From: H. Nikolaus Schaller Date: Wed, 23 Dec 2020 10:30:21 +0000 (+0100) Subject: ARM: dts; gta04: SPI panel chip select is active low X-Git-Tag: accepted/tizen/unified/20230118.172025~6219^2~2^2~28 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=181739822cf6f8f4e12b173913af2967a28906c0;p=platform%2Fkernel%2Flinux-rpi.git ARM: dts; gta04: SPI panel chip select is active low With the arrival of commit 2fee9583198eb9 ("spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors") it was clarified what the proper state for cs-gpios should be, even if the flag is ignored. The driver code is doing the right thing since 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") The chip-select of the td028ttec1 panel is active-low, so we must omit spi-cs-high; attribute (already removed by separate patch) and should now use GPIO_ACTIVE_LOW for the client device description to be fully consistent. Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") CC: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 003202d..7b8c18e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -114,7 +114,7 @@ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; num-chipselects = <1>; /* lcd panel */