From: Marek Vasut <marex@denx.de>
Date: Fri, 17 May 2019 14:58:52 +0000 (+0200)
Subject: ARM: imx: dh-imx6: Convert SATA support to DM
X-Git-Tag: v2019.07~36^2~70
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0050c929c23077763bfea639a338054985bab8b3;p=platform%2Fkernel%2Fu-boot.git

ARM: imx: dh-imx6: Convert SATA support to DM

Enable DM SATA support on DHCOM iMX6 PDK2.
Convert board code to match the DM support.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
---

diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c
index 193bb0e..737d9c6 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -20,6 +20,8 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/sata.h>
+#include <ahci.h>
+#include <dwc_ahsata.h>
 #include <environment.h>
 #include <errno.h>
 #include <fsl_esdhc.h>
@@ -302,10 +304,6 @@ int board_init(void)
 	}
 #endif
 
-#ifdef CONFIG_SATA
-	setup_sata();
-#endif
-
 	setup_dhcom_mac_from_fuse();
 
 	return 0;
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
index 37c2f01..541f5f3 100644
--- a/configs/dh_imx6_defconfig
+++ b/configs/dh_imx6_defconfig
@@ -14,6 +14,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
@@ -60,6 +61,7 @@ CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_SCSI=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 3eee382..e68467d 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -63,12 +63,7 @@
 #define CONFIG_SYS_MMC_ENV_DEV		2 /* 1 = SDHC3, 2 = SDHC4 (eMMC) */
 
 /* SATA Configs */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#endif
 
 /* SPI Flash Configs */