From: Ander Conselvan de Oliveira Date: Wed, 2 Nov 2016 06:44:56 +0000 (+0200) Subject: drm/i915/bxt: Don't set OCL2_LDOFUSE_PWR_DIS bit in phy init sequence X-Git-Tag: v4.14-rc1~674^2~37^2~951 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0a379e27db5164a7e49a3717b16a59469d944b5d;p=platform%2Fkernel%2Flinux-rpi.git drm/i915/bxt: Don't set OCL2_LDOFUSE_PWR_DIS bit in phy init sequence Hardware engineers confirmed that writing to it has no effect, as implied by the FIXME comment. v2: Also remove comment from bxt_ddi_phy_verify_state(). (Imre) Cc: Imre Deak Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Imre Deak Link: http://patchwork.freedesktop.org/patch/msgid/1478069096-11209-1-git-send-email-ander.conselvan.de.oliveira@intel.com --- diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c index 4a6164a2..7a8e82d 100644 --- a/drivers/gpu/drm/i915/intel_dpio_phy.c +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c @@ -365,22 +365,6 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv, I915_WRITE(BXT_PORT_CL2CM_DW6(phy), val); } - val = I915_READ(BXT_PORT_CL1CM_DW30(phy)); - val &= ~OCL2_LDOFUSE_PWR_DIS; - /* - * On PHY1 disable power on the second channel, since no port is - * connected there. On PHY0 both channels have a port, so leave it - * enabled. - * TODO: port C is only connected on BXT-P, so on BXT0/1 we should - * power down the second channel on PHY0 as well. - * - * FIXME: Clarify programming of the following, the register is - * read-only with bit 6 fixed at 0 at least in stepping A. - */ - if (!phy_info->dual_channel) - val |= OCL2_LDOFUSE_PWR_DIS; - I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val); - if (phy_info->rcomp_phy != -1) { uint32_t grc_code; /* @@ -508,11 +492,6 @@ bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN, "BXT_PORT_CL2CM_DW6(%d)", phy); - /* - * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS, - * at least on stepping A this bit is read-only and fixed at 0. - */ - if (phy_info->rcomp_phy != -1) { u32 grc_code = dev_priv->bxt_phy_grc;