From: Bingbu Cao Date: Wed, 15 Dec 2021 11:08:58 +0000 (+0100) Subject: media: ov8856: support device probe in non-zero ACPI D state X-Git-Tag: v6.1-rc5~2250^2~22 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0e014f1a8d546fb591c46c461fdb35244294daa1;p=platform%2Fkernel%2Flinux-starfive.git media: ov8856: support device probe in non-zero ACPI D state Tell ACPI device PM code that the driver supports the device being in non-zero ACPI D state when the driver's probe function is entered. Also do identification on the first access of the device, whether in probe or when starting streaming. Signed-off-by: Bingbu Cao Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c index c6c6050..8785764 100644 --- a/drivers/media/i2c/ov8856.c +++ b/drivers/media/i2c/ov8856.c @@ -1445,6 +1445,9 @@ struct ov8856 { const struct ov8856_lane_cfg *priv_lane; u8 modes_size; + + /* True if the device has been identified */ + bool identified; }; struct ov8856_lane_cfg { @@ -1685,6 +1688,71 @@ static int ov8856_write_reg_list(struct ov8856 *ov8856, return 0; } +static int ov8856_identify_module(struct ov8856 *ov8856) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd); + int ret; + u32 val; + + if (ov8856->identified) + return 0; + + ret = ov8856_read_reg(ov8856, OV8856_REG_CHIP_ID, + OV8856_REG_VALUE_24BIT, &val); + if (ret) + return ret; + + if (val != OV8856_CHIP_ID) { + dev_err(&client->dev, "chip id mismatch: %x!=%x", + OV8856_CHIP_ID, val); + return -ENXIO; + } + + ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, + OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING); + if (ret) + return ret; + + ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL, + OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO); + if (ret) { + dev_err(&client->dev, "failed to set otp mode"); + return ret; + } + + ret = ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL, + OV8856_REG_VALUE_08BIT, + OV8856_OTP_LOAD_CTRL_ENABLE); + if (ret) { + dev_err(&client->dev, "failed to enable load control"); + return ret; + } + + ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION, + OV8856_REG_VALUE_08BIT, &val); + if (ret) { + dev_err(&client->dev, "failed to read module revision"); + return ret; + } + + dev_info(&client->dev, "OV8856 revision %x (%s) at address 0x%02x\n", + val, + val == OV8856_2A_MODULE ? "2A" : + val == OV8856_1B_MODULE ? "1B" : "unknown revision", + client->addr); + + ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, + OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY); + if (ret) { + dev_err(&client->dev, "failed to exit streaming mode"); + return ret; + } + + ov8856->identified = true; + + return 0; +} + static int ov8856_update_digital_gain(struct ov8856 *ov8856, u32 d_gain) { int ret; @@ -1969,6 +2037,10 @@ static int ov8856_start_streaming(struct ov8856 *ov8856) const struct ov8856_reg_list *reg_list; int link_freq_index, ret; + ret = ov8856_identify_module(ov8856); + if (ret) + return ret; + link_freq_index = ov8856->cur_mode->link_freq_index; reg_list = &ov8856->priv_lane->link_freq_configs[link_freq_index].reg_list; @@ -2276,65 +2348,6 @@ static const struct v4l2_subdev_internal_ops ov8856_internal_ops = { .open = ov8856_open, }; -static int ov8856_identify_module(struct ov8856 *ov8856) -{ - struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd); - int ret; - u32 val; - - ret = ov8856_read_reg(ov8856, OV8856_REG_CHIP_ID, - OV8856_REG_VALUE_24BIT, &val); - if (ret) - return ret; - - if (val != OV8856_CHIP_ID) { - dev_err(&client->dev, "chip id mismatch: %x!=%x", - OV8856_CHIP_ID, val); - return -ENXIO; - } - - ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, - OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING); - if (ret) - return ret; - - ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL, - OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO); - if (ret) { - dev_err(&client->dev, "failed to set otp mode"); - return ret; - } - - ret = ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL, - OV8856_REG_VALUE_08BIT, - OV8856_OTP_LOAD_CTRL_ENABLE); - if (ret) { - dev_err(&client->dev, "failed to enable load control"); - return ret; - } - - ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION, - OV8856_REG_VALUE_08BIT, &val); - if (ret) { - dev_err(&client->dev, "failed to read module revision"); - return ret; - } - - dev_info(&client->dev, "OV8856 revision %x (%s) at address 0x%02x\n", - val, - val == OV8856_2A_MODULE ? "2A" : - val == OV8856_1B_MODULE ? "1B" : "unknown revision", - client->addr); - - ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, - OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY); - if (ret) { - dev_err(&client->dev, "failed to exit streaming mode"); - return ret; - } - - return 0; -} static int ov8856_get_hwcfg(struct ov8856 *ov8856, struct device *dev) { @@ -2458,6 +2471,7 @@ static int ov8856_probe(struct i2c_client *client) { struct ov8856 *ov8856; int ret; + bool full_power; ov8856 = devm_kzalloc(&client->dev, sizeof(*ov8856), GFP_KERNEL); if (!ov8856) @@ -2472,16 +2486,19 @@ static int ov8856_probe(struct i2c_client *client) v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops); - ret = __ov8856_power_on(ov8856); - if (ret) { - dev_err(&client->dev, "failed to power on\n"); - return ret; - } + full_power = acpi_dev_state_d0(&client->dev); + if (full_power) { + ret = __ov8856_power_on(ov8856); + if (ret) { + dev_err(&client->dev, "failed to power on\n"); + return ret; + } - ret = ov8856_identify_module(ov8856); - if (ret) { - dev_err(&client->dev, "failed to find sensor: %d", ret); - goto probe_power_off; + ret = ov8856_identify_module(ov8856); + if (ret) { + dev_err(&client->dev, "failed to find sensor: %d", ret); + goto probe_power_off; + } } mutex_init(&ov8856->mutex); @@ -2511,11 +2528,9 @@ static int ov8856_probe(struct i2c_client *client) goto probe_error_media_entity_cleanup; } - /* - * Device is already turned on by i2c-core with ACPI domain PM. - * Enable runtime PM and turn off the device. - */ - pm_runtime_set_active(&client->dev); + /* Set the device's state to active if it's in D0 state. */ + if (full_power) + pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); pm_runtime_idle(&client->dev); @@ -2562,6 +2577,7 @@ static struct i2c_driver ov8856_i2c_driver = { }, .probe_new = ov8856_probe, .remove = ov8856_remove, + .flags = I2C_DRV_ACPI_WAIVE_D0_PROBE, }; module_i2c_driver(ov8856_i2c_driver);