From: Kevin Cheng Date: Tue, 10 Jan 2017 03:14:29 +0000 (-0200) Subject: [media] em28xx: support for Hauppauge WinTV-dualHD 01595 ATSC/QAM X-Git-Tag: v4.14-rc1~332^2~779 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=1586342e428d80e53f9a926b2e238d2175b9f5b5;p=platform%2Fkernel%2Flinux-rpi.git [media] em28xx: support for Hauppauge WinTV-dualHD 01595 ATSC/QAM Hauppauge WinTV-dualHD model 01595 is a USB 2.0 dual ATSC/QAM tuner with the following components: USB bridge: Empia em28274 Demodulator: 2x LG LGDT3306a at addresses 0xb2 and 0x1c Tuner: 2x Silicon Labs si2157 at addresses 0xc0 and 0xc4 This patch enables only the first tuner. Signed-off-by: Kevin Cheng Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index 23c6749..5f90d08 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -509,6 +509,7 @@ static struct em28xx_reg_seq plex_px_bcud[] = { /* * 2040:0265 Hauppauge WinTV-dualHD DVB + * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM * reg 0x80/0x84: * GPIO_0: Yellow LED tuner 1, 0=on, 1=off * GPIO_1: Green LED tuner 1, 0=on, 1=off @@ -2389,6 +2390,21 @@ struct em28xx_board em28xx_boards[] = { .ir_codes = RC_MAP_HAUPPAUGE, .leds = hauppauge_dualhd_leds, }, + /* + * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM). + * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 + */ + [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { + .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + .tuner_type = TUNER_ABSENT, + .tuner_gpio = hauppauge_dualhd_dvb, + .has_dvb = 1, + .ir_codes = RC_MAP_HAUPPAUGE, + .leds = hauppauge_dualhd_leds, + }, }; EXPORT_SYMBOL_GPL(em28xx_boards); @@ -2514,6 +2530,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, { USB_DEVICE(0x2040, 0x0265), .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, + { USB_DEVICE(0x2040, 0x026d), + .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, { USB_DEVICE(0x0438, 0xb002), .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, { USB_DEVICE(0x2001, 0xf112), @@ -2945,6 +2963,7 @@ static void em28xx_card_setup(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: + case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: { struct tveeprom tv; diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c index 75a75da..82edd37 100644 --- a/drivers/media/usb/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -37,6 +37,7 @@ #include "lgdt330x.h" #include "lgdt3305.h" +#include "lgdt3306a.h" #include "zl10353.h" #include "s5h1409.h" #include "mt2060.h" @@ -920,6 +921,17 @@ static struct tda18271_config pinnacle_80e_dvb_config = { .role = TDA18271_MASTER, }; +static struct lgdt3306a_config hauppauge_01595_lgdt3306a_config = { + .qam_if_khz = 4000, + .vsb_if_khz = 3250, + .spectral_inversion = 0, + .deny_i2c_rptr = 0, + .mpeg_mode = LGDT3306A_MPEG_SERIAL, + .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE, + .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH, + .xtalMHz = 25, +}; + /* ------------------------------------------------------------------ */ static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev) @@ -1950,6 +1962,68 @@ static int em28xx_dvb_init(struct em28xx *dev) } break; + case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: + { + struct i2c_adapter *adapter; + struct i2c_client *client; + struct i2c_board_info info = {}; + struct lgdt3306a_config lgdt3306a_config; + struct si2157_config si2157_config = {}; + + /* attach demod */ + lgdt3306a_config = hauppauge_01595_lgdt3306a_config; + lgdt3306a_config.fe = &dvb->fe[0]; + lgdt3306a_config.i2c_adapter = &adapter; + strlcpy(info.type, "lgdt3306a", sizeof(info.type)); + info.addr = 0x59; + info.platform_data = &lgdt3306a_config; + request_module(info.type); + client = i2c_new_device(&dev->i2c_adap[dev->def_i2c_bus], + &info); + if (client == NULL || client->dev.driver == NULL) { + result = -ENODEV; + goto out_free; + } + + if (!try_module_get(client->dev.driver->owner)) { + i2c_unregister_device(client); + result = -ENODEV; + goto out_free; + } + + dvb->i2c_client_demod = client; + + /* attach tuner */ + si2157_config.fe = dvb->fe[0]; + si2157_config.if_port = 1; + si2157_config.inversion = 1; +#ifdef CONFIG_MEDIA_CONTROLLER_DVB + si2157_config.mdev = dev->media_dev; +#endif + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "si2157", sizeof(info.type)); + info.addr = 0x60; + info.platform_data = &si2157_config; + request_module(info.type); + + client = i2c_new_device(adapter, &info); + if (client == NULL || client->dev.driver == NULL) { + module_put(dvb->i2c_client_demod->dev.driver->owner); + i2c_unregister_device(dvb->i2c_client_demod); + result = -ENODEV; + goto out_free; + } + if (!try_module_get(client->dev.driver->owner)) { + i2c_unregister_device(client); + module_put(dvb->i2c_client_demod->dev.driver->owner); + i2c_unregister_device(dvb->i2c_client_demod); + result = -ENODEV; + goto out_free; + } + + dvb->i2c_client_tuner = client; + } + break; default: dev_err(&dev->intf->dev, "The frontend of your DVB/ATSC card isn't supported yet\n"); diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index ca59e2d..e9f37995 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -147,6 +147,7 @@ #define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 97 #define EM28178_BOARD_PLEX_PX_BCUD 98 #define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99 +#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 100 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4