From: Pawel Laszczak <pawell@cadence.com>
Date: Wed, 7 Apr 2021 06:36:29 +0000 (+0200)
Subject: usb: cdnsp: Fixes issue with Configure Endpoint command
X-Git-Tag: accepted/tizen/unified/20230118.172025~7412^2~61^2
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=10076de33b5ed5b1e049593a611d2fd9eba60565;p=platform%2Fkernel%2Flinux-rpi.git

usb: cdnsp: Fixes issue with Configure Endpoint command

Patch adds flag EP_UNCONFIGURED to detect whether endpoint was
unconfigured. This flag is set in cdnsp_reset_device after Reset Device
command. Among others this command disables all non control endpoints.
Flag is used in cdnsp_gadget_ep_disable to protect controller against
invoking Configure Endpoint command on disabled endpoint. Lack of this
protection in some cases caused that Configure Endpoint command completed
with Context State Error code completion.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
---

diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c
index d7d4bdd..56707b6 100644
--- a/drivers/usb/cdns3/cdnsp-gadget.c
+++ b/drivers/usb/cdns3/cdnsp-gadget.c
@@ -727,7 +727,7 @@ int cdnsp_reset_device(struct cdnsp_device *pdev)
 	 * are in Disabled state.
 	 */
 	for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i)
-		pdev->eps[i].ep_state |= EP_STOPPED;
+		pdev->eps[i].ep_state |= EP_STOPPED | EP_UNCONFIGURED;
 
 	trace_cdnsp_handle_cmd_reset_dev(slot_ctx);
 
@@ -942,6 +942,7 @@ static int cdnsp_gadget_ep_enable(struct usb_ep *ep,
 
 	pep = to_cdnsp_ep(ep);
 	pdev = pep->pdev;
+	pep->ep_state &= ~EP_UNCONFIGURED;
 
 	if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED,
 			  "%s is already enabled\n", pep->name))
@@ -1023,9 +1024,13 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
 		goto finish;
 	}
 
-	cdnsp_cmd_stop_ep(pdev, pep);
 	pep->ep_state |= EP_DIS_IN_RROGRESS;
-	cdnsp_cmd_flush_ep(pdev, pep);
+
+	/* Endpoint was unconfigured by Reset Device command. */
+	if (!(pep->ep_state & EP_UNCONFIGURED)) {
+		cdnsp_cmd_stop_ep(pdev, pep);
+		cdnsp_cmd_flush_ep(pdev, pep);
+	}
 
 	/* Remove all queued USB requests. */
 	while (!list_empty(&pep->pending_list)) {
@@ -1043,10 +1048,12 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
 
 	cdnsp_endpoint_zero(pdev, pep);
 
-	ret = cdnsp_update_eps_configuration(pdev, pep);
+	if (!(pep->ep_state & EP_UNCONFIGURED))
+		ret = cdnsp_update_eps_configuration(pdev, pep);
+
 	cdnsp_free_endpoint_rings(pdev, pep);
 
-	pep->ep_state &= ~EP_ENABLED;
+	pep->ep_state &= ~(EP_ENABLED | EP_UNCONFIGURED);
 	pep->ep_state |= EP_STOPPED;
 
 finish:
diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h
index 6bbb265..783ca8f 100644
--- a/drivers/usb/cdns3/cdnsp-gadget.h
+++ b/drivers/usb/cdns3/cdnsp-gadget.h
@@ -835,6 +835,7 @@ struct cdnsp_ep {
 #define EP_WEDGE		BIT(4)
 #define EP0_HALTED_STATUS	BIT(5)
 #define EP_HAS_STREAMS		BIT(6)
+#define EP_UNCONFIGURED		BIT(7)
 
 	bool skip;
 };