From: Joao Pinto Date: Fri, 10 Mar 2017 18:24:59 +0000 (+0000) Subject: net: stmmac: configuration of CBS in case of a TX AVB queue X-Git-Tag: v4.14-rc1~960^3~465^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=19d9187317979cf0c25f67017d2676149abc46b2;p=platform%2Fkernel%2Flinux-rpi.git net: stmmac: configuration of CBS in case of a TX AVB queue This patch adds the configuration of the AVB Credit-Based Shaper. Signed-off-by: Joao Pinto Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 04a258e..a7b0e41 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -92,8 +92,15 @@ Optional properties: - snps,tx-sched-dwrr: Deficit Weighted Round Robin - snps,tx-sched-sp: Strict priority - For each TX queue - - snps,weight: TX queue weight (if using a weighted algorithm) - + - snps,weight: TX queue weight (if using a DCB weight algorithm) + - Choose one of these modes: + - snps,dcb-algorithm: TX queue will be working in DCB + - snps,avb-algorithm: TX queue will be working in AVB + - Configure Credit Base Shaper (if AVB Mode selected): + - snps,send_slope: enable Low Power Interface + - snps,idle_slope: unlock on WoL + - snps,high_credit: max write outstanding req. limit + - snps,low_credit: max read outstanding req. limit Examples: stmmac_axi_setup: stmmac-axi-config { @@ -112,10 +119,19 @@ Examples: }; mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <1>; + snps,tx-queues-to-use = <2>; snps,tx-sched-wrr; queue0 { snps,weight = <0x10>; + snps,dcb-algorithm; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; }; }; diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index e7fb985..9f0d26d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -467,6 +467,10 @@ struct stmmac_ops { u32 weight, u32 queue); /* RX MTL queue to RX dma mapping */ void (*map_mtl_to_dma)(struct mac_device_info *hw, u32 queue, u32 chan); + /* Configure AV Algorithm */ + void (*config_cbs)(struct mac_device_info *hw, u32 send_slope, + u32 idle_slope, u32 high_credit, u32 low_credit, + u32 queue); /* Dump MAC registers */ void (*dump_regs)(struct mac_device_info *hw, u32 *reg_space); /* Handle extra events on specific interrupts hw dependent */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h index 1ddf75c..54bcdb4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h @@ -233,6 +233,15 @@ enum power_event { #define MTL_OP_MODE_RTC_96 (2 << MTL_OP_MODE_RTC_SHIFT) #define MTL_OP_MODE_RTC_128 (3 << MTL_OP_MODE_RTC_SHIFT) +/* MTL ETS Control register */ +#define MTL_ETS_CTRL_BASE_ADDR 0x00000d10 +#define MTL_ETS_CTRL_BASE_OFFSET 0x40 +#define MTL_ETSX_CTRL_BASE_ADDR(x) (MTL_ETS_CTRL_BASE_ADDR + \ + ((x) * MTL_ETS_CTRL_BASE_OFFSET)) + +#define MTL_ETS_CTRL_CC BIT(3) +#define MTL_ETS_CTRL_AVALG BIT(2) + /* MTL Queue Quantum Weight */ #define MTL_TXQ_WEIGHT_BASE_ADDR 0x00000d18 #define MTL_TXQ_WEIGHT_BASE_OFFSET 0x40 @@ -240,6 +249,30 @@ enum power_event { ((x) * MTL_TXQ_WEIGHT_BASE_OFFSET)) #define MTL_TXQ_WEIGHT_ISCQW_MASK GENMASK(20, 0) +/* MTL sendSlopeCredit register */ +#define MTL_SEND_SLP_CRED_BASE_ADDR 0x00000d1c +#define MTL_SEND_SLP_CRED_OFFSET 0x40 +#define MTL_SEND_SLP_CREDX_BASE_ADDR(x) (MTL_SEND_SLP_CRED_BASE_ADDR + \ + ((x) * MTL_SEND_SLP_CRED_OFFSET)) + +#define MTL_SEND_SLP_CRED_SSC_MASK GENMASK(13, 0) + +/* MTL hiCredit register */ +#define MTL_HIGH_CRED_BASE_ADDR 0x00000d20 +#define MTL_HIGH_CRED_OFFSET 0x40 +#define MTL_HIGH_CREDX_BASE_ADDR(x) (MTL_HIGH_CRED_BASE_ADDR + \ + ((x) * MTL_HIGH_CRED_OFFSET)) + +#define MTL_HIGH_CRED_HC_MASK GENMASK(28, 0) + +/* MTL loCredit register */ +#define MTL_LOW_CRED_BASE_ADDR 0x00000d24 +#define MTL_LOW_CRED_OFFSET 0x40 +#define MTL_LOW_CREDX_BASE_ADDR(x) (MTL_LOW_CRED_BASE_ADDR + \ + ((x) * MTL_LOW_CRED_OFFSET)) + +#define MTL_HIGH_CRED_LC_MASK GENMASK(28, 0) + /* MTL debug */ #define MTL_DEBUG_TXSTSFSTS BIT(5) #define MTL_DEBUG_TXFSTS BIT(4) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 670cfee..10599db 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -66,9 +66,9 @@ static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 value = readl(ioaddr + GMAC_RXQ_CTRL0); value &= GMAC_RX_QUEUE_CLEAR(queue); - if (mode == MTL_RX_AVB) + if (mode == MTL_QUEUE_AVB) value |= GMAC_RX_AV_QUEUE_ENABLE(queue); - else if (mode == MTL_RX_DCB) + else if (mode == MTL_QUEUE_DCB) value |= GMAC_RX_DCB_QUEUE_ENABLE(queue); writel(value, ioaddr + GMAC_RXQ_CTRL0); @@ -155,6 +155,47 @@ static void dwmac4_map_mtl_dma(struct mac_device_info *hw, u32 queue, u32 chan) writel(value, ioaddr + MTL_RXQ_DMA_MAP1); } +static void dwmac4_config_cbs(struct mac_device_info *hw, + u32 send_slope, u32 idle_slope, + u32 high_credit, u32 low_credit, u32 queue) +{ + void __iomem *ioaddr = hw->pcsr; + u32 value; + + pr_debug("Queue %d configured as AVB. Parameters:\n", queue); + pr_debug("\tsend_slope: 0x%08x\n", send_slope); + pr_debug("\tidle_slope: 0x%08x\n", idle_slope); + pr_debug("\thigh_credit: 0x%08x\n", high_credit); + pr_debug("\tlow_credit: 0x%08x\n", low_credit); + + /* enable AV algorithm */ + value = readl(ioaddr + MTL_ETSX_CTRL_BASE_ADDR(queue)); + value |= MTL_ETS_CTRL_AVALG; + value |= MTL_ETS_CTRL_CC; + writel(value, ioaddr + MTL_ETSX_CTRL_BASE_ADDR(queue)); + + /* configure send slope */ + value = readl(ioaddr + MTL_SEND_SLP_CREDX_BASE_ADDR(queue)); + value &= ~MTL_SEND_SLP_CRED_SSC_MASK; + value |= send_slope & MTL_SEND_SLP_CRED_SSC_MASK; + writel(value, ioaddr + MTL_SEND_SLP_CREDX_BASE_ADDR(queue)); + + /* configure idle slope (same register as tx weight) */ + dwmac4_set_mtl_tx_queue_weight(hw, idle_slope, queue); + + /* configure high credit */ + value = readl(ioaddr + MTL_HIGH_CREDX_BASE_ADDR(queue)); + value &= ~MTL_HIGH_CRED_HC_MASK; + value |= high_credit & MTL_HIGH_CRED_HC_MASK; + writel(value, ioaddr + MTL_HIGH_CREDX_BASE_ADDR(queue)); + + /* configure high credit */ + value = readl(ioaddr + MTL_LOW_CREDX_BASE_ADDR(queue)); + value &= ~MTL_HIGH_CRED_LC_MASK; + value |= low_credit & MTL_HIGH_CRED_LC_MASK; + writel(value, ioaddr + MTL_LOW_CREDX_BASE_ADDR(queue)); +} + static void dwmac4_dump_regs(struct mac_device_info *hw, u32 *reg_space) { void __iomem *ioaddr = hw->pcsr; @@ -566,6 +607,7 @@ static const struct stmmac_ops dwmac4_ops = { .prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms, .set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight, .map_mtl_to_dma = dwmac4_map_mtl_dma, + .config_cbs = dwmac4_config_cbs, .dump_regs = dwmac4_dump_regs, .host_irq_status = dwmac4_irq_status, .host_mtl_irq_status = dwmac4_irq_mtl_status, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 2449487..915636f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1671,6 +1671,31 @@ static void stmmac_set_tx_queue_weight(struct stmmac_priv *priv) } /** + * stmmac_configure_cbs - Configure CBS in TX queue + * @priv: driver private structure + * Description: It is used for configuring CBS in AVB TX queues + */ +static void stmmac_configure_cbs(struct stmmac_priv *priv) +{ + u32 tx_queues_count = priv->plat->tx_queues_to_use; + u32 mode_to_use; + u32 queue; + + for (queue = 0; queue < tx_queues_count; queue++) { + mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use; + if (mode_to_use == MTL_QUEUE_DCB) + continue; + + priv->hw->mac->config_cbs(priv->hw, + priv->plat->tx_queues_cfg[queue].send_slope, + priv->plat->tx_queues_cfg[queue].idle_slope, + priv->plat->tx_queues_cfg[queue].high_credit, + priv->plat->tx_queues_cfg[queue].low_credit, + queue); + } +} + +/** * stmmac_rx_queue_dma_chan_map - Map RX queue to RX dma channel * @priv: driver private structure * Description: It is used for mapping RX queues to RX dma channels @@ -1710,6 +1735,10 @@ static void stmmac_mtl_configuration(struct stmmac_priv *priv) priv->hw->mac->prog_mtl_tx_algorithms(priv->hw, priv->plat->tx_sched_algorithm); + /* Configure CBS in AVB TX queues */ + if (tx_queues_count > 1 && priv->hw->mac->config_cbs) + stmmac_configure_cbs(priv); + /* Map RX MTL to DMA channels */ if (rx_queues_count > 1 && priv->hw->mac->map_mtl_to_dma) stmmac_rx_queue_dma_chan_map(priv); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 0b76e3d..37f550a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -171,11 +171,11 @@ static void stmmac_mtl_setup(struct platform_device *pdev, break; if (of_property_read_bool(q_node, "snps,dcb-algorithm")) - plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_DCB; + plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; else if (of_property_read_bool(q_node, "snps,avb-algorithm")) - plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_AVB; + plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; else - plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_DCB; + plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; if (of_property_read_u8(q_node, "snps,map-to-dma-channel", &plat->rx_queues_cfg[queue].chan)) @@ -212,6 +212,29 @@ static void stmmac_mtl_setup(struct platform_device *pdev, &plat->tx_queues_cfg[queue].weight)) plat->tx_queues_cfg[queue].weight = 0x10 + queue; + if (of_property_read_bool(q_node, "snps,dcb-algorithm")) { + plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; + } else if (of_property_read_bool(q_node, + "snps,avb-algorithm")) { + plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; + + /* Credit Base Shaper parameters used by AVB */ + if (of_property_read_u32(q_node, "snps,send_slope", + &plat->tx_queues_cfg[queue].send_slope)) + plat->tx_queues_cfg[queue].send_slope = 0x0; + if (of_property_read_u32(q_node, "snps,idle_slope", + &plat->tx_queues_cfg[queue].idle_slope)) + plat->tx_queues_cfg[queue].idle_slope = 0x0; + if (of_property_read_u32(q_node, "snps,high_credit", + &plat->tx_queues_cfg[queue].high_credit)) + plat->tx_queues_cfg[queue].high_credit = 0x0; + if (of_property_read_u32(q_node, "snps,low_credit", + &plat->tx_queues_cfg[queue].low_credit)) + plat->tx_queues_cfg[queue].low_credit = 0x0; + } else { + plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; + } + queue++; } diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 266ff2af9..be47b85 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -55,9 +55,9 @@ #define MTL_RX_ALGORITHM_SP 0x4 #define MTL_RX_ALGORITHM_WSP 0x5 -/* RX Queue Mode */ -#define MTL_RX_DCB 0x0 -#define MTL_RX_AVB 0x1 +/* RX/TX Queue Mode */ +#define MTL_QUEUE_DCB 0x0 +#define MTL_QUEUE_AVB 0x1 /* The MDC clock could be set higher than the IEEE 802.3 * specified frequency limit 0f 2.5 MHz, by programming a clock divider @@ -131,6 +131,12 @@ struct stmmac_rxq_cfg { struct stmmac_txq_cfg { u8 weight; + u8 mode_to_use; + /* Credit Base Shaper parameters */ + u32 send_slope; + u32 idle_slope; + u32 high_credit; + u32 low_credit; }; struct plat_stmmacenet_data {