From: Biju Das Date: Thu, 30 Mar 2023 11:16:27 +0000 (+0100) Subject: dt-bindings: timer: Document RZ/G2L MTU3a bindings X-Git-Tag: v6.6.7~2924^2~15 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0a9d6b54297e216199cbfd08c5e6a35cce152477;p=platform%2Fkernel%2Flinux-starfive.git dt-bindings: timer: Document RZ/G2L MTU3a bindings The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer channels and one 32-bit timer channel. It supports the following functions - Counter - Timer - PWM Signed-off-by: Biju Das Reviewed-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20230330111632.169434-2-biju.das.jz@bp.renesas.com --- diff --git a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml new file mode 100644 index 0000000..bffdab0 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml @@ -0,0 +1,302 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/renesas,rz-mtu3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a) + +maintainers: + - Biju Das + +description: | + This hardware block consists of eight 16-bit timer channels and one + 32- bit timer channel. It supports the following specifications: + - Pulse input/output: 28 lines max. + - Pulse input 3 lines + - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks + for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination + (when LWA = 1)) + - Operating frequency Up to 100 MHz + - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8] + - Waveform output on compare match + - Input capture function (noise filter setting available) + - Counter-clearing operation + - Simultaneous writing to multiple timer counters (TCNT) + (excluding MTU8). + - Simultaneous clearing on compare match or input capture + (excluding MTU8). + - Simultaneous input and output to registers in synchronization with + counter operations (excluding MTU8). + - Up to 12-phase PWM output in combination with synchronous operation + (excluding MTU8) + - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8] + - Buffer operation specifiable + - [MTU1, MTU2] + - Phase counting mode can be specified independently + - 32-bit phase counting mode can be specified for interlocked operation + of MTU1 and MTU2 (when TMDR3.LWA = 1) + - Cascade connection operation available + - [MTU3, MTU4, MTU6, and MTU7] + - Through interlocked operation of MTU3/4 and MTU6/7, the positive and + negative signals in six phases (12 phases in total) can be output in + complementary PWM and reset-synchronized PWM operation. + - In complementary PWM mode, values can be transferred from buffer + registers to temporary registers at crests and troughs of the timer- + counter values or when the buffer registers (TGRD registers in MTU4 + and MTU7) are written to. + - Double-buffering selectable in complementary PWM mode. + - [MTU3 and MTU4] + - Through interlocking with MTU0, a mode for driving AC synchronous + motors (brushless DC motors) by using complementary PWM output and + reset-synchronized PWM output is settable and allows the selection + of two types of waveform output (chopping or level). + - [MTU5] + - Capable of operation as a dead-time compensation counter. + - [MTU0/MTU5, MTU1, MTU2, and MTU8] + - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and + through interlocked operation with MTU0/MTU5 and MTU8. + - Interrupt-skipping function + - In complementary PWM mode, interrupts on crests and troughs of counter + values and triggers to start conversion by the A/D converter can be + skipped. + - Interrupt sources: 43 sources. + - Buffer operation: + - Automatic transfer of register data (transfer from the buffer + register to the timer register). + - Trigger generation + - A/D converter start triggers can be generated + - A/D converter start request delaying function enables A/D converter + to be started with any desired timing and to be synchronized with + PWM output. + - Low power consumption function + - The MTU3a can be placed in the module-stop state. + + There are two phase counting modes. 16-bit phase counting mode in which + MTU1 and MTU2 operate independently, and cascade connection 32-bit phase + counting mode in which MTU1 and MTU2 are cascaded. + + In phase counting mode, the phase difference between two external input + clocks is detected and the corresponding TCNT is incremented or + decremented. + The below counters are supported + count0 - MTU1 16-bit phase counting + count1 - MTU2 16-bit phase counting + count2 - MTU1+ MTU2 32-bit phase counting + + The module supports PWM mode{1,2}, Reset-synchronized PWM mode and + complementary PWM mode{1,2,3}. + + In complementary PWM mode, six positive-phase and six negative-phase PWM + waveforms (12 phases in total) with dead time can be output by + combining MTU{3,4} and MTU{6,7}. + + The below pwm channels are supported in pwm mode 1. + pwm0 - MTU0.MTIOC0A PWM mode 1 + pwm1 - MTU0.MTIOC0C PWM mode 1 + pwm2 - MTU1.MTIOC1A PWM mode 1 + pwm3 - MTU2.MTIOC2A PWM mode 1 + pwm4 - MTU3.MTIOC3A PWM mode 1 + pwm5 - MTU3.MTIOC3C PWM mode 1 + pwm6 - MTU4.MTIOC4A PWM mode 1 + pwm7 - MTU4.MTIOC4C PWM mode 1 + pwm8 - MTU6.MTIOC6A PWM mode 1 + pwm9 - MTU6.MTIOC6C PWM mode 1 + pwm10 - MTU7.MTIOC7A PWM mode 1 + pwm11 - MTU7.MTIOC7C PWM mode 1 + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-mtu3 # RZ/G2{L,LC} + - renesas,r9a07g054-mtu3 # RZ/V2L + - const: renesas,rz-mtu3 + + reg: + maxItems: 1 + + interrupts: + items: + - description: MTU0.TGRA input capture/compare match + - description: MTU0.TGRB input capture/compare match + - description: MTU0.TGRC input capture/compare match + - description: MTU0.TGRD input capture/compare match + - description: MTU0.TCNT overflow + - description: MTU0.TGRE compare match + - description: MTU0.TGRF compare match + - description: MTU1.TGRA input capture/compare match + - description: MTU1.TGRB input capture/compare match + - description: MTU1.TCNT overflow + - description: MTU1.TCNT underflow + - description: MTU2.TGRA input capture/compare match + - description: MTU2.TGRB input capture/compare match + - description: MTU2.TCNT overflow + - description: MTU2.TCNT underflow + - description: MTU3.TGRA input capture/compare match + - description: MTU3.TGRB input capture/compare match + - description: MTU3.TGRC input capture/compare match + - description: MTU3.TGRD input capture/compare match + - description: MTU3.TCNT overflow + - description: MTU4.TGRA input capture/compare match + - description: MTU4.TGRB input capture/compare match + - description: MTU4.TGRC input capture/compare match + - description: MTU4.TGRD input capture/compare match + - description: MTU4.TCNT overflow/underflow + - description: MTU5.TGRU input capture/compare match + - description: MTU5.TGRV input capture/compare match + - description: MTU5.TGRW input capture/compare match + - description: MTU6.TGRA input capture/compare match + - description: MTU6.TGRB input capture/compare match + - description: MTU6.TGRC input capture/compare match + - description: MTU6.TGRD input capture/compare match + - description: MTU6.TCNT overflow + - description: MTU7.TGRA input capture/compare match + - description: MTU7.TGRB input capture/compare match + - description: MTU7.TGRC input capture/compare match + - description: MTU7.TGRD input capture/compare match + - description: MTU7.TCNT overflow/underflow + - description: MTU8.TGRA input capture/compare match + - description: MTU8.TGRB input capture/compare match + - description: MTU8.TGRC input capture/compare match + - description: MTU8.TGRD input capture/compare match + - description: MTU8.TCNT overflow + - description: MTU8.TCNT underflow + + interrupt-names: + items: + - const: tgia0 + - const: tgib0 + - const: tgic0 + - const: tgid0 + - const: tgiv0 + - const: tgie0 + - const: tgif0 + - const: tgia1 + - const: tgib1 + - const: tgiv1 + - const: tgiu1 + - const: tgia2 + - const: tgib2 + - const: tgiv2 + - const: tgiu2 + - const: tgia3 + - const: tgib3 + - const: tgic3 + - const: tgid3 + - const: tgiv3 + - const: tgia4 + - const: tgib4 + - const: tgic4 + - const: tgid4 + - const: tgiv4 + - const: tgiu5 + - const: tgiv5 + - const: tgiw5 + - const: tgia6 + - const: tgib6 + - const: tgic6 + - const: tgid6 + - const: tgiv6 + - const: tgia7 + - const: tgib7 + - const: tgic7 + - const: tgid7 + - const: tgiv7 + - const: tgia8 + - const: tgib8 + - const: tgic8 + - const: tgid8 + - const: tgiv8 + - const: tgiu8 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include + #include + + mtu3: timer@10001200 { + compatible = "renesas,r9a07g044-mtu3", "renesas,rz-mtu3"; + reg = <0x10001200 0xb00>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0", + "tgif0", + "tgia1", "tgib1", "tgiv1", "tgiu1", + "tgia2", "tgib2", "tgiv2", "tgiu2", + "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3", + "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6", + "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7", + "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8"; + clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; + #pwm-cells = <2>; + };