_nested(struct kvm_vm *vm, int nr_vcpus) +{ + struct vmx_pages *vmx, *vmx0 = NULL; + struct kvm_regs regs; + vm_vaddr_t vmx_gva; + int vcpu_id; + + nested_vmx_check_supported(); + + for (vcpu_id = 0; vcpu_id < nr_vcpus; vcpu_id++) { + vmx = vcpu_alloc_vmx(vm, &vmx_gva); + + if (vcpu_id == 0) { + perf_test_setup_ept(vmx, vm); + vmx0 = vmx; + } else { + /* Share the same EPT table across all vCPUs. */ + vmx->eptp = vmx0->eptp; + vmx->eptp_hva = vmx0->eptp_hva; + vmx->eptp_gpa = vmx0->eptp_gpa; + } + + /* + * Override the vCPU to run perf_test_l1_guest_code() which will + * bounce it into L2 before calling perf_test_guest_code(). + */ + vcpu_regs_get(vm, vcpu_id, ®s); + regs.rip = (unsigned long) perf_test_l1_guest_code; + vcpu_regs_set(vm, vcpu_id, ®s); + vcpu_args_set(vm, vcpu_id, 2, vmx_gva, vcpu_id); + } +} diff --git a/tools/testing/selftests/kvm/lib/x86_64/processor.c b/tools/testing/selftests/kvm/lib/x86_64/processor.c index 33ea5e9..ead7011 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/processor.c +++ b/tools/testing/selftests/kvm/lib/x86_64/processor.c @@ -158,7 +158,7 @@ static void *virt_get_pte(struct kvm_vm *vm, uint64_t pt_pfn, uint64_t vaddr, int level) { uint64_t *page_table = addr_gpa2hva(vm, pt_pfn << vm->page_shift); - int index = vaddr >> (vm->page_shift + level * 9) & 0x1ffu; + int index = (vaddr >> PG_LEVEL_SHIFT(level)) & 0x1ffu; return &page_table[index]; } @@ -167,14 +167,14 @@ static uint64_t *virt_create_upper_pte(struct kvm_vm *vm, uint64_t pt_pfn, uint64_t vaddr, uint64_t paddr, - int level, - enum x86_page_size page_size) + int current_level, + int target_level) { - uint64_t *pte = virt_get_pte(vm, pt_pfn, vaddr, level); + uint64_t *pte = virt_get_pte(vm, pt_pfn, vaddr, current_level); if (!(*pte & PTE_PRESENT_MASK)) { *pte = PTE_PRESENT_MASK | PTE_WRITABLE_MASK; - if (level == page_size) + if (current_level == target_level) *pte |= PTE_LARGE_MASK | (paddr & PHYSICAL_PAGE_MASK); else *pte |= vm_alloc_page_table(vm) & PHYSICAL_PAGE_MASK; @@ -184,20 +184,19 @@ static uint64_t *virt_create_upper_pte(struct kvm_vm *vm, * a hugepage at this level, and that there isn't a hugepage at * this level. */ - TEST_ASSERT(level != page_size, + TEST_ASSERT(current_level != target_level, "Cannot create hugepage at level: %u, vaddr: 0x%lx\n", - page_size, vaddr); + current_level, vaddr); TEST_ASSERT(!(*pte & PTE_LARGE_MASK), "Cannot create page table at level: %u, vaddr: 0x%lx\n", - level, vaddr); + current_level, vaddr); } return pte; } -void __virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, - enum x86_page_size page_size) +void __virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, int level) { - const uint64_t pg_size = 1ull << ((page_size * 9) + 12); + const uint64_t pg_size = PG_LEVEL_SIZE(level); uint64_t *pml4e, *pdpe, *pde; uint64_t *pte; @@ -222,20 +221,20 @@ void __virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, * early if a hugepage was created. */ pml4e = virt_create_upper_pte(vm, vm->pgd >> vm->page_shift, - vaddr, paddr, 3, page_size); + vaddr, paddr, PG_LEVEL_512G, level); if (*pml4e & PTE_LARGE_MASK) return; - pdpe = virt_create_upper_pte(vm, PTE_GET_PFN(*pml4e), vaddr, paddr, 2, page_size); + pdpe = virt_create_upper_pte(vm, PTE_GET_PFN(*pml4e), vaddr, paddr, PG_LEVEL_1G, level); if (*pdpe & PTE_LARGE_MASK) return; - pde = virt_create_upper_pte(vm, PTE_GET_PFN(*pdpe), vaddr, paddr, 1, page_size); + pde = virt_create_upper_pte(vm, PTE_GET_PFN(*pdpe), vaddr, paddr, PG_LEVEL_2M, level); if (*pde & PTE_LARGE_MASK) return; /* Fill in page table entry. */ - pte = virt_get_pte(vm, PTE_GET_PFN(*pde), vaddr, 0); + pte = virt_get_pte(vm, PTE_GET_PFN(*pde), vaddr, PG_LEVEL_4K); TEST_ASSERT(!(*pte & PTE_PRESENT_MASK), "PTE already present for 4k page at vaddr: 0x%lx\n", vaddr); *pte = PTE_PRESENT_MASK | PTE_WRITABLE_MASK | (paddr & PHYSICAL_PAGE_MASK); @@ -243,7 +242,7 @@ void __virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, void virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr) { - __virt_pg_map(vm, vaddr, paddr, X86_PAGE_SIZE_4K); + __virt_pg_map(vm, vaddr, paddr, PG_LEVEL_4K); } static uint64_t *_vm_get_page_table_entry(struct kvm_vm *vm, int vcpuid, diff --git a/tools/testing/selftests/kvm/lib/x86_64/vmx.c b/tools/testing/selftests/kvm/lib/x86_64/vmx.c index d089d8b..b77a01d 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/vmx.c +++ b/tools/testing/selftests/kvm/lib/x86_64/vmx.c @@ -198,6 +198,16 @@ bool load_vmcs(struct vmx_pages *vmx) return true; } +static bool ept_vpid_cap_supported(uint64_t mask) +{ + return rdmsr(MSR_IA32_VMX_EPT_VPID_CAP) & mask; +} + +bool ept_1g_pages_supported(void) +{ + return ept_vpid_cap_supported(VMX_EPT_VPID_CAP_1G_PAGES); +} + /* * Initialize the control fields to the most basic settings possible. */ @@ -215,7 +225,7 @@ static inline void init_vmcs_control_fields(struct vmx_pages *vmx) struct eptPageTablePointer eptp = { .memory_type = VMX_BASIC_MEM_TYPE_WB, .page_walk_length = 3, /* + 1 */ - .ad_enabled = !!(rdmsr(MSR_IA32_VMX_EPT_VPID_CAP) & VMX_EPT_VPID_CAP_AD_BITS), + .ad_enabled = ept_vpid_cap_supported(VMX_EPT_VPID_CAP_AD_BITS), .address = vmx->eptp_gpa >> PAGE_SHIFT_4K, }; @@ -392,80 +402,93 @@ void nested_vmx_check_supported(void) } } -void nested_pg_map(struct vmx_pages *vmx, struct kvm_vm *vm, - uint64_t nested_paddr, uint64_t paddr) +static void nested_create_pte(struct kvm_vm *vm, + struct eptPageTableEntry *pte, + uint64_t nested_paddr, + uint64_t paddr, + int current_level, + int target_level) +{ + if (!pte->readable) { + pte->writable = true; + pte->readable = true; + pte->executable = true; + pte->page_size = (current_level == target_level); + if (pte->page_size) + pte->address = paddr >> vm->page_shift; + else + pte->address = vm_alloc_page_table(vm) >> vm->page_shift; + } else { + /* + * Entry already present. Assert that the caller doesn't want + * a hugepage at this level, and that there isn't a hugepage at + * this level. + */ + TEST_ASSERT(current_level != target_level, + "Cannot create hugepage at level: %u, nested_paddr: 0x%lx\n", + current_level, nested_paddr); + TEST_ASSERT(!pte->page_size, + "Cannot create page table at level: %u, nested_paddr: 0x%lx\n", + current_level, nested_paddr); + } +} + + +void __nested_pg_map(struct vmx_pages *vmx, struct kvm_vm *vm, + uint64_t nested_paddr, uint64_t paddr, int target_level) { - uint16_t index[4]; - struct eptPageTableEntry *pml4e; + const uint64_t page_size = PG_LEVEL_SIZE(target_level); + struct eptPageTableEntry *pt = vmx->eptp_hva, *pte; + uint16_t index; TEST_ASSERT(vm->mode == VM_MODE_PXXV48_4K, "Attempt to use " "unknown or unsupported guest mode, mode: 0x%x", vm->mode); - TEST_ASSERT((nested_paddr % vm->page_size) == 0, + TEST_ASSERT((nested_paddr >> 48) == 0, + "Nested physical address 0x%lx requires 5-level paging", + nested_paddr); + TEST_ASSERT((nested_paddr % page_size) == 0, "Nested physical address not on page boundary,\n" - " nested_paddr: 0x%lx vm->page_size: 0x%x", - nested_paddr, vm->page_size); + " nested_paddr: 0x%lx page_size: 0x%lx", + nested_paddr, page_size); TEST_ASSERT((nested_paddr >> vm->page_shift) <= vm->max_gfn, "Physical address beyond beyond maximum supported,\n" " nested_paddr: 0x%lx vm->max_gfn: 0x%lx vm->page_size: 0x%x", paddr, vm->max_gfn, vm->page_size); - TEST_ASSERT((paddr % vm->page_size) == 0, + TEST_ASSERT((paddr % page_size) == 0, "Physical address not on page boundary,\n" - " paddr: 0x%lx vm->page_size: 0x%x", - paddr, vm->page_size); + " paddr: 0x%lx page_size: 0x%lx", + paddr, page_size); TEST_ASSERT((paddr >> vm->page_shift) <= vm->max_gfn, "Physical address beyond beyond maximum supported,\n" " paddr: 0x%lx vm->max_gfn: 0x%lx vm->page_size: 0x%x", paddr, vm->max_gfn, vm->page_size); - index[0] = (nested_paddr >> 12) & 0x1ffu; - index[1] = (nested_paddr >> 21) & 0x1ffu; - index[2] = (nested_paddr >> 30) & 0x1ffu; - index[3] = (nested_paddr >> 39) & 0x1ffu; - - /* Allocate page directory pointer table if not present. */ - pml4e = vmx->eptp_hva; - if (!pml4e[index[3]].readable) { - pml4e[index[3]].address = vm_alloc_page_table(vm) >> vm->page_shift; - pml4e[index[3]].writable = true; - pml4e[index[3]].readable = true; - pml4e[index[3]].executable = true; - } + for (int level = PG_LEVEL_512G; level >= PG_LEVEL_4K; level--) { + index = (nested_paddr >> PG_LEVEL_SHIFT(level)) & 0x1ffu; + pte = &pt[index]; - /* Allocate page directory table if not present. */ - struct eptPageTableEntry *pdpe; - pdpe = addr_gpa2hva(vm, pml4e[index[3]].address * vm->page_size); - if (!pdpe[index[2]].readable) { - pdpe[index[2]].address = vm_alloc_page_table(vm) >> vm->page_shift; - pdpe[index[2]].writable = true; - pdpe[index[2]].readable = true; - pdpe[index[2]].executable = true; - } + nested_create_pte(vm, pte, nested_paddr, paddr, level, target_level); - /* Allocate page table if not present. */ - struct eptPageTableEntry *pde; - pde = addr_gpa2hva(vm, pdpe[index[2]].address * vm->page_size); - if (!pde[index[1]].readable) { - pde[index[1]].address = vm_alloc_page_table(vm) >> vm->page_shift; - pde[index[1]].writable = true; - pde[index[1]].readable = true; - pde[index[1]].executable = true; - } + if (pte->page_size) + break; - /* Fill in page table entry. */ - struct eptPageTableEntry *pte; - pte = addr_gpa2hva(vm, pde[index[1]].address * vm->page_size); - pte[index[0]].address = paddr >> vm->page_shift; - pte[index[0]].writable = true; - pte[index[0]].readable = true; - pte[index[0]].executable = true; + pt = addr_gpa2hva(vm, pte->address * vm->page_size); + } /* * For now mark these as accessed and dirty because the only * testcase we have needs that. Can be reconsidered later. */ - pte[index[0]].accessed = true; - pte[index[0]].dirty = true; + pte->accessed = true; + pte->dirty = true; + +} + +void nested_pg_map(struct vmx_pages *vmx, struct kvm_vm *vm, + uint64_t nested_paddr, uint64_t paddr) +{ + __nested_pg_map(vmx, vm, nested_paddr, paddr, PG_LEVEL_4K); } /* @@ -476,7 +499,7 @@ void nested_pg_map(struct vmx_pages *vmx, struct kvm_vm *vm, * nested_paddr - Nested guest physical address to map * paddr - VM Physical Address * size - The size of the range to map - * eptp_memslot - Memory region slot for new virtual translation tables + * level - The level at which to map the range * * Output Args: None * @@ -485,22 +508,29 @@ void nested_pg_map(struct vmx_pages *vmx, struct kvm_vm *vm, * Within the VM given by vm, creates a nested guest translation for the * page range starting at nested_paddr to the page range starting at paddr. */ -void nested_map(struct vmx_pages *vmx, struct kvm_vm *vm, - uint64_t nested_paddr, uint64_t paddr, uint64_t size) +void __nested_map(struct vmx_pages *vmx, struct kvm_vm *vm, + uint64_t nested_paddr, uint64_t paddr, uint64_t size, + int level) { - size_t page_size = vm->page_size; + size_t page_size = PG_LEVEL_SIZE(level); size_t npages = size / page_size; TEST_ASSERT(nested_paddr + size > nested_paddr, "Vaddr overflow"); TEST_ASSERT(paddr + size > paddr, "Paddr overflow"); while (npages--) { - nested_pg_map(vmx, vm, nested_paddr, paddr); + __nested_pg_map(vmx, vm, nested_paddr, paddr, level); nested_paddr += page_size; paddr += page_size; } } +void nested_map(struct vmx_pages *vmx, struct kvm_vm *vm, + uint64_t nested_paddr, uint64_t paddr, uint64_t size) +{ + __nested_map(vmx, vm, nested_paddr, paddr, size, PG_LEVEL_4K); +} + /* Prepare an identity extended page table that maps all the * physical pages in VM. */ @@ -525,6 +555,13 @@ void nested_map_memslot(struct vmx_pages *vmx, struct kvm_vm *vm, } } +/* Identity map a region with 1GiB Pages. */ +void nested_identity_map_1g(struct vmx_pages *vmx, struct kvm_vm *vm, + uint64_t addr, uint64_t size) +{ + __nested_map(vmx, vm, addr, addr, size, PG_LEVEL_1G); +} + void prepare_eptp(struct vmx_pages *vmx, struct kvm_vm *vm, uint32_t eptp_memslot) { diff --git a/tools/testing/selftests/kvm/max_guest_memory_test.c b/tools/testing/selftests/kvm/max_guest_memory_test.c index 3875c4b..15f046e 100644 --- a/tools/testing/selftests/kvm/max_guest_memory_test.c +++ b/tools/testing/selftests/kvm/max_guest_memory_test.c @@ -244,7 +244,7 @@ int main(int argc, char *argv[]) #ifdef __x86_64__ /* Identity map memory in the guest using 1gb pages. */ for (i = 0; i < slot_size; i += size_1gb) - __virt_pg_map(vm, gpa + i, gpa + i, X86_PAGE_SIZE_1G); + __virt_pg_map(vm, gpa + i, gpa + i, PG_LEVEL_1G); #else for (i = 0; i < slot_size; i += vm_get_page_size(vm)) virt_pg_map(vm, gpa + i, gpa + i); diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0..2237d1a 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -82,8 +82,9 @@ static int next_cpu(int cpu) return cpu; } -static void *migration_worker(void *ign) +static void *migration_worker(void *__rseq_tid) { + pid_t rseq_tid = (pid_t)(unsigned long)__rseq_tid; cpu_set_t allowed_mask; int r, i, cpu; @@ -106,7 +107,7 @@ static void *migration_worker(void *ign) * stable, i.e. while changing affinity is in-progress. */ smp_wmb(); - r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask); + r = sched_setaffinity(rseq_tid, sizeof(allowed_mask), &allowed_mask); TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)", errno, strerror(errno)); smp_wmb(); @@ -231,7 +232,8 @@ int main(int argc, char *argv[]) vm = vm_create_default(VCPU_ID, 0, guest_code); ucall_init(vm, NULL); - pthread_create(&migration_thread, NULL, migration_worker, 0); + pthread_create(&migration_thread, NULL, migration_worker, + (void *)(unsigned long)gettid()); for (i = 0; !done; i++) { vcpu_run(vm, VCPU_ID); diff --git a/tools/testing/selftests/kvm/x86_64/hyperv_clock.c b/tools/testing/selftests/kvm/x86_64/hyperv_clock.c index e0b2bb1..3330fb1 100644 --- a/tools/testing/selftests/kvm/x86_64/hyperv_clock.c +++ b/tools/testing/selftests/kvm/x86_64/hyperv_clock.c @@ -44,7 +44,7 @@ static inline void nop_loop(void) { int i; - for (i = 0; i < 1000000; i++) + for (i = 0; i < 100000000; i++) asm volatile("nop"); } @@ -56,12 +56,14 @@ static inline void check_tsc_msr_rdtsc(void) tsc_freq = rdmsr(HV_X64_MSR_TSC_FREQUENCY); GUEST_ASSERT(tsc_freq > 0); - /* First, check MSR-based clocksource */ + /* For increased accuracy, take mean rdtsc() before and afrer rdmsr() */ r1 = rdtsc(); t1 = rdmsr(HV_X64_MSR_TIME_REF_COUNT); + r1 = (r1 + rdtsc()) / 2; nop_loop(); r2 = rdtsc(); t2 = rdmsr(HV_X64_MSR_TIME_REF_COUNT); + r2 = (r2 + rdtsc()) / 2; GUEST_ASSERT(r2 > r1 && t2 > t1); @@ -181,12 +183,14 @@ static void host_check_tsc_msr_rdtsc(struct kvm_vm *vm) tsc_freq = vcpu_get_msr(vm, VCPU_ID, HV_X64_MSR_TSC_FREQUENCY); TEST_ASSERT(tsc_freq > 0, "TSC frequency must be nonzero"); - /* First, check MSR-based clocksource */ + /* For increased accuracy, take mean rdtsc() before and afrer ioctl */ r1 = rdtsc(); t1 = vcpu_get_msr(vm, VCPU_ID, HV_X64_MSR_TIME_REF_COUNT); + r1 = (r1 + rdtsc()) / 2; nop_loop(); r2 = rdtsc(); t2 = vcpu_get_msr(vm, VCPU_ID, HV_X64_MSR_TIME_REF_COUNT); + r2 = (r2 + rdtsc()) / 2; TEST_ASSERT(t2 > t1, "Time reference MSR is not monotonic (%ld <= %ld)", t1, t2); diff --git a/tools/testing/selftests/kvm/x86_64/mmu_role_test.c b/tools/testing/selftests/kvm/x86_64/mmu_role_test.c index da2325f..bdecd53 100644 --- a/tools/testing/selftests/kvm/x86_64/mmu_role_test.c +++ b/tools/testing/selftests/kvm/x86_64/mmu_role_test.c @@ -35,7 +35,7 @@ static void mmu_role_test(u32 *cpuid_reg, u32 evil_cpuid_val) run = vcpu_state(vm, VCPU_ID); /* Map 1gb page without a backing memlot. */ - __virt_pg_map(vm, MMIO_GPA, MMIO_GPA, X86_PAGE_SIZE_1G); + __virt_pg_map(vm, MMIO_GPA, MMIO_GPA, PG_LEVEL_1G); r = _vcpu_run(vm, VCPU_ID); diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 2a2d240..1a5cc3c 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -7,10 +7,31 @@ else ifneq ($(filter -%,$(LLVM)),) LLVM_SUFFIX := $(LLVM) endif -CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) +CLANG_TARGET_FLAGS_arm := arm-linux-gnueabi +CLANG_TARGET_FLAGS_arm64 := aarch64-linux-gnu +CLANG_TARGET_FLAGS_hexagon := hexagon-linux-musl +CLANG_TARGET_FLAGS_m68k := m68k-linux-gnu +CLANG_TARGET_FLAGS_mips := mipsel-linux-gnu +CLANG_TARGET_FLAGS_powerpc := powerpc64le-linux-gnu +CLANG_TARGET_FLAGS_riscv := riscv64-linux-gnu +CLANG_TARGET_FLAGS_s390 := s390x-linux-gnu +CLANG_TARGET_FLAGS_x86 := x86_64-linux-gnu +CLANG_TARGET_FLAGS := $(CLANG_TARGET_FLAGS_$(ARCH)) + +ifeq ($(CROSS_COMPILE),) +ifeq ($(CLANG_TARGET_FLAGS),) +$(error Specify CROSS_COMPILE or add '--target=' option to lib.mk +else +CLANG_FLAGS += --target=$(CLANG_TARGET_FLAGS) +endif # CLANG_TARGET_FLAGS +else +CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif # CROSS_COMPILE + +CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as else CC := $(CROSS_COMPILE)gcc -endif +endif # LLVM ifeq (0,$(MAKELEVEL)) ifeq ($(OUTPUT),) diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index b984f8c..ffc35a2 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -36,5 +36,5 @@ test_unix_oob gro ioam6_parser toeplitz +tun cmsg_sender -bind_bhash_test diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 464df13..9a4b30b 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -11,7 +11,7 @@ TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh traceroute.sh -TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh +TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh fib_nexthop_nongw.sh TEST_PROGS += altnames.sh icmp.sh icmp_redirect.sh ip6_gre_headroom.sh TEST_PROGS += route_localnet.sh TEST_PROGS += reuseaddr_ports_exhausted.sh @@ -54,12 +54,12 @@ TEST_GEN_FILES += ipsec TEST_GEN_FILES += ioam6_parser TEST_GEN_FILES += gro TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa -TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls +TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun TEST_GEN_FILES += toeplitz TEST_GEN_FILES += cmsg_sender TEST_GEN_FILES += stress_reuseport_listen TEST_PROGS += test_vxlan_vnifiltering.sh -TEST_GEN_FILES += bind_bhash_test +TEST_GEN_FILES += io_uring_zerocopy_tx TEST_FILES := settings @@ -70,5 +70,4 @@ include bpf/Makefile $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma $(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -$(OUTPUT)/bind_bhash_test: LDLIBS += -lpthread $(OUTPUT)/tcp_inq: LDLIBS += -lpthread diff --git a/tools/testing/selftests/net/bind_bhash_test.c b/tools/testing/selftests/net/bind_bhash_test.c deleted file mode 100644 index 252e737..0000000 --- a/tools/testing/selftests/net/bind_bhash_test.c +++ /dev/null @@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * This times how long it takes to bind to a port when the port already - * has multiple sockets in its bhash table. - * - * In the setup(), we populate the port's bhash table with - * MAX_THREADS * MAX_CONNECTIONS number of entries. - */ - -#include -#include -#include -#include - -#define MAX_THREADS 600 -#define MAX_CONNECTIONS 40 - -static const char *bind_addr = "::1"; -static const char *port; - -static int fd_array[MAX_THREADS][MAX_CONNECTIONS]; - -static int bind_socket(int opt, const char *addr) -{ - struct addrinfo *res, hint = {}; - int sock_fd, reuse = 1, err; - - sock_fd = socket(AF_INET6, SOCK_STREAM, 0); - if (sock_fd < 0) { - perror("socket fd err"); - return -1; - } - - hint.ai_family = AF_INET6; - hint.ai_socktype = SOCK_STREAM; - - err = getaddrinfo(addr, port, &hint, &res); - if (err) { - perror("getaddrinfo failed"); - return -1; - } - - if (opt) { - err = setsockopt(sock_fd, SOL_SOCKET, opt, &reuse, sizeof(reuse)); - if (err) { - perror("setsockopt failed"); - return -1; - } - } - - err = bind(sock_fd, res->ai_addr, res->ai_addrlen); - if (err) { - perror("failed to bind to port"); - return -1; - } - - return sock_fd; -} - -static void *setup(void *arg) -{ - int sock_fd, i; - int *array = (int *)arg; - - for (i = 0; i < MAX_CONNECTIONS; i++) { - sock_fd = bind_socket(SO_REUSEADDR | SO_REUSEPORT, bind_addr); - if (sock_fd < 0) - return NULL; - array[i] = sock_fd; - } - - return NULL; -} - -int main(int argc, const char *argv[]) -{ - int listener_fd, sock_fd, i, j; - pthread_t tid[MAX_THREADS]; - clock_t begin, end; - - if (argc != 2) { - printf("Usage: listener \n"); - return -1; - } - - port = argv[1]; - - listener_fd = bind_socket(SO_REUSEADDR | SO_REUSEPORT, bind_addr); - if (listen(listener_fd, 100) < 0) { - perror("listen failed"); - return -1; - } - - /* Set up threads to populate the bhash table entry for the port */ - for (i = 0; i < MAX_THREADS; i++) - pthread_create(&tid[i], NULL, setup, fd_array[i]); - - for (i = 0; i < MAX_THREADS; i++) - pthread_join(tid[i], NULL); - - begin = clock(); - - /* Bind to the same port on a different address */ - sock_fd = bind_socket(0, "2001:0db8:0:f101::1"); - - end = clock(); - - printf("time spent = %f\n", (double)(end - begin) / CLOCKS_PER_SEC); - - /* clean up */ - close(sock_fd); - close(listener_fd); - for (i = 0; i < MAX_THREADS; i++) { - for (j = 0; i < MAX_THREADS; i++) - close(fd_array[i][j]); - } - - return 0; -} diff --git a/tools/testing/selftests/net/bpf/Makefile b/tools/testing/selftests/net/bpf/Makefile index f91bf14..8ccaf87 100644 --- a/tools/testing/selftests/net/bpf/Makefile +++ b/tools/testing/selftests/net/bpf/Makefile @@ -2,6 +2,7 @@ CLANG ?= clang CCINCLUDE += -I../../bpf +CCINCLUDE += -I../../../../lib CCINCLUDE += -I../../../../../usr/include/ TEST_CUSTOM_PROGS = $(OUTPUT)/bpf/nat6to4.o @@ -10,5 +11,4 @@ all: $(TEST_CUSTOM_PROGS) $(OUTPUT)/%.o: %.c $(CLANG) -O2 -target bpf -c $< $(CCINCLUDE) -o $@ -clean: - rm -f $(TEST_CUSTOM_PROGS) +EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 54701c8..03b5867 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -70,6 +70,10 @@ NSB_LO_IP6=2001:db8:2::2 NL_IP=172.17.1.1 NL_IP6=2001:db8:4::1 +# multicast and broadcast addresses +MCAST_IP=224.0.0.1 +BCAST_IP=255.255.255.255 + MD5_PW=abc123 MD5_WRONG_PW=abc1234 @@ -308,6 +312,9 @@ addr2str() 127.0.0.1) echo "loopback";; ::1) echo "IPv6 loopback";; + ${BCAST_IP}) echo "broadcast";; + ${MCAST_IP}) echo "multicast";; + ${NSA_IP}) echo "ns-A IP";; ${NSA_IP6}) echo "ns-A IPv6";; ${NSA_LO_IP}) echo "ns-A loopback IP";; @@ -1793,12 +1800,33 @@ ipv4_addr_bind_novrf() done # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b - log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after device bind" + run_cmd nettest -s -R -f -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address" + + log_start + run_cmd nettest -s -f -l ${a} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address" + + log_start + run_cmd nettest -s -D -P icmp -f -l ${a} -b + log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address" + + # + # check that ICMP sockets cannot bind to broadcast and multicast addresses + # + a=${BCAST_IP} + log_start + run_cmd nettest -s -D -P icmp -l ${a} -b + log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address" + + a=${MCAST_IP} + log_start + run_cmd nettest -s -D -P icmp -l ${a} -b + log_test_addr ${a} $? 1 "ICMP socket bind to multicast address" # # tcp sockets @@ -1850,13 +1878,34 @@ ipv4_addr_bind_vrf() log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -R -f -l ${a} -I ${VRF} -b log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind" + log_start + run_cmd nettest -s -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address after VRF bind" + + log_start + run_cmd nettest -s -D -P icmp -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address after VRF bind" + + # + # check that ICMP sockets cannot bind to broadcast and multicast addresses + # + a=${BCAST_IP} + log_start + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address after VRF bind" + + a=${MCAST_IP} + log_start + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 1 "ICMP socket bind to multicast address after VRF bind" + # # tcp sockets # @@ -1889,10 +1938,12 @@ ipv4_addr_bind() log_subsection "No VRF" setup + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null ipv4_addr_bind_novrf log_subsection "With VRF" setup "yes" + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null ipv4_addr_bind_vrf } diff --git a/tools/testing/selftests/net/fib_nexthop_nongw.sh b/tools/testing/selftests/net/fib_nexthop_nongw.sh new file mode 100755 index 0000000..b7b928b --- /dev/null +++ b/tools/testing/selftests/net/fib_nexthop_nongw.sh @@ -0,0 +1,119 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# ns: h1 | ns: h2 +# 192.168.0.1/24 | +# eth0 | +# | 192.168.1.1/32 +# veth0 <---|---> veth1 +# Validate source address selection for route without gateway + +PAUSE_ON_FAIL=no +VERBOSE=0 +ret=0 + +################################################################################ +# helpers + +log_test() +{ + local rc=$1 + local expected=$2 + local msg="$3" + + if [ ${rc} -eq ${expected} ]; then + printf "TEST: %-60s [ OK ]\n" "${msg}" + nsuccess=$((nsuccess+1)) + else + ret=1 + nfail=$((nfail+1)) + printf "TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi + + [ "$VERBOSE" = "1" ] && echo +} + +run_cmd() +{ + local cmd="$*" + local out + local rc + + if [ "$VERBOSE" = "1" ]; then + echo "COMMAND: $cmd" + fi + + out=$(eval $cmd 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo "$out" + fi + + [ "$VERBOSE" = "1" ] && echo + + return $rc +} + +################################################################################ +# config +setup() +{ + ip netns add h1 + ip -n h1 link set lo up + ip netns add h2 + ip -n h2 link set lo up + + # Add a fake eth0 to support an ip address + ip -n h1 link add name eth0 type dummy + ip -n h1 link set eth0 up + ip -n h1 address add 192.168.0.1/24 dev eth0 + + # Configure veths (same @mac, arp off) + ip -n h1 link add name veth0 type veth peer name veth1 netns h2 + ip -n h1 link set veth0 up + + ip -n h2 link set veth1 up + + # Configure @IP in the peer netns + ip -n h2 address add 192.168.1.1/32 dev veth1 + ip -n h2 route add default dev veth1 + + # Add a nexthop without @gw and use it in a route + ip -n h1 nexthop add id 1 dev veth0 + ip -n h1 route add 192.168.1.1 nhid 1 +} + +cleanup() +{ + ip netns del h1 2>/dev/null + ip netns del h2 2>/dev/null +} + +trap cleanup EXIT + +################################################################################ +# main + +while getopts :pv o +do + case $o in + p) PAUSE_ON_FAIL=yes;; + v) VERBOSE=1;; + esac +done + +cleanup +setup + +run_cmd ip -netns h1 route get 192.168.1.1 +log_test $? 0 "nexthop: get route with nexthop without gw" +run_cmd ip netns exec h1 ping -c1 192.168.1.1 +log_test $? 0 "nexthop: ping through nexthop without gw" + +exit $ret diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index 8f48121..57b84e0 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -37,6 +37,7 @@ TEST_PROGS = bridge_igmp.sh \ ipip_hier_gre_key.sh \ ipip_hier_gre_keys.sh \ ipip_hier_gre.sh \ + local_termination.sh \ loopback.sh \ mirror_gre_bound.sh \ mirror_gre_bridge_1d.sh \ @@ -52,6 +53,7 @@ TEST_PROGS = bridge_igmp.sh \ mirror_gre_vlan_bridge_1q.sh \ mirror_gre_vlan.sh \ mirror_vlan.sh \ + no_forwarding.sh \ pedit_dsfield.sh \ pedit_ip.sh \ pedit_l4port.sh \ diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 37ae49d..3ffb9d6 100755 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -1240,6 +1240,7 @@ learning_test() # FDB entry was installed. bridge link set dev $br_port1 flood off + ip link set $host1_if promisc on tc qdisc add dev $host1_if ingress tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \ flower dst_mac $mac action drop @@ -1250,7 +1251,7 @@ learning_test() tc -j -s filter show dev $host1_if ingress \ | jq -e ".[] | select(.options.handle == 101) \ | select(.options.actions[0].stats.packets == 1)" &> /dev/null - check_fail $? "Packet reached second host when should not" + check_fail $? "Packet reached first host when should not" $MZ $host1_if -c 1 -p 64 -a $mac -t ip -q sleep 1 @@ -1289,6 +1290,7 @@ learning_test() tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower tc qdisc del dev $host1_if ingress + ip link set $host1_if promisc off bridge link set dev $br_port1 flood on @@ -1306,6 +1308,7 @@ flood_test_do() # Add an ACL on `host2_if` which will tell us whether the packet # was flooded to it or not. + ip link set $host2_if promisc on tc qdisc add dev $host2_if ingress tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ flower dst_mac $mac action drop @@ -1323,6 +1326,7 @@ flood_test_do() tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower tc qdisc del dev $host2_if ingress + ip link set $host2_if promisc off return $err } diff --git a/tools/testing/selftests/net/io_uring_zerocopy_tx.c b/tools/testing/selftests/net/io_uring_zerocopy_tx.c new file mode 100644 index 0000000..9d64c56 --- /dev/null +++ b/tools/testing/selftests/net/io_uring_zerocopy_tx.c @@ -0,0 +1,605 @@ +/* SPDX-License-Identifier: MIT */ +/* based on linux-kernel/tools/testing/selftests/net/msg_zerocopy.c */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NOTIF_TAG 0xfffffffULL +#define NONZC_TAG 0 +#define ZC_TAG 1 + +enum { + MODE_NONZC = 0, + MODE_ZC = 1, + MODE_ZC_FIXED = 2, + MODE_MIXED = 3, +}; + +static bool cfg_flush = false; +static bool cfg_cork = false; +static int cfg_mode = MODE_ZC_FIXED; +static int cfg_nr_reqs = 8; +static int cfg_family = PF_UNSPEC; +static int cfg_payload_len; +static int cfg_port = 8000; +static int cfg_runtime_ms = 4200; + +static socklen_t cfg_alen; +static struct sockaddr_storage cfg_dst_addr; + +static char payload[IP_MAXPACKET] __attribute__((aligned(4096))); + +struct io_sq_ring { + unsigned *head; + unsigned *tail; + unsigned *ring_mask; + unsigned *ring_entries; + unsigned *flags; + unsigned *array; +}; + +struct io_cq_ring { + unsigned *head; + unsigned *tail; + unsigned *ring_mask; + unsigned *ring_entries; + struct io_uring_cqe *cqes; +}; + +struct io_uring_sq { + unsigned *khead; + unsigned *ktail; + unsigned *kring_mask; + unsigned *kring_entries; + unsigned *kflags; + unsigned *kdropped; + unsigned *array; + struct io_uring_sqe *sqes; + + unsigned sqe_head; + unsigned sqe_tail; + + size_t ring_sz; +}; + +struct io_uring_cq { + unsigned *khead; + unsigned *ktail; + unsigned *kring_mask; + unsigned *kring_entries; + unsigned *koverflow; + struct io_uring_cqe *cqes; + + size_t ring_sz; +}; + +struct io_uring { + struct io_uring_sq sq; + struct io_uring_cq cq; + int ring_fd; +}; + +#ifdef __alpha__ +# ifndef __NR_io_uring_setup +# define __NR_io_uring_setup 535 +# endif +# ifndef __NR_io_uring_enter +# define __NR_io_uring_enter 536 +# endif +# ifndef __NR_io_uring_register +# define __NR_io_uring_register 537 +# endif +#else /* !__alpha__ */ +# ifndef __NR_io_uring_setup +# define __NR_io_uring_setup 425 +# endif +# ifndef __NR_io_uring_enter +# define __NR_io_uring_enter 426 +# endif +# ifndef __NR_io_uring_register +# define __NR_io_uring_register 427 +# endif +#endif + +#if defined(__x86_64) || defined(__i386__) +#define read_barrier() __asm__ __volatile__("":::"memory") +#define write_barrier() __asm__ __volatile__("":::"memory") +#else + +#define read_barrier() __sync_synchronize() +#define write_barrier() __sync_synchronize() +#endif + +static int io_uring_setup(unsigned int entries, struct io_uring_params *p) +{ + return syscall(__NR_io_uring_setup, entries, p); +} + +static int io_uring_enter(int fd, unsigned int to_submit, + unsigned int min_complete, + unsigned int flags, sigset_t *sig) +{ + return syscall(__NR_io_uring_enter, fd, to_submit, min_complete, + flags, sig, _NSIG / 8); +} + +static int io_uring_register_buffers(struct io_uring *ring, + const struct iovec *iovecs, + unsigned nr_iovecs) +{ + int ret; + + ret = syscall(__NR_io_uring_register, ring->ring_fd, + IORING_REGISTER_BUFFERS, iovecs, nr_iovecs); + return (ret < 0) ? -errno : ret; +} + +static int io_uring_register_notifications(struct io_uring *ring, + unsigned nr, + struct io_uring_notification_slot *slots) +{ + int ret; + struct io_uring_notification_register r = { + .nr_slots = nr, + .data = (unsigned long)slots, + }; + + ret = syscall(__NR_io_uring_register, ring->ring_fd, + IORING_REGISTER_NOTIFIERS, &r, sizeof(r)); + return (ret < 0) ? -errno : ret; +} + +static int io_uring_mmap(int fd, struct io_uring_params *p, + struct io_uring_sq *sq, struct io_uring_cq *cq) +{ + size_t size; + void *ptr; + int ret; + + sq->ring_sz = p->sq_off.array + p->sq_entries * sizeof(unsigned); + ptr = mmap(0, sq->ring_sz, PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_POPULATE, fd, IORING_OFF_SQ_RING); + if (ptr == MAP_FAILED) + return -errno; + sq->khead = ptr + p->sq_off.head; + sq->ktail = ptr + p->sq_off.tail; + sq->kring_mask = ptr + p->sq_off.ring_mask; + sq->kring_entries = ptr + p->sq_off.ring_entries; + sq->kflags = ptr + p->sq_off.flags; + sq->kdropped = ptr + p->sq_off.dropped; + sq->array = ptr + p->sq_off.array; + + size = p->sq_entries * sizeof(struct io_uring_sqe); + sq->sqes = mmap(0, size, PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_POPULATE, fd, IORING_OFF_SQES); + if (sq->sqes == MAP_FAILED) { + ret = -errno; +err: + munmap(sq->khead, sq->ring_sz); + return ret; + } + + cq->ring_sz = p->cq_off.cqes + p->cq_entries * sizeof(struct io_uring_cqe); + ptr = mmap(0, cq->ring_sz, PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_POPULATE, fd, IORING_OFF_CQ_RING); + if (ptr == MAP_FAILED) { + ret = -errno; + munmap(sq->sqes, p->sq_entries * sizeof(struct io_uring_sqe)); + goto err; + } + cq->khead = ptr + p->cq_off.head; + cq->ktail = ptr + p->cq_off.tail; + cq->kring_mask = ptr + p->cq_off.ring_mask; + cq->kring_entries = ptr + p->cq_off.ring_entries; + cq->koverflow = ptr + p->cq_off.overflow; + cq->cqes = ptr + p->cq_off.cqes; + return 0; +} + +static int io_uring_queue_init(unsigned entries, struct io_uring *ring, + unsigned flags) +{ + struct io_uring_params p; + int fd, ret; + + memset(ring, 0, sizeof(*ring)); + memset(&p, 0, sizeof(p)); + p.flags = flags; + + fd = io_uring_setup(entries, &p); + if (fd < 0) + return fd; + ret = io_uring_mmap(fd, &p, &ring->sq, &ring->cq); + if (!ret) + ring->ring_fd = fd; + else + close(fd); + return ret; +} + +static int io_uring_submit(struct io_uring *ring) +{ + struct io_uring_sq *sq = &ring->sq; + const unsigned mask = *sq->kring_mask; + unsigned ktail, submitted, to_submit; + int ret; + + read_barrier(); + if (*sq->khead != *sq->ktail) { + submitted = *sq->kring_entries; + goto submit; + } + if (sq->sqe_head == sq->sqe_tail) + return 0; + + ktail = *sq->ktail; + to_submit = sq->sqe_tail - sq->sqe_head; + for (submitted = 0; submitted < to_submit; submitted++) { + read_barrier(); + sq->array[ktail++ & mask] = sq->sqe_head++ & mask; + } + if (!submitted) + return 0; + + if (*sq->ktail != ktail) { + write_barrier(); + *sq->ktail = ktail; + write_barrier(); + } +submit: + ret = io_uring_enter(ring->ring_fd, submitted, 0, + IORING_ENTER_GETEVENTS, NULL); + return ret < 0 ? -errno : ret; +} + +static inline void io_uring_prep_send(struct io_uring_sqe *sqe, int sockfd, + const void *buf, size_t len, int flags) +{ + memset(sqe, 0, sizeof(*sqe)); + sqe->opcode = (__u8) IORING_OP_SEND; + sqe->fd = sockfd; + sqe->addr = (unsigned long) buf; + sqe->len = len; + sqe->msg_flags = (__u32) flags; +} + +static inline void io_uring_prep_sendzc(struct io_uring_sqe *sqe, int sockfd, + const void *buf, size_t len, int flags, + unsigned slot_idx, unsigned zc_flags) +{ + io_uring_prep_send(sqe, sockfd, buf, len, flags); + sqe->opcode = (__u8) IORING_OP_SENDZC_NOTIF; + sqe->notification_idx = slot_idx; + sqe->ioprio = zc_flags; +} + +static struct io_uring_sqe *io_uring_get_sqe(struct io_uring *ring) +{ + struct io_uring_sq *sq = &ring->sq; + + if (sq->sqe_tail + 1 - sq->sqe_head > *sq->kring_entries) + return NULL; + return &sq->sqes[sq->sqe_tail++ & *sq->kring_mask]; +} + +static int io_uring_wait_cqe(struct io_uring *ring, struct io_uring_cqe **cqe_ptr) +{ + struct io_uring_cq *cq = &ring->cq; + const unsigned mask = *cq->kring_mask; + unsigned head = *cq->khead; + int ret; + + *cqe_ptr = NULL; + do { + read_barrier(); + if (head != *cq->ktail) { + *cqe_ptr = &cq->cqes[head & mask]; + break; + } + ret = io_uring_enter(ring->ring_fd, 0, 1, + IORING_ENTER_GETEVENTS, NULL); + if (ret < 0) + return -errno; + } while (1); + + return 0; +} + +static inline void io_uring_cqe_seen(struct io_uring *ring) +{ + *(&ring->cq)->khead += 1; + write_barrier(); +} + +static unsigned long gettimeofday_ms(void) +{ + struct timeval tv; + + gettimeofday(&tv, NULL); + return (tv.tv_sec * 1000) + (tv.tv_usec / 1000); +} + +static void do_setsockopt(int fd, int level, int optname, int val) +{ + if (setsockopt(fd, level, optname, &val, sizeof(val))) + error(1, errno, "setsockopt %d.%d: %d", level, optname, val); +} + +static int do_setup_tx(int domain, int type, int protocol) +{ + int fd; + + fd = socket(domain, type, protocol); + if (fd == -1) + error(1, errno, "socket t"); + + do_setsockopt(fd, SOL_SOCKET, SO_SNDBUF, 1 << 21); + + if (connect(fd, (void *) &cfg_dst_addr, cfg_alen)) + error(1, errno, "connect"); + return fd; +} + +static void do_tx(int domain, int type, int protocol) +{ + struct io_uring_notification_slot b[1] = {{.tag = NOTIF_TAG}}; + struct io_uring_sqe *sqe; + struct io_uring_cqe *cqe; + unsigned long packets = 0, bytes = 0; + struct io_uring ring; + struct iovec iov; + uint64_t tstop; + int i, fd, ret; + int compl_cqes = 0; + + fd = do_setup_tx(domain, type, protocol); + + ret = io_uring_queue_init(512, &ring, 0); + if (ret) + error(1, ret, "io_uring: queue init"); + + ret = io_uring_register_notifications(&ring, 1, b); + if (ret) + error(1, ret, "io_uring: tx ctx registration"); + + iov.iov_base = payload; + iov.iov_len = cfg_payload_len; + + ret = io_uring_register_buffers(&ring, &iov, 1); + if (ret) + error(1, ret, "io_uring: buffer registration"); + + tstop = gettimeofday_ms() + cfg_runtime_ms; + do { + if (cfg_cork) + do_setsockopt(fd, IPPROTO_UDP, UDP_CORK, 1); + + for (i = 0; i < cfg_nr_reqs; i++) { + unsigned zc_flags = 0; + unsigned buf_idx = 0; + unsigned slot_idx = 0; + unsigned mode = cfg_mode; + unsigned msg_flags = 0; + + if (cfg_mode == MODE_MIXED) + mode = rand() % 3; + + sqe = io_uring_get_sqe(&ring); + + if (mode == MODE_NONZC) { + io_uring_prep_send(sqe, fd, payload, + cfg_payload_len, msg_flags); + sqe->user_data = NONZC_TAG; + } else { + if (cfg_flush) { + zc_flags |= IORING_RECVSEND_NOTIF_FLUSH; + compl_cqes++; + } + io_uring_prep_sendzc(sqe, fd, payload, + cfg_payload_len, + msg_flags, slot_idx, zc_flags); + if (mode == MODE_ZC_FIXED) { + sqe->ioprio |= IORING_RECVSEND_FIXED_BUF; + sqe->buf_index = buf_idx; + } + sqe->user_data = ZC_TAG; + } + } + + ret = io_uring_submit(&ring); + if (ret != cfg_nr_reqs) + error(1, ret, "submit"); + + for (i = 0; i < cfg_nr_reqs; i++) { + ret = io_uring_wait_cqe(&ring, &cqe); + if (ret) + error(1, ret, "wait cqe"); + + if (cqe->user_data == NOTIF_TAG) { + compl_cqes--; + i--; + } else if (cqe->user_data != NONZC_TAG && + cqe->user_data != ZC_TAG) { + error(1, cqe->res, "invalid user_data"); + } else if (cqe->res <= 0 && cqe->res != -EAGAIN) { + error(1, cqe->res, "send failed"); + } else { + if (cqe->res > 0) { + packets++; + bytes += cqe->res; + } + /* failed requests don't flush */ + if (cfg_flush && + cqe->res <= 0 && + cqe->user_data == ZC_TAG) + compl_cqes--; + } + io_uring_cqe_seen(&ring); + } + if (cfg_cork) + do_setsockopt(fd, IPPROTO_UDP, UDP_CORK, 0); + } while (gettimeofday_ms() < tstop); + + if (close(fd)) + error(1, errno, "close"); + + fprintf(stderr, "tx=%lu (MB=%lu), tx/s=%lu (MB/s=%lu)\n", + packets, bytes >> 20, + packets / (cfg_runtime_ms / 1000), + (bytes >> 20) / (cfg_runtime_ms / 1000)); + + while (compl_cqes) { + ret = io_uring_wait_cqe(&ring, &cqe); + if (ret) + error(1, ret, "wait cqe"); + io_uring_cqe_seen(&ring); + compl_cqes--; + } +} + +static void do_test(int domain, int type, int protocol) +{ + int i; + + for (i = 0; i < IP_MAXPACKET; i++) + payload[i] = 'a' + (i % 26); + do_tx(domain, type, protocol); +} + +static void usage(const char *filepath) +{ + error(1, 0, "Usage: %s [-f] [-n] [-z0] [-s] " + "(-4|-6) [-t