From: Ilpo Järvinen Date: Tue, 8 Nov 2022 12:19:49 +0000 (+0200) Subject: serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs X-Git-Tag: v5.15.92~1990 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=118b52c2ae085aa1aef55f7cabace509acfff4a4;p=platform%2Fkernel%2Flinux-rpi.git serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs commit a931237cbea256aff13bb403da13a97b2d1605d9 upstream. DW UART sometimes triggers IIR_RDI during DMA Rx when IIR_RX_TIMEOUT should have been triggered instead. Since IIR_RDI has higher priority than IIR_RX_TIMEOUT, this causes the Rx to hang into interrupt loop. The problem seems to occur at least with some combinations of small-sized transfers (I've reproduced the problem on Elkhart Lake PSE UARTs). If there's already an on-going Rx DMA and IIR_RDI triggers, fall graciously back to non-DMA Rx. That is, behave as if IIR_RX_TIMEOUT had occurred. 8250_omap already considers IIR_RDI similar to this change so its nothing unheard of. Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling") Cc: Co-developed-by: Srikanth Thokala Signed-off-by: Srikanth Thokala Co-developed-by: Aman Kumar Signed-off-by: Aman Kumar Signed-off-by: Ilpo Järvinen Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20221108121952.5497-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index edb9750..d7ab2ff 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1885,6 +1885,10 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status); static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir) { switch (iir & 0x3f) { + case UART_IIR_RDI: + if (!up->dma->rx_running) + break; + fallthrough; case UART_IIR_RX_TIMEOUT: serial8250_rx_dma_flush(up); fallthrough;