From: Martin Kaiser Date: Sun, 18 Jul 2021 17:36:10 +0000 (+0200) Subject: staging: rtl8188eu: remove cut_mask field from wl_pwr_cfg X-Git-Tag: v5.15~425^2~444 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=1126df74797609e12587e2bbcc7155f50f53af25;p=platform%2Fkernel%2Flinux-starfive.git staging: rtl8188eu: remove cut_mask field from wl_pwr_cfg We're no longer matching power transitions and commands against a power cut version mask. The cut_mask field from struct wl_pwr_cfg can be removed. It was set to PWR_CUT_ALL_MSK for all remaining commands. Signed-off-by: Martin Kaiser Link: https://lore.kernel.org/r/20210718173610.894-10-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8188eu/include/pwrseq.h b/drivers/staging/rtl8188eu/include/pwrseq.h index caa6bf7..5a7b420 100644 --- a/drivers/staging/rtl8188eu/include/pwrseq.h +++ b/drivers/staging/rtl8188eu/include/pwrseq.h @@ -34,21 +34,21 @@ * }, * comment here */ \ - {0x0006, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + {0x0006, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ /* wait till 0x04[17] = 1 power ready*/ \ - {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \ + {0x0002, PWR_CMD_WRITE, BIT(0) | BIT(1), 0}, \ /* 0x02[1:0] = 0 reset BB*/ \ - {0x0026, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ + {0x0026, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ /*0x24[23] = 2b'01 schmit trigger */ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), 0}, \ + {0x0005, PWR_CMD_WRITE, BIT(7), 0}, \ /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \ + {0x0005, PWR_CMD_WRITE, BIT(4) | BIT(3), 0}, \ /*0x04[12:11] = 2b'00 disable WL suspend*/ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + {0x0005, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ /*0x04[8] = 1 polling until return 0*/ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(0), 0}, \ + {0x0005, PWR_CMD_POLLING, BIT(0), 0}, \ /*wait till 0x04[8] = 0*/ \ - {0x0023, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \ + {0x0023, PWR_CMD_WRITE, BIT(4), 0}, \ /*LDO normal mode*/ #define RTL8188E_TRANS_ACT_TO_CARDEMU \ @@ -57,13 +57,13 @@ * }, * comments here */ \ - {0x001F, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, \ + {0x001F, PWR_CMD_WRITE, 0xFF, 0}, \ /*0x1F[7:0] = 0 turn off RF*/ \ - {0x0023, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + {0x0023, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ /*LDO Sleep mode*/ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + {0x0005, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ /*0x04[9] = 1 turn off MAC by HW state machine*/ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, BIT(1), 0}, \ + {0x0005, PWR_CMD_POLLING, BIT(1), 0}, \ /*wait till 0x04[9] = 0 polling until return 0 to disable*/ #define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \ @@ -72,15 +72,15 @@ * value }, * comments here */ \ - {0x0026, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ + {0x0026, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ /*0x24[23] = 2b'01 schmit trigger */ \ - {0x0005, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \ + {0x0005, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \ /*0x04[12:11] = 2b'01 enable WL suspend*/ \ - {0x0007, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0}, \ + {0x0007, PWR_CMD_WRITE, 0xFF, 0}, \ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ - {0x0041, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), 0}, \ + {0x0041, PWR_CMD_WRITE, BIT(4), 0}, \ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ - {0xfe10, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + {0xfe10, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ /*Set USB suspend enable local register 0xfe10[4]=1 */ /* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */ @@ -90,24 +90,24 @@ * value }, * comments here */ \ - {0x0522, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \ - {0x05F8, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x0522, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \ + {0x05F8, PWR_CMD_POLLING, 0xFF, 0}, \ /*Should be zero if no packet is transmitting*/ \ - {0x05F9, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x05F9, PWR_CMD_POLLING, 0xFF, 0}, \ /*Should be zero if no packet is transmitting*/ \ - {0x05FA, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x05FA, PWR_CMD_POLLING, 0xFF, 0}, \ /*Should be zero if no packet is transmitting*/ \ - {0x05FB, PWR_CUT_ALL_MSK, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x05FB, PWR_CMD_POLLING, 0xFF, 0}, \ /*Should be zero if no packet is transmitting*/ \ - {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(0), 0}, \ + {0x0002, PWR_CMD_WRITE, BIT(0), 0}, \ /*CCK and OFDM are disabled,and clock are gated*/ \ - {0x0002, PWR_CUT_ALL_MSK, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \ + {0x0002, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \ /*Delay 1us*/ \ - {0x0100, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, 0xFF, 0x3F}, \ + {0x0100, PWR_CMD_WRITE, 0xFF, 0x3F}, \ /*Reset MAC TRX*/ \ - {0x0101, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(1), 0}, \ + {0x0101, PWR_CMD_WRITE, BIT(1), 0}, \ /*check if removed later*/\ - {0x0553, PWR_CUT_ALL_MSK, PWR_CMD_WRITE, BIT(5), BIT(5)}, \ + {0x0553, PWR_CMD_WRITE, BIT(5), BIT(5)}, \ /*Respond TxOK to scheduler*/ #define RTL8188E_TRANS_END \ @@ -116,7 +116,7 @@ * value }, * comments here */ \ - {0xFFFF, PWR_CUT_ALL_MSK, PWR_CMD_END, 0, 0}, + {0xFFFF, PWR_CMD_END, 0, 0}, extern struct wl_pwr_cfg rtl8188E_power_on_flow [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS]; diff --git a/drivers/staging/rtl8188eu/include/pwrseqcmd.h b/drivers/staging/rtl8188eu/include/pwrseqcmd.h index a5eb95f..bfa0405 100644 --- a/drivers/staging/rtl8188eu/include/pwrseqcmd.h +++ b/drivers/staging/rtl8188eu/include/pwrseqcmd.h @@ -33,7 +33,6 @@ enum pwrseq_cmd_delat_unit { struct wl_pwr_cfg { u16 offset; - u8 cut_msk; u8 cmd:4; u8 msk; u8 value;