From: Bitterblue Smith Date: Wed, 28 Sep 2022 20:36:51 +0000 (+0300) Subject: wifi: rtl8xxxu: gen2: Turn on the rate control X-Git-Tag: v6.1.15~88 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0076bded9663da1bb7ec4dfe0e4c36e84280e353;p=platform%2Fkernel%2Flinux-starfive.git wifi: rtl8xxxu: gen2: Turn on the rate control [ Upstream commit 791082ec0ab843e0be07c8ce3678e4c2afd2e33d ] Re-enable the function rtl8xxxu_gen2_report_connect. It informs the firmware when connecting to a network. This makes the firmware enable the rate control, which makes the upload faster. It also informs the firmware when disconnecting from a network. In the past this made reconnecting impossible because it was sending the auth on queue 0x7 (TXDESC_QUEUE_VO) instead of queue 0x12 (TXDESC_QUEUE_MGNT): wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 1/3) wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 2/3) wlp0s20f0u3: send auth to 90:55:de:__:__:__ (try 3/3) wlp0s20f0u3: authentication with 90:55:de:__:__:__ timed out Probably the firmware disables the unnecessary TX queues when it knows it's disconnected. However, this was fixed in commit edd5747aa12e ("wifi: rtl8xxxu: Fix skb misuse in TX queue selection"). Fixes: c59f13bbead4 ("rtl8xxxu: Work around issue with 8192eu and 8723bu devices not reconnecting") Signed-off-by: Bitterblue Smith Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/43200afc-0c65-ee72-48f8-231edd1df493@gmail.com Signed-off-by: Sasha Levin --- diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index e9c1b62c..e445084 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -4389,12 +4389,9 @@ void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, u8 macid, bool connect) { -#ifdef RTL8XXXU_GEN2_REPORT_CONNECT /* - * Barry Day reports this causes issues with 8192eu and 8723bu - * devices reconnecting. The reason for this is unclear, but - * until it is better understood, leave the code in place but - * disabled, so it is not lost. + * The firmware turns on the rate control when it knows it's + * connected to a network. */ struct h2c_cmd h2c; @@ -4407,7 +4404,6 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, h2c.media_status_rpt.parm &= ~BIT(0); rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt)); -#endif } void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)