From: Uri Mashiach Date: Wed, 30 Dec 2015 13:35:32 +0000 (+0200) Subject: wlcore/wl12xx: spi: add device tree support X-Git-Tag: v4.14-rc1~3609^2~260^2~49 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=04654c386145239c8bcb35878b0b0537ce916766;p=platform%2Fkernel%2Flinux-rpi.git wlcore/wl12xx: spi: add device tree support Add DT support for the wl1271 SPI WiFi. Add documentation file for the wl1271 SPI WiFi. Signed-off-by: Uri Mashiach Acked-by: Rob Herring Tested-By: Sebastian Reichel Reviewed-by: Grygorii Strashko Acked-by: Igor Grinberg Signed-off-by: Kalle Valo --- diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt new file mode 100644 index 0000000..9180724 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt @@ -0,0 +1,36 @@ +* Texas Instruments wl1271 wireless lan controller + +The wl1271 chip can be connected via SPI or via SDIO. This +document describes the binding for the SPI connected chip. + +Required properties: +- compatible : Should be "ti,wl1271" +- reg : Chip select address of device +- spi-max-frequency : Maximum SPI clocking speed of device in Hz +- ref-clock-frequency : Reference clock frequency +- interrupt-parent, interrupts : + Should contain parameters for 1 interrupt line. + Interrupt parameters: parent, line number, type. +- vwlan-supply : Point the node of the regulator that powers/enable the wl1271 chip + +Optional properties: +- clock-xtal : boolean, clock is generated from XTAL + +- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt + for optional SPI connection related properties, + +Examples: + +&spi1 { + wl1271@1 { + compatible = "ti,wl1271"; + + reg = <1>; + spi-max-frequency = <48000000>; + clock-xtal; + ref-clock-frequency = <38400000>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + vwlan-supply = <&vwlan_fixed>; + }; +}; diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index 969c9d7..8a8f1e7 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -13,7 +13,7 @@ config WLCORE config WLCORE_SPI tristate "TI wlcore SPI support" - depends on WLCORE && SPI_MASTER + depends on WLCORE && SPI_MASTER && OF select CRC7 ---help--- This module adds support for the SPI interface of adapters using diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index dec1512..020ac1a 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "wlcore.h" @@ -357,6 +358,39 @@ static struct wl1271_if_operations spi_ops = { .set_block_size = NULL, }; +static const struct of_device_id wlcore_spi_of_match_table[] = { + { .compatible = "ti,wl1271" }, + { } +}; +MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table); + +/** + * wlcore_probe_of - DT node parsing. + * @spi: SPI slave device parameters. + * @res: resource parameters. + * @glue: wl12xx SPI bus to slave device glue parameters. + * @pdev_data: wlcore device parameters + */ +static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue, + struct wlcore_platdev_data *pdev_data) +{ + struct device_node *dt_node = spi->dev.of_node; + int ret; + + if (of_find_property(dt_node, "clock-xtal", NULL)) + pdev_data->ref_clock_xtal = true; + + ret = of_property_read_u32(dt_node, "ref-clock-frequency", + &pdev_data->ref_clock_freq); + if (IS_ERR_VALUE(ret)) { + dev_err(glue->dev, + "can't get reference clock frequency (%d)\n", ret); + return ret; + } + + return 0; +} + static int wl1271_probe(struct spi_device *spi) { struct wl12xx_spi_glue *glue; @@ -366,8 +400,6 @@ static int wl1271_probe(struct spi_device *spi) memset(&pdev_data, 0x00, sizeof(pdev_data)); - /* TODO: add DT parsing when needed */ - pdev_data.if_ops = &spi_ops; glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL); @@ -392,6 +424,13 @@ static int wl1271_probe(struct spi_device *spi) return PTR_ERR(glue->reg); } + ret = wlcore_probe_of(spi, glue, &pdev_data); + if (IS_ERR_VALUE(ret)) { + dev_err(glue->dev, + "can't get device tree parameters (%d)\n", ret); + return ret; + } + ret = spi_setup(spi); if (ret < 0) { dev_err(glue->dev, "spi_setup failed\n"); @@ -409,7 +448,7 @@ static int wl1271_probe(struct spi_device *spi) memset(res, 0x00, sizeof(res)); res[0].start = spi->irq; - res[0].flags = IORESOURCE_IRQ; + res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq); res[0].name = "irq"; ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); @@ -447,10 +486,10 @@ static int wl1271_remove(struct spi_device *spi) return 0; } - static struct spi_driver wl1271_spi_driver = { .driver = { .name = "wl1271_spi", + .of_match_table = of_match_ptr(wlcore_spi_of_match_table), }, .probe = wl1271_probe,