From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Sun, 5 May 2013 15:52:56 +0000 (+0000)
Subject: mx23_olinuxino: Do not set voltage selection bit for SSP pads
X-Git-Tag: v2013.07-rc1~85^2~8
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0b323439a52daca171cf107a8f479a3ce18d1d3a;p=kernel%2Fu-boot.git

mx23_olinuxino: Do not set voltage selection bit for SSP pads

mx23 SSP pad registers do not contain voltage selection bit, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---

diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c
index 3755f29..6ba8c86 100644
--- a/board/olimex/mx23_olinuxino/spl_boot.c
+++ b/board/olimex/mx23_olinuxino/spl_boot.c
@@ -30,7 +30,7 @@
 #include <asm/arch/sys_proto.h>
 
 #define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_SSP	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_SSP	(MXS_PAD_8MA | MXS_PAD_PULLUP)
 
 const iomux_cfg_t iomux_setup[] = {
 	/* DUART */