From: Ira Weiny <ira.weiny@intel.com>
Date: Thu, 17 Jun 2021 22:16:18 +0000 (-0700)
Subject: cxl/pci: Store memory capacity values
X-Git-Tag: accepted/tizen/unified/20230118.172025~6414^2~16
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0b9159d0ff21bc281dbb9ede06ad566330ac0943;p=platform%2Fkernel%2Flinux-rpi.git

cxl/pci: Store memory capacity values

The Identify Memory Device command returns information about the
volatile only and persistent only memory capacities.  Store those values
in the cxl_mem structure for later use.  While at it, reuse those
calculations to calculate the ram and pmem ranges.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210617221620.1904031-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---

diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 25345ec..22344fd 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -95,5 +95,9 @@ struct cxl_mem {
 
 	struct range pmem_range;
 	struct range ram_range;
+	u64 total_bytes;
+	u64 volatile_only_bytes;
+	u64 persistent_only_bytes;
+	u64 partition_align_bytes;
 };
 #endif /* __CXL_MEM_H__ */
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 47315bb..cf4f593 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -64,6 +64,15 @@ enum opcode {
 	CXL_MBOX_OP_MAX			= 0x10000
 };
 
+/*
+ * CXL 2.0 - Memory capacity multiplier
+ * See Section 8.2.9.5
+ *
+ * Volatile, Persistent, and Partition capacities are specified to be in
+ * multiples of 256MB - define a multiplier to convert to/from bytes.
+ */
+#define CXL_CAPACITY_MULTIPLIER SZ_256M
+
 /**
  * struct mbox_cmd - A command to be submitted to hardware.
  * @opcode: (input) The command set and command submitted to hardware.
@@ -1350,16 +1359,37 @@ static int cxl_mem_identify(struct cxl_mem *cxlm)
 	if (rc < 0)
 		return rc;
 
+	cxlm->total_bytes = le64_to_cpu(id.total_capacity);
+	cxlm->total_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	cxlm->volatile_only_bytes = le64_to_cpu(id.volatile_capacity);
+	cxlm->volatile_only_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	cxlm->persistent_only_bytes = le64_to_cpu(id.persistent_capacity);
+	cxlm->persistent_only_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	cxlm->partition_align_bytes = le64_to_cpu(id.partition_align);
+	cxlm->partition_align_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	dev_dbg(&cxlm->pdev->dev, "Identify Memory Device\n"
+		"     total_bytes = %#llx\n"
+		"     volatile_only_bytes = %#llx\n"
+		"     persistent_only_bytes = %#llx\n"
+		"     partition_align_bytes = %#llx\n",
+			cxlm->total_bytes,
+			cxlm->volatile_only_bytes,
+			cxlm->persistent_only_bytes,
+			cxlm->partition_align_bytes);
+
 	/*
 	 * TODO: enumerate DPA map, as 'ram' and 'pmem' do not alias.
 	 * For now, only the capacity is exported in sysfs
 	 */
 	cxlm->ram_range.start = 0;
-	cxlm->ram_range.end = le64_to_cpu(id.volatile_capacity) * SZ_256M - 1;
+	cxlm->ram_range.end = cxlm->volatile_only_bytes - 1;
 
 	cxlm->pmem_range.start = 0;
-	cxlm->pmem_range.end =
-		le64_to_cpu(id.persistent_capacity) * SZ_256M - 1;
+	cxlm->pmem_range.end = cxlm->persistent_only_bytes - 1;
 
 	cxlm->lsa_size = le32_to_cpu(id.lsa_size);
 	memcpy(cxlm->firmware_version, id.fw_revision, sizeof(id.fw_revision));