From: Rob Herring Date: Tue, 9 Nov 2021 16:17:07 +0000 (-0600) Subject: dt-bindings: Remove Netlogic bindings X-Git-Tag: v6.6.17~8800^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0e5f897708e8c6bd8da4069b0767b86059fcf0c1;p=platform%2Fkernel%2Flinux-rpi.git dt-bindings: Remove Netlogic bindings Support for Netlogic was removed in commit 95b8a5e0111a ("MIPS: Remove NETLOGIC support"). Remove the now unused bindings. The GPIO binding also includes "brcm,vulcan-gpio", but it appears to be unused as well as Broadcom Vulkan became Cavium ThunderX2 which is ACPI based. Cc: Linus Walleij Cc: Bartosz Golaszewski Cc: George Cherian Cc: Mark Brown Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring Acked-by: Mark Brown Link: https://lore.kernel.org/r/20211109161707.2209170-1-robh@kernel.org --- diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt deleted file mode 100644 index 47fc649..0000000 --- a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt +++ /dev/null @@ -1,49 +0,0 @@ -Netlogic XLP Family GPIO -======================== - -This GPIO driver is used for following Netlogic XLP SoCs: - XLP832, XLP316, XLP208, XLP980, XLP532 -This GPIO driver is also compatible with GPIO controller found on -Broadcom Vulcan ARM64. - -Required properties: -------------------- - -- compatible: Should be one of the following: - - "netlogic,xlp832-gpio": For Netlogic XLP832 - - "netlogic,xlp316-gpio": For Netlogic XLP316 - - "netlogic,xlp208-gpio": For Netlogic XLP208 - - "netlogic,xlp980-gpio": For Netlogic XLP980 - - "netlogic,xlp532-gpio": For Netlogic XLP532 - - "brcm,vulcan-gpio": For Broadcom Vulcan ARM64 -- reg: Physical base address and length of the controller's registers. -- #gpio-cells: Should be two. The first cell is the pin number and the second - cell is used to specify optional parameters (currently unused). -- gpio-controller: Marks the device node as a GPIO controller. -- nr-gpios: Number of GPIO pins supported by the controller. -- interrupt-cells: Should be two. The first cell is the GPIO Number. The - second cell is used to specify flags. The following subset of flags is - supported: - - trigger type: - 1 = low to high edge triggered. - 2 = high to low edge triggered. - 4 = active high level-sensitive. - 8 = active low level-sensitive. -- interrupts: Interrupt number for this device. -- interrupt-controller: Identifies the node as an interrupt controller. - -Example: - - gpio: xlp_gpio@34000 { - compatible = "netlogic,xlp316-gpio"; - reg = <0 0x34100 0x1000 - 0 0x35100 0x1000>; - #gpio-cells = <2>; - gpio-controller; - nr-gpios = <57>; - - #interrupt-cells = <2>; - interrupt-parent = <&pic>; - interrupts = <39>; - interrupt-controller; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt deleted file mode 100644 index f818ef5..0000000 --- a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt +++ /dev/null @@ -1,22 +0,0 @@ -Device tree configuration for the I2C controller on the XLP9xx/5xx SoC - -Required properties: -- compatible : should be "netlogic,xlp980-i2c" -- reg : bus address start and address range size of device -- interrupts : interrupt number - -Optional properties: -- clock-frequency : frequency of bus clock in Hz - Defaults to 100 KHz when the property is not specified - -Example: - -i2c0: i2c@113100 { - compatible = "netlogic,xlp980-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x113100 0x100>; - clock-frequency = <400000>; - interrupts = <30>; - interrupt-parent = <&pic>; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-xlp.txt b/Documentation/devicetree/bindings/spi/spi-xlp.txt deleted file mode 100644 index f4925ec..0000000 --- a/Documentation/devicetree/bindings/spi/spi-xlp.txt +++ /dev/null @@ -1,38 +0,0 @@ -SPI Master controller for Netlogic XLP MIPS64 SOCs -================================================== - -Currently this SPI controller driver is supported for the following -Netlogic XLP SoCs: - XLP832, XLP316, XLP208, XLP980, XLP532 - -Required properties: -- compatible : Should be "netlogic,xlp832-spi". -- #address-cells : Number of cells required to define a chip select address - on the SPI bus. -- #size-cells : Should be zero. -- reg : Should contain register location and length. -- clocks : Phandle of the spi clock -- interrupts : Interrupt number used by this controller. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt. - -Example: - - spi: xlp_spi@3a100 { - compatible = "netlogic,xlp832-spi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0x3a100 0x100>; - clocks = <&spi_clk>; - interrupts = <34>; - interrupt-parent = <&pic>; - - spi_nor@1 { - compatible = "spansion,s25sl12801"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; /* Chip Select */ - spi-max-frequency = <40000000>; - }; -};