From: Jacob Pan <jacob.jun.pan@intel.com>
Date: Thu, 10 Nov 2011 13:42:40 +0000 (+0000)
Subject: x86/apic: Allow use of lapic timer early calibration result
X-Git-Tag: v3.2-rc3~35^2~5
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=1ade93efd0a3dda5b0c0afda8ab8f4bd12938c1b;p=profile%2Fivi%2Fkernel-x86-ivi.git

x86/apic: Allow use of lapic timer early calibration result

lapic timer calibration can be combined with tsc in platform
specific calibration functions. if such calibration result is
obtained early, we can skip the redundant calibration loops.

Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 9b7273c..1a6c09a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -49,6 +49,7 @@ extern unsigned int apic_verbosity;
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
+extern unsigned int lapic_timer_frequency;
 
 #ifdef CONFIG_SMP
 extern void __inquire_remote_apic(int apicid);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a2fd72e..f98d84c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -186,7 +186,7 @@ static struct resource lapic_resource = {
 	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
 };
 
-static unsigned int calibration_result;
+unsigned int lapic_timer_frequency = 0;
 
 static void apic_pm_activate(void);
 
@@ -454,7 +454,7 @@ static void lapic_timer_setup(enum clock_event_mode mode,
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 	case CLOCK_EVT_MODE_ONESHOT:
-		__setup_APIC_LVTT(calibration_result,
+		__setup_APIC_LVTT(lapic_timer_frequency,
 				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
@@ -638,6 +638,25 @@ static int __init calibrate_APIC_clock(void)
 	long delta, deltatsc;
 	int pm_referenced = 0;
 
+	/**
+	 * check if lapic timer has already been calibrated by platform
+	 * specific routine, such as tsc calibration code. if so, we just fill
+	 * in the clockevent structure and return.
+	 */
+
+	if (lapic_timer_frequency) {
+		apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n",
+				lapic_timer_frequency);
+		lapic_clockevent.mult = div_sc(lapic_timer_frequency/APIC_DIVISOR,
+					TICK_NSEC, lapic_clockevent.shift);
+		lapic_clockevent.max_delta_ns =
+			clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
+		lapic_clockevent.min_delta_ns =
+			clockevent_delta2ns(0xF, &lapic_clockevent);
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+		return 0;
+	}
+
 	local_irq_disable();
 
 	/* Replace the global interrupt handler */
@@ -679,12 +698,12 @@ static int __init calibrate_APIC_clock(void)
 	lapic_clockevent.min_delta_ns =
 		clockevent_delta2ns(0xF, &lapic_clockevent);
 
-	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
+	lapic_timer_frequency = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
 
 	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
 	apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult);
 	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
-		    calibration_result);
+		    lapic_timer_frequency);
 
 	if (cpu_has_tsc) {
 		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
@@ -695,13 +714,13 @@ static int __init calibrate_APIC_clock(void)
 
 	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
 		    "%u.%04u MHz.\n",
-		    calibration_result / (1000000 / HZ),
-		    calibration_result % (1000000 / HZ));
+		    lapic_timer_frequency / (1000000 / HZ),
+		    lapic_timer_frequency % (1000000 / HZ));
 
 	/*
 	 * Do a sanity check on the APIC calibration result
 	 */
-	if (calibration_result < (1000000 / HZ)) {
+	if (lapic_timer_frequency < (1000000 / HZ)) {
 		local_irq_enable();
 		pr_warning("APIC frequency too slow, disabling apic timer\n");
 		return -1;