From: Roger Quadros Date: Tue, 9 Apr 2013 08:39:18 +0000 (+0300) Subject: mfd: omap-usb-host: Add device tree support and binding information X-Git-Tag: v3.10-rc1~86^2~33 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=03a8f438f55c7abaaa1ddf5422a6c4abd1bdc1f6;p=profile%2Fivi%2Fkernel-x86-ivi.git mfd: omap-usb-host: Add device tree support and binding information Allows the OMAP HS USB host controller to be specified via device tree. Signed-off-by: Roger Quadros Reviewed-by: Mark Rutland Signed-off-by: Samuel Ortiz --- diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt new file mode 100644 index 0000000..b381fa6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt @@ -0,0 +1,80 @@ +OMAP HS USB Host + +Required properties: + +- compatible: should be "ti,usbhs-host" +- reg: should contain one register range i.e. start and length +- ti,hwmods: must contain "usb_host_hs" + +Optional properties: + +- num-ports: number of USB ports. Usually this is automatically detected + from the IP's revision register but can be overridden by specifying + this property. A maximum of 3 ports are supported at the moment. + +- portN-mode: String specifying the port mode for port N, where N can be + from 1 to 3. If the port mode is not specified, that port is treated + as unused. When specified, it must be one of the following. + "ehci-phy", + "ehci-tll", + "ehci-hsic", + "ohci-phy-6pin-datse0", + "ohci-phy-6pin-dpdm", + "ohci-phy-3pin-datse0", + "ohci-phy-4pin-dpdm", + "ohci-tll-6pin-datse0", + "ohci-tll-6pin-dpdm", + "ohci-tll-3pin-datse0", + "ohci-tll-4pin-dpdm", + "ohci-tll-2pin-datse0", + "ohci-tll-2pin-dpdm", + +- single-ulpi-bypass: Must be present if the controller contains a single + ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1 + +Required properties if child node exists: + +- #address-cells: Must be 1 +- #size-cells: Must be 1 +- ranges: must be present + +Properties for children: + +The OMAP HS USB Host subsystem contains EHCI and OHCI controllers. +See Documentation/devicetree/bindings/usb/omap-ehci.txt and +omap3-ohci.txt + +Example for OMAP4: + +usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 76 0x4>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 77 0x4>; + }; +}; + +&usbhshost { + port1-mode = "ehci-phy"; + port2-mode = "ehci-tll"; + port3-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy 0 &hsusb3_phy>; +}; diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 138ee98..d3b6e94 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -1,8 +1,9 @@ /** * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com * Author: Keshava Munegowda + * Author: Roger Quadros * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 of @@ -27,6 +28,8 @@ #include #include #include +#include +#include #include "omap-usb.h" @@ -137,6 +140,49 @@ static inline u8 usbhs_readb(void __iomem *base, u8 reg) /*-------------------------------------------------------------------------*/ +/** + * Map 'enum usbhs_omap_port_mode' found in + * to the device tree binding portN-mode found in + * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt' + */ +static const char * const port_modes[] = { + [OMAP_USBHS_PORT_MODE_UNUSED] = "", + [OMAP_EHCI_PORT_MODE_PHY] = "ehci-phy", + [OMAP_EHCI_PORT_MODE_TLL] = "ehci-tll", + [OMAP_EHCI_PORT_MODE_HSIC] = "ehci-hsic", + [OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0] = "ohci-phy-6pin-datse0", + [OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM] = "ohci-phy-6pin-dpdm", + [OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0] = "ohci-phy-3pin-datse0", + [OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM] = "ohci-phy-4pin-dpdm", + [OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0] = "ohci-tll-6pin-datse0", + [OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM] = "ohci-tll-6pin-dpdm", + [OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0] = "ohci-tll-3pin-datse0", + [OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM] = "ohci-tll-4pin-dpdm", + [OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0] = "ohci-tll-2pin-datse0", + [OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM] = "ohci-tll-2pin-dpdm", +}; + +/** + * omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode' + * from the port mode string. + * @mode: The port mode string, usually obtained from device tree. + * + * The function returns the 'enum usbhs_omap_port_mode' that matches the + * provided port mode string as per the port_modes table. + * If no match is found it returns -ENODEV + */ +static const int omap_usbhs_get_dt_port_mode(const char *mode) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port_modes); i++) { + if (!strcmp(mode, port_modes[i])) + return i; + } + + return -ENODEV; +} + static struct platform_device *omap_usbhs_alloc_child(const char *name, struct resource *res, int num_resources, void *pdata, size_t pdata_size, struct device *dev) @@ -464,6 +510,58 @@ static void omap_usbhs_init(struct device *dev) pm_runtime_put_sync(dev); } +static int usbhs_omap_get_dt_pdata(struct device *dev, + struct usbhs_omap_platform_data *pdata) +{ + int ret, i; + struct device_node *node = dev->of_node; + + ret = of_property_read_u32(node, "num-ports", &pdata->nports); + if (ret) + pdata->nports = 0; + + if (pdata->nports > OMAP3_HS_USB_PORTS) { + dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n", + pdata->nports, OMAP3_HS_USB_PORTS); + return -ENODEV; + } + + /* get port modes */ + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { + char prop[11]; + const char *mode; + + pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED; + + snprintf(prop, sizeof(prop), "port%d-mode", i + 1); + ret = of_property_read_string(node, prop, &mode); + if (ret < 0) + continue; + + ret = omap_usbhs_get_dt_port_mode(mode); + if (ret < 0) { + dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n", + i, mode); + return -ENODEV; + } + + dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret); + pdata->port_mode[i] = ret; + } + + /* get flags */ + pdata->single_ulpi_bypass = of_property_read_bool(node, + "single-ulpi-bypass"); + + return 0; +} + +static struct of_device_id usbhs_child_match_table[] = { + { .compatible = "ti,omap-ehci", }, + { .compatible = "ti,omap-ohci", }, + { } +}; + /** * usbhs_omap_probe - initialize TI-based HCDs * @@ -479,18 +577,37 @@ static int usbhs_omap_probe(struct platform_device *pdev) int i; bool need_logic_fck; + if (dev->of_node) { + /* For DT boot we populate platform data from OF node */ + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + ret = usbhs_omap_get_dt_pdata(dev, pdata); + if (ret) + return ret; + + dev->platform_data = pdata; + } + if (!pdata) { dev_err(dev, "Missing platform data\n"); return -ENODEV; } + if (pdata->nports > OMAP3_HS_USB_PORTS) { + dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n", + pdata->nports, OMAP3_HS_USB_PORTS); + return -ENODEV; + } + omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); if (!omap) { dev_err(dev, "Memory allocation failed\n"); return -ENOMEM; } - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); omap->uhh_base = devm_request_and_ioremap(dev, res); if (!omap->uhh_base) { dev_err(dev, "Resource request/ioremap failed\n"); @@ -661,10 +778,23 @@ static int usbhs_omap_probe(struct platform_device *pdev) } omap_usbhs_init(dev); - ret = omap_usbhs_alloc_children(pdev); - if (ret) { - dev_err(dev, "omap_usbhs_alloc_children failed\n"); - goto err_alloc; + + if (dev->of_node) { + ret = of_platform_populate(dev->of_node, + usbhs_child_match_table, NULL, dev); + + if (ret) { + dev_err(dev, "Failed to create DT children: %d\n", ret); + goto err_alloc; + } + + } else { + ret = omap_usbhs_alloc_children(pdev); + if (ret) { + dev_err(dev, "omap_usbhs_alloc_children failed: %d\n", + ret); + goto err_alloc; + } } return 0; @@ -703,6 +833,13 @@ err_mem: return ret; } +static int usbhs_omap_remove_child(struct device *dev, void *data) +{ + dev_info(dev, "unregistering\n"); + platform_device_unregister(to_platform_device(dev)); + return 0; +} + /** * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs * @pdev: USB Host Controller being removed @@ -734,6 +871,8 @@ static int usbhs_omap_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); + /* remove children */ + device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child); return 0; } @@ -742,16 +881,26 @@ static const struct dev_pm_ops usbhsomap_dev_pm_ops = { .runtime_resume = usbhs_runtime_resume, }; +static const struct of_device_id usbhs_omap_dt_ids[] = { + { .compatible = "ti,usbhs-host" }, + { } +}; + +MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids); + + static struct platform_driver usbhs_omap_driver = { .driver = { .name = (char *)usbhs_driver_name, .owner = THIS_MODULE, .pm = &usbhsomap_dev_pm_ops, + .of_match_table = of_match_ptr(usbhs_omap_dt_ids), }, .remove = usbhs_omap_remove, }; MODULE_AUTHOR("Keshava Munegowda "); +MODULE_AUTHOR("Roger Quadros "); MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");