From: Raju Rangoju Date: Thu, 20 Oct 2022 06:42:14 +0000 (+0530) Subject: amd-xgbe: fix the SFP compliance codes check for DAC cables X-Git-Tag: v6.1-rc5~107^2~12^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=09c5f6bf11ac98874339e55f4f5f79a9dbc9b375;p=platform%2Fkernel%2Flinux-starfive.git amd-xgbe: fix the SFP compliance codes check for DAC cables The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive) cables is NULL. However, some cables (the 5 meter and 7 meter Molex passive cables) have non-zero data at offset 6. Fix the logic by moving the passive cable check above the active checks, so as not to be improperly identified as an active cable. This will fix the issue for any passive cable that advertises 1000Base-CX in offset 6. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju Acked-by: Tom Lendacky Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c index 349ba0d..8c41ac5 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c @@ -1151,7 +1151,10 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata) } /* Determine the type of SFP */ - if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR) + if (phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE && + xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000)) + phy_data->sfp_base = XGBE_SFP_BASE_10000_CR; + else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR) phy_data->sfp_base = XGBE_SFP_BASE_10000_SR; else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_LR) phy_data->sfp_base = XGBE_SFP_BASE_10000_LR; @@ -1167,9 +1170,6 @@ static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata) phy_data->sfp_base = XGBE_SFP_BASE_1000_CX; else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_T) phy_data->sfp_base = XGBE_SFP_BASE_1000_T; - else if ((phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE) && - xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000)) - phy_data->sfp_base = XGBE_SFP_BASE_10000_CR; switch (phy_data->sfp_base) { case XGBE_SFP_BASE_1000_T: