From: Wolfgang Denk Date: Mon, 29 Mar 2010 10:33:43 +0000 (+0200) Subject: Merge remote branch 'origin/master' into next X-Git-Tag: v2010.06-rc1~139^2~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=0020db3f0da61f3e2c8a459a87598e07594dc8ac;hp=2883cc2d48e99fd1873ef8af03fee7966611b735;p=platform%2Fkernel%2Fu-boot.git Merge remote branch 'origin/master' into next --- diff --git a/CREDITS b/CREDITS index 2471029..043ba6e 100644 --- a/CREDITS +++ b/CREDITS @@ -511,6 +511,11 @@ N: Martin Winistoerfer E: martinwinistoerfer@gmx.ch D: Port to MPC555/556 microcontrollers and support for cmi board +N: David Wu +E: support@arcturusnetworks.com +D: Mercury Security EP2500 +W: http://www.arcturusnetworks.com + N: Ming-Len Wu E: minglen_wu@techware.com.tw D: Motorola MX1ADS board support diff --git a/MAINTAINERS b/MAINTAINERS index 80057ce..bb03f17 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -80,7 +80,6 @@ Torsten Demke Wolfgang Denk - IceCube_5100 MGT5100 IceCube_5200 MPC5200 ARIA MPC5121e @@ -890,6 +889,10 @@ TsiChung Liew M5475EVB mcf547x_8x M5485EVB mcf547x_8x +Wolfgang Wegner + + astro_mcf5373l MCF5373L + ######################################################################### # AVR32 Systems: # # # diff --git a/MAKEALL b/MAKEALL index 5c303f9..a88c31e 100755 --- a/MAKEALL +++ b/MAKEALL @@ -61,7 +61,6 @@ LIST_5xxx=" \ EVAL5200 \ fo300 \ galaxy5200 \ - icecube_5100 \ icecube_5200 \ inka4x0 \ ipek01 \ @@ -76,7 +75,6 @@ LIST_5xxx=" \ pf5200 \ PM520 \ TB5200 \ - Total5100 \ Total5200 \ Total5200_Rev2 \ TQM5200 \ @@ -840,6 +838,7 @@ LIST_microblaze=" \ ######################################################################### LIST_coldfire=" \ + astro_mcf5373l \ cobra5272 \ EB+MCF-EV123 \ EB+MCF-EV123_internal \ diff --git a/Makefile b/Makefile index 67e62d7..c0e73de 100644 --- a/Makefile +++ b/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2009 +# (C) Copyright 2000-2010 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -548,8 +548,7 @@ icecube_5200_LOWBOOT_config \ icecube_5200_LOWBOOT08_config \ icecube_5200_DDR_config \ icecube_5200_DDR_LOWBOOT_config \ -icecube_5200_DDR_LOWBOOT08_config \ -icecube_5100_config: unconfig +icecube_5200_DDR_LOWBOOT08_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @[ -z "$(findstring LOWBOOT_,$@)" ] || \ @@ -568,14 +567,6 @@ icecube_5100_config: unconfig { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ $(XECHO) "... DDR memory revision" ; \ } - @[ -z "$(findstring 5200,$@)" ] || \ - { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ - $(XECHO) "... with MPC5200 processor" ; \ - } - @[ -z "$(findstring 5100,$@)" ] || \ - { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ - $(XECHO) "... with MGT5100 processor" ; \ - } @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube jupiter_config: unconfig @@ -594,7 +585,6 @@ lite5200b_LOWBOOT_config: unconfig @mkdir -p $(obj)board/icecube @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h @ $(XECHO) "... DDR memory revision" - @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h @[ -z "$(findstring _PM_,$@)" ] || \ { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ @@ -604,7 +594,6 @@ lite5200b_LOWBOOT_config: unconfig { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ $(XECHO) "... with LOWBOOT configuration" ; \ } - @ $(XECHO) "... with MPC5200B processor" @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube mcc200_config \ @@ -728,21 +717,12 @@ TOP5200_config: unconfig @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk -Total5100_config \ Total5200_config \ Total5200_lowboot_config \ Total5200_Rev2_config \ Total5200_Rev2_lowboot_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/total5200 - @[ -z "$(findstring 5100,$@)" ] || \ - { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ - $(XECHO) "... with MGT5100 processor" ; \ - } - @[ -z "$(findstring 5200,$@)" ] || \ - { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ - $(XECHO) "... with MPC5200 processor" ; \ - } @[ -n "$(findstring Rev,$@)" ] || \ { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ $(XECHO) "... revision 1 board" ; \ @@ -1993,6 +1973,10 @@ ZPC1900_config: unconfig ## Coldfire ######################################################################### +astro_mcf5373l_config \ +astro_mcf5373l_RAM_config : unconfig + @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro + M5208EVBE_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale @@ -2061,6 +2045,9 @@ EB+MCF-EV123_internal_config : unconfig @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS +EP2500_config: unconfig + @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury + idmr_config : unconfig @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr diff --git a/board/astro/mcf5373l/Makefile b/board/astro/mcf5373l/Makefile new file mode 100644 index 0000000..c7a1d05 --- /dev/null +++ b/board/astro/mcf5373l/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o fpga.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/astro/mcf5373l/astro.h b/board/astro/mcf5373l/astro.h new file mode 100644 index 0000000..b55a6f7 --- /dev/null +++ b/board/astro/mcf5373l/astro.h @@ -0,0 +1,44 @@ +#ifndef __ASTRO_H__ +#define __ASTRO_H__ + +/* in mcf5373l.c */ +int rs_serial_init(int port, int baud); +void astro_put_char(char ch); +int astro_is_char(void); +int astro_get_char(void); + +/* in fpga.c */ +int astro5373l_altera_load(void); +int astro5373l_xilinx_load(void); + +/* data structures used for communication (update.c) */ +typedef struct card_id { + char card_type; + char hardware_version; + char software_version; + char software_subversion; /* " ","a".."z" */ + char fpga_version_altera; + char fpga_version_xilinx; +} card_id_t; + +typedef struct { + unsigned char mode; + unsigned char deviation; + unsigned short freq; +} __attribute__ ((packed)) output_params_t; + +typedef struct { + unsigned short satfreq; + unsigned char satdatallg; + unsigned short symbolrate; + unsigned char viterbirate; + unsigned char symbolrate_l; + output_params_t output_params; + unsigned char reserve; + unsigned char card_error; + unsigned short dummy_ts_id; + unsigned char dummy_pat_ver; + unsigned char dummy_sdt_ver; +} __attribute__ ((packed)) parameters_t; + +#endif /* __ASTRO_H__ */ diff --git a/board/astro/mcf5373l/config.mk b/board/astro/mcf5373l/config.mk new file mode 100644 index 0000000..6316a30 --- /dev/null +++ b/board/astro/mcf5373l/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Coldfire contribution by Bernhard Kuhn +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = $(CONFIG_TEXT_BASE) + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) diff --git a/board/astro/mcf5373l/fpga.c b/board/astro/mcf5373l/fpga.c new file mode 100644 index 0000000..467461b --- /dev/null +++ b/board/astro/mcf5373l/fpga.c @@ -0,0 +1,425 @@ +/* + * (C) Copyright 2006 + * Wolfgang Wegner, ASTRO Strobel Kommunikationssysteme GmbH, + * w.wegner@astro-kom.de + * + * based on the files by + * Heiko Schocher, DENX Software Engineering, hs@denx.de + * and + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* Altera/Xilinx FPGA configuration support for the ASTRO "URMEL" board */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "fpga.h" + +DECLARE_GLOBAL_DATA_PTR; + +int altera_pre_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char tmp_char; + unsigned short tmp_short; + + /* first, set the required pins to GPIO function */ + /* PAR_T0IN -> GPIO */ + tmp_char = readb(&gpiop->par_timer); + tmp_char &= 0xfc; + writeb(tmp_char, &gpiop->par_timer); + /* all QSPI pins -> GPIO */ + writew(0x0000, &gpiop->par_qspi); + /* U0RTS, U0CTS -> GPIO */ + tmp_short = __raw_readw(&gpiop->par_uart); + tmp_short &= 0xfff3; + __raw_writew(tmp_short, &gpiop->par_uart); + /* all PWM pins -> GPIO */ + writeb(0x00, &gpiop->par_pwm); + /* next, set data direction registers */ + writeb(0x01, &gpiop->pddr_timer); + writeb(0x25, &gpiop->pddr_qspi); + writeb(0x0c, &gpiop->pddr_uart); + writeb(0x04, &gpiop->pddr_pwm); + + /* ensure other SPI peripherals are deselected */ + writeb(0x08, &gpiop->ppd_uart); + writeb(0x38, &gpiop->ppd_qspi); + + /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */ + writeb(0xFB, &gpiop->pclrr_uart); + /* enable Altera configuration by clearing QSPI_CS2 and DT0IN */ + writeb(0xFE, &gpiop->pclrr_timer); + writeb(0xDF, &gpiop->pclrr_qspi); + return FPGA_SUCCESS; +} + +/* Set the state of CONFIG Pin */ +int altera_config_fn(int assert_config, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert_config) + writeb(0x04, &gpiop->ppd_uart); + else + writeb(0xFB, &gpiop->pclrr_uart); + return FPGA_SUCCESS; +} + +/* Returns the state of STATUS Pin */ +int altera_status_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (readb(&gpiop->ppd_pwm) & 0x08) + return FPGA_FAIL; + return FPGA_SUCCESS; +} + +/* Returns the state of CONF_DONE Pin */ +int altera_done_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (readb(&gpiop->ppd_pwm) & 0x20) + return FPGA_FAIL; + return FPGA_SUCCESS; +} + +/* + * writes the complete buffer to the FPGA + * writing the complete buffer in one function is much faster, + * then calling it for every bit + */ +int altera_write_fn(void *buf, size_t len, int flush, int cookie) +{ + size_t bytecount = 0; + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char *data = (unsigned char *)buf; + unsigned char val = 0; + int i; + int len_40 = len / 40; + + while (bytecount < len) { + val = data[bytecount++]; + i = 8; + do { + writeb(0xFB, &gpiop->pclrr_qspi); + if (val & 0x01) + writeb(0x01, &gpiop->ppd_qspi); + else + writeb(0xFE, &gpiop->pclrr_qspi); + writeb(0x04, &gpiop->ppd_qspi); + val >>= 1; + i--; + } while (i > 0); + + if (bytecount % len_40 == 0) { +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + WATCHDOG_RESET(); +#endif +#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK + putc('.'); /* let them know we are alive */ +#endif +#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC + if (ctrlc()) + return FPGA_FAIL; +#endif + } + } + return FPGA_SUCCESS; +} + +/* called, when programming is aborted */ +int altera_abort_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + writeb(0x20, &gpiop->ppd_qspi); + writeb(0x08, &gpiop->ppd_uart); + return FPGA_SUCCESS; +} + +/* called, when programming was succesful */ +int altera_post_fn(int cookie) +{ + return altera_abort_fn(cookie); +} + +/* + * Note that these are pointers to code that is in Flash. They will be + * relocated at runtime. + * FIXME: relocation not yet working for coldfire, see below! + */ +Altera_CYC2_Passive_Serial_fns altera_fns = { + altera_pre_fn, + altera_config_fn, + altera_status_fn, + altera_done_fn, + altera_write_fn, + altera_abort_fn, + altera_post_fn +}; + +Altera_desc altera_fpga[CONFIG_FPGA_COUNT] = { + {Altera_CYC2, + passive_serial, + 85903, + (void *)&altera_fns, + NULL, + 0} +}; + +/* Initialize the fpga. Return 1 on success, 0 on failure. */ +int astro5373l_altera_load(void) +{ + int i; + + for (i = 0; i < CONFIG_FPGA_COUNT; i++) { + /* + * I did not yet manage to get relocation work properly, + * so set stuff here instead of static initialisation: + */ + altera_fns.pre = altera_pre_fn; + altera_fns.config = altera_config_fn; + altera_fns.status = altera_status_fn; + altera_fns.done = altera_done_fn; + altera_fns.write = altera_write_fn; + altera_fns.abort = altera_abort_fn; + altera_fns.post = altera_post_fn; + altera_fpga[i].iface_fns = (void *)&altera_fns; + fpga_add(fpga_altera, &altera_fpga[i]); + } + return 1; +} + +/* Set the FPGA's PROG_B line to the specified level */ +int xilinx_pgm_fn(int assert, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert) + writeb(0xFB, &gpiop->pclrr_uart); + else + writeb(0x04, &gpiop->ppd_uart); + return assert; +} + +/* + * Test the state of the active-low FPGA INIT line. Return 1 on INIT + * asserted (low). + */ +int xilinx_init_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + return (readb(&gpiop->ppd_pwm) & 0x08) == 0; +} + +/* Test the state of the active-high FPGA DONE pin */ +int xilinx_done_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + return (readb(&gpiop->ppd_pwm) & 0x20) >> 5; +} + +/* Abort an FPGA operation */ +int xilinx_abort_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + /* ensure all SPI peripherals and FPGAs are deselected */ + writeb(0x08, &gpiop->ppd_uart); + writeb(0x01, &gpiop->ppd_timer); + writeb(0x38, &gpiop->ppd_qspi); + return FPGA_FAIL; +} + +/* + * FPGA pre-configuration function. Just make sure that + * FPGA reset is asserted to keep the FPGA from starting up after + * configuration. + */ +int xilinx_pre_config_fn(int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char tmp_char; + unsigned short tmp_short; + + /* first, set the required pins to GPIO function */ + /* PAR_T0IN -> GPIO */ + tmp_char = readb(&gpiop->par_timer); + tmp_char &= 0xfc; + writeb(tmp_char, &gpiop->par_timer); + /* all QSPI pins -> GPIO */ + writew(0x0000, &gpiop->par_qspi); + /* U0RTS, U0CTS -> GPIO */ + tmp_short = __raw_readw(&gpiop->par_uart); + tmp_short &= 0xfff3; + __raw_writew(tmp_short, &gpiop->par_uart); + /* all PWM pins -> GPIO */ + writeb(0x00, &gpiop->par_pwm); + /* next, set data direction registers */ + writeb(0x01, &gpiop->pddr_timer); + writeb(0x25, &gpiop->pddr_qspi); + writeb(0x0c, &gpiop->pddr_uart); + writeb(0x04, &gpiop->pddr_pwm); + + /* ensure other SPI peripherals are deselected */ + writeb(0x08, &gpiop->ppd_uart); + writeb(0x38, &gpiop->ppd_qspi); + writeb(0x01, &gpiop->ppd_timer); + + /* CONFIG = 0, STATUS = 0 -> FPGA in reset state */ + writeb(0xFB, &gpiop->pclrr_uart); + /* enable Xilinx configuration by clearing QSPI_CS2 and U0CTS */ + writeb(0xF7, &gpiop->pclrr_uart); + writeb(0xDF, &gpiop->pclrr_qspi); + return 0; +} + +/* + * FPGA post configuration function. Should perform a test if FPGA is running. + */ +int xilinx_post_config_fn(int cookie) +{ + int rc = 0; + + /* + * no test yet + */ + return rc; +} + +int xilinx_clk_fn(int assert_clk, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert_clk) + writeb(0x04, &gpiop->ppd_qspi); + else + writeb(0xFB, &gpiop->pclrr_qspi); + return assert_clk; +} + +int xilinx_wr_fn(int assert_write, int flush, int cookie) +{ + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + + if (assert_write) + writeb(0x01, &gpiop->ppd_qspi); + else + writeb(0xFE, &gpiop->pclrr_qspi); + return assert_write; +} + +int xilinx_fastwr_fn(void *buf, size_t len, int flush, int cookie) +{ + size_t bytecount = 0; + gpio_t *gpiop = (gpio_t *)MMAP_GPIO; + unsigned char *data = (unsigned char *)buf; + unsigned char val = 0; + int i; + int len_40 = len / 40; + + for (bytecount = 0; bytecount < len; bytecount++) { + val = *(data++); + for (i = 8; i > 0; i--) { + writeb(0xFB, &gpiop->pclrr_qspi); + if (val & 0x80) + writeb(0x01, &gpiop->ppd_qspi); + else + writeb(0xFE, &gpiop->pclrr_qspi); + writeb(0x04, &gpiop->ppd_qspi); + val <<= 1; + } + if (bytecount % len_40 == 0) { +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + WATCHDOG_RESET(); +#endif +#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK + putc('.'); /* let them know we are alive */ +#endif +#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC + if (ctrlc()) + return FPGA_FAIL; +#endif + } + } + return FPGA_SUCCESS; +} + +/* + * Note that these are pointers to code that is in Flash. They will be + * relocated at runtime. + * FIXME: relocation not yet working for coldfire, see below! + */ +Xilinx_Spartan3_Slave_Serial_fns xilinx_fns = { + xilinx_pre_config_fn, + xilinx_pgm_fn, + xilinx_clk_fn, + xilinx_init_fn, + xilinx_done_fn, + xilinx_wr_fn, + 0, + xilinx_fastwr_fn +}; + +Xilinx_desc xilinx_fpga[CONFIG_FPGA_COUNT] = { + {Xilinx_Spartan3, + slave_serial, + XILINX_XC3S4000_SIZE, + (void *)&xilinx_fns, + 0} +}; + +/* Initialize the fpga. Return 1 on success, 0 on failure. */ +int astro5373l_xilinx_load(void) +{ + int i; + + fpga_init(); + + for (i = 0; i < CONFIG_FPGA_COUNT; i++) { + /* + * I did not yet manage to get relocation work properly, + * so set stuff here instead of static initialisation: + */ + xilinx_fns.pre = xilinx_pre_config_fn; + xilinx_fns.pgm = xilinx_pgm_fn; + xilinx_fns.clk = xilinx_clk_fn; + xilinx_fns.init = xilinx_init_fn; + xilinx_fns.done = xilinx_done_fn; + xilinx_fns.wr = xilinx_wr_fn; + xilinx_fns.bwr = xilinx_fastwr_fn; + xilinx_fpga[i].iface_fns = (void *)&xilinx_fns; + fpga_add(fpga_xilinx, &xilinx_fpga[i]); + } + return 1; +} diff --git a/board/astro/mcf5373l/mcf5373l.c b/board/astro/mcf5373l/mcf5373l.c new file mode 100644 index 0000000..3c09a21 --- /dev/null +++ b/board/astro/mcf5373l/mcf5373l.c @@ -0,0 +1,211 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * modified by Wolfgang Wegner for ASTRO 5373l + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +/* needed for astro bus: */ +#include +#include "astro.h" + +DECLARE_GLOBAL_DATA_PTR; +extern void uart_port_conf(void); + +int checkboard(void) +{ + puts("Board: "); + puts("ASTRO MCF5373L (Urmel) Board\n"); + return 0; +} + +phys_size_t initdram(int board_type) +{ +#if !defined(CONFIG_MONITOR_IS_IN_RAM) + sdram_t *sdp = (sdram_t *)(MMAP_SDRAM); + + /* + * GPIO configuration for bus should be set correctly from reset, + * so we do not care! First, set up address space: at this point, + * we should be running from internal SRAM; + * so use CONFIG_SYS_SDRAM_BASE as the base address for SDRAM, + * and do not care where it is + */ + __raw_writel((CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | 0x00000018, + &sdp->cs0); + __raw_writel((CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | 0x00000000, + &sdp->cs1); + /* + * I am not sure from the data sheet, but it seems burst length + * has to be 8 for the 16 bit data bus we use; + * so these values are for BL = 8 + */ + __raw_writel(0x33211530, &sdp->cfg1); + __raw_writel(0x56570000, &sdp->cfg2); + /* send PrechargeALL, REF and IREF remain cleared! */ + __raw_writel(0xE1462C02, &sdp->ctrl); + udelay(1); + /* refresh SDRAM twice */ + __raw_writel(0xE1462C04, &sdp->ctrl); + udelay(1); + __raw_writel(0xE1462C04, &sdp->ctrl); + /* init MR */ + __raw_writel(0x008D0000, &sdp->mode); + /* initialize EMR */ + __raw_writel(0x80010000, &sdp->mode); + /* wait until DLL is locked */ + udelay(1); + /* + * enable automatic refresh, lock mode register, + * clear iref and ipall + */ + __raw_writel(0x71462C00, &sdp->ctrl); + /* Dummy write to start SDRAM */ + writel(0, CONFIG_SYS_SDRAM_BASE); +#endif + + /* + * for get_ram_size() to work, both CS areas have to be + * configured, i.e. CS1 has to be explicitely disabled, else + * probing for memory will cause the SDRAM bus to hang! + * (Do not rely on the SDCS register(s) being set to 0x00000000 + * during reset as stated in the data sheet.) + */ + return get_ram_size((unsigned long *)CONFIG_SYS_SDRAM_BASE, + 0x80000000 - CONFIG_SYS_SDRAM_BASE); +} + +#define UART_BASE MMAP_UART0 +int rs_serial_init(int port, int baud) +{ + uart_t *uart; + u32 counter; + + switch (port) { + case 0: + uart = (uart_t *)(MMAP_UART0); + break; + case 1: + uart = (uart_t *)(MMAP_UART1); + break; + case 2: + uart = (uart_t *)(MMAP_UART2); + break; + default: + uart = (uart_t *)(MMAP_UART0); + } + + uart_port_conf(); + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + writeb(UART_UCR_RESET_RX, &uart->ucr); + writeb(UART_UCR_RESET_TX, &uart->ucr); + writeb(UART_UCR_RESET_ERROR, &uart->ucr); + writeb(UART_UCR_RESET_MR, &uart->ucr); + __asm__ ("nop"); + + writeb(0, &uart->uimr); + + /* write to CSR: RX/TX baud rate from timers */ + writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr); + + writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr); + writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr); + + /* Setting up BaudRate */ + counter = (u32) (gd->bus_clk / (baud)); + counter >>= 5; + + /* write to CTUR: divide counter upper byte */ + writeb((u8) ((counter & 0xff00) >> 8), &uart->ubg1); + /* write to CTLR: divide counter lower byte */ + writeb((u8) (counter & 0x00ff), &uart->ubg2); + + writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr); + + return 0; +} + +void astro_put_char(char ch) +{ + uart_t *uart; + unsigned long timer; + + uart = (uart_t *)(MMAP_UART0); + /* + * Wait for last character to go. Timeout of 6ms should + * be enough for our lowest baud rate of 2400. + */ + timer = get_timer(0); + while (get_timer(timer) < 6) { + if (readb(&uart->usr) & UART_USR_TXRDY) + break; + } + writeb(ch, &uart->utb); + + return; +} + +int astro_is_char(void) +{ + uart_t *uart; + + uart = (uart_t *)(MMAP_UART0); + return readb(&uart->usr) & UART_USR_RXRDY; +} + +int astro_get_char(void) +{ + uart_t *uart; + + uart = (uart_t *)(MMAP_UART0); + while (!(readb(&uart->usr) & UART_USR_RXRDY)) ; + return readb(&uart->urb); +} + +int misc_init_r(void) +{ + int retval = 0; + + puts("Configure Xilinx FPGA..."); + retval = astro5373l_xilinx_load(); + if (!retval) { + puts("failed!\n"); + return retval; + } + puts("done\n"); + + puts("Configure Altera FPGA..."); + retval = astro5373l_altera_load(); + if (!retval) { + puts("failed!\n"); + return retval; + } + puts("done\n"); + + return retval; +} diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds new file mode 100644 index 0000000..a9a4e0a --- /dev/null +++ b/board/astro/mcf5373l/u-boot.lds @@ -0,0 +1,142 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(m68k) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mcf532x/start.o (.text) + lib_m68k/traps.o (.text) + lib_m68k/interrupts.o (.text) + common/dlmalloc.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/env_embedded.o (.text) + + *(.text) +/* *(.fixup)*/ + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + + .reloc : + { + __got_start = .; + *(.got) + __got_end = .; + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + _sbss = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c index 6fb0096..3117b5f 100644 --- a/board/bc3450/bc3450.c +++ b/board/bc3450/bc3450.c @@ -104,7 +104,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -204,57 +203,6 @@ phys_size_t initdram (int board_type) return dramsize; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff; /* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { #if defined (CONFIG_TQM5200) @@ -276,10 +224,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } diff --git a/board/bc3450/mt48lc16m16a2-75.h b/board/bc3450/mt48lc16m16a2-75.h index 3f1e169..48b4321 100644 --- a/board/bc3450/mt48lc16m16a2-75.h +++ b/board/bc3450/mt48lc16m16a2-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 /* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */ @@ -33,15 +32,3 @@ /*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */ #define SDRAM_CONFIG2 0x8AD70000 /*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */ - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c index dce07bf..6ddc858 100644 --- a/board/canmb/canmb.c +++ b/board/canmb/canmb.c @@ -81,7 +81,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -183,57 +182,6 @@ phys_size_t initdram (int board_type) return dramsize + dramsize2; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { puts ("Board: CANMB\n"); diff --git a/board/canmb/mt48lc16m32s2-75.h b/board/canmb/mt48lc16m32s2-75.h index ffdf039..1547725 100644 --- a/board/canmb/mt48lc16m32s2-75.h +++ b/board/canmb/mt48lc16m32s2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c index ed668af..6385443 100644 --- a/board/davinci/da830evm/da830evm.c +++ b/board/davinci/da830evm/da830evm.c @@ -150,7 +150,7 @@ int board_init(void) DAVINCI_ABCR_RHOLD(0) | DAVINCI_ABCR_TA(2) | DAVINCI_ABCR_ASIZE_8BIT), - &davinci_emif_regs->AB2CR); + &davinci_emif_regs->ab2cr); #endif /* arch number of the board */ diff --git a/board/esd/cpci5200/mt46v16m16-75.h b/board/esd/cpci5200/mt46v16m16-75.h index 22d0a55..cf63806 100644 --- a/board/esd/cpci5200/mt46v16m16-75.h +++ b/board/esd/cpci5200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/esd/mecp5200/mt46v16m16-75.h b/board/esd/mecp5200/mt46v16m16-75.h index 22d0a55..cf63806 100644 --- a/board/esd/mecp5200/mt46v16m16-75.h +++ b/board/esd/mecp5200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/esd/pf5200/mt46v16m16-75.h b/board/esd/pf5200/mt46v16m16-75.h index 22d0a55..cf63806 100644 --- a/board/esd/pf5200/mt46v16m16-75.h +++ b/board/esd/pf5200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c index 5505cc4..446f102 100644 --- a/board/freescale/m5271evb/m5271evb.c +++ b/board/freescale/m5271evb/m5271evb.c @@ -47,6 +47,7 @@ phys_size_t initdram (int board_type) { MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS | MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE | MCF_GPIO_SDRAM_SDCS_11); + asm(" nop"); /* * Check to see if the SDRAM has already been initialized @@ -55,8 +56,9 @@ phys_size_t initdram (int board_type) { if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) { /* Initialize DRAM Control Register: DCR */ mbar_writeShort(MCF_SDRAMC_DCR, - MCF_SDRAMC_DCR_RTIM(0x01) - | MCF_SDRAMC_DCR_RC(0x30)); + MCF_SDRAMC_DCR_RTIM(2) + | MCF_SDRAMC_DCR_RC(0x2E)); + asm(" nop"); /* * Initialize DACR0 @@ -70,15 +72,18 @@ phys_size_t initdram (int board_type) { | MCF_SDRAMC_DACRn_CASL(1) | MCF_SDRAMC_DACRn_CBM(3) | MCF_SDRAMC_DACRn_PS(0)); + asm(" nop"); /* Initialize DMR0 */ mbar_writeLong(MCF_SDRAMC_DMR0, MCF_SDRAMC_DMRn_BAM_16M | MCF_SDRAMC_DMRn_V); + asm(" nop"); /* Set IP bit in DACR */ mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) | MCF_SDRAMC_DACRn_IP); + asm(" nop"); /* Wait at least 20ns to allow banks to precharge */ for (i = 0; i < 5; i++) @@ -86,6 +91,7 @@ phys_size_t initdram (int board_type) { /* Write to this block to initiate precharge */ *(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5; + asm(" nop"); /* Set RE bit in DACR */ mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) @@ -98,6 +104,7 @@ phys_size_t initdram (int board_type) { /* Finish the configuration by issuing the MRS */ mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) | MCF_SDRAMC_DACRn_MRS); + asm(" nop"); /* * Write to the SDRAM Mode Register A0-A11 = 0x400 @@ -109,6 +116,7 @@ phys_size_t initdram (int board_type) { * Burst Length = 1 */ *(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5; + asm(" nop"); } return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 293b5b0..2a84514 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -107,7 +107,7 @@ int ide_preinit(void) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_MASK) | 0x10; + gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10; gpio->par_feci2c |= (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | GPIO_PAR_FECI2C_MDIO1_ATA_DIOW); @@ -185,7 +185,7 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) info->flash_id = 0x01000000; info->portwidth = 1; info->chipwidth = 1; - info->buffer_size = 32; + info->buffer_size = 1; info->erase_blk_tout = 16384; info->write_tout = 2; info->buffer_write_tout = 5; diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 7524461..47b2195 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -134,7 +134,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -258,65 +257,12 @@ phys_size_t initdram (int board_type) return dramsize + dramsize2; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { #if defined (CONFIG_LITE5200B) puts ("Board: Freescale Lite5200B\n"); -#elif defined(CONFIG_MPC5200) +#else puts ("Board: Motorola MPC5200 (IceCube)\n"); -#elif defined(CONFIG_MGT5100) - puts ("Board: Motorola MGT5100 (IceCube)\n"); #endif return 0; } @@ -329,10 +275,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } diff --git a/board/icecube/mt46v16m16-75.h b/board/icecube/mt46v16m16-75.h index 4c0f9a7..eb85740 100644 --- a/board/icecube/mt46v16m16-75.h +++ b/board/icecube/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/icecube/mt46v32m16.h b/board/icecube/mt46v32m16.h index de2b48b..519bf6d 100644 --- a/board/icecube/mt46v32m16.h +++ b/board/icecube/mt46v32m16.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/icecube/mt48lc16m16a2-75.h b/board/icecube/mt48lc16m16a2-75.h index ffdf039..1547725 100644 --- a/board/icecube/mt48lc16m16a2-75.h +++ b/board/icecube/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index 6e752c6..967aabd 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -227,10 +227,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } @@ -248,10 +244,8 @@ void flash_afterinit(ulong size) *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_BOOTCS_START | size, size); } -#if defined(CONFIG_MPC5200) *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif } int update_flash_size (int flash_size) diff --git a/board/mcc200/mt46v16m16-75.h b/board/mcc200/mt46v16m16-75.h index f650faa..423febe 100644 --- a/board/mcc200/mt46v16m16-75.h +++ b/board/mcc200/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/mcc200/mt48lc16m16a2-75.h b/board/mcc200/mt48lc16m16a2-75.h index ffdf039..1547725 100644 --- a/board/mcc200/mt48lc16m16a2-75.h +++ b/board/mcc200/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/mcc200/mt48lc16m32s2-75.h b/board/mcc200/mt48lc16m32s2-75.h index ffdf039..1547725 100644 --- a/board/mcc200/mt48lc16m32s2-75.h +++ b/board/mcc200/mt48lc16m32s2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/munices/mt48lc16m16a2-75.h b/board/munices/mt48lc16m16a2-75.h index ffdf039..1547725 100644 --- a/board/munices/mt48lc16m16a2-75.h +++ b/board/munices/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/pm520/mt46v16m16-75.h b/board/pm520/mt46v16m16-75.h index f650faa..423febe 100644 --- a/board/pm520/mt46v16m16-75.h +++ b/board/pm520/mt46v16m16-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 1 /* is DDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x018D0000 #define SDRAM_EMODE 0x40090000 @@ -31,7 +30,3 @@ #define SDRAM_CONFIG1 0x73722930 #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/pm520/mt48lc16m16a2-75.h b/board/pm520/mt48lc16m16a2-75.h index ffdf039..1547725 100644 --- a/board/pm520/mt48lc16m16a2-75.h +++ b/board/pm520/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index 9da1041..d691434 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -84,7 +84,6 @@ static void sdram_start (int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) phys_size_t initdram (int board_type) { ulong dramsize = 0; @@ -186,64 +185,9 @@ phys_size_t initdram (int board_type) return dramsize + dramsize2; } -#elif defined(CONFIG_MGT5100) - -phys_size_t initdram (int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; - __asm__ volatile ("sync"); - - /* find RAM size */ - sdram_start(0); - test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif - int checkboard (void) { -#if defined(CONFIG_MPC5200) puts ("Board: MicroSys PM520 \n"); -#elif defined(CONFIG_MGT5100) - puts ("Board: MicroSys PM510 \n"); -#endif return 0; } @@ -255,10 +199,6 @@ void flash_preinit(void) * Note that CS_BOOT cannot be cleared when * executing in flash. */ -#if defined(CONFIG_MGT5100) - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -#endif *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } diff --git a/board/total5200/mt48lc16m16a2-75.h b/board/total5200/mt48lc16m16a2-75.h index 5b0923e..ae237c6 100644 --- a/board/total5200/mt48lc16m16a2-75.h +++ b/board/total5200/mt48lc16m16a2-75.h @@ -23,21 +23,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/total5200/mt48lc32m16a2-75.h b/board/total5200/mt48lc32m16a2-75.h index 4b5ac80..cb4b43d 100644 --- a/board/total5200/mt48lc32m16a2-75.h +++ b/board/total5200/mt48lc32m16a2-75.h @@ -28,13 +28,8 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x514F0000 #define SDRAM_CONFIG1 0xD2322800 #define SDRAM_CONFIG2 0x8AD70000 - -#else -#error CONFIG_MPC5200 is not defined -#endif diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c index dc4c6f1..d883eb6 100644 --- a/board/total5200/sdram.c +++ b/board/total5200/sdram.c @@ -76,7 +76,6 @@ static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr) * is something else than 0x00000000. */ -#if defined(CONFIG_MPC5200) long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) { ulong dramsize = 0; @@ -174,54 +173,3 @@ long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) return dramsize + dramsize2; } - -#elif defined(CONFIG_MGT5100) - -long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup and enable SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; - *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2; - - /* address select register */ - *(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel; - __asm__ volatile ("sync"); - - /* find RAM size */ - mpc5xxx_sdram_start(sdram_conf, 0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - mpc5xxx_sdram_start(sdram_conf, 1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - mpc5xxx_sdram_start(sdram_conf, 0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* set SDRAM end address according to size */ - *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); - -#else /* CONFIG_SYS_RAMBOOT */ - - /* Retrieve amount of SDRAM available */ - dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); - -#endif /* CONFIG_SYS_RAMBOOT */ - - return dramsize; -} - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/board/total5200/sdram.h b/board/total5200/sdram.h index bc21e1d..396a190 100644 --- a/board/total5200/sdram.h +++ b/board/total5200/sdram.h @@ -28,12 +28,7 @@ typedef struct { ulong control; ulong config1; ulong config2; -#if defined(CONFIG_MPC5200) ulong tapdelay; -#endif -#if defined(CONFIG_MGT5100) - ulong addrsel; -#endif } sdram_conf_t; long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf); diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c index c524d63..61b5b80 100644 --- a/board/total5200/total5200.c +++ b/board/total5200/total5200.c @@ -47,26 +47,17 @@ phys_size_t initdram (int board_type) sdram_conf.control = SDRAM_CONTROL; sdram_conf.config1 = SDRAM_CONFIG1; sdram_conf.config2 = SDRAM_CONFIG2; -#if defined(CONFIG_MPC5200) sdram_conf.tapdelay = 0; -#endif -#if defined(CONFIG_MGT5100) - sdram_conf.addrsel = SDRAM_ADDRSEL; -#endif return mpc5xxx_sdram_init (&sdram_conf); } int checkboard (void) { -#if defined(CONFIG_MPC5200) #if CONFIG_TOTAL5200_REV==2 puts ("Board: Total5200 Rev.2 "); #else puts ("Board: Total5200 "); #endif -#elif defined(CONFIG_MGT5100) - puts ("Board: Total5100 "); -#endif /* * Retrieve FPGA Revision. @@ -85,20 +76,6 @@ int checkboard (void) return 0; } -#if defined(CONFIG_MGT5100) -int board_early_init_r(void) -{ - /* - * Now, when we are in RAM, enable CS0 - * because CS_BOOT cannot be written. - */ - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ - - return 0; -} -#endif - #ifdef CONFIG_PCI static struct pci_controller hose; @@ -266,9 +243,7 @@ static const S1D_REGS init_regs [] = void video_get_info_str (int line_number, char *info) { if (line_number == 1) { -#ifdef CONFIG_MGT5100 - strcpy (info, " Total5100"); -#elif CONFIG_TOTAL5200_REV==1 +#if CONFIG_TOTAL5200_REV==1 strcpy (info, " Total5200"); #elif CONFIG_TOTAL5200_REV==2 strcpy (info, " Total5200 Rev.2"); diff --git a/board/tqc/tqm5200/mt48lc16m16a2-75.h b/board/tqc/tqm5200/mt48lc16m16a2-75.h index 3f1e169..48b4321 100644 --- a/board/tqc/tqm5200/mt48lc16m16a2-75.h +++ b/board/tqc/tqm5200/mt48lc16m16a2-75.h @@ -23,7 +23,6 @@ #define SDRAM_DDR 0 /* is SDR */ -#if defined(CONFIG_MPC5200) /* Settings for XLB = 132 MHz */ #define SDRAM_MODE 0x00CD0000 /* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */ @@ -33,15 +32,3 @@ /*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */ #define SDRAM_CONFIG2 0x8AD70000 /*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */ - -#elif defined(CONFIG_MGT5100) -/* Settings for XLB = 66 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xC2222600 -#define SDRAM_CONFIG2 0x88B70004 -#define SDRAM_ADDRSEL 0x02000000 - -#else -#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined -#endif diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index f8400bc..d22eb66 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; static void print_num(const char *, ulong); -#if !defined(CONFIG_ARM) || defined(CONFIG_CMD_NET) +#if !(defined(CONFIG_ARM) || defined(CONFIG_M68K)) || defined(CONFIG_CMD_NET) static void print_eth(int idx); #endif @@ -350,7 +350,7 @@ static void print_num(const char *name, ulong value) printf ("%-12s= 0x%08lX\n", name, value); } -#if !defined(CONFIG_ARM) || defined(CONFIG_CMD_NET) +#if !(defined(CONFIG_ARM) || defined(CONFIG_M68K)) || defined(CONFIG_CMD_NET) static void print_eth(int idx) { char name[10], *val; diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 23ab0c4..827d542 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -462,7 +462,7 @@ static int bootm_start_standalone(ulong iflag, int argc, char *argv[]) /* we overload the cmd field with our state machine info instead of a * function pointer */ -cmd_tbl_t cmd_bootm_sub[] = { +static cmd_tbl_t cmd_bootm_sub[] = { U_BOOT_CMD_MKENT(start, 0, 1, (void *)BOOTM_STATE_START, "", ""), U_BOOT_CMD_MKENT(loados, 0, 1, (void *)BOOTM_STATE_LOADOS, "", ""), #if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC) diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 62cbd33..ee9577c 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -154,6 +154,63 @@ int i2c_set_bus_speed(unsigned int) */ #define DISP_LINE_LEN 16 +/* + * Syntax: + * i2c read {i2c_chip} {devaddr}{.0, .1, .2} {len} {memaddr} + */ + +int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u_char chip; + uint devaddr, alen, length; + u_char *memaddr; + int j; + + if (argc != 5) { + cmd_usage(cmdtp); + return 1; + } + + /* + * I2C chip address + */ + chip = simple_strtoul(argv[1], NULL, 16); + + /* + * I2C data address within the chip. This can be 1 or + * 2 bytes long. Some day it might be 3 bytes long :-). + */ + devaddr = simple_strtoul(argv[2], NULL, 16); + alen = 1; + for (j = 0; j < 8; j++) { + if (argv[2][j] == '.') { + alen = argv[2][j+1] - '0'; + if (alen > 3) { + cmd_usage(cmdtp); + return 1; + } + break; + } else if (argv[2][j] == '\0') + break; + } + + /* + * Length is the number of objects, not number of bytes. + */ + length = simple_strtoul(argv[3], NULL, 16); + + /* + * memaddr is the address where to store things in memory + */ + memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16); + + if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) { + puts ("Error reading the chip.\n"); + return 1; + } + return 0; +} + int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { u_char chip; @@ -193,7 +250,7 @@ int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; - if (alen > 4) { + if (alen > 3) { cmd_usage(cmdtp); return 1; } @@ -287,7 +344,7 @@ int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; - if (alen > 4) { + if (alen > 3) { cmd_usage(cmdtp); return 1; } @@ -361,7 +418,7 @@ int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; - if (alen > 4) { + if (alen > 3) { cmd_usage(cmdtp); return 1; } @@ -451,7 +508,7 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]) for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; - if (alen > 4) { + if (alen > 3) { cmd_usage(cmdtp); return 1; } @@ -607,7 +664,7 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) for (j = 0; j < 8; j++) { if (argv[2][j] == '.') { alen = argv[2][j+1] - '0'; - if (alen > 4) { + if (alen > 3) { cmd_usage(cmdtp); return 1; } @@ -1242,46 +1299,60 @@ int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return ret; } -int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +int do_i2c_mm(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - /* Strip off leading 'i2c' command argument */ - argc--; - argv++; + return mod_i2c_mem (cmdtp, 1, flag, argc, argv); +} + +int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + return mod_i2c_mem (cmdtp, 0, flag, argc, argv); +} + +int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + return 0; +} +static cmd_tbl_t cmd_i2c_sub[] = { #if defined(CONFIG_I2C_MUX) - if (!strncmp(argv[0], "bu", 2)) - return do_i2c_add_bus(cmdtp, flag, argc, argv); + U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""), #endif /* CONFIG_I2C_MUX */ - if (!strncmp(argv[0], "sp", 2)) - return do_i2c_bus_speed(cmdtp, flag, argc, argv); + U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""), #if defined(CONFIG_I2C_MULTI_BUS) - if (!strncmp(argv[0], "de", 2)) - return do_i2c_bus_num(cmdtp, flag, argc, argv); + U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""), #endif /* CONFIG_I2C_MULTI_BUS */ - if (!strncmp(argv[0], "md", 2)) - return do_i2c_md(cmdtp, flag, argc, argv); - if (!strncmp(argv[0], "mm", 2)) - return mod_i2c_mem (cmdtp, 1, flag, argc, argv); - if (!strncmp(argv[0], "mw", 2)) - return do_i2c_mw(cmdtp, flag, argc, argv); - if (!strncmp(argv[0], "nm", 2)) - return mod_i2c_mem (cmdtp, 0, flag, argc, argv); - if (!strncmp(argv[0], "cr", 2)) - return do_i2c_crc(cmdtp, flag, argc, argv); - if (!strncmp(argv[0], "pr", 2)) - return do_i2c_probe(cmdtp, flag, argc, argv); - if (!strncmp(argv[0], "re", 2)) { - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - return 0; - } - if (!strncmp(argv[0], "lo", 2)) - return do_i2c_loop(cmdtp, flag, argc, argv); + U_BOOT_CMD_MKENT(loop, 3, 1, do_i2c_loop, "", ""), + U_BOOT_CMD_MKENT(md, 3, 1, do_i2c_md, "", ""), + U_BOOT_CMD_MKENT(mm, 2, 1, do_i2c_mm, "", ""), + U_BOOT_CMD_MKENT(mw, 3, 1, do_i2c_mw, "", ""), + U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""), + U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""), + U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""), + U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""), #if defined(CONFIG_CMD_SDRAM) - if (!strncmp(argv[0], "sd", 2)) - return do_sdram(cmdtp, flag, argc, argv); + U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""), #endif - cmd_usage(cmdtp); - return 0; + U_BOOT_CMD_MKENT(speed, 1, 1, do_i2c_bus_speed, "", ""), +}; + +int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + cmd_tbl_t *c; + + /* Strip off leading 'i2c' command argument */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], &cmd_i2c_sub[0], ARRAY_SIZE(cmd_i2c_sub)); + + if (c) { + return c->cmd(cmdtp, flag, argc, argv); + } else { + cmd_usage(cmdtp); + return 1; + } } /***************************************************/ @@ -1289,29 +1360,28 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( i2c, 6, 1, do_i2c, "I2C sub-system", - "speed [speed] - show or set I2C bus speed\n" #if defined(CONFIG_I2C_MUX) - "i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\n" + "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c " #endif /* CONFIG_I2C_MUX */ + "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" #if defined(CONFIG_I2C_MULTI_BUS) "i2c dev [dev] - show or set current I2C bus\n" #endif /* CONFIG_I2C_MULTI_BUS */ + "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n" "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n" "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" - "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" "i2c probe - show devices on the I2C bus\n" + "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n" "i2c reset - re-init the I2C Controller\n" - "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device" #if defined(CONFIG_CMD_SDRAM) - "\n" - "i2c sdram chip - print SDRAM configuration information" + "i2c sdram chip - print SDRAM configuration information\n" #endif + "i2c speed [speed] - show or set I2C bus speed" ); #if defined(CONFIG_I2C_MUX) - int i2c_mux_add_device(I2C_MUX_DEVICE *dev) { I2C_MUX_DEVICE *devtmp = i2c_mux_devices; diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 20fed2a..0b5f747 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -776,7 +776,7 @@ static int device_del(struct mtd_device *dev) * @param num device number * @return NULL if requested device does not exist */ -static struct mtd_device* device_find(u8 type, u8 num) +struct mtd_device *device_find(u8 type, u8 num) { struct list_head *entry; struct mtd_device *dev_tmp; diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 075a8af..9b0c930 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -327,8 +327,14 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) "are sure of what you are doing!\n" "\nReally scrub this NAND flash? \n"); - if (getc() == 'y' && getc() == '\r') { - opts.scrub = 1; + if (getc() == 'y') { + puts("y"); + if (getc() == '\r') + opts.scrub = 1; + else { + puts("scrub aborted\n"); + return -1; + } } else { puts("scrub aborted\n"); return -1; diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index f8b5d4d..2d37197 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -28,10 +28,33 @@ #include #include +static ulong get_arg(char *s, int w) +{ + ulong *p; + + /* + * if the parameter starts with a '*' then assume + * it is a pointer to the value we want + */ + + if (s[0] == '*') { + p = (ulong *)simple_strtoul(&s[1], NULL, 16); + switch (w) { + case 1: return((ulong)(*(uchar *)p)); + case 2: return((ulong)(*(ushort *)p)); + case 4: + default: return(*p); + } + } else { + return simple_strtoul(s, NULL, 16); + } +} + int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { ulong a, b; char buf[16]; + int w; /* Validate arguments */ if ((argc != 5) || (strlen(argv[3]) != 1)) { @@ -39,8 +62,10 @@ int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } - a = simple_strtoul(argv[2], NULL, 16); - b = simple_strtoul(argv[4], NULL, 16); + w = cmd_get_data_size(argv[0], 4); + + a = get_arg(argv[2], w); + b = get_arg(argv[4], w); switch (argv[3][0]) { case '|': sprintf(buf, "%lx", (a | b)); break; @@ -64,7 +89,8 @@ int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setexpr, 5, 0, do_setexpr, "set environment variable as the result of eval expression", - "name value1 value2\n" + "[.b, .w, .l] name value1 value2\n" " - set environment variable 'name' to the result of the evaluated\n" - " express specified by . can be &, |, ^, +, -, *, /, %" + " express specified by . can be &, |, ^, +, -, *, /, %\n" + " size argument is only meaningful if value1 and/or value2 are memory addresses" ); diff --git a/common/fdt_support.c b/common/fdt_support.c index f89a3ee..b7d4fe5 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -757,3 +757,222 @@ int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size) return -1; } #endif + +#ifdef CONFIG_FDT_FIXUP_PARTITIONS +#include +#include + +struct reg_cell { + unsigned int r0; + unsigned int r1; +}; + +int fdt_del_subnodes(const void *blob, int parent_offset) +{ + int off, ndepth; + int ret; + + for (ndepth = 0, off = fdt_next_node(blob, parent_offset, &ndepth); + (off >= 0) && (ndepth > 0); + off = fdt_next_node(blob, off, &ndepth)) { + if (ndepth == 1) { + debug("delete %s: offset: %x\n", + fdt_get_name(blob, off, 0), off); + ret = fdt_del_node((void *)blob, off); + if (ret < 0) { + printf("Can't delete node: %s\n", + fdt_strerror(ret)); + return ret; + } else { + ndepth = 0; + off = parent_offset; + } + } + } + return 0; +} + +int fdt_increase_size(void *fdt, int add_len) +{ + int newlen; + + newlen = fdt_totalsize(fdt) + add_len; + + /* Open in place with a new len */ + return fdt_open_into(fdt, fdt, newlen); +} + +int fdt_del_partitions(void *blob, int parent_offset) +{ + const void *prop; + int ndepth = 0; + int off; + int ret; + + off = fdt_next_node(blob, parent_offset, &ndepth); + if (off > 0 && ndepth == 1) { + prop = fdt_getprop(blob, off, "label", NULL); + if (prop == NULL) { + /* + * Could not find label property, nand {}; node? + * Check subnode, delete partitions there if any. + */ + return fdt_del_partitions(blob, off); + } else { + ret = fdt_del_subnodes(blob, parent_offset); + if (ret < 0) { + printf("Can't remove subnodes: %s\n", + fdt_strerror(ret)); + return ret; + } + } + } + return 0; +} + +int fdt_node_set_part_info(void *blob, int parent_offset, + struct mtd_device *dev) +{ + struct list_head *pentry; + struct part_info *part; + struct reg_cell cell; + int off, ndepth = 0; + int part_num, ret; + char buf[64]; + + ret = fdt_del_partitions(blob, parent_offset); + if (ret < 0) + return ret; + + /* + * Check if it is nand {}; subnode, adjust + * the offset in this case + */ + off = fdt_next_node(blob, parent_offset, &ndepth); + if (off > 0 && ndepth == 1) + parent_offset = off; + + part_num = 0; + list_for_each_prev(pentry, &dev->parts) { + int newoff; + + part = list_entry(pentry, struct part_info, link); + + debug("%2d: %-20s0x%08x\t0x%08x\t%d\n", + part_num, part->name, part->size, + part->offset, part->mask_flags); + + sprintf(buf, "partition@%x", part->offset); +add_sub: + ret = fdt_add_subnode(blob, parent_offset, buf); + if (ret == -FDT_ERR_NOSPACE) { + ret = fdt_increase_size(blob, 512); + if (!ret) + goto add_sub; + else + goto err_size; + } else if (ret < 0) { + printf("Can't add partition node: %s\n", + fdt_strerror(ret)); + return ret; + } + newoff = ret; + + /* Check MTD_WRITEABLE_CMD flag */ + if (part->mask_flags & 1) { +add_ro: + ret = fdt_setprop(blob, newoff, "read_only", NULL, 0); + if (ret == -FDT_ERR_NOSPACE) { + ret = fdt_increase_size(blob, 512); + if (!ret) + goto add_ro; + else + goto err_size; + } else if (ret < 0) + goto err_prop; + } + + cell.r0 = cpu_to_fdt32(part->offset); + cell.r1 = cpu_to_fdt32(part->size); +add_reg: + ret = fdt_setprop(blob, newoff, "reg", &cell, sizeof(cell)); + if (ret == -FDT_ERR_NOSPACE) { + ret = fdt_increase_size(blob, 512); + if (!ret) + goto add_reg; + else + goto err_size; + } else if (ret < 0) + goto err_prop; + +add_label: + ret = fdt_setprop_string(blob, newoff, "label", part->name); + if (ret == -FDT_ERR_NOSPACE) { + ret = fdt_increase_size(blob, 512); + if (!ret) + goto add_label; + else + goto err_size; + } else if (ret < 0) + goto err_prop; + + part_num++; + } + return 0; +err_size: + printf("Can't increase blob size: %s\n", fdt_strerror(ret)); + return ret; +err_prop: + printf("Can't add property: %s\n", fdt_strerror(ret)); + return ret; +} + +/* + * Update partitions in nor/nand nodes using info from + * mtdparts environment variable. The nodes to update are + * specified by node_info structure which contains mtd device + * type and compatible string: E. g. the board code in + * ft_board_setup() could use: + * + * struct node_info nodes[] = { + * { "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, }, + * { "cfi-flash", MTD_DEV_TYPE_NOR, }, + * }; + * + * fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); + */ +void fdt_fixup_mtdparts(void *blob, void *node_info, int node_info_size) +{ + struct node_info *ni = node_info; + struct mtd_device *dev; + char *parts; + int i, idx; + int noff; + + parts = getenv("mtdparts"); + if (!parts) + return; + + if (mtdparts_init() != 0) + return; + + for (i = 0; i < node_info_size; i++) { + idx = 0; + noff = fdt_node_offset_by_compatible(blob, -1, ni[i].compat); + while (noff != -FDT_ERR_NOTFOUND) { + debug("%s: %s, mtd dev type %d\n", + fdt_get_name(blob, noff, 0), + ni[i].compat, ni[i].type); + dev = device_find(ni[i].type, idx++); + if (dev) { + if (fdt_node_set_part_info(blob, noff, dev)) + return; /* return on error */ + } + + /* Jump to next flash node */ + noff = fdt_node_offset_by_compatible(blob, noff, + ni[i].compat); + } + } +} +#endif diff --git a/common/main.c b/common/main.c index c860b0b..3949a5b 100644 --- a/common/main.c +++ b/common/main.c @@ -68,7 +68,7 @@ static int abortboot(int); #undef DEBUG_PARSER -char console_buffer[CONFIG_SYS_CBSIZE]; /* console I/O buffer */ +char console_buffer[CONFIG_SYS_CBSIZE + 1]; /* console I/O buffer */ static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen); static char erase_seq[] = "\b \b"; /* erase sequence */ @@ -526,7 +526,7 @@ void reset_cmd_timeout(void) #define CTL_CH(c) ((c) - 'a' + 1) -#define MAX_CMDBUF_SIZE 256 +#define MAX_CMDBUF_SIZE CONFIG_SYS_CBSIZE #define CTL_BACKSPACE ('\b') #define DEL ((char)255) @@ -546,7 +546,7 @@ static int hist_cur = -1; unsigned hist_num = 0; char* hist_list[HIST_MAX]; -char hist_lines[HIST_MAX][HIST_SIZE]; +char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */ #define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1) diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c index e160ee1..beb78f5 100644 --- a/cpu/mcf5227x/cpu_init.c +++ b/cpu/mcf5227x/cpu_init.c @@ -125,27 +125,27 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_uart &= - (GPIO_PAR_UART_U0TXD_MASK & GPIO_PAR_UART_U0RXD_MASK); + (GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK); gpio->par_uart |= (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); break; case 1: gpio->par_uart &= - (GPIO_PAR_UART_U1TXD_MASK & GPIO_PAR_UART_U1RXD_MASK); + (GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK); gpio->par_uart |= (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); break; case 2: gpio->par_dspi &= - (GPIO_PAR_DSPI_SIN_MASK & GPIO_PAR_DSPI_SOUT_MASK); + (GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK); gpio->par_dspi = (GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD); break; @@ -175,11 +175,11 @@ int cfspi_claim_bus(uint bus, uint cs) switch (cs) { case 0: - gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_MASK; + gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_UNMASK; gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0; break; case 2: - gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK; + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK; gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2; break; } @@ -199,7 +199,7 @@ void cfspi_release_bus(uint bus, uint cs) gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0; break; case 2: - gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK; + gpio->par_timer &= GPIO_PAR_TIMER_T2IN_UNMASK; break; } } diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S index 0c9c89c..30428f1 100644 --- a/cpu/mcf5227x/start.S +++ b/cpu/mcf5227x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) - #define _START _start #define _FAULT _fault @@ -378,21 +374,19 @@ _start: movec %d0, %RAMBAR1 #endif + /* invalidate and disable cache */ + move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + /* initialize general use internal ram */ move.l #0, %d0 move.l #(ICACHE_STATUS), %a1 /* icache */ move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l #(CACR_STATUS), %a3 /* CACR */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) - - /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0, %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ @@ -510,84 +504,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01200000, %d0 /* Invalid cache */ - movec %d0, %CACR - - move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 - movec %d0, %ACR0 - - move.l #0x81600610, %d0 /* Enable cache */ - movec %d0, %CACR - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x01F00000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - clr.l %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x80600610, %d0 /* Invalidate icache */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #0x01200000, %d0 /* Invalid cache */ - movec %d0, %CACR - - move.l #0x81300610, %d0 - movec %d0, %CACR - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #0x81600610, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_invalid -dcache_invalid: - move.l #0x81100610, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - -/*------------------------------------------------------------------------------*/ .globl version_string version_string: diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index 3c04fd4..0f299f0 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -130,21 +130,32 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart &= ~(GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); + gpio->par_uart |= (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD); break; case 1: - gpio->par_uart = - (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); + gpio->par_uart &= + ~(GPIO_PAR_UART_U1RXD_MASK | GPIO_PAR_UART_U1TXD_MASK); + gpio->par_uart |= + (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD); break; case 2: - gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#ifdef CONFIG_SYS_UART2_PRI_GPIO + gpio->par_uart &= ~(GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); + gpio->par_uart |= (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->feci2c &= + ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); + gpio->feci2c |= + (GPIO_PAR_FECI2C_EMDC_U2TXD | GPIO_PAR_FECI2C_EMDIO_U2RXD); +#endif break; } } @@ -156,7 +167,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear) if (setclear) { gpio->par_feci2c |= - (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO); + (GPIO_PAR_FECI2C_EMDC_FECEMDC | + GPIO_PAR_FECI2C_EMDIO_FECEMDIO); } else { gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK); diff --git a/cpu/mcf523x/start.S b/cpu/mcf523x/start.S index d44da37..20b50e7 100644 --- a/cpu/mcf523x/start.S +++ b/cpu/mcf523x/start.S @@ -24,6 +24,7 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" @@ -135,7 +136,7 @@ _start: movec %d0, %RAMBAR1 /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ + move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ nop move.l #0, %d0 @@ -144,8 +145,8 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ move.l %d0, (%a1) move.l %d0, (%a2) @@ -265,74 +266,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - nop - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #(CONFIG_SYS_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - - move.l #0x80400100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x80600100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - rts - - .globl dcache_enable -dcache_enable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - /* No dcache, just a dummy function */ - .globl dcache_disable -dcache_disable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - move.l (%a1), %d0 - rts - -/*------------------------------------------------------------------------------*/ .globl version_string version_string: diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 7cea655..170bbfc 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -5,6 +5,8 @@ * MCF5282 additionals * (C) Copyright 2005 * BuS Elektronik GmbH & Co. KG + * (c) Copyright 2010 + * Arcturus Networks Inc. * * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) @@ -133,36 +135,36 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart &= GPIO_PAR_UART0_MASK; + gpio->par_uart &= GPIO_PAR_UART0_UNMASK; gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); break; case 1: - gpio->par_uart &= GPIO_PAR_UART0_MASK; + gpio->par_uart &= GPIO_PAR_UART0_UNMASK; gpio->par_uart |= (GPIO_PAR_UART_U1TXD | GPIO_PAR_UART_U1RXD); break; case 2: #ifdef CONFIG_SYS_UART2_PRI_GPIO gpio->par_timer &= - (GPIO_PAR_TMR_TIN0_MASK | GPIO_PAR_TMR_TIN1_MASK); + (GPIO_PAR_TMR_TIN0_UNMASK | GPIO_PAR_TMR_TIN1_UNMASK); gpio->par_timer |= (GPIO_PAR_TMR_TIN0_U2TXD | GPIO_PAR_TMR_TIN1_U2RXD); #endif #ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_feci2c &= - (GPIO_PAR_FECI2C_MDC_MASK | GPIO_PAR_FECI2C_MDIO_MASK); + (GPIO_PAR_FECI2C_MDC_UNMASK | GPIO_PAR_FECI2C_MDIO_UNMASK); gpio->par_feci2c |= (GPIO_PAR_FECI2C_MDC_U2TXD | GPIO_PAR_FECI2C_MDIO_U2RXD); #endif #ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_feci2c &= - (GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK); + (GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK); gpio->par_feci2c |= (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD); #endif @@ -182,8 +184,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear) GPIO_PAR_FECI2C_MDC_MDC | GPIO_PAR_FECI2C_MDIO_MDIO; } else { gpio->par_fec &= - (GPIO_PAR_FEC_7W_MASK & GPIO_PAR_FEC_MII_MASK); - gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_MASK; + (GPIO_PAR_FEC_7W_UNMASK & GPIO_PAR_FEC_MII_UNMASK); + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII_UNMASK; } return 0; } @@ -245,15 +247,19 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { + volatile u32 *par = (u32 *) MMAP_PAR; + /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { - case 0: - break; + switch (port) { case 1: + *par &= 0xFFE7FFFF; + *par |= 0x00180000; break; case 2: + *par &= 0xFFFFFFFC; + *par &= 0x00000003; break; } } @@ -289,21 +295,26 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { + u16 temp; + /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | - MCF_GPIO_PAR_UART_U0RXD); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xFFF3; + temp |= (MCF_GPIO_PAR_UART_U0TXD | MCF_GPIO_PAR_UART_U0RXD); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; case 1: - mbar_writeShort(MCF_GPIO_PAR_UART, - MCF_GPIO_PAR_UART_U1RXD_UART1 | - MCF_GPIO_PAR_UART_U1TXD_UART1); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xF0FF; + temp |= (MCF_GPIO_PAR_UART_U1RXD_UART1 | MCF_GPIO_PAR_UART_U1TXD_UART1); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; case 2: - mbar_writeShort(MCF_GPIO_PAR_UART, 0x3000); + temp = mbar_readShort(MCF_GPIO_PAR_UART) & 0xCFFF; + temp |= (0x3000); + mbar_writeShort(MCF_GPIO_PAR_UART, temp); break; } } @@ -407,12 +418,12 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK); gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD); @@ -485,19 +496,22 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: + gpio->par_uart &= ~UART0_ENABLE_MASK; gpio->par_uart |= UART0_ENABLE_MASK; break; case 1: + gpio->par_uart &= ~UART1_ENABLE_MASK; gpio->par_uart |= UART1_ENABLE_MASK; break; case 2: + gpio->par_uart &= ~UART2_ENABLE_MASK; gpio->par_uart |= UART2_ENABLE_MASK; break; } @@ -582,6 +596,12 @@ void cpu_init_f(void) #ifdef CONFIG_SYS_PTCPAR MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR; #endif +#if defined(CONFIG_SYS_PORTTC) + MCFGPIO_PORTTC = CONFIG_SYS_PORTTC; +#endif +#if defined(CONFIG_SYS_DDRTC) + MCFGPIO_DDRTC = CONFIG_SYS_DDRTC; +#endif #ifdef CONFIG_SYS_PTDPAR MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR; #endif @@ -589,6 +609,9 @@ void cpu_init_f(void) MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR; #endif +#if defined(CONFIG_SYS_DDRD) + MCFGPIO_DDRD = CONFIG_SYS_DDRD; +#endif #ifdef CONFIG_SYS_DDRUA MCFGPIO_DDRUA = CONFIG_SYS_DDRUA; #endif @@ -610,10 +633,10 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: MCFGPIO_PUAPAR &= 0xFc; MCFGPIO_PUAPAR |= 0x03; @@ -718,14 +741,7 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { - /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { - case 0: - break; - case 1: - break; - } } #endif /* #if defined(CONFIG_M5249) */ diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 0dd4de5..9ef206a 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -24,12 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif - #define _START _start #define _FAULT _fault @@ -201,6 +201,13 @@ _after_flashbar_copy: movec %d0, %RAMBAR1 #endif + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- @@ -283,23 +290,6 @@ clear_bss: cmp.l %a2, %a1 bne 7b -#if defined(CONFIG_M5281) || defined(CONFIG_M5282) - /* patch the 3 accesspoints to 3 ichache_state */ - /* quick and dirty */ - - move.l %a0,%d1 - add.l #(icache_state - CONFIG_SYS_MONITOR_BASE),%d1 - move.l %a0,%a1 - add.l #(icache_state_access_1+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) - move.l %a0,%a1 - add.l #(icache_state_access_2+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) - move.l %a0,%a1 - add.l #(icache_state_access_3+2 - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %d1,(%a1) -#endif - /* calculate relative jump to board_init_r in ram */ move.l %a0, %a1 add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 @@ -336,156 +326,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ -#ifdef CONFIG_M5208 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts -#endif - -#ifdef CONFIG_M5271 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts -#endif - -#ifdef CONFIG_M5272 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - -#if defined(CONFIG_M5275) -/* - * Instruction cache only - */ - .globl icache_enable -icache_enable: - move.l #0x01400000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup SDRAM caching */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0x00000000, %d0 /* No other caching */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80400100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - -#ifdef CONFIG_M5282 - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80400100, %d0 /* Setup cache mask, data cache disabel*/ - movec %d0, %CACR /* Enable cache */ - moveq #1, %d0 -icache_state_access_1: - move.l %d0, icache_state - rts -#endif - -#if defined(CONFIG_M5249) || defined(CONFIG_M5253) - .globl icache_enable -icache_enable: - /* - * Note: The 5249 Documentation doesn't give a bit position for CINV! - * From the 5272 and the 5307 documentation, I have deduced that it is - * probably CACR[24]. Should someone say something to Motorola? - * ~Jeremy - */ - move.l #0x01000000, %d0 /* Invalidate whole cache */ - move.c %d0,%CACR - move.l #0xff00c000, %d0 /* Set FLASH cachable: always match (SM=0b10) */ - move.c %d0, %ACR0 - move.l #0x0000c000, %d0 /* Set SDRAM cachable: always match (SM=0b10) */ - move.c %d0, %ACR1 - move.l #0x90000200, %d0 /* Set cache enable cmd */ - move.c %d0,%CACR - moveq #1, %d0 - move.l %d0, icache_state - rts -#endif - - .globl icache_disable -icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - movec %d0, %ACR1 /* Enable cache */ - moveq #0, %d0 -icache_state_access_2: - move.l %d0, icache_state - rts - - .globl icache_status -icache_status: -icache_state_access_3: - move.l #(icache_state), %a0 - move.l (%a0), %d0 - rts - - .data -icache_state: - .long 0 /* cache is diabled on inirialization */ - - .globl dcache_enable -dcache_enable: - /* dummy function */ - rts - - .globl dcache_disable -dcache_disable: - /* dummy function */ - rts - - .globl dcache_status -dcache_status: - /* dummy function */ - rts - -/*------------------------------------------------------------------------------*/ .globl version_string version_string: diff --git a/cpu/mcf532x/config.mk b/cpu/mcf532x/config.mk index 0cb90ac..b783444 100644 --- a/cpu/mcf532x/config.mk +++ b/cpu/mcf532x/config.mk @@ -24,8 +24,20 @@ # PLATFORM_RELFLAGS += -ffixed-d7 -msep-data + +cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is5301x:=$(shell grep CONFIG_MCF5301x $(TOPDIR)/include/$(cfg)) +is532x:=$(shell grep CONFIG_MCF532x $(TOPDIR)/include/$(cfg)) + ifneq ($(findstring 4.1,$(shell $(CC) --version)),4.1) + +ifneq (,$(findstring CONFIG_MCF5301x,$(is5301x))) +PLATFORM_CPPFLAGS += -mcpu=53015 -fPIC +endif +ifneq (,$(findstring CONFIG_MCF532x,$(is532x))) PLATFORM_CPPFLAGS += -mcpu=5329 -fPIC +endif + else PLATFORM_CPPFLAGS += -m5307 -fPIC endif diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c index 4f1695c..6f551b6 100644 --- a/cpu/mcf532x/cpu_init.c +++ b/cpu/mcf532x/cpu_init.c @@ -133,24 +133,26 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + gpio->par_uart &= ~(GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); + gpio->par_uart |= (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD); break; case 1: #ifdef CONFIG_SYS_UART1_ALT1_GPIO gpio->par_simp1h &= - ~(GPIO_PAR_SIMP1H_DATA1_MASK | GPIO_PAR_SIMP1H_VEN1_MASK); + ~(GPIO_PAR_SIMP1H_DATA1_UNMASK | + GPIO_PAR_SIMP1H_VEN1_UNMASK); gpio->par_simp1h |= (GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD); #elif defined(CONFIG_SYS_UART1_ALT2_GPIO) gpio->par_ssih &= - ~(GPIO_PAR_SSIH_RXD_MASK | GPIO_PAR_SSIH_TXD_MASK); + ~(GPIO_PAR_SSIH_RXD_UNMASK | GPIO_PAR_SSIH_TXD_UNMASK); gpio->par_ssih |= (GPIO_PAR_SSIH_RXD_U1RXD | GPIO_PAR_SSIH_TXD_U1TXD); #endif @@ -160,12 +162,12 @@ void uart_port_conf(void) gpio->par_uart |= (GPIO_PAR_UART_U2TXD | GPIO_PAR_UART_U2RXD); #elif defined(CONFIG_SYS_UART2_ALT1_GPIO) gpio->par_dspih &= - ~(GPIO_PAR_DSPIH_SIN_MASK | GPIO_PAR_DSPIH_SOUT_MASK); + ~(GPIO_PAR_DSPIH_SIN_UNMASK | GPIO_PAR_DSPIH_SOUT_UNMASK); gpio->par_dspih |= (GPIO_PAR_DSPIH_SIN_U2RXD | GPIO_PAR_DSPIH_SOUT_U2TXD); #elif defined(CONFIG_SYS_UART2_ALT2_GPIO) gpio->par_feci2c &= - ~(GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK); + ~(GPIO_PAR_FECI2C_SDA_UNMASK | GPIO_PAR_FECI2C_SCL_UNMASK); gpio->par_feci2c |= (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD); #endif @@ -195,11 +197,11 @@ int fecpin_setclear(struct eth_device *dev, int setclear) if (info->iobase == CONFIG_SYS_FEC0_IOBASE) { gpio->par_fec &= ~(GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC); - gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_MASK; + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_UNMASK; } else { gpio->par_fec &= ~(GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC); - gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_MASK; + gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_UNMASK; } } return 0; @@ -297,22 +299,33 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + gpio->par_uart &= ~(GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + gpio->par_uart |= (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); break; case 1: - gpio->par_uart = + gpio->par_uart &= + ~(GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); + gpio->par_uart |= (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); break; case 2: +#ifdef CONFIG_SYS_UART2_ALT1_GPIO gpio->par_timer &= 0x0F; gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) + gpio->par_feci2c &= 0xFF00; + gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_UTXD2 | GPIO_PAR_FECI2C_SDA_URXD2); +#elif defined(CONFIG_SYS_UART2_ALT3_GPIO) + gpio->par_ssi &= 0xF0FF; + gpio->par_ssi |= (GPIO_PAR_SSI_RXD(2) | GPIO_PAR_SSI_TXD(2)); +#endif break; } } diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index 67f08c7..5a29e25 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -229,7 +229,7 @@ int clock_pll(int fsys, int flags) PLL_PDR_OUTDIV3((BUSDIV / 2) - 1) | PLL_PDR_OUTDIV4(USBDIV - 1); - pll->pcr &= PLL_PCR_FBDIV_MASK; + pll->pcr &= PLL_PCR_FBDIV_UNMASK; pll->pcr |= PLL_PCR_FBDIV(mfd - 1); #endif #ifdef CONFIG_MCF532x diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 5b134aa..a80b0a9 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -27,6 +27,7 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" @@ -142,7 +143,7 @@ _start: movec %d0, %RAMBAR1 /* invalidate and disable cache */ - move.l #0x01000000, %d0 /* Invalidate cache cmd */ + move.l #CF_CACR_CINVA, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -158,8 +159,8 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a2 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* icache */ move.l %d0, (%a1) move.l %d0, (%a2) @@ -279,71 +280,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000 + ((CONFIG_SYS_SDRAM_SIZE & 0x1fe0) << 11)), %d0 - movec %d0, %ACR0 /* Enable cache */ - - move.l #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x01000000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #0x81000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - /* No dcache, just a dummy function */ - .globl dcache_disable -dcache_disable: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-4), %a1 - move.l (%a1), %d0 - rts - -/*------------------------------------------------------------------------------*/ - .globl version_string version_string: .ascii U_BOOT_VERSION diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c index 48b37df..8d51d35 100644 --- a/cpu/mcf5445x/cpu_init.c +++ b/cpu/mcf5445x/cpu_init.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #if defined(CONFIG_CMD_NET) @@ -105,6 +106,14 @@ void cpu_init_f(void) fbcs->csmr5 = CONFIG_SYS_CS5_MASK; #endif + /* + * now the flash base address is no longer at 0 (Newer ColdFire family + * boot at address 0 instead of 0xFFnn_nnnn). The vector table must + * also move to the new location. + */ + if (CONFIG_SYS_CS0_BASE != 0) + setvbr(CONFIG_SYS_CS0_BASE); + #ifdef CONFIG_FSL_I2C gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA; #endif @@ -128,19 +137,43 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: - gpio->par_uart = + gpio->par_uart &= + ~(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); + gpio->par_uart |= (GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); break; case 1: - gpio->par_uart = +#ifdef CONFIG_SYS_UART1_PRI_GPIO + gpio->par_uart &= + ~(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); + gpio->par_uart |= (GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); +#elif defined(CONFIG_SYS_UART1_ALT1_GPIO) + gpio->par_ssi &= + (GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK); + gpio->par_ssi |= + (GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD); +#endif + break; + case 2: +#if defined(CONFIG_SYS_UART2_ALT1_GPIO) + gpio->par_timer &= + (GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK); + gpio->par_timer |= + (GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD); +#elif defined(CONFIG_SYS_UART2_ALT2_GPIO) + gpio->par_timer &= + (GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK); + gpio->par_timer |= + (GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); +#endif break; } } @@ -164,9 +197,9 @@ int fecpin_setclear(struct eth_device *dev, int setclear) ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0); if (info->iobase == CONFIG_SYS_FEC0_IOBASE) - gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK; + gpio->par_fec &= GPIO_PAR_FEC_FEC0_UNMASK; else - gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK; + gpio->par_fec &= GPIO_PAR_FEC_FEC1_UNMASK; } return 0; } diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S index d2d4439..738e4a7 100644 --- a/cpu/mcf5445x/start.S +++ b/cpu/mcf5445x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) - #define _START _start #define _FAULT _fault @@ -160,15 +156,13 @@ asm_dram_init: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CACR_STATUS), %a1 /* CACR */ - move.l #(ICACHE_STATUS), %a2 /* icache */ - move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* invalidate and disable cache */ - move.l #0x01004100, %d0 /* Invalidate cache cmd */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -411,15 +405,13 @@ _start: /* initialize general use internal ram */ move.l #0, %d0 - move.l #(CACR_STATUS), %a1 /* CACR */ - move.l #(ICACHE_STATUS), %a2 /* icache */ - move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* invalidate and disable cache */ - move.l #0x01004100, %d0 /* Invalidate cache cmd */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -544,107 +536,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d1 - - move.l #0x00040100, %d0 /* Invalidate icache */ - movec %d0, %CACR - - move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup icache */ - movec %d0, %ACR2 - - move.l #0x04088020, %d0 /* Enable bcache and icache */ - movec %d0, %CACR - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0xFFF77BFF, %d0 - or.l #0x00040100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Invalidate icache */ - clr.l %d0 - movec %d0, %ACR2 - movec %d0, %ACR3 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl icache_invalid -icache_invalid: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0x00040100, %d0 /* Invalidate icache */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_enable -dcache_enable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d1 - - move.l #0x01040100, %d0 - movec %d0, %CACR /* Invalidate dcache */ - - move.l #0x80088020, %d0 /* Enable bcache and icache */ - movec %d0, %CACR - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - and.l #0x7FFFFFFF, %d0 - or.l #0x01000000, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable dcache */ - clr.l %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_invalid -dcache_invalid: - move.l #(CACR_STATUS), %a1 /* read CACR Status */ - move.l (%a1), %d0 - - move.l #0x81088020, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable and invalidate cache */ - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - -/*------------------------------------------------------------------------------*/ .globl version_string version_string: diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c index 96a3132..60c9126 100644 --- a/cpu/mcf547x_8x/cpu_init.c +++ b/cpu/mcf547x_8x/cpu_init.c @@ -113,13 +113,13 @@ int cpu_init_r(void) return (0); } -void uart_port_conf(void) +void uart_port_conf(int port) { volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; volatile u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40); /* Setup Ports: */ - switch (CONFIG_SYS_UART_PORT) { + switch (port) { case 0: gpio->par_psc0 = (GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0); break; diff --git a/cpu/mcf547x_8x/start.S b/cpu/mcf547x_8x/start.S index 94ef14b..8411862 100644 --- a/cpu/mcf547x_8x/start.S +++ b/cpu/mcf547x_8x/start.S @@ -24,16 +24,12 @@ #include #include #include "version.h" +#include #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" #endif -/* last three long word reserved for cache status */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 4) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END- 8) -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-12) - #define _START _start #define _FAULT _fault @@ -158,10 +154,8 @@ _start: move.l #0, %d0 move.l #(ICACHE_STATUS), %a1 /* icache */ move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l #(CACR_STATUS), %a3 /* CACR */ move.l %d0, (%a1) move.l %d0, (%a2) - move.l %d0, (%a3) /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ @@ -279,81 +273,6 @@ _int_handler: RESTORE_ALL /*------------------------------------------------------------------------------*/ -/* cache functions */ - .globl icache_enable -icache_enable: - move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 - movec %d0, %ACR2 /* Enable cache */ - - move.l #0x020C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop - - move.l #(ICACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl icache_disable -icache_disable: - move.l #0x000C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR2 - movec %d0, %ACR3 - - move.l #(ICACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl icache_invalid -icache_invalid: - move.l #0x000C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - rts - - .globl icache_status -icache_status: - move.l #(ICACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - - .globl dcache_enable -dcache_enable: - bsr icache_disable - - move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 - movec %d0, %ACR0 /* Enable cache */ - - move.l #0xA30C8100, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - - move.l #(DCACHE_STATUS), %a1 - moveq #1, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_disable -dcache_disable: - move.l #0xA30C8100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Disable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 - movec %d0, %ACR1 - - move.l #(DCACHE_STATUS), %a1 - moveq #0, %d0 - move.l %d0, (%a1) - rts - - .globl dcache_status -dcache_status: - move.l #(DCACHE_STATUS), %a1 - move.l (%a1), %d0 - rts - -/*------------------------------------------------------------------------------*/ .globl version_string version_string: diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile index 06fdbcf..0ee0611 100644 --- a/cpu/mpc5xxx/Makefile +++ b/cpu/mpc5xxx/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o +SOBJS = io.o firmware_sc_task_bestcomm.impl.o COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index edfb828..b20234d 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -50,16 +50,10 @@ int checkcpu (void) { ulong clock = gd->cpu_clk; char buf[32]; -#ifndef CONFIG_MGT5100 uint svr, pvr; -#endif puts ("CPU: "); -#ifdef CONFIG_MGT5100 - puts (CPU_ID_STR); - printf (" (JTAG ID %08lx)", *(vu_long *)MPC5XXX_CDM_JTAGID); -#else svr = get_svr(); pvr = get_pvr(); @@ -77,7 +71,6 @@ int checkcpu (void) printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr), PVR_MAJ(pvr), PVR_MIN(pvr)); -#endif printf (" at %s MHz\n", strmhz (buf, clock)); return 0; } diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index 560c9b3..9daf375 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -53,10 +53,6 @@ void cpu_init_f (void) (struct mpc5xxx_gpt *) MPC5XXX_GPT; #endif /* CONFIG_WATCHDOG */ unsigned long addecr = (1 << 25); /* Boot_CS */ - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_MGT5100) - addecr |= (1 << 22); /* SDRAM enable */ -#endif /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -136,7 +132,6 @@ void cpu_init_f (void) out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG); #endif -#if defined(CONFIG_MPC5200) addecr |= 1; #if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE) out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START)); @@ -164,14 +159,9 @@ void cpu_init_f (void) #if defined(CONFIG_SYS_CS_DEADCYCLE) out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE); #endif -#endif /* CONFIG_MPC5200 */ /* Enable chip selects */ -#if defined(CONFIG_MGT5100) - out_be32(&mm->addecr, addecr); -#elif defined(CONFIG_MPC5200) out_be32(&mm->ipbi_ws_ctrl, addecr); -#endif out_be32(&lpb->cs_ctrl, (1 << 24)); /* Setup pin multiplexing */ @@ -179,7 +169,6 @@ void cpu_init_f (void) out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG); #endif -#if defined(CONFIG_MPC5200) /* enable timebase */ setbits_be32(&xlb->config, (1 << 13)); @@ -187,33 +176,29 @@ void cpu_init_f (void) setbits_be32(&xlb->config, (1 << 15)); out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d); -# if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) +#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) /* Motorola reports IPB should better run at 133 MHz. */ -# if defined(CONFIG_MGT5100) - setbits_be32(&mm->addecr, 1); -# elif defined(CONFIG_MPC5200) setbits_be32(&mm->ipbi_ws_ctrl, 1); -# endif /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */ addecr = in_be32(&cdm->cfg); addecr &= ~0x103; -# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2) +# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2) /* pci_clk_sel = 0x01 -> IPB_CLK/2 */ addecr |= 0x01; -# else +# else /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */ addecr |= 0x02; -# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */ +# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */ out_be32(&cdm->cfg, addecr); -# endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */ +#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */ /* Configure the XLB Arbiter */ out_be32(&xlb->master_pri_enable, 0xff); out_be32(&xlb->master_priority, 0x11111111); -# if defined(CONFIG_SYS_XLB_PIPELINING) +#if defined(CONFIG_SYS_XLB_PIPELINING) /* Enable piplining */ clrbits_be32(&xlb->config, (1 << 31)); -# endif +#endif #if defined(CONFIG_WATCHDOG) /* Charge the watchdog timer - prescaler = 64k, count = 64k*/ @@ -222,8 +207,6 @@ void cpu_init_f (void) reset_5xxx_watchdog(); #endif /* CONFIG_WATCHDOG */ - -#endif /* CONFIG_MPC5200 */ } /* @@ -235,11 +218,7 @@ int cpu_init_r (void) (struct mpc5xxx_intr *) MPC5XXX_ICTL; /* mask all interrupts */ -#if defined(CONFIG_MGT5100) - out_be32(&intr->per_mask, 0xfffffc00); -#elif defined(CONFIG_MPC5200) out_be32(&intr->per_mask, 0xffffff00); -#endif setbits_be32(&intr->main_mask, 0x0001ffff); clrbits_be32(&intr->ctrl, 0x00000f00); /* route critical ints to normal ints */ diff --git a/cpu/mpc5xxx/firmware_sc_task.impl.S b/cpu/mpc5xxx/firmware_sc_task.impl.S deleted file mode 100644 index b668ee5..0000000 --- a/cpu/mpc5xxx/firmware_sc_task.impl.S +++ /dev/null @@ -1,364 +0,0 @@ -/* - * Copyright (C) 2001, Software Center, Motorola China. - * - * This file contains microcode for the FEC controller of the MGT5100 CPU. - */ - -#include - -#if defined(CONFIG_MGT5100) - -/* sas/sccg, gas target */ -.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */ -.section smartdmaTaskTable,"aw",@progbits /* Task tables */ -.globl taskTable -taskTable: -.globl scEthernetRecv_Entry -scEthernetRecv_Entry: /* Task 0 */ -.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */ -.long scEthernetRecv_TDT - taskTable + 0x000000a4 -.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */ -.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */ -.long 0xf0000000 -.globl scEthernetXmit_Entry -scEthernetXmit_Entry: /* Task 1 */ -.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */ -.long scEthernetXmit_TDT - taskTable + 0x000000d0 -.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */ -.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */ -.long 0xf0000000 - - -.globl scEthernetRecv_TDT -scEthernetRecv_TDT: /* Task 0 Descriptor Table */ -.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */ -.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */ -.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x010c504c /* 0020: DRD2B1: var4 = EU1(); EU1(var1,var12) */ -.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */ -.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018c504e /* 0030: DRD2B1: var6 = EU1(); EU1(var1,var14) */ -.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x020c504f /* 0038: DRD2B1: var8 = EU1(); EU1(var1,var15) */ -.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */ -.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */ -.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */ -.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */ -.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */ -.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */ -.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */ -.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */ -.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */ -.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */ -.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */ -.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */ -.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080c504c /* 00A0: DRD2B1: idx0 = EU1(); EU1(var1,var12) */ -.long 0x000001f8 /* 00A4(:0): NOP */ - - -.globl scEthernetXmit_TDT -scEthernetXmit_TDT: /* Task 1 Descriptor Table */ -.long 0x80014800 /* 0000: LCDEXT: idx0 = 0xf0004800; ; */ -.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x024c504d /* 0020: DRD2B1: var9 = EU1(); EU1(var1,var13) */ -.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */ -.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */ -.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */ -.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x010c504e /* 0034: DRD2B1: var4 = EU1(); EU1(var1,var14) */ -.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x014c504f /* 003C: DRD2B1: var5 = EU1(); EU1(var1,var15) */ -.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x028c5050 /* 0044: DRD2B1: var10 = EU1(); EU1(var1,var16) */ -.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018c5051 /* 004C: DRD2B1: var6 = EU1(); EU1(var1,var17) */ -.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x01cc50a1 /* 0058: DRD2B1: var7 = EU1(); EU1(var2,idx1) */ -.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */ -.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */ -.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */ -.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */ -.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */ -.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */ -.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */ -.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */ -.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */ -.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */ -.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x60000100 /* 0088: DRD2A: EU0=0 EU1=1 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x0c4c5c4d /* 008C: DRD2B1: *idx1 = EU1(); EU1(*idx1,var13) */ -.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */ -.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */ -.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */ -.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */ -.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */ -.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080c504d /* 00CC: DRD2B1: idx0 = EU1(); EU1(var1,var13) */ -.long 0x000001f8 /* 00D0(:0): NOP */ - -.align 8 - -.globl scEthernetRecv_VarTab -scEthernetRecv_VarTab: /* Task 0 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long 0xf0004800 /* var[9] */ -.long 0x00000008 /* var[10] */ -.long 0x0000000c /* var[11] */ -.long 0x80000000 /* var[12] */ -.long 0x00000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x20000000 /* var[15] */ -.long 0x000005e4 /* var[16] */ -.long 0x0000000e /* var[17] */ -.long 0x000005e0 /* var[18] */ -.long 0x00000004 /* var[19] */ -.long 0x00000000 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x20000001 /* inc[2] */ -.long 0x80000000 /* inc[3] */ -.long 0x40000000 /* inc[4] */ -.long 0x00000000 /* inc[5] */ -.long 0x00000000 /* inc[6] */ -.long 0x00000000 /* inc[7] */ - -.align 8 - -.globl scEthernetXmit_VarTab -scEthernetXmit_VarTab: /* Task 1 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long 0x00000000 /* var[9] */ -.long 0x00000000 /* var[10] */ -.long 0xf0004800 /* var[11] */ -.long 0x00000000 /* var[12] */ -.long 0x80000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x08000000 /* var[15] */ -.long 0x20000000 /* var[16] */ -.long 0x0000ffff /* var[17] */ -.long 0xffffffff /* var[18] */ -.long 0x00000008 /* var[19] */ -.long 0x00000000 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x40000000 /* inc[2] */ -.long 0x4000ffff /* inc[3] */ -.long 0xe0000001 /* inc[4] */ -.long 0x80000000 /* inc[5] */ -.long 0x00000000 /* inc[6] */ -.long 0x00000000 /* inc[7] */ - -.align 8 - -.globl scEthernetRecv_FDT -scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x05800000 /* and(), EU# 1 */ -.long 0x05400000 /* andn(), EU# 1 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - -.align 8 - -.globl scEthernetXmit_FDT -scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x05800000 /* and(), EU# 1 */ -.long 0x05400000 /* andn(), EU# 1 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - - -.align 8 -.globl scEthernetRecv_CSave -scEthernetRecv_CSave: /* Task 0 context save space */ -.space 256, 0x0 - - -.align 8 -.globl scEthernetXmit_CSave -scEthernetXmit_CSave: /* Task 1 context save space */ -.space 256, 0x0 - -#endif /* CONFIG_MGT5100 */ diff --git a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S index d140c7e..00c2312 100644 --- a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S +++ b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S @@ -6,8 +6,6 @@ #include -#if defined(CONFIG_MPC5200) - /* sas/sccg, gas target */ .section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */ .section smartdmaTaskTable,"aw",@progbits /* Task tables */ @@ -359,5 +357,3 @@ scEthernetRecv_CSave: /* Task 0 context save space */ .globl scEthernetXmit_CSave scEthernetXmit_CSave: /* Task 1 context save space */ .space 128, 0x0 - -#endif /* CONFIG_MPC5200 */ diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c index 225738a..8268f8a 100644 --- a/cpu/mpc5xxx/pci_mpc5200.c +++ b/cpu/mpc5xxx/pci_mpc5200.c @@ -23,7 +23,7 @@ #include -#if defined(CONFIG_PCI) && defined(CONFIG_MPC5200) +#if defined(CONFIG_PCI) #include #include @@ -184,4 +184,4 @@ void pci_mpc5xxx_init (struct pci_controller *hose) hose->last_busno = pci_hose_scan(hose); } -#endif /* CONFIG_PCI && CONFIG_MPC5200 */ +#endif /* CONFIG_PCI */ diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c index a8a384a..6675988 100644 --- a/cpu/mpc5xxx/serial.c +++ b/cpu/mpc5xxx/serial.c @@ -50,8 +50,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PSC_BASE MPC5XXX_PSC2 #elif CONFIG_PSC_CONSOLE == 3 #define PSC_BASE MPC5XXX_PSC3 -#elif defined(CONFIG_MGT5100) -#error CONFIG_PSC_CONSOLE must be in 1, 2 or 3 #elif CONFIG_PSC_CONSOLE == 4 #define PSC_BASE MPC5XXX_PSC4 #elif CONFIG_PSC_CONSOLE == 5 @@ -73,8 +71,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PSC_BASE2 MPC5XXX_PSC2 #elif CONFIG_PSC_CONSOLE2 == 3 #define PSC_BASE2 MPC5XXX_PSC3 -#elif defined(CONFIG_MGT5100) -#error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3 #elif CONFIG_PSC_CONSOLE2 == 4 #define PSC_BASE2 MPC5XXX_PSC4 #elif CONFIG_PSC_CONSOLE2 == 5 @@ -104,23 +100,14 @@ int serial_init (void) psc->command = PSC_SEL_MODE_REG_1; /* select clock sources */ -#if defined(CONFIG_MGT5100) - psc->psc_clock_select = 0xdd00; - baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32; -#elif defined(CONFIG_MPC5200) psc->psc_clock_select = 0; baseclk = (gd->ipb_clk + 16) / 32; -#endif /* switch to UART mode */ psc->sicr = 0; /* configure parity, bit length and so on */ -#if defined(CONFIG_MGT5100) - psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#elif defined(CONFIG_MPC5200) psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#endif psc->mode = PSC_MODE_ONE_STOP; /* set up UART divisor */ @@ -246,11 +233,7 @@ void serial_setbrg(void) #endif unsigned long baseclk, div; -#if defined(CONFIG_MGT5100) - baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32; -#elif defined(CONFIG_MPC5200) baseclk = (gd->ipb_clk + 16) / 32; -#endif /* set up UART divisor */ div = (baseclk + (gd->baudrate/2)) / gd->baudrate; diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S index d499da5..ba49944 100644 --- a/cpu/mpc5xxx/start.S +++ b/cpu/mpc5xxx/start.S @@ -111,9 +111,6 @@ boot_warm: # if defined(CONFIG_SYS_RAMBOOT) # error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT # endif /* CONFIG_SYS_RAMBOOT */ -# if defined(CONFIG_MGT5100) -# error CONFIG_SYS_LOWBOOT is incompatible with MGT5100 -# endif /* CONFIG_MGT5100 */ lis r4, CONFIG_SYS_DEFAULT_MBAR@h lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l @@ -145,14 +142,9 @@ lowboot_reentry: #if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT) lis r3, CONFIG_SYS_MBAR@h ori r3, r3, CONFIG_SYS_MBAR@l -#if defined(CONFIG_MPC5200) /* MBAR is mirrored into the MBAR SPR */ mtspr MBAR,r3 rlwinm r3, r3, 16, 16, 31 -#endif -#if defined(CONFIG_MGT5100) - rlwinm r3, r3, 17, 15, 31 -#endif lis r4, CONFIG_SYS_DEFAULT_MBAR@h stw r3, 0(r4) #endif /* CONFIG_SYS_DEFAULT_MBAR */ diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c index 66a4af8..7976e4d 100644 --- a/cpu/mpc5xxx/usb_ohci.c +++ b/cpu/mpc5xxx/usb_ohci.c @@ -76,13 +76,8 @@ #define m16_swap(x) swap_16(x) #define m32_swap(x) swap_32(x) -#ifdef CONFIG_MPC5200 #define ohci_cpu_to_le16(x) (x) #define ohci_cpu_to_le32(x) (x) -#else -#define ohci_cpu_to_le16(x) swap_16(x) -#define ohci_cpu_to_le32(x) swap_32(x) -#endif /* global ohci_t */ static ohci_t gohci; @@ -803,9 +798,7 @@ static td_t * dl_reverse_done_list (ohci_t *ohci) } else td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2); } -#ifdef CONFIG_MPC5200 td_list->hwNextTD = 0; -#endif } td_list->next_dl_td = td_rev; diff --git a/cpu/mpc5xxx/usb_ohci.h b/cpu/mpc5xxx/usb_ohci.h index 6eedbdd..629b529 100644 --- a/cpu/mpc5xxx/usb_ohci.h +++ b/cpu/mpc5xxx/usb_ohci.h @@ -127,13 +127,8 @@ typedef struct td td_t; #define NUM_INTS 32 /* part of the OHCI standard */ struct ohci_hcca { __u32 int_table[NUM_INTS]; /* Interrupt ED table */ -#if defined(CONFIG_MPC5200) __u16 pad1; /* set to 0 on each frame_no change */ __u16 frame_no; /* current frame number */ -#else - __u16 frame_no; /* current frame number */ - __u16 pad1; /* set to 0 on each frame_no change */ -#endif __u32 done_head; /* info returned for an interrupt */ u8 reserved_for_hc[116]; } __attribute__((aligned(256))); diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index 0fe3041..7a89b56 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -385,34 +385,38 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) } while ((*fn->init) (cookie)); /* Load the data */ - while (bytecount < bsize) { - - /* Xilinx detects an error if INIT goes low (active) - while DONE is low (inactive) */ - if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { - puts ("** CRC error during FPGA load.\n"); - return (FPGA_FAIL); - } - val = data [bytecount ++]; - i = 8; - do { - /* Deassert the clock */ - (*fn->clk) (FALSE, TRUE, cookie); - CONFIG_FPGA_DELAY (); - /* Write data */ - (*fn->wr) ((val & 0x80), TRUE, cookie); - CONFIG_FPGA_DELAY (); - /* Assert the clock */ - (*fn->clk) (TRUE, TRUE, cookie); - CONFIG_FPGA_DELAY (); - val <<= 1; - i --; - } while (i > 0); + if(*fn->bwr) + (*fn->bwr) (data, bsize, TRUE, cookie); + else { + while (bytecount < bsize) { + + /* Xilinx detects an error if INIT goes low (active) + while DONE is low (inactive) */ + if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { + puts ("** CRC error during FPGA load.\n"); + return (FPGA_FAIL); + } + val = data [bytecount ++]; + i = 8; + do { + /* Deassert the clock */ + (*fn->clk) (FALSE, TRUE, cookie); + CONFIG_FPGA_DELAY (); + /* Write data */ + (*fn->wr) ((val & 0x80), TRUE, cookie); + CONFIG_FPGA_DELAY (); + /* Assert the clock */ + (*fn->clk) (TRUE, TRUE, cookie); + CONFIG_FPGA_DELAY (); + val <<= 1; + i --; + } while (i > 0); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK - if (bytecount % (bsize / 40) == 0) - putc ('.'); /* let them know we are alive */ + if (bytecount % (bsize / 40) == 0) + putc ('.'); /* let them know we are alive */ #endif + } } CONFIG_FPGA_DELAY (); diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c index 1b20a76..8d0b6d6 100644 --- a/drivers/input/ps2ser.c +++ b/drivers/input/ps2ser.c @@ -36,8 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PSC_BASE MPC5XXX_PSC2 #elif CONFIG_PS2SERIAL == 3 #define PSC_BASE MPC5XXX_PSC3 -#elif defined(CONFIG_MGT5100) -#error CONFIG_PS2SERIAL must be in 1, 2 or 3 #elif CONFIG_PS2SERIAL == 4 #define PSC_BASE MPC5XXX_PSC4 #elif CONFIG_PS2SERIAL == 5 @@ -87,23 +85,14 @@ int ps2ser_init(void) psc->command = PSC_SEL_MODE_REG_1; /* select clock sources */ -#if defined(CONFIG_MGT5100) - psc->psc_clock_select = 0xdd00; - baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32; -#elif defined(CONFIG_MPC5200) psc->psc_clock_select = 0; baseclk = (gd->ipb_clk + 16) / 32; -#endif /* switch to UART mode */ psc->sicr = 0; /* configure parity, bit length and so on */ -#if defined(CONFIG_MGT5100) - psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#elif defined(CONFIG_MPC5200) psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; -#endif psc->mode = PSC_MODE_ONE_STOP; /* set up UART divisor */ diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index cd1a86e..d0240f5 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -605,6 +605,63 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, return retcode; } +static int use_flash_status_poll(flash_info_t *info) +{ +#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL + if (info->vendor == CFI_CMDSET_AMD_EXTENDED || + info->vendor == CFI_CMDSET_AMD_STANDARD) + return 1; +#endif + return 0; +} + +static int flash_status_poll(flash_info_t *info, void *src, void *dst, + ulong tout, char *prompt) +{ +#ifdef CONFIG_SYS_CFI_FLASH_STATUS_POLL + ulong start; + int ready; + +#if CONFIG_SYS_HZ != 1000 + if ((ulong)CONFIG_SYS_HZ > 100000) + tout *= (ulong)CONFIG_SYS_HZ / 1000; /* for a big HZ, avoid overflow */ + else + tout = DIV_ROUND_UP(tout * (ulong)CONFIG_SYS_HZ, 1000); +#endif + + /* Wait for command completion */ + start = get_timer(0); + while (1) { + switch (info->portwidth) { + case FLASH_CFI_8BIT: + ready = flash_read8(dst) == flash_read8(src); + break; + case FLASH_CFI_16BIT: + ready = flash_read16(dst) == flash_read16(src); + break; + case FLASH_CFI_32BIT: + ready = flash_read32(dst) == flash_read32(src); + break; + case FLASH_CFI_64BIT: + ready = flash_read64(dst) == flash_read64(src); + break; + default: + ready = 0; + break; + } + if (ready) + break; + if (get_timer(start) > tout) { + printf("Flash %s timeout at address %lx data %lx\n", + prompt, (ulong)dst, (ulong)flash_read8(dst)); + return ERR_TIMOUT; + } + udelay(1); /* also triggers watchdog */ + } +#endif /* CONFIG_SYS_CFI_FLASH_STATUS_POLL */ + return ERR_OK; +} + /*----------------------------------------------------------------------- */ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) @@ -752,7 +809,12 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest, if (!sect_found) sect = find_sector (info, dest); - return flash_full_status_check (info, sect, info->write_tout, "write"); + if (use_flash_status_poll(info)) + return flash_status_poll(info, &cword, dstaddr, + info->write_tout, "write"); + else + return flash_full_status_check(info, sect, + info->write_tout, "write"); } #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE @@ -914,9 +976,15 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, } flash_write_cmd (info, sector, 0, AMD_CMD_WRITE_BUFFER_CONFIRM); - retcode = flash_full_status_check (info, sector, - info->buffer_write_tout, - "buffer write"); + if (use_flash_status_poll(info)) + retcode = flash_status_poll(info, src - (1 << shift), + dst - (1 << shift), + info->buffer_write_tout, + "buffer write"); + else + retcode = flash_full_status_check(info, sector, + info->buffer_write_tout, + "buffer write"); break; default: @@ -938,6 +1006,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int rcode = 0; int prot; flash_sect_t sect; + int st; if (info->flash_id != FLASH_MAN_CFI) { puts ("Can't erase unknown flash type - aborted\n"); @@ -1001,10 +1070,20 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) break; } - if (flash_full_status_check - (info, sect, info->erase_blk_tout, "erase")) { + if (use_flash_status_poll(info)) { + cfiword_t cword = (cfiword_t)0xffffffffffffffffULL; + void *dest; + dest = flash_map(info, sect, 0); + st = flash_status_poll(info, &cword, dest, + info->erase_blk_tout, "erase"); + flash_unmap(info, sect, 0, dest); + } else + st = flash_full_status_check(info, sect, + info->erase_blk_tout, + "erase"); + if (st) rcode = 1; - } else if (flash_verbose) + else if (flash_verbose) putc ('.'); } } diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 40002be..d5eb54a 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -31,6 +31,209 @@ #include +#ifdef CONFIG_ATMEL_NAND_HWECC + +/* Register access macros */ +#define ecc_readl(add, reg) \ + readl(AT91_BASE_SYS + add + ATMEL_ECC_##reg) +#define ecc_writel(add, reg, value) \ + writel((value), AT91_BASE_SYS + add + ATMEL_ECC_##reg) + +#include "atmel_nand_ecc.h" /* Hardware ECC registers */ + +/* oob layout for large page size + * bad block info is on bytes 0 and 1 + * the bytes have to be consecutives to avoid + * several NAND_CMD_RNDOUT during read + */ +static struct nand_ecclayout atmel_oobinfo_large = { + .eccbytes = 4, + .eccpos = {60, 61, 62, 63}, + .oobfree = { + {2, 58} + }, +}; + +/* oob layout for small page size + * bad block info is on bytes 4 and 5 + * the bytes have to be consecutives to avoid + * several NAND_CMD_RNDOUT during read + */ +static struct nand_ecclayout atmel_oobinfo_small = { + .eccbytes = 4, + .eccpos = {0, 1, 2, 3}, + .oobfree = { + {6, 10} + }, +}; + +/* + * Calculate HW ECC + * + * function called after a write + * + * mtd: MTD block structure + * dat: raw data (unused) + * ecc_code: buffer for ECC + */ +static int atmel_nand_calculate(struct mtd_info *mtd, + const u_char *dat, unsigned char *ecc_code) +{ + struct nand_chip *nand_chip = mtd->priv; + unsigned int ecc_value; + + /* get the first 2 ECC bytes */ + ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR); + + ecc_code[0] = ecc_value & 0xFF; + ecc_code[1] = (ecc_value >> 8) & 0xFF; + + /* get the last 2 ECC bytes */ + ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, NPR) & ATMEL_ECC_NPARITY; + + ecc_code[2] = ecc_value & 0xFF; + ecc_code[3] = (ecc_value >> 8) & 0xFF; + + return 0; +} + +/* + * HW ECC read page function + * + * mtd: mtd info structure + * chip: nand chip info structure + * buf: buffer to store read data + */ +static int atmel_nand_read_page(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int page) +{ + int eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + uint8_t *ecc_pos; + int stat; + + /* read the page */ + chip->read_buf(mtd, p, eccsize); + + /* move to ECC position if needed */ + if (eccpos[0] != 0) { + /* This only works on large pages + * because the ECC controller waits for + * NAND_CMD_RNDOUTSTART after the + * NAND_CMD_RNDOUT. + * anyway, for small pages, the eccpos[0] == 0 + */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, + mtd->writesize + eccpos[0], -1); + } + + /* the ECC controller needs to read the ECC just after the data */ + ecc_pos = oob + eccpos[0]; + chip->read_buf(mtd, ecc_pos, eccbytes); + + /* check if there's an error */ + stat = chip->ecc.correct(mtd, p, oob, NULL); + + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + + /* get back to oob start (end of page) */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); + + /* read the oob */ + chip->read_buf(mtd, oob, mtd->oobsize); + + return 0; +} + +/* + * HW ECC Correction + * + * function called after a read + * + * mtd: MTD block structure + * dat: raw data read from the chip + * read_ecc: ECC from the chip (unused) + * isnull: unused + * + * Detect and correct a 1 bit error for a page + */ +static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *isnull) +{ + struct nand_chip *nand_chip = mtd->priv; + unsigned int ecc_status, ecc_parity, ecc_mode; + unsigned int ecc_word, ecc_bit; + + /* get the status from the Status Register */ + ecc_status = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, SR); + + /* if there's no error */ + if (likely(!(ecc_status & ATMEL_ECC_RECERR))) + return 0; + + /* get error bit offset (4 bits) */ + ecc_bit = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_BITADDR; + /* get word address (12 bits) */ + ecc_word = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_WORDADDR; + ecc_word >>= 4; + + /* if there are multiple errors */ + if (ecc_status & ATMEL_ECC_MULERR) { + /* check if it is a freshly erased block + * (filled with 0xff) */ + if ((ecc_bit == ATMEL_ECC_BITADDR) + && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) { + /* the block has just been erased, return OK */ + return 0; + } + /* it doesn't seems to be a freshly + * erased block. + * We can't correct so many errors */ + printk(KERN_WARNING "atmel_nand : multiple errors detected." + " Unable to correct.\n"); + return -EIO; + } + + /* if there's a single bit error : we can correct it */ + if (ecc_status & ATMEL_ECC_ECCERR) { + /* there's nothing much to do here. + * the bit error is on the ECC itself. + */ + printk(KERN_WARNING "atmel_nand : one bit error on ECC code." + " Nothing to correct\n"); + return 0; + } + + printk(KERN_WARNING "atmel_nand : one bit error on data." + " (word offset in the page :" + " 0x%x bit offset : 0x%x)\n", + ecc_word, ecc_bit); + /* correct the error */ + if (nand_chip->options & NAND_BUSWIDTH_16) { + /* 16 bits words */ + ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit); + } else { + /* 8 bits words */ + dat[ecc_word] ^= (1 << ecc_bit); + } + printk(KERN_WARNING "atmel_nand : error corrected\n"); + return 1; +} + +/* + * Enable HW ECC : unused on most chips + */ +static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) +{ +} +#endif + static void at91_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { @@ -64,6 +267,11 @@ static int at91_nand_ready(struct mtd_info *mtd) int board_nand_init(struct nand_chip *nand) { +#ifdef CONFIG_ATMEL_NAND_HWECC + static int chip_nr = 0; + struct mtd_info *mtd; +#endif + nand->ecc.mode = NAND_ECC_SOFT; #ifdef CONFIG_SYS_NAND_DBW_16 nand->options = NAND_BUSWIDTH_16; @@ -74,5 +282,62 @@ int board_nand_init(struct nand_chip *nand) #endif nand->chip_delay = 20; +#ifdef CONFIG_ATMEL_NAND_HWECC + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.calculate = atmel_nand_calculate; + nand->ecc.correct = atmel_nand_correct; + nand->ecc.hwctl = atmel_nand_hwctl; + nand->ecc.read_page = atmel_nand_read_page; + nand->ecc.bytes = 4; +#endif + +#ifdef CONFIG_ATMEL_NAND_HWECC + mtd = &nand_info[chip_nr++]; + mtd->priv = nand; + + /* Detect NAND chips */ + if (nand_scan_ident(mtd, 1)) { + printk(KERN_WARNING "NAND Flash not found !\n"); + return -ENXIO; + } + + if (nand->ecc.mode == NAND_ECC_HW) { + /* ECC is calculated for the whole page (1 step) */ + nand->ecc.size = mtd->writesize; + + /* set ECC page size and oob layout */ + switch (mtd->writesize) { + case 512: + nand->ecc.layout = &atmel_oobinfo_small; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_528); + break; + case 1024: + nand->ecc.layout = &atmel_oobinfo_large; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_1056); + break; + case 2048: + nand->ecc.layout = &atmel_oobinfo_large; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_2112); + break; + case 4096: + nand->ecc.layout = &atmel_oobinfo_large; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_4224); + break; + default: + /* page size not handled by HW ECC */ + /* switching back to soft ECC */ + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.calculate = NULL; + nand->ecc.correct = NULL; + nand->ecc.hwctl = NULL; + nand->ecc.read_page = NULL; + nand->ecc.postpad = 0; + nand->ecc.prepad = 0; + nand->ecc.bytes = 0; + break; + } + } +#endif + return 0; } diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h new file mode 100644 index 0000000..1ee7f99 --- /dev/null +++ b/drivers/mtd/nand/atmel_nand_ecc.h @@ -0,0 +1,36 @@ +/* + * Error Corrected Code Controller (ECC) - System peripherals regsters. + * Based on AT91SAM9260 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef ATMEL_NAND_ECC_H +#define ATMEL_NAND_ECC_H + +#define ATMEL_ECC_CR 0x00 /* Control register */ +#define ATMEL_ECC_RST (1 << 0) /* Reset parity */ + +#define ATMEL_ECC_MR 0x04 /* Mode register */ +#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */ +#define ATMEL_ECC_PAGESIZE_528 (0) +#define ATMEL_ECC_PAGESIZE_1056 (1) +#define ATMEL_ECC_PAGESIZE_2112 (2) +#define ATMEL_ECC_PAGESIZE_4224 (3) + +#define ATMEL_ECC_SR 0x08 /* Status register */ +#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */ +#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ +#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */ + +#define ATMEL_ECC_PR 0x0c /* Parity register */ +#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */ +#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ + +#define ATMEL_ECC_NPR 0x10 /* NParity register */ +#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */ + +#endif diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index bfc2acf..4ca738e 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -57,8 +57,6 @@ #define ECC_STATE_ERR_CORR_COMP_P 0x2 #define ECC_STATE_ERR_CORR_COMP_N 0x3 -static emif_registers *const emif_regs = (void *) DAVINCI_ASYNC_EMIF_CNTRL_BASE; - /* * Exploit the little endianness of the ARM to do multi-byte transfers * per device read. This can perform over twice as quickly as individual @@ -93,7 +91,7 @@ static void nand_davinci_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) /* copy aligned data */ while (len >= 4) { - *(u32 *)buf = readl(nand); + *(u32 *)buf = __raw_readl(nand); buf += 4; len -= 4; } @@ -138,7 +136,7 @@ static void nand_davinci_write_buf(struct mtd_info *mtd, const uint8_t *buf, /* copy aligned data */ while (len >= 4) { - writel(*(u32 *)buf, nand); + __raw_writel(*(u32 *)buf, nand); buf += 4; len -= 4; } @@ -156,7 +154,8 @@ static void nand_davinci_write_buf(struct mtd_info *mtd, const uint8_t *buf, } } -static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { struct nand_chip *this = mtd->priv; u_int32_t IO_ADDR_W = (u_int32_t)this->IO_ADDR_W; @@ -164,9 +163,9 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int c if (ctrl & NAND_CTRL_CHANGE) { IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); - if ( ctrl & NAND_CLE ) + if (ctrl & NAND_CLE) IO_ADDR_W |= MASK_CLE; - if ( ctrl & NAND_ALE ) + if (ctrl & NAND_ALE) IO_ADDR_W |= MASK_ALE; this->IO_ADDR_W = (void __iomem *) IO_ADDR_W; } @@ -181,24 +180,26 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) { u_int32_t val; - (void)readl(&(emif_regs->NANDFECC[CONFIG_SYS_NAND_CS - 2])); + (void)__raw_readl(&(davinci_emif_regs->nandfecc[ + CONFIG_SYS_NAND_CS - 2])); - val = readl(&emif_regs->NANDFCR); + val = __raw_readl(&davinci_emif_regs->nandfcr); val |= DAVINCI_NANDFCR_NAND_ENABLE(CONFIG_SYS_NAND_CS); val |= DAVINCI_NANDFCR_1BIT_ECC_START(CONFIG_SYS_NAND_CS); - writel(val, &emif_regs->NANDFCR); + __raw_writel(val, &davinci_emif_regs->nandfcr); } static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) { u_int32_t ecc = 0; - ecc = readl(&(emif_regs->NANDFECC[region - 1])); + ecc = __raw_readl(&(davinci_emif_regs->nandfecc[region - 1])); - return(ecc); + return ecc; } -static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) { u_int32_t tmp; const int region = 1; @@ -232,7 +233,8 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u return 0; } -static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) { struct nand_chip *this = mtd->priv; u_int32_t ecc_nand = read_ecc[0] | (read_ecc[1] << 8) | @@ -268,7 +270,7 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char * return -1; } } - return(0); + return 0; } #endif /* CONFIG_SYS_NAND_HW_ECC */ @@ -315,15 +317,15 @@ static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode) * Start a new ECC calculation for reading or writing 512 bytes * of data. */ - val = readl(&emif_regs->NANDFCR); + val = __raw_readl(&davinci_emif_regs->nandfcr); val &= ~DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK; val |= DAVINCI_NANDFCR_NAND_ENABLE(CONFIG_SYS_NAND_CS); val |= DAVINCI_NANDFCR_4BIT_ECC_SEL(CONFIG_SYS_NAND_CS); val |= DAVINCI_NANDFCR_4BIT_ECC_START; - writel(val, &emif_regs->NANDFCR); + __raw_writel(val, &davinci_emif_regs->nandfcr); break; case NAND_ECC_READSYN: - val = emif_regs->NAND4BITECC1; + val = __raw_readl(&davinci_emif_regs->nand4bitecc[0]); break; default: break; @@ -332,10 +334,12 @@ static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode) static u32 nand_davinci_4bit_readecc(struct mtd_info *mtd, unsigned int ecc[4]) { - ecc[0] = emif_regs->NAND4BITECC1 & NAND_4BITECC_MASK; - ecc[1] = emif_regs->NAND4BITECC2 & NAND_4BITECC_MASK; - ecc[2] = emif_regs->NAND4BITECC3 & NAND_4BITECC_MASK; - ecc[3] = emif_regs->NAND4BITECC4 & NAND_4BITECC_MASK; + int i; + + for (i = 0; i < 4; i++) { + ecc[i] = __raw_readl(&davinci_emif_regs->nand4bitecc[i]) & + NAND_4BITECC_MASK; + } return 0; } @@ -418,32 +422,36 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat, */ /*Take 2 bits from 8th byte and 8 bits from 9th byte */ - writel(((ecc16[4]) >> 6) & 0x3FF, &emif_regs->NAND4BITECCLOAD); + __raw_writel(((ecc16[4]) >> 6) & 0x3FF, + &davinci_emif_regs->nand4biteccload); /* Take 4 bits from 7th byte and 6 bits from 8th byte */ - writel((((ecc16[3]) >> 12) & 0xF) | ((((ecc16[4])) << 4) & 0x3F0), - &emif_regs->NAND4BITECCLOAD); + __raw_writel((((ecc16[3]) >> 12) & 0xF) | ((((ecc16[4])) << 4) & 0x3F0), + &davinci_emif_regs->nand4biteccload); /* Take 6 bits from 6th byte and 4 bits from 7th byte */ - writel((ecc16[3] >> 2) & 0x3FF, &emif_regs->NAND4BITECCLOAD); + __raw_writel((ecc16[3] >> 2) & 0x3FF, + &davinci_emif_regs->nand4biteccload); /* Take 8 bits from 5th byte and 2 bits from 6th byte */ - writel(((ecc16[2]) >> 8) | ((((ecc16[3])) << 8) & 0x300), - &emif_regs->NAND4BITECCLOAD); + __raw_writel(((ecc16[2]) >> 8) | ((((ecc16[3])) << 8) & 0x300), + &davinci_emif_regs->nand4biteccload); /*Take 2 bits from 3rd byte and 8 bits from 4th byte */ - writel((((ecc16[1]) >> 14) & 0x3) | ((((ecc16[2])) << 2) & 0x3FC), - &emif_regs->NAND4BITECCLOAD); + __raw_writel((((ecc16[1]) >> 14) & 0x3) | ((((ecc16[2])) << 2) & 0x3FC), + &davinci_emif_regs->nand4biteccload); /* Take 4 bits form 2nd bytes and 6 bits from 3rd bytes */ - writel(((ecc16[1]) >> 4) & 0x3FF, &emif_regs->NAND4BITECCLOAD); + __raw_writel(((ecc16[1]) >> 4) & 0x3FF, + &davinci_emif_regs->nand4biteccload); /* Take 6 bits from 1st byte and 4 bits from 2nd byte */ - writel((((ecc16[0]) >> 10) & 0x3F) | (((ecc16[1]) << 6) & 0x3C0), - &emif_regs->NAND4BITECCLOAD); + __raw_writel((((ecc16[0]) >> 10) & 0x3F) | (((ecc16[1]) << 6) & 0x3C0), + &davinci_emif_regs->nand4biteccload); /* Take 10 bits from 0th and 1st bytes */ - writel((ecc16[0]) & 0x3FF, &emif_regs->NAND4BITECCLOAD); + __raw_writel((ecc16[0]) & 0x3FF, + &davinci_emif_regs->nand4biteccload); /* * Perform a dummy read to the EMIF Revision Code and Status register. @@ -451,7 +459,7 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat, * writing the ECC values in previous step. */ - val = emif_regs->NANDFSR; + val = __raw_readl(&davinci_emif_regs->nandfsr); /* * Read the syndrome from the NAND Flash 4-Bit ECC 1-4 registers. @@ -467,13 +475,13 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat, * Clear any previous address calculation by doing a dummy read of an * error address register. */ - val = emif_regs->NANDERRADD1; + val = __raw_readl(&davinci_emif_regs->nanderradd1); /* * Set the addr_calc_st bit(bit no 13) in the NAND Flash Control * register to 1. */ - emif_regs->NANDFCR |= 1 << 13; + __raw_writel(1 << 13, &davinci_emif_regs->nandfcr); /* * Wait for the corr_state field (bits 8 to 11)in the @@ -481,12 +489,12 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat, */ i = NAND_TIMEOUT; do { - val = emif_regs->NANDFSR; + val = __raw_readl(&davinci_emif_regs->nandfsr); val &= 0xc00; i--; } while ((i > 0) && val); - iserror = emif_regs->NANDFSR; + iserror = __raw_readl(&davinci_emif_regs->nandfsr); iserror &= EMIF_NANDFSR_ECC_STATE_MASK; iserror = iserror >> 8; @@ -501,32 +509,33 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat, */ if (iserror == ECC_STATE_NO_ERR) { - val = emif_regs->NANDERRVAL1; + val = __raw_readl(&davinci_emif_regs->nanderrval1); return 0; } else if (iserror == ECC_STATE_TOO_MANY_ERRS) { - val = emif_regs->NANDERRVAL1; + val = __raw_readl(&davinci_emif_regs->nanderrval1); return -1; } - numerrors = ((emif_regs->NANDFSR >> 16) & 0x3) + 1; + numerrors = ((__raw_readl(&davinci_emif_regs->nandfsr) >> 16) + & 0x3) + 1; /* Read the error address, error value and correct */ for (i = 0; i < numerrors; i++) { if (i > 1) { erroraddress = - ((emif_regs->NANDERRADD2 >> + ((__raw_readl(&davinci_emif_regs->nanderradd2) >> (16 * (i & 1))) & 0x3FF); erroraddress = ((512 + 7) - erroraddress); errorvalue = - ((emif_regs->NANDERRVAL2 >> + ((__raw_readl(&davinci_emif_regs->nanderrval2) >> (16 * (i & 1))) & 0xFF); } else { erroraddress = - ((emif_regs->NANDERRADD1 >> + ((__raw_readl(&davinci_emif_regs->nanderradd1) >> (16 * (i & 1))) & 0x3FF); erroraddress = ((512 + 7) - erroraddress); errorvalue = - ((emif_regs->NANDERRVAL1 >> + ((__raw_readl(&davinci_emif_regs->nanderrval1) >> (16 * (i & 1))) & 0xFF); } /* xor the corrupt data with error value */ @@ -540,7 +549,7 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat, static int nand_davinci_dev_ready(struct mtd_info *mtd) { - return emif_regs->NANDFSR & 0x1; + return __raw_readl(&davinci_emif_regs->nandfsr) & 0x1; } static void nand_flash_init(void) @@ -561,21 +570,22 @@ static void nand_flash_init(void) * * *------------------------------------------------------------------*/ acfg1 = 0 - | (0 << 31 ) /* selectStrobe */ - | (0 << 30 ) /* extWait */ - | (1 << 26 ) /* writeSetup 10 ns */ - | (3 << 20 ) /* writeStrobe 40 ns */ - | (1 << 17 ) /* writeHold 10 ns */ - | (1 << 13 ) /* readSetup 10 ns */ - | (5 << 7 ) /* readStrobe 60 ns */ - | (1 << 4 ) /* readHold 10 ns */ - | (3 << 2 ) /* turnAround ?? ns */ - | (0 << 0 ) /* asyncSize 8-bit bus */ + | (0 << 31) /* selectStrobe */ + | (0 << 30) /* extWait */ + | (1 << 26) /* writeSetup 10 ns */ + | (3 << 20) /* writeStrobe 40 ns */ + | (1 << 17) /* writeHold 10 ns */ + | (1 << 13) /* readSetup 10 ns */ + | (5 << 7) /* readStrobe 60 ns */ + | (1 << 4) /* readHold 10 ns */ + | (3 << 2) /* turnAround ?? ns */ + | (0 << 0) /* asyncSize 8-bit bus */ ; - emif_regs->AB1CR = acfg1; /* CS2 */ + __raw_writel(acfg1, &davinci_emif_regs->ab1cr); /* CS2 */ - emif_regs->NANDFCR = 0x00000101; /* NAND flash on CS2 */ + /* NAND flash on CS2 */ + __raw_writel(0x00000101, &davinci_emif_regs->nandfcr); #endif } diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c index 1876b76..c2b1bbd 100644 --- a/drivers/net/mpc5xxx_fec.c +++ b/drivers/net/mpc5xxx_fec.c @@ -336,13 +336,11 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) */ fec->eth->xmit_fsm = 0x03000000; -#if defined(CONFIG_MPC5200) /* - * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't + * Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't * work w/ the current receive task. */ sdma->PtdCntrl |= 0x00000001; -#endif /* * Set priority of different initiators @@ -579,9 +577,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) /********************************************************************/ static void mpc5xxx_fec_halt(struct eth_device *dev) { -#if defined(CONFIG_MPC5200) struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; -#endif mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; int counter = 0xffff; @@ -611,13 +607,11 @@ static void mpc5xxx_fec_halt(struct eth_device *dev) SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO); SDMA_TASK_DISABLE (FEC_RECV_TASK_NO); -#if defined(CONFIG_MPC5200) /* - * Turn on COMM bus prefetch in the MGT5200 BestComm after we're + * Turn on COMM bus prefetch in the MPC5200 BestComm after we're * done. It doesn't work w/ the current receive task. */ sdma->PtdCntrl &= ~0x00000001; -#endif /* * Disable the Ethernet Controller diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 0b53140..d93b24b 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; -extern void uart_port_conf(void); +extern void uart_port_conf(int port); int serial_init(void) { @@ -43,7 +43,7 @@ int serial_init(void) uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); - uart_port_conf(); + uart_port_conf(CONFIG_SYS_UART_PORT); /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ uart->ucr = UART_UCR_RESET_RX; diff --git a/include/asm-arm/arch-davinci/emif_defs.h b/include/asm-arm/arch-davinci/emif_defs.h index aa57703..b48ec17 100644 --- a/include/asm-arm/arch-davinci/emif_defs.h +++ b/include/asm-arm/arch-davinci/emif_defs.h @@ -24,47 +24,42 @@ #include -typedef struct davinci_emif_regs { - dv_reg ERCSR; - dv_reg AWCCR; - dv_reg SDBCR; - dv_reg SDRCR; - dv_reg AB1CR; - dv_reg AB2CR; - dv_reg AB3CR; - dv_reg AB4CR; - dv_reg SDTIMR; - dv_reg DDRSR; - dv_reg DDRPHYCR; - dv_reg DDRPHYSR; - dv_reg TOTAR; - dv_reg TOTACTR; - dv_reg DDRPHYID_REV; - dv_reg SDSRETR; - dv_reg EIRR; - dv_reg EIMR; - dv_reg EIMSR; - dv_reg EIMCR; - dv_reg IOCTRLR; - dv_reg IOSTATR; - u_int8_t RSVD0[8]; - dv_reg NANDFCR; - dv_reg NANDFSR; - u_int8_t RSVD1[8]; - dv_reg NANDFECC[4]; - u_int8_t RSVD2[60]; - dv_reg NAND4BITECCLOAD; - dv_reg NAND4BITECC1; - dv_reg NAND4BITECC2; - dv_reg NAND4BITECC3; - dv_reg NAND4BITECC4; - dv_reg NANDERRADD1; - dv_reg NANDERRADD2; - dv_reg NANDERRVAL1; - dv_reg NANDERRVAL2; -} emif_registers; - -typedef emif_registers *emifregs; +struct davinci_emif_regs { + u_int32_t ercsr; + u_int32_t awccr; + u_int32_t sdbcr; + u_int32_t sdrcr; + u_int32_t ab1cr; + u_int32_t ab2cr; + u_int32_t ab3cr; + u_int32_t ab4cr; + u_int32_t sdtimr; + u_int32_t ddrsr; + u_int32_t ddrphycr; + u_int32_t ddrphysr; + u_int32_t totar; + u_int32_t totactr; + u_int32_t ddrphyid_rev; + u_int32_t sdsretr; + u_int32_t eirr; + u_int32_t eimr; + u_int32_t eimsr; + u_int32_t eimcr; + u_int32_t ioctrlr; + u_int32_t iostatr; + u_int8_t rsvd0[8]; + u_int32_t nandfcr; + u_int32_t nandfsr; + u_int8_t rsvd1[8]; + u_int32_t nandfecc[4]; + u_int8_t rsvd2[60]; + u_int32_t nand4biteccload; + u_int32_t nand4bitecc[4]; + u_int32_t nanderradd1; + u_int32_t nanderradd2; + u_int32_t nanderrval1; + u_int32_t nanderrval2; +}; #define davinci_emif_regs \ ((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE) diff --git a/include/asm-m68k/cache.h b/include/asm-m68k/cache.h new file mode 100644 index 0000000..7c84e48 --- /dev/null +++ b/include/asm-m68k/cache.h @@ -0,0 +1,210 @@ +/* + * ColdFire cache + * + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CACHE_H +#define __CACHE_H + +#if defined(CONFIG_MCF520x) || defined(CONFIG_MCF523x) || \ + defined(CONFIG_MCF52x2) || defined(CONFIG_MCF5227x) +#define CONFIG_CF_V2 +#endif + +#if defined(CONFIG_MCF532x) || defined(CONFIG_MCF5301x) +#define CONFIG_CF_V3 +#endif + +#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) +#define CONFIG_CF_V4 +#if defined(CONFIG_MCF5441x) +#define CONFIG_CF_V4E /* Four Extra ACRn */ +#endif +#endif + +/* ***** CACR ***** */ +/* V2 Core */ +#ifdef CONFIG_CF_V2 + +#define CF_CACR_CENB (1 << 31) +#define CF_CACR_CPD (1 << 28) +#define CF_CACR_CFRZ (1 << 27) +#define CF_CACR_CEIB (1 << 10) +#define CF_CACR_DCM (1 << 9) +#define CF_CACR_DBWE (1 << 8) + +#if defined(CONFIG_MCF5249) || defined(CONFIG_MCF5253) +#define CF_CACR_DWP (1 << 6) +#else +#define CF_CACR_CINV (1 << 24) +#define CF_CACR_DISI (1 << 23) +#define CF_CACR_DISD (1 << 22) +#define CF_CACR_INVI (1 << 21) +#define CF_CACR_INVD (1 << 20) +#define CF_CACR_DWP (1 << 5) +#define CF_CACR_EUSP (1 << 4) +#endif /* CONFIG_MCF5249 || CONFIG_MCF5253 */ + +#endif /* CONFIG_CF_V2 */ + +/* V3 Core */ +#ifdef CONFIG_CF_V3 + +#define CF_CACR_EC (1 << 31) +#define CF_CACR_ESB (1 << 29) +#define CF_CACR_DPI (1 << 28) +#define CF_CACR_HLCK (1 << 27) +#define CF_CACR_CINVA (1 << 24) +#define CF_CACR_DNFB (1 << 10) +#define CF_CACR_DCM_UNMASK 0xFFFFFCFF +#define CF_CACR_DCM_WT (0 << 8) +#define CF_CACR_DCM_CB (1 << 8) +#define CF_CACR_DCM_P (2 << 8) +#define CF_CACR_DCM_IP (3 << 8) +#define CF_CACR_DW (1 << 5) +#define CF_CACR_EUSP (1 << 4) + +#endif /* CONFIG_CF_V3 */ + +/* V4 Core */ +#ifdef CONFIG_CF_V4 + +#define CF_CACR_DEC (1 << 31) +#define CF_CACR_DW (1 << 30) +#define CF_CACR_DESB (1 << 29) +#define CF_CACR_DDPI (1 << 28) +#define CF_CACR_DHLCK (1 << 27) +#define CF_CACR_DDCM_UNMASK (0xF9FFFFFF) +#define CF_CACR_DDCM_WT (0 << 25) +#define CF_CACR_DDCM_CB (1 << 25) +#define CF_CACR_DDCM_P (2 << 25) +#define CF_CACR_DDCM_IP (3 << 25) +#define CF_CACR_DCINVA (1 << 24) + +#define CF_CACR_DDSP (1 << 23) +#define CF_CACR_BEC (1 << 19) +#define CF_CACR_BCINVA (1 << 18) +#define CF_CACR_IEC (1 << 15) +#define CF_CACR_DNFB (1 << 13) +#define CF_CACR_IDPI (1 << 12) +#define CF_CACR_IHLCK (1 << 11) +#define CF_CACR_IDCM (1 << 10) +#define CF_CACR_ICINVA (1 << 8) +#define CF_CACR_IDSP (1 << 7) +#define CF_CACR_EUSP (1 << 5) + +#ifdef CONFIG_MCF5445x +#define CF_CACR_IVO (1 << 20) +#define CF_CACR_SPA (1 << 14) +#else +#define CF_CACR_DF (1 << 4) +#endif + +#endif /* CONFIG_CF_V4 */ + +/* ***** ACR ***** */ +#define CF_ACR_ADR_UNMASK (0x00FFFFFF) +#define CF_ACR_ADR(x) ((x & 0xFF) << 24) +#define CF_ACR_ADRMSK_UNMASK (0xFF00FFFF) +#define CF_ACR_ADRMSK(x) ((x & 0xFF) << 16) +#define CF_ACR_EN (1 << 15) +#define CF_ACR_SM_UNMASK (0xFFFF9FFF) +#define CF_ACR_SM_UM (0 << 13) +#define CF_ACR_SM_SM (1 << 13) +#define CF_ACR_SM_ALL (3 << 13) +#define CF_ACR_WP (1 << 2) + +/* V2 Core */ +#ifdef CONFIG_CF_V2 +#define CF_ACR_CM (1 << 6) +#define CF_ACR_BWE (1 << 5) +#else +/* V3 & V4 */ +#define CF_ACR_CM_UNMASK (0xFFFFFF9F) +#define CF_ACR_CM_WT (0 << 5) +#define CF_ACR_CM_CB (1 << 5) +#define CF_ACR_CM_P (2 << 5) +#define CF_ACR_CM_IP (3 << 5) +#endif /* CONFIG_CF_V2 */ + +/* V4 Core */ +#ifdef CONFIG_CF_V4 +#define CF_ACR_AMM (1 << 10) +#define CF_ACR_SP (1 << 3) +#endif /* CONFIG_CF_V4 */ + + +#ifndef CONFIG_SYS_CACHE_ICACR +#define CONFIG_SYS_CACHE_ICACR 0 +#endif + +#ifndef CONFIG_SYS_CACHE_DCACR +#ifdef CONFIG_SYS_CACHE_ICACR +#define CONFIG_SYS_CACHE_DCACR CONFIG_SYS_CACHE_ICACR +#else +#define CONFIG_SYS_CACHE_DCACR 0 +#endif +#endif + +#ifndef CONFIG_SYS_CACHE_ACR0 +#define CONFIG_SYS_CACHE_ACR0 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR1 +#define CONFIG_SYS_CACHE_ACR1 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR2 +#define CONFIG_SYS_CACHE_ACR2 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR3 +#define CONFIG_SYS_CACHE_ACR3 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR4 +#define CONFIG_SYS_CACHE_ACR4 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR5 +#define CONFIG_SYS_CACHE_ACR5 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR6 +#define CONFIG_SYS_CACHE_ACR6 0 +#endif + +#ifndef CONFIG_SYS_CACHE_ACR7 +#define CONFIG_SYS_CACHE_ACR7 0 +#endif + +#define CF_ADDRMASK(x) (((x > 0x10) ? ((x >> 4) - 1) : (x)) << 16) + +#ifndef __ASSEMBLY__ /* put C only stuff in this section */ + +void icache_invalid(void); +void dcache_invalid(void); + +#endif + +#endif /* __CACHE_H */ diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h index b5a4cb5..28cd107 100644 --- a/include/asm-m68k/immap_5253.h +++ b/include/asm-m68k/immap_5253.h @@ -37,6 +37,7 @@ #define MMAP_CAN0 (CONFIG_SYS_MBAR + 0x00010000) #define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x00011000) +#define MMAP_PAR (CONFIG_SYS_MBAR2 + 0x0000019C) #define MMAP_I2C1 (CONFIG_SYS_MBAR2 + 0x00000440) #define MMAP_UART2 (CONFIG_SYS_MBAR2 + 0x00000C00) diff --git a/include/asm-m68k/m520x.h b/include/asm-m68k/m520x.h index 267bfd9..71f147e 100644 --- a/include/asm-m68k/m520x.h +++ b/include/asm-m68k/m520x.h @@ -70,7 +70,6 @@ #define PACR_TP 1 #define SCM_BMT_BME (0x00000008) -#define SCM_BMT_BMT_MASK (0x07) #define SCM_BMT_BMT(x) ((x) & 0x07) #define SCM_BMT_BMT1024 (0x0000) #define SCM_BMT_BMT512 (0x0001) @@ -179,7 +178,7 @@ #define CCM_CCR_PLL_MODE (0x0002) #define CCM_CCR_RESERVED (0x0001) -#define CCM_CIR_PIN(x) (((x) & 0x03FF) << 6) +#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6) #define CCM_CIR_PRN(x) ((x) & 0x003F) /* *** General Purpose I/O (GPIO) *** */ @@ -196,7 +195,7 @@ #define GPIO_PAR_FBCTL_OE (0x10) #define GPIO_PAR_FBCTL_TA (0x08) #define GPIO_PAR_FBCTL_RWB (0x04) -#define GPIO_PAR_FBCTL_TS_MASK (0xFC) +#define GPIO_PAR_FBCTL_TS_UNMASK (0xFC) #define GPIO_PAR_FBCTL_TS_TS (0x03) #define GPIO_PAR_FBCTL_TS_DMA (0x02) @@ -207,39 +206,39 @@ #define GPIO_PAR_CS3 (0x08) #define GPIO_PAR_CS2 (0x04) -#define GPIO_PAR_CS1_MASK (0xFC) +#define GPIO_PAR_CS1_UNMASK (0xFC) #define GPIO_PAR_CS1_CS1 (0x03) #define GPIO_PAR_CS1_SDCS1 (0x02) -#define GPIO_PAR_FECI2C_RMII_MASK (0x0F) -#define GPIO_PAR_FECI2C_MDC_MASK (0x3F) +#define GPIO_PAR_FECI2C_RMII_UNMASK (0x0F) +#define GPIO_PAR_FECI2C_MDC_UNMASK (0x3F) #define GPIO_PAR_FECI2C_MDC_MDC (0xC0) #define GPIO_PAR_FECI2C_MDC_SCL (0x80) #define GPIO_PAR_FECI2C_MDC_U2TXD (0x40) -#define GPIO_PAR_FECI2C_MDIO_MASK (0xCF) +#define GPIO_PAR_FECI2C_MDIO_UNMASK (0xCF) #define GPIO_PAR_FECI2C_MDIO_MDIO (0x30) #define GPIO_PAR_FECI2C_MDIO_SDA (0x20) #define GPIO_PAR_FECI2C_MDIO_U2RXD (0x10) -#define GPIO_PAR_FECI2C_I2C_MASK (0xF0) -#define GPIO_PAR_FECI2C_SCL_MASK (0xF3) +#define GPIO_PAR_FECI2C_I2C_UNMASK (0xF0) +#define GPIO_PAR_FECI2C_SCL_UNMASK (0xF3) #define GPIO_PAR_FECI2C_SCL_SCL (0x0C) #define GPIO_PAR_FECI2C_SCL_U2RXD (0x04) -#define GPIO_PAR_FECI2C_SDA_MASK (0xFC) +#define GPIO_PAR_FECI2C_SDA_UNMASK (0xFC) #define GPIO_PAR_FECI2C_SDA_SDA (0x03) #define GPIO_PAR_FECI2C_SDA_U2TXD (0x01) -#define GPIO_PAR_QSPI_PCS2_MASK (0x3F) +#define GPIO_PAR_QSPI_PCS2_UNMASK (0x3F) #define GPIO_PAR_QSPI_PCS2_PCS2 (0xC0) #define GPIO_PAR_QSPI_PCS2_DACK0 (0x80) #define GPIO_PAR_QSPI_PCS2_U2RTS (0x40) -#define GPIO_PAR_QSPI_DIN_MASK (0xCF) +#define GPIO_PAR_QSPI_DIN_UNMASK (0xCF) #define GPIO_PAR_QSPI_DIN_DIN (0x30) #define GPIO_PAR_QSPI_DIN_DREQ0 (0x20) #define GPIO_PAR_QSPI_DIN_U2CTS (0x10) -#define GPIO_PAR_QSPI_DOUT_MASK (0xF3) +#define GPIO_PAR_QSPI_DOUT_UNMASK (0xF3) #define GPIO_PAR_QSPI_DOUT_DOUT (0x0C) #define GPIO_PAR_QSPI_DOUT_SDA (0x08) -#define GPIO_PAR_QSPI_SCK_MASK (0xFC) +#define GPIO_PAR_QSPI_SCK_UNMASK (0xFC) #define GPIO_PAR_QSPI_SCK_SCK (0x03) #define GPIO_PAR_QSPI_SCK_SCL (0x02) @@ -247,50 +246,50 @@ #define GPIO_PAR_TMR_TIN2(x) (((x) & 0x03) << 4) #define GPIO_PAR_TMR_TIN1(x) (((x) & 0x03) << 2) #define GPIO_PAR_TMR_TIN0(x) ((x) & 0x03) -#define GPIO_PAR_TMR_TIN3_MASK (0x3F) +#define GPIO_PAR_TMR_TIN3_UNMASK (0x3F) #define GPIO_PAR_TMR_TIN3_TIN3 (0xC0) #define GPIO_PAR_TMR_TIN3_TOUT3 (0x80) #define GPIO_PAR_TMR_TIN3_U2CTS (0x40) -#define GPIO_PAR_TMR_TIN2_MASK (0xCF) +#define GPIO_PAR_TMR_TIN2_UNMASK (0xCF) #define GPIO_PAR_TMR_TIN2_TIN2 (0x30) #define GPIO_PAR_TMR_TIN2_TOUT2 (0x20) #define GPIO_PAR_TMR_TIN2_U2RTS (0x10) -#define GPIO_PAR_TMR_TIN1_MASK (0xF3) +#define GPIO_PAR_TMR_TIN1_UNMASK (0xF3) #define GPIO_PAR_TMR_TIN1_TIN1 (0x0C) #define GPIO_PAR_TMR_TIN1_TOUT1 (0x08) #define GPIO_PAR_TMR_TIN1_U2RXD (0x04) -#define GPIO_PAR_TMR_TIN0_MASK (0xFC) +#define GPIO_PAR_TMR_TIN0_UNMASK (0xFC) #define GPIO_PAR_TMR_TIN0_TIN0 (0x03) #define GPIO_PAR_TMR_TIN0_TOUT0 (0x02) #define GPIO_PAR_TMR_TIN0_U2TXD (0x01) -#define GPIO_PAR_UART1_MASK (0xF03F) -#define GPIO_PAR_UART0_MASK (0xFFC0) -#define GPIO_PAR_UART_U1CTS_MASK (0xF3FF) +#define GPIO_PAR_UART1_UNMASK (0xF03F) +#define GPIO_PAR_UART0_UNMASK (0xFFC0) +#define GPIO_PAR_UART_U1CTS_UNMASK (0xF3FF) #define GPIO_PAR_UART_U1CTS_U1CTS (0x0C00) #define GPIO_PAR_UART_U1CTS_TIN1 (0x0800) #define GPIO_PAR_UART_U1CTS_PCS1 (0x0400) -#define GPIO_PAR_UART_U1RTS_MASK (0xFCFF) +#define GPIO_PAR_UART_U1RTS_UNMASK (0xFCFF) #define GPIO_PAR_UART_U1RTS_U1RTS (0x0300) #define GPIO_PAR_UART_U1RTS_TOUT1 (0x0200) #define GPIO_PAR_UART_U1RTS_PCS1 (0x0100) #define GPIO_PAR_UART_U1TXD (0x0080) #define GPIO_PAR_UART_U1RXD (0x0040) -#define GPIO_PAR_UART_U0CTS_MASK (0xFFCF) +#define GPIO_PAR_UART_U0CTS_UNMASK (0xFFCF) #define GPIO_PAR_UART_U0CTS_U0CTS (0x0030) #define GPIO_PAR_UART_U0CTS_TIN0 (0x0020) #define GPIO_PAR_UART_U0CTS_PCS0 (0x0010) -#define GPIO_PAR_UART_U0RTS_MASK (0xFFF3) +#define GPIO_PAR_UART_U0RTS_UNMASK (0xFFF3) #define GPIO_PAR_UART_U0RTS_U0RTS (0x000C) #define GPIO_PAR_UART_U0RTS_TOUT0 (0x0008) #define GPIO_PAR_UART_U0RTS_PCS0 (0x0004) #define GPIO_PAR_UART_U0TXD (0x0002) #define GPIO_PAR_UART_U0RXD (0x0001) -#define GPIO_PAR_FEC_7W_MASK (0xF3) +#define GPIO_PAR_FEC_7W_UNMASK (0xF3) #define GPIO_PAR_FEC_7W_FEC (0x0C) #define GPIO_PAR_FEC_7W_U1RTS (0x04) -#define GPIO_PAR_FEC_MII_MASK (0xFC) +#define GPIO_PAR_FEC_MII_UNMASK (0xFC) #define GPIO_PAR_FEC_MII_FEC (0x03) #define GPIO_PAR_FEC_MII_UnCTS (0x01) @@ -300,17 +299,17 @@ #define GPIO_MSCR_FB_DUP(x) (((x) & 0x03) << 4) #define GPIO_MSCR_FB_DLO(x) (((x) & 0x03) << 2) #define GPIO_MSCR_FB_ADRCTL(x) ((x) & 0x03) -#define GPIO_MSCR_FB_FBCLK_MASK (0x3F) -#define GPIO_MSCR_FB_DUP_MASK (0xCF) -#define GPIO_MSCR_FB_DLO_MASK (0xF3) -#define GPIO_MSCR_FB_ADRCTL_MASK (0xFC) +#define GPIO_MSCR_FB_FBCLK_UNMASK (0x3F) +#define GPIO_MSCR_FB_DUP_UNMASK (0xCF) +#define GPIO_MSCR_FB_DLO_UNMASK (0xF3) +#define GPIO_MSCR_FB_ADRCTL_UNMASK (0xFC) #define GPIO_MSCR_SDR_SDCLKB(x) (((x) & 0x03) << 4) #define GPIO_MSCR_SDR_SDCLK(x) (((x) & 0x03) << 2) #define GPIO_MSCR_SDR_SDRAM(x) ((x) & 0x03) -#define GPIO_MSCR_SDR_SDCLKB_MASK (0xCF) -#define GPIO_MSCR_SDR_SDCLK_MASK (0xF3) -#define GPIO_MSCR_SDR_SDRAM_MASK (0xFC) +#define GPIO_MSCR_SDR_SDCLKB_UNMASK (0xCF) +#define GPIO_MSCR_SDR_SDCLK_UNMASK (0xF3) +#define GPIO_MSCR_SDR_SDRAM_UNMASK (0xFC) #define MSCR_25VDDR (0x03) #define MSCR_18VDDR_FULL (0x02) @@ -318,27 +317,27 @@ #define MSCR_18VDDR_HALF (0x00) #define GPIO_DSCR_I2C(x) ((x) & 0x03) -#define GPIO_DSCR_I2C_MASK (0xFC) +#define GPIO_DSCR_I2C_UNMASK (0xFC) #define GPIO_DSCR_MISC_DBG(x) (((x) & 0x03) << 4) -#define GPIO_DSCR_MISC_DBG_MASK (0xCF) +#define GPIO_DSCR_MISC_DBG_UNMASK (0xCF) #define GPIO_DSCR_MISC_RSTOUT(x) (((x) & 0x03) << 2) -#define GPIO_DSCR_MISC_RSTOUT_MASK (0xF3) +#define GPIO_DSCR_MISC_RSTOUT_UNMASK (0xF3) #define GPIO_DSCR_MISC_TIMER(x) ((x) & 0x03) -#define GPIO_DSCR_MISC_TIMER_MASK (0xFC) +#define GPIO_DSCR_MISC_TIMER_UNMASK (0xFC) #define GPIO_DSCR_FEC(x) ((x) & 0x03) -#define GPIO_DSCR_FEC_MASK (0xFC) +#define GPIO_DSCR_FEC_UNMASK (0xFC) #define GPIO_DSCR_UART_UART1(x) (((x) & 0x03) << 4) -#define GPIO_DSCR_UART_UART1_MASK (0xCF) +#define GPIO_DSCR_UART_UART1_UNMASK (0xCF) #define GPIO_DSCR_UART_UART0(x) (((x) & 0x03) << 2) -#define GPIO_DSCR_UART_UART0_MASK (0xF3) +#define GPIO_DSCR_UART_UART0_UNMASK (0xF3) #define GPIO_DSCR_UART_IRQ(x) ((x) & 0x03) -#define GPIO_DSCR_UART_IRQ_MASK (0xFC) +#define GPIO_DSCR_UART_IRQ_UNMASK (0xFC) #define GPIO_DSCR_QSPI(x) ((x) & 0x03) -#define GPIO_DSCR_QSPI_MASK (0xFC) +#define GPIO_DSCR_QSPI_UNMASK (0xFC) #define DSCR_50PF (0x03) #define DSCR_30PF (0x02) @@ -347,12 +346,12 @@ /* *** Phase Locked Loop (PLL) *** */ #define PLL_PODR_CPUDIV(x) (((x) & 0x0F) << 4) -#define PLL_PODR_CPUDIV_MASK (0x0F) +#define PLL_PODR_CPUDIV_UNMASK (0x0F) #define PLL_PODR_BUSDIV(x) ((x) & 0x0F) -#define PLL_PODR_BUSDIV_MASK (0xF0) +#define PLL_PODR_BUSDIV_UNMASK (0xF0) #define PLL_PCR_DITHEN (0x80) #define PLL_PCR_DITHDEV(x) ((x) & 0x07) -#define PLL_PCR_DITHDEV_MASK (0xF8) +#define PLL_PCR_DITHDEV_UNMASK (0xF8) #endif /* __M520X__ */ diff --git a/include/asm-m68k/m5227x.h b/include/asm-m68k/m5227x.h index 824d333..c77d5dd 100644 --- a/include/asm-m68k/m5227x.h +++ b/include/asm-m68k/m5227x.h @@ -117,36 +117,34 @@ /* Bit definitions and macros for CCR */ #define CCM_CCR_DRAMSEL (0x0100) -#define CCM_CCR_CSC_MASK (0xFF3F) +#define CCM_CCR_CSC_UNMASK (0xFF3F) #define CCM_CCR_CSC_FBCS5_CS4 (0x00C0) #define CCM_CCR_CSC_FBCS5_A22 (0x0080) #define CCM_CCR_CSC_FB_A23_A22 (0x0040) #define CCM_CCR_LIMP (0x0020) #define CCM_CCR_LOAD (0x0010) -#define CCM_CCR_BOOTPS_MASK (0xFFF3) +#define CCM_CCR_BOOTPS_UNMASK (0xFFF3) #define CCM_CCR_BOOTPS_PS16 (0x0008) #define CCM_CCR_BOOTPS_PS8 (0x0004) #define CCM_CCR_BOOTPS_PS32 (0x0000) #define CCM_CCR_OSCMODE_OSCBYPASS (0x0002) /* Bit definitions and macros for RCON */ -#define CCM_RCON_CSC_MASK (0xFF3F) +#define CCM_RCON_CSC_UNMASK (0xFF3F) #define CCM_RCON_CSC_FBCS5_CS4 (0x00C0) #define CCM_RCON_CSC_FBCS5_A22 (0x0080) #define CCM_RCON_CSC_FB_A23_A22 (0x0040) #define CCM_RCON_LIMP (0x0020) #define CCM_RCON_LOAD (0x0010) -#define CCM_RCON_BOOTPS_MASK (0xFFF3) +#define CCM_RCON_BOOTPS_UNMASK (0xFFF3) #define CCM_RCON_BOOTPS_PS16 (0x0008) #define CCM_RCON_BOOTPS_PS8 (0x0004) #define CCM_RCON_BOOTPS_PS32 (0x0000) #define CCM_RCON_OSCMODE_OSCBYPASS (0x0002) /* Bit definitions and macros for CIR */ -#define CCM_CIR_PRN(x) (((x)&0x003F)) /* Part revision number */ -#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) /* Part identification number */ -#define CCM_CIR_PIN_MASK (0xFFC0) -#define CCM_CIR_PRN_MASK (0x003F) +#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6) +#define CCM_CIR_PRN(x) ((x) & 0x003F) #define CCM_CIR_PIN_MCF52277 (0x0000) /* Bit definitions and macros for MISCCR */ @@ -195,7 +193,7 @@ * General Purpose I/O Module (GPIO) *********************************************************************/ /* Bit definitions and macros for PAR_BE */ -#define GPIO_PAR_BE_MASK (0x0F) +#define GPIO_PAR_BE_UNMASK (0x0F) #define GPIO_PAR_BE_BE3_BE3 (0x08) #define GPIO_PAR_BE_BE3_GPIO (0x00) #define GPIO_PAR_BE_BE2_BE2 (0x04) @@ -217,111 +215,111 @@ #define GPIO_PAR_FBCTL_OE (0x80) #define GPIO_PAR_FBCTL_TA (0x40) #define GPIO_PAR_FBCTL_RW (0x20) -#define GPIO_PAR_FBCTL_TS_MASK (0xE7) +#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7) #define GPIO_PAR_FBCTL_TS_FBTS (0x18) #define GPIO_PAR_FBCTL_TS_DMAACK (0x10) #define GPIO_PAR_FBCTL_TS_GPIO (0x00) /* Bit definitions and macros for PAR_FECI2C */ -#define GPIO_PAR_I2C_SCL_MASK (0xF3) +#define GPIO_PAR_I2C_SCL_UNMASK (0xF3) #define GPIO_PAR_I2C_SCL_SCL (0x0C) #define GPIO_PAR_I2C_SCL_CANTXD (0x08) #define GPIO_PAR_I2C_SCL_U2TXD (0x04) #define GPIO_PAR_I2C_SCL_GPIO (0x00) -#define GPIO_PAR_I2C_SDA_MASK (0xFC) +#define GPIO_PAR_I2C_SDA_UNMASK (0xFC) #define GPIO_PAR_I2C_SDA_SDA (0x03) #define GPIO_PAR_I2C_SDA_CANRXD (0x02) #define GPIO_PAR_I2C_SDA_U2RXD (0x01) #define GPIO_PAR_I2C_SDA_GPIO (0x00) /* Bit definitions and macros for PAR_UART */ -#define GPIO_PAR_UART_U1CTS_MASK (0x3FFF) +#define GPIO_PAR_UART_U1CTS_UNMASK (0x3FFF) #define GPIO_PAR_UART_U1CTS_U1CTS (0xC000) #define GPIO_PAR_UART_U1CTS_SSIBCLK (0x8000) #define GPIO_PAR_UART_U1CTS_LCDCLS (0x4000) #define GPIO_PAR_UART_U1CTS_GPIO (0x0000) -#define GPIO_PAR_UART_U1RTS_MASK (0xCFFF) +#define GPIO_PAR_UART_U1RTS_UNMASK (0xCFFF) #define GPIO_PAR_UART_U1RTS_U1RTS (0x3000) #define GPIO_PAR_UART_U1RTS_SSIFS (0x2000) #define GPIO_PAR_UART_U1RTS_LCDPS (0x1000) #define GPIO_PAR_UART_U1RTS_GPIO (0x0000) -#define GPIO_PAR_UART_U1RXD_MASK (0xF3FF) +#define GPIO_PAR_UART_U1RXD_UNMASK (0xF3FF) #define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00) #define GPIO_PAR_UART_U1RXD_SSIRXD (0x0800) #define GPIO_PAR_UART_U1RXD_GPIO (0x0000) -#define GPIO_PAR_UART_U1TXD_MASK (0xFCFF) +#define GPIO_PAR_UART_U1TXD_UNMASK (0xFCFF) #define GPIO_PAR_UART_U1TXD_U1TXD (0x0300) #define GPIO_PAR_UART_U1TXD_SSITXD (0x0200) #define GPIO_PAR_UART_U1TXD_GPIO (0x0000) -#define GPIO_PAR_UART_U0CTS_MASK (0xFF3F) +#define GPIO_PAR_UART_U0CTS_UNMASK (0xFF3F) #define GPIO_PAR_UART_U0CTS_U0CTS (0x00C0) #define GPIO_PAR_UART_U0CTS_T1OUT (0x0080) #define GPIO_PAR_UART_U0CTS_USBVBUSEN (0x0040) #define GPIO_PAR_UART_U0CTS_GPIO (0x0000) -#define GPIO_PAR_UART_U0RTS_MASK (0xFFCF) +#define GPIO_PAR_UART_U0RTS_UNMASK (0xFFCF) #define GPIO_PAR_UART_U0RTS_U0RTS (0x0030) #define GPIO_PAR_UART_U0RTS_T1IN (0x0020) #define GPIO_PAR_UART_U0RTS_USBVBUSOC (0x0010) #define GPIO_PAR_UART_U0RTS_GPIO (0x0000) -#define GPIO_PAR_UART_U0RXD_MASK (0xFFF3) +#define GPIO_PAR_UART_U0RXD_UNMASK (0xFFF3) #define GPIO_PAR_UART_U0RXD_U0RXD (0x000C) #define GPIO_PAR_UART_U0RXD_CANRX (0x0008) #define GPIO_PAR_UART_U0RXD_GPIO (0x0000) -#define GPIO_PAR_UART_U0TXD_MASK (0xFFFC) +#define GPIO_PAR_UART_U0TXD_UNMASK (0xFFFC) #define GPIO_PAR_UART_U0TXD_U0TXD (0x0003) #define GPIO_PAR_UART_U0TXD_CANTX (0x0002) #define GPIO_PAR_UART_U0TXD_GPIO (0x0000) /* Bit definitions and macros for PAR_DSPI */ -#define GPIO_PAR_DSPI_PCS0_MASK (0x3F) +#define GPIO_PAR_DSPI_PCS0_UNMASK (0x3F) #define GPIO_PAR_DSPI_PCS0_PCS0 (0xC0) #define GPIO_PAR_DSPI_PCS0_U2RTS (0x80) #define GPIO_PAR_DSPI_PCS0_GPIO (0x00) -#define GPIO_PAR_DSPI_SIN_MASK (0xCF) +#define GPIO_PAR_DSPI_SIN_UNMASK (0xCF) #define GPIO_PAR_DSPI_SIN_SIN (0x30) #define GPIO_PAR_DSPI_SIN_U2RXD (0x20) #define GPIO_PAR_DSPI_SIN_GPIO (0x00) -#define GPIO_PAR_DSPI_SOUT_MASK (0xF3) +#define GPIO_PAR_DSPI_SOUT_UNMASK (0xF3) #define GPIO_PAR_DSPI_SOUT_SOUT (0x0C) #define GPIO_PAR_DSPI_SOUT_U2TXD (0x08) #define GPIO_PAR_DSPI_SOUT_GPIO (0x00) -#define GPIO_PAR_DSPI_SCK_MASK (0xFC) +#define GPIO_PAR_DSPI_SCK_UNMASK (0xFC) #define GPIO_PAR_DSPI_SCK_SCK (0x03) #define GPIO_PAR_DSPI_SCK_U2CTS (0x02) #define GPIO_PAR_DSPI_SCK_GPIO (0x00) /* Bit definitions and macros for PAR_TIMER */ -#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F) #define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) #define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) #define GPIO_PAR_TIMER_T3IN_SSIMCLK (0x40) #define GPIO_PAR_TIMER_T3IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF) #define GPIO_PAR_TIMER_T2IN_T2IN (0x30) #define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) #define GPIO_PAR_TIMER_T2IN_DSPIPCS2 (0x10) #define GPIO_PAR_TIMER_T2IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3) #define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) #define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) #define GPIO_PAR_TIMER_T1IN_LCDCONTRAST (0x04) #define GPIO_PAR_TIMER_T1IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC) #define GPIO_PAR_TIMER_T0IN_T0IN (0x03) #define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) #define GPIO_PAR_TIMER_T0IN_LCDREV (0x01) #define GPIO_PAR_TIMER_T0IN_GPIO (0x00) /* Bit definitions and macros for GPIO_PAR_LCDCTL */ -#define GPIO_PAR_LCDCTL_ACDOE_MASK (0xE7) +#define GPIO_PAR_LCDCTL_ACDOE_UNMASK (0xE7) #define GPIO_PAR_LCDCTL_ACDOE_ACDOE (0x18) #define GPIO_PAR_LCDCTL_ACDOE_SPLSPR (0x10) #define GPIO_PAR_LCDCTL_ACDOE_GPIO (0x00) @@ -330,141 +328,141 @@ #define GPIO_PAR_LCDCTL_LSCLK (0x01) /* Bit definitions and macros for PAR_IRQ */ -#define GPIO_PAR_IRQ_IRQ4_MASK (0xF3) +#define GPIO_PAR_IRQ_IRQ4_UNMASK (0xF3) #define GPIO_PAR_IRQ_IRQ4_SSIINPCLK (0x0C) #define GPIO_PAR_IRQ_IRQ4_DMAREQ0 (0x08) #define GPIO_PAR_IRQ_IRQ4_GPIO (0x00) -#define GPIO_PAR_IRQ_IRQ1_MASK (0xFC) +#define GPIO_PAR_IRQ_IRQ1_UNMASK (0xFC) #define GPIO_PAR_IRQ_IRQ1_PCIINT (0x03) #define GPIO_PAR_IRQ_IRQ1_USBCLKIN (0x02) #define GPIO_PAR_IRQ_IRQ1_SSICLKIN (0x01) #define GPIO_PAR_IRQ_IRQ1_GPIO (0x00) /* Bit definitions and macros for GPIO_PAR_LCDH */ -#define GPIO_PAR_LCDH_LD17_MASK (0xFFFFF3FF) +#define GPIO_PAR_LCDH_LD17_UNMASK (0xFFFFF3FF) #define GPIO_PAR_LCDH_LD17_LD17 (0x00000C00) #define GPIO_PAR_LCDH_LD17_LD11 (0x00000800) #define GPIO_PAR_LCDH_LD17_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD16_MASK (0xFFFFFCFF) +#define GPIO_PAR_LCDH_LD16_UNMASK (0xFFFFFCFF) #define GPIO_PAR_LCDH_LD16_LD16 (0x00000300) #define GPIO_PAR_LCDH_LD16_LD10 (0x00000200) #define GPIO_PAR_LCDH_LD16_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD15_MASK (0xFFFFFF3F) +#define GPIO_PAR_LCDH_LD15_UNMASK (0xFFFFFF3F) #define GPIO_PAR_LCDH_LD15_LD15 (0x000000C0) #define GPIO_PAR_LCDH_LD15_LD9 (0x00000080) #define GPIO_PAR_LCDH_LD15_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD14_MASK (0xFFFFFFCF) +#define GPIO_PAR_LCDH_LD14_UNMASK (0xFFFFFFCF) #define GPIO_PAR_LCDH_LD14_LD14 (0x00000030) #define GPIO_PAR_LCDH_LD14_LD8 (0x00000020) #define GPIO_PAR_LCDH_LD14_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD13_MASK (0xFFFFFFF3) +#define GPIO_PAR_LCDH_LD13_UNMASK (0xFFFFFFF3) #define GPIO_PAR_LCDH_LD13_LD13 (0x0000000C) #define GPIO_PAR_LCDH_LD13_CANTX (0x00000008) #define GPIO_PAR_LCDH_LD13_GPIO (0x00000000) -#define GPIO_PAR_LCDH_LD12_MASK (0xFFFFFFFC) +#define GPIO_PAR_LCDH_LD12_UNMASK (0xFFFFFFFC) #define GPIO_PAR_LCDH_LD12_LD12 (0x00000003) #define GPIO_PAR_LCDH_LD12_CANRX (0x00000002) #define GPIO_PAR_LCDH_LD12_GPIO (0x00000000) /* Bit definitions and macros for GPIO_PAR_LCDL */ -#define GPIO_PAR_LCDL_LD11_MASK (0x3FFFFFFF) +#define GPIO_PAR_LCDL_LD11_UNMASK (0x3FFFFFFF) #define GPIO_PAR_LCDL_LD11_LD11 (0xC0000000) #define GPIO_PAR_LCDL_LD11_LD7 (0x80000000) #define GPIO_PAR_LCDL_LD11_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD10_MASK (0xCFFFFFFF) +#define GPIO_PAR_LCDL_LD10_UNMASK (0xCFFFFFFF) #define GPIO_PAR_LCDL_LD10_LD10 (0x30000000) #define GPIO_PAR_LCDL_LD10_LD6 (0x20000000) #define GPIO_PAR_LCDL_LD10_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD9_MASK (0xF3FFFFFF) +#define GPIO_PAR_LCDL_LD9_UNMASK (0xF3FFFFFF) #define GPIO_PAR_LCDL_LD9_LD9 (0x0C000000) #define GPIO_PAR_LCDL_LD9_LD5 (0x08000000) #define GPIO_PAR_LCDL_LD9_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD8_MASK (0xFCFFFFFF) +#define GPIO_PAR_LCDL_LD8_UNMASK (0xFCFFFFFF) #define GPIO_PAR_LCDL_LD8_LD8 (0x03000000) #define GPIO_PAR_LCDL_LD8_LD4 (0x02000000) #define GPIO_PAR_LCDL_LD8_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD7_MASK (0xFF3FFFFF) +#define GPIO_PAR_LCDL_LD7_UNMASK (0xFF3FFFFF) #define GPIO_PAR_LCDL_LD7_LD7 (0x00C00000) #define GPIO_PAR_LCDL_LD7_PWM7 (0x00800000) #define GPIO_PAR_LCDL_LD7_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD6_MASK (0xFFCFFFFF) +#define GPIO_PAR_LCDL_LD6_UNMASK (0xFFCFFFFF) #define GPIO_PAR_LCDL_LD6_LD6 (0x00300000) #define GPIO_PAR_LCDL_LD6_PWM5 (0x00200000) #define GPIO_PAR_LCDL_LD6_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD5_MASK (0xFFF3FFFF) +#define GPIO_PAR_LCDL_LD5_UNMASK (0xFFF3FFFF) #define GPIO_PAR_LCDL_LD5_LD5 (0x000C0000) #define GPIO_PAR_LCDL_LD5_LD3 (0x00080000) #define GPIO_PAR_LCDL_LD5_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD4_MASK (0xFFFCFFFF) +#define GPIO_PAR_LCDL_LD4_UNMASK (0xFFFCFFFF) #define GPIO_PAR_LCDL_LD4_LD4 (0x00030000) #define GPIO_PAR_LCDL_LD4_LD2 (0x00020000) #define GPIO_PAR_LCDL_LD4_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD3_MASK (0xFFFF3FFF) +#define GPIO_PAR_LCDL_LD3_UNMASK (0xFFFF3FFF) #define GPIO_PAR_LCDL_LD3_LD3 (0x0000C000) #define GPIO_PAR_LCDL_LD3_LD1 (0x00008000) #define GPIO_PAR_LCDL_LD3_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD2_MASK (0xFFFFCFFF) +#define GPIO_PAR_LCDL_LD2_UNMASK (0xFFFFCFFF) #define GPIO_PAR_LCDL_LD2_LD2 (0x00003000) #define GPIO_PAR_LCDL_LD2_LD0 (0x00002000) #define GPIO_PAR_LCDL_LD2_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD1_MASK (0xFFFFF3FF) +#define GPIO_PAR_LCDL_LD1_UNMASK (0xFFFFF3FF) #define GPIO_PAR_LCDL_LD1_LD1 (0x00000C00) #define GPIO_PAR_LCDL_LD1_PWM3 (0x00000800) #define GPIO_PAR_LCDL_LD1_GPIO (0x00000000) -#define GPIO_PAR_LCDL_LD0_MASK (0xFFFFFCFF) +#define GPIO_PAR_LCDL_LD0_UNMASK (0xFFFFFCFF) #define GPIO_PAR_LCDL_LD0_LD0 (0x00000300) #define GPIO_PAR_LCDL_LD0_PWM1 (0x00000200) #define GPIO_PAR_LCDL_LD0_GPIO (0x00000000) /* Bit definitions and macros for MSCR_FB */ -#define GPIO_MSCR_FB_DUPPER_MASK (0xCF) +#define GPIO_MSCR_FB_DUPPER_UNMASK (0xCF) #define GPIO_MSCR_FB_DUPPER_25V_33V (0x30) #define GPIO_MSCR_FB_DUPPER_FULL_18V (0x20) #define GPIO_MSCR_FB_DUPPER_OD (0x10) #define GPIO_MSCR_FB_DUPPER_HALF_18V (0x00) -#define GPIO_MSCR_FB_DLOWER_MASK (0xF3) +#define GPIO_MSCR_FB_DLOWER_UNMASK (0xF3) #define GPIO_MSCR_FB_DLOWER_25V_33V (0x0C) #define GPIO_MSCR_FB_DLOWER_FULL_18V (0x08) #define GPIO_MSCR_FB_DLOWER_OD (0x04) #define GPIO_MSCR_FB_DLOWER_HALF_18V (0x00) -#define GPIO_MSCR_FB_ADDRCTL_MASK (0xFC) +#define GPIO_MSCR_FB_ADDRCTL_UNMASK (0xFC) #define GPIO_MSCR_FB_ADDRCTL_25V_33V (0x03) #define GPIO_MSCR_FB_ADDRCTL_FULL_18V (0x02) #define GPIO_MSCR_FB_ADDRCTL_OD (0x01) #define GPIO_MSCR_FB_ADDRCTL_HALF_18V (0x00) /* Bit definitions and macros for MSCR_SDRAM */ -#define GPIO_MSCR_SDRAM_SDCLKB_MASK (0xCF) +#define GPIO_MSCR_SDRAM_SDCLKB_UNMASK (0xCF) #define GPIO_MSCR_SDRAM_SDCLKB_25V_33V (0x30) #define GPIO_MSCR_SDRAM_SDCLKB_FULL_18V (0x20) #define GPIO_MSCR_SDRAM_SDCLKB_OD (0x10) #define GPIO_MSCR_SDRAM_SDCLKB_HALF_18V (0x00) -#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3) #define GPIO_MSCR_SDRAM_SDCLK_25V_33V (0x0C) #define GPIO_MSCR_SDRAM_SDCLK_FULL_18V (0x08) #define GPIO_MSCR_SDRAM_SDCLK_OPD (0x04) #define GPIO_MSCR_SDRAM_SDCLK_HALF_18V (0x00) -#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) +#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC) #define GPIO_MSCR_SDRAM_SDCTL_25V_33V (0x03) #define GPIO_MSCR_SDRAM_SDCTL_FULL_18V (0x02) #define GPIO_MSCR_SDRAM_SDCTL_OPD (0x01) diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h index 22987ac..71a40d3 100644 --- a/include/asm-m68k/m5235.h +++ b/include/asm-m68k/m5235.h @@ -557,8 +557,8 @@ #define CCM_RCON_MODE (0x0001) /* Bit definitions and macros for CCM_CIR */ -#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6) -#define CCM_CIR_PRN(x) ((x)&0x003F) +#define CCM_CIR_PIN(x) (((x) & 0xFFC0) >> 6) +#define CCM_CIR_PRN(x) ((x) & 0x003F) /********************************************************************* * PLL Clock Module diff --git a/include/asm-m68k/m5301x.h b/include/asm-m68k/m5301x.h index 80cefc4..0920a0d 100644 --- a/include/asm-m68k/m5301x.h +++ b/include/asm-m68k/m5301x.h @@ -254,7 +254,7 @@ #define CCM_MISCCR_PLL_LOCK (0x2000) #define CCM_MISCCR_LIMP (0x1000) #define CCM_MISCCR_BME (0x8000) -#define CCM_MISCCR_BMT_MASK (0xF8FF) +#define CCM_MISCCR_BMT_UNMASK (0xF8FF) #define CCM_MISCCR_BMT(x) (((x) & 0x0007) << 8) #define CCM_MISCCR_BMT_512 (0x0700) #define CCM_MISCCR_BMT_1024 (0x0600) @@ -330,32 +330,32 @@ #define GPIO_PAR_CS5 (0x40) #define GPIO_PAR_CS4 (0x10) -#define GPIO_PAR_CS1_MASK (0xF3) +#define GPIO_PAR_CS1_UNMASK (0xF3) #define GPIO_PAR_CS1_CS1 (0x0C) #define GPIO_PAR_CS1_SDCS1 (0x08) -#define GPIO_PAR_CS0_MASK (0xFC) +#define GPIO_PAR_CS0_UNMASK (0xFC) #define GPIO_PAR_CS0_CS0 (0x03) #define GPIO_PAR_CS0_CS4 (0x02) -#define GPIO_PAR_DSPIH_SIN_MASK (0x3F) +#define GPIO_PAR_DSPIH_SIN_UNMASK (0x3F) #define GPIO_PAR_DSPIH_SIN (0xC0) #define GPIO_PAR_DSPIH_SIN_U2RXD (0x80) -#define GPIO_PAR_DSPIH_SOUT_MASK (0xCF) +#define GPIO_PAR_DSPIH_SOUT_UNMASK (0xCF) #define GPIO_PAR_DSPIH_SOUT (0x30) #define GPIO_PAR_DSPIH_SOUT_U2TXD (0x20) -#define GPIO_PAR_DSPIH_SCK_MASK (0xF3) +#define GPIO_PAR_DSPIH_SCK_UNMASK (0xF3) #define GPIO_PAR_DSPIH_SCK (0x0C) #define GPIO_PAR_DSPIH_SCK_U2CTS (0x08) -#define GPIO_PAR_DSPIH_PCS0_MASK (0xFC) +#define GPIO_PAR_DSPIH_PCS0_UNMASK (0xFC) #define GPIO_PAR_DSPIH_PCS0 (0x03) #define GPIO_PAR_DSPIH_PCS0_U2RTS (0x02) -#define GPIO_PAR_DSPIL_PCS1_MASK (0x3F) +#define GPIO_PAR_DSPIL_PCS1_UNMASK (0x3F) #define GPIO_PAR_DSPIL_PCS1 (0xC0) -#define GPIO_PAR_DSPIL_PCS2_MASK (0xCF) +#define GPIO_PAR_DSPIL_PCS2_UNMASK (0xCF) #define GPIO_PAR_DSPIL_PCS2 (0x30) #define GPIO_PAR_DSPIL_PCS2_USBH_OC (0x20) -#define GPIO_PAR_DSPIL_PCS3_MASK (0xF3) +#define GPIO_PAR_DSPIL_PCS3_UNMASK (0xF3) #define GPIO_PAR_DSPIL_PCS3 (0x0C) #define GPIO_PAR_DSPIL_PCS3_USBH_EN (0x08) @@ -365,30 +365,30 @@ #define GPIO_PAR_FEC0_RMII_FEC (0x01) /* GPIO_PAR_FECI2C */ -#define GPIO_PAR_FECI2C_RMII0_MASK (0x3F) +#define GPIO_PAR_FECI2C_RMII0_UNMASK (0x3F) #define GPIO_PAR_FECI2C_MDC0 (0x80) #define GPIO_PAR_FECI2C_MDIO0 (0x40) -#define GPIO_PAR_FECI2C_RMII1_MASK (0xCF) +#define GPIO_PAR_FECI2C_RMII1_UNMASK (0xCF) #define GPIO_PAR_FECI2C_MDC1 (0x20) #define GPIO_PAR_FECI2C_MDIO1 (0x10) -#define GPIO_PAR_FECI2C_SDA_MASK (0xF3) +#define GPIO_PAR_FECI2C_SDA_UNMASK (0xF3) #define GPIO_PAR_FECI2C_SDA(x) (((x) & 0x03) << 2) #define GPIO_PAR_FECI2C_SDA_SDA (0x0C) #define GPIO_PAR_FECI2C_SDA_U2TXD (0x08) #define GPIO_PAR_FECI2C_SDA_MDIO1 (0x04) -#define GPIO_PAR_FECI2C_SCL_MASK (0xFC) +#define GPIO_PAR_FECI2C_SCL_UNMASK (0xFC) #define GPIO_PAR_FECI2C_SCL(x) ((x) & 0x03) #define GPIO_PAR_FECI2C_SCL_SCL (0x03) #define GPIO_PAR_FECI2C_SCL_U2RXD (0x02) #define GPIO_PAR_FECI2C_SCL_MDC1 (0x01) -#define GPIO_PAR_IRQ0H_IRQ07_MASK (0x3F) -#define GPIO_PAR_IRQ0H_IRQ06_MASK (0xCF) +#define GPIO_PAR_IRQ0H_IRQ07_UNMASK (0x3F) +#define GPIO_PAR_IRQ0H_IRQ06_UNMASK (0xCF) #define GPIO_PAR_IRQ0H_IRQ06_USBCLKIN (0x10) -#define GPIO_PAR_IRQ0H_IRQ04_MASK (0xFC) +#define GPIO_PAR_IRQ0H_IRQ04_UNMASK (0xFC) #define GPIO_PAR_IRQ0H_IRQ04_DREQ0 (0x02) -#define GPIO_PAR_IRQ0L_IRQ01_MASK (0xF3) +#define GPIO_PAR_IRQ0L_IRQ01_UNMASK (0xF3) #define GPIO_PAR_IRQ0L_IRQ01_DREQ1 (0x08) #define GPIO_PAR_IRQ1H_IRQ17_DDATA3 (0x40) @@ -401,24 +401,24 @@ #define GPIO_PAR_IRQ1L_IRQ11_PST1 (0x04) #define GPIO_PAR_IRQ1L_IRQ10_PST0 (0x01) -#define GPIO_PAR_SIMP1H_DATA1_MASK (0x3F) +#define GPIO_PAR_SIMP1H_DATA1_UNMASK (0x3F) #define GPIO_PAR_SIMP1H_DATA1_SIMDATA1 (0xC0) #define GPIO_PAR_SIMP1H_DATA1_SSITXD (0x80) #define GPIO_PAR_SIMP1H_DATA1_U1TXD (0x40) -#define GPIO_PAR_SIMP1H_VEN1_MASK (0xCF) +#define GPIO_PAR_SIMP1H_VEN1_UNMASK (0xCF) #define GPIO_PAR_SIMP1H_VEN1_SIMVEN1 (0x30) #define GPIO_PAR_SIMP1H_VEN1_SSIRXD (0x20) #define GPIO_PAR_SIMP1H_VEN1_U1RXD (0x10) -#define GPIO_PAR_SIMP1H_RST1_MASK (0xF3) +#define GPIO_PAR_SIMP1H_RST1_UNMASK (0xF3) #define GPIO_PAR_SIMP1H_RST1_SIMRST1 (0x0C) #define GPIO_PAR_SIMP1H_RST1_SSIFS (0x08) #define GPIO_PAR_SIMP1H_RST1_U1RTS (0x04) -#define GPIO_PAR_SIMP1H_PD1_MASK (0xFC) +#define GPIO_PAR_SIMP1H_PD1_UNMASK (0xFC) #define GPIO_PAR_SIMP1H_PD1_SIMPD1 (0x03) #define GPIO_PAR_SIMP1H_PD1_SSIBCLK (0x02) #define GPIO_PAR_SIMP1H_PD1_U1CTS (0x01) -#define GPIO_PAR_SIMP1L_CLK_MASK (0x3F) +#define GPIO_PAR_SIMP1L_CLK_UNMASK (0x3F) #define GPIO_PAR_SIMP1L_CLK_CLK1 (0xC0) #define GPIO_PAR_SIMP1L_CLK_SSIMCLK (0x80) @@ -432,19 +432,19 @@ #define GPIO_PAR_TIN2(x) (((x) & 0x03) << 4) #define GPIO_PAR_TIN1(x) (((x) & 0x03) << 2) #define GPIO_PAR_TIN0(x) ((x) & 0x03) -#define GPIO_PAR_TIN3_MASK (0x3F) +#define GPIO_PAR_TIN3_UNMASK (0x3F) #define GPIO_PAR_TIN3_TIN3 (0xC0) #define GPIO_PAR_TIN3_TOUT3 (0x80) #define GPIO_PAR_TIN3_IRQ03 (0x40) -#define GPIO_PAR_TIN2_MASK (0xCF) +#define GPIO_PAR_TIN2_UNMASK (0xCF) #define GPIO_PAR_TIN2_TIN2 (0x30) #define GPIO_PAR_TIN2_TOUT2 (0x20) #define GPIO_PAR_TIN2_IRQ02 (0x10) -#define GPIO_PAR_TIN1_MASK (0xF3) +#define GPIO_PAR_TIN1_UNMASK (0xF3) #define GPIO_PAR_TIN1_TIN1 (0x0C) #define GPIO_PAR_TIN1_TOUT1 (0x08) #define GPIO_PAR_TIN1_DACK1 (0x04) -#define GPIO_PAR_TIN0_MASK (0xFC) +#define GPIO_PAR_TIN0_UNMASK (0xFC) #define GPIO_PAR_TIN0_TIN0 (0x03) #define GPIO_PAR_TIN0_TOUT0 (0x02) #define GPIO_PAR_TIN0_CODEC_ALTCLK (0x01) @@ -455,10 +455,10 @@ #define GPIO_PAR_UART_U0RXD (0x10) #define GPIO_PAR_UART_RTS0(x) (((x) & 0x03) << 2) #define GPIO_PAR_UART_CTS0(x) ((x) & 0x03) -#define GPIO_PAR_UART_RTS0_MASK (0xF3) +#define GPIO_PAR_UART_RTS0_UNMASK (0xF3) #define GPIO_PAR_UART_RTS0_U0RTS (0x0C) #define GPIO_PAR_UART_RTS0_USBO_VBOC (0x08) -#define GPIO_PAR_UART_CTS0_MASK (0xFC) +#define GPIO_PAR_UART_CTS0_UNMASK (0xFC) #define GPIO_PAR_UART_CTS0_U0CTS (0x03) #define GPIO_PAR_UART_CTS0_USB0_VBEN (0x02) #define GPIO_PAR_UART_CTS0_USB_PULLUP (0x01) @@ -476,20 +476,20 @@ #define GPIO_PAR_SSIH_TXD(x) (((x) & 0x03) << 4) #define GPIO_PAR_SSIH_FS(x) (((x) & 0x03) << 2) #define GPIO_PAR_SSIH_MCLK(x) ((x) & 0x03) -#define GPIO_PAR_SSIH_RXD_MASK (0x3F) +#define GPIO_PAR_SSIH_RXD_UNMASK (0x3F) #define GPIO_PAR_SSIH_RXD_SSIRXD (0xC0) #define GPIO_PAR_SSIH_RXD_U1RXD (0x40) -#define GPIO_PAR_SSIH_TXD_MASK (0xCF) +#define GPIO_PAR_SSIH_TXD_UNMASK (0xCF) #define GPIO_PAR_SSIH_TXD_SSIRXD (0x30) #define GPIO_PAR_SSIH_TXD_U1TXD (0x10) -#define GPIO_PAR_SSIH_FS_MASK (0xF3) +#define GPIO_PAR_SSIH_FS_UNMASK (0xF3) #define GPIO_PAR_SSIH_FS_SSIFS (0x0C) #define GPIO_PAR_SSIH_FS_U1RTS (0x04) -#define GPIO_PAR_SSIH_MCLK_MASK (0xFC) +#define GPIO_PAR_SSIH_MCLK_UNMASK (0xFC) #define GPIO_PAR_SSIH_MCLK_SSIMCLK (0x03) #define GPIO_PAR_SSIH_MCLK_SSICLKIN (0x01) -#define GPIO_PAR_SSIL_MASK (0x3F) +#define GPIO_PAR_SSIL_UNMASK (0x3F) #define GPIO_PAR_SSIL_BCLK (0xC0) #define GPIO_PAR_SSIL_U1CTS (0x40) @@ -497,40 +497,40 @@ #define GPIO_MSCR_MSCR2(x) (((x) & 0x07) << 5) #define GPIO_MSCR_MSCR3(x) (((x) & 0x07) << 5) #define GPIO_MSCR_MSCR4(x) (((x) & 0x07) << 5) -#define GPIO_MSCR_MSCRn_MASK (0x1F) +#define GPIO_MSCR_MSCRn_UNMASK (0x1F) #define GPIO_MSCR_MSCRn_SDR (0xE0) #define GPIO_MSCR_MSCRn_25VDDR (0x60) #define GPIO_MSCR_MSCRn_18VDDR_FULL (0x20) #define GPIO_MSCR_MSCRn_18VDDR_HALF (0x00) #define GPIO_MSCR_MSCR5(x) (((x) & 0x07) << 2) -#define GPIO_MSCR_MSCR5_MASK (0xE3) +#define GPIO_MSCR_MSCR5_UNMASK (0xE3) #define GPIO_MSCR_MSCR5_SDR (0x1C) #define GPIO_MSCR_MSCR5_25VDDR (0x0C) #define GPIO_MSCR_MSCR5_18VDDR_FULL (0x04) #define GPIO_MSCR_MSCR5_18VDDR_HALF (0x00) -#define GPIO_SRCR_DSPI_MASK (0xFC) +#define GPIO_SRCR_DSPI_UNMASK (0xFC) #define GPIO_SRCR_DSPI(x) ((x) & 0x03) -#define GPIO_SRCR_I2C_MASK (0xFC) +#define GPIO_SRCR_I2C_UNMASK (0xFC) #define GPIO_SRCR_I2C(x) ((x) & 0x03) -#define GPIO_SRCR_IRQ_IRQ0_MASK (0xF3) +#define GPIO_SRCR_IRQ_IRQ0_UNMASK (0xF3) #define GPIO_SRCR_IRQ_IRQ0(x) (((x) & 0x03) << 2) -#define GPIO_SRCR_IRQ_IRQ1DBG_MASK (0xFC) +#define GPIO_SRCR_IRQ_IRQ1DBG_UNMASK (0xFC) #define GPIO_SRCR_IRQ_IRQ1DBG(x) ((x) & 0x03) -#define GPIO_SRCR_SIM_SIMP0_MASK (0xF3) +#define GPIO_SRCR_SIM_SIMP0_UNMASK (0xF3) #define GPIO_SRCR_SIM_SIMP0(x) (((x) & 0x03) << 2) -#define GPIO_SRCR_SIM_SIMP1_MASK (0xFC) +#define GPIO_SRCR_SIM_SIMP1_UNMASK (0xFC) #define GPIO_SRCR_SIM_SIMP1(x) ((x) & 0x03) -#define GPIO_SRCR_TIMER_MASK (0xFC) +#define GPIO_SRCR_TIMER_UNMASK (0xFC) #define GPIO_SRCR_TIMER(x) ((x) & 0x03) -#define GPIO_SRCR_UART2_MASK (0xF3) +#define GPIO_SRCR_UART2_UNMASK (0xF3) #define GPIO_SRCR_UART2(x) (((x) & 0x03) << 2) -#define GPIO_SRCR_UART0_MASK (0xFC) +#define GPIO_SRCR_UART0_UNMASK (0xFC) #define GPIO_SRCR_UART0(x) ((x) & 0x03) -#define GPIO_SRCR_SDHC_MASK (0xFC) +#define GPIO_SRCR_SDHC_UNMASK (0xFC) #define GPIO_SRCR_SDHC(x) ((x) & 0x03) -#define GPIO_SRCR_SSI_MASK (0xFC) +#define GPIO_SRCR_SSI_UNMASK (0xFC) #define GPIO_SRCR_SSI(x) ((x) & 0x03) #define SRCR_HIGHEST (0x03) @@ -538,11 +538,11 @@ #define SRCR_LOW (0x01) #define SRCR_LOWEST (0x00) -#define GPIO_DSCR_FEC_RMIICLK_MASK (0xCF) +#define GPIO_DSCR_FEC_RMIICLK_UNMASK (0xCF) #define GPIO_DSCR_FEC_RMIICLK(x) (((x) & 0x03) << 4) -#define GPIO_DSCR_FEC_RMII0_MASK (0xF3) +#define GPIO_DSCR_FEC_RMII0_UNMASK (0xF3) #define GPIO_DSCR_FEC_RMII0(x) (((x) & 0x03) << 2) -#define GPIO_DSCR_FEC_RMII1_MASK (0xFC) +#define GPIO_DSCR_FEC_RMII1_UNMASK (0xFC) #define GPIO_DSCR_FEC_RMII1(x) ((x) & 0x03) #define DSCR_50PF (0x03) @@ -572,18 +572,18 @@ #define PLL_PCR_LOL_IRQ (0x00004000) #define PLL_PCR_LOL_RE (0x00002000) #define PLL_PCR_LOL_EN (0x00001000) -#define PLL_PCR_REFDIV_MASK (0xFFFFF8FF) +#define PLL_PCR_REFDIV_UNMASK (0xFFFFF8FF) #define PLL_PCR_REFDIV(x) (((x) & 0x07) << 8) -#define PLL_PCR_FBDIV_MASK (0xFFFFFFC0) +#define PLL_PCR_FBDIV_UNMASK (0xFFFFFFC0) #define PLL_PCR_FBDIV(x) ((x) & 0x3F) -#define PLL_PDR_OUTDIV4_MASK (0x0FFF) +#define PLL_PDR_OUTDIV4_UNMASK (0x0FFF) #define PLL_PDR_OUTDIV4(x) (((x) & 0x0000000F) << 12) -#define PLL_PDR_OUTDIV3_MASK (0xF0FF) +#define PLL_PDR_OUTDIV3_UNMASK (0xF0FF) #define PLL_PDR_OUTDIV3(x) (((x) & 0x0000000F) << 8) -#define PLL_PDR_OUTDIV2_MASK (0xFF0F) +#define PLL_PDR_OUTDIV2_UNMASK (0xFF0F) #define PLL_PDR_OUTDIV2(x) (((x) & 0x0000000F) << 4) -#define PLL_PDR_OUTDIV1_MASK (0xFFF0) +#define PLL_PDR_OUTDIV1_UNMASK (0xFFF0) #define PLL_PDR_OUTDIV1(x) ((x) & 0x0000000F) #define PLL_PDR_USB(x) PLL_PDR_OUTDIV4(x) #define PLL_PDR_SDRAM(x) PLL_PDR_OUTDIV3(x) diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h index 5966621..dfddde6 100644 --- a/include/asm-m68k/m5445x.h +++ b/include/asm-m68k/m5445x.h @@ -286,13 +286,13 @@ /* Bit definitions and macros for PAR_FEC */ #define GPIO_PAR_FEC_FEC0(x) (((x)&0x07)) #define GPIO_PAR_FEC_FEC1(x) (((x)&0x07)<<4) -#define GPIO_PAR_FEC_FEC1_MASK (0x8F) +#define GPIO_PAR_FEC_FEC1_UNMASK (0x8F) #define GPIO_PAR_FEC_FEC1_MII (0x70) #define GPIO_PAR_FEC_FEC1_RMII_GPIO (0x30) #define GPIO_PAR_FEC_FEC1_RMII_ATA (0x20) #define GPIO_PAR_FEC_FEC1_ATA (0x10) #define GPIO_PAR_FEC_FEC1_GPIO (0x00) -#define GPIO_PAR_FEC_FEC0_MASK (0xF8) +#define GPIO_PAR_FEC_FEC0_UNMASK (0xF8) #define GPIO_PAR_FEC_FEC0_MII (0x07) #define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) #define GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02) @@ -304,15 +304,15 @@ #define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<2) #define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<4) #define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6) -#define GPIO_PAR_DMA_DACK1_MASK (0x3F) +#define GPIO_PAR_DMA_DACK1_UNMASK (0x3F) #define GPIO_PAR_DMA_DACK1_DACK1 (0xC0) #define GPIO_PAR_DMA_DACK1_ULPI_DIR (0x40) #define GPIO_PAR_DMA_DACK1_GPIO (0x00) -#define GPIO_PAR_DMA_DREQ1_MASK (0xCF) +#define GPIO_PAR_DMA_DREQ1_UNMASK (0xCF) #define GPIO_PAR_DMA_DREQ1_DREQ1 (0x30) #define GPIO_PAR_DMA_DREQ1_USB_CLKIN (0x10) #define GPIO_PAR_DMA_DREQ1_GPIO (0x00) -#define GPIO_PAR_DMA_DACK0_MASK (0xF3) +#define GPIO_PAR_DMA_DACK0_UNMASK (0xF3) #define GPIO_PAR_DMA_DACK0_DACK1 (0x0C) #define GPIO_PAR_DMA_DACK0_ULPI_DIR (0x04) #define GPIO_PAR_DMA_DACK0_GPIO (0x00) @@ -330,7 +330,7 @@ #define GPIO_PAR_FBCTL_TA_GPIO (0x00) #define GPIO_PAR_FBCTL_RW_RW (0x20) #define GPIO_PAR_FBCTL_RW_GPIO (0x00) -#define GPIO_PAR_FBCTL_TS_MASK (0xE7) +#define GPIO_PAR_FBCTL_TS_UNMASK (0xE7) #define GPIO_PAR_FBCTL_TS_TS (0x18) #define GPIO_PAR_FBCTL_TS_ALE (0x10) #define GPIO_PAR_FBCTL_TS_TBST (0x08) @@ -364,11 +364,11 @@ #define GPIO_PAR_BE_BS1 (0x04) #define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) #define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) -#define GPIO_PAR_BE_BE3_MASK (0x3F) +#define GPIO_PAR_BE_BE3_UNMASK (0x3F) #define GPIO_PAR_BE_BE3_BE3 (0xC0) #define GPIO_PAR_BE_BE3_TSIZ1 (0x80) #define GPIO_PAR_BE_BE3_GPIO (0x00) -#define GPIO_PAR_BE_BE2_MASK (0xCF) +#define GPIO_PAR_BE_BE2_UNMASK (0xCF) #define GPIO_PAR_BE_BE2_BE2 (0x30) #define GPIO_PAR_BE_BE2_TSIZ0 (0x20) #define GPIO_PAR_BE_BE2_GPIO (0x00) @@ -393,22 +393,22 @@ #define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) #define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) #define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) -#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_UNMASK (0x3F) #define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) #define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) #define GPIO_PAR_TIMER_T3IN_U2RXD (0x40) #define GPIO_PAR_TIMER_T3IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_UNMASK (0xCF) #define GPIO_PAR_TIMER_T2IN_T2IN (0x30) #define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) #define GPIO_PAR_TIMER_T2IN_U2TXD (0x10) #define GPIO_PAR_TIMER_T2IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_UNMASK (0xF3) #define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) #define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) #define GPIO_PAR_TIMER_T1IN_U2CTS (0x04) #define GPIO_PAR_TIMER_T1IN_GPIO (0x00) -#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_UNMASK (0xFC) #define GPIO_PAR_TIMER_T0IN_T0IN (0x03) #define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) #define GPIO_PAR_TIMER_T0IN_U2RTS (0x01) @@ -417,12 +417,12 @@ /* Bit definitions and macros for PAR_USB */ #define GPIO_PAR_USB_VBUSOC(x) (((x)&0x03)) #define GPIO_PAR_USB_VBUSEN(x) (((x)&0x03)<<2) -#define GPIO_PAR_USB_VBUSEN_MASK (0xF3) +#define GPIO_PAR_USB_VBUSEN_UNMASK (0xF3) #define GPIO_PAR_USB_VBUSEN_VBUSEN (0x0C) #define GPIO_PAR_USB_VBUSEN_USBPULLUP (0x08) #define GPIO_PAR_USB_VBUSEN_ULPI_NXT (0x04) #define GPIO_PAR_USB_VBUSEN_GPIO (0x00) -#define GPIO_PAR_USB_VBUSOC_MASK (0xFC) +#define GPIO_PAR_USB_VBUSOC_UNMASK (0xFC) #define GPIO_PAR_USB_VBUSOC_VBUSOC (0x03) #define GPIO_PAR_USB_VBUSOC_ULPI_STP (0x01) #define GPIO_PAR_USB_VBUSOC_GPIO (0x00) @@ -460,11 +460,11 @@ #define GPIO_PAR_FECI2C_MDC0 (0x0040) #define GPIO_PAR_FECI2C_MDIO1(x) (((x)&0x0003)<<8) #define GPIO_PAR_FECI2C_MDC1(x) (((x)&0x0003)<<10) -#define GPIO_PAR_FECI2C_MDC1_MASK (0xF3FF) +#define GPIO_PAR_FECI2C_MDC1_UNMASK (0xF3FF) #define GPIO_PAR_FECI2C_MDC1_MDC1 (0x0C00) #define GPIO_PAR_FECI2C_MDC1_ATA_DIOR (0x0800) #define GPIO_PAR_FECI2C_MDC1_GPIO (0x0000) -#define GPIO_PAR_FECI2C_MDIO1_MASK (0xFCFF) +#define GPIO_PAR_FECI2C_MDIO1_UNMASK (0xFCFF) #define GPIO_PAR_FECI2C_MDIO1_MDIO1 (0x0300) #define GPIO_PAR_FECI2C_MDIO1_ATA_DIOW (0x0200) #define GPIO_PAR_FECI2C_MDIO1_GPIO (0x0000) @@ -472,11 +472,11 @@ #define GPIO_PAR_FECI2C_MDC0_GPIO (0x0000) #define GPIO_PAR_FECI2C_MDIO0_MDIO0 (0x0010) #define GPIO_PAR_FECI2C_MDIO0_GPIO (0x0000) -#define GPIO_PAR_FECI2C_SCL_MASK (0xFFF3) +#define GPIO_PAR_FECI2C_SCL_UNMASK (0xFFF3) #define GPIO_PAR_FECI2C_SCL_SCL (0x000C) #define GPIO_PAR_FECI2C_SCL_U2TXD (0x0004) #define GPIO_PAR_FECI2C_SCL_GPIO (0x0000) -#define GPIO_PAR_FECI2C_SDA_MASK (0xFFFC) +#define GPIO_PAR_FECI2C_SDA_UNMASK (0xFFFC) #define GPIO_PAR_FECI2C_SDA_SDA (0x0003) #define GPIO_PAR_FECI2C_SDA_U2RXD (0x0001) #define GPIO_PAR_FECI2C_SDA_GPIO (0x0000) @@ -487,19 +487,19 @@ #define GPIO_PAR_SSI_SRXD(x) (((x)&0x0003)<<4) #define GPIO_PAR_SSI_FS(x) (((x)&0x0003)<<6) #define GPIO_PAR_SSI_BCLK(x) (((x)&0x0003)<<8) -#define GPIO_PAR_SSI_BCLK_MASK (0xFCFF) +#define GPIO_PAR_SSI_BCLK_UNMASK (0xFCFF) #define GPIO_PAR_SSI_BCLK_BCLK (0x0300) #define GPIO_PAR_SSI_BCLK_U1CTS (0x0200) #define GPIO_PAR_SSI_BCLK_GPIO (0x0000) -#define GPIO_PAR_SSI_FS_MASK (0xFF3F) +#define GPIO_PAR_SSI_FS_UNMASK (0xFF3F) #define GPIO_PAR_SSI_FS_FS (0x00C0) #define GPIO_PAR_SSI_FS_U1RTS (0x0080) #define GPIO_PAR_SSI_FS_GPIO (0x0000) -#define GPIO_PAR_SSI_SRXD_MASK (0xFFCF) +#define GPIO_PAR_SSI_SRXD_UNMASK (0xFFCF) #define GPIO_PAR_SSI_SRXD_SRXD (0x0030) #define GPIO_PAR_SSI_SRXD_U1RXD (0x0020) #define GPIO_PAR_SSI_SRXD_GPIO (0x0000) -#define GPIO_PAR_SSI_STXD_MASK (0xFFF3) +#define GPIO_PAR_SSI_STXD_UNMASK (0xFFF3) #define GPIO_PAR_SSI_STXD_STXD (0x000C) #define GPIO_PAR_SSI_STXD_U1TXD (0x0008) #define GPIO_PAR_SSI_STXD_GPIO (0x0000) @@ -552,7 +552,7 @@ #define GPIO_PAR_PCI_GNT1 (0x0400) #define GPIO_PAR_PCI_GNT2 (0x1000) #define GPIO_PAR_PCI_GNT3(x) (((x)&0x0003)<<14) -#define GPIO_PAR_PCI_GNT3_MASK (0x3FFF) +#define GPIO_PAR_PCI_GNT3_UNMASK (0x3FFF) #define GPIO_PAR_PCI_GNT3_GNT3 (0xC000) #define GPIO_PAR_PCI_GNT3_ATA_DMACK (0x8000) #define GPIO_PAR_PCI_GNT3_GPIO (0x0000) @@ -562,7 +562,7 @@ #define GPIO_PAR_PCI_GNT1_GPIO (0x0000) #define GPIO_PAR_PCI_GNT0_GNT0 (0x0100) #define GPIO_PAR_PCI_GNT0_GPIO (0x0000) -#define GPIO_PAR_PCI_REQ3_MASK (0xFF3F) +#define GPIO_PAR_PCI_REQ3_UNMASK (0xFF3F) #define GPIO_PAR_PCI_REQ3_REQ3 (0x00C0) #define GPIO_PAR_PCI_REQ3_ATA_INTRQ (0x0080) #define GPIO_PAR_PCI_REQ3_GPIO (0x0000) @@ -578,22 +578,22 @@ #define GPIO_MSCR_SDRAM_SDCLK(x) (((x)&0x03)<<2) #define GPIO_MSCR_SDRAM_SDDQS(x) (((x)&0x03)<<4) #define GPIO_MSCR_SDRAM_SDDATA(x) (((x)&0x03)<<6) -#define GPIO_MSCR_SDRAM_SDDATA_MASK (0x3F) +#define GPIO_MSCR_SDRAM_SDDATA_UNMASK (0x3F) #define GPIO_MSCR_SDRAM_SDDATA_DDR1 (0xC0) #define GPIO_MSCR_SDRAM_SDDATA_DDR2 (0x80) #define GPIO_MSCR_SDRAM_SDDATA_FS_LPDDR (0x40) #define GPIO_MSCR_SDRAM_SDDATA_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDDQS_MASK (0xCF) +#define GPIO_MSCR_SDRAM_SDDQS_UNMASK (0xCF) #define GPIO_MSCR_SDRAM_SDDQS_DDR1 (0x30) #define GPIO_MSCR_SDRAM_SDDQS_DDR2 (0x20) #define GPIO_MSCR_SDRAM_SDDQS_FS_LPDDR (0x10) #define GPIO_MSCR_SDRAM_SDDQS_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDCLK_MASK (0xF3) +#define GPIO_MSCR_SDRAM_SDCLK_UNMASK (0xF3) #define GPIO_MSCR_SDRAM_SDCLK_DDR1 (0x0C) #define GPIO_MSCR_SDRAM_SDCLK_DDR2 (0x08) #define GPIO_MSCR_SDRAM_SDCLK_FS_LPDDR (0x04) #define GPIO_MSCR_SDRAM_SDCLK_HS_LPDDR (0x00) -#define GPIO_MSCR_SDRAM_SDCTL_MASK (0xFC) +#define GPIO_MSCR_SDRAM_SDCTL_UNMASK (0xFC) #define GPIO_MSCR_SDRAM_SDCTL_DDR1 (0x03) #define GPIO_MSCR_SDRAM_SDCTL_DDR2 (0x02) #define GPIO_MSCR_SDRAM_SDCTL_FS_LPDDR (0x01) diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 8c5a742..44befe9 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -471,13 +471,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) -# define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -# define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -# define CONFIG_SYS_HID0_INIT 0 -# define CONFIG_SYS_HID0_FINAL 0 -#endif +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index a0b27a8..880cb4e 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -208,6 +208,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DBWE | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 5ef0b77..5d3a744 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -30,6 +30,7 @@ */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ #define CONFIG_ICECUBE 1 /* ... on IceCube board */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -47,7 +48,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -77,10 +77,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#else -#define CONFIG_MII 1 -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -169,7 +165,6 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ @@ -178,7 +173,6 @@ #else #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ #endif -#endif /* CONFIG_MPC5200 */ /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 @@ -338,13 +332,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #if defined(CONFIG_LITE5200B) #define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 32123d2..e6632ac 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -158,7 +158,7 @@ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ #define CONFIG_SYS_SDRAM_CFG1 0x43711630 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 #define CONFIG_SYS_SDRAM_CTRL 0xE1002000 @@ -207,6 +207,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Chipselect bank definitions */ /* * CS0 - NOR Flash diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 1801d9d..6c6b5d6 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -302,6 +302,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 2b816ce..5c0dc84 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -237,6 +237,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index e3830e5..33ac285 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -60,6 +60,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #undef CONFIG_CMD_NET #define CONFIG_SYS_PROMPT "=> " @@ -165,6 +166,20 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(2) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 5e86e4c..b5af493 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -57,6 +57,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS #define CONFIG_CMD_EXT2 @@ -95,11 +96,6 @@ # define DM9000_DATA (CONFIG_DM9000_BASE + 4) # undef CONFIG_DM9000_DEBUG -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_IPADDR 10.82.121.249 -# define CONFIG_NETMASK 255.255.252.0 -# define CONFIG_SERVERIP 10.82.120.80 -# define CONFIG_GATEWAYIP 10.82.123.254 # define CONFIG_OVERWRITE_ETHADDR_ONCE # define CONFIG_EXTRA_ENV_SETTINGS \ @@ -109,9 +105,9 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 2ffff;" \ - "era 0 2ffff;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ + "prog=prot off 0xff800000 0xff82ffff;" \ + "era 0xff800000 0xff82ffff;" \ + "cp.b ${loadaddr} 0xff800000 ${filesize};" \ "save\0" \ "" #endif @@ -231,6 +227,20 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(8) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index df6970c..206d115 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -64,6 +64,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #undef CONFIG_CMD_NET #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS @@ -179,6 +180,20 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ + CF_ADDRMASK(2) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 50b3ab2..798949c 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -72,6 +72,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_NET #define CONFIG_CMD_MII @@ -229,6 +230,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Chip Select 0 : Boot Flash */ #define CONFIG_SYS_CS0_BASE 0xFFE00000 #define CONFIG_SYS_CS0_MASK 0x001F0001 diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index f824158..f704bb3 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -74,6 +74,7 @@ */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_CMD_PING @@ -211,6 +212,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index b380159..981670a 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -72,6 +72,7 @@ /* Available command configuration */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -121,11 +122,6 @@ #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) -#ifdef CONFIG_MCFFEC -#define CONFIG_ETHADDR 00:06:3b:01:41:55 -#define CONFIG_ETH1ADDR 00:0e:0c:bc:e5:60 -#endif - #define CONFIG_SYS_PROMPT "-> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -145,6 +141,23 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 +#ifdef CONFIG_MCFFEC +# define CONFIG_NET_RETRY_COUNT 5 +# define CONFIG_OVERWRITE_ETHADDR_ONCE +#endif /* FEC_ENET */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "loadaddr=10000\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${uboot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b ${loadaddr} ffe00000 ${filesize};"\ + "save\0" \ + "" + #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 150000000 @@ -208,6 +221,19 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 15590cf..6e0aa14 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -64,6 +64,7 @@ * Command line configuration. */ #include +#define CONFIG_CMD_CACHE #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_MII @@ -209,6 +210,18 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DBWE | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 30855bd..d983a8f 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -69,6 +69,8 @@ # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY # define CONFIG_SYS_RX_ETH_BUFFER 8 +# define CONFIG_SYS_TX_ETH_BUFFER 8 +# define CONFIG_SYS_FEC_BUF_USE_SRAM # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_HAS_ETH1 @@ -166,7 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_END 0x20000 /* End of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x21 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -180,7 +182,7 @@ #define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ #define CONFIG_SYS_SDRAM_CFG1 0x43711630 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 -#define CONFIG_SYS_SDRAM_CTRL 0xE1002000 +#define CONFIG_SYS_SDRAM_CTRL 0xE1092000 #define CONFIG_SYS_SDRAM_EMOD 0x80010000 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 @@ -231,6 +233,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 8180c05..159b178 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -237,6 +237,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 8652a80..af1988c 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -237,6 +237,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index a5acfd2..a80d330 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -309,6 +309,21 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 7737284..5b4bba8 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -279,7 +279,7 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) @@ -408,6 +408,21 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 4534002..d007766 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -286,6 +286,22 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ + CF_CACR_IDCM) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ + CF_CACR_IEC | CF_CACR_ICINVA) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 971cb67..f23b8b0 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -272,6 +272,22 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ + CF_CACR_IDCM) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ + CF_CACR_IEC | CF_CACR_ICINVA) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + /*----------------------------------------------------------------------- * Chipselect bank definitions */ diff --git a/include/configs/PM520.h b/include/configs/PM520.h index f9687d2..22de207 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -50,7 +50,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -75,7 +74,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #undef CONFIG_NS8382X -#endif /* Partitions */ #define CONFIG_DOS_PARTITION @@ -111,9 +109,7 @@ #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB -#if defined(CONFIG_MPC5200) #define CONFIG_CMD_PCI -#endif /* @@ -147,12 +143,10 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -301,13 +295,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #if defined(CONFIG_BOOT_ROM) #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_BOOTROM_BASE diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 25f3a26..b69f015 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -252,6 +252,17 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ + CF_CACR_DBWE) + /*----------------------------------------------------------------------- * Memory bank definitions */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 3438aba..6da18eb 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -430,13 +430,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 2154c78..107bff1 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -633,13 +633,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 1daa574..7510ab1 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -41,6 +41,7 @@ */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ #define CONFIG_TOTAL5200 1 /* ... on Total5200 board */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -73,7 +74,6 @@ #define CONFIG_SPLASH_SCREEN -#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -98,12 +98,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#else /* MGT5100 */ - -#define CONFIG_MII 1 - -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -127,9 +121,7 @@ */ #include -#if defined(CONFIG_MPC5200) - #define CONFIG_CMD_PCI -#endif +#define CONFIG_CMD_PCI #define CONFIG_CMD_BMP #define CONFIG_CMD_EEPROM @@ -176,12 +168,10 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration @@ -326,17 +316,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif - -#if defined (CONFIG_MGT5100) -# define CONFIG_BOARD_EARLY_INIT_R /* switch from CS_BOOT to CS0 */ -#endif #if CONFIG_TOTAL5200_REV==1 # define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE diff --git a/include/configs/aev.h b/include/configs/aev.h index 2b4826d..98958a6 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -362,13 +362,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h new file mode 100644 index 0000000..7c8281c --- /dev/null +++ b/include/configs/astro_mcf5373l.h @@ -0,0 +1,400 @@ +/* + * Configuration settings for the Sentec Cobra Board. + * + * (C) Copyright 2003 Josef Baumgartner + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * configuration for ASTRO "Urmel" board. + * Originating from Cobra5272 configuration, messed up by + * Wolfgang Wegner + * Please do not bother the original author with bug reports + * concerning this file. + */ + +#ifndef _CONFIG_ASTRO_MCF5373L_H +#define _CONFIG_ASTRO_MCF5373L_H + +/* + * set the card type to actually compile for; either of + * the possibilities listed below has to be used! + */ +#define CONFIG_ASTRO_V532 1 + +#if CONFIG_ASTRO_V532 +#define ASTRO_ID 0xF8 +#elif CONFIG_ASTRO_V512 +#define ASTRO_ID 0xFA +#elif CONFIG_ASTRO_TWIN7S2 +#define ASTRO_ID 0xF9 +#elif CONFIG_ASTRO_V912 +#define ASTRO_ID 0xFC +#elif CONFIG_ASTRO_COFDMDUOS2 +#define ASTRO_ID 0xFB +#else +#error No card type defined! +#endif + +/* + * Define processor + * possible values for Urmel board: only Coldfire M5373 processor supported + * (please do not change) + */ + +/* it seems not clear yet which processor defines we should use */ +#define CONFIG_MCF537x /* define processor family */ +#define CONFIG_MCF532x /* define processor family */ +#define CONFIG_M5373 /* define processor type */ +#define CONFIG_ASTRO5373L /* define board type */ + +/* Command line configuration */ +#include + +/* + * CONFIG_MK_RAM defines if u-boot is loaded via BDM (or started from + * a different bootloader that has already performed RAM setup) or + * started directly from flash, which is the regular case for production + * boards. + */ +#ifdef CONFIG_MK_RAM +#define CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_TEXT_BASE 0x40020000 +#define ENABLE_JFFS 0 +#else +#define CONFIG_TEXT_BASE 0x00000000 +#define ENABLE_JFFS 1 +#endif + +/* Define which commmands should be available at u-boot command prompt */ + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_XIMG +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#if ENABLE_JFFS +#define CONFIG_CMD_JFFS2 +#endif +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_FPGA +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_MCFRTC +#undef RTC_DEBUG + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +/* + * Defines processor clock - important for correct timings concerning serial + * interface etc. + * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms + */ + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_CLK 80000000 +#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3) +#define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ + +#define CONFIG_SYS_CORE_SRAM_SIZE 0x8000 +#define CONFIG_SYS_CORE_SRAM 0x80000000 + +#define CONFIG_SYS_UNIFY_CACHE + +/* + * Define baudrate for UART1 (console output, tftp, ...) + * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud + * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected + * in u-boot command interface + */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (2) +#define CONFIG_SYS_UART2_ALT3_GPIO + +/* + * Watchdog configuration; Watchdog is disabled for running from RAM + * and set to highest possible value else. Beware there is no check + * in the watchdog code to validate the timeout value set here! + */ + +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 3355 /* timeout in milliseconds */ +#endif + +/* + * Configuration for environment + * Environment is located in the last sector of the flash + */ + +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_ENV_OFFSET 0x1FF8000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_IN_FLASH 1 +#else +/* + * environment in RAM - This is used to use a single PC-based application + * to load an image, load U-Boot, load an environment and then start U-Boot + * to execute the commands from the environment. Feedback is done via setting + * and reading memory locations. + */ +#define CONFIG_ENV_ADDR 0x40060000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_IN_FLASH 1 +#endif + +/* here we put our FPGA configuration... */ +#define CONFIG_MISC_INIT_R 1 + +/* Define user parameters that have to be customized most likely */ + +/* AUTOBOOT settings - booting images automatically by u-boot after power on */ + +/* + * used for autoboot, delay in seconds u-boot will wait before starting + * defined (auto-)boot command, setting to -1 disables delay, setting to + * 0 will too prevent access to u-boot command interface: u-boot then has + * to be reflashed + * beware - watchdog is not serviced during autoboot delay time! + */ +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_BOOTDELAY 1 +#else +#define CONFIG_BOOTDELAY 1 +#endif + +/* + * The following settings will be contained in the environment block ; if you + * want to use a neutral environment all those settings can be manually set in + * u-boot: 'set' command + */ + +#define _QUOTEME(x) #x +#define QUOTEME(x) _QUOTEME(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loaderversion=11\0" \ + "card_id="QUOTEME(ASTRO_ID)"\0" \ + "alterafile=0\0" \ + "xilinxfile=0\0" \ + "xilinxload=imxtract 0x540000 $xilinxfile 0x41000000&&"\ + "fpga load 0 0x41000000 $filesize\0" \ + "alteraload=imxtract 0x6c0000 $alterafile 0x41000000&&"\ + "fpga load 1 0x41000000 $filesize\0" \ + "env_default=1\0" \ + "env_check=if test $env_default -eq 1;"\ + " then setenv env_default 0;saveenv;fi\0" + +/* + * "update" is a non-standard command that has to be supplied + * by external update.c; This is not included in mainline because + * it needs non-blocking CFI routines. + */ +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_BOOTCOMMAND "" /* no autoboot in this case */ +#else +#if CONFIG_ASTRO_V532 +#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ + "run xilinxload&&run alteraload&&bootm 0x80000;"\ + "update;reset" +#else +#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ + "run xilinxload&&bootm 0x80000;update;reset" +#endif +#endif + +/* default bootargs that are considered during boot */ +#define CONFIG_BOOTARGS " console=ttyS2,115200 rootfstype=romfs"\ + " loaderversion=$loaderversion" + +#define CONFIG_SYS_PROMPT "URMEL > " + +/* default RAM address for user programs */ +#define CONFIG_SYS_LOAD_ADDR 0x20000 + +#define CONFIG_SYS_LONGHELP + +#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 +#else +#define CONFIG_SYS_CBSIZE 256 +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_SPARTAN3 +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 +#define CONFIG_SYS_FPGA_PROG_FEEDBACK +#define CONFIG_SYS_FPGA_WAIT 1000 + +/* End of user parameters to be customized */ + +/* Defines memory range for test */ + +#define CONFIG_SYS_MEMTEST_START 0x40020000 +#define CONFIG_SYS_MEMTEST_END 0x41ffffff + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/* Base register address */ + +#define CONFIG_SYS_MBAR 0xFC000000 /* Register Base Addrs */ + +/* System Conf. Reg. & System Protection Reg. */ + +#define CONFIG_SYS_SCR 0x0003; +#define CONFIG_SYS_SPR 0xffff; + +/* + * Definitions for initial stack pointer and data area (in internal SRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +#define CONFIG_SYS_INIT_RAM_END 0x8000 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * for MCF5373, the allowable range is 0x40000000 to 0x7FF00000 + */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 + +/* + * Chipselect bank definitions + * + * CS0 - Flash 32MB (first 16MB) + * CS1 - Flash 32MB (second half) + * CS2 - FPGA + * CS3 - FPGA + * CS4 - unused + * CS5 - unused + */ +#define CONFIG_SYS_CS0_BASE 0 +#define CONFIG_SYS_CS0_MASK 0x00ff0001 +#define CONFIG_SYS_CS0_CTRL 0x00001fc0 + +#define CONFIG_SYS_CS1_BASE 0x01000000 +#define CONFIG_SYS_CS1_MASK 0x00ff0001 +#define CONFIG_SYS_CS1_CTRL 0x00001fc0 + +#define CONFIG_SYS_CS2_BASE 0x20000000 +#define CONFIG_SYS_CS2_MASK 0x00ff0001 +#define CONFIG_SYS_CS2_CTRL 0x0000fec0 + +#define CONFIG_SYS_CS3_BASE 0x21000000 +#define CONFIG_SYS_CS3_MASK 0x00ff0001 +#define CONFIG_SYS_CS3_CTRL 0x0000fec0 + +#define CONFIG_SYS_FLASH_BASE 0x00000000 + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CONFIG_SYS_MONITOR_BASE CONFIG_TEXT_BASE +#else +/* This is mainly used during relocation in start.S */ +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#endif +/* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) +/* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ + (CONFIG_SYS_SDRAM_SIZE << 20)) + +/* FLASH organization */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 259 +#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 + +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_SIZE 0x2000000 +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_CFI_NONBLOCK 1 + +#if ENABLE_JFFS +/* JFFS Partition offset set */ +#define CONFIG_SYS_JFFS2_FIRST_BANK 0 +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0x40 +#endif + +/* Cache Configuration */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ + CF_CACR_DCM_P) + +#endif /* _CONFIG_ASTRO_MCF5373L_H */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 1c3ea23..330e3ac 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -331,6 +331,19 @@ from which user programs will be started */ */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /*----------------------------------------------------------------------- * Memory bank definitions * diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index 52df16a..f7290d6 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -59,7 +59,6 @@ #define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -90,8 +89,6 @@ #define CONFIG_NS8382X 1 #endif -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -169,8 +166,6 @@ #define CONFIG_BOOTCOMMAND "run flash_vxworks0" -#if defined(CONFIG_MPC5200) - #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfd010000 #define CONFIG_SYS_NVRAM_SIZE 32*1024 @@ -179,7 +174,6 @@ * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -303,13 +297,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index a81527e..f9cdcbc 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -261,13 +261,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 841affb..61e3bad 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -224,6 +224,19 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_END - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ + CF_CACR_DISD | CF_CACR_INVI | \ + CF_CACR_CEIB | CF_CACR_DCM | \ + CF_CACR_EUSP) + /* Port configuration */ #define CONFIG_SYS_FECI2C 0xF0 diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 14f7826..c5b1565 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -366,13 +366,8 @@ static inline void tws_data_config_output(unsigned output) /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index d0cb1e1..6903b36 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -324,13 +324,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index b29ef9b..d25e093 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -170,13 +170,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 4a93b58..73405ea 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -63,9 +63,6 @@ #endif #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ - #define CONFIG_MII #if 0 /* test-only !!! */ #define CONFIG_NET_MULTI 1 @@ -74,10 +71,6 @@ #define CONFIG_NS8382X 1 #endif -#else /* MPC5100 */ - -#endif - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION @@ -152,12 +145,10 @@ #define CONFIG_BOOTCOMMAND "run flash_vxworks0" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -288,13 +279,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 18e7cc2..bdc0f79 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -138,7 +138,6 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ @@ -154,7 +153,6 @@ */ #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif -#endif /* * I2C configuration @@ -276,13 +274,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 8ca55d7..80a0bc6 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -61,7 +61,6 @@ #endif #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ /* * PCI Mapping: * 0x40000000 - 0x4fffffff - PCI Memory @@ -87,7 +86,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif -#endif /* Partitions */ #define CONFIG_MAC_PARTITION @@ -121,9 +119,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE -#ifdef CONFIG_MPC5200 #define CONFIG_CMD_PCI -#endif #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ @@ -166,12 +162,10 @@ #define CONFIG_BOOTCOMMAND "run flash_vxworks0" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration */ @@ -289,13 +283,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index 5a2ef3a..060026b 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -358,13 +358,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 27dda25..d377e19 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -438,13 +438,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#else -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 -#endif #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 92bcdb3..d462ed0 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -170,12 +170,10 @@ #define CONFIG_BOOTCOMMAND "run net_nfs" -#if defined(CONFIG_MPC5200) /* * IPB Bus clocking configuration. */ #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif /* * I2C configuration diff --git a/include/fdt_support.h b/include/fdt_support.h index 0a9dd0d..a3d5f8c 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -81,5 +81,7 @@ int fdt_resize(void *blob); int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size); +void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); + #endif /* ifdef CONFIG_OF_LIBFDT */ #endif /* ifndef __FDT_SUPPORT_H */ diff --git a/include/jffs2/load_kernel.h b/include/jffs2/load_kernel.h index 8b2720e..906eb3d 100644 --- a/include/jffs2/load_kernel.h +++ b/include/jffs2/load_kernel.h @@ -78,5 +78,6 @@ struct mtdids { extern int mtdparts_init(void); extern int find_dev_and_part(const char *id, struct mtd_device **dev, u8 *part_num, struct part_info **part); +extern struct mtd_device *device_find(u8 type, u8 num); #endif /* load_kernel_h */ diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index 4dcf90c..2d343c7 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -1,7 +1,7 @@ /* * include/asm-ppc/mpc5xxx.h * - * Prototypes, etc. for the Motorola MGT5xxx/MPC5xxx + * Prototypes, etc. for the Motorola MPC5xxx * embedded cpu chips * * 2003 (c) MontaVista, Software, Inc. @@ -33,24 +33,15 @@ #include /* Processor name */ -#if defined(CONFIG_MPC5200) #define CPU_ID_STR "MPC5200" -#elif defined(CONFIG_MGT5100) -#define CPU_ID_STR "MGT5100" -#endif /* Exception offsets (PowerPC standard) */ #define EXC_OFF_SYS_RESET 0x0100 #define _START_OFFSET EXC_OFF_SYS_RESET /* useful macros for manipulating CSx_START/STOP */ -#if defined(CONFIG_MGT5100) -#define START_REG(start) ((start) >> 15) -#define STOP_REG(start, size) (((start) + (size) - 1) >> 15) -#elif defined(CONFIG_MPC5200) #define START_REG(start) ((start) >> 16) #define STOP_REG(start, size) (((start) + (size) - 1) >> 16) -#endif /* Internal memory map */ @@ -70,21 +61,12 @@ #define MPC5XXX_BOOTCS_STOP (CONFIG_SYS_MBAR + 0x0050) #define MPC5XXX_ADDECR (CONFIG_SYS_MBAR + 0x0054) -#if defined(CONFIG_MGT5100) -#define MPC5XXX_SDRAM_START (CONFIG_SYS_MBAR + 0x0034) -#define MPC5XXX_SDRAM_STOP (CONFIG_SYS_MBAR + 0x0038) -#define MPC5XXX_PCI1_START (CONFIG_SYS_MBAR + 0x003c) -#define MPC5XXX_PCI1_STOP (CONFIG_SYS_MBAR + 0x0040) -#define MPC5XXX_PCI2_START (CONFIG_SYS_MBAR + 0x0044) -#define MPC5XXX_PCI2_STOP (CONFIG_SYS_MBAR + 0x0048) -#elif defined(CONFIG_MPC5200) #define MPC5XXX_CS6_START (CONFIG_SYS_MBAR + 0x0058) #define MPC5XXX_CS6_STOP (CONFIG_SYS_MBAR + 0x005c) #define MPC5XXX_CS7_START (CONFIG_SYS_MBAR + 0x0060) #define MPC5XXX_CS7_STOP (CONFIG_SYS_MBAR + 0x0064) #define MPC5XXX_SDRAM_CS0CFG (CONFIG_SYS_MBAR + 0x0034) #define MPC5XXX_SDRAM_CS1CFG (CONFIG_SYS_MBAR + 0x0038) -#endif #define MPC5XXX_SDRAM (CONFIG_SYS_MBAR + 0x0100) #define MPC5XXX_CDM (CONFIG_SYS_MBAR + 0x0200) @@ -99,18 +81,12 @@ #define MPC5XXX_SDMA (CONFIG_SYS_MBAR + 0x1200) #define MPC5XXX_XLBARB (CONFIG_SYS_MBAR + 0x1f00) -#if defined(CONFIG_MGT5100) -#define MPC5XXX_PSC1 (CONFIG_SYS_MBAR + 0x2000) -#define MPC5XXX_PSC2 (CONFIG_SYS_MBAR + 0x2400) -#define MPC5XXX_PSC3 (CONFIG_SYS_MBAR + 0x2800) -#elif defined(CONFIG_MPC5200) #define MPC5XXX_PSC1 (CONFIG_SYS_MBAR + 0x2000) #define MPC5XXX_PSC2 (CONFIG_SYS_MBAR + 0x2200) #define MPC5XXX_PSC3 (CONFIG_SYS_MBAR + 0x2400) #define MPC5XXX_PSC4 (CONFIG_SYS_MBAR + 0x2600) #define MPC5XXX_PSC5 (CONFIG_SYS_MBAR + 0x2800) #define MPC5XXX_PSC6 (CONFIG_SYS_MBAR + 0x2c00) -#endif #define MPC5XXX_FEC (CONFIG_SYS_MBAR + 0x3000) #define MPC5XXX_ATA (CONFIG_SYS_MBAR + 0x3A00) @@ -118,22 +94,14 @@ #define MPC5XXX_I2C1 (CONFIG_SYS_MBAR + 0x3D00) #define MPC5XXX_I2C2 (CONFIG_SYS_MBAR + 0x3D40) -#if defined(CONFIG_MGT5100) -#define MPC5XXX_SRAM (CONFIG_SYS_MBAR + 0x4000) -#define MPC5XXX_SRAM_SIZE (8*1024) -#elif defined(CONFIG_MPC5200) #define MPC5XXX_SRAM (CONFIG_SYS_MBAR + 0x8000) #define MPC5XXX_SRAM_SIZE (16*1024) -#endif /* SDRAM Controller */ #define MPC5XXX_SDRAM_MODE (MPC5XXX_SDRAM + 0x0000) #define MPC5XXX_SDRAM_CTRL (MPC5XXX_SDRAM + 0x0004) #define MPC5XXX_SDRAM_CONFIG1 (MPC5XXX_SDRAM + 0x0008) #define MPC5XXX_SDRAM_CONFIG2 (MPC5XXX_SDRAM + 0x000c) -#if defined(CONFIG_MGT5100) -#define MPC5XXX_SDRAM_XLBSEL (MPC5XXX_SDRAM + 0x0010) -#endif #define MPC5XXX_SDRAM_SDELAY (MPC5XXX_SDRAM + 0x0090) /* Clock Distribution Module */ @@ -155,19 +123,15 @@ #define MPC5XXX_BOOTCS_CFG MPC5XXX_CS0_CFG #define MPC5XXX_CS_CTRL (MPC5XXX_LPB + 0x0018) #define MPC5XXX_CS_STATUS (MPC5XXX_LPB + 0x001c) -#if defined(CONFIG_MPC5200) #define MPC5XXX_CS6_CFG (MPC5XXX_LPB + 0x0020) #define MPC5XXX_CS7_CFG (MPC5XXX_LPB + 0x0024) #define MPC5XXX_CS_BURST (MPC5XXX_LPB + 0x0028) #define MPC5XXX_CS_DEADCYCLE (MPC5XXX_LPB + 0x002c) -#endif -#if defined(CONFIG_MPC5200) /* XLB Arbiter registers */ #define MPC5XXX_XLBARB_CFG (MPC5XXX_XLBARB + 0x40) #define MPC5XXX_XLBARB_MPRIEN (MPC5XXX_XLBARB + 0x64) #define MPC5XXX_XLBARB_MPRIVAL (MPC5XXX_XLBARB + 0x68) -#endif /* GPIO registers */ #define MPC5XXX_GPS_PORT_CONFIG (MPC5XXX_GPIO + 0x0000) @@ -242,14 +206,6 @@ #define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c) #define MPC5XXX_PCI_BAR0 (MPC5XXX_PCI + 0x10) #define MPC5XXX_PCI_BAR1 (MPC5XXX_PCI + 0x14) -#if defined(CONFIG_MGT5100) -#define MPC5XXX_PCI_CTRL (MPC5XXX_PCI + 0x68) -#define MPC5XXX_PCI_VALMSKR (MPC5XXX_PCI + 0x6c) -#define MPC5XXX_PCI_VALMSKW (MPC5XXX_PCI + 0x70) -#define MPC5XXX_PCI_SUBW1 (MPC5XXX_PCI + 0x74) -#define MPC5XXX_PCI_SUBW2 (MPC5XXX_PCI + 0x78) -#define MPC5XXX_PCI_WINCOMMAND (MPC5XXX_PCI + 0x7c) -#elif defined(CONFIG_MPC5200) #define MPC5XXX_PCI_GSCR (MPC5XXX_PCI + 0x60) #define MPC5XXX_PCI_TBATR0 (MPC5XXX_PCI + 0x64) #define MPC5XXX_PCI_TBATR1 (MPC5XXX_PCI + 0x68) @@ -262,7 +218,6 @@ #define MPC5XXX_PCI_ISR (MPC5XXX_PCI + 0x88) #define MPC5XXX_PCI_ARB (MPC5XXX_PCI + 0x8c) #define MPC5XXX_PCI_CAR (MPC5XXX_PCI + 0xf8) -#endif /* Interrupt Controller registers */ #define MPC5XXX_ICTL_PER_MASK (MPC5XXX_ICTL + 0x0000) @@ -495,31 +450,16 @@ struct mpc5xxx_mmap_ctl { volatile u32 cs4_stop; volatile u32 cs5_start; /* 0x002c */ volatile u32 cs5_stop; -#if defined(CONFIG_MGT5100) - volatile u32 sdram_start; /* 0x0034 */ - volatile u32 sdram_stop; /* 0x0038 */ - volatile u32 pci1_start; /* 0x003c */ - volatile u32 pci1_stop; /* 0x0040 */ - volatile u32 pci2_start; /* 0x0044 */ - volatile u32 pci2_stop; /* 0x0048 */ -#elif defined(CONFIG_MPC5200) volatile u32 sdram0; /* 0x0034 */ volatile u32 sdram1; /* 0x0038 */ volatile u32 dummy1[4]; /* 0x003c */ -#endif volatile u32 boot_start; /* 0x004c */ volatile u32 boot_stop; -#if defined(CONFIG_MGT5100) - volatile u32 addecr; /* 0x0054 */ -#elif defined(CONFIG_MPC5200) volatile u32 ipbi_ws_ctrl; /* 0x0054 */ -#endif -#if defined(CONFIG_MPC5200) volatile u32 cs6_start; /* 0x0058 */ volatile u32 cs6_stop; volatile u32 cs7_start; /* 0x0060 */ volatile u32 cs7_stop; -#endif }; /* Clock distribution module */ @@ -546,12 +486,7 @@ struct mpc5xxx_sdram { volatile u32 ctrl; volatile u32 config1; volatile u32 config2; -#if defined(CONFIG_MGT5100) - volatile u32 xlbsel; - volatile u32 dummy[31]; -#else volatile u32 dummy[32]; -#endif volatile u32 sdelay; }; @@ -564,12 +499,10 @@ struct mpc5xxx_lpb { volatile u32 cs5_cfg; volatile u32 cs_ctrl; volatile u32 cs_status; -#if defined(CONFIG_MPC5200) volatile u32 cs6_cfg; volatile u32 cs7_cfg; volatile u32 cs_burst; volatile u32 cs_deadcycle; -#endif }; diff --git a/include/mtd_node.h b/include/mtd_node.h new file mode 100644 index 0000000..5aae085 --- /dev/null +++ b/include/mtd_node.h @@ -0,0 +1,11 @@ +#ifndef _NODE_INFO +#define _NODE_INFO + +/* + * Info we use to search for a flash node in DTB. + */ +struct node_info { + const char *compat; /* compatible string */ + int type; /* mtd flash type */ +}; +#endif diff --git a/include/post.h b/include/post.h index 9fcd3ce..ff83bce 100644 --- a/include/post.h +++ b/include/post.h @@ -53,6 +53,11 @@ #define POST_FAIL_SAVE 0x80 +#define POST_BEFORE 1 +#define POST_AFTER 0 +#define POST_PASSED 1 +#define POST_FAILED 0 + #ifndef __ASSEMBLY__ struct post_test { diff --git a/include/spartan3.h b/include/spartan3.h index 30b1c2d..d5a589d 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -57,6 +57,7 @@ typedef struct { Xilinx_done_fn done; Xilinx_wr_fn wr; Xilinx_post_fn post; + Xilinx_bwr_fn bwr; /* block write function */ } Xilinx_Spartan3_Slave_Serial_fns; /* Device Image Sizes diff --git a/include/xilinx.h b/include/xilinx.h index d0799bc..2cb2e5b 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -100,5 +100,6 @@ typedef int (*Xilinx_busy_fn)( int cookie ); typedef int (*Xilinx_abort_fn)( int cookie ); typedef int (*Xilinx_pre_fn)( int cookie ); typedef int (*Xilinx_post_fn)( int cookie ); +typedef int (*Xilinx_bwr_fn)( void *buf, size_t len, int flush, int cookie ); #endif /* _XILINX_H_ */ diff --git a/lib_m68k/cache.c b/lib_m68k/cache.c index 84fb6c2..ed88178 100644 --- a/lib_m68k/cache.c +++ b/lib_m68k/cache.c @@ -22,8 +22,129 @@ */ #include +#include +#include -void flush_cache (ulong start_addr, ulong size) +volatile int *cf_icache_status = (int *)ICACHE_STATUS; +volatile int *cf_dcache_status = (int *)DCACHE_STATUS; + +void flush_cache(ulong start_addr, ulong size) { /* Must be implemented for all M68k processors with copy-back data cache */ } + +int icache_status(void) +{ + return *cf_icache_status; +} + +int dcache_status(void) +{ + return *cf_dcache_status; +} + +void icache_enable(void) +{ + icache_invalid(); + + *cf_icache_status = 1; + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr2"::"r"(CONFIG_SYS_CACHE_ACR2)); + __asm__ __volatile__("movec %0, %%acr3"::"r"(CONFIG_SYS_CACHE_ACR3)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr6"::"r"(CONFIG_SYS_CACHE_ACR6)); + __asm__ __volatile__("movec %0, %%acr7"::"r"(CONFIG_SYS_CACHE_ACR7)); +#else + __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); +#endif + + __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_ICACR)); +} + +void icache_disable(void) +{ + u32 temp = 0; + + *cf_icache_status = 0; + icache_invalid(); + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr2"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr3"::"r"(temp)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr6"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr7"::"r"(temp)); +#else + __asm__ __volatile__("movec %0, %%acr0"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(temp)); + +#endif +} + +void icache_invalid(void) +{ + u32 temp; + + temp = CONFIG_SYS_ICACHE_INV; + if (*cf_icache_status) + temp |= CONFIG_SYS_CACHE_ICACR; + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); +} + +/* + * data cache only for ColdFire V4 such as MCF547x_8x, MCF5445x + * the dcache will be dummy in ColdFire V2 and V3 + */ +void dcache_enable(void) +{ + dcache_invalid(); + *cf_dcache_status = 1; + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr4"::"r"(CONFIG_SYS_CACHE_ACR4)); + __asm__ __volatile__("movec %0, %%acr5"::"r"(CONFIG_SYS_CACHE_ACR5)); + +#endif + + __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_DCACR)); +} + +void dcache_disable(void) +{ + u32 temp = 0; + + *cf_dcache_status = 0; + dcache_invalid(); + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); + +#ifdef CONFIG_CF_V4 + __asm__ __volatile__("movec %0, %%acr0"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(temp)); +#elif defined(CONFIG_CF_V4e) + __asm__ __volatile__("movec %0, %%acr4"::"r"(temp)); + __asm__ __volatile__("movec %0, %%acr5"::"r"(temp)); + +#endif +} + +void dcache_invalid(void) +{ +#ifdef CONFIG_CF_V4 + u32 temp; + + temp = CONFIG_SYS_DCACHE_INV; + if (*cf_dcache_status) + temp |= CONFIG_SYS_CACHE_DCACR; + if (*cf_icache_status) + temp |= CONFIG_SYS_CACHE_ICACR; + + __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); +#endif +} diff --git a/post/post.c b/post/post.c index b29eb87..00e8353 100644 --- a/post/post.c +++ b/post/post.c @@ -231,6 +231,12 @@ static void post_get_flags (int *test_flags) } } +void __show_post_progress (unsigned int test_num, int before, int result) +{ +} +void show_post_progress (unsigned int, int, int) + __attribute__((weak, alias("__show_post_progress"))); + static int post_run_single (struct post_test *test, int test_flags, int flags, unsigned int i) { @@ -248,13 +254,18 @@ static int post_run_single (struct post_test *test, if (test_flags & POST_PREREL) post_log_mark_start ( test->testid ); else - post_log ("POST %s ", test->cmd); + post_log ("POST %s ", test->cmd); } + show_post_progress(i, POST_BEFORE, POST_FAILED); + if (test_flags & POST_PREREL) { - if ((*test->test) (flags) == 0) + if ((*test->test) (flags) == 0) { post_log_mark_succ ( test->testid ); + show_post_progress(i, POST_AFTER, POST_PASSED); + } else { + show_post_progress(i, POST_AFTER, POST_FAILED); if (test_flags & POST_CRITICAL) gd->flags |= GD_FLG_POSTFAIL; if (test_flags & POST_STOP) @@ -264,6 +275,7 @@ static int post_run_single (struct post_test *test, if ((*test->test) (flags) != 0) { post_log ("FAILED\n"); show_boot_progress (-32); + show_post_progress(i, POST_AFTER, POST_FAILED); if (test_flags & POST_CRITICAL) gd->flags |= GD_FLG_POSTFAIL; if (test_flags & POST_STOP) @@ -271,6 +283,7 @@ static int post_run_single (struct post_test *test, } else post_log ("PASSED\n"); + show_post_progress(i, POST_AFTER, POST_PASSED); } if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {