From: Bill Pemberton Date: Fri, 27 Mar 2009 15:29:56 +0000 (-0400) Subject: Staging: comedi: remove C99 comments in APCI1710_Pwm.c X-Git-Tag: upstream/snapshot3+hdmi~18383^2~303 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0110c4432aab7f119d38d1389964e51685721ed4;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git Staging: comedi: remove C99 comments in APCI1710_Pwm.c Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c index 2ebb121..976fe58 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c @@ -79,29 +79,29 @@ int i_APCI1710_InsnConfigPWM(struct comedi_device * dev, struct comedi_subdevice switch (b_ConfigType) { case APCI1710_PWM_INIT: - i_ReturnValue = i_APCI1710_InitPWM(dev, (unsigned char) CR_AREF(insn->chanspec), // b_ModulNbr - (unsigned char) data[0], //b_PWM - (unsigned char) data[1], // b_ClockSelection - (unsigned char) data[2], // b_TimingUnit - (unsigned int) data[3], //ul_LowTiming - (unsigned int) data[4], //ul_HighTiming - (unsigned int *) & data[0], //pul_RealLowTiming - (unsigned int *) & data[1] //pul_RealHighTiming + i_ReturnValue = i_APCI1710_InitPWM(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */ + (unsigned char) data[0], /* b_PWM */ + (unsigned char) data[1], /* b_ClockSelection */ + (unsigned char) data[2], /* b_TimingUnit */ + (unsigned int) data[3], /* ul_LowTiming */ + (unsigned int) data[4], /* ul_HighTiming */ + (unsigned int *) & data[0], /* pul_RealLowTiming */ + (unsigned int *) & data[1] /* pul_RealHighTiming */ ); break; case APCI1710_PWM_GETINITDATA: - i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (unsigned char) CR_AREF(insn->chanspec), // b_ModulNbr - (unsigned char) data[0], //b_PWM - (unsigned char *) & data[0], //pb_TimingUnit - (unsigned int *) & data[1], //pul_LowTiming - (unsigned int *) & data[2], //pul_HighTiming - (unsigned char *) & data[3], // pb_StartLevel - (unsigned char *) & data[4], // pb_StopMode - (unsigned char *) & data[5], // pb_StopLevel - (unsigned char *) & data[6], // pb_ExternGate - (unsigned char *) & data[7], // pb_InterruptEnable - (unsigned char *) & data[8] // pb_Enable + i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (unsigned char) CR_AREF(insn->chanspec), /* b_ModulNbr */ + (unsigned char) data[0], /* b_PWM */ + (unsigned char *) & data[0], /* pb_TimingUnit */ + (unsigned int *) & data[1], /* pul_LowTiming */ + (unsigned int *) & data[2], /* pul_HighTiming */ + (unsigned char *) & data[3], /* pb_StartLevel */ + (unsigned char *) & data[4], /* pb_StopMode */ + (unsigned char *) & data[5], /* pb_StopLevel */ + (unsigned char *) & data[6], /* pb_ExternGate */ + (unsigned char *) & data[7], /* pb_InterruptEnable */ + (unsigned char *) & data[8] /* pb_Enable */ ); break; @@ -200,33 +200,33 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, /**************************/ if (b_ModulNbr < 4) { - /***************/ + /***************/ /* Test if PWM */ - /***************/ + /***************/ if ((devpriv->s_BoardInfos. dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_PWM) { - /**************************/ + /**************************/ /* Test the PWM selection */ - /**************************/ + /**************************/ if (b_PWM <= 1) { - /******************/ + /******************/ /* Test the clock */ - /******************/ + /******************/ if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) { - /************************/ + /************************/ /* Test the timing unit */ - /************************/ + /************************/ if (b_TimingUnit <= 4) { - /*********************************/ + /*********************************/ /* Test the low timing selection */ - /*********************************/ + /*********************************/ if (((b_ClockSelection == APCI1710_30MHZ) @@ -361,34 +361,34 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, && (ul_LowTiming <= 7UL))) { - /**********************************/ + /**********************************/ /* Test the High timing selection */ - /**********************************/ + /**********************************/ if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) { - /**************************/ + /**************************/ /* Test the board version */ - /**************************/ + /**************************/ if (((b_ClockSelection == APCI1710_40MHZ) && (devpriv->s_BoardInfos.b_BoardVersion > 0)) || (b_ClockSelection != APCI1710_40MHZ)) { - /************************************/ + /************************************/ /* Calculate the low division fator */ - /************************************/ + /************************************/ fpu_begin (); switch (b_TimingUnit) { - /******/ + /******/ /* ns */ - /******/ + /******/ case 0: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -397,9 +397,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * (0.00025 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -409,9 +409,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealLowTiming = @@ -461,15 +461,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /******/ + /******/ /* æs */ - /******/ + /******/ case 1: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -478,9 +478,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * (0.25 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -490,9 +490,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealLowTiming = @@ -544,15 +544,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /******/ + /******/ /* ms */ - /******/ + /******/ case 2: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -562,9 +562,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * b_ClockSelection); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -574,9 +574,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealLowTiming = @@ -626,14 +626,14 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /*****/ + /*****/ /* s */ - /*****/ + /*****/ case 3: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -644,9 +644,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -656,9 +656,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealLowTiming = @@ -711,15 +711,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /******/ + /******/ /* mn */ - /******/ + /******/ case 4: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -733,9 +733,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -745,9 +745,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealLowTiming = @@ -806,20 +806,20 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; } - /*************************************/ + /*************************************/ /* Calculate the high division fator */ - /*************************************/ + /*************************************/ switch (b_TimingUnit) { - /******/ + /******/ /* ns */ - /******/ + /******/ case 0: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -828,9 +828,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * (0.00025 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -840,9 +840,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealHighTiming = @@ -892,15 +892,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /******/ + /******/ /* æs */ - /******/ + /******/ case 1: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -909,9 +909,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * (0.25 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -921,9 +921,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealHighTiming = @@ -975,15 +975,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /******/ + /******/ /* ms */ - /******/ + /******/ case 2: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -993,9 +993,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * b_ClockSelection); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -1005,9 +1005,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealHighTiming = @@ -1057,15 +1057,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /*****/ + /*****/ /* s */ - /*****/ + /*****/ case 3: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -1076,9 +1076,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -1088,9 +1088,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealHighTiming = @@ -1143,15 +1143,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, break; - /******/ + /******/ /* mn */ - /******/ + /******/ case 4: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -1165,9 +1165,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -1177,9 +1177,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ *pul_RealHighTiming = @@ -1239,9 +1239,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, } fpu_end(); - /****************************/ + /****************************/ /* Save the clock selection */ - /****************************/ + /****************************/ devpriv-> s_ModuleInfo @@ -1251,9 +1251,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, = b_ClockSelection; - /************************/ + /************************/ /* Save the timing unit */ - /************************/ + /************************/ devpriv-> s_ModuleInfo @@ -1265,9 +1265,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, = b_TimingUnit; - /****************************/ + /****************************/ /* Save the low base timing */ - /****************************/ + /****************************/ devpriv-> s_ModuleInfo @@ -1289,9 +1289,9 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, = *pul_RealLowTiming; - /****************************/ + /****************************/ /* Save the high base timing */ - /****************************/ + /****************************/ devpriv-> s_ModuleInfo @@ -1313,21 +1313,21 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, = *pul_RealHighTiming; - /************************/ + /************************/ /* Write the low timing */ - /************************/ + /************************/ outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr)); - /*************************/ + /*************************/ /* Write the high timing */ - /*************************/ + /*************************/ outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr)); - /***************************/ + /***************************/ /* Set the clock selection */ - /***************************/ + /***************************/ dw_Command = @@ -1354,15 +1354,15 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, 0x80; } - /***************************/ + /***************************/ /* Set the clock selection */ - /***************************/ + /***************************/ outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr)); - /*************/ + /*************/ /* PWM init. */ - /*************/ + /*************/ devpriv-> s_ModuleInfo [b_ModulNbr]. @@ -1373,65 +1373,65 @@ int i_APCI1710_InitPWM(struct comedi_device * dev, = 1; } else { - /***************************************************/ + /***************************************************/ /* You can not used the 40MHz clock selection with */ /* this board */ - /***************************************************/ + /***************************************************/ DPRINTK("You can not used the 40MHz clock selection with this board\n"); i_ReturnValue = -9; } } else { - /***************************************/ + /***************************************/ /* High base timing selection is wrong */ - /***************************************/ + /***************************************/ DPRINTK("High base timing selection is wrong\n"); i_ReturnValue = -8; } } else { - /**************************************/ + /**************************************/ /* Low base timing selection is wrong */ - /**************************************/ + /**************************************/ DPRINTK("Low base timing selection is wrong\n"); i_ReturnValue = -7; } - } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + } /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */ else { - /**********************************/ + /**********************************/ /* Timing unit selection is wrong */ - /**********************************/ + /**********************************/ DPRINTK("Timing unit selection is wrong\n"); i_ReturnValue = -6; - } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) - } // if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) + } /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */ + } /* if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) */ else { - /*******************************/ + /*******************************/ /* The selected clock is wrong */ - /*******************************/ + /*******************************/ DPRINTK("The selected clock is wrong\n"); i_ReturnValue = -5; - } // if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) */ + } /* if (b_PWM >= 0 && b_PWM <= 1) */ else { - /******************************/ + /******************************/ /* Tor PWM selection is wrong */ - /******************************/ + /******************************/ DPRINTK("Tor PWM selection is wrong\n"); i_ReturnValue = -4; - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (b_PWM >= 0 && b_PWM <= 1) */ } else { - /**********************************/ + /**********************************/ /* The module is not a PWM module */ - /**********************************/ + /**********************************/ DPRINTK("The module is not a PWM module\n"); i_ReturnValue = -3; } } else { - /***********************/ + /***********************/ /* Module number error */ - /***********************/ + /***********************/ DPRINTK("Module number error\n"); i_ReturnValue = -2; } @@ -1554,48 +1554,48 @@ int i_APCI1710_GetPWMInitialisation(struct comedi_device * dev, /**************************/ if (b_ModulNbr < 4) { - /***************/ + /***************/ /* Test if PWM */ - /***************/ + /***************/ if ((devpriv->s_BoardInfos. dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_PWM) { - /**************************/ + /**************************/ /* Test the PWM selection */ - /**************************/ + /**************************/ if (b_PWM <= 1) { - /***************************/ + /***************************/ /* Test if PWM initialised */ - /***************************/ + /***************************/ dw_Status = inl(devpriv->s_BoardInfos. ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr)); if (dw_Status & 0x10) { - /***********************/ + /***********************/ /* Read the low timing */ - /***********************/ + /***********************/ *pul_LowTiming = inl(devpriv->s_BoardInfos. ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr)); - /************************/ + /************************/ /* Read the high timing */ - /************************/ + /************************/ *pul_HighTiming = inl(devpriv->s_BoardInfos. ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr)); - /********************/ + /********************/ /* Read the command */ - /********************/ + /********************/ dw_Command = inl(devpriv->s_BoardInfos. ui_Address + 8 + (20 * b_PWM) + @@ -1619,9 +1619,9 @@ int i_APCI1710_GetPWMInitialisation(struct comedi_device * dev, 2) & 1); } - /********************/ + /********************/ /* Read the command */ - /********************/ + /********************/ dw_Command = inl(devpriv->s_BoardInfos. ui_Address + 8 + (20 * b_PWM) + @@ -1634,33 +1634,33 @@ int i_APCI1710_GetPWMInitialisation(struct comedi_device * dev, s_ModuleInfo[b_ModulNbr]. s_PWMModuleInfo. s_PWMInfo[b_PWM].b_TimingUnit; - } // if (dw_Status & 0x10) + } /* if (dw_Status & 0x10) */ else { - /***********************/ + /***********************/ /* PWM not initialised */ - /***********************/ + /***********************/ DPRINTK("PWM not initialised\n"); i_ReturnValue = -5; - } // if (dw_Status & 0x10) - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (dw_Status & 0x10) */ + } /* if (b_PWM >= 0 && b_PWM <= 1) */ else { - /******************************/ + /******************************/ /* Tor PWM selection is wrong */ - /******************************/ + /******************************/ DPRINTK("Tor PWM selection is wrong\n"); i_ReturnValue = -4; - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (b_PWM >= 0 && b_PWM <= 1) */ } else { - /**********************************/ + /**********************************/ /* The module is not a PWM module */ - /**********************************/ + /**********************************/ DPRINTK("The module is not a PWM module\n"); i_ReturnValue = -3; } } else { - /***********************/ + /***********************/ /* Module number error */ - /***********************/ + /***********************/ DPRINTK("Module number error\n"); i_ReturnValue = -2; } @@ -1817,66 +1817,66 @@ int i_APCI1710_EnablePWM(struct comedi_device * dev, unsigned int dw_Status; unsigned int dw_Command; - devpriv->tsk_Current = current; // Save the current process task structure + devpriv->tsk_Current = current; /* Save the current process task structure */ /**************************/ /* Test the module number */ /**************************/ if (b_ModulNbr < 4) { - /***************/ + /***************/ /* Test if PWM */ - /***************/ + /***************/ if ((devpriv->s_BoardInfos. dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_PWM) { - /**************************/ + /**************************/ /* Test the PWM selection */ - /**************************/ + /**************************/ if (b_PWM <= 1) { - /***************************/ + /***************************/ /* Test if PWM initialised */ - /***************************/ + /***************************/ dw_Status = inl(devpriv->s_BoardInfos. ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr)); if (dw_Status & 0x10) { - /**********************************/ + /**********************************/ /* Test the start level selection */ - /**********************************/ + /**********************************/ if (b_StartLevel <= 1) { - /**********************/ + /**********************/ /* Test the stop mode */ - /**********************/ + /**********************/ if (b_StopMode <= 1) { - /***********************/ + /***********************/ /* Test the stop level */ - /***********************/ + /***********************/ if (b_StopLevel <= 2) { - /*****************************/ + /*****************************/ /* Test the extern gate mode */ - /*****************************/ + /*****************************/ if (b_ExternGate <= 1) { - /*****************************/ + /*****************************/ /* Test the interrupt action */ - /*****************************/ + /*****************************/ if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) { - /******************************************/ + /******************************************/ /* Test if interrupt function initialised */ - /******************************************/ + /******************************************/ - /********************/ + /********************/ /* Read the command */ - /********************/ + /********************/ dw_Command = @@ -1895,9 +1895,9 @@ int i_APCI1710_EnablePWM(struct comedi_device * dev, & 0x80; - /********************/ + /********************/ /* Make the command */ - /********************/ + /********************/ dw_Command = @@ -1943,88 +1943,88 @@ int i_APCI1710_EnablePWM(struct comedi_device * dev, = b_InterruptEnable; - /*******************/ + /*******************/ /* Set the command */ - /*******************/ + /*******************/ outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr)); - /******************/ + /******************/ /* Enable the PWM */ - /******************/ + /******************/ outl(1, devpriv->s_BoardInfos.ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr)); - } // if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) + } /* if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) */ else { - /********************************/ + /********************************/ /* Interrupt parameter is wrong */ - /********************************/ + /********************************/ DPRINTK("Interrupt parameter is wrong\n"); i_ReturnValue = -10; - } // if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) - } // if (b_ExternGate >= 0 && b_ExternGate <= 1) + } /* if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) */ + } /* if (b_ExternGate >= 0 && b_ExternGate <= 1) */ else { - /*****************************************/ + /*****************************************/ /* Extern gate signal selection is wrong */ - /*****************************************/ + /*****************************************/ DPRINTK("Extern gate signal selection is wrong\n"); i_ReturnValue = -9; - } // if (b_ExternGate >= 0 && b_ExternGate <= 1) - } // if (b_StopLevel >= 0 && b_StopLevel <= 2) + } /* if (b_ExternGate >= 0 && b_ExternGate <= 1) */ + } /* if (b_StopLevel >= 0 && b_StopLevel <= 2) */ else { - /*************************************/ + /*************************************/ /* PWM stop level selection is wrong */ - /*************************************/ + /*************************************/ DPRINTK("PWM stop level selection is wrong\n"); i_ReturnValue = -8; - } // if (b_StopLevel >= 0 && b_StopLevel <= 2) - } // if (b_StopMode >= 0 && b_StopMode <= 1) + } /* if (b_StopLevel >= 0 && b_StopLevel <= 2) */ + } /* if (b_StopMode >= 0 && b_StopMode <= 1) */ else { - /************************************/ + /************************************/ /* PWM stop mode selection is wrong */ - /************************************/ + /************************************/ DPRINTK("PWM stop mode selection is wrong\n"); i_ReturnValue = -7; - } // if (b_StopMode >= 0 && b_StopMode <= 1) - } // if (b_StartLevel >= 0 && b_StartLevel <= 1) + } /* if (b_StopMode >= 0 && b_StopMode <= 1) */ + } /* if (b_StartLevel >= 0 && b_StartLevel <= 1) */ else { - /**************************************/ + /**************************************/ /* PWM start level selection is wrong */ - /**************************************/ + /**************************************/ DPRINTK("PWM start level selection is wrong\n"); i_ReturnValue = -6; - } // if (b_StartLevel >= 0 && b_StartLevel <= 1) - } // if (dw_Status & 0x10) + } /* if (b_StartLevel >= 0 && b_StartLevel <= 1) */ + } /* if (dw_Status & 0x10) */ else { - /***********************/ + /***********************/ /* PWM not initialised */ - /***********************/ + /***********************/ DPRINTK("PWM not initialised\n"); i_ReturnValue = -5; - } // if (dw_Status & 0x10) - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (dw_Status & 0x10) */ + } /* if (b_PWM >= 0 && b_PWM <= 1) */ else { - /******************************/ + /******************************/ /* Tor PWM selection is wrong */ - /******************************/ + /******************************/ DPRINTK("Tor PWM selection is wrong\n"); i_ReturnValue = -4; - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (b_PWM >= 0 && b_PWM <= 1) */ } else { - /**********************************/ + /**********************************/ /* The module is not a PWM module */ - /**********************************/ + /**********************************/ DPRINTK("The module is not a PWM module\n"); i_ReturnValue = -3; } } else { - /***********************/ + /***********************/ /* Module number error */ - /***********************/ + /***********************/ DPRINTK("Module number error\n"); i_ReturnValue = -2; } @@ -2072,74 +2072,74 @@ int i_APCI1710_DisablePWM(struct comedi_device * dev, unsigned char b_ModulNbr, /**************************/ if (b_ModulNbr < 4) { - /***************/ + /***************/ /* Test if PWM */ - /***************/ + /***************/ if ((devpriv->s_BoardInfos. dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_PWM) { - /**************************/ + /**************************/ /* Test the PWM selection */ - /**************************/ + /**************************/ if (b_PWM <= 1) { - /***************************/ + /***************************/ /* Test if PWM initialised */ - /***************************/ + /***************************/ dw_Status = inl(devpriv->s_BoardInfos. ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr)); if (dw_Status & 0x10) { - /***********************/ + /***********************/ /* Test if PWM enabled */ - /***********************/ + /***********************/ if (dw_Status & 0x1) { - /*******************/ + /*******************/ /* Disable the PWM */ - /*******************/ + /*******************/ outl(0, devpriv->s_BoardInfos. ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr)); - } // if (dw_Status & 0x1) + } /* if (dw_Status & 0x1) */ else { - /*******************/ + /*******************/ /* PWM not enabled */ - /*******************/ + /*******************/ DPRINTK("PWM not enabled\n"); i_ReturnValue = -6; - } // if (dw_Status & 0x1) - } // if (dw_Status & 0x10) + } /* if (dw_Status & 0x1) */ + } /* if (dw_Status & 0x10) */ else { - /***********************/ + /***********************/ /* PWM not initialised */ - /***********************/ + /***********************/ DPRINTK(" PWM not initialised\n"); i_ReturnValue = -5; - } // if (dw_Status & 0x10) - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (dw_Status & 0x10) */ + } /* if (b_PWM >= 0 && b_PWM <= 1) */ else { - /******************************/ + /******************************/ /* Tor PWM selection is wrong */ - /******************************/ + /******************************/ DPRINTK("Tor PWM selection is wrong\n"); i_ReturnValue = -4; - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (b_PWM >= 0 && b_PWM <= 1) */ } else { - /**********************************/ + /**********************************/ /* The module is not a PWM module */ - /**********************************/ + /**********************************/ DPRINTK("The module is not a PWM module\n"); i_ReturnValue = -3; } } else { - /***********************/ + /***********************/ /* Module number error */ - /***********************/ + /***********************/ DPRINTK("Module number error\n"); i_ReturnValue = -2; } @@ -2209,21 +2209,21 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, /**************************/ if (b_ModulNbr < 4) { - /***************/ + /***************/ /* Test if PWM */ - /***************/ + /***************/ if ((devpriv->s_BoardInfos. dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_PWM) { - /**************************/ + /**************************/ /* Test the PWM selection */ - /**************************/ + /**************************/ if (b_PWM <= 1) { - /***************************/ + /***************************/ /* Test if PWM initialised */ - /***************************/ + /***************************/ dw_Status = inl(devpriv->s_BoardInfos. ui_Address + 12 + (20 * b_PWM) + @@ -2235,14 +2235,14 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, s_PWMModuleInfo. b_ClockSelection; - /************************/ + /************************/ /* Test the timing unit */ - /************************/ + /************************/ if (b_TimingUnit <= 4) { - /*********************************/ + /*********************************/ /* Test the low timing selection */ - /*********************************/ + /*********************************/ if (((b_ClockSelection == APCI1710_30MHZ) @@ -2377,26 +2377,26 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, && (ul_LowTiming <= 7UL))) { - /**********************************/ + /**********************************/ /* Test the High timing selection */ - /**********************************/ + /**********************************/ if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) { - /************************************/ + /************************************/ /* Calculate the low division fator */ - /************************************/ + /************************************/ fpu_begin(); switch (b_TimingUnit) { - /******/ + /******/ /* ns */ - /******/ + /******/ case 0: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -2405,9 +2405,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * (0.00025 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -2417,9 +2417,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealLowTiming = @@ -2469,15 +2469,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /******/ + /******/ /* æs */ - /******/ + /******/ case 1: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -2486,9 +2486,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * (0.25 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -2498,9 +2498,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealLowTiming = @@ -2552,15 +2552,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /******/ + /******/ /* ms */ - /******/ + /******/ case 2: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -2570,9 +2570,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * b_ClockSelection); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -2582,9 +2582,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealLowTiming = @@ -2634,15 +2634,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /*****/ + /*****/ /* s */ - /*****/ + /*****/ case 3: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -2653,9 +2653,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -2665,9 +2665,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealLowTiming = @@ -2720,15 +2720,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /******/ + /******/ /* mn */ - /******/ + /******/ case 4: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_LowTimerValue = @@ -2742,9 +2742,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { ul_LowTimerValue @@ -2754,9 +2754,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealLowTiming = @@ -2815,20 +2815,20 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; } - /*************************************/ + /*************************************/ /* Calculate the high division fator */ - /*************************************/ + /*************************************/ switch (b_TimingUnit) { - /******/ + /******/ /* ns */ - /******/ + /******/ case 0: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -2837,9 +2837,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * (0.00025 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -2849,9 +2849,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealHighTiming = @@ -2901,15 +2901,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /******/ + /******/ /* æs */ - /******/ + /******/ case 1: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -2918,9 +2918,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * (0.25 * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -2930,9 +2930,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealHighTiming = @@ -2984,15 +2984,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /******/ + /******/ /* ms */ - /******/ + /******/ case 2: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -3002,9 +3002,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * b_ClockSelection); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -3014,9 +3014,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealHighTiming = @@ -3066,15 +3066,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /*****/ + /*****/ /* s */ - /*****/ + /*****/ case 3: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -3085,9 +3085,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -3097,9 +3097,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealHighTiming = @@ -3152,15 +3152,15 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, break; - /******/ + /******/ /* mn */ - /******/ + /******/ case 4: - /******************/ + /******************/ /* Timer 0 factor */ - /******************/ + /******************/ ul_HighTimerValue = @@ -3174,9 +3174,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, * b_ClockSelection)); - /*******************/ + /*******************/ /* Round the value */ - /*******************/ + /*******************/ if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { ul_HighTimerValue @@ -3186,9 +3186,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 1; } - /*****************************/ + /*****************************/ /* Calculate the real timing */ - /*****************************/ + /*****************************/ ul_RealHighTiming = @@ -3249,9 +3249,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, fpu_end(); - /************************/ + /************************/ /* Save the timing unit */ - /************************/ + /************************/ devpriv-> s_ModuleInfo @@ -3263,9 +3263,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, = b_TimingUnit; - /****************************/ + /****************************/ /* Save the low base timing */ - /****************************/ + /****************************/ devpriv-> s_ModuleInfo @@ -3287,9 +3287,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, = ul_RealLowTiming; - /****************************/ + /****************************/ /* Save the high base timing */ - /****************************/ + /****************************/ devpriv-> s_ModuleInfo @@ -3311,21 +3311,21 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, = ul_RealHighTiming; - /************************/ + /************************/ /* Write the low timing */ - /************************/ + /************************/ outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr)); - /*************************/ + /*************************/ /* Write the high timing */ - /*************************/ + /*************************/ outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr)); - /***************************/ + /***************************/ /* Set the clock selection */ - /***************************/ + /***************************/ dw_Command = inl @@ -3347,9 +3347,9 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, 0x80; } - /***************************/ + /***************************/ /* Set the clock selection */ - /***************************/ + /***************************/ outl(dw_Command, devpriv-> @@ -3358,55 +3358,55 @@ int i_APCI1710_SetNewPWMTiming(struct comedi_device * dev, + 8 + (20 * b_PWM) + (64 * b_ModulNbr)); } else { - /***************************************/ + /***************************************/ /* High base timing selection is wrong */ - /***************************************/ + /***************************************/ DPRINTK("High base timing selection is wrong\n"); i_ReturnValue = -8; } } else { - /**************************************/ + /**************************************/ /* Low base timing selection is wrong */ - /**************************************/ + /**************************************/ DPRINTK("Low base timing selection is wrong\n"); i_ReturnValue = -7; } - } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + } /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */ else { - /**********************************/ + /**********************************/ /* Timing unit selection is wrong */ - /**********************************/ + /**********************************/ DPRINTK("Timing unit selection is wrong\n"); i_ReturnValue = -6; - } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) - } // if (dw_Status & 0x10) + } /* if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) */ + } /* if (dw_Status & 0x10) */ else { - /***********************/ + /***********************/ /* PWM not initialised */ - /***********************/ + /***********************/ DPRINTK("PWM not initialised\n"); i_ReturnValue = -5; - } // if (dw_Status & 0x10) - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (dw_Status & 0x10) */ + } /* if (b_PWM >= 0 && b_PWM <= 1) */ else { - /******************************/ + /******************************/ /* Tor PWM selection is wrong */ - /******************************/ + /******************************/ DPRINTK("Tor PWM selection is wrong\n"); i_ReturnValue = -4; - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (b_PWM >= 0 && b_PWM <= 1) */ } else { - /**********************************/ + /**********************************/ /* The module is not a PWM module */ - /**********************************/ + /**********************************/ DPRINTK("The module is not a PWM module\n"); i_ReturnValue = -3; } } else { - /***********************/ + /***********************/ /* Module number error */ - /***********************/ + /***********************/ DPRINTK("Module number error\n"); i_ReturnValue = -2; } @@ -3482,30 +3482,30 @@ int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device * dev, struct comedi_su /**************************/ if (b_ModulNbr < 4) { - /***************/ + /***************/ /* Test if PWM */ - /***************/ + /***************/ if ((devpriv->s_BoardInfos. dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == APCI1710_PWM) { - /**************************/ + /**************************/ /* Test the PWM selection */ - /**************************/ + /**************************/ if (b_PWM <= 1) { - /***************************/ + /***************************/ /* Test if PWM initialised */ - /***************************/ + /***************************/ dw_Status = inl(devpriv->s_BoardInfos. ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr)); if (dw_Status & 0x10) { - /***********************/ + /***********************/ /* Test if PWM enabled */ - /***********************/ + /***********************/ if (dw_Status & 0x1) { *pb_PWMOutputStatus = @@ -3514,45 +3514,45 @@ int i_APCI1710_InsnReadGetPWMStatus(struct comedi_device * dev, struct comedi_su *pb_ExternGateStatus = (unsigned char) ((dw_Status >> 6) & 1); - } // if (dw_Status & 0x1) + } /* if (dw_Status & 0x1) */ else { - /*******************/ + /*******************/ /* PWM not enabled */ - /*******************/ + /*******************/ DPRINTK("PWM not enabled \n"); i_ReturnValue = -6; - } // if (dw_Status & 0x1) - } // if (dw_Status & 0x10) + } /* if (dw_Status & 0x1) */ + } /* if (dw_Status & 0x10) */ else { - /***********************/ + /***********************/ /* PWM not initialised */ - /***********************/ + /***********************/ DPRINTK("PWM not initialised\n"); i_ReturnValue = -5; - } // if (dw_Status & 0x10) - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (dw_Status & 0x10) */ + } /* if (b_PWM >= 0 && b_PWM <= 1) */ else { - /******************************/ + /******************************/ /* Tor PWM selection is wrong */ - /******************************/ + /******************************/ DPRINTK("Tor PWM selection is wrong\n"); i_ReturnValue = -4; - } // if (b_PWM >= 0 && b_PWM <= 1) + } /* if (b_PWM >= 0 && b_PWM <= 1) */ } else { - /**********************************/ + /**********************************/ /* The module is not a PWM module */ - /**********************************/ + /**********************************/ DPRINTK("The module is not a PWM module\n"); i_ReturnValue = -3; } } else { - /***********************/ + /***********************/ /* Module number error */ - /***********************/ + /***********************/ DPRINTK("Module number error\n"); i_ReturnValue = -2; @@ -3574,9 +3574,9 @@ int i_APCI1710_InsnBitsReadPWMInterrupt(struct comedi_device * dev, s_FIFOInterruptParameters[devpriv-> s_InterruptParameters.ui_Read].ul_OldCounterLatchValue; - /**************************/ + /**************************/ /* Increment the read FIFO */ - /***************************/ + /***************************/ devpriv-> s_InterruptParameters.