From: Felipe Balbi Date: Fri, 29 May 2015 15:06:38 +0000 (-0500) Subject: usb: dwc3: gadget: don't clear EP_BUSY too early X-Git-Tag: v4.1.4~175 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0343379cabd1736cce291f4555d239a66813f987;p=platform%2Fkernel%2Flinux-exynos.git usb: dwc3: gadget: don't clear EP_BUSY too early commit e18b7975c885bc3a938b9a76daf32957ea0235fa upstream. In case of non-Isochronous transfers, we don't want to clear DWC3_EP_BUSY flag until XferComplete event. That's because XferInProgress was only enabled so we can recycle TRBs and usb_requests quicker, but there are still other pending requests being transferred. In order to make sure we don't allow for another StartTransfer command while the HW is still processing other transfers, we must keep DWC3_EP_BUSY flag set and this what this patch does. Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) Reported-by: sundeep subbaraya Tested-by: sundeep subbaraya Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 55b5edc..333a7c0 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1906,12 +1906,16 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, { unsigned status = 0; int clean_busy; + u32 is_xfer_complete; + + is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE); if (event->status & DEPEVT_STATUS_BUSERR) status = -ECONNRESET; clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); - if (clean_busy) + if (clean_busy && (is_xfer_complete || + usb_endpoint_xfer_isoc(dep->endpoint.desc))) dep->flags &= ~DWC3_EP_BUSY; /*