From: Stephan Gerhold <stephan@gerhold.net>
Date: Sat, 7 Jan 2023 11:09:57 +0000 (+0100)
Subject: arm64: dts: qcom: msm8916: Enable blsp_dma by default
X-Git-Tag: v6.6.17~5549^2~45^2~113
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0154d3594af3c198532ac7b4ab70f50fb5207a15;p=platform%2Fkernel%2Flinux-rpi.git

arm64: dts: qcom: msm8916: Enable blsp_dma by default

Adding the "dmas" to the I2C controllers prevents probing them if
blsp_dma is disabled (infinite probe deferral). Avoid this by enabling
blsp_dma by default - it's an integral part of the SoC that is almost
always used (even if just for UART).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107110958.5762-2-stephan@gerhold.net
---

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index ef5b39b..c52d79a 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -169,10 +169,6 @@
 	};
 };
 
-&blsp_dma {
-	status = "okay";
-};
-
 &blsp_i2c2 {
 	/* On Low speed expansion */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7458387..6dbf5d6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1522,7 +1522,6 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
-			status = "disabled";
 		};
 
 		blsp1_uart1: serial@78af000 {