From: Samuel Holland Date: Wed, 13 Jul 2022 02:52:31 +0000 (-0500) Subject: pinctrl: sunxi: Refactor register/offset calculation X-Git-Tag: v6.6.17~6818^2~19 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0bb95ae2672f9e00f471598a515bf4e9c2005046;p=platform%2Fkernel%2Flinux-rpi.git pinctrl: sunxi: Refactor register/offset calculation Starting with the D1/D1s/T113 SoC, Allwinner changed the layout of the pinctrl registers. This new layout widens the drive level field, which affects the pull register offset and the overall bank size. As a first step to support this, combine the register and offset calculation functions, and refactor the math to depend on one constant for field widths instead of three. This minimizes the code size impact of making some of the factors dynamic. While rewriting these functions, move them to the implementation file, since that is the only file where they are used. And make the comment more generic, without mentioning specific offsets/sizes. The callers are updated to expect a shifted mask, and to use consistent terminology (reg/shift/mask/val). Reviewed-by: Heiko Stuebner Reviewed-by: Jernej Skrabec Tested-by: Heiko Stuebner Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20220713025233.27248-5-samuel@sholland.org Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index eb3d595..78b7ab6 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -46,6 +46,63 @@ static struct lock_class_key sunxi_pinctrl_irq_request_class; static struct irq_chip sunxi_pinctrl_edge_irq_chip; static struct irq_chip sunxi_pinctrl_level_irq_chip; +/* + * The sunXi PIO registers are organized as a series of banks, with registers + * for each bank in the following order: + * - Mux config + * - Data value + * - Drive level + * - Pull direction + * + * Multiple consecutive registers are used for fields wider than one bit. + * + * The following functions calculate the register and the bit offset to access. + * They take a pin number which is relative to the start of the current device. + */ +static void sunxi_mux_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * MUX_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + MUX_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(MUX_FIELD_WIDTH) - 1) << *shift; +} + +static void sunxi_data_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * DATA_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + DATA_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(DATA_FIELD_WIDTH) - 1) << *shift; +} + +static void sunxi_dlevel_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * DLEVEL_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + DLEVEL_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(DLEVEL_FIELD_WIDTH) - 1) << *shift; +} + +static void sunxi_pull_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * PULL_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + PULL_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(PULL_FIELD_WIDTH) - 1) << *shift; +} + static struct sunxi_pinctrl_group * sunxi_pinctrl_find_group_by_name(struct sunxi_pinctrl *pctl, const char *group) { @@ -452,21 +509,17 @@ static const struct pinctrl_ops sunxi_pctrl_ops = { }; static int sunxi_pconf_reg(unsigned pin, enum pin_config_param param, - u32 *offset, u32 *shift, u32 *mask) + u32 *reg, u32 *shift, u32 *mask) { switch (param) { case PIN_CONFIG_DRIVE_STRENGTH: - *offset = sunxi_dlevel_reg(pin); - *shift = sunxi_dlevel_offset(pin); - *mask = DLEVEL_PINS_MASK; + sunxi_dlevel_reg(pin, reg, shift, mask); break; case PIN_CONFIG_BIAS_PULL_UP: case PIN_CONFIG_BIAS_PULL_DOWN: case PIN_CONFIG_BIAS_DISABLE: - *offset = sunxi_pull_reg(pin); - *shift = sunxi_pull_offset(pin); - *mask = PULL_PINS_MASK; + sunxi_pull_reg(pin, reg, shift, mask); break; default: @@ -481,17 +534,17 @@ static int sunxi_pconf_get(struct pinctrl_dev *pctldev, unsigned pin, { struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); enum pin_config_param param = pinconf_to_config_param(*config); - u32 offset, shift, mask, val; + u32 reg, shift, mask, val; u16 arg; int ret; pin -= pctl->desc->pin_base; - ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask); + ret = sunxi_pconf_reg(pin, param, ®, &shift, &mask); if (ret < 0) return ret; - val = (readl(pctl->membase + offset) >> shift) & mask; + val = (readl(pctl->membase + reg) & mask) >> shift; switch (pinconf_to_config_param(*config)) { case PIN_CONFIG_DRIVE_STRENGTH: @@ -545,16 +598,15 @@ static int sunxi_pconf_set(struct pinctrl_dev *pctldev, unsigned pin, int i; for (i = 0; i < num_configs; i++) { + u32 arg, reg, shift, mask, val; enum pin_config_param param; unsigned long flags; - u32 offset, shift, mask, reg; - u32 arg, val; int ret; param = pinconf_to_config_param(configs[i]); arg = pinconf_to_config_argument(configs[i]); - ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask); + ret = sunxi_pconf_reg(pin, param, ®, &shift, &mask); if (ret < 0) return ret; @@ -591,9 +643,8 @@ static int sunxi_pconf_set(struct pinctrl_dev *pctldev, unsigned pin, } raw_spin_lock_irqsave(&pctl->lock, flags); - reg = readl(pctl->membase + offset); - reg &= ~(mask << shift); - writel(reg | val << shift, pctl->membase + offset); + writel((readl(pctl->membase + reg) & ~mask) | val << shift, + pctl->membase + reg); raw_spin_unlock_irqrestore(&pctl->lock, flags); } /* for each config */ @@ -719,16 +770,16 @@ static void sunxi_pmx_set(struct pinctrl_dev *pctldev, u8 config) { struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + u32 reg, shift, mask; unsigned long flags; - u32 val, mask; + + pin -= pctl->desc->pin_base; + sunxi_mux_reg(pin, ®, &shift, &mask); raw_spin_lock_irqsave(&pctl->lock, flags); - pin -= pctl->desc->pin_base; - val = readl(pctl->membase + sunxi_mux_reg(pin)); - mask = MUX_PINS_MASK << sunxi_mux_offset(pin); - writel((val & ~mask) | config << sunxi_mux_offset(pin), - pctl->membase + sunxi_mux_reg(pin)); + writel((readl(pctl->membase + reg) & ~mask) | config << shift, + pctl->membase + reg); raw_spin_unlock_irqrestore(&pctl->lock, flags); } @@ -861,43 +912,43 @@ static int sunxi_pinctrl_gpio_direction_input(struct gpio_chip *chip, static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset) { struct sunxi_pinctrl *pctl = gpiochip_get_data(chip); - u32 reg = sunxi_data_reg(offset); - u8 index = sunxi_data_offset(offset); bool set_mux = pctl->desc->irq_read_needs_mux && gpiochip_line_is_irq(chip, offset); u32 pin = offset + chip->base; - u32 val; + u32 reg, shift, mask, val; + + sunxi_data_reg(offset, ®, &shift, &mask); if (set_mux) sunxi_pmx_set(pctl->pctl_dev, pin, SUN4I_FUNC_INPUT); - val = (readl(pctl->membase + reg) >> index) & DATA_PINS_MASK; + val = (readl(pctl->membase + reg) & mask) >> shift; if (set_mux) sunxi_pmx_set(pctl->pctl_dev, pin, SUN4I_FUNC_IRQ); - return !!val; + return val; } static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct sunxi_pinctrl *pctl = gpiochip_get_data(chip); - u32 reg = sunxi_data_reg(offset); - u8 index = sunxi_data_offset(offset); + u32 reg, shift, mask, val; unsigned long flags; - u32 regval; + + sunxi_data_reg(offset, ®, &shift, &mask); raw_spin_lock_irqsave(&pctl->lock, flags); - regval = readl(pctl->membase + reg); + val = readl(pctl->membase + reg); if (value) - regval |= BIT(index); + val |= mask; else - regval &= ~(BIT(index)); + val &= ~mask; - writel(regval, pctl->membase + reg); + writel(val, pctl->membase + reg); raw_spin_unlock_irqrestore(&pctl->lock, flags); } diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h index 0f1aab5..efaa974 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h @@ -36,23 +36,15 @@ #define BANK_MEM_SIZE 0x24 #define MUX_REGS_OFFSET 0x0 +#define MUX_FIELD_WIDTH 4 #define DATA_REGS_OFFSET 0x10 +#define DATA_FIELD_WIDTH 1 #define DLEVEL_REGS_OFFSET 0x14 +#define DLEVEL_FIELD_WIDTH 2 #define PULL_REGS_OFFSET 0x1c +#define PULL_FIELD_WIDTH 2 #define PINS_PER_BANK 32 -#define MUX_PINS_PER_REG 8 -#define MUX_PINS_BITS 4 -#define MUX_PINS_MASK 0x0f -#define DATA_PINS_PER_REG 32 -#define DATA_PINS_BITS 1 -#define DATA_PINS_MASK 0x01 -#define DLEVEL_PINS_PER_REG 16 -#define DLEVEL_PINS_BITS 2 -#define DLEVEL_PINS_MASK 0x03 -#define PULL_PINS_PER_REG 16 -#define PULL_PINS_BITS 2 -#define PULL_PINS_MASK 0x03 #define IRQ_PER_BANK 32 @@ -222,83 +214,6 @@ struct sunxi_pinctrl { .irqnum = _irq, \ } -/* - * The sunXi PIO registers are organized as is: - * 0x00 - 0x0c Muxing values. - * 8 pins per register, each pin having a 4bits value - * 0x10 Pin values - * 32 bits per register, each pin corresponding to one bit - * 0x14 - 0x18 Drive level - * 16 pins per register, each pin having a 2bits value - * 0x1c - 0x20 Pull-Up values - * 16 pins per register, each pin having a 2bits value - * - * This is for the first bank. Each bank will have the same layout, - * with an offset being a multiple of 0x24. - * - * The following functions calculate from the pin number the register - * and the bit offset that we should access. - */ -static inline u32 sunxi_mux_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += MUX_REGS_OFFSET; - offset += pin % PINS_PER_BANK / MUX_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_mux_offset(u16 pin) -{ - u32 pin_num = pin % MUX_PINS_PER_REG; - return pin_num * MUX_PINS_BITS; -} - -static inline u32 sunxi_data_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += DATA_REGS_OFFSET; - offset += pin % PINS_PER_BANK / DATA_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_data_offset(u16 pin) -{ - u32 pin_num = pin % DATA_PINS_PER_REG; - return pin_num * DATA_PINS_BITS; -} - -static inline u32 sunxi_dlevel_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += DLEVEL_REGS_OFFSET; - offset += pin % PINS_PER_BANK / DLEVEL_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_dlevel_offset(u16 pin) -{ - u32 pin_num = pin % DLEVEL_PINS_PER_REG; - return pin_num * DLEVEL_PINS_BITS; -} - -static inline u32 sunxi_pull_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += PULL_REGS_OFFSET; - offset += pin % PINS_PER_BANK / PULL_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_pull_offset(u16 pin) -{ - u32 pin_num = pin % PULL_PINS_PER_REG; - return pin_num * PULL_PINS_BITS; -} - static inline u32 sunxi_irq_hw_bank_num(const struct sunxi_pinctrl_desc *desc, u8 bank) { if (!desc->irq_bank_map)