From: Zhengchao Shao <shaozhengchao@huawei.com>
Date: Wed, 9 Nov 2022 02:37:41 +0000 (+0800)
Subject: ethernet: s2io: disable napi when start nic failed in s2io_card_up()
X-Git-Tag: v6.1-rc5~24^2~7
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0348c1ab980c1d43fb37b758d4b760990c066cb5;p=platform%2Fkernel%2Flinux-starfive.git

ethernet: s2io: disable napi when start nic failed in s2io_card_up()

When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.

Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index dcf8212..1d3c447 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -7128,9 +7128,8 @@ static int s2io_card_up(struct s2io_nic *sp)
 		if (ret) {
 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
 				  dev->name);
-			s2io_reset(sp);
-			free_rx_buffers(sp);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_fill_buff;
 		}
 		DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
 			  ring->rx_bufs_left);
@@ -7168,18 +7167,16 @@ static int s2io_card_up(struct s2io_nic *sp)
 	/* Enable Rx Traffic and interrupts on the NIC */
 	if (start_nic(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
-		s2io_reset(sp);
-		free_rx_buffers(sp);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_out;
 	}
 
 	/* Add interrupt service routine */
 	if (s2io_add_isr(sp) != 0) {
 		if (sp->config.intr_type == MSI_X)
 			s2io_rem_isr(sp);
-		s2io_reset(sp);
-		free_rx_buffers(sp);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_out;
 	}
 
 	timer_setup(&sp->alarm_timer, s2io_alarm_handle, 0);
@@ -7199,6 +7196,20 @@ static int s2io_card_up(struct s2io_nic *sp)
 	}
 
 	return 0;
+
+err_out:
+	if (config->napi) {
+		if (config->intr_type == MSI_X) {
+			for (i = 0; i < sp->config.rx_ring_num; i++)
+				napi_disable(&sp->mac_control.rings[i].napi);
+		} else {
+			napi_disable(&sp->napi);
+		}
+	}
+err_fill_buff:
+	s2io_reset(sp);
+	free_rx_buffers(sp);
+	return ret;
 }
 
 /**