From: Bjorn Helgaas Date: Mon, 28 Nov 2016 22:17:41 +0000 (-0600) Subject: PCI: Add comments about ROM BAR updating X-Git-Tag: v4.14-rc1~1865^2~13^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0b457dde3cf8b7c76a60f8e960f21bbd4abdc416;p=platform%2Fkernel%2Flinux-rpi.git PCI: Add comments about ROM BAR updating pci_update_resource() updates a hardware BAR so its address matches the kernel's struct resource UNLESS it's a disabled ROM BAR. We only update those when we enable the ROM. It's not obvious from the code why ROM BARs should be handled specially. Apparently there are Matrox devices with defective ROM BARs that read as zero when disabled. That means that if pci_enable_rom() reads the disabled BAR, sets PCI_ROM_ADDRESS_ENABLE (without re-inserting the address), and writes it back, it would enable the ROM at address zero. Add comments and references to explain why we can't make the code look more rational. The code changes are from 755528c860b0 ("Ignore disabled ROM resources at setup") and 8085ce084c0f ("[PATCH] Fix PCI ROM mapping"). Link: https://lkml.org/lkml/2005/8/30/138 Signed-off-by: Bjorn Helgaas Reviewed-by: Gavin Shan --- diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 06663d3..b6edb18 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -35,6 +35,11 @@ int pci_enable_rom(struct pci_dev *pdev) if (res->flags & IORESOURCE_ROM_SHADOW) return 0; + /* + * Ideally pci_update_resource() would update the ROM BAR address, + * and we would only set the enable bit here. But apparently some + * devices have buggy ROM BARs that read as zero when disabled. + */ pcibios_resource_to_bus(pdev->bus, ®ion, res); pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr); rom_addr &= ~PCI_ROM_ADDRESS_MASK; diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 99c9e32..0454273 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -72,6 +72,12 @@ static void pci_std_update_resource(struct pci_dev *dev, int resno) if (resno < PCI_ROM_RESOURCE) { reg = PCI_BASE_ADDRESS_0 + 4 * resno; } else if (resno == PCI_ROM_RESOURCE) { + + /* + * Apparently some Matrox devices have ROM BARs that read + * as zero when disabled, so don't update ROM BARs unless + * they're enabled. See https://lkml.org/lkml/2005/8/30/138. + */ if (!(res->flags & IORESOURCE_ROM_ENABLE)) return;