From: Larry Finger Date: Thu, 15 Dec 2016 18:23:08 +0000 (-0600) Subject: rtlwifi: rtl8192c-common: Remove all instances of DBG_EMERG X-Git-Tag: v4.14-rc1~1433^2~129^2~9 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0fc30e9350befdc1b5c8367d208fb7e2d68c0031;p=platform%2Fkernel%2Flinux-rpi3.git rtlwifi: rtl8192c-common: Remove all instances of DBG_EMERG This is a step toward eliminating the RT_TRACE macros. Those calls that have DBG_EMERG as the level are always logged, and they represent error conditions, thus they are replaced with pr_err(). Signed-off-by: Larry Finger Cc: Ping-Ke Shih Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c index 9c3392a..f3fb31b 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c @@ -145,10 +145,8 @@ static void _rtl92c_write_fw(struct ieee80211_hw *hw, pageNums = size / FW_8192C_PAGE_SIZE; remainsize = size % FW_8192C_PAGE_SIZE; - if (pageNums > 4) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Page numbers should not greater then 4\n"); - } + if (pageNums > 4) + pr_err("Page numbers should not greater then 4\n"); for (page = 0; page < pageNums; page++) { offset = page * FW_8192C_PAGE_SIZE; @@ -180,15 +178,10 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw) (!(value32 & FWDL_ChkSum_rpt))); if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "chksum report faill ! REG_MCUFWDL:0x%08x .\n", - value32); + pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n", + value32); goto exit; } - - RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, - "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32); - value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL); value32 |= MCUFWDL_RDY; value32 &= ~WINTINI_RDY; @@ -198,20 +191,15 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw) do { value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL); - if (value32 & WINTINI_RDY) { - RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, - "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n", - value32); - err = 0; - goto exit; - } + if (value32 & WINTINI_RDY) + return 0; mdelay(FW_8192C_POLLING_DELAY); } while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT); - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32); + pr_err("Polling FW ready fail! REG_MCUFWDL:0x%08x.\n", + value32); exit: return err; @@ -251,8 +239,7 @@ int rtl92c_download_fw(struct ieee80211_hw *hw) err = _rtl92c_fw_free_to_go(hw); if (err) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Firmware is not ready to run!\n"); + pr_err("Firmware is not ready to run!\n"); } else { RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "Firmware is ready to run!\n"); @@ -327,8 +314,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw, while (!bwrite_sucess) { wait_writeh2c_limmit--; if (wait_writeh2c_limmit == 0) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Write H2C fail because no trigger for FW INT!\n"); + pr_err("Write H2C fail because no trigger for FW INT!\n"); break; } diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c index 32fc4b6..7c6e5d91 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c @@ -104,7 +104,7 @@ u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw, offset &= 0x3f; newoffset = offset; if (RT_CANNOT_IO(hw)) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n"); + pr_err("return all one\n"); return 0xFFFFFFFF; } tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD); @@ -152,7 +152,7 @@ void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw, struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath]; if (RT_CANNOT_IO(hw)) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n"); + pr_err("stop\n"); return; } offset &= 0x3f; @@ -209,7 +209,7 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw) rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw, BASEBAND_CONFIG_PHY_REG); if (!rtstatus) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n"); + pr_err("Write BB Reg Fail!!\n"); return false; } if (rtlphy->rf_type == RF_1T2R) { @@ -222,13 +222,13 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw) BASEBAND_CONFIG_PHY_REG); } if (!rtstatus) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n"); + pr_err("BB_PG Reg Fail!!\n"); return false; } rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB); if (!rtstatus) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n"); + pr_err("AGC Table Fail\n"); return false; } rtlphy->cck_high_power = @@ -860,8 +860,8 @@ bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw, currentcmd = &postcommoncmd[*step]; break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Invalid 'stage' = %d, Check it!\n", *stage); + pr_err("Invalid 'stage' = %d, Check it!\n", + *stage); return true; }