From: Mark Einon Date: Wed, 3 Sep 2014 21:40:57 +0000 (+0100) Subject: staging: et131x: Fix whitespace - alignment matching open parenthesis X-Git-Tag: v4.14-rc1~6739^2~748 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=096e6224386bc81663f72ba2fe51ee74e3337d1a;p=platform%2Fkernel%2Flinux-rpi.git staging: et131x: Fix whitespace - alignment matching open parenthesis Fix occurrences in et131x.c of: CHECK: Alignment should match open parenthesis Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 1ac9e7e..2543ac0 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -594,11 +594,11 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) * byte addressing). */ if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, - LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE)) + LBCIF_CONTROL_LBCIF_ENABLE | + LBCIF_CONTROL_I2C_WRITE)) return -EIO; /* Prepare EEPROM address for Step 3 */ - for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) { /* Write the address to the LBCIF Address Register */ if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr)) @@ -654,7 +654,7 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) while (1) { if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, - LBCIF_CONTROL_LBCIF_ENABLE)) + LBCIF_CONTROL_LBCIF_ENABLE)) writeok = 0; /* Do read until internal ACK_ERROR goes away meaning write @@ -666,7 +666,8 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) addr); do { pci_read_config_dword(pdev, - LBCIF_DATA_REGISTER, &val); + LBCIF_DATA_REGISTER, + &val); } while ((val & 0x00010000) == 0); } while (val & 0x00040000); @@ -747,7 +748,7 @@ static int et131x_init_eeprom(struct et131x_adapter *adapter) */ if (pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus)) { dev_err(&pdev->dev, - "Could not read PCI config space for EEPROM Status\n"); + "Could not read PCI config space for EEPROM Status\n"); return -EIO; } @@ -771,7 +772,8 @@ static int et131x_init_eeprom(struct et131x_adapter *adapter) } if (pdev->revision != 0x01 || write_failed) { dev_err(&pdev->dev, - "Fatal EEPROM Status Error - 0x%04x\n", eestatus); + "Fatal EEPROM Status Error - 0x%04x\n", + eestatus); /* This error could mean that there was an error * reading the eeprom or that the eeprom doesn't exist. @@ -829,7 +831,7 @@ static void et131x_rx_dma_enable(struct et131x_adapter *adapter) csr = readl(&adapter->regs->rxdma.csr); if (csr & ET_RXDMA_CSR_HALT_STATUS) { dev_err(&adapter->pdev->dev, - "RX Dma failed to exit halt state. CSR 0x%08x\n", + "RX Dma failed to exit halt state. CSR 0x%08x\n", csr); } } @@ -850,8 +852,8 @@ static void et131x_rx_dma_disable(struct et131x_adapter *adapter) csr = readl(&adapter->regs->rxdma.csr); if (!(csr & ET_RXDMA_CSR_HALT_STATUS)) dev_err(&adapter->pdev->dev, - "RX Dma failed to enter halt state. CSR 0x%08x\n", - csr); + "RX Dma failed to enter halt state. CSR 0x%08x\n", + csr); } } @@ -865,8 +867,8 @@ static void et131x_tx_dma_enable(struct et131x_adapter *adapter) /* Setup the transmit dma configuration register for normal * operation */ - writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT), - &adapter->regs->txdma.csr); + writel(ET_TXDMA_SNGL_EPKT | (PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT), + &adapter->regs->txdma.csr); } static inline void add_10bit(u32 *v, int n) @@ -976,7 +978,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) /* Initialize loop back to off */ cfg1 &= ~(ET_MAC_CFG1_LOOPBACK | ET_MAC_CFG1_RX_FLOW); if (adapter->flowcontrol == FLOW_RXONLY || - adapter->flowcontrol == FLOW_BOTH) + adapter->flowcontrol == FLOW_BOTH) cfg1 |= ET_MAC_CFG1_RX_FLOW; writel(cfg1, &mac->cfg1); @@ -1010,8 +1012,8 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) if (delay == 100) { dev_warn(&adapter->pdev->dev, - "Syncd bits did not respond correctly cfg1 word 0x%08x\n", - cfg1); + "Syncd bits did not respond correctly cfg1 word 0x%08x\n", + cfg1); } /* Enable txmac */ @@ -1276,7 +1278,7 @@ static void et1310_config_macstat_regs(struct et131x_adapter *adapter) * @value: pointer to a 16-bit value in which the value will be stored */ static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, - u8 reg, u16 *value) + u8 reg, u16 *value) { struct mac_regs __iomem *mac = &adapter->regs->mac; int status = 0; @@ -1308,9 +1310,9 @@ static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, /* If we hit the max delay, we could not read the register */ if (delay == 50) { dev_warn(&adapter->pdev->dev, - "reg 0x%08x could not be read\n", reg); + "reg 0x%08x could not be read\n", reg); dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", - mii_indicator); + mii_indicator); status = -EIO; goto out; @@ -1385,11 +1387,11 @@ static int et131x_mii_write(struct et131x_adapter *adapter, u8 addr, u8 reg, u16 tmp; dev_warn(&adapter->pdev->dev, - "reg 0x%08x could not be written", reg); + "reg 0x%08x could not be written", reg); dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", - mii_indicator); + mii_indicator); dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", - readl(&mac->mii_mgmt_cmd)); + readl(&mac->mii_mgmt_cmd)); et131x_mii_read(adapter, reg, &tmp); @@ -1857,7 +1859,7 @@ static void et131x_tx_dma_disable(struct et131x_adapter *adapter) { /* Setup the transmit dma configuration register */ writel(ET_TXDMA_CSR_HALT | ET_TXDMA_SNGL_EPKT, - &adapter->regs->txdma.csr); + &adapter->regs->txdma.csr); } /* et131x_enable_txrx - Enable tx/rx queues */ @@ -2092,7 +2094,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) GFP_KERNEL); if (!fbr->ring_virtaddr) { dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Free Buffer Ring %d\n", id); + "Cannot alloc memory for Free Buffer Ring %d\n", + id); return -ENOMEM; } } @@ -2151,7 +2154,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) if (!rx_ring->ps_ring_virtaddr) { dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Packet Status Ring\n"); + "Cannot alloc memory for Packet Status Ring\n"); return -ENOMEM; } @@ -2168,7 +2171,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) GFP_KERNEL); if (!rx_ring->rx_status_block) { dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Status Block\n"); + "Cannot alloc memory for Status Block\n"); return -ENOMEM; } rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD; @@ -2242,8 +2245,8 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) rx_ring->psr_num_entries; dma_free_coherent(&adapter->pdev->dev, pktstat_ringsize, - rx_ring->ps_ring_virtaddr, - rx_ring->ps_ring_physaddr); + rx_ring->ps_ring_virtaddr, + rx_ring->ps_ring_physaddr); rx_ring->ps_ring_virtaddr = NULL; } @@ -2251,8 +2254,9 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) /* Free area of memory for the writeback of status information */ if (rx_ring->rx_status_block) { dma_free_coherent(&adapter->pdev->dev, - sizeof(struct rx_status_block), - rx_ring->rx_status_block, rx_ring->rx_status_bus); + sizeof(struct rx_status_block), + rx_ring->rx_status_block, + rx_ring->rx_status_bus); rx_ring->rx_status_block = NULL; } @@ -2345,7 +2349,7 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) writel(free_buff_ring, offset); } else { dev_err(&adapter->pdev->dev, - "%s illegal Buffer Index returned\n", __func__); + "%s illegal Buffer Index returned\n", __func__); } /* The processing on this RFD is done, so put it back on the tail of @@ -2738,19 +2742,19 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) } else { desc[frag].len_vlan = skb_headlen(skb) / 2; dma_addr = dma_map_single(&adapter->pdev->dev, - skb->data, - (skb_headlen(skb) / 2), - DMA_TO_DEVICE); + skb->data, + (skb_headlen(skb) / 2), + DMA_TO_DEVICE); desc[frag].addr_lo = lower_32_bits(dma_addr); desc[frag].addr_hi = upper_32_bits(dma_addr); frag++; desc[frag].len_vlan = skb_headlen(skb) / 2; dma_addr = dma_map_single(&adapter->pdev->dev, - skb->data + - (skb_headlen(skb) / 2), - (skb_headlen(skb) / 2), - DMA_TO_DEVICE); + skb->data + + (skb_headlen(skb) / 2), + (skb_headlen(skb) / 2), + DMA_TO_DEVICE); desc[frag].addr_lo = lower_32_bits(dma_addr); desc[frag].addr_hi = upper_32_bits(dma_addr); frag++; @@ -2804,7 +2808,7 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) add_10bit(&tx_ring->send_idx, thiscopy); if (INDEX10(tx_ring->send_idx) == 0 || - INDEX10(tx_ring->send_idx) == NUM_DESC_PER_RING_TX) { + INDEX10(tx_ring->send_idx) == NUM_DESC_PER_RING_TX) { tx_ring->send_idx &= ~ET_DMA10_MASK; tx_ring->send_idx ^= ET_DMA10_WRAP; } @@ -2947,7 +2951,7 @@ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) * netif layer think we're good and drop the packet */ if ((adapter->flags & FMP_ADAPTER_FAIL_SEND_MASK) || - !netif_carrier_ok(netdev)) { + !netif_carrier_ok(netdev)) { dev_kfree_skb_any(skb); skb = NULL; @@ -2975,7 +2979,7 @@ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) * Assumption - Send spinlock has been acquired */ static inline void free_send_packet(struct et131x_adapter *adapter, - struct tcb *tcb) + struct tcb *tcb) { unsigned long flags; struct tx_desc *desc = NULL; @@ -3358,7 +3362,7 @@ static void et131x_hwaddr_init(struct et131x_adapter *adapter) * address into the permanent address */ memcpy(adapter->rom_addr, - adapter->addr, ETH_ALEN); + adapter->addr, ETH_ALEN); } else { /* We do not have an override address, so set the * current address to the permanent address and add @@ -3399,15 +3403,15 @@ static int et131x_pci_init(struct et131x_adapter *adapter, static const u16 replay[2] = { 0x1E0, 0x2ED }; if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK, - acknak[max_payload])) { + acknak[max_payload])) { dev_err(&pdev->dev, - "Could not write PCI config space for ACK/NAK\n"); + "Could not write PCI config space for ACK/NAK\n"); goto err_out; } if (pci_write_config_word(pdev, ET1310_PCI_REPLAY, - replay[max_payload])) { + replay[max_payload])) { dev_err(&pdev->dev, - "Could not write PCI config space for Replay Timer\n"); + "Could not write PCI config space for Replay Timer\n"); goto err_out; } } @@ -3417,7 +3421,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter, */ if (pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11)) { dev_err(&pdev->dev, - "Could not write PCI config space for Latency Timers\n"); + "Could not write PCI config space for Latency Timers\n"); goto err_out; } @@ -3438,7 +3442,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter, for (i = 0; i < ETH_ALEN; i++) { if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i, - adapter->rom_addr + i)) { + adapter->rom_addr + i)) { dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n"); goto err_out; } @@ -3510,7 +3514,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) status = et131x_tx_dma_memory_alloc(adapter); if (status) { dev_err(&adapter->pdev->dev, - "et131x_tx_dma_memory_alloc FAILED\n"); + "et131x_tx_dma_memory_alloc FAILED\n"); et131x_tx_dma_memory_free(adapter); return status; } @@ -3518,7 +3522,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) status = et131x_rx_dma_memory_alloc(adapter); if (status) { dev_err(&adapter->pdev->dev, - "et131x_rx_dma_memory_alloc FAILED\n"); + "et131x_rx_dma_memory_alloc FAILED\n"); et131x_adapter_memory_free(adapter); return status; } @@ -3558,7 +3562,7 @@ static void et131x_adjust_link(struct net_device *netdev) u16 register18; et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, - ®ister18); + ®ister18); et131x_mii_write(adapter, phydev->addr, PHY_MPHY_CONTROL_REG, register18 | 0x4); et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG, @@ -3591,15 +3595,15 @@ static void et131x_adjust_link(struct net_device *netdev) u16 register18; et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, - ®ister18); + ®ister18); et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, register18 | 0x4); + PHY_MPHY_CONTROL_REG, register18 | 0x4); et131x_mii_write(adapter, phydev->addr, - PHY_INDEX_REG, register18 | 0x8402); + PHY_INDEX_REG, register18 | 0x8402); et131x_mii_write(adapter, phydev->addr, - PHY_DATA_REG, register18 | 511); + PHY_DATA_REG, register18 | 511); et131x_mii_write(adapter, phydev->addr, - PHY_MPHY_CONTROL_REG, register18); + PHY_MPHY_CONTROL_REG, register18); } /* Free the packets being actively sent & stopped */ @@ -3861,8 +3865,8 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) u32 txdma_err = readl(&iomem->txdma.tx_dma_error); dev_warn(&adapter->pdev->dev, - "TXDMA_ERR interrupt, error = %d\n", - txdma_err); + "TXDMA_ERR interrupt, error = %d\n", + txdma_err); } /* Handle Free Buffer Ring 0 and 1 Low interrupt */ @@ -3925,8 +3929,8 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) /* TRAP();*/ dev_warn(&adapter->pdev->dev, - "RxDMA_ERR interrupt, error %x\n", - readl(&iomem->txmac.tx_test)); + "RxDMA_ERR interrupt, error %x\n", + readl(&iomem->txmac.tx_test)); } /* Handle the Wake on LAN Event */ @@ -4319,9 +4323,9 @@ static void et131x_tx_timeout(struct net_device *netdev) flags); dev_warn(&adapter->pdev->dev, - "Send stuck - reset. tcb->WrIndex %x, flags 0x%08x\n", - tcb->index, - tcb->flags); + "Send stuck - reset. tcb->WrIndex %x, flags 0x%08x\n", + tcb->index, + tcb->flags); adapter->netdev->stats.tx_errors++; @@ -4361,7 +4365,7 @@ static int et131x_change_mtu(struct net_device *netdev, int new_mtu) result = et131x_adapter_memory_alloc(adapter); if (result != 0) { dev_warn(&adapter->pdev->dev, - "Change MTU failed; couldn't re-alloc DMA memory\n"); + "Change MTU failed; couldn't re-alloc DMA memory\n"); return result; } @@ -4500,7 +4504,7 @@ static int et131x_pci_setup(struct pci_dev *pdev, adapter->mii_bus->name = "et131x_eth_mii"; snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x", - (adapter->pdev->bus->number << 8) | adapter->pdev->devfn); + (adapter->pdev->bus->number << 8) | adapter->pdev->devfn); adapter->mii_bus->priv = netdev; adapter->mii_bus->read = et131x_mdio_read; adapter->mii_bus->write = et131x_mdio_write;