From: Chao Xie Date: Fri, 14 Jun 2013 05:21:51 +0000 (-0400) Subject: mfd: 88pm80x: Change chip id definition and detection X-Git-Tag: v3.11-rc1~53^2~29 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=03dcc544bff9ff36b9ac5e2b992a7a4890e6edc4;p=profile%2Fivi%2Fkernel-x86-ivi.git mfd: 88pm80x: Change chip id definition and detection Change the chip id definition and detection and then: 1. We no longer need to add PM800_CHIP_XXX for the coming revision. 2. We no longer need to pass driver_data in i2c_device_id as we can distinguish the chips from the CHIP_ID register. Signed-off-by: Chao Xie Signed-off-by: Samuel Ortiz --- diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index 4ebb2e2..2c0b415 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -28,8 +28,6 @@ #include #include -#define PM800_CHIP_ID (0x00) - /* Interrupt Registers */ #define PM800_INT_STATUS1 (0x05) #define PM800_ONKEY_INT_STS1 (1 << 0) @@ -114,20 +112,11 @@ enum { PM800_MAX_IRQ, }; -enum { - /* Procida */ - PM800_CHIP_A0 = 0x60, - PM800_CHIP_A1 = 0x61, - PM800_CHIP_B0 = 0x62, - PM800_CHIP_C0 = 0x63, - PM800_CHIP_END = PM800_CHIP_C0, - - /* Make sure to update this to the last stepping */ - PM8XXX_CHIP_END = PM800_CHIP_END -}; +/* PM800: generation identification number */ +#define PM800_CHIP_GEN_ID_NUM 0x3 static const struct i2c_device_id pm80x_id_table[] = { - {"88PM800", CHIP_PM800}, + {"88PM800", 0}, {} /* NULL terminated */ }; MODULE_DEVICE_TABLE(i2c, pm80x_id_table); @@ -434,28 +423,9 @@ static void pm800_pages_exit(struct pm80x_chip *chip) static int device_800_init(struct pm80x_chip *chip, struct pm80x_platform_data *pdata) { - int ret, pmic_id; + int ret; unsigned int val; - ret = regmap_read(chip->regmap, PM800_CHIP_ID, &val); - if (ret < 0) { - dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret); - goto out; - } - - pmic_id = val & PM80X_VERSION_MASK; - - if ((pmic_id >= PM800_CHIP_A0) && (pmic_id <= PM800_CHIP_END)) { - chip->version = val; - dev_info(chip->dev, - "88PM80x:Marvell 88PM800 (ID:0x%x) detected\n", val); - } else { - dev_err(chip->dev, - "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", val); - ret = -EINVAL; - goto out; - } - /* * alarm wake up bit will be clear in device_irq_init(), * read before that @@ -523,7 +493,7 @@ static int pm800_probe(struct i2c_client *client, struct pm80x_platform_data *pdata = client->dev.platform_data; struct pm80x_subchip *subchip; - ret = pm80x_init(client, id); + ret = pm80x_init(client); if (ret) { dev_err(&client->dev, "pm800_init fail\n"); goto out_init; @@ -553,7 +523,7 @@ static int pm800_probe(struct i2c_client *client, ret = device_800_init(chip, pdata); if (ret) { - dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id); + dev_err(chip->dev, "Failed to initialize 88pm800 devices\n"); goto err_device_init; } diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c index 0e82c2a..5216022 100644 --- a/drivers/mfd/88pm805.c +++ b/drivers/mfd/88pm805.c @@ -29,10 +29,8 @@ #include #include -#define PM805_CHIP_ID (0x00) - static const struct i2c_device_id pm80x_id_table[] = { - {"88PM805", CHIP_PM805}, + {"88PM805", 0}, {} /* NULL terminated */ }; MODULE_DEVICE_TABLE(i2c, pm80x_id_table); @@ -192,7 +190,6 @@ static struct regmap_irq_chip pm805_irq_chip = { static int device_805_init(struct pm80x_chip *chip) { int ret = 0; - unsigned int val; struct regmap *map = chip->regmap; if (!map) { @@ -200,13 +197,6 @@ static int device_805_init(struct pm80x_chip *chip) return -EINVAL; } - ret = regmap_read(map, PM805_CHIP_ID, &val); - if (ret < 0) { - dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret); - goto out_irq_init; - } - chip->version = val; - chip->regmap_irq_chip = &pm805_irq_chip; ret = device_irq_init_805(chip); @@ -239,7 +229,7 @@ static int pm805_probe(struct i2c_client *client, struct pm80x_chip *chip; struct pm80x_platform_data *pdata = client->dev.platform_data; - ret = pm80x_init(client, id); + ret = pm80x_init(client); if (ret) { dev_err(&client->dev, "pm805_init fail!\n"); goto out_init; @@ -249,7 +239,7 @@ static int pm805_probe(struct i2c_client *client, ret = device_805_init(chip); if (ret) { - dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id); + dev_err(chip->dev, "Failed to initialize 88pm805 devices\n"); goto err_805_init; } diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c index f736a46..5e72f65 100644 --- a/drivers/mfd/88pm80x.c +++ b/drivers/mfd/88pm80x.c @@ -18,6 +18,23 @@ #include #include +/* 88pm80x chips have same definition for chip id register. */ +#define PM80X_CHIP_ID (0x00) +#define PM80X_CHIP_ID_NUM(x) (((x) >> 5) & 0x7) +#define PM80X_CHIP_ID_REVISION(x) ((x) & 0x1F) + +struct pm80x_chip_mapping { + unsigned int id; + int type; +}; + +static struct pm80x_chip_mapping chip_mapping[] = { + /* 88PM800 chip id number */ + {0x3, CHIP_PM800}, + /* 88PM805 chip id number */ + {0x0, CHIP_PM805}, +}; + /* * workaround: some registers needed by pm805 are defined in pm800, so * need to use this global variable to maintain the relation between @@ -31,12 +48,13 @@ const struct regmap_config pm80x_regmap_config = { }; EXPORT_SYMBOL_GPL(pm80x_regmap_config); -int pm80x_init(struct i2c_client *client, - const struct i2c_device_id *id) + +int pm80x_init(struct i2c_client *client) { struct pm80x_chip *chip; struct regmap *map; - int ret = 0; + unsigned int val; + int i, ret = 0; chip = devm_kzalloc(&client->dev, sizeof(struct pm80x_chip), GFP_KERNEL); @@ -51,10 +69,6 @@ int pm80x_init(struct i2c_client *client, return ret; } - chip->id = id->driver_data; - if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) - return -EINVAL; - chip->client = client; chip->regmap = map; @@ -64,6 +78,25 @@ int pm80x_init(struct i2c_client *client, dev_set_drvdata(chip->dev, chip); i2c_set_clientdata(chip->client, chip); + ret = regmap_read(chip->regmap, PM80X_CHIP_ID, &val); + if (ret < 0) { + dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(chip_mapping); i++) { + if (chip_mapping[i].id == PM80X_CHIP_ID_NUM(val)) { + chip->type = chip_mapping[i].type; + break; + } + } + + if (i == ARRAY_SIZE(chip_mapping)) { + dev_err(chip->dev, + "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", val); + return -EINVAL; + } + device_init_wakeup(&client->dev, 1); /* diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 023e639..4a66a56 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -17,7 +17,6 @@ #include #include -#define PM80X_VERSION_MASK (0xFF) /* 80X chip ID mask */ enum { CHIP_INVALID = 0, CHIP_PM800, @@ -299,8 +298,7 @@ struct pm80x_chip { struct regmap *regmap; struct regmap_irq_chip *regmap_irq_chip; struct regmap_irq_chip_data *irq_data; - unsigned char version; - int id; + int type; int irq; int irq_mode; unsigned long wu_flag; @@ -361,7 +359,6 @@ static inline int pm80x_dev_resume(struct device *dev) } #endif -extern int pm80x_init(struct i2c_client *client, - const struct i2c_device_id *id); +extern int pm80x_init(struct i2c_client *client); extern int pm80x_deinit(void); #endif /* __LINUX_MFD_88PM80X_H */