From: Tejun Heo Date: Mon, 3 Aug 2015 15:45:34 +0000 (-0400) Subject: Revert "libata: Implement support for sense data reporting" X-Git-Tag: v4.1.7~35 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0a72deb0923c023b3e84087a5ae2a94fd4daf43c;p=platform%2Fkernel%2Flinux-exynos.git Revert "libata: Implement support for sense data reporting" commit 84ded2f8e7dda336fc2fb3570726ceb3b3b3590f upstream. This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by later changes. Signed-off-by: Tejun Heo Cc: Hannes Reinecke Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 336eb23..fb2a2087 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata_device *dev, return 0; } -static void ata_dev_config_sense_reporting(struct ata_device *dev) -{ - unsigned int err_mask; - - if (!ata_id_has_sense_reporting(dev->id)) - return; - - if (ata_id_sense_reporting_enabled(dev->id)) - return; - - err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1); - if (err_mask) { - ata_dev_dbg(dev, - "failed to enable Sense Data Reporting, Emask 0x%x\n", - err_mask); - } -} - /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device *dev) dev->devslp_timing[i] = sata_setting[j]; } } - ata_dev_config_sense_reporting(dev); + dev->cdb_len = 16; } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index af08d32..16125be 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1630,70 +1630,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key) } /** - * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT - * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to - * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) - * @dfl_sense_key: default sense key to use - * - * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK - * SENSE. This function is EH helper. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * encoded sense data on success, 0 on failure or if sense data - * is not available. - */ -static u32 ata_eh_request_sense(struct ata_queued_cmd *qc, - struct scsi_cmnd *cmd) -{ - struct ata_device *dev = qc->dev; - struct ata_taskfile tf; - unsigned int err_mask; - - if (!cmd) - return 0; - - DPRINTK("ATA request sense\n"); - ata_dev_warn(dev, "request sense\n"); - if (!ata_id_sense_reporting_enabled(dev->id)) { - ata_dev_warn(qc->dev, "sense data reporting disabled\n"); - return 0; - } - ata_tf_init(dev, &tf); - - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; - tf.command = ATA_CMD_REQ_SENSE_DATA; - tf.protocol = ATA_PROT_NODATA; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); - /* - * ACS-4 states: - * The device may set the SENSE DATA AVAILABLE bit to one in the - * STATUS field and clear the ERROR bit to zero in the STATUS field - * to indicate that the command returned completion without an error - * and the sense data described in table 306 is available. - * - * IOW the 'ATA_SENSE' bit might not be set even though valid - * sense data is available. - * So check for both. - */ - if ((tf.command & ATA_SENSE) || - tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) { - ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal); - qc->flags |= ATA_QCFLAG_SENSE_VALID; - ata_dev_warn(dev, "sense data %02x/%02x/%02x\n", - tf.lbah, tf.lbam, tf.lbal); - } else { - ata_dev_warn(dev, "request sense failed stat %02x emask %x\n", - tf.command, err_mask); - } - return err_mask; -} - -/** * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE * @dev: device to perform REQUEST_SENSE to * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) @@ -1896,22 +1832,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, return ATA_EH_RESET; } - /* - * Sense data reporting does not work if the - * device fault bit is set. - */ - if ((stat & ATA_SENSE) && !(stat & ATA_DF) && - !(qc->flags & ATA_QCFLAG_SENSE_VALID)) { - if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { - tmp = ata_eh_request_sense(qc, qc->scsicmd); - if (tmp) - qc->err_mask |= tmp; - } else { - ata_dev_warn(qc->dev, "sense data available but port frozen\n"); - } - } - - /* Set by NCQ autosense or request sense above */ + /* Set by NCQ autosense */ if (qc->flags & ATA_QCFLAG_SENSE_VALID) return 0; @@ -2658,15 +2579,14 @@ static void ata_eh_link_report(struct ata_link *link) #ifdef CONFIG_ATA_VERBOSE_ERROR if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | - ATA_SENSE | ATA_ERR)) { + ATA_ERR)) { if (res->command & ATA_BUSY) ata_dev_err(qc->dev, "status: { Busy }\n"); else - ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n", + ata_dev_err(qc->dev, "status: { %s%s%s%s}\n", res->command & ATA_DRDY ? "DRDY " : "", res->command & ATA_DF ? "DF " : "", res->command & ATA_DRQ ? "DRQ " : "", - res->command & ATA_SENSE ? "SENSE " : "", res->command & ATA_ERR ? "ERR " : ""); } diff --git a/include/linux/ata.h b/include/linux/ata.h index 533dbb6..3395536 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -385,8 +385,6 @@ enum { SATA_SSP = 0x06, /* Software Settings Preservation */ SATA_DEVSLP = 0x09, /* Device Sleep */ - SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */ - /* feature values for SET_MAX */ ATA_SET_MAX_ADDR = 0x00, ATA_SET_MAX_PASSWD = 0x01, @@ -710,20 +708,6 @@ static inline bool ata_id_has_read_log_dma_ext(const u16 *id) return id[ATA_ID_COMMAND_SET_3] & (1 << 3); } -static inline bool ata_id_has_sense_reporting(const u16 *id) -{ - if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) - return false; - return id[ATA_ID_COMMAND_SET_3] & (1 << 6); -} - -static inline bool ata_id_sense_reporting_enabled(const u16 *id) -{ - if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) - return false; - return id[ATA_ID_COMMAND_SET_4] & (1 << 6); -} - /** * ata_id_major_version - get ATA level of drive * @id: Identify data