From: Bartosz Golaszewski Date: Mon, 29 Apr 2019 16:37:09 +0000 (+0200) Subject: arm: davinci: remove dead code for PHYs used by DaVinci DM* boards X-Git-Tag: v2019.07-rc2~23^2~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0c565425927d024a8cc2d4783b61f9dd4c0a051f;p=platform%2Fkernel%2Fu-boot.git arm: davinci: remove dead code for PHYs used by DaVinci DM* boards The support for DaVinci DM* boards has been dropped a while ago. The code for all those PHYs is no longer used and they have their own proper PHY drivers in drivers/net/phy anyway. Remove all dead code. Signed-off-by: Bartosz Golaszewski --- diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index df43b1d..6887fe0 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_SOC_DM365) += dm365.o obj-$(CONFIG_SOC_DM644X) += dm644x.o obj-$(CONFIG_SOC_DM646X) += dm646x.o obj-$(CONFIG_SOC_DA850) += da850_pinmux.o -obj-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o diff --git a/arch/arm/mach-davinci/dp83848.c b/arch/arm/mach-davinci/dp83848.c deleted file mode 100644 index 7115d7b..0000000 --- a/arch/arm/mach-davinci/dp83848.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * National Semiconductor DP83848 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2007 Sergey Kubushyn - * - * -------------------------------------------------------- - */ - -#include -#include -#include -#include -#include "../../../drivers/net/ti/davinci_emac.h" - -#ifdef CONFIG_DRIVER_TI_EMAC - -#ifdef CONFIG_CMD_NET - -int dp83848_is_phy_connected(int phy_addr) -{ - u_int16_t id1, id2; - - if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1)) - return(0); - if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2)) - return(0); - - if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI)) - return(1); - - return(0); -} - -int dp83848_get_link_speed(int phy_addr) -{ - u_int16_t tmp; - volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR; - - if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) - return(0); - - if (!(tmp & DP83848_LINK_STATUS)) /* link up? */ - return(0); - - if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp)) - return(0); - - /* Speed doesn't matter, there is no setting for it in EMAC... */ - if (tmp & DP83848_DUPLEX) { - /* set DM644x EMAC for Full Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | - EMAC_MACCONTROL_FULLDUPLEX_ENABLE; - } else { - /*set DM644x EMAC for Half Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; - } - - return(1); -} - - -int dp83848_init_phy(int phy_addr) -{ - int ret = 1; - - if (!dp83848_get_link_speed(phy_addr)) { - /* Try another time */ - udelay(100000); - ret = dp83848_get_link_speed(phy_addr); - } - - /* Disable PHY Interrupts */ - davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0); - - return(ret); -} - - -int dp83848_auto_negotiate(int phy_addr) -{ - u_int16_t tmp; - - - if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) - return(0); - - /* Restart Auto_negotiation */ - tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */ - tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */ - davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); - - /* Set the Auto_negotiation Advertisement Register - * MII advertising for Next page, 100BaseTxFD and HD, - * 10BaseTFD and HD, IEEE 802.3 - */ - tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX | - DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3; - davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp); - - - /* Read Control Register */ - if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) - return(0); - - tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE; - davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); - - /* Restart Auto_negotiation */ - tmp |= DP83848_RESTART_AUTONEG; - davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); - - /*check AutoNegotiate complete */ - udelay(10000); - if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) - return(0); - - if (!(tmp & DP83848_AUTONEG_COMP)) - return(0); - - return (dp83848_get_link_speed(phy_addr)); -} - -#endif /* CONFIG_CMD_NET */ - -#endif /* CONFIG_DRIVER_ETHER */ diff --git a/arch/arm/mach-davinci/et1011c.c b/arch/arm/mach-davinci/et1011c.c deleted file mode 100644 index bfb7ff2..0000000 --- a/arch/arm/mach-davinci/et1011c.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * LSI ET1011C PHY Driver for TI DaVinci(TMS320DM6467) board. - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - */ - -#include -#include -#include -#include -#include "../../../drivers/net/ti/davinci_emac.h" - -#ifdef CONFIG_DRIVER_TI_EMAC - -#ifdef CONFIG_CMD_NET - -/* LSI PHYSICAL LAYER TRANSCEIVER ET1011C */ - -#define MII_PHY_CONFIG_REG 22 - -/* PHY Config bits */ -#define PHY_SYS_CLK_EN (1 << 4) - -int et1011c_get_link_speed(int phy_addr) -{ - u_int16_t data; - - if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &data) && (data & 0x04)) { - davinci_eth_phy_read(phy_addr, MII_PHY_CONFIG_REG, &data); - /* Enable 125MHz clock sourced from PHY */ - davinci_eth_phy_write(phy_addr, MII_PHY_CONFIG_REG, - data | PHY_SYS_CLK_EN); - return (1); - } - return (0); -} - -#endif /* CONFIG_CMD_NET */ - -#endif /* CONFIG_DRIVER_ETHER */ diff --git a/arch/arm/mach-davinci/include/mach/emac_defs.h b/arch/arm/mach-davinci/include/mach/emac_defs.h index b08d06d..2e85d84 100644 --- a/arch/arm/mach-davinci/include/mach/emac_defs.h +++ b/arch/arm/mach-davinci/include/mach/emac_defs.h @@ -69,25 +69,4 @@ #define EMAC_MDIO_CLOCK_FREQ 2000000 /* 2.0 MHz */ #endif -#define PHY_KSZ8873 (0x00221450) -int ksz8873_is_phy_connected(int phy_addr); -int ksz8873_get_link_speed(int phy_addr); -int ksz8873_init_phy(int phy_addr); -int ksz8873_auto_negotiate(int phy_addr); - -#define PHY_LXT972 (0x001378e2) -int lxt972_is_phy_connected(int phy_addr); -int lxt972_get_link_speed(int phy_addr); -int lxt972_init_phy(int phy_addr); -int lxt972_auto_negotiate(int phy_addr); - -#define PHY_DP83848 (0x20005c90) -int dp83848_is_phy_connected(int phy_addr); -int dp83848_get_link_speed(int phy_addr); -int dp83848_init_phy(int phy_addr); -int dp83848_auto_negotiate(int phy_addr); - -#define PHY_ET1011C (0x282f013) -int et1011c_get_link_speed(int phy_addr); - #endif /* _DM644X_EMAC_H_ */ diff --git a/arch/arm/mach-davinci/ksz8873.c b/arch/arm/mach-davinci/ksz8873.c deleted file mode 100644 index 85b0c26..0000000 --- a/arch/arm/mach-davinci/ksz8873.c +++ /dev/null @@ -1,52 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Micrel KSZ8873 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2011 Heiko Schocher - * - * based on: - * National Semiconductor DP83848 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2007 Sergey Kubushyn - * - * -------------------------------------------------------- - */ - -#include -#include -#include -#include -#include -#include "../../../drivers/net/ti/davinci_emac.h" - -int ksz8873_is_phy_connected(int phy_addr) -{ - u_int16_t dummy; - - return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy); -} - -int ksz8873_get_link_speed(int phy_addr) -{ - emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR; - - /* we always have a link to the switch, 100 FD */ - writel((EMAC_MACCONTROL_MIIEN_ENABLE | - EMAC_MACCONTROL_FULLDUPLEX_ENABLE), - &emac->MACCONTROL); - return 1; -} - - -int ksz8873_init_phy(int phy_addr) -{ - return 1; -} - - -int ksz8873_auto_negotiate(int phy_addr) -{ - return dp83848_get_link_speed(phy_addr); -} diff --git a/arch/arm/mach-davinci/lxt972.c b/arch/arm/mach-davinci/lxt972.c deleted file mode 100644 index b54f67d..0000000 --- a/arch/arm/mach-davinci/lxt972.c +++ /dev/null @@ -1,112 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Intel LXT971/LXT972 PHY Driver for TI DaVinci - * (TMS320DM644x) based boards. - * - * Copyright (C) 2007 Sergey Kubushyn - * - * -------------------------------------------------------- - */ - -#include -#include -#include -#include -#include -#include "../../../drivers/net/ti/davinci_emac.h" - -#ifdef CONFIG_DRIVER_TI_EMAC - -#ifdef CONFIG_CMD_NET - -int lxt972_is_phy_connected(int phy_addr) -{ - u_int16_t id1, id2; - - if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1)) - return(0); - if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2)) - return(0); - - if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0)) - return(1); - - return(0); -} - -int lxt972_get_link_speed(int phy_addr) -{ - u_int16_t stat1, tmp; - volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR; - - if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1)) - return(0); - - if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */ - return(0); - - if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) - return(0); - - tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE; - - davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp); - /* Read back */ - if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) - return(0); - - /* Speed doesn't matter, there is no setting for it in EMAC... */ - if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) { - /* set DM644x EMAC for Full Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | - EMAC_MACCONTROL_FULLDUPLEX_ENABLE; - } else { - /*set DM644x EMAC for Half Duplex */ - emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; - } - - return(1); -} - - -int lxt972_init_phy(int phy_addr) -{ - int ret = 1; - - if (!lxt972_get_link_speed(phy_addr)) { - /* Try another time */ - ret = lxt972_get_link_speed(phy_addr); - } - - /* Disable PHY Interrupts */ - davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0); - - return(ret); -} - - -int lxt972_auto_negotiate(int phy_addr) -{ - u_int16_t tmp; - - if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp)) - return(0); - - /* Restart Auto_negotiation */ - tmp |= BMCR_ANRESTART; - davinci_eth_phy_write(phy_addr, MII_BMCR, tmp); - - /*check AutoNegotiate complete */ - udelay (10000); - if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp)) - return(0); - - if (!(tmp & BMSR_ANEGCOMPLETE)) - return(0); - - return (lxt972_get_link_speed(phy_addr)); -} - -#endif /* CONFIG_CMD_NET */ - -#endif /* CONFIG_DRIVER_ETHER */